580-22-100 CUTSHEETS REPAIR REPLACE MAIN CHILLED WATER DISTRO SYSTEM.pdf

By-Pass & Filter Feeders

PRODUCT BROCHURE

Where Innovation Flows

(Bag frame dis play ed in front of bag for clarity only.)

VTF-2HP WITH

FILTER BAG KIT INSTALLED

MODEL FILTER

APPROX.

CAPACITY

GAL. (L)

MAX.

PRESSURE

PSI (BAR)*

DIMENSIONS INCHES (MM) SHIP

WEIGHT

LB. (KG) A B C D E F

DBF-2HP Optional† 2 (7.6)

(20.7)

31-1/4 (793.8)

(152.4)

12-3/4 (323.9)

8-5/8 (219.1)

4-1/8 (104.8)

13-1/4 (336.6)

(10)

DBFC-2 Cartridge 2 (7.6)

(20.7)

31-1/4 (793.8)

(152.4)

12-3/4 (323.9)

8-5/8 (219.1)

4-1/8 (104.8)

13-1/4 (336.6)

(10)

DBF-5HP Optional† 5 (18.9)

(20.7)

29-3/4 (1,009.7)

(254.0)

10-1/2 (266.7)

(203.2)

6-1/8 (155.6)

(330.2)

(17)

DBFC-5 Cartridge 5 (18.9)

(20.7)

29-3/4 (1,009.7)

(254.0)

10-1/2 (266.7)

(203.2)

6-1/8 (155.6)

(330.2)

(17)

DBF-10HP Optional† 10 (37.9)

(20.7)

45-3/4 (1,162.1)

(254.0)

26-1/2 (673.1)

(203.2)

6-1/8 (155.6)

(330.2)

(28)

*At 200°F (93°C) max. †Filter support not included with base unit. Purchase optional filter bag kit.

MODEL FOR USE ON

FBK-2 VTF-2HP, DBF-2HP

FBK-5 VTF-5HP, DBF-5HP

FBK-10 VTF-10HP, DBF-10HP

By-Pass Feeders Neptune By-Pass Feeders are a convenient method of introducing treatment chemi-cals into closed circulating water systems.

Neptune By-Pass Feeders are ideal for treating hot and chilled water circulating loops used in heating and air conditioning systems, process heating and cooling, or large engine water jackets.

Neptune offers two styles of By-Pass Feeders: A vertical style with dish bottom in and a vertical style with dish bottom out.

Filters are available for system cleanup and monitoring.

A high-pressure cap rated to 300 psi (20.7 bar) is now standard.

Filter Feeders The Neptune Filter Feeders combine chemical addition and high-capacity filtering in one piece of equipment. They are a convenient way to introduce solid or liquid chemicals into hot or cold water closed circulating systems.

• Eliminate need for separate By-Pass Feeder and filter

• Filtration can be achieved at the same time as chemical addition

• Extended neck with top inlet allows simple installation of filter bag and basket

• Filter bags are available in 50, 20, 5 and 1 micron ratings (order separately)

• Filter bags are quickly and easily replaced

Caps All Neptune By-Pass Feeders offer a convenient, quick-opening, high-pressure closure. These closures offer better sealing with less force and eliminate the need for tools. Design binds cap tightly when under pressure making it necessary to bleed pressure from tank before removing cap.

Underside of cap that contacts liquid is epoxy-coated.

Vertical Style – Dish Bottom Out The DBF series features wide-mouth caps manufactured by Neptune. These caps utilize a square-section O-ring seal and will close easily by hand. Advantages of this series are demountable leg extensions and a full bottom drain. Optional Filter Bag Kit may be added.

DBFC models include a built-in support and mounting for a cartridge filter (order cartridge separately).

See page 3 for filter specifications.

Filter Bag Kits Available for all VTF and DBF models up to 10 gallons (39.7 L).

Kit includes bag, bag frame, tubing and connectors. The addi-tion of a filter bag allows the By-Pass Feeder to function simulta-neously as a side stream filter. (A clean bag is rated at approxi-mately 30 microns.) Cannot be used with DBFC models.

VERTICAL STYLE -

DISH BOTTOM IN

OLD STYLE

CAPS

VERTICAL STYLE -

DISH BOTTOM OUT

Three-lug, 1⁄3-turn design rated to

200 psi (13.8 bar).

NEPTUNE HIGH PRES-

SURE CAP

FILTER FEEDER

Coarse-thread, 2-1⁄2-turn design rated to

300 psi (20.7 bar).

Convenient features include Full Bottom Drain and Anchor Bolt Holes

E

30°

5/16" (8 mm) MTG. HOLES

F

D

A

B

3-1/2" (88.9 mm)

C

3/4" FEMALE FITTING NPT

4" (101 mm)

FILL CAP

N E P T U N E ™ | P A R T O F P S G ® 3

STANDARD MODELS

MODEL FILTER

APPROX.

CAPACITY

GAL. (L)

MAX.

PRESSURE

PSI (BAR)*

DIMENSIONS INCHES (MM) SHIP

WEIGHT

LB. (KG) A B C

VTF-2HP Optional† 2 (7.6)

(20.7)

21-1/4 (539.6)

(152.4)

12-3/4 (323.9)

(10)

VTF-5HP Optional† 5 (18.9)

(20.7)

19-3/4 (501.7)

(254)

10-1/2 (266.7)

(17)

VTF-10HP Optional† 10 (37.9)

(20.7)

35-3/4 (908.1)

(254)

26-1/2 (673.1)

(27)

VTF-12HP N/A 12

(45.4)

(20.7)

(1,066.8)

(254)

32-3/4 (831.9)

(31)

*At 200°F (93°C) max. †Filter support not included with base unit. Purchase optional filter bag kit.

FOUR FITTING MODELS

MODEL

APPROX.

CAPACITY

GAL. (L)

MAX.

PRESSURE

PSI (BAR)*

DIMENSIONS INCHES (MM) SHIP

WEIGHT

LB. (KG) A B C

VTF-2X4HP† 2

(7.6)

(20.7)

21-1/4 (539.6)

(152.4)

12-3/4 (323.9)

(10)

VTF-5X4HP† 5

(18.9)

(20.7)

19-3/4 (501.7)

(254.0)

10-1/2 (266.7)

(21)

*At 200°F (93°C) Max. †Filter support not included with base unit. Purchase optional filter bag kit.

FEEDER BODIES

MODEL

APPROX.

CAPACITY

GAL. (L)

MAX.

PRESSURE

PSI (BAR)*

DIMENSIONS INCHES (MM) SHIP

WEIGHT

LB. (KG) A B C

VTF-2-1 2

(7.6)

(20.7)

(508)

(152.4)

12-3/4 (323.9)

(10)

VTF-5-1 5

(18.9)

(20.7)

(457.2)

(254.0)

12-3/4 (323.9

(21)

*At 200°F (93°C) Max.

PART NO. DESCRIPTION

107290 5-MICRON PLEATED FILTER

107287 20-MICRON PLEATED FILTER

DBFC-5 WITH

CARTRIDGE FILTER INSTALLED

FILTER

ASSEMBLY

Vertical Style – Dish Bottom In The VTF series is the most popular and economical by-pass feeder available from Neptune. The series uses the same wide mouth, easy-close caps described in the “Dish Bottom Out” style. Optional Filter Bag Kit may be added.

Cartridge Filter Units DBFC models include a built-in support and mounting for a cartridge filter. Order cartridge separately.

Cartridge filter modification cannot be installed in DBF models.

DBFC model must be ordered for use with cartridge filter.

SPECIFICATIONS - ALL MODELS

• Working pressure: up to 300 psi (20.7 bar) maximum at 200°F (20°C)

• Tank shell:

2-gal. (7.6 L) unit – 11-gauge steel 5-gal. (18.9 L) unit – 10-gauge steel

10-gal. (37.9 L) unit – 10-gauge steel 12-gal. (45.4 L) unit – 10-gauge steel

• Tank heads:

2-gal. (7.6 L) unit – 11-gauge steel

5-gal. (18.9 L) unit – 9-gauge steel 10-gal. (37.9 L) unit – 9-gauge steel 12-gal. (45.4 L) unit – 9-gauge steel

• Cap: Wide-mouth cast iron with Buna-N O-ring, easy open/easy close

3/4"

FNPT OUTLET

3/4" (19 mm)

FNPT INLET

3-1/2" (88.9 mm)

A

B

C

3-1/2" (88.9 mm) OPENING

A C

B 3/4"

FNPT INLET

3/4"

FNPT OUTLET

4" (101 mm)

FILL CAP

3/4"

FNPT OUTLET

3/4"

FNPT INLET

1" NPT

A

B

C

Distributed By:

Neptune reserves the right to modify the information and illustrations contained in this document without prior notice. This is a not-contractual document.

© 2019 PSG®, a Dover company NPT-10200-C-01

Where Innovation Flows

PSG

22069 Van Buren Street

Grand Terrace, CA 92313-5651 USA P: +1 (909) 422-1700 • F: +1 (909) 783-3440 psgdover.com/neptune

Filter Feeders

• Stainless steel dissolving basket holds and fully supports the filter bag inside (order bag separately)

• Ring-top bags feature handles for easy removal

• “DB” type feeders have a full bottom drain and bolt-on legs with anchor bolt holes

• Model FTF-5150HP features oversize 1-1/2" (38 mm) inlet and outlet connections. Can be used for system cleanup with high-volume pumps where high flow rates are desired for fast clean-up or flush-out prior to start-up

See page 3 for filter specifications.

FEATURES AND BENEFITS

PART NO. TYPE QUANTITY DESCRIPTION

107026 ULTRA FINE PKG. OF 1 1-MICRON RING-TOP BAG

106453 FINE PKG. OF 1 5-MICRON RING-TOP BAG

107289 MEDIUM PKG. OF 1 20-MICRON RING-TOP BAG

107231 COARSE PKG. OF 1 50-MICRON RING-TOP BAG

All bags fit any “FTF” model.

FILTER BAGS

MODEL

APPROX.

CAPACITY

GAL. (L)

MAX.

PRESSURE

PSI (BAR)*

DIAM.

IN. (MM)

CONN.

SIZE

FNPT

DIMENSIONS INCHES (MM)

A B C D

FTF-2HP 2-1/2

(9.5)

(20.7)

(152.4)

3/4

(19) N/A

FTF-2DB 2

(7.6)

(20.7)

(152.4)

3/4

(19) N/A 4-3/4

(120.7) 8-1/2

(215.9)

FTF-5HP 7-1/2

(28.4)

(20.7)

(254.0)

3/4

(19) N/A

FTF-5DB 5

(18.9)

(20.7)

(254.0)

3/4

(19) N/A 5-1/4

(133.4) 12-1/2 (317.5)

FTF-5150HP 7-1/2

(28.4)

(20.7)

(254.0)

1-1/2

(38) N/A

FTF-5150DB 5

(18.9)

(20.7)

(254.0)

1-1/2

(38) N/A 5-3/8

(135.8) 6-1/4

(156.6)

*At 200°F (93°C) max.

BF-19

5/16" (7.9 mm)

DIA. MOUNTING

HOLES

30°

DMODEL

FTF-5HP

MODEL

FTF-2DB

3-1/2" (88.9 mm)

FNPT

INLET

FNPT

OUTLET

4" (101 mm)

FILL CAP

2-7/8" (73.0 mm)

25-1/4" (641.4 mm)

31-3/4" (806.5 mm)

REF

All Models (except “DB” Type)

DISSOLVING

CYLINDER

FILTER

BAG

C

3-1/2" (88.9 mm)

4" (101 mm)

FILL CAPFNPT

INLET

FNPT

OUTLET

All “DB” Models

31-3/4" (806.5 mm)

REF

28-1/4" (717.6 mm)

800-257-3872 159 Swanson Rd., Boxborough, MA 01719/Telephone: 978-263-1400/Fax: 978-264-0292

Patent Pending

Multi-Sense™ - Model 231 Wet-to-Wet, Differential Pressure Transducer

Applications

● Energy Management Systems

● Process Control Systems

● Flow Measurement of

Various Gases or Liquids

● Liquid Level Measurement of

Pressurized Vessels

● Pressure Drop Across Filters

Features

■ Field Selectable Output

■ True 4 to 20 mA Output

■ 0-5, 1-5, and 0-10 VDC Output

■ Field Selectable Pressure

Ranges

■ Field Accessible Push-

Button Zero and Remote Zero

■ Dual Sensors

■ Hinged Cover

■ Field Selectable Port Swap

■ Optional LCD Display

■ All Cast Aluminum, NEMA 4

Rated Housing

■ Meets CECECECECE Conformance

Standards

■ RoHS Compliant

Benefits

■ Hinged Cover for Easy

Access to Switch Selectable Features

■ Dual Pressure Sensors Provide Independent High and Lo Pressures

■ LCD Display for In-Situ Viewing of Hi, Lo, and Differential Pressure

■ Field Calibration Saves Time and Money

■ Port Swap Feature Eliminates Replumbing Existing Installations

■ Reduces Inventory

■ Saves Installation Cost

NOTE: Setra quality standards are based on ANSI-Z540-1.

The calibration of this product is NIST traceable.

Visit Setra Online:

http://www.setra.com

Setra’s Model 231 Multi-Sense™ Wet-to- Wet differential pressure transducer all-inclusive design provides users with field accessible ranging, choice of output and field zeroing.

Choose from three configurable Model 231 pressure transducers: 5 up to 50 psid, 10 up to 100 psid, or 25 up to 250 psid. Each Model 231 has 4 unidirectional and 4 bidirectional switch selectable pressure ranges and can be reconfigured in the field for 0-5 VDC, 1-5 VDC, 0-10 VDC, or 4 to 20 mA output. (The 4 to 20 mA output is operable as a true 2-wire device.) The Model 231 jumper selectable port swap fea-ture eliminates costly replumbing if the pressure transducer is improperly installed or replaced. An optional LCD display is available for on-site indication of line and differential pressure.

The Model 231 is designed with Setra’s own dual pressure sensors, which incorporate thin film sensing technology. This technology offers exceptional thermal accuracy and signal linearity. Utilizing this technology, the Model 231 is resistant to long-term drift caused by dopant migration and Fermi-level effects, in-trinsic in piezoresistive and silicon based technologies, which are exaggerated at elevated temperatures and by extended pres-sure cycling.

ISO

✓Certified

9001:

3-VALVE MANIFOLD

The Model 231 can be supplied with an option-al 3-Valve Manifold assembly for ease of installation and maintenance. The 3-Valve Manifold is a machined brass body requiring no internal pipe connections, thereby eliminating the risk of internal leaks. The manifold’s rugged, yet compact, construction requires minimum space for installation and use. If the Model 231 is ordered with the 3-Valve Manifold, the system is shipped completely assembled and ready for wall or pipe mounting. (Order as Pres-sure Fitting Code 3V.)

“All-in-One” 8 Selectable Ranges...One Transducer

Pressure Connection 2F =1/8-18 NPT Female (Standard) Optional 3V =3-V Manifold assembled w/Model 231

Performance Data Accuracy RSS* (at constant temp.)

Pressure Ranges A, B, C ±1.0% FS Pressure Range D ±2.0% FS

Thermal Effects**

Compensated Range °F (°C) +32 to +130 (0 to +54) Zero Shift %FS/100°F (50°C) 2.0 (1.8) Span Shift %FS/100°F(50°C) 2.0 (1.8)

Warm-up Shift <0.12% FS Response Time 1 to 5 sec. (selectable) Maximum Working Pressure Maximum Range of

Pressure Ordered Proof Pressure 2.2 x Full Scale Burst Pressure 40 x Full Scale *RSS of Non-Linearity, Non-Repeatability and Hysteresis.

**Units calibrated at nominal 70°F. Maximum thermal error computed from this datum.

Pressure Media Liquids or Gases Compatible with 17-4 PH Stainless Steel Note: Hydrogen not recommended for use with 17-4 H stainless steel.

Environmental Data Temperature Operating* °F (°C) -4 to +185(-20 to +85) Storage °F (°C) -4 to +185(-20 to +85) Vibration 10g from 50 Hz to 2000 Hz Shock 200g *Operating temperature limits of the electronics only.

Pressure media temperatures may be considerably higher or lower.

Physical Description (Model 231) Case Die Cast Aluminum, Powder Coated Pressure Fittings 1/8-18 NPT Internal Electrical Connection 1/2 in. Conduit Size 4.0 x 6 x 2 in.

(102 x 152 x 51mm) Weight 1.5 lb Sensor Cavity Volume 0.2 cc

Electrical Data (Voltage) Circuit 3-Wire Excitation 12 to 30 VDC/18 to 28 VAC

(Reverse Excitation Protected) Output* 0 to 5 VDC

0 to 10 VDC 1 to 5 VDC

Output Impedance 30 Ohms Current Consumption 4 mA (typ.) at 5 VDC

5 mA (typ.) at 10 VDC 40 mA (typ.) at 18-28 VAC

*Calibrated into a 50K Ohm load, operable into a 5000 ohm load or greater.

Model 231 Specifications Electrical Data (Current) Circuit 2-Wire

(Reverse Excitation Protected) Output* 4 to 20 mA, Clipped and

Capped External Load 0 to 1000 Ohms Minimum supply voltage (VDC) = 12 + 0.02 x (Resistance of receiver plus line).

Maximum supply voltage (VDC) = 30 + 0.004 x (Resistance of receiver plus line).

*Calibrated at factory with a 24 VDC loop supply voltage and a 250 ohm load.

3-Valve Manifold Assembly* Physical Description Manifold Block Brass Valves (3) V1 for Connection to +Port

V2 for Connection to –Port V3 for Equalizing Pressure

Valve Type 90° On/Off Process Connections 1/4-18 NPT Internal Thread Dimensions 6” x 11” (152mm x 279mm) Weight 3 lbs.

*Order assembled with the Model 231 (Code 3V) or order separately as

Option 231900-01.

Specifications subject to change without notice.

SS

P2

R ev . A

1/

/0

While we provide application assistance on all Setra products, both personally and through our literature, it is the customer’s responsibility to determine the suitability of the product in the application.

159 Swanson Road, Boxborough, MA 01719/Tel: 978-263-1400;

Toll Free: 800-257-3872; Fax: 978-264-0292; email: sales@setra.com

Model

231G = 231

Code all blocks in table.

ORDERING INFORMATION

Example: Part No. 231GMS12FD is a Model 231, 5 PSID up to 50 PSID, 1/8” NPT Female Fitting, and LCD Display

Please contact factory for versions not shown.

7 1 0 12 3 1 G

IN

MM

Outline Drawing

N = No Display D = LCD Display

OptionRanges Unidirectional & Bidirectional

MS1 = 5, 10, 25 50 psid ±5, ±10, ±25, ±50 psid

MS2 = 10, 20, 50, 100 psid ±10, ±20, ±50, ±100 psid

MS 3 = 25, 50, 125, 250 psid ±25, ±50, ±125, ±250 psid

A B C D

MS1 50 25 10 5

MS2 100 50 20 10

MS3 250 125 50 25

Pressure Ranges

1/8” NPTF

5.6

6.0

0.3

R 0.1

1.2

1.7

2.0

2.0

4.6

4.8

4.0

5.2

1.0

1.6

1/2” Conduit Opening

High Low

A A

B B

DRN. BY

SCALE:

DATE:

APRVD: SIZE

B SHT.1 OF 1

TOLERANCES

(EXCEPT AS NOTED)

DECIMAL

.XX ± .03

.XXX ± .010

FRACTIONAL

± 1/32

ANGULAR

± 1°NO REVISION DATE BY

107583

Outline, Installation, 600A/700A

Active Filter, Type 1, Floor Mount

MJS

yes

6/6/18A update est. weight to actual weight 4/8/19 MJS

B R&D CHANGES INCORPORATED 7/17/19 MJS

C Front cover updated, add'l slots 2/17/20 MJS

D #5376 heat loss update 8/28/20 MJS

E Added missing Height Dim 2/5/21 MJS

THE INFORMATION AND DESIGNS CONTAINED

IN THIS DRAWING ARE CONFIDENTIAL AND THE

PROPRIETARY PROPERTY OF ALLIED MOTION

TECHNOLOGIES INC. AND ITS SUBSIDIARIES.

NEITHER THIS DESIGN NOR ANY INFORMATION

CONTAINED IN THIS DRAWING MAY BE

REPRODUCED OR DISCLOSED TO OTHERS

WITHOUT THE EXPRESS WRITTEN CONSENT OF

ALLIED MOTION TECHNOLOGIES INC. AND ITS

SUBSIDIARIES.

© 2021 TCI, LLC

Notes:

1) Mounting hole Diameter is .64 inches.

2) The "A" mounting holes are mandatory the "B" mounting holes are optional.

3) To insure proper cooling maintain 6 inch clearance on sides and front

Weight lbs (Kg): 1268 (575Kg) Total Heat Loss:

600A: 16,100 W, 54,935 Btu/h 700A: 20,100 W, 68,584 Btu/h Drawings:

General Schematic M/M: 31021 General Schematic S/S: 31021-1 Customer Connection: 25027-3 Interface/Display Module: 28282-1 & 28283-1 Current Transformer: 26461

6.00

6.38

6.00

57.64

16.50

16.86 16.50

18.57 n.64

12 Plcs

20.93

Bottom Air Inlet both sides and front

Door Latch

Hinged Door

Hinged Door

Door Latch

MOUNTING

DIMENSIONS

Removable front cover

A

A

A

A

A

A

A

A

BBBB

WARNING:

Filter must be securely anchored to the floor to avoid a tipping hazard!

59.64 mtg flange

20.88 mtg flange

The 600A unit is rated for 450A when applied with a 480V/600V autotransformer.

The 700A unit is rated for 520A when applied with a 480V/600V autotransformer.

1.93 51.86

55.71

HMI Module

80.72 88.46

Internal

Prepared By:

Donald Foster Schneider Electric USA, Inc Executive, Sales Senior 7525 SE 24th St Mercer Island,WA 98040 don.foster@se.com M:+1 2067693694

Proposal Name: VA HOUSTON CHILLED WATER

Quote Name: VA HOUSTON SWBD REV1

Proposal Number: P-240411-4420262

Quote Number: Q-5160335

Through Addenda Number: 0

Sales Representative: Donald Foster

Conditions of Sale

This Quotation is subject to Coordinated Project Terms. See https://www.se.com/us/en/download/document/0100PL0043/

Quoted price in currencies other than U.S. Dollars is per the annual Schneider Electric exchange guidance.

Quote is valid for 30 days. Quoted lead times are approximate and subject to change.

Schneider Electric reserves the right to amend, withdraw or otherwise alter this submission without penalty or charge as a result of any event beyond its control arising from or due to the current Covid-19 epidemic or events subsequent to this epidemic / pandemic including changes in laws, regulations, by laws or direction from a competent authority.

https://www.se.com/us/en/download/document/0100PL0043/

Quote Date:

Seq # Qty Product Description 1 1 Designation :

Product Details:

1 - Square D Custom Swbd-QED-2 Switchboard

Square D Custom Swbd Designed and Tested in accordance with:

UL 891/NATIONAL ELECTRIC CODE/NEMA PB-2

System Voltage - 480Y/277V 3Ph 4W 60Hz Source Description - Main-Main System Ampacity - 2000A Bussing - Aluminum Plated w/Tin and Copper Plated w/Silver Neutral Bus - 100% Max Available Fault Current (RMS) - 65kA Enclosure - Type 1 Accessibility: Front Only Control Power Transfer Exterior Paint Color - ANSI 49 Lineup with MasterPact MTZ Breaker(s) Ground Lug provided for each device SIS Control Wire Aluminum Ground Bus Auto Throw-over System . Standard Main-Main . Transition Type - Open . Automatic Retransfer Switch . Preferred Source Selector . Touchscreen HMI Seismic Qualified

Dimensions 4 - 36" Wide Section(s) 1 - 24" Wide Section(s) 5 - 36" Deep Enclosure(s) Dimensions: 168.00" W X 36" Max D X 91.5" H Approximate Weight: 4279.00 lbs / 1940.95 kgs

Incoming Requirements Suitable for Use As Service Entrance - Incoming One Entry Point: Section 1, Through the Bottom Connection Type: Cable SPD with Surge Rating 120kA SPD Dry Contacts Includes Surge Counter Power Meter - PM5563RD 3 CTs PM5563 w/ Display - 3 phase 4 wire wye 2000A

Suitable for Use As Service Entrance - Incoming Two Entry Point: Section 4, Through the Bottom Connection Type: Cable Power Meter - PM5563RD 3 CTs PM5563 w/ Display - 3 phase 4 wire wye 2000A

Mains 1 - 2000AF/2000AT 100% 3 Pole Stored Energy, Fixed Mounted Circuit Breaker, UL: Type

MTZ 2

Device Associated to Incoming One 1 - 2000AF/2000AT 100% 3 Pole Stored Energy, Fixed Mounted Circuit Breaker, UL: Type

MTZ 2

Device Associated to Incoming Two

Quote Date:

Common Main Features:

Device Designation: MAIN Micrologic X 6.0, Long Time, Short Time, Instantaneous, Ground Fault DM - Energy Reduction Maintenance Setting

(ERMS)

Overcurrent Trip Switch 1A/1B Form C Contact (SDE) Auxiliary Switches 8A-8B Programmable Contact Module, ESM Shunt Trip - 120Vac Second Shunt Trip - 120Vac Contact Wear Indication - Visual Padlock Attachment Spring Charging Motor - 120Vac Energy Reduction Maintenance Switch Shunt Close without Communications - 120Vac

Feeders

Devices Associated to Main 1:

2 - 400AS/300AT 480V 80% Rated 100 kA 3 Pole UL, Group Mounted Electronic Trip Circuit Breaker: Type LL Device Designation: 300 ACCUSINE Standard Trip Unit, Long Time, Short Time, Instantaneous 5 - 400AS/400AT 480V 80% Rated 100 kA 3 Pole UL, Group Mounted Electronic Trip Circuit Breaker: Type LL Device Designation: VFD Standard Trip Unit, Long Time, Short Time, Instantaneous 3 - 400AT 480V 80% Rated 100 kA 3 Pole UL, Group Mounted Electronic Prepared Space: Type LL Device Designation: SPACE

A A

B B

C C

D D

THIRD

ANGLE

SQUARE D/SCHNEIDER ELECTRIC HAS PROPRIETARY RIGHTS TO THE INFORMATION

CONTAINED HEREON. THIS INFORMATION REMAINS THE PROPERTY OF SQUARE D/

SCHNEIDER ELECTRIC AND MAY BE REPRODUCED OR USED ONLY IN ACCORDANCE

WITH INSTRUCTIONS OR PERMISSION FROM SQUARE D/SCHNEIDER ELECTRIC. THIS

DOCUMENT SHALL BE RETURNED TO SQUARE D/SCHNEIDER ELECTRIC UPON REQUEST.

USER SHOULD VERIFY DRAWINGS ARE THE MOST RECENT VERSION PRIOR TO USE.

© 2009, SCHNEIDER ELECTRIC, ALL RIGHTS RESERVED.

NOT APPLICABLE

GENERAL TOLERANCE SPEC.

NORMAL CLASS TOLERANCE

DIMENSIONS ARE IN INCHES UNLESS OTHERWISE NOTED

* OR ? * DENOTES CRITICAL CHARACTERISTIC

DRW

DATE

CHK

ECO

SHEETSIZE DWG NO

SCALE--- NTS

1 OF 1 D aa217-028-99 Any printed copy of this document, internally used within Schneider Electric, is considered uncontrolled.

P R

IN

TS

T O

REVISION DESCRIPTIONREV. ECO DATE BY

MATERIAL

PART

FINISH

RAWSTOCK

MATERIAL

NOTES

RAWSTOCK

FINISH

Indoor End Tap Box - ETB Final Assembly Print

4-25-12 A251417

HY

Ampere Rating (Aluminum)

Housing Width

Busbar Width

Joint Center A B

Lugs per Phase/Neutral 1/0 - 600 kcmil

Ground Lugs #6 - 300 kcmil

Ground Lugs 1/0 - 600 kcmil

800 4.34 3.00 ----- 29.14 11.00 3 3 -----

1000 5.34 4.00 ----- 29.14 11.00 4 4 -----

1200 6.34 5.00 ----- 29.14 11.00 4 4 -----

1350 7.34 6.00 ----- 29.14 14.88 5 5 -----

1600 8.84 7.50 ----- 29.14 14.88 6 6 -----

2000 12.72 4.50 6.88 29.14 16.88 7 7 -----

2500 16.22 6.00 8.88 39.38 20.88 9 ----- 9

3000 18.72 7.50 9.88 39.38 23.76 10 ----- 10

4000 25.60 6.50 8.88 39.38 29.76 14 ----- 14

Ampere Rating (Copper)

Housing Width

Bus Bar Width

Joint Center A B

Lugs per Phase/Neutral 1/0 - 600 kcmil

Ground Lugs #6 - 300 kcmil

Ground Lugs 1/0 - 600 kcmil

800 3.84 2.50 ----- 29.14 11.00 3 3 -----

1000 4.34 3.00 ----- 29.14 11.00 4 4 -----

1200 5.34 4.00 ----- 29.14 11.00 4 4 -----

1350 5.84 4.50 ----- 29.14 14.88 5 5 -----

1600 6.74 5.40 ----- 29.14 14.88 6 6 -----

2000 7.84 6.50 ----- 29.14 14.88 7 7 -----

2500 12.72 4.50 6.88 39.38 20.88 9 ----- 9

3000 15.22 5.00 8.88 39.38 20.88 10 ----- 10

3200 16.22 6.00 8.88 39.38 20.88 11 ----- 11

4000 23.60 4.50 8.88 39.38 29.76 14 ----- 14

5000 25.10 6.00 9.88 39.38 29.76 17 ----- 17

NOTES:

1. DIELECTRIC TEST PER DS258-167-00.

2. INSULATE BUS BARS PER 45218-944-01 (MYLAR).

3. SHIP INSTRUCTION BULLETIN 45123-961-01 AND

NEMA PAMPHLET ASSY 45123-226-50 WITH THE DEVICES.

4. SHIP TIE CHANNEL ASSY WITH "BOLT" END DEVICE

SUFFIX "B" ONLY.

5. IF THIS DEVICE IS CRATED, AFFIX LABEL 45123-904-01

TO OUTSIDE OF CRATE.

6. CE LABEL 45123-946-01 MUST BE ADDED TO EXPORT

DEVICES ONLY. ONE ON PACKING LABEL, ONE ON

CRATING LABEL.

INDOOR ETB

(4 POLE TRIPLE RUN

SHOWN)

FLANGED END VIEW

NOTES: FLANGED END

SEE AA217-020-99 FOR DETAILS

LABELS & INSTRUCTIONS:

NAMEPLATE 45128-946-01

UL/CSA LABEL 45121-091-01

DANGER LABEL 45123-936-01

LUG INSTRUCTIONS 45123-910-01

SEISMIC QUALIFICATION LABEL 45124-110-01

GROUND LABLE 45123-970-01: ON GROUND TIE

DANGER LABEL 45123-908-01 (3): ONE ON EACH BOX END

DANGER LABEL 45123-911-01 (2): 4 POLE DEVICE ONLY

ONE NEXT TO NAMEPLATE, ANOTHER TO INSIDE END WALL

SIDE BRACE (2)

CENTER BRACE

(1) FOR DOUBLE RUN

(2) FOR TRIPLE RUN

GROUND TIE

GROUND LUG KIT

(SEE TABLE FOR LUG SIZE & QTY.)

GROUND LUG CONN.

(SEE BOM'S FOR QTY.)

FOR 600 kcmil LUGS:

CARRIAGE BOLT 1/2-13 x 1.50

KEPS NUT 1/2-13

TORQUE TO 250-350 LB-IN (21-29 LB-FT)

FOR 300 kcmil LUGS:

HEX SCREW 5/16-18 x 1.00

KEPS NUT 5/16-18

CONICAL SPRING WASHER 5/16

TORQUE TO 80-125 LB-IN (7-10 LB-FT)

(TYP.)

INSIDE VIEW

SCREW 1/4-20 x .75

KEPS NUT 1/4-20

NOTES: INSTALL WITH HEADS

OF SCREWS ON INSIDE OF

FLANGE COLLAR AND

KEPS NUTS ON OUTSIDE OF

FLANGE COLLAR.

(TYP.)

CARRIAGE BOLT 3/8-16 x 1 1/4

KEPS NUT 3/8-16

TORQUE TO 175-225 LB-IN (15-18.5 LB-FT)

NOTES: INSTALL THE HEADS OF

BOLTS FACING INSIDE OF FLANGE

COLLAR AND KEPS NUTS ON

OUTSIDE OF FLANGE COLLAR.

(TYP.)

T A251417 4-25-12 HY REDRAW AND SPECIFY TORQUE VALUES.

BOX END (2)

WELD ASSY (2)

TRI LOBE SCREWS

1/4-20 x .50

(TYP.)

BOX END

TRI LOBE SCREWS

1/4-20 x .50

(TYP.)

BOX TOP (2)

SPRING WASHER

3.00" OD x .625 ID

(TOP & BOTTOM)

HEX BOLT GR5 1/2-13 x 1.50

HEX NUT 1/2-13

NOTES: TORQUE TO

60-70 LB-FT (720-840 LB-IN)

(TYP.)

LUG CONNECTORS

(3 FOR 3 POLE,

4 FOR 4 POLE)

CARRIAGE BOLT

3/8-16 x 1 1/4

KEPS NUT 3/8-16

MOUNTING BRACKET

(TYP.)

PHASE/NEUTRAL LUG KIT

(SEE TABLE FOR

LUG SIZE & QTY.)

CARRIAGE BOLT

1/2-13 x 1.50

KEPS NUT 1/2-13

TORQUE TO 250-350 LB-IN

(21-29 LB-FT)

(TYP.)

SQ NECK BOLT

3/8-16 x 1 3/4

KEPS NUT

3/8-16

(TYP.)

SESA470726

Highlight

[TAA, BAA_COTS] End tap box, I- Line Busway, max 3000A rated, copper, bolt connection, 4 wire

CF2530GETBMB

Product availability: Non-Stock - Not normally stocked in distribution facility

Price*: 21,753.50 USD

Main Product End tap box

Range I-Line

Complementary Rated Current 3000 A copper

Rated Operational Voltage 600 V AC/DC 50/60 Hz

Length 39.38 in (1000.25 mm)

Height 28 in (711.2 mm)

Width 20.88 in (530.35 mm)

Material Copper: busbar

I-LINE Value End Bolt

Number of Phases 3 phase

For Use with Busbar trunking 3000 A copper

Protection Type 50 percent capacity integral ground bus

Wiring Configuration 4-wire

Environment Standards UL 857

CSA C22.2 No 27:1994

IEC 61439-6

Ordering and shipping details Category US10PE820043

Discount Schedule 0PE8

GTIN 785901120506

Returnability No

Country of origin US

Packing Units Unit Type of Package 1 PCE

Number of Units in Package 1 1

Package 1 Height 39.4 in (100.0 cm)

Product data sheet Specifications

Oct 11, 2024 1

Price is “List Price” and may be subject to a trade discount – check with your local distributor or retailer for actual price.

D is cl ai m er

: T hi s do cu m en ta tio n is n ot in te nd ed a s a su bs tit ut e fo r a nd is n ot to b e us ed fo r d et er m in in g su ita bi lit y or re lia bi lit y of th es e pr od uc ts fo r s pe ci fic u se r a pp lic at io ns

Package 1 Width 20.9 in (53.0 cm)

Package 1 Length 28.0 in (71.1 cm)

Package 1 Weight 260.0002 lb(US) (117.934 kg)

Contractual warranty Warranty 18 months

2 Oct 11, 2024

Sustainability

Green PremiumTM label is Schneider Electric’s commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products.

Guide to assessing product sustainability is a white paper that clarifies global eco-label standards and how to interpret environmental declarations.

Transparency RoHS/REACh

Well-being performance

Reach Free Of Svhc

Toxic Heavy Metal Free

Mercury Free

Rohs Exemption Information Yes

Pvc Free

Certifications & Standards

Reach Regulation REACh Declaration

Eu Rohs Directive Compliant

EU RoHS Declaration

China Rohs Regulation China RoHS declaration

Environmental Disclosure Product Environmental Profile

Circularity Profile No need of specific recycling operations

California Proposition 65 WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Learn more about Green Premium

Guide to assess a product’s sustainability

Oct 11, 2024 3 https://www.se.com/us/en/work/support/green-premium/ https://www.se.com/us/en/work/support/green-premium/ https://www.se.com/us/en/work/support/green-premium/ https://www.se.com/us/en/work/support/green-premium/ https://www.se.com/us/en/work/support/green-premium/ https://www.se.com/us/en/work/support/green-premium/ https://www.se.com/us/en/about-us/sustainability/guide-to-product-sustainability.jsp https://www.se.com/us/en/about-us/sustainability/guide-to-product-sustainability.jsp https://www.se.com/us/en/about-us/sustainability/guide-to-product-sustainability.jsp https://www.se.com/us/en/about-us/sustainability/guide-to-product-sustainability.jsp https://www.se.com/us/en/about-us/sustainability/guide-to-product-sustainability.jsp https://www.se.com/us/en/about-us/sustainability/guide-to-product-sustainability.jsp https://download.schneider-electric.com/files?p_enDocType=Declaration+of+Conformity+%28Sustainability%29&p_Doc_Ref=CF2530GETBMB_ROHS_DECLARATION&p_FileName=CF2530GETBMB_ROHS_DECLARATION_US_en-US.pdf https://download.schneider-electric.com/files?p_enDocType=Declaration+of+Conformity+%28Sustainability%29&p_Doc_Ref=CF2530GETBMB_ROHS_DECLARATION&p_FileName=CF2530GETBMB_ROHS_DECLARATION_US_en-US.pdf https://download.schneider-electric.com/files?p_enDocType=Declaration+of+Conformity+%28Sustainability%29&p_Doc_Ref=CF2530GETBMB_ROHS_DECLARATION&p_FileName=CF2530GETBMB_ROHS_DECLARATION_US_en-US.pdf https://download.schneider-electric.com/files?p_enDocType=Declaration+of+Conformity+%28Sustainability%29&p_Doc_Ref=CF2530GETBMB_REACH_DECLARATION&p_FileName=CF2530GETBMB_REACH_DECLARATION_US_en-US.pdf https://download.schneider-electric.com/files?p_enDocType=Declaration+of+Conformity+%28Sustainability%29&p_Doc_Ref=CF2530GETBMB_REACH_DECLARATION&p_FileName=CF2530GETBMB_REACH_DECLARATION_US_en-US.pdf https://download.schneider-electric.com/files?p_enDocType=Declaration+of+Conformity+%28Sustainability%29&p_Doc_Ref=CF2530GETBMB_REACH_DECLARATION&p_FileName=CF2530GETBMB_REACH_DECLARATION_US_en-US.pdf https://download.schneider-electric.com/files?p_Doc_Ref=CF2530GETBMB_ROHS_DECLARATION&p_FileName=CF2530GETBMB_ROHS_DECLARATION_US_en-US.pdf https://download.schneider-electric.com/files?p_Doc_Ref=CF2530GETBMB_ROHS_DECLARATION&p_FileName=CF2530GETBMB_ROHS_DECLARATION_US_en-US.pdf https://download.schneider-electric.com/files?p_Doc_Ref=CF2530GETBMB_ROHS_DECLARATION&p_FileName=CF2530GETBMB_ROHS_DECLARATION_US_en-US.pdf https://download.schneider-electric.com/files?p_enDocType=Declaration+of+Conformity+%28Sustainability%29&p_Doc_Ref=CF2530GETBMB_ROHS_CHINA_DECLARATION&p_FileName=CF2530GETBMB_ROHS_CHINA_DECLARATION_US_en-US.pdf https://download.schneider-electric.com/files?p_enDocType=Declaration+of+Conformity+%28Sustainability%29&p_Doc_Ref=CF2530GETBMB_ROHS_CHINA_DECLARATION&p_FileName=CF2530GETBMB_ROHS_CHINA_DECLARATION_US_en-US.pdf https://download.schneider-electric.com/files?p_enDocType=Declaration+of+Conformity+%28Sustainability%29&p_Doc_Ref=CF2530GETBMB_ROHS_CHINA_DECLARATION&p_FileName=CF2530GETBMB_ROHS_CHINA_DECLARATION_US_en-US.pdf https://download.schneider-electric.com/files?p_enDocType=Environmental+Disclosure&p_Doc_Ref=ENVPEP1407014EN https://download.schneider-electric.com/files?p_enDocType=Environmental+Disclosure&p_Doc_Ref=ENVPEP1407014EN https://download.schneider-electric.com/files?p_enDocType=Environmental+Disclosure&p_Doc_Ref=ENVPEP1407014EN