5-2026-05-08 Quote 52603771201 J-LASERTEC30SLMUS Richard J. Daley AVI college Campuses SN LT30S251004 REV1.pdf

DMG MORI Chicago

Chicago TC 2400 Huntington Blvd. Hoffman Estates IL 60192

Phone:+1-847-593-5400 Fax: +1-847-593-5433

URL: http://www.dmgmori.com

Richard J. Daley

AVI college Campuses 2800 S Western

Chicago, Illinois 60608

05/08/2026

Quotation No. 52603771201

In reference to our recent discussions regarding your interest in DMG MORI product, we are pleased to provide in the subsequent pages your quote for the following machine:

Product Description : LASERTEC 30 SLM US Please refer to the following pages

Serial Number : LT30S251004

Payment terms : 30% down-payment due at the time of signed SOC/PO, 60% due N10 upon on the earlier of (i) shipment date or (ii) originally agreed shipment date if the shipment of the machine is delayed for reasons not attributable to DMG MORI, 10% due earlier of (i) installation date or (ii) 30 days after shipment. DMG MORI reserves the right to hold installation service until DMG MORI receives payment for at least

90% of the total Order Price.

Incoterms : CIP (INCOTERM 2020)

Incoterms location : Customer's Lot Delivery : Expected delivery 6/30/2026, after down payment has been received and subject to timely deliveries of DMG MORI Suppliers Valid to : 05/22/2026

Notes : Machine freight included. Customer responsible for rigging costs.

We trust that this information meets your project requirements. Please contact us should you have any further questions regarding the information presented in the following quote.

Yours Sincerely, DMG MORI Chicago

Quotation for

Richard J. Daley AVI college Campuses

LASERTEC 30 SLM US

Serial Number: LT30S251004

Highlights

- Additive Manufacturing with a 300 x 300 x 320 mm building volume

- Adaptive Beam Control Technology for optimizing precision and productivity

- Optimized 3D Flow Technology for improved material properties

- High precision building of 3D parts with layer thicknesses between 20 and 100 μm

- 1200 W programmable laser source capable of 7 discrete laser profiles

- Non-contact recoater technology

- Ideal process chain with post processing done on platforms such as NHX or NTX

Quote number: 52603771201

Series J-LASERTEC30_SLM_C02 valid 12/01/2024 - 12/31/4000

05/08/2026 | 3 / 19 Price status: 03/06/2026

* further description see attachment

Investment summary

Machine and Options

Basic Machine

LASERTEC 30 SLM US J-A02147 1 549,000.00 USD

Control CELOS SLM for LASERTEC 30 SLM US J-014069 1 0.00 USD

Options

Process-Control File J-015846 1 0.00 USD Adaptive Beam Control J-026576 1 0.00 USD Full-closed loop control for Z-axis (Direct scale feedback)

J-026572 1 0.00 USD

Laser Oscillator (1.2 kW) J-026575 1 0.00 USD Powder Tanks (2 Tank Specification) J-026562 1 0.00 USD Powder Bed Camera J-026568 1 0.00 USD High Flow Gas Recirculation Pump and System J-026574 1 4,800.00 USD Material used for machine qualification testing (Other) J-026602 1 on request USD

Automation

Signal lamp 4 colors (Red, yellow, green, blue) (STD) J-011672 1 0.00 USD

General Options Air purge for Operation panel and Electrical cabinet

(Standard)

J-026637 1 0.00 USD

Air purge for Laser Oscillator J-026571 1 0.00 USD Voltage of Customer Factory 400 V J-014887 1 0.00 USD Frequency 60 Hz J-G00961 1 0.00 USD Setting Unit mm J-004471 1 0.00 USD

Screen Text Language

Screen display English J-000080 1 0.00 USD

Packing / Transport / Installation Packing and Transportation charge ( Domestic U.S.) J-026577 1 0.00 USD

Special constructions

***ODS 2603-0173-A*** SK001 1 0.00 USD

Material TI64: Used for factory qualification testing SK002 1 13,750.00 USD

Price machine and options 567,550.00 USD

Services

Options for MAPPS / SIEMENS / CELOS Control*

IoTconnector (SK-OP) J-011731 1 0.00 USD

Special constructions services DMG MORI Precision Protection Program SK003 1 29,120.00 USD LOGISTICS: JK Hackl, Machine Freight-Out New Jersey to Chicago, IL

SK004 1 7,150.00 USD

Sales company services

SV1: Standard Machine Installation Z-COST01 1 0.00 USD DMG MORI Connect Z-COST06 1 1,000.00 USD

12/01/2024 - 12/31/4000

05/08/2026 | 4 / 19

EG1: Standard Machine Training Z-COST07 1 0.00 USD

Price services 37,270.00 USD

Price machine and options 567,550.00 USD Discount machine and options (14.50 %) -82,295.00 USD Price services 37,270.00 USD

Total price 522,525.00 USD

Quotation note

Tariff USD

The referenced in this Quotation or Order is an estimate only, based on duty and tariff rates in effect as of the date of the Quotation or Order. Duty and tariff rates are subject to change and may be assessed, increased, decreased, or modified by governmental authorities at any time. Customer agrees to be responsible for the actual amount of tariffs, duties, or similar governmental charges applicable at the time of importation of the machine, regardless of the estimated Tariff Surcharge shown. The final Tariff Surcharge will be determined based on the actual amount assessed at the time of import and will be invoiced with the final machine payment. Any difference between the estimated Tariff Surcharge and the actual assessed amount will be reflected in the final invoice. In the event tariff rates are reduced prior to importation, DMG MORI will pass through any resulting reduction in the actual Tariff Surcharge reflected on the final invoice.

Total Price (with Tariff) USD

Precision Protection Program

DMG MORI wants to ensure you have complete coverage for your investment.

Our industry unique Precision Protection Program can protect you against unexpected service and parts costs resulting from a breakdown or collision, arising from operator error.

Trust in us to provide you with the latest technology and superior coverage to protect your business and valued investment!

What is covered?

+ DMG MORI machinery and DMQP peripherals + Cost to repair or replace equipment damaged by a covered breakdown, including parts and labor, subject to a $1,000 deductible per claim

+ Includes coverage for the repair costs arising from operator error, including parts and labor, subject to a $1,000 deductible per claim

What is the coverage limit?

+ The Precision Protection limit is the purchase price of the equipment + Coverage is effective for a 5-year term from the start of installation

What is the cost?

+ 6% of the purchase price of the machine.

12/01/2024 - 12/31/4000

05/08/2026 | 5 / 19

• Please note: The machine must be maintained, serviced & repaired in accordance with DMG MORI’s recommended guidelines, using only DMG MORI approved service engineers & parts

DMG MORI Connect

Streamline your production process while maximizing output and machine lifecycle.

2 years of service included during standard machine warranty.

DMG MORI Messenger Cloud

• Real time monitoring and history analysis platform

• Convenient web access from PCs and mobile devices

• Simple data exports for in-depth evaluation and reporting

DMG MORI NETservice

• Remote diagnosis supported by DMG MORI service experts

• Immediate and direct support minimizes downtime and service costs

• Secure encrypted connection

YouTube video

12/01/2024 - 12/31/4000

05/08/2026 | 6 / 19

DMG MORI Manufacturing USA

Machine and Options USD USD

Basic Machine

Machine for production of high precision 3D parts using SLM powder bed process

- Machine inclusive of: 19" display

- Process chamber incl: integrated gloves computer controlled inert gas circuit incl. pressure and oxygen control gas filtration system build chamber dimensions (300 x 300 x 320 mm) Recoater including patented electrostatic smoothing technology Optical system incl:

X/Y scanning system; digital control quartz glass F-Theta optic minimal gaussian focus diameter 80 um / minimum ring focus diameter 220 um Water and glycol cooled incl. chiller Enclosed laser cabinet (laser class 1) with laser safety window Electrical system incl:

Machine Supply Voltage 400 V Machine Supply Frequency 50-60 hz UL electrical cabinet and design manufactured in house Machine Control Voltage 24 V Beckhoff TwinCAT with EtherCAT control system High Performance Industrial PC (16 GB RAM) FPGA Laser and Scanner Control Powder system incl:

Static powder diverter for uniform distribution and splitting of powder Layer wise powder dosing device for precise metering of material Weight: Approx 2500 kg (without powder)

J-A02147* 1 549,000.00

12/01/2024 - 12/31/4000

05/08/2026 | 7 / 19

Control

CELOS SLM for LASERTEC 30 SLM US Software for programming and operating machine.

Apps incl:

Rdesigner Material Management Manual Control Job Control Job History Watcher Settings

J-014069 1 0.00

Options

Process-Control File

File for the production of metal components using the SLM process for 1 given material and 1 layer thickness in both traditional (mode 0) and hybrid (mode 0/6) strategies

J-015846 1 0.00

Adaptive Beam Control This function enables the programmatic control of the machine’s 1) laser power and 2) scan speed, based on either a customer or 3rd party generated layer-wise correction file. File formats can be either .JSON or .CSV

J-026576 1 0.00

Full-closed loop control for Z-axis (Direct scale feedback) Magnescale SmartScale linear encoder with

0.001 um resolution.

J-026572 1 0.00

Laser Oscillator (1.2 kW) Semiconductor laser that can emit lasers of up to

1.2 kW. The laser wavelength is 1070±10 nm. A pilot laser can also be used to check the optical axis position and the position of the processing point. The laser has programmable index settings 0-6 from gaussian to ring

J-026575 1 0.00

Powder Tank (2 Tank Specification) Stainless Steel Tanks capable of holding over 50 liters of metal powder in a variety of alloys Integrated 2" sanitary connections top and bottom Integrated 2" butterfly valves for isolation when loading/unloading or in storage Integrated valve position sensors 2x Quick disconnects for Argon Line Connections Powder baffle technology for consistent flow rate regardless of fill volume

J-026562 1 0.00

12/01/2024 - 12/31/4000

05/08/2026 | 8 / 19

Powder Bed Camera A 5.1 megapixel GigE camera located in an off-axis position to observe the state of the powder bed. The powder bed is the area where selectively melted components are produced, the camera captures images after completion of melting and recoating.

J-026568 1 0.00

High Flow Gas Recirculation Pump and System Shielding gas: Argon Gas tight blower capable of volumetric flowrates in the machine up to 2000 LPM in either Ar or N to ensure adequete filtration of process by products.

J-026574 1 4,800.00

Material used for machine qualification testing (Other) Material used for Machine Qualification Testing:

Other (ODS required). Select other when desired material is not available as a standard option.

J-026602 1 on request

Automation

Signal Lamp 4 Colors (Red, Yellow, Green, Blue)

The machine status is indicated by the LED color.

It is mounted at top front of machine so that it is visible from a distance. The power-saving, maintenance-free LEDs with a viewing angle of 360 degree is adopted. The color specification can be selected from the following two types:

<Type 1>

- Red: Various alarms

- Yellow: Program end (M02/M30)

- Green: Automatic mode operation <Type 2 (Standard)>

- Red: Various alarms

- Yellow: The cycle start prohibited

- Green: Automatic mode operation

- Blue: During Operation mode 2/3 being selected *Buzzer function is not included. Please select the "Signal Lamp Buzzer" specification separately.

J-011672 1 0.00

12/01/2024 - 12/31/4000

05/08/2026 | 9 / 19

General Options

Air Purge for Operation Panel and Electrical

Cabinet Raises the air pressure inside the operation panel and the electrical cabinet. It prevents dust from entering the inside of operation panel and electrical cabinet. This is effective for carbon and graphite machining. When the handle of the residual pressure exhaust valve on the pneumatic unit mounting panel is opened, the air of the air purge is supplied to the operation panel and the electrical cabinet.

*Consumption air flow rate: 40 L/min

J-026637 1 0.00

Air purge for Laser Oscillator and Optics Module To keep critical Laser and Optical elements free from dust and possible containmnents air purging is included as a standard on the machine. This ensures a wide range of installation environments and consistent machine operation

J-026571 1 0.00

Voltage of Customer Factory 400 V This machine is shipped with voltage set to 400 V specification.

Direct machine connection admissible for TN-S system only, then transformer is not needed.

When use TT or IT system, transformer is necessary for conversion.

(Caution) If the setting is incompatible, there is a possibility of trouble such as operation abnormality and alarm occurrence. Be sure to check the supply voltage, frequency and power supply system of the customer's factory.

J-014887 1 0.00

Frequency 60 Hz This machine is shipped with frequency set to 60 Hz specification.

(Caution) IF the setting is incompatible, there is a possibility of trouble such as operation abnormality and alarm occurrence. Be sure to check the supply voltage and frequency of the customer's factory.

J-G00961 1 0.00

Setting Unit, MM The unit to be used for the screen display and program commands is set to "millimeter (mm)".

Turning: "MM" specification for the turret.

J-004471 1 0.00

12/01/2024 - 12/31/4000

05/08/2026 | 10 / 19

Screen Text Language

Screen display English

Language on MAPPS Screen: English Language on MAPPS Warning Screen: English Language on NC Screen: English Language on PC Screen: English

J-000080 1 0.00

Packing / Transport / Installation

Packing and Transportation charge ( Domestic

U.S.)

Packing and Transportation charge for Domestic U.S. -- not including Canada and Mexico

J-026577 1 0.00

Special constructions

***ODS 2603-0173-A***

SK001 1

0.00

Material TI64: Used for factory qualification testing

SK002 1

13,750.00

Price machine and options 567,550.00

Services USD USD

Options for MAPPS / SIEMENS / CELOS Control*

IoTconnector

The IoTconnector allows the use of online services of DMG MORI (e.g. NETservice)

J-011731* 1 0.00

Special constructions services

DMG MORI Precision Protection Program

SK003 1

29,120.00

LOGISTICS: JK Hackl, Machine Freight-Out New Jersey to Chicago, IL

SK004 1

7,150.00

Sales company services

SV1: Standard Machine Installation Z-COST01 1 0.00 DMG MORI Connect

A 2-year subscription of DMG MORI connectivity software:

+ Messenger Cloud - Machine monitoring through web application + NETservice 4.0 - Remote service by DMG MORI Hotline via CELOS APP *NETservice is only available on machines with IoTconnector

Z-COST06 1 1,000.00

EG1: Standard Machine Training Z-COST07 1 0.00

Price services 37,270.00

12/01/2024 - 12/31/4000

05/08/2026 | 11 / 19

Price machine and options 567,550.00 Discount machine and options (14.50 %) -82,295.00 Price services 37,270.00

Total price 522,525.00

12/01/2024 - 12/31/4000

05/08/2026 | 12 / 19

Attachment

Technical Description

J-A02147

Basic machine LASERTEC 30 SLM US High precise machine LASERTEC 30 SLM US Machine for precision building of 3D parts with layer thicknesses between 20 and 100 μm.

General information about the machine

Characteristic value Nominal value (Building up) Volume ( X x Y x Z) 300 x 300 x 320 mm Layer thickness 20 – 100 μm Laser type Fiber laser Laser power (depending on laser type) 1200 W Software CELOS SLM Material Example materials used in SLM: Tool steel, stainless steel, cobalt chrome alloys, titanium, aluminum, precious metal alloys, Inconel

Connection data All values depending on the respective machine version!

Main connection: (3N / PE) 60 Hz 400 V +/- 10% Power consumption: (see planning documents) Required mains fuse: (see planning documentation) Required short-circuit power: (see planning documentation) For details see planning documents / details please see in the planning documents

Required footprint / space The required footprint and space of the LASERTEC 30 SLM US is defined by the outer dimension of the machine as well as the swivel arm of the monitor. Moreover sufficient space for an appropriate operation of the machine is required additionally.

The doors of the machine are opening outwards of the machine, so additional space is required for an appropriate operation and maintenance of the machine.

The whole machine can be operated on a floor space of approx. 4,7 x 2,7 meter. (Includes the space for moving the powder containers). A minimum height of 2,7 meter of the room is required.

A detailed floorplan is available in the planning documents for this machine type.

Installation site requirements Note!

The customer is responsible for the correct system location.

Should problems arise later on due to failure to follow the information provided, DMG MORI cannot be held responsible.

Environmental protection requirements

• The system must be installed according to the requirements of the local environmental protection laws.

• The system must only be installed in enclosed rooms.

12/01/2024 - 12/31/4000

05/08/2026 | 13 / 19

Bottom plate The installation surface must have been checked and approved by a structural engineer. Relevant details are provided in machine planning documentation.

• The bottom plate must not feature any expansion joints, cracks, cable ducts or other disruption in the area covered by the complete system.

• The floor at the installation area must be hard, not slanted, and even with a tolerance of < 5 mm/m².

• The installation surface may not give way due to the system load or external influences.

• The floor must be free from interfering vibration and shocks.

Properties of the flooring The flooring must feature the following properties:

• The surface must be easy to clean and suitable for wet cleaning.

• The surface must be slip-proof.

• The surface must be designed so that it prevents metal powder from sticking to it.

• The flooring must be designed so that it is solvent-resistant.

• The flooring must be electrically conductive or feature antistatic properties.

Load bearing capacity of the floor Have the load bearing capacity of the floor checked by a structural engineer.

The following weights must be taken into account:

• The maximum installation weight of the system.

• The maximum weight:

- of tool and accessory cabinets including contents.

- of workpieces and devices.

- of persons.

- of transport means.

- of other devices in immediate proximity to the system.

Basement ceilings, story ceilings If the system must be installed on basement ceilings, story ceilings or other supporting structures, the following must be observed.

Have a structural engineer experienced in construction dynamics check the following:

• whether the supporting structure can absorb the effects of the machine's mass forces.

Access Adequately large access openings must be available for transporting the system to its installation site.

Laser Ytterbium Fiber Laser , 1200 W CW Type: AFX -1000

Installation The installation will be done at customer`s site by a DMG MORI service engineer.

Electrical connection The electrical connection of the machine will be done during installation by a DMG MORI Service engineer.

If the machine will be operated in a region with a lot of interruption of electrical supply, the usage of an Uninterruptible Power Supply (UPS) or a separate power supply unit has to be taken in consideration

12/01/2024 - 12/31/4000

05/08/2026 | 14 / 19

Power supply The voltage and the frequency must match the nominal values in the table "Connection data".

Protective measures The electrical equipment of the machine is designed in such a way that the operator can select the protective measures according to local conditions.

Protection and circuit breaker must be provided at the installation location in accordance with the specifications in the table "Connection data".

Connector Information on the used connector on the back of the LASERTEC 30 SLM US and on the laser water cooler (if ordered) can be found in the table "Additional data"

Connection of shielding gas The connection of the machine is carried out during commissioning by a DMG MORI assembly engineer.

Supply of shielding Gas The purity and pressure of the gas provided must be consistent with the nominal values of the "Connection data" table

Network connection The machine has a network connection. The exact specifications can be found in the table "Connection data"

Storage of metal powder The following measures have to be considered for the metal powder storage.

- Store metal powders only in closed containers compliant with local rules and regulations

- Metal powder should not be stored in humid environments.

Metal powder, which has been exposed to moisture, can lower the component quality or even cause the machine to malfunction.

- If possible, keep the machine chamber door closed to protect the metal powder already present in the machine from moisture.

- Highly flammable metal powders (e.g., titanium powder) must be stored according to local and national regulations.

For further information on the safe handling of metal powders and their storage, please contact your local DMG MORI office for safety.

12/01/2024 - 12/31/4000

05/08/2026 | 15 / 19

J-011731

IoTconnector The IoTconnector enables to use the DMG MORI online services (eg NETservice). Thanks to an integrated firewall, the machine is protected against attacks despite the online connection. In addition, the IoTconnector receives security updates via an integrated DEVICE MANAGEMENT.

12/01/2024 - 12/31/4000

05/08/2026 | 16 / 19

DMG MORI USA INC.

GENERAL TERMS & CONDITIONS

These terms and conditions of sale (“Terms”) are the only terms which govern the sale of goods and/or services (“Goods” ) by DMG MORI USA, Inc., or its affiliates (collectively “DMG MORI”) to Buyer and DMG MORI will only sell the Goods subject to these Terms. All quotations, proposals, all Buyer’s purchase orders, all service, and all confirmations or acknowledgments of Buyer’s purchase orders by DMG MORI are subject to these Terms. These Terms prevail over any of Buyer’s general terms and conditions of purchase regardless whether or when Buyer has submitted its purchase order or such terms. Buyer’s written acknowledgment or payment of a deposit for the Goods shall be construed as Buyer’s acceptance of these Terms. No additional or other terms wi ll be binding on DMG

MORI unless accepted in writing signed by a duly authorized representative of DMG MORI. Notwithstanding anything herein to the contrary, if a written contract signed by both parties is in existence covering the sale of the Goods covered hereby, the terms and conditions of said contract shall prevail to the extent they are inconsistent with these Terms. The “Buyer” herein refers to the customer of

DMG MORI as listed on the purchase or sales order regardless of form (“Order”).

PRICES. Unless otherwise noted, all prices quoted are subject to change without notice. Prices do not include sales, use, excise, VAT, GST, property or similar taxes arising out of or relating to the sale or use of the Goods. Buyer shall indemnify, defend and hold DMG MORI harmless from and against the imposition and payment of such taxes, whether or not they are stated in any invoice for the

Goods. DMG MORI, at its option, may at any time separately bill Buyer and Buyer shall pay for any taxes not included in DMG MORI’s invoice. Any prices provided in a DMG MORI quotation or confirmed purchase order are based on the duties and tariffs in effect as of the date of issuance of the quote and are subjec t to change as a result of any changes in the applicable duties and / or tariffs arising after the date of the quote.

PAYMENT TERMS. Unless otherwise mutually agreed to by the parties in writing, Buyer shall pay to DMG MORI such amounts according to the following payment schedule: 30% down-payment due at the time of signed Order; 60% due upon on the earlier of (i) Shipment or (ii) originally agreed shipment date if the shipment of the machine is delayed for reasons not attributable to DMG MORI; 10% due earlier of (i) installation date, (ii) 30 days after Shipment or (iii) immediately after the machine is first used for commercial production. Shipment shall mean when DMG MORI delivers the Goods to a carrier for shipment to Buyer. DMG MORI reserves the right to hold installation service until DMG MORI receives payment for at least 90% of the total Order Price. If acceptance of the Goods by

Buyer (which shall not be unreasonably withheld) after Shipment by DMG MORI is delayed more than thirty (30) days from the date of delivery of the Goods because of conditions other than the Goods or services provided by DMG MORI, including but not limited to delay in the provision of goods or services by Buyer or other suppliers, Buyer will pay to DMG MORI as interest 0.4% of the amount due and payable per week until acceptance by Buyer. Receipt and subsequent bank deposit of a down payment shall not be construed as acceptance of the purchase order until said order is accepted in writing by DMG MORI. In the event of legal action to enforce these Terms, Buyer shall reimburse DMG MORI for its reasonable costs and attorney’s fees. DMG MORI reserves the right to cancel and to refuse to complete Buyer's purchases if, in DMG MORI's opinion, Buyer has not established credit to promptly meet the payment terms of the order. Acceptance and payment by Buyer with respect to the Goods shipped by DMG MORI shall not be delayed because of any delay in shipment by DMG MORI of accessory or ancillary equipment not essential to the operation of the Goods already shipped; in such event, the payment terms set forth in this paragraph shall be applicable to the Goods shipped as of the date of Shipment and to subsequent Shipments of Goods as they occur.

DMQP, PARTS, AND SERVICE PAYMENT TERMS, CANCELLATIONS AND RETURNS. Excluding items or service included in machine Orders, Buyer shall pay all other DMG MORI invoices (30) days from invoice date. Late payment shall bear interest in the amount of 0.4% of the amount due per week. DMG MORI reserves the right to cancel and to refuse to complete Buyer's purchases if, in DMG MORI's opinion, Buyer has not established credit or promptly meet the payment terms. Requests for cancellations must be made within 24 hours of the order. Requests for returns must be made within 30 days of Shipment. All returned parts must be authorized in advance, must be in original condit ion and the return packaging must contain the return authorization number and pass DMG

MORI inspection.

DELIVERY. DMG MORI will exert its best efforts to cause the Goods to be shipped in accordance with its quotations and these Terms. However, all dates stated by DMG MORI are approximate dates only, and are estimated in good faith to the best of DMG MORI’s ability, commensurate with foreseeable scheduling and subject to availability of product and transit. DMG MORI shall not be liable for any loss or damage whatsoever, including loss of income and/or profits, incidental, special or consequential damages resulting from DMG MORI’s delayed shipment of the Goods for any reason whatsoever. Any claims for shortages or claims that the Goods shipped is other than that which was ordered or claims for damages prior to delivery to Buyer or Buyer's agent must be made in writ ing to DMG MORI within fif teen (15) days after the arrival of the Goods at Buyer's plant or place of business.

SHIPPING TERMS. Unless otherwise mutually agreed by the parties, delivery shall be made CIP Customer Location, Incoterms 2010. Customer Loc ation is the address indicated as such in the Order.

FOUNDATION SPECIFICATION. Buyer is responsible for preparing its facility for machine installation based on the machine’s foundation specifications.

ACCEPTANCE CRITERIA. Unless otherwise agreed by the parties in a signed writ ing by authorized representatives of each party, the applicable DMG MORI Installation Protocol shall form the sole basis of acceptance requirements for any machine purchased by Buyer. Notwithstanding anything to the contrary herein, a machine shall be deemed accepted on the earlier of sixty (60) days after

Shipment or such date that the machine is first used by Buyer for commercial production. Upon completion of agreed acceptance criteria, installation or deemed acceptance, whichever is applicable, Buyer agrees to complete all necessary paperwork to acknowledge acceptance of the machine. Buyer's failure to complete such paperwork shall have no effect on the acceptance of the machine.

TITLE AND RISK OF LOSS. Title and r isk of loss shall pass from DMG MORI to Buyer at Shipment and from thereon, the carrier shall be deemed to be acting for and on behalf of Buyer. The terms of payment of the Goods will not be affected by damage to or destruction of the Goods while in transit. Until such time that t itle to the Goods is transferred to Buyer, DMG MORI hereby grants Buyer a security interest in the Goods proportionate to any payment made related to the Goods. At such time that Goods are delivered to Buyer, Buyer hereby grants a purchase money security interest in the

Goods to DMG MORI, proportionate to any remaining balance owed. Each Party shall execute any such statements or other documentation necessary to perfect the other Party’s security interest in such Goods.

CANCELLATIONS. Orders with Goods that have already been shipped from the factory cannot be cancelled by Buyer and Buyer shall be liable for the full Order price. “Special Orders”, which are orders for items customized for the Buyer cannot be cancelled. Orders other than Special Orders that have not been shipped may be canceled in writing by Buyer to DMG MORI but shall be subject to a cancellation charge as set forth below. Buyer and DMG MORI acknowledge and agree that the DMG MORI’s harm caused by Buyers cancellation would be impossible or very difficult to accurately estimate at the date of the Order, and that the cancellation charges set forth below are reasonable estimates of the damages which DMG MORI will incur as a result of the cancellation. Orders that are cancelled within one week of the date of the Order are subject to a cancellation fee equal to 10% of the total Order price. Orders cancelled more than one week after the date of the Order and more than 90 days before the planned shipment date are subject to a cancellation fee of 20%of the Order price. Orders cancelled from 90 to 61 days before the planned shipment date are subject to a cancellation fee of 30% of the Order price. Orders cancelled from 60 to 31 days before the planned shipment date are subject to a cancellation fee of 40% of the Order price. Orders cancelled 30 days or less before the planned shipment date are subject to a cancellation fee of up to 50% of the Order price.

DMG MORI REMEDIES FOR NON-PAYMENT. DMG MORI reserves all rights including rights of replevin and damages for goods remaining unpaid, in whole or in part, more than sixty (60) days after payment is due.

BUYER REMEDIES. DMG MORI may, at its sole discretion, resolve any Buyer claim relating to the Goods by repossessing such goods and reimburs ing Buyer the purchase price for the Goods less depreciation arising from Buyer’s use of the Goods.

LIMITATION OF WARRANTY. EXCEPT AS SET FORTH IN THE DMG MORI LIMITED WARRANTY (A COPY OF WHICH IS ATTACHED TO THE SALES ORDER OR MAY BE REVIEWED ON THE

DMG MORI USA WEBSITE), DMG MORI MAKES NO OTHER REPRESENTATIONS OR WARRANTIES WHATSOEVER WITH RESPECT TO THE GOODS, INCLUDING BUT NOT LIMITED TO (a)

ANY WARRANTY OF MERCHANTABILITY; OR (b) ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE; WHETHER DIRECT OR INDIRECT, EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE OR USAGE OF TRADE. DMG MORI MAKES NO WARRANTY AS TO THE QUALITY, FINISH, ACCURACY OR TOLERANCE, COMPLIANCE WITH ELECTRICAL, HYDRAULIC, PNEUMATIC OR OTHER SAFETY CODES REQUIRED BY ANY GOVERNMENTAL OR QUASI-GOVERNMENTAL BODY, OR AS TO THE

EFFICIENCY, PRODUCTIVITY OR PERFORMANCE OF ANY GOOD.

LIMITATION OF LIABILITY. BUYER EXPRESSLY AGREES THAT IN NO EVENT SHALL DMG MORI BE LIABLE UNDER ANY THEORY OF RECOVERY, WHETHER BASED IN CONTRACT, IN

TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY), UNDER WARRANTY, OR OTHERWISE, FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL LOSS OR DAMAGE WHATSOEVER, ANY LOSS OF PROFITS, LOSS OF GOODWILL, LOSS OF OPPORTUNITY, LOSS OF BUSINESS, LOSS OF REPUTATION AS A RESULT OF ANY CLAIM BROUGHT BY BUYER

OR A THIRD PARTY ARISING OUT OF OR RELATING TO: (i) ANY BREACH BY DMG MORI OF THESE TERMS; (ii) ANY REPRESENTATION, STATEMENT OR TORTIOUS ACT OR OMISSION (INCLUDING NEGLIGENCE) OF DMG MORI; AND (iii) ANY USE OF THE GOODS OR THE FAILURE OF THE GOODS TO OPERATE PROPERLY; EVEN IF SUCH LOSSES WAS IN

CONTEMPLATION OF THE PARTIES OR WAS WHOLLY FORESEEABLE.

BUYER SHALL INDEMNIFY, DEFEND AND HOLD DMG MORI HARMLESS FROM AND AGAINST ALL CLAIMS, ACTIONS, DAMAGES, LIABILITIES, COSTS AND EXPENSES (INCLUDING BUT

NOT LIMITED TO ATTORNEY’S FEES) INVOLVING A THIRD PARTY CLAIM ARISING OUT OF BUYER’S USE OF THE GOODS EXCEPT TO THE EXTENT CAUSED BY DMG MORI’S

NEGLIGENCE OR WRONGFUL ACTS.

BUYER EXPRESSLY AGREES THAT IN NO EVENT SHALL THE AGGREGATE LIABILITY OF DMG MORI UNDER ANY THEORY OF RECOVERY EXCEED THE PUR CHASE PRICE OF THE

GOODS FROM WHICH LIABILITY AROSE. THE FOREGOING LIMITATIONS SHALL APPLY EVEN IF THE BUYER’S REMEDIES UNDER THESE TERMS FAIL OF THEIR ESSENTIAL PURPOSE.

WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, BUYER ASSUMES ALL RISK AND LIABILITY FOR THE RESULTS OBTAINED BY THE USE OF ANY GOODS IN THE PRACTICE

OF ANY PROCESS, WHETHER IN TERMS OF OPERATING COSTS, GENERAL EFFECTIVENESS, SUCCESS OR FAILURE, AND REGARDLESS OF ANY ORAL OR WRITTEN STATEMENTS MADE BY DMG MORI, BY WAY OF TECHNICAL ADVICE OR OTHERWISE, RELATED TO THE USE OF THE GOODS.

CONFIDENTIALITY. All drawings, designs, specifications, manuals, programs and prices furnished to Buyer by DMG MORI shall remain the confidential and proprietary property of DMG MORI. All such information, except as may be found in the public domain, shall be held in strict confidence by Buyer and shall not be disclosed by Buyer to any third parties. Copyright in all material made available by DMG MORI shall remain in DMG MORI at all t imes.

12/01/2024 - 12/31/4000

05/08/2026 | 17 / 19

SAFETY PRECAUTIONS. Buyer shall require employees to use all safety devices, guards and proper safe operating procedures as set forth in manuals and instruction sheets furnished by DMG

MORI. Buyer shall not remove or modify any such device, guard or sign. It is Buyer's responsibility to provide all the means that may be necessary to effectively protect all employees from serious bodily injury which otherwise may result from the method of particular use, operation, set-up or service of the Goods. If Buyer fails to comply with provisions of this paragraph or the applicable standards or regulations aforementioned, Buyer shall indemnify, defend and hold DMG MORI harmless from and against any and al l claims, losses or damages arising from such failure. It is the responsibility of Buyer to comply with all local laws, regulations and codes.

INFRINGEMENT. Buyer shall indemnify, defend and hold DMG MORI harmless from any infringement of any patent, trademark or copyright arising from Buyer’s use of the Goods, including but not limited to the reimbursement of costs and expenses, including attorney’s fees, incurred by DMG MORI with respect to a claim of infringement.

TIME STUDY & DESCRIPTIONS OF GOODS. All time study figures provided by DMG MORI are estimates only and are based on DMG MORI’s understanding of the accuracy and finish required, machinability of the material, amount of material to be removed and Buyer's operating condit ions. DMG MORI makes no warranty based upon or relating to time study figures. All weights and measurements given are estimates, stated as correctly as possible and any minor deviations shall not constitute non-conformity of the goods. Brochures, photographs and other illustrations representing the Goods are for illustration only and are not binding in detail. Brochures and product designs and specifications are subject to change without notice.

EXPORT CONTROL. The parties acknowledge that information subject to U.S. export control laws and regulations may be disclosed pursuant to this Agreement. Each party shall comply with all applicable export and import laws and regulations, including but not limited to, the International Traffic in Arms Regulations, as amended (22 C.F.R. Parts 120 - 130) (“ITAR”), the Export Administration Regulations, as amended (15 C.F.R. Parts 730 - 774) (“EAR”) and Office of Foreign Assets Control (“OFAC”) regulations. The parties shall not export, disclose, transfer, furnish or otherwise provide any article, technical data, technology, defense service, or technical assistance of the other party to any foreign country or foreign person as defined by applicable export control laws and regulations, including those working for a party, whether in the United States or abroad, without obtaining in advance proper United States government export authorization.

Buyer shall comply with applicable laws and regulations governing the exportation or re-exportation of the Goods. The Goods may be subject to export restrictions imposed by the United States, Japan, Germany and other countries and Buyer will not export or permit the export of the Goods anywhere without proper government authorization. Buyer further agrees that when requested by DMG MORI, it shall provide all necessary information, including but not limited to the end-user and end use of the Goods, to facilitate compliance with applicable export control laws. Buyer also agrees that it will notify DMG MORI immediately in writ ing if Buyer or any of its related entities, or any of Buyer’s customers for which a Good purchased from DMG MORI was used in any way to fulfill an order for such

Buyer customer, is added to the Entity List in Part 744 in the EAR (“Entity List”). Buyer acknowledges that should Buyer be added to the Entity List, DMG MORI shall have the r ight to immediately cease any pending deliveries or if available, apply for any applicable export license, in which case delivery can only resume if export license is granted. DMG MORI shall have no liability (including for lost profits or business interruption or under the limited service warranty) for any delivery interruption as a result of any changes in export control laws and regulations. To prevent the illegal diversion of a machine to individuals or nations that threaten international security, it may include a “Relocation Machine Security Function” that automatically disables the machine if moved following installation. If a machine is so-disabled, it can only be re-enabled by contacting DMG MORI. DMG MORI may refuse to re-enable the machine if it determines that doing so would be an unauthorized export of technology or otherwise violates applicable export restrictions. DMG MORI shall have no obligation to re-enable such machines and shall have no liability (including for lost profits or business interruption or under the limited service warranty) as a result thereof.

ASSIGNMENT. Buyer may not assign any of its rights or delegate any of its obligations under these Terms without the prior written consent of DMG MORI. Any purported assignment of rights or delegation in violation of this paragraph is null and void. No assignment or delegation relieves the Buyer of any of its obligations under these Terms.

FORCE MAJEURE. DMG MORI shall not be responsible for nonperformance or late performance of any part of the Order due to orders, regulations, and/or ordinances by government, act of God, war, blockade, insurrection, mobilization or due to any other causes or circumstances beyond DMG MORI’s control. If an event of force majeure occurs, DMG MORI at its option may either extend the time of performing affected obligations during the period the event of force majeure continues, or cancel the order.

GOVERNING LAW & ARBITRATION. These Terms shall be construed in accordance with the laws of the State of Illinois. The provisions of these Terms are divisible and the invalidity or unenforceability of any provision or provisions contained herein shall not in any way affect the validity of these Terms without the invalid or unenforceable provision or provisions. All disputes that may arise in connection with these Terms shall, unless settled by the parties, be submitted to arbitration in Chicago, I llinois in accordance with the Commercial Arbitration Rules of the American Arbitration Association. Any action to by Buyer relating to the Goods shall be commenced no later than one year from the date of alleged breach.

MERGER CLAUSE. The entire agreement is embodied in this writing. There are no understandings, agreements, representations, or warranties, either oral or written, relative to products or services, including statements made in or conduct implied from past dealings that are not fully expressed herein. No statement subsequent to the acceptance by DMG MORI of the purchase order purporting to modify the said terms and condit ions shall be binding unless consented to in writing by a duly authorized representative of DMG MORI in a document making specific reference to this transaction.

12/01/2024 - 12/31/4000

05/08/2026 | 18 / 19

DMG MORI LIMITED WARRANTY

GENERAL TERMS

Any good or service listed in the table below (each, a “Product”) sold by DMG MORI USA, Inc. or its affiliates is warranted by DMG MORI to be free from defects in material and workmanship in accordance with the following terms and limitations (“Warranty”). This Warranty only applies to a Product delivered in the United States. Warranty term for a Machine commences on the earliest of (i) date of installation (ii) date of acceptance (iii) 60 days after delivery or (iv) date when Machine is first used for commercial production. Warranty terms for all other goods commence on the date of shipment. term for Standalone Service commences on the date of service.

DMG MORI’s obligation under this Warranty shall be to repair or replace, at its option, the defective Product. If DMG MORI is unable to repair or replace the Product within six (6) months from the date DMG MORI is notified of the defect, DMG MORI may satisfy its obligation under this Warranty by repossessing the Product and refunding the purchase price of the Product. A Warranty claim must be made within the applicable Warranty term. This Warranty is not transferable without the prior written consent of DMG MORI. Buyer shall pay for any goods and services provided by DMG MORI that is not within the scope of this Warranty.

Any legal action in connection with this Warranty must be commenced no later than one (1) year after the expiration of the applicable Warranty term or one (1) year after DMG MORI or its affiliates cease efforts to repair the Product, whichever comes later.

HOW TO MAKE A WARRANTY CLAIM

All Products except Spare Parts: (1) Submit request through the DMG MORI call center or through the customer portal myDMGMORI

(https://us.mydmgmori.com); (2) Upon DMG MORI’s request, provide photographs or make the Product available for inspection within a reasonable time; and (3) Preserve the Product until otherwise instructed by DMG MORI.

Spare Parts: (1) Order replacement for the defective Spare Part; and (2) Return defective Spare Part to DMG MORI within two (2) weeks of

Replacement Part shipment. If DMG MORI inspection shows the returned Spare Part to be defective, a credit will be issued against the purchase order for the Replacement Part.

EXCLUSIONS

This Warranty does not cover the following:

▪ Depreciation or damage caused by: (1) Any service (including installation), modification or alteration not performed by DMG MORI or a party authorized by DMG MORI; (2) Lack of or improper care or maintenance; (3) Abuse or misuse; (4) Accident caused by a party other than DMG MORI; (5) Use of unauthorized parts or peripherals; (6) Modification or alteration not approved by DMG MORI;

(7) Normal wear and tear; (8) Negligence of shipper or rigger; (9) Disablement arising from unauthorized movement of Product after installation; (10) improper or unsecured storage or (11) Any other cause beyond the control of DMG MORI.

▪ Paint, batteries, fuses, filters, lubrication metering units, fluids, lights or any other replaceable item.

EXCEPT AS SET FORTH HEREIN, DMG MORI MAKES NO REPRESENTATIONS OR WARRANTIES WHATSOEVER WITH RESPECT TO THE EQUIPMENT, INCLUDING BUT NOT LIMITED TO (a) ANY WARRANTY OF MERCHANTABILITY; OR (b) ANY WARRANTY

OF FITNESS FOR A PARTICULAR PURPOSE; WHETHER DIRECT OR INDIRECT, EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE OR USAGE OF TRADE. DMG MORI MAKES NO WARRANTY AS TO THE QUALITY, FINISH, ACCURACY OR TOLERANCE, COMPLIANCE WITH ELECTRICAL, HYDRAULIC, PNEUMATIC OR OTHER SAFETY CODES

REQUIRED BY ANY GOVERNMENTAL OR QUASI-GOVERNMENTAL BODY, OR AS TO THE EFFICIENCY, PRODUCTIVITY OR

PERFORMANCE OF ANY EQUIPMENT.

IN NO EVENT SHALL (a) DMG MORI BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL LOSS OR DAMAGE WHATSOEVER, ANY LOSS OF PROFITS, LOSS OF GOODWILL, LOSS OF OPPORTUNITY, LOSS OF BUSINESS OR LOSS

OF REPUTATION ARISING OUT OF OR RELATING TO THE PURCHASE OF EQUIPMENT, THIS WARRANTY OR USE OR INABILITY TO USE THE EQUIPMENT AND (b) THE AGGREGATE LIABILITY OF DMG MORI UNDER ANY THEORY OF RECOVERY EXCEED THE PURCHASE PRICE OF THE EQUIPMENT FROM WHICH LIABILITY AROSE, TO THE EXTENT SUCH LIMITATIONS ARE

PERMITTED BY APPLICABLE LAW.

Warranty Term

DMG MORI machines 24 months

New MASTER spindles equipped on new machines or ordered as spare parts 36 months

New spindles ordered as spare parts (excl. MASTER spindles) 24 months

Renewed X-series Davis spindles (Rebuilt spindles which have been inspected and tested by DMG MORI’s factory in Davis, California to work like new)

18 months

Other renewed spindles (Rebuilt spindles which have been inspected and tested by DMG MORI to work like new, incl. renewed

MASTER spindles)

12 months

DMQP products (Non-DMG MORI manufactured peripherals provided by approved partners) 24 months

Factory automation 24 months

DMG MORI USA local automation 12 months

New DMG MORI spare parts (excl. spindles) 12 months

Renewed DMG MORI spare parts (Rebuilt spare parts which have been inspected and tested by DMG MORI to work like new, excl.

renewed spindles)

6 months

Linear motors 60 months

All other products (incl. non-DMG MORI machines) As provided by Original

Equipment Manufacturer

Standalone service 30 days

12/01/2024 - 12/31/4000

05/08/2026 | 19 / 19