4-2026-05-08 Quote 52603770801 J-NTX1000GE3 Richard J. Daley SN NTX13260307.pdf

DMG MORI Chicago

Chicago TC 2400 Huntington Blvd. Hoffman Estates IL 60192

Phone:+1-847-593-5400 Fax: +1-847-593-5433

URL: http://www.dmgmori.com

Richard J. Daley

AVI college Campuses 2800 S Western

Chicago, Illinois 60608

05/08/2026

Quotation No. 52603770801

In reference to our recent discussions regarding your interest in DMG MORI product, we are pleased to provide in the subsequent pages your quote for the following machine:

Product Description : NTX 1000 3rd Generation Please refer to the following pages

Serial Number : NTX13260307

Payment terms : 30% down-payment due at the time of signed SOC/PO, 60% due N10 upon on the earlier of (i) shipment date or (ii) originally agreed shipment date if the shipment of the machine is delayed for reasons not attributable to DMG MORI, 10% due earlier of (i) installation date or (ii) 30 days after shipment. DMG MORI reserves the right to hold installation service until DMG MORI receives payment for at least 90% of the total Order Price.

Incoterms : CIP (INCOTERM 2020) Incoterms location : Customer's Lot

Delivery : Expected delivery 7/8/2026, after down payment has been received and subject to timely deliveries of DMG MORI Suppliers Valid to : 05/22/2026 Notes : Machine freight included. Customer responsible for rigging costs.

We trust that this information meets your project requirements. Please contact us should you have any further questions regarding the information presented in the following quote.

Yours Sincerely, DMG MORI Chicago

Quotation

Richard J. Daley

NTX 1000 3rd Generation

Serial Number: NTX13260307

Highlights

- Complete machining of complex shaped parts for the medical, aerospace and automotive industries

- Max. machining length 800 mm

- Thermal displacement suppression by perfectly thermo-symmetrical spindle head cooling structure (patent pending)

- Standard 6-inch (optional 8-inch) chuck on right spindle head

- Compact turn-mill spindle and turret 2 (option) avoid interference with workpiece, tool, and fixture

- Turret 2 with 680 mm swing diameter for flexible tool layout

- All stations can be equipped with a rotary tool holder.

- Automation with an in-machine traveling robot

Quote number: 52603770801

Series J1459 05/08/2026 | 3 / 45 Price status: 05/08/2026

* further description see attachment

Investment summary

Machine and Options

Basic Machine

NTX 1000 <3rd Generation> J-A02222 1 463,000.00 USD

Control Fanuc_F31iB5_Plus with CELOS X J-022267 1 0.00 USD CELOS X - ERGOline X (MAPPS) J-013093 1 0.00 USD

Spindle

(Left Spindle) through-spindle hole dia. 73 mm, 5,000 min-1 (for FANUC)

J-022103 1 4,570.00 USD

Standard spindle (Right Spindle) 22/ 18.5 / 15 kW, 6,000min-1 (FANUC)

J-022104 1 27,550.00 USD

Options for Spindle

Clamping pressure adjustment at the control for Right Spindle (Standard)

J-025532 1 0.00 USD

Clamping pressure adjustment at the control for Left Spindle (Standard)

J-025531 1 0.00 USD

Chuck for Left spindle (Main spindle)

(Left Spindle) KITAGAWA 8in. Hollow Chuck BR08A621

(SK-OP)

J-013365 1 1,880.00 USD

(Left Spindle) KITAGAWA Hollow Cylinder set for KITAGAWA 8in. Hollow Chuck BR08A621 / BR08-21B (Bar work capacity dia. 65 mm (2.55 inch)) (without chuck body)

J-013378 1 5,610.00 USD

Chuck for Right spindle (Counter spindle)

(Right Spindle) KITAGAWA 6in. Hollow Chuck

BR06A521F

J-013362 1 1,670.00 USD

(Right Spindle) KITAGAWA Hollow Cylinder set for KITAGAWA 6in. Hollow Chuck BR06A521F / BR06-21D (Bar work capacity dia. 52 mm (2.04 inch)) (without chuck body) (SK-OP)

J-013387 1 5,120.00 USD

Equipment for Chucks

Chuck foot switch (double pedal) for Left and Right Spindle (Standard)

J-025534 1 0.00 USD

Chuck cylinder stroke check (linear position monitoring) (Left Spindle) (Standard)

J-014488 1 0.00 USD

Chuck cylinder stroke check (linear position monitoring) (Right Spindle) (Standard)

J-014489 1 0.00 USD

Chuck inching function for Left Spindle (Standard) J-025535 1 0.00 USD Chuck inching function for Right Spindle (Standard) J-025536 1 0.00 USD

Turn-mill Spindle

High-speed turn-mill spindle, 20,000 min-1 (C5/HSK- A50)

J-022912 1 5,510.00 USD

Capto C5 J-005480 1 0.00 USD Turn-mill Spindle full indexing specifications (STD) J-005482 1 0.00 USD

Series J1459 05/08/2026 | 4 / 45

Options for Turret

10 Station Bolt-Tightened Turret, milling spindle (10,000 min-1, 4.6/ 2.4 kW, 4.38/2.31 Nm) (Turret 2) (BMT40)

J-022908 1 62,850.00 USD

Tailstock

Right Spindle tailstock specifications (SK-OP) J-003188 1 2,650.00 USD

Tool Magazine Tool storage capacity 76 tools (Capto C5) J-004250 1 22,600.00 USD Magazine Operation Panel (Standard) J-014068 1 0.00 USD

Coolant supply / Chip removal

Usable Coolant Type: Water-Soluble Coolant J-G00428 1 0.00 USD Coolant type detection system J-028123 1 0.00 USD Chip conveyor (right discharge, hinge type + drum filter type)

J-021881 1 0.00 USD

Super-High-Pressure Coolant System (10 MPa, variable pressure (1,450 psi)) (Through-Spindle Coolant System for turn-mill spindle)

J-013931 1 26,200.00 USD

Super-high-pressure coolant system (10 MPa, Variable Pressure Steps) for Turret 2 (FANUC)

J-022269 1 26,200.00 USD

Coolant chiller (unit on tank) (STD) J-014617 1 0.00 USD Coolant gun (SK-OP) J-003220 1 3,480.00 USD Shower Coolant J-022029 1 0.00 USD Air blow for tool tip (Turn-mill Spindle) J-022030 1 0.00 USD Air blow for chuck (Left Spindle) J-022031 1 0.00 USD Air blow for chuck (Right Spindle) J-004572 1 0.00 USD Mist collector zeroFOG #1 (mounted on separated stand) J-022039 1 0.00 USD Zero Sludge COOLANT pro (Vertical high capacity tank

900L) (Standard)

J-022274 1 0.00 USD

Zero Sludge Coolant Tank (STD) J-019850 1 0.00 USD Coolant Level sensor (upper limit, lower limit forecast and lower limit detection) (Standard)

J-022043 1 0.00 USD

Measuring / Monitoring

Full-closed loop control for X-axis (Turn-mill Spindle) (Direct scale feedback) (Standard)

J-015787 1 0.00 USD

Full-closed loop control for X-axis (Turret 2) (Direct scale feedback) (Standard)

J-015788 1 0.00 USD

Full-closed loop control for Y-axis (Turn-mill Spindle) (Direct scale feedback) (Standard)

J-015789 1 0.00 USD

Full-closed loop control for Z-axis (Turn-mill Spindle) (Direct scale feedback) (Standard)

J-015791 1 0.00 USD

Full-closed loop control for Z-axis (Turret 2) (Direct scale feedback) (Standard)

J-015792 1 0.00 USD

In-machine workpiece measuring system radio signal transmission type touch sensor (RENISHAW, RMP600)

J-017954 1 0.00 USD

Automatic in-machine tool presetter for Turn-mill Spindle (metrol) and turret 2 (renishaw) (turret 2 specifications)

J-022044 1 0.00 USD

Automation

Signal lamp 4 colors (Red, yellow, green, blue) (STD) J-011672 1 0.00 USD Workpiece unloader (Right Spindle, workpiece receiver type) + Workpiece unloading conveyor+ Workpiece stocker

J-004585 1 34,250.00 USD

Right Spindle workpiece ejector (cylinder type) J-009024 1 0.00 USD Interface for EtherNet/IP (SK-OP) J-015384 1 850.00 USD

Series J1459 05/08/2026 | 5 / 45

Interface for bar feeder (EtherNet/IP Interface, TYPE5) (Connector type) (SK-OP)

J-056318 1 1,550.00 USD

Voltage of Bar feeder Interface : 400 V J-056321 1 0.00 USD

General Options Multi dry filter J-011518 1 0.00 USD Manual pulse generator (separate type) (Standard) J-015539 1 0.00 USD Voltage of Customer Factory 400 V J-014887 1 0.00 USD Frequency 60 Hz J-G00961 1 0.00 USD Setting Unit inch J-004472 1 0.00 USD In-machine SUS cover J-022045 1 0.00 USD Hydraulic Unit Inverter device (Standard) J-022052 1 0.00 USD

Technology Cycle

Tailstock for turret (FANUC) J-015588 1 1,850.00 USD Alternating speed J-015571 1 840.00 USD 3D quickSET J-015575 1 6,760.00 USD MPC (Machine Protection Control) J-015572 1 8,100.00 USD CELOS Chatter Control (FANUC) J-022101 1 0.00 USD Measuring Pro J-056145 1 0.00 USD

Options for Control

Addition of optional block skip (soft key type 2-9) J-008244 1 835.00 USD X-Axis Direction JIS / ISO Standard J-G00618 1 0.00 USD

Screen Text Language

Screen display English J-000080 1 0.00 USD

Price machine and options 713,925.00 USD

Services

Special constructions services DMG MORI Precision Protection Program SK001 1 38,130.00 USD LOGISTICS: JK Hackl, Machine Freight-Out Los

Angeles, CA to Chicago, IL

SK002 1 9,020.00 USD

Sales company services

SV1: Standard Machine Installation Z-COST01 1 0.00 USD DMG MORI Connect Z-COST06 1 1,000.00 USD EG1: Standard Machine Training Z-COST07 1 0.00 USD

Price services 48,150.00 USD

Price machine and options 713,925.00 USD Discount machine and options (11.00 %) -78,532.00 USD Price services 48,150.00 USD

Total price 683,543.00 USD

Quotation note

Tariff 68,354.30 USD

Series J1459 05/08/2026 | 6 / 45

The referenced in this Quotation or Order is an estimate only, based on duty and tariff rates in effect as of the date of the Quotation or Order. Duty and tariff rates are subject to change and may be assessed, increased, decreased, or modified by governmental authorities at any time. Customer agrees to be responsible for the actual amount of tariffs, duties, or similar governmental charges applicable at the time of importation of the machine, regardless of the estimated Tariff Surcharge shown. The final Tariff Surcharge will be determined based on the actual amount assessed at the time of import and will be invoiced with the final machine payment. Any difference between the estimated Tariff Surcharge and the actual assessed amount will be reflected in the final invoice. In the event tariff rates are reduced prior to importation, DMG MORI will pass through any resulting reduction in the actual Tariff Surcharge reflected on the final invoice.

Total Price (with Tariff) 751,897.30 USD

Precision Protection Program

DMG MORI wants to ensure you have complete coverage for your investment.

Our industry unique Precision Protection Program can protect you against unexpected service and parts costs resulting from a breakdown or collision, arising from operator error.

Trust in us to provide you with the latest technology and superior coverage to protect your business and valued investment!

What is covered?

+ DMG MORI machinery and DMQP peripherals + Cost to repair or replace equipment damaged by a covered breakdown, including parts and labor, subject to a $1,000 deductible per claim

+ Includes coverage for the repair costs arising from operator error, including parts and labor, subject to a $1,000 deductible per claim

What is the coverage limit?

+ The Precision Protection limit is the purchase price of the equipment + Coverage is effective for a 5-year term from the start of installation

What is the cost?

+ 6% of the purchase price of the machine.

• Please note: The machine must be maintained, serviced & repaired in accordance with DMG MORI’s recommended guidelines, using only DMG MORI approved service engineers & parts

DMG MORI Connect

Streamline your production process while maximizing output and machine lifecycle.

2 years of service included during standard machine warranty.

DMG MORI Messenger Cloud

• Real time monitoring and history analysis platform

• Convenient web access from PCs and mobile devices

• Simple data exports for in-depth evaluation and reporting

DMG MORI NETservice

• Remote diagnosis supported by DMG MORI service experts

• Immediate and direct support minimizes downtime and service costs

• Secure encrypted connection

Series J1459 05/08/2026 | 7 / 45

YouTube video

Series J1459 05/08/2026 | 8 / 45

DMG MORI

NTX 1000 3rd Generation

Machine and Options USD USD

Basic Machine

NTX 1000 <3rd Generation> J-A02222* 1 463,000.00

Control

Fanuc_F31iB5_Plus with CELOS X J-022267* 1 0.00 CELOS X - ERGOline X (MAPPS)

It is a machine operation panel with 21.3-inch multi touch screen, which realizes comfortable operability. It documents, visualizes and centrally manages the order, process and machine data, allowing the networking with CAD/CAM and also the function extension using applications. The user-friendly, highly-productive MAPPS system is installed.

ERGOline X : Covered by a 5-year warranty service

J-013093 1 0.00

(Left Spindle) through-spindle hole dia. 73 mm, 5,000min-1 Left Spindle through-spindle hole dia. 73 mm Chuck and cylinder for the Left Spindle is not included in this specification.

FANUC Spec.

Output : 26 / 22 (25%ED / cont) kW Maximum spindle speed: 5,000 min-1

Maximum torque : 477 / 300 (25%ED / cont) N・ m Spindle through hole diameter: Φ73 mm (2.87 inch.)

Max. bar work capacity Φ65 mm (2.56 inch.)

J-022103 1 4,570.00

Standard spindle (Right Spindle) 22/ 18.5 / 15 kW, 6,000min-1 (FANUC)

J-022104 1 27,550.00

Series J1459 05/08/2026 | 9 / 45

Options for Spindle

Clamping pressure adjustment at the control for the Right Spindle (Standard) The input pressure (hydraulic pressure) of the chuck cylinder is set in the NC program or on the screen.

The minimum pressure that can be set is 0.8 MPa, and the maximum pressure is limited by the combination of chuck cylinder and chuck.

However, if the maximum pressure exceeds 4.0 MPa, the maximum pressure is limited to 4.0 MPa. (Depending on the hydraulic control equipment) There is one pressure setting, and its value applies to both clamping and unclamping.

If a chuck cylinder is to be arranged by the customer, be sure to use a chuck cylinder with a mechanism to prevent the workpiece from falling out when the hydraulic pressure is shut off (pilot check mechanism, check valve). In the event of hydraulic pressure shutdown due to power failure, etc., the chuck may not be able to maintain its gripping force, resulting in workpiece scattering, machine damage, and personal injury.

It is necessary to unclamp the chuck after switching the chucking pressure.

J-025532 1 0.00

Clamping pressure adjustment at the control for the Left Spindle (Standard) The input pressure (hydraulic pressure) of the chuck cylinder is set in the NC program or on the screen.

The minimum pressure that can be set is 0.8 MPa, and the maximum pressure is limited by the combination of chuck cylinder and chuck.

However, if the maximum pressure exceeds 4.0 MPa, the maximum pressure is limited to 4.0 MPa. (Depending on the hydraulic control equipment) There is one pressure setting, and its value applies to both clamping and unclamping.

If a chuck cylinder is to be arranged by the customer, be sure to use a chuck cylinder with a mechanism to prevent the workpiece from falling out when the hydraulic pressure is shut off (pilot check mechanism, check valve). In the event of hydraulic pressure shutdown due to power failure, etc., the chuck may not be able to maintain its gripping force, resulting in workpiece scattering, machine damage, and personal injury.

It is necessary to unclamp the chuck after switching the chucking pressure.

J-025531 1 0.00

Series J1459 05/08/2026 | 10 / 45

Chuck for Left spindle (Main spindle)

(Left Spindle) KITAGAWA 8-inch Hollow Chuck

BR08A621

Three-jaw hydraulic chuck manufactured by Kitagawa Iron Works.

Chuck outer diameter: Φ210 mm (dia.8.27 inch.)

Through-hole diameter: Φ66 mm (dia.2.6 inch.)

Gripping diameter: Max. Φ210 mm (dia.8.27 inch.), Min. Φ22 mm (dia.0.87 inch.)

Jaw stroke (diameter): 7.4 mm (0.29 inch.)

Plunger stroke: 16 mm (0.63 inch.)

Max. allowable pull force: 35 kN (7.86 klbf) Max. static gripping force: 90 kN (20.22 klbf) Dynamic gripping force at max. speed: 36 kN (8.09 klbf) Max. allowable speed: 5,000 min-1 *The data above are information on the chuck body. Since it may be limited by this machine specification, please check the contents of the mounted cylinder set for details.

Attention!

Please pay attention to the maximum clamping force of the chuck.

J-013365 1 1,880.00

(Left Spindle) KITAGAWA Hollow Cylinder set for KITAGAWA 8in. Hollow Chuck BR08A621 / BR08-21B (Bar work capacity dia. 65 mm (2.55 inch)) (without chuck body) Hollow cylinder and draw bar are included as a set. Chuck is not included. Please see the chuck-cylinder combination diagram for the combination with chuck and the specification.

Attention!

J-013378 1 5,610.00

Series J1459 05/08/2026 | 11 / 45

Chuck for Right spindle (Counter spindle)

(Right Spindle) KITAGAWA 6-inch Hollow Chuck

BR06A521F

Three-jaw hydraulic chuck manufactured by Kitagawa Iron Works.

Chuck outer diameter: Φ170 mm (dia.6.69 inch.)

Through-hole diameter: Φ53 mm (dia.2.09 inch.)

Gripping diameter: Max. Φ170 mm (dia.6.69 inch.), Min. Φ16 mm (dia.0.63 inch.)

Jaw stroke (diameter): 5.5 mm (0.22 inch.)

Plunger stroke: 12 mm (0.47 inch.)

Max. allowable pull force: 23 kN (5.17 klbf) Max. static gripping force: 58.5 kN (13.15 klbf) Dynamic gripping force at max. speed: 22.5 kN (5.05 klbf) Max. allowable speed: 6,000 min-1 *The data above are information on the chuck body. Since it may be limited by this machine specification, please check the contents of the mounted cylinder set for details.

Attention!

J-013362 1 1,670.00

(Right Spindle) KITAGAWA Hollow Cylinder set for KITAGAWA 6in. Hollow Chuck BR06A521F / BR06-21D (Bar work capacity dia. 52 mm (2.04 inch)) (without chuck body) Hollow cylinder and draw bar are included as a set. Chuck is not included. Please see the chuck-cylinder combination diagram for the combination with chuck and the specification.

Attention!

J-013387 1 5,120.00

Equipment for Chucks

Chuck foot switch (double pedal) for Left and

Right Spindle (Standard) This switch is used to open and close the chuck with the foot. Push the lock release plate of each chuck foot switch forward to release the lock and step on the pedal.

Two foot switches are used for opening and closing operation of the left and right spindle chuck.

J-025534 1 0.00

Chuck cylinder stroke check (linear position monitoring) (Left Spindle) The position of the chuck cylinder is read with the linear sensor and displayed as a number. The chuck clamping/unclamping position can be set on the screen for each workpiece.

J-014488 1 0.00

Series J1459 05/08/2026 | 12 / 45

Chuck cylinder stroke check (linear position monitoring) (Right Spindle) The position of the chuck cylinder is read with the linear sensor and displayed as a number. The chuck clamping/unclamping position can be set on the screen for each workpiece.

J-014489 1 0.00

Chuck inching function for Left Spindle Inching operation of chuck opening/closing is possible.

If a chuck cylinder is to be arranged by the customer, be sure to use a chuck cylinder with a mechanism to prevent the workpiece from falling out when the hydraulic pressure is shut off (pilot check mechanism, check valve). In the event of hydraulic pressure shutdown due to power failure, etc., the chuck may not be able to maintain its gripping force, resulting in workpiece scattering, machine damage, and personal injury.

J-025535 1 0.00

Chuck inching function for Right Spindle Inching operation of chuck opening/closing is possible.

If a chuck cylinder is to be arranged by the customer, be sure to use a chuck cylinder with a mechanism to prevent the workpiece from falling out when the hydraulic pressure is shut off (pilot check mechanism, check valve). In the event of hydraulic pressure shutdown due to power failure, etc., the chuck may not be able to maintain its gripping force, resulting in workpiece scattering, machine damage, and personal injury.

J-025536 1 0.00

Turn-mill Spindle

High-speed turn-mill spindle, 20,000 min-1 compactMASTER 50|400 3 years warranty for MASTER spindle.

J-022912 1 5,510.00

Capto C5 Coolant tubes conforming to ISO 22402-2 cannot be used.

If used, the clamping unit on the spindle side of the turn-mill and the ATC arm may be damaged.

J-005480 1 0.00

Turn-mill spindle full indexing specifications (Standard)

J-005482 1 0.00

Series J1459 05/08/2026 | 13 / 45

Options for Turret

10 Station Bolt-Tightened Turret, milling spindle (10,000 min-1, 4.6/ 2.4 kW, 4.38/2.31 Nm) (Turret

2) (BMT40)

10 station turret. Please refer to the axis travel diagrams and turret interference diagrams for the movable region.

Number of tool stations: 10 Shank height for square tool: 20 mm (0.98 inch.)

Shank diameter for boring bar: 32 mm (1.26 inch.)

Turret indexing time (1 station): 0.29 seconds Method for mounting tool on turret: Bolt-tightened MASTER turret : Covered by a 5-year warranty service

J-022908* 1 62,850.00

Right Spindle Tailstock Specification

The specification to push a workpiece by the center mounted in the Right Spindle chuck. This allows you to machine the tip of the workpiece.

When using Right Spindle as a tailstock, the motor equipped with a brake is installed as the spindle may be pushed back.

*The center is not included. Please purchase it separately.

J-003188 1 2,650.00

Tool Magazine

Tool Storage Capacity 76 Tools (Capto C5)

Chain-type magazine Tool Storage Capacity: 76 tools Fixed address method Max. tool diameter

- With adjacent tools: Φ70 mm (dia.2.76 inch.)

- Without adjacent tools: Φ130 mm (dia.5.12 inch.)

Max. tool length:

250 mm (9.84 inch.) (tool diameter: Φ70 mm (dia.2.76 inch.)

210 mm (8.27 inch.) (tool diameter: Φ70 mm - 130 mm (dia.2.76 inch. to 5.12 inch.)

Max. tool mass:

5 kg (11 lb.)

Max. tool moment (from gage line):

3.9 N.m (2.87 ft·lbf)

*Please refer to the separate tool restriction diagram for other restrictions.

J-004250 1 22,600.00

Series J1459 05/08/2026 | 14 / 45

Magazine operation panel Possible to check of the tool information and call at the tool setup position.

This panel also provide filter function for skip tool and life expired tool. (*1) 7-inch touch panel enables intuitive operation.

No more need to move to operation panel when tool setup.

<Tool information> Registration / display of tool number, tool life, and tool offset Display of pot number, tool name, tool image *1 Not available for Siemens control unit; can be checked in the ERGOline X-Panel.

J-014068 1 0.00

Coolant supply / Chip removal

Applicable Coolant Type: Water-Soluble Coolant If the oil-based coolant is used with the water-soluble coolant specification, it may cause poor accuracy, machine troubles or fire. It is necessary to select the oil-based coolant specification for using the oil-based coolant.

J-G00428 1 0.00

Coolant type detection system For machines with the "water-soluble coolant specification" selected, the coolant type detection sensor is installed on top of the coolant tank to automatically check whether the coolant being used is water-soluble.

The check is performed each time the operation preparation is started. If oil-based coolant is detected, an interlock will disable "cycle start," "spindle rotation," and "movement of all axes."

As the interlock cannot be reset while oil-based coolant is detected, use of the machine will be significantly restricted until the coolant is switched to water-soluble coolant.

J-028123 1 0.00

Chip Conveyor (Right Discharge, Hinge Type + Drum Filter Type) This chip conveyor is suitable for discharging all types of metal chips other than powdery ones.

Long chips are conveyed and discharged using the hinge belt. Fine chips are accumulated on the inner pan and scraped out to the discharge port with the rear side of the belt. The built-in drum filter can reduce the frequency of cleaning inside the tank.

Chip conveying capacity: 794 L/h (209.62 gph) (long chips) /13 L/h (3.43 gph) (short chips) Max. coolant throughput: 150 L/min (39.6 gpm)

J-021881 1 0.00

Series J1459 05/08/2026 | 15 / 45

Super-High-Pressure Coolant System (10 MPa, variable pressure (1,450 psi)) (Through-Spindle Coolant System for turn-mill spindle) Supplies high-pressure coolant to the tool tip from the through hole in the turn-mill spindle and tool.

Effective for removing chips, cooling a machining point and prolonging a tool life. The coolant supply path to the tool tip is a center-through type. Any pressure can be controlled by G code.

Since the pressure may not be as commanded (not reached) depending on the size of the outlet, select an appropriate tool.

Minimum controlled pressure: 1.0 MPa Maximum controlled pressure: 10 MPa *When using a high-pressure coolant system, select a mist collector because a large amount of mist is generated in the machining chamber.

*1 In case of Siemens NC, controlled by H code

J-013931 1 26,200.00

Super-high-pressure coolant system (10 MPa, Variable Pressure Steps) for Turret 2

J-022269 1 26,200.00

Coolant chiller (unit on tank) (STD) The coolant chiller cools coolant in the coolant tank according to the machine temperature.

Controlling the coolant temperature suppresses the rise in temperature of the workpiece and tool and achieves the stable machining accuracy. Be sure to select the coolant chiller when you want to use oil-based coolant. (Please consult DMG

MORI.)

As the high-pressure coolant system generates significant heat, select the coolant chiller when using the high-pressure coolant system.

J-014617 1 0.00

Coolant Gun The magnet type coolant gun is attached to the machine front. Pressing the "coolant gun" button on the operation panel activates the coolant pump, and depressing its trigger starts the coolant discharge. The coolant pump automatically stops in 2 minutes. It can be used for flushing away chips in the machining chamber.

J-003220 1 3,480.00

Shower Coolant The coolant is discharged from the nozzles attached to the ceiling inside the machine to prevent the accumulation of chips in the machine.

J-022029 1 0.00

Air Blow for Tool Tip (Turn-mill Spindle) Air is blown to the tool tip for removing chips adhering to it. The air blow to the tool tip is effective in removing debris during in-machine measurement or removing chips during dry machining. The air blow ON/OFF is controlled by the M codes.

J-022030 1 0.00

Series J1459 05/08/2026 | 16 / 45

Air Blow for Chuck (Left Spindle) Air is blown to the chuck for removing chips adhering to it. Removing the chips prevents the gripping accuracy from being impaired by the chip pinching. The air blow nozzle is installed on the upper part of chuck. The air blow ON/OFF is controlled by the M codes.

Only for MAPPS spec.

*The time until the air blow OFF can be set using the timer.

*The spindle can be jogged during the air blow using the parameters.

J-022031 1 0.00

Air Blow for Chuck (Right Spindle) Air is blown to the chuck for removing chips adhering to it. Removing the chips prevents the gripping accuracy from being impaired by the chip pinching. The air blow nozzle is installed on the upper part of chuck. The air blow ON/OFF is controlled by the M codes.

Only for MAPPS spec.

*The time until the air blow OFF can be set using the timer.

*The spindle can be jogged during the air blow using the parameters.

J-004572 1 0.00

Series J1459 05/08/2026 | 17 / 45

Mist collector zeroFOG #1 (mounted on separated stand) The mist collector collects, coolant mist and oily fumes generated during machining using the pre-filter and final filter.

Final filter is toolless and easy to replace.

When the final filter reaches the replacement time, an alert is displayed on the screen.

For FANUC or MITSUBISHI spec., the mist collector can be started/stopped by M-code command or ON/OFF button on the machine operation panel.

For SIEMENS spec., the mist collector is automatically turned on and off in conjunction with the program. (factory default). The operation mode of the mist collector can be changed on the Custom screen. Refer to the operation manual for details on operation modes and how to change them.

When the total operating time of zeroFOG exceeds 15 minutes, the mist suction is automatically stopped temporarily and the primary filter is cleaned by compressed air for 15 seconds to prevent clogging of the primary filter.

Therefore, when using zeroFOG, an additional pneumatic source flow rate of 400 L/min is required only once every 15 minutes for 15 seconds. After the cleaning operation is completed, the mist suction operation starts again.

* When the machine is painted in a specified color, the resin cover around the outer circumference of the zeroFOG is also painted in the same color. Finishing appearance: Orange peel painting.

* This specification includes a stand for mounting the mist collector.

The replacement intervals for the filters and the cleaning interval for the demister differ depending on the mist concentration inside the machining chamber.

Filter Replacement Interval

- Water-miscible coolant specification: 1000 hours

- Oil-based coolant specification: 300 to 500 hours (with Final Filter Set for High-concentration Fine Mist (#1: 5462094, #2: 5517065)) Demister Replacement Interval: 1000 hours

J-022039 1 0.00

Series J1459 05/08/2026 | 18 / 45

Zero Sludge COOLANT pro (Vertical high capacity tank 900L) This is a vertical coolant tank for thorough collection of sludge and lubricant oil (900L). The capacity allows for even long continuous operation. Oil-water separation is performed by taking advantage of the tank height, and lubricant oil is forcibly sucked in and discharged from the float-type suction port. An LED gauge indicates the remaining coolant level for improved management and maintenance.

It is placed on the right side of the machine.

This specification is compatible with water soluble coolant.

* The electrical component box installed in the vertical high capacity tank is not subject to the specified color options.

J-022274 1 0.00

Zero Sludge Coolant Tank (STD) The filter (Filster made by Industria) is installed to collect sludge in the coolant tank. In addition, for improvement of sludge collecting efficiency, a nozzle for stirring coolant is added. It improves the coolant life also by stirring the coolant.

*Since sludge is not automatically discharged, it is necessary to periodically clean the sludge in the drain cup.

*Since the stirring pump is added, the coolant temperature may rise as compared with the case where this function is not selected. (Depending on specifications and conditions.) Please select the coolant chiller as necessary.

J-019850 1 0.00

Series J1459 05/08/2026 | 19 / 45

Coolant Level sensor (upper limit, lower limit forecast and lower limit detection) It monitors the fluid level in the coolant tank.

(Detecting the upper and lower limits and and lower limit forecast)

Upper limit・lower limit：Alarm

Lower limit forecast：Display warning message

Only for MAPPS spec.

The alarm processing method when the lower limit is detected by the Coolant Level sensor can be changed on the screen. The details that can be changed are as follows.

<Alarm processing method when the lower limit is detected>

- Feed hold and Spindle stop

- Start lock In addition, when “Feed hold and Spindle stop” is selected as the alarm processing method, the timing can be changed. The details that can be changed are as follows.

<Timing of feed hold and spindle stop>

- Immediate stop

- Non-cutting stop In addition, when “Non-cutting stop” is selected for the timing of feed hold and spindle stop, the allowable time until the non-cutting stop can be set.

J-022043 1 0.00

Measuring / Monitoring

Full-closed Loop Control for X-axis (Turn-mill

Spindle) (Direct Scale Feedback) The magnetic scale is used for the X-axis position sensing of the Turn-mill Spindle. It is not susceptible to ball screw precision error or thermal displacement. The magnetic scale is mounted parallel to the X-axis of the Turn-mill Spindle, and the coordinates of the position are directly fed back to the NC unit. This enables the higher precision positioning.

Resolution: 0.01 µm (Magnescale)

J-015787 1 0.00

Full-closed Loop Control for X-axis (Turret 2) (Direct Scale Feedback) The magnetic scale is used for the X-axis position sensing of the turret 2. It is not susceptible to ball screw precision error or thermal displacement.

The magnetic scale is mounted parallel to the X-axis of the turret 2, and the coordinates of the position are directly fed back to the NC unit. This enables the higher precision positioning.

Resolution: 0.01 µm

J-015788 1 0.00

Series J1459 05/08/2026 | 20 / 45

Full-closed Loop Control for Y-axis (Turn-mill Spindle) (Direct Scale Feedback) The magnetic scale is used for the Y-axis position sensing of the Turn-mill Spindle. It is not susceptible to ball screw precision error or thermal displacement. The magnetic scale is mounted parallel to the Y-axis of the Turn-mill Spindle, and the coordinates of the position are directly fed back to the NC unit. This enables the higher precision positioning.

J-015789 1 0.00

Full-closed Loop Control for Z-axis (Turn-mill Spindle) (Direct Scale Feedback) The magnetic scale is used for the Z-axis position sensing of the Turn-mill Spindle. It is not susceptible to ball screw precision error or thermal displacement. The magnetic scale is mounted parallel to the Z-axis of the Turn-mill Spindle, and the coordinates of the position are directly fed back to the NC unit. This enables the higher precision positioning.

J-015791 1 0.00

Full-closed Loop Control for Z-axis (Turret 2) (Direct Scale Feedback) The magnetic scale is used for the Z-axis position sensing of the turret 2. It is not susceptible to ball screw precision error or thermal displacement.

The magnetic scale is mounted parallel to the Z-axis of the turret 2, and the coordinates of the position are directly fed back to the NC unit. This enables the higher precision positioning.

Resolution: 0.01 µm (Magnescale)

J-015792 1 0.00

In-machine Workpiece Measuring System Radio Signal Transmission Type Touch Sensor

(RENISHAW, RMP600)

Using the radio signal transmission type sensor mounted on the tool spindle, the workpiece is positioned and the positions of the fixture and workpiece are measured. The workpiece coordinate values read by the touch sensor are transmitted as a radio signal to the NC unit via the receiver installed inside the machine. The touch sensor is stored in the tool magazine and called to the tool spindle by automatic tool change.

- Measuring direction: +X, -X, +Y, -Y, +Z

J-017954 1 0.00

Series J1459 05/08/2026 | 21 / 45

Automatic in-machine tool presetter for Turn-mill Spindle and turret 2 (Lower turret specifications) Automatic in-machine tool presetter for the Turn-mill Spindle and Turret 2 (Turret 2 specification) allows highly efficient tool measurement, improving ease of setup.

The presetter, which is stored in the Left Spindle chuck cover, moves in/out automatically (M codes) and measures the tool in the Turn-mill Spindle.

An optical type probe sensor attached to the Turn-mill Spindle measures the tool in Turret 2.

*The type is subject to change without notice.

Turn-mill Spindle measurement: H4E-22-01S (METROL)/ Turret 2 measurement: RMP60

(RENISHAW)

*Available for the Turret 2 specification only.

Please refer to the tool presetter interference diagrams for the interference with the chuck and workpiece.

J-022044 1 0.00

Automation

Signal Lamp 4 Colors (Red, Yellow, Green, Blue)

The machine status is indicated by the LED color.

It is mounted at top front of machine so that it is visible from a distance. The power-saving, maintenance-free LEDs with a viewing angle of 360 degree is adopted. The color specification can be selected from the following two types:

<Type 1>

- Red: Various alarms

- Yellow: Program end (M02/M30)

- Green: Automatic mode operation <Type 2 (Standard)>

- Red: Immediate stop alarm

- Yellow: The cycle start prohibited

- Green: Automatic mode operation

- Blue: Operation requests such as program end (M2/M30) or low coolant warning; Operation Mode 2 *Buzzer function is not included. Please select the "Signal Lamp Buzzer" specification separately.

J-011672 1 0.00

Series J1459 05/08/2026 | 22 / 45

Workpiece unloader (Right Spindle, workpiece receiver type) + Workpiece unloading conveyor+ Workpiece stocker Finished workpiece is automatically transferred to outside of machine (right side) by workpiece unloader unit attached at upper side of right spindle, additionally transferred to workpiece bucket in front of machine by workpiece conveyor. (Workpiece clamped by Left Spindle chuck needs to be transferred to Right Spindle side before unloading to outside of machine.)

By using bar feeder in combination with this specification, unattended continuous operation is available.

* Sheet metal covers which cover workpiece unloader unit are included.

* In order to transfer workpiece from Right Spindle to receiver, workpiece ejector is required.

Max workpiece diameter: 65 mm (2.55 inch.)

Max workpiece length: 230 mm (9.05 inch.)

Max workpiece mass: 3 kg (6.6 lb.)

J-004585 1 34,250.00

Right Spindle workpiece ejector (cylinder type) This is option for the Right Spindle specifications.

A workpiece can be unloaded using the workpiece unloading device which is directly driven by an air cylinder.

J-009024 1 0.00

EtherNet/IP I/F I/F for exchanging control signals between the machine and peripheral equipment using the EtherNet/IP communication protocol. It is necessary for connecting the peripheral equipment that supports EtherNet/IP. The wiring is saved compared to normal hard wiring communication as the control signals are exchanged via the EtherNet communication. This specification includes I/F for receiving and executing emergency stop signals transmitted from peripheral equipment via separate non-LAN cable.

*The LAN cable between the machine and peripheral equipment is not included.

*When the machine is shipped, the circuit is short-circuited if there is no external device connected.

Please make sure to remove the jumper wire when installing machine at the customer's factory.

J-015384 1 850.00

Series J1459 05/08/2026 | 23 / 45

Interface for bar feeder (EtherNet/IP Interface, TYPE5) (Connector type) The connection I/F using EtherNet/IP, for the bar feeder which automatically supplies bar stock to improve the productivity. Bar feeder body is not included in this specification.

(Caution) It is necessary to arrange the guide bush or guide pipe by separate quotation.

*Because the guide bush is solid, please machining it according to the inner diameter required by the customer.

*When arranging the guide pipe, specify the pipe inner diameter in advance.

*In automated machine operations using the bar feeder, the machine door or shutter is not opened or closed for long hours.

As a result, a temperature inside the machine can rise, affecting machining accuracy.

So the mist collector is recommended that can prevent the temperature from rising.

*When using a bar feeder that cannot discharge the remaining material inside the bar feeder equipment, please arrange a workpiece unloader separately because it is necessary to discharge the remaining material into the machine.

(Although DMGMORI do not recommend it, when discharging the remaining material by dropping it onto chip conveyor without a workpiece unloader, please cut down the remaining material as much as possible before dropping it onto chip conveyor.

(If the remaining material is too long, it may get caught in chip conveyor and cause chip conveyor to break prematurely.)

*Please remove the short-circuit connector when installing machine at the customer's factory.

<Connectors prepared by DMG MORI>

HARTING CONNECTOR:

■POWER and SAFETY signal 0933 024 2716 0930 024 0251 0930 000 9901

J-056318 1 1,550.00

Voltage of Bar feeder Interface : 400 V

J-056321 1 0.00

General Options

Multi Dry Filter

It removes moisture and oil content from the compressed air supplied from the compressor. It prevents the pneumatic device malfunctions caused by the moisture and oil in the air. The auto-drain and the filter (IN / OUT) are equipped with gages respectively.

- Filter Unit: T105A-1000MSP (Maeda Shell)

J-011518 1 0.00

Series J1459 05/08/2026 | 24 / 45

Manual Pulse Generator (Separate Type) Separate type hand-held handle switch improves the operability at the setup. The separate type handle switch is connected to the operation panel with a curled cord. It can be attached to a desired place on the machine using the magnet on the back side. The separate type handle switch equipped with the high-intensity white LED as standard can also be used as a hand-held light to illuminate the workpiece machining face or the dark area where the machine light does not reach.

*There is no Manual Pulse Generator on the operation panel.

J-015539 1 0.00

Voltage of Customer Factory 400 V This machine is shipped with voltage set to 400 V specification.

Direct machine connection admissible for TN-S system only, then transformer is not needed.

When use TT or IT system, transformer is necessary for conversion.

(Caution) If the setting is incompatible, there is a possibility of trouble such as operation abnormality and alarm occurrence. Be sure to check the supply voltage, frequency and power supply system of the customer's factory.

J-014887 1 0.00

Frequency 60 Hz This machine is shipped with frequency set to 60 Hz specification.

(Caution) IF the setting is incompatible, there is a possibility of trouble such as operation abnormality and alarm occurrence. Be sure to check the supply voltage and frequency of the customer's factory.

J-G00961 1 0.00

Setting Unit, Inch The unit to be used for the screen display and program commands is set to "inch".

Turning: "Inch" specification for the turret

J-004472 1 0.00

In-machine SUS cover (SK-OP) In-machine covers material are changed from SPHC to SUS. SPHC cover might be damaged by super high pressure coolant (over 14MPa).

In order to prevent cover damage, SUS covers are used as in-machine chamber cover and turret 2 cover.

*Chuck covers are not changed.

J-022045 1 0.00

Hydraulic Unit Inverter device (Standard) A hydraulic unit with an inverter device is equipped. Controlling the speed of the motor reduces the power consumption.

* There is no inverter for hydraulic unit for high pressure that is added to the turn-mill spindle C6/HSK-A63 specification.

J-022052 1 0.00

Series J1459 05/08/2026 | 25 / 45

Technology Cycle

Tailstock for turret

Tailstock for Turret supports programming for operations of the tailstock center attached on the lower turret. With guidance support, programs can be easily created.

*Center and socket are not included.

J-015588 1 1,850.00

Alternating Speed It can suppress regenerative chattering by fluctuating spindle speed. The cycle is automatically calculated only by setting the fluctuation width in the guidance screen.

*Regenerative chatter is created by excitation resulting from the fluctuation in chip thickness. In general, the spindle speed needs to be adjusted as a countermeasure for keeping the chip thickness constant.

This function is not available when left and right spindles are synchronized(M34 or M35 command)

J-015571 1 840.00

3D quickSET It is technology cycle that measures and offsets automatically geometric tolerance of rotary axes easily on a 5-axis machine using a touch probe and a calibration sphere. When the geometric tolerances that can lead to poor-quality workpiece forms is measured, It automatically reflects the measuring result in parameters to offset the tolerance.

*Additional necessary option : In-machine measuring system (spindle) *For NTX, it is effective not only for 5-axis machining but also for machining using the B-axis.

*Before using it, please check the conditions in the machining chamber to avoid interference.

*For the customers who already own 3D quickSET tool kit, purchasing only software is possible. in this case, please select "3D Quick SET(w/o Calibration Sphere)".

J-015575 1 6,760.00

Series J1459 05/08/2026 | 26 / 45

MPC (Machine Protection Control) It monitors vibration with acceleration sensors mounted on the spindle. This technology cycle stops the spindle to minimize the damage to the machine when abnormal vibration value is detected. It is also equipped with the function to diagnose the condition of spindle bearings and imbalance. Therefore, It is useful for preventive maintenance of the spindle.

*Additional necessary NC option : none <Supplementary information for Siemens control machine> If a function equivalent to MPC 2.0 (cutting torque monitoring), which can be selected on the milling machine, J-004681 (Easy Tool Monitoring) is additionally required.

Note: MPC is a feature that minimizes the damage to the machine and no warranty in case of collisions.

J-015572* 1 8,100.00

CELOS Chatter Control (FANUC) CELOS Chatter Control uses an acceleration sensor attached to the turn-mill spindle to analyze vibrations during machining and, upon detecting chatter, suggests multiple candidate spindle speeds to suppress chatter.

J-022101 1 0.00

Measuring Pro This is a function to measure a workpiece using in-machine measuring system (spindle) touch sensor.

It is possible to program automatic measurements on a dedicated guidance screen.

In addition to various measuring functions, measuring time saving and measuring data export can be realized.

Cannot be used with special shaped touch sensors such as L-shaped probes and cross-shaped probes.

J-056145 1 0.00

Series J1459 05/08/2026 | 27 / 45

Options for Control

Addition of Optional Block Skip (Soft Key Type 2- 9) 8 optional block skip functions are added. The switches for enabling/disabling them is added on the operation panel.

(How to Use) By programming a slash "/" and the number (/n (n=2 to 9) ) following it at the beginning of a block and turning on the optional block skip switch with the same number as programmed on the screen or machine operation panel, the information of the block is ignored in the DNC or memory operation.

Turning off the optional block skip switch n enables the information of the block with n.

Namely, the block including /n can be skipped by the operator's selection.

J-008244 1 835.00

X-axis Direction, JIS/ISO-compliant The X-axis movement direction is compliant with the JIS/ISO standard.

J-G00618 1 0.00

Screen Text Language

Screen display English

Language on MAPPS Screen: English Language on MAPPS Warning Screen: English Language on NC Screen: English Language on PC Screen: English

J-000080 1 0.00

Price machine and options 713,925.00

Services USD USD

Special constructions services

DMG MORI Precision Protection Program

SK001 1

38,130.00

LOGISTICS: JK Hackl, Machine Freight-Out Los Angeles, CA to Chicago, IL

SK002 1

9,020.00

Sales company services

SV1: Standard Machine Installation Z-COST01 1 0.00 DMG MORI Connect

A 2-year subscription of DMG MORI connectivity software:

+ Messenger Cloud - Machine monitoring through web application + NETservice 4.0 - Remote service by DMG MORI Hotline via CELOS APP *NETservice is only available on machines with IoTconnector

Z-COST06 1 1,000.00

EG1: Standard Machine Training Z-COST07 1 0.00

Series J1459 05/08/2026 | 28 / 45

Price services 48,150.00

Price machine and options 713,925.00 Discount machine and options (11.00 %) -78,532.00 Price services 48,150.00

Total price 683,543.00

Series J1459 05/08/2026 | 29 / 45

Attachment

Technical Description

J-A02222

Basic machine NTX1000 The specifications below apply to a basic machine without additional options. Specifications in square brackets [ ] are values or features for a machine with additional options.

Capacity

Max. Workpiece swing diameter mm (in.) φ450 (17.7) Swing over cross slide mm (in.) φ450 (17.7) Max. distance between centers mm (in.) 1,050 (41.3) Max. turning diameter <Turn-mill Spindle / Turret 2> mm (in.) φ430 (16.9) / [φ274 (10.7)]

Max. turning length mm (in.) 800 (31.4) Bar work capacity mm (in.) φ52 (2.1) [φ65 (2.6)]

Travel

X1-axis <Turn-mill Spindle> mm (in.) 455 (17.9) <-105 – +350 (-4.1

– +13.8)>

Y-axis <Turn-mill Spindle> mm (in.) ±105 (±4.1) Z1-axis <Turn-mill Spindle + ATC travel> mm (in.) 800+165 (31.5 + 6.5) B-axis <Turn-mill Spindle> ±120°

X2-axis <turret 2> mm (in.) [160 (6.3)] Z2-axis <turret 2> mm (in.) [730 (28.7)]

Left Spindle

Maximum spindle speed min-1 6,000 [5,000]

Number of spindle speed ranges steps 2 <winding>

Type of spindle nose JIS A2-5 [A2-6]

Through-spindle hole diameter mm (in.) φ61 (2.4) [φ73 (2.9)] Minimum spindle indexing increment 0.0001°

Spindle bearing inner diameter mm (in.) φ100 (3.9) [φ120 (4.7)] Spindle torque :

- 15%ED / 30 min / cont N·m (ft·lbf) 252 / 177 / 159

(185.8 / 130.5 / 117.2)

- 25%ED / cont N·m (ft·lbf) [477 / 300]

(351.8 / 221.2) Right Spindle <Option>

Maximum spindle speed min-1 [6,000] Number of spindle speed ranges steps [2 <winding>] Type of spindle nose [JIS A2-5]

Through-spindle hole diameter mm (in.) [φ61 (2.4)] Minimum spindle indexing increment [0.0001°] Spindle bearing inner diameter mm (in.) [φ100 (3.9)]

Spindle torque <15%ED / 30 min / cont> N·m (ft·lbf) [252 / 177 / 159

Series J1459 05/08/2026 | 30 / 45

(185.8 / 130.5 / 117.2)]

Turn-mill Spindle <Turret 1>

Number of tool stations Tool 1

Min. B-axis indexing increment 0.0001°

Turn-mill Spindle speed min-1 12,000 [20,000]

Taper hole of rotary Turn-mill Spindle C5 [HSK-A50 (T50)] Tool magazine Tool 38 [76] Max. tool diameter <with adjacent tools> mm (in.) φ70 (2.7) Max. tool diameter <without adjacent tools> mm (in.) φ130 (5.1) Max. tool length

<Tool diameter smaller than φ70 mm (2.8 in.)> mm (in.) 250 (9.8)

Max. tool length

<Tool diameter larger than φ70 mm (2.8 in.)> mm (in.) 210 (8.2)

Max. tool mass kg (lb.) 5 (11) Tool changing time <Tool-to-tool> sec 2.26

Spindle torque <25%ED / 10%ED / cont> <Fanuc> N·m (ft·lbf) 35 / 59.7 / 21.9

(25.8 / 44.0 / 16.1)

Turret 2 <Option>

Number of tool stations <Rotary tool mounting capacity>

Tool [10 <10>]

Turret indexing time (adjacent station) sec [0.29] Shank height for square tool mm (in.) [20 (0.8)] Shank diameter for boring bar mm (in.) [Max. 32 (1.3)] Rotary Turn-mill Spindle speed min-1 [10,000]

Spindle torque (15%ED / cont) N·m (ft·lbf) [4.38 / 2.31 (3.2 / 1.7)]

Tailstock spindle diameter mm (in.) 80 (3.1) Taper hole of tailstock spindle:

- Live center MT4

- Built-in center [MT3] Tailstock travel mm (in.) 820 (32.3)

Feedrate

Rapid traverse rate:

- X-axis mm / min 40,000

- Y-axis mm / min 40,000

- Z-axis mm / min 50,000

- A-axis mm / min [36,000]

- X2-axis mm / min [28,000]

- Z2-axis mm / min [36,000]

- B-axis min-1 100

- C-axis min-1 250

Motors

Series J1459 05/08/2026 | 31 / 45

Left Spindle drive motor:

- 15%ED / 30 min / cont kW (HP) 22 / 18.5 / 15

- 25%ED / cont kW (HP) [26 / 22] Right Spindle drive motor <15%ED / 30 min / cont > kW (HP) [22 / 18.5 / 15] Turn-mill Spindle drive motor <25%ED / 10%ED / cont> kW (HP) 11 / 7.5 / 7.5

Turret 2 rotary Milling Spindle drive motor <15%ED / cont > kW (HP) [4.6 / 2.4]

Tank Capacity

Coolant tank capacity L (gal.) 1,180

Machine Size

Machine height mm (in.) 2,586

Floor space <width x depth>

<excluding chip conveyor>:

- Tool storage capacity: 38 tools mm (in.) 5,015 x 3,330

- Tool storage capacity: 76 tools mm (in.) [5,395 x 3,330] Mass of machine kg (lb.) 11,500 [12,000 ]

J-022267

NC Unit F31iB5 plus

Controlled axes

Controlled axes Turn-mill spindle <Turret 1> side:

X, Z, C, Y, B, A Turret 2 side:

X, Z, C,…