Building Library 7 - Marshall _ Lufkin W-O list May .pdf

MAXIMO

W/O

W/O

Type W/O Sub Type W/O Description

27768183 CM CORRECT

TX0130 1ST FLOOR COURTROOM

TEMP ADJUST

27768313 CM CORRECT

TX01302ND FLOOR JUDGE'S

CHAMBERS TEMP ADJUST

27768455 CM CORRECT

TX0130 2ND FLOOR KECIA'S

OFFICE & ATTORNEY

CONFERENCE ROOM

27750750 CM CORRECT

TX0130 2ND FLOOR JUDGE'S

CHAMBERS TEMP ADJUST

27750756 CM CORRECT

TX0130 2ND FLOOR ATTORNEY

CONFERENCE & KECIA'S OFFICE

TEMP ADJUST

27750774 WR SERVCALL

TX0130 AREA COLD MAKE TEMP

ADJUST

27678777 CM CORRECT

TX0130 1ST FLOOR REGULATE

BUILDING TEMPS

27695910 CM CORRECT

TX0130 1ST FLOOR AHU ROOM

REGULATE TEMPS IN BUILDING

27695918 CM CORRECT

TX0130 2ND FLOOR REPORTER

CONFERENCE ROOM TEMP

ADJUST

27695924 CM CORRECT

TX0130 2ND FLOOR JUDGES

CHAMBERS TEMP ADJUST

27617497 CM CORRECT

TX0130 2ND FLOOR JUDGE'S

CHAMBERS TEMP ADJUST

27617711 CM CORRECT

TX0130 2ND FLOOR KECIA'S

OFFICE TEMP ADJUST

27617789 CM CORRECT

TX0130 1ST FLOOR CHILLER

ROOM DISABLE CHILLER

27617897 CM CORRECT

TX0130 1ST FLOOR BOILER ROOM

ENABLE BOILER FOR TEMP

ADJUST

27611155 CM CORRECT

TX0130 1ST FLOOR BOILER ROOM

TEMP ADJUST

27611237 CM CORRECT

TX0130 1ST FLOOR CHILLER

ROOM TEMP ADJUST

27611248 CM CORRECT

TX0130 2ND FLOOR JUDGE'S

CHAMBERS TEMP ADJUST

27611252 CM CORRECT

TX0130 2ND FLOOR KECIA'S

OFFICE TEMP ADJUST

27610988 CM CORRECT

TX0130 1ST FLOOR CHILLER

ROOM TEMP ADJUST

27610993 CM CORRECT

TX0130 1ST FLOOR BOILER ROOM

TEMP ADJUST

27611002 CM CORRECT

TX0130 2ND FLOOR JUDGE'S

CHAMBERS TEMP ADJUST

27611027 CM CORRECT

TX0130 2ND FLOOR KECIA'S

OFFICE TEMP ADJUST

27598530 CM CORRECT TX0130 1ST FLOOR TEMP ADJUST

27598533 CM CORRECT

TX0130 BUILDING IS COLD MADE

TEMP ADJUST

27598536 CM CORRECT

TX0130 BUILDING IS COLD MADE

TEMP ADJUST

27598540 CM CORRECT

TX0130 BUILDING IS COLD MADE

TEMP ADJUST

27598547 WR SERVCALL

TX0130 DRAIN PIPE 1ST FLOOR

CHILLER ROOM

27576982 CM CORRECT

TC0130 DISABLE CHILLER FOR

TEMP ADJUST

27576990 CM CORRECT

TX0130 ENABLED BOILER FOR

TEMP ADJUST

27576994 CM CORRECT

TX0130 2ND FLOOR JUDGE'S

CHAMBERS TEMP ADJUST

27577000 CM CORRECT

TX0130 2ND FLOOR KECIA'S

OFFICE TEMP ADJUST

27576963 CM CORRECT

TX0130 DISABLE CHILLER FOR

TEMP ADJUST

27576967 CM CORRECT

TX0130 ENABLE BOILER FOR

TEMP ADJUST

27576973 CM CORRECT

TX0130 2ND FLOOR JUDGE'S

CHAMBERS TEMP ADJUST

27576979 CM CORRECT

TX0130 2ND FLOOR KECIA'S

OFFICE TEMP ADJUST

27352610 WR SERVCALL

TX0130 ESCORT CITY OF

MARSHALL FOR SIDE WALK

27352781 CM CORRECT

TX0130 ESCORT RUDD FOR RZP

INSPECTION

27343416 CM CORRECT

TX0130 2ND FLOOR JUDGE'S

CHAMBERS TEMP ADJUST

27343547 CM CORRECT

TX0130 1ST FLOOR BOILER ROOM

TEMP ADJUST

27343663 CM CORRECT

TX0130 1ST FLOOR CHILLER

ROOM TEMP ADJUST

27343777 CM CORRECT

TX0130 2ND FLOOR JUDGE'S

CHAMBERS TEMP ADJUST

27343906 CM CORRECT

TX0130 2ND FLOOR KECIA'S

OFFICE TEMP ADJUST

27249794 CM CORRECT

TX0130 2ND FLOOR MAIN

COURTROOM TEMP ADJUST

27249911 CM CORRECT

CHAMBERS TEMP ADJUST

27250002 CM CORRECT

TX0130 2ND FLOOR KECIA'S

OFFICE TEMP ADJUST

26967981 GSAI NORMAL TX0130 Treat for weeds

26967988 OMI INITIAL TX0130 Mow the grass

27249265 CM CORRECT

TX0126 WINDOW WELLS AND

DRAINS NEED CLEANING

26961328 CM CORRECT

TX0130 1ST FLOOR CHILLER

ROOM TEMP ADJUST

26961455 CM CORRECT

TX0130 1ST FLOOR BOILER ROOM

TEMP ADJUST

26961069 CM CORRECT

TX0019 2ND FLOOR KECIA'S

OFFICE TEMP ADJUST

26961210 CM CORRECT

TX0130 2ND FLOOR JUDGE'S

CHAMBERS

26800449 PM PREVENT

Leave transmitter panel in normal operating condition with door locked.

Inform involved personnel that testing is complete.

26800444 PM PREVENT Clean interior of transmitter cabinet.

26800439 PM PREVENT

Check the operation of each transmitter in all modes of operation by actuation of devices or contacts within the related fire alarm panel.

26800434 PM PREVENT

Check each transmitter for proper code wheel alignment, loose or burned contacts or terminals.

26800432 PM PREVENT

Check standby batteries (if located in the panel) for signs of overcharging, heat, and leakage.

26800430 PM PREVENT

Check battery charge current (be sure it is within manufacturer's limits).

26800428 PM PREVENT

Check standby battery voltage under load for a minimum of 5 minutes (if applicable).

26800426 PM PREVENT

Check power supply output voltage in normal and under load conditions.

26800424 PM PREVENT Check all fuses.

26800422 PM PREVENT

Check all lamps/LEDS (including remote annunciators).

26800420 PM PREVENT

Inspect the cabinet for damage

(exterior and interior) including locks, door hinges, and plastic covers.

26800418 PM PREVENT

When work requires the actuation of building evacuation systems, the work must be performed after hours and must be coordinated through the field office manager to prevent the unnecessary evacuation of the building's occupants.

26800416 PM PREVENT Deficiencies must be recorded.

26800414 PM PREVENT

The work required by this procedure may cause the activation of the building fire alarm system and/or supervisory signal to the control center. The Field Office Manager and the control center that will receive the signal must be notified prior to start

26800412 PM PREVENT

PM-TX0130ZZ-ALM-F15B-1, Fire

Detection and Alarm System

26800362 PM PREVENT

If treatment is not effective, it may require change in current methods and procedures.

26800358 PM PREVENT

Record test results, action taken, type of chemicals, and treatment quantities used.

26800354 PM PREVENT

If make up is excessive, determine source of leaks and correct.

26800350 PM PREVENT

Add or adjust chemical and biological treatment dosages and water blow down as appropriate.

26800346 PM PREVENT

Test each system for proper pH, alkalinity, total dissolved, hardness, conductivity, scale and corrosion inhibitors, and sludge conditioners.

Test supply water for base conditions.

26800343 PM PREVENT

Inspect boiler and piping system to determine effectiveness of water treatment.

26800340 PM PREVENT

When boilers are out of service, they must be protected from corrosion either by draining the boiler and keeping surfaces thoroughly dry or by completely filling the boiler with properly tested with water.

26800336 PM PREVENT

Follow the Recommended Rules for

Care and Operation of Heating (or

Power) Boilers as contained in the

American Society of Mechanical

Engineers.

26800332 PM PREVENT Maintain records and test results.

26800330 PM PREVENT

Physical inspections of boilers and supply and return piping systems are to be made to determine water treatment effectiveness.

26800327 PM PREVENT

Special attention must be paid to infrequently used boilers, or boilers subjected to long periods of idleness.

26800323 PM PREVENT

Ensure chemicals are properly stored, test equipment clean, and that chemicals have not passed expiration date.

26800319 PM PREVENT

Select water treatment methods which protect the life of equipment, maximize heat transfer, and minimize scale, corrosion, solid matter buildup, biological growth, and water usage.

26800315 PM PREVENT

Maintenance includes chemicals, chemical feeding, maintaining proper water conditions, controlling blow down, protecting idle equipment, and records.

26800313 PM PREVENT

Water treatment must be based on proven standard engineering practices. Treatment methods that claim mysterious magnetic or catalytic forces shall not be used. Follow treatment methods as directed by the manufacturer or water treatment company.

26800311 PM PREVENT

Water treatment specialists must be properly trained.

26800309 PM PREVENT

Be familiar with the Material Safety

Data Sheets of any chemicals used in the water treatment program.

26800307 PM PREVENT

Chemicals must comply with the

Environmental Protection Agency

(EPA) regulations and handled in accordance with occupational safety requirements. Employ personal protection against corrosive or hazardous treatment chemicals as appropriate.

26800305 PM PREVENT

PM-TX0130ZZ-WTM-W09A-1, Water

Treatment (Chemical)

26800299 PM PREVENT

Check systems for cleanliness and clean if necessary.

26800297 PM PREVENT

Operate valve in full open and close position. Loss of ability to close tightly will require inspection of valve seals and discs for wear and contaminate build- up.

26800295 PM PREVENT

Assure that area is free of obstructions, that activation mechanisms are accessible to personnel in a distressed condition.

26800292 PM PREVENT

Activate the unit to flush the line and verify proper operation.

26800290 PM PREVENT

Where flow alarms have been installed, check with responding unit before activating the unit.

26800284 PM PREVENT

Where units have been sealed, be certain seals are available to re-seal the unit after PM is accomplished.

26800281 PM PREVENT

On non-plumbed units (units containing their own water supply), use manufacturer's instruction to perform maintenance.

26800276 PM PREVENT

Review manufacturer's operation and maintenance instructions.

26800271 PM PREVENT

PM-TX0130ZZ-EYE-W02A-1,

Eyewash/Shower Unit

26800252 PM PREVENT Clean up work area and remove

26800251 PM PREVENT Remove tags, and restore to service.

26800250 PM PREVENT

Install new filters. Make sure direction of airflow corresponds to the airflow shown on the filter and filters are properly sized to cover the opening.

26800249 PM PREVENT Inspect frame, clamps, etc.

26800248 PM PREVENT Vacuum filter section of air handler.

26800247 PM PREVENT Remove old filters.

26800245 PM PREVENT

Filters should be replaced more often when static pressure readings indicate.

26800243 PM PREVENT

De-energize, lock out, and tag fan electrical circuit.

26800241 PM PREVENT PM-TX0130ZZ-FLT-F32A-2, Filter, Air

26800233 PM PREVENT Clean interior of cabinet.

26800231 PM PREVENT Clean and/or replace filters

26800229 PM PREVENT Clean interior of cabinet.

26800227 PM PREVENT Clean and/or replace filters

26800225 PM PREVENT

De-energize, lock out, and tag electrical circuits.

26800222 PM PREVENT

Obtain and review manufacturer's instructions.

26800219 PM PREVENT

Schedule outage with operating personnel.

26800215 PM PREVENT

De-energize, lock out, and tag electrical circuits.

26800211 PM PREVENT

Schedule outage with operating personnel.

26800208 PM PREVENT

PM-TX0130ZZ-VFD-X50B-2, Variable

Frequency Drive

26800193 PM PREVENT

Check for correct time on time stamp.

Reset if necessary.

26800192 PM PREVENT

Inspect for legibility, that it is properly coded, and for punctures or markings on tape.

26800191 PM PREVENT

Manually move ribbon to prevent ink from drying. (Papermarking type).

26800190 PM PREVENT

Examine alignment and tension of paper tape and supply of tape on reels. Install new tape when needed.

26800189 PM PREVENT

Check prewound mechanisms.

Rewind if necessary.

26800187 PM PREVENT Clean recording devices.

26800185 PM PREVENT

This procedure is to be accomplished once weekly during the daily test and inspection required in Guide No. F-

15C.

26800183 PM PREVENT Review manufacturer's instructions.

26800180 PM PREVENT

PM-TX0130ZZ-ALM-F16A-1, Fire

Detection and Alarm System

26800155 PM PREVENT

Affix permanent record on extinguisher with year of hydrostatic

26800153 PM PREVENT

Recharge extinguisher according to manufacturer's instructions.

26800151 PM PREVENT

Weigh replacement cartridge to insure that it is full of gas.

26800149 PM PREVENT 150 degrees F.

26800146 PM PREVENT

All dry chemical and dry powder extinguishers must have all traces of water removed from extinguishing agent, shell, hose and nozzle. A heated air stream is recommended with its temperature not exceeding

26800143 PM PREVENT

Observe shell and gauge for any distortion or leakage.

26800141 PM PREVENT

Secure shell in protective cage and apply proper test pressure. Pressure to be applied at rate so test pressure is reached within one minute. Type of

Extinguisher Hydrostatic Test

Pressure Carbon dioxide 5/3 the service pressure

26800138 PM PREVENT

Fill with water and connect the test pump.

26800136 PM PREVENT

Insert plug into shell opening.

(External cartridge type extinguishers only).

26800135 PM PREVENT

Dismantle and remove all traces of extinguishing agent (dry chemical or dry powder), from inside of shell and hose assembly.

26800134 PM PREVENT

Operate stored pressure and cartridge type extinguisher and check performance.

26800133 PM PREVENT

Any cylinders that have been repaired by soldering or welding, damaged, corroded, burned, or had calcium chloride type of extinguishing agent used in stainless steel extinguisher shall not be hydrostatically tested but destroyed.

26800132 PM PREVENT

Hydrostatic testing of extinguishers requires experienced personnel and suitable testing equipment.

26800131 PM PREVENT

26800130 PM PREVENT

Testing should be in accordance with

NFPA Standard No.

26800129 PM PREVENT

Dry chemical extinguishers, with the exception of ones with stainless steel shells (5 year) should be tested on a

1year basis.

26800128 PM PREVENT

Soda acid, carbon dioxide, and foam extinguishers should be tested on a 5 year basis.

26800127 PM PREVENT

PM-TX0130ZZ-FEX-F24A-1, Fire

Extinguishers

26800116 PM PREVENT Clean up work area and remove

26800114 PM PREVENT Remove tags, and restore to service.

26800112 PM PREVENT

Install new filters. Make sure direction of airflow corresponds to the airflow shown on the filter and filters are properly sized to cover the opening.

26800110 PM PREVENT Inspect frame, clamps, etc.

26800108 PM PREVENT Vacuum filter section of air handler.

26800106 PM PREVENT Remove old filters.

26800104 PM PREVENT

Filters should be replaced more often when static pressure readings indicate.

26800102 PM PREVENT

De-energize, lock out, and tag fan electrical circuit.

26800100 PM PREVENT PM-TX0130ZZ-FLT-F32A-1, Filter, Air

26800074 PM PREVENT Clean up work area and remove

26800072 PM PREVENT Remove tags, and restore to service.

26800069 PM PREVENT

Install new filters. Make sure direction of airflow corresponds to the airflow shown on the filter and filters are properly sized to cover the opening.

26800065 PM PREVENT Inspect frame, clamps, etc.

26800061 PM PREVENT Vacuum filter section of air handler.

26800057 PM PREVENT Remove old filters.

26800054 PM PREVENT

Filters should be replaced more often when static pressure readings indicate.

26800048 PM PREVENT

De-energize, lock out, and tag fan electrical circuit.

26800044 PM PREVENT PM-TX0130ZZ-FLT-F32A-3, Filter, Air

26800004 PM PREVENT

Report any deficiencies on GSA Form

26800001 PM PREVENT

Restore flag pole special wrench in storage rack.

26799997 PM PREVENT

Leave in the raised position and install locking pin.

26799994 PM PREVENT

Raise and lower several times and check for proper operation.

26799990 PM PREVENT Check rope for deterioration.

26799987 PM PREVENT Grease pivot pin.

26799984 PM PREVENT Grease rack and gear assembly.

26799979 PM PREVENT

Check for worn or damaged rack and gear and pivot pins in flag pole.

26799975 PM PREVENT Clean the rack and gear assembly.

26799973 PM PREVENT

Using special wrench, lower the flag pole.

26799971 PM PREVENT Remove the locking pin.

26799966 PM PREVENT

Accomplish this PM when the flag is not being flown or can be lowered.

26799961 PM PREVENT

Do not accomplish this PM during adverse weather conditions.

26799958 PM PREVENT

PM-TX0130ZZ-EFP-P21A-1,

Flagpole, Electric

26799935 PM PREVENT

Clean off any corrosion or rust on damper frame and or damper blades, coat with proper type and color paint.

26799933 PM PREVENT

Lubricate actuator linkage sparingly.

Wipe off excess lubricant. DO NOT

LUBRICATE actuator/drive stem.

26799931 PM PREVENT

Check for air leaks around actuator and in air line between controller and actuator.

26799929 PM PREVENT

Check actuator for proper operation.

If it does not stroke properly, check for binding drive stem. If actuator still does not operate properly, replace the diaphragm (pneumatic actuators).

26799927 PM PREVENT

Lubricate mechanical connections sparingly. Wipe off excess.

26799925 PM PREVENT

Check actuator/damper linkage for proper operation. Adjust if needed.

Tighten operator arm set screws.

26799922 PM PREVENT

Check damper surfaces for wear and clean vanes.

26799919 PM PREVENT

Observe damper operation through full operating range, by activating controller. Adjust linkage on vanes if out of alignment.

26799916 PM PREVENT

Check damper for freedom of movement and proper operation.

26799913 PM PREVENT

PM-TX0130ZZ-DPP-C02A-1,

Damper, Powered

26798926 PM PREVENT Lubricate the stem and lever pivot.

26798923 PM PREVENT Clean the valve body.

26798921 PM PREVENT

Check that the discharge piping support is tight and not causing stress on the valve.

26798918 PM PREVENT

Inspect support brackets and tighten as required.

26798916 PM PREVENT

Inspect and hand lift the manual lifting lever, checking for binding of the stem or seat. Note that valve returns to proper position when the lever is released.

26798913 PM PREVENT

Inspect condition of spring, flanges, and threaded connections.

26798911 PM PREVENT

Check with foreman and operating personnel before performing this test.

26798909 PM PREVENT

The safety relief valves are designed to be operated by system pressure and should only be tested when sufficient pressure exists to clear the seating area of any debris.

26798907 PM PREVENT PM-TX0130ZZ-VLV-V02A-1, Valves

26798601 PM PREVENT

Leave transmitter panel in normal operating condition with door locked.

Inform involved personnel that testing is complete.

26798600 PM PREVENT Clean interior of transmitter cabinet.

26798599 PM PREVENT

Check the operation of each transmitter in all modes of operation by actuation of devices or contacts within the related fire alarm panel.

26798598 PM PREVENT

Check each transmitter for proper code wheel alignment, loose or burned contacts or terminals.

26798597 PM PREVENT

Check standby batteries (if located in the panel) for signs of overcharging, heat, and leakage.

26798596 PM PREVENT

Check battery charge current (be sure it is within manufacturer's limits).

26798595 PM PREVENT

Check standby battery voltage under load for a minimum of 5 minutes (if applicable).

26798594 PM PREVENT

Check power supply output voltage in normal and under load conditions.

26798593 PM PREVENT Check all fuses.

26798592 PM PREVENT

Check all lamps/LEDS (including remote annunciators).

26798591 PM PREVENT

Inspect the cabinet for damage

(exterior and interior) including locks, door hinges, and plastic covers.

26798590 PM PREVENT

When work requires the actuation of building evacuation systems, the work must be performed after hours and must be coordinated through the field office manager to prevent the unnecessary evacuation of the building's occupants.

26798589 PM PREVENT Deficiencies must be recorded.

26798587 PM PREVENT

The work required by this procedure may cause the activation of the building fire alarm system and/or supervisory signal to the control center. The Field Office Manager and the control center that will receive the signal must be notified prior to start

26798584 PM PREVENT

PM-TX0126ZZ-ALM-F15B-1, Fire

Detection and Alarm System

26798560 PM PREVENT Lubricate the stem and lever pivot.

26798558 PM PREVENT Clean the valve body.

26798556 PM PREVENT

Check that the discharge piping support is tight and not causing stress on the valve.

26798554 PM PREVENT

Inspect support brackets and tighten as required.

26798552 PM PREVENT

Inspect and hand lift the manual lifting lever, checking for binding of the stem or seat. Note that valve returns to proper position when the lever is released.

26798550 PM PREVENT

Inspect condition of spring, flanges, and threaded connections.

26798548 PM PREVENT

Check with foreman and operating personnel before performing this test.

26798546 PM PREVENT

The safety relief valves are designed to be operated by system pressure and should only be tested when sufficient pressure exists to clear the seating area of any debris.

26798545 PM PREVENT PM-TX0126ZZ-VLV-V02A-1, Valves

26798538 PM PREVENT

Affix permanent record on extinguisher with year of hydrostatic

26798536 PM PREVENT

Recharge extinguisher according to manufacturer's instructions.

26798534 PM PREVENT

Weigh replacement cartridge to insure that it is full of gas.

26798532 PM PREVENT 150 degrees F.

26798530 PM PREVENT

All dry chemical and dry powder extinguishers must have all traces of water removed from extinguishing agent, shell, hose and nozzle. A heated air stream is recommended with its temperature not exceeding

26798527 PM PREVENT

Observe shell and gauge for any distortion or leakage.

26798524 PM PREVENT

Secure shell in protective cage and apply proper test pressure. Pressure to be applied at rate so test pressure is reached within one minute. Type of

Extinguisher Hydrostatic Test

Pressure Carbon dioxide 5/3 the service pressure

26798522 PM PREVENT

Fill with water and connect the test pump.

26798519 PM PREVENT

Insert plug into shell opening.

(External cartridge type extinguishers only).

26798516 PM PREVENT

Dismantle and remove all traces of extinguishing agent (dry chemical or dry powder), from inside of shell and hose assembly.

26798513 PM PREVENT

Operate stored pressure and cartridge type extinguisher and check performance.

26798511 PM PREVENT

Any cylinders that have been repaired by soldering or welding, damaged, corroded, burned, or had calcium chloride type of extinguishing agent used in stainless steel extinguisher shall not be hydrostatically tested but destroyed.

26798507 PM PREVENT

Hydrostatic testing of extinguishers requires experienced personnel and suitable testing equipment.

26798503 PM PREVENT

26798500 PM PREVENT

Testing should be in accordance with

NFPA Standard No.

26798496 PM PREVENT

Dry chemical extinguishers, with the exception of ones with stainless steel shells (5 year) should be tested on a

1year basis.

26798493 PM PREVENT

Soda acid, carbon dioxide, and foam extinguishers should be tested on a 5 year basis.

26798490 PM PREVENT

PM-TX0126ZZ-FEX-F24A-1, Fire

Extinguishers

26798473 PM PREVENT

If treatment is not effective, it may require change in current methods and procedures.

26798471 PM PREVENT

Record test results, action taken, type of chemicals, and treatment quantities used.

26798468 PM PREVENT

If make up is excessive, determine source of leaks and correct.

26798464 PM PREVENT

Add or adjust chemical and biological treatment dosages and water blow down as appropriate.

26798461 PM PREVENT

Test each system for proper pH, alkalinity, total dissolved, hardness, conductivity, scale and corrosion inhibitors, and sludge conditioners.

Test supply water for base conditions.

26798459 PM PREVENT

Inspect boiler and piping system to determine effectiveness of water treatment.

26798457 PM PREVENT

When boilers are out of service, they must be protected from corrosion either by draining the boiler and keeping surfaces thoroughly dry or by completely filling the boiler with properly tested with water.

26798455 PM PREVENT

Follow the Recommended Rules for

Care and Operation of Heating (or

Power) Boilers as contained in the

American Society of Mechanical

Engineers.

26798453 PM PREVENT Maintain records and test results.

26798451 PM PREVENT

Physical inspections of boilers and supply and return piping systems are to be made to determine water treatment effectiveness.

26798449 PM PREVENT

Special attention must be paid to infrequently used boilers, or boilers subjected to long periods of idleness.

26798447 PM PREVENT

Ensure chemicals are properly stored, test equipment clean, and that chemicals have not passed expiration date.

26798445 PM PREVENT

Select water treatment methods which protect the life of equipment, maximize heat transfer, and minimize scale, corrosion, solid matter buildup, biological growth, and water usage.

26798443 PM PREVENT

Maintenance includes chemicals, chemical feeding, maintaining proper water conditions, controlling blow down, protecting idle equipment, and records.

26798439 PM PREVENT

Water treatment must be based on proven standard engineering practices. Treatment methods that claim mysterious magnetic or catalytic forces shall not be used. Follow treatment methods as directed by the manufacturer or water treatment company.

26798436 PM PREVENT

Water treatment specialists must be properly trained.

26798434 PM PREVENT

Be familiar with the Material Safety

Data Sheets of any chemicals used in the water treatment program.

26798432 PM PREVENT

Chemicals must comply with the

Environmental Protection Agency

(EPA) regulations and handled in accordance with occupational safety requirements. Employ personal protection against corrosive or hazardous treatment chemicals as appropriate.

26798428 PM PREVENT

PM-TX0126ZZ-WTM-W-09A-1, Water

Treatment (Chemical)

26798400 PM PREVENT

Operate lift through it's full range of travel, in both directions, using a load if possible. Note operation of controls, safety devices, leveling, and other devices or features.

26798398 PM PREVENT

Check condition of drive chains or belts and adjust or replace as required.

26798395 PM PREVENT

Lubricate screw mechanisms, gears, sprockets and chains, pillow blocks, bearings, etc., as required.

26798393 PM PREVENT

Inspect structural features, framework, support members, anchor bolts, lift platform, etc., for condition and structural integrity. Tighten any loose bolts or screws.

26798391 PM PREVENT

Thoroughly clean the drive assembly, lift platform, travel area, etc. Remove trash and debris.

26798389 PM PREVENT Review manufacturer's instructions.

26798387 PM PREVENT

De-energize, lock out, and tag electrical circuits.

26798385 PM PREVENT

Review the Standard Operating

Procedures for "Controlling

Hazardous Energy Sources".

26798382 PM PREVENT

PM-TX0126ZZ-WLF-W07A-1,

Wheelchair Lift

26797425 PM PREVENT Clean up work area.

26797421 PM PREVENT Test.

26797418 PM PREVENT Clean exterior of unit.

26797416 PM PREVENT Check mounting supports.

26797413 PM PREVENT

Lubricate wheels and pivot points as required.

26797410 PM PREVENT Replace removed access panels.

26797404 PM PREVENT

Clean and check operation of color slides.

26797396 PM PREVENT Clean housing interior.

26797392 PM PREVENT

Check bulb and socket, clean or change as required.

26797388 PM PREVENT

Lubricate and check operation of all slide rods, adjust rods and linkage.

26797386 PM PREVENT Clean lens and reflector.

26797382 PM PREVENT

Check connection at, and operation of switch. Lubricate as needed.

26797380 PM PREVENT Remove necessary access panels.

26797378 PM PREVENT

Check power supply cord and connections to plug.

26797375 PM PREVENT FREQUENCY: Monthly

26797370 PM PREVENT

Obtain and review manufacturer's instructions and precautions.

26797367 PM PREVENT

Keep record of hour usage of spotlight bulb, noting its estimated life and date of installation.

26797363 PM PREVENT Special Instructions:

26797360 PM PREVENT

This PM guide applies to both fixed and portable spotlights used in the lighting and highlighting of performers and stage areas in auditoriums and large conference rooms.

26797356 PM PREVENT Application:

26797352 PM PREVENT SPOTLIGHT, FIXED OR PORTABLE

26797347 PM PREVENT L-08

26797344 PM PREVENT d. Inspect cables for deterioration.

26797340 PM PREVENT

c. Clean terminals and tighten connections.

26797337 PM PREVENT

b. Wipe accumulated dirt from battery and dispose of rag.

26797335 PM PREVENT

a. Check electrolyte level and add distilled water as required to bring to proper level.

26797333 PM PREVENT Batteries.

26797331 PM PREVENT

f. Check wiring and shunts for cracked or broken insulation or loose connections.

26797329 PM PREVENT

e. Inspect and clean interlocks and lightly lubricate friction points.

26797327 PM PREVENT

d. Inspect contactor/switch arc chutes for cracks or pitting and clean.

26797323 PM PREVENT

c. Inspect contacts for arcing or improper contacting and clean if required.

26797321 PM PREVENT

b. Check operation and condition of relays, switches, capacitors, resistors, overloads, wiring, connections, and fuses.

26797318 PM PREVENT

a. Clean interior of unit with blow or vacuum.

26797316 PM PREVENT Controllers.

26797314 PM PREVENT c. Lubricate drive motor and gears.

26797311 PM PREVENT

b. Clean end bells, commutators, windings, and brush rigging. Check brush wear and tension in accordance with manufacturer's instructions.

26797307 PM PREVENT

a. Check oil level and oil pickup. Add or replace as required. Review the

Material Safety Data Sheets (MSDS) for proper disposal of used oil. If appropriate, recycle oil at an authorized station. Contact the

Regional S&EM office if you have any quest

26797303 PM PREVENT

Review manufacturer's instructions.

Checkpoints: 1. Motors and generators.

26797299 PM PREVENT Special Instructions:

26797297 PM PREVENT FREQUENCY: Semiannual

26797295 PM PREVENT

LOCOMOTIVE, DIESEL,

ELECTRICAL CONTROLS

26797293 PM PREVENT L-07

26797291 PM PREVENT e. Remove and clean fuel injectors.

26797289 PM PREVENT

d. Check tension and condition of all belts. Adjust or replace as necessary.

26797287 PM PREVENT

c. Inspect cooling system for leaks and test antifreeze solution.

26797285 PM PREVENT

b. Change engine oil and oil filter.

Perform lube at all lubrication points.

Review the Material Safety Data

Sheets (MSDS) for proper disposal of used oil. If appropriate, recycle oil at an authorized station. Contact the

Regional S&EM office if you

26797283 PM PREVENT a. Change fuel and air filters.

26797281 PM PREVENT Diesel engine:

26797279 PM PREVENT

Air compressor - refer to A-04 air compressor guide card.

26797277 PM PREVENT

Check all air cocks for leaks, holding, and smooth operation.

26797275 PM PREVENT

Inspect all pneumatic lines, hoses, and connections for leaks and deterioration.

26797273 PM PREVENT

Check packing in stuffing box and add or replace as required.

26797271 PM PREVENT

Inspect wheels for wear and lubricate bearings.

26797269 PM PREVENT

Check condition of brake shoes, brake hangers, brake rods, pins, linkage, and clevis. Check alignment of brake hanger and lubricate friction and pivot points.

26797267 PM PREVENT

Review manufacturer's instructions.

Checkpoints: 1. Inspect coupler, yoke, keys, and bumper for wear and condition. Lubricate pivot points.

26797265 PM PREVENT Special Instructions:

26797263 PM PREVENT FREQUENCY: Semiannual

26797261 PM PREVENT LOCOMOTIVE, DIESEL ENGINE

26797259 PM PREVENT L-06

26797257 PM PREVENT

Clean up work area on lawn, remove any debris around sprinkler heads.

26797255 PM PREVENT

On rotating types: Check through regulator and spring assembly for tightness. Lightly lubricate pivot arm and guide bushings. Check adjustment screw and retaining

26797253 PM PREVENT

Clean unit thoroughly and inspect for freedom of operation.

26797251 PM PREVENT

Replace washers and/or "O" rings if required.

26797249 PM PREVENT

Work to be performed prior to flushing out system. Checkpoints: 1.

Check nozzle and remove corrosion/encrustation.

26797247 PM PREVENT

PM-TX0126ZZ-LSP-L05A-1, Lawn

Sprinkler

26797240 PM PREVENT

Check systems for cleanliness and clean if necessary.

26797239 PM PREVENT

Operate valve in full open and close position. Loss of ability to close tightly will require inspection of valve seals and discs for wear and contaminate build- up.

26797238 PM PREVENT

Assure that area is free of obstructions, that activation mechanisms are accessible to personnel in a distressed condition.

26797237 PM PREVENT

Activate the unit to flush the line and verify proper operation.

26797236 PM PREVENT

Where flow alarms have been installed, check with responding unit before activating the unit.

26797234 PM PREVENT

Where units have been sealed, be certain seals are available to re-seal the unit after PM is accomplished.

26797232 PM PREVENT

On non-plumbed units (units containing their own water supply), use manufacturer's instruction to perform maintenance.

26797230 PM PREVENT

Review manufacturer's operation and maintenance instructions.

26797228 PM PREVENT

PM-TX0126ZZ-EYE-W02A-1,

Eyewash/Shower Unit

26958653 CM CORRECT

TX0130 WINDOW WELLS &

STAIRWELLS ARE DIRTY

26959903 CM CORRECT

TX0130 ESCORT THYSSENDRUP

FOR ELEVATOR INSPECTION

26960058 CM CORRECT TX0130 LANDSCAPING

26639968 CM CORRECT TX0130 2ND FLOOR TEMP ADJUST

26638343 CM CORRECT

TX0130 2ND FLOOR KECIA'S

OFFICE TEMP ADJUST

26638804 CM CORRECT

TX0130 2ND FLOOR JUDGE'S

CHAMBERS TEMP ADJUST

26639165 CM CORRECT

TX0130 1ST FLOOR BOILER ROOM

TEMP ADJUST

26639579 CM CORRECT

TX0130 1ST FLOOR CHILLER

ROOM TEMP ADJUST

26637434 CM CORRECT

TX0130 2ND FLOOR MAIN

COURTROOM TEMP ADJUST

26637849 CM CORRECT

TX0130 ESCORT POWERS OF

ARKANSAS FOR BAS PM

26617556 CM CORRECT TX0130 2ND FLOOR TEMP ADJUST

26617563 CM CORRECT

TX0130 2ND FLOOR JUDGE'S

CHAMBERS TEMP ADUST

26617572 CM CORRECT

TX0130 2ND FLOOR KECIA'S

OFFICE TEMP ADJUST

26617578 CM CORRECT

TX0130 1ST FLOOR CHILLER

ROOM

26617818 CM CORRECT

TX0130 LIGHT BULB OUT 2ND

FLOOR MAIN COURTROOM

26617802 CM CORRECT

TX0130 1ST FLOOR DISABLE

CHILLER FOR TEMP ADJUST

26617811 CM CORRECT TX0130 2ND FLOOR TEMP ADJUST

26615364 CM CORRECT

TX0130 2ND FLOOR KECIA'S

OFFICE TEMP ADJUST

26615370 CM CORRECT

TX0130 2ND FLOOR JUDGE'S

CHAMBERS TEMP ADJUST

26612643 CM CORRECT

TX0130 2ND FLOOR REGULATION

OF TEMP

26617711 CM CORRECT

TX0126 INSTALL TIMER FOR

EXTERIOR LIGHTS

26612622 CM CORRECT

CHAMBERS TEMP ADJUST

26612630 CM CORRECT

TX0130 2ND FLOOR KECIA'S

OFFICE TEMP ADJUST

26612632 CM CORRECT TX0130 1ST FLOOR BOILER ROOM

26612639 CM CORRECT

TX0130 CHILLER ROOM TEMP

ADJUST

26609726 CM CORRECT

TX0130 2ND FLOOR JUDGE'S

CHAMBERS TEMP ADJUST

26609730 CM CORRECT

TX0130 2ND FLOOR KECIA'S

OFFICE TEMP ADJUST

26600167 CM CORRECT

TX0130 2ND FLOOR JUDGE'S

CHAMBERS TEMP ADJUST

26600178 CM CORRECT

TX0130 2ND FLOOR KECIA'S

OFFICE TEMP ADJUST

26584618 CM CORRECT

TX0130 2ND FLOOR JUDGE'S

CHAMBERS TEMP ADJUST

26584698 CM CORRECT

TX0130 2ND FLOOR KECIA'S

OFFICE TEMP ADJUST

26582627 CM CORRECT

TX0130 Damper actuator on rooftop condenser not working

26582627 CM CORRECT

TX0130 Damper actuator on rooftop condenser not working

26582627 CM CORRECT

TX0130 Damper actuator on rooftop condenser not working

26584779 CM CORRECT

TX0130 1ST FLOOR CHILLER

ROOM REFRIGERANT TESTING

26585130 CM CORRECT

TX0130 1ST FLOOR CHILLER

ROOM ESCORT FOR CHILLER PM

26585140 CM CORRECT

TX0130 ROOF ESCORT

CONDENSER INSPECTION

26585015 CM CORRECT

TX0130 2ND FLOOR JUDGE'S

CHAMBERS TEMP ADJUST

26585067 CM CORRECT

TX0130 2ND FLOOR KECIA'S

OFFICE TEMP ADJUST

26575160 CM CORRECT TX0130 TEMP ADJUST

26575959 CM CORRECT TX0130 TEMP ADJUST

26575970 CM CORRECT TX0130 TEMP ADJUST

26552810 CM CORRECT

TX0126 CLEAN WINDOW WELL

AND DRAINS

26215584 CM EQFAIL TX0130 Chiller keeps going into alarm

26215584 CM EQFAIL TX0130 Chiller keeps going into alarm

26153819 GSAI MARS

TX0130 SECURE LIGHTING J-BOX

TO CODE

26148777 CM CORRECT

TX0130 2ND FLOOR JUDGE'S

CHAMBERS TEMP ADJUST

26148913 CM CORRECT

TX0130 2ND FLOOR KECIA'S

OFFICE TEMP ADJUST

26073165 GSAI MARS TX0130 1ST FLOOR BOILER ROOM

26073386 GSAI MARS

TX0130 1ST FOOR CHILLER ROOM

DRAIN STACK

26073386 GSAI MARS

TX0130 1ST FOOR CHILLER ROOM

DRAIN STACK

26073386 GSAI MARS

TX0130 1ST FOOR CHILLER ROOM

DRAIN STACK

26072968 GSAI MARS

TX0130 1ST FLOOR CHILLER

MECHANICAL ROOM

26072413 GSAI MARS TX0130 BREAKER PANEL

26041304 CM CORRECT

TX0130 1ST FLOOR BOILER ROOM

TEMP ADJUST

26041450 CM CORRECT

TX0130 1ST FLOOR CHILLER

ROOM TEMP ADJUST

26041576 CM CORRECT

TX0130 2ND FLOOR JUDGE'S

CHAMBERS TEMP ADJUST

26041702 CM CORRECT

TX0130 2ND FLOOR DEPT. KECIA'S

OFFICE TEMP ADJUST

25836634 CM CORRECT

TX0130 2ND FLOOR JUDGE'S

CHAMBERS TEMP ADJUST

25836644 CM CORRECT

TX0130 2ND FLOOR KECIA'S

OFFICE TEMP ADJUST

25836647 CM CORRECT

TX0130 1ST FLOOR BOILER ROOM

TEMP ADJUST

25836655 CM CORRECT

TX0130 1ST FLOOR CHILLER

ROOM TEMP ADJUST

25836692 CM CORRECT

TX0130 JUDGE'S CHAMBERS 2ND

FLOOR TEMP ADJUST

25833113 CM CORRECT

TX0130 2ND FLOOR JUDGE'S

CHAMBERS TEMP ADJUST

25833116 CM CORRECT

TX0130 2ND FLOOR DEP KECIA'S

OFFICE TEMP ADJUST

25829650 CM CORRECT

TX0126 WINDOW WELLS NEED

CLEANING

25828838 CM CORRECT

CHAMBERS TEMP ADJUST

25828845 CM CORRECT

TX0130 2ND FLOOR KECIA'S

OFFICE TEMP ADJUST

25825803 CM CORRECT

TX0130 2ND FLOOR JUDGE'S

CHAMBERS TEMP ADJUST

25825811 CM CORRECT

TX0130 2ND FLOOR KECIA'S

OFFICE TEMP ADJUST

25825820 CM CORRECT

TX0130 ENTIRE BUILDING TEMP

ADJUST

25765343 PM PREVENT

Leave transmitter panel in normal operating condition with door locked.

Inform involved personnel that testing is complete.

25765341 PM PREVENT Clean interior of transmitter cabinet.

25765339 PM PREVENT

Check the operation of each transmitter in all modes of operation by actuation of devices or contacts within the related fire alarm panel.

25765337 PM PREVENT

Check each transmitter for proper code wheel alignment, loose or burned contacts or terminals.

25765335 PM PREVENT

Check standby batteries (if located in the panel) for signs of overcharging, heat, and leakage.

25765333 PM PREVENT

Check battery charge current (be sure it is within manufacturer's limits).

25765331 PM PREVENT

Check standby battery voltage under load for a minimum of 5 minutes (if applicable).

25765329 PM PREVENT

Check power supply output voltage in normal and under load conditions.

25765327 PM PREVENT Check all fuses.

25765325 PM PREVENT

Check all lamps/LEDS (including remote annunciators).

25765323 PM PREVENT

Inspect the cabinet for damage

(exterior and interior) including locks, door hinges, and plastic covers.

25765321 PM PREVENT

When work requires the actuation of building evacuation systems, the work must be performed after hours and must be coordinated through the field office manager to prevent the unnecessary evacuation of the building's occupants.

25765319 PM PREVENT Deficiencies must be recorded.

25765317 PM PREVENT

The work required by this procedure may cause the activation of the building fire alarm system and/or supervisory signal to the control center. The Field Office Manager and the control center that will receive the signal must be notified prior to start

25765314 PM PREVENT

PM-TX0130ZZ-ALM-F15B-1, Fire

Detection and Alarm System

25765304 PM PREVENT

If treatment is not effective, it may require change in current methods and procedures.

25765303 PM PREVENT

Record test results, action taken, type of chemicals, and treatment quantities used.

25765302 PM PREVENT

If make up is excessive, determine source of leaks and correct.

25765301 PM PREVENT

Add or adjust chemical and biological treatment dosages and water blow down as appropriate.

25765300 PM PREVENT

Test each system for proper pH, alkalinity, total dissolved, hardness, conductivity, scale and corrosion inhibitors, and sludge conditioners.

Test supply water for base conditions.

25765299 PM PREVENT

Inspect boiler and piping system to determine effectiveness of water treatment.

25765298 PM PREVENT

When boilers are out of service, they must be protected from corrosion either by draining the boiler and keeping surfaces thoroughly dry or by completely filling the boiler with properly tested with water.

25765297 PM PREVENT

Follow the Recommended Rules for

Care and Operation of Heating (or

Power) Boilers as contained in the

American Society of Mechanical

Engineers.

25765296 PM PREVENT Maintain records and test results.

25765295 PM PREVENT

Physical inspections of boilers and supply and return piping systems are to be made to determine water treatment effectiveness.

25765294 PM PREVENT

Special attention must be paid to infrequently used boilers, or boilers subjected to long periods of idleness.

25765293 PM PREVENT

Ensure chemicals are properly stored, test equipment clean, and that chemicals have not passed expiration date.

25765292 PM PREVENT

Select water treatment methods which protect the life of equipment, maximize heat transfer, and minimize scale, corrosion, solid matter buildup, biological growth, and water usage.

25765291 PM PREVENT

Maintenance includes chemicals, chemical feeding, maintaining proper water conditions, controlling blow down, protecting idle equipment, and records.

25765290 PM PREVENT

Water treatment must be based on proven standard engineering practices. Treatment methods that claim mysterious magnetic or catalytic forces shall not be used. Follow treatment methods as directed by the manufacturer or water treatment company.

25765289 PM PREVENT

Water treatment specialists must be properly trained.

25765288 PM PREVENT

Be familiar with the Material Safety

Data Sheets of any chemicals used in the water treatment program.

25765287 PM PREVENT

Chemicals must comply with the

Environmental Protection Agency

(EPA) regulations and handled in accordance with occupational safety requirements. Employ personal protection against corrosive or hazardous treatment chemicals as appropriate.

25765286 PM PREVENT

PM-TX0130ZZ-WTM-W09A-1, Water

Treatment (Chemical)

25765285 PM PREVENT

Prepare a written service report as to test results and service performed and file with the buildings manager.

25765284 PM PREVENT

Test all software and firm ware programs for applied results.

25765283 PM PREVENT

Test all power supplies and battery charging networks.

25765282 PM PREVENT

Test and analyze results for systems operational integrity.

25765281 PM PREVENT

Clean, calibrate and adjust all central

(main-frame), remote (peripheral) and interface systems.

25765280 PM PREVENT

Obtain "AS BUILT" diagrams of installation.

25765279 PM PREVENT

Obtain and review manufacturer's information for servicing, testing and operating.

25765278 PM PREVENT

Schedule maintenance with operating personnel.

25765276 PM PREVENT

PM-TX0130ZZ-BAS-01-C04A-1,

Building Automation System, DDC

25765252 PM PREVENT Clean interior of cabinet.

25765250 PM PREVENT Clean and/or replace filters

25765248 PM PREVENT Clean interior of cabinet.

25765246 PM PREVENT Clean and/or replace filters

25765245 PM PREVENT

De-energize, lock out, and tag electrical circuits.

25765244 PM PREVENT

Obtain and review manufacturer's instructions.

25765242 PM PREVENT

Schedule outage with operating personnel.

25765241 PM PREVENT

De-energize, lock out, and tag electrical circuits.

25765240 PM PREVENT

Schedule outage with operating personnel.

25765239 PM PREVENT

PM-TX0130ZZ-VFD-X50B-1, Variable

Frequency Drive

25765238 PM PREVENT

Check systems for cleanliness and clean if necessary.

25765237 PM PREVENT

Operate valve in full open and close position. Loss of ability to close tightly will require inspection of valve seals and discs for wear and contaminate build- up.

25765236 PM PREVENT

Assure that area is free of obstructions, that activation mechanisms are accessible to personnel in a distressed condition.

25765235 PM PREVENT

Activate the unit to flush the line and verify proper operation.

25765234 PM PREVENT

Where flow alarms have been installed, check with responding unit before activating the unit.

25765233 PM PREVENT

Where units have been sealed, be certain seals are available to re-seal the unit after PM is accomplished.

25765232 PM PREVENT

On non-plumbed units (units containing their own water supply), use manufacturer's instruction to perform maintenance.

25765231 PM PREVENT

Review manufacturer's operation and maintenance instructions.

25765230 PM PREVENT

PM-TX0130ZZ-EYE-W02A-1,

Eyewash/Shower Unit

25765229 PM PREVENT

Check for correct time on time stamp.

Reset if necessary.

25765228 PM PREVENT

Inspect for legibility, that it is properly coded, and for punctures or markings on tape.

25765227 PM PREVENT

Manually move ribbon to prevent ink from drying. (Papermarking type).

25765226 PM PREVENT

Examine alignment and tension of paper tape and supply of tape on reels. Install new tape when needed.

25765225 PM PREVENT

Check prewound mechanisms.

Rewind if necessary.

25765224 PM PREVENT Clean recording devices.

25765223 PM PREVENT

This procedure is to be accomplished once weekly during the daily test and inspection required in Guide No. F-

15C.

25765222 PM PREVENT Review manufacturer's instructions.

25765221 PM PREVENT

PM-TX0130ZZ-ALM-F16A-1, Fire

Detection and Alarm System

25765192 PM PREVENT

Affix permanent record on extinguisher with year of hydrostatic

25765191 PM PREVENT

Recharge extinguisher according to manufacturer's instructions.

25765190 PM PREVENT

Weigh replacement cartridge to insure that it is full of gas.

25765189 PM PREVENT 150 degrees F.

25765188 PM PREVENT

All dry chemical and dry powder extinguishers must have all traces of water removed from extinguishing agent, shell, hose and nozzle. A heated air stream is recommended with its temperature not exceeding

25765187 PM PREVENT

Observe shell and gauge for any distortion or leakage.

25765186 PM PREVENT

Secure shell in protective cage and apply proper test pressure. Pressure to be applied at rate so test pressure is reached within one minute. Type of

Extinguisher Hydrostatic Test

Pressure Carbon dioxide 5/3 the service pressure

25765185 PM PREVENT

Fill with water and connect the test pump.

25765184 PM PREVENT

Insert plug into shell opening.

(External cartridge type extinguishers only).

25765183 PM PREVENT

Dismantle and remove all traces of extinguishing agent (dry chemical or dry powder), from inside of shell and hose assembly.

25765182 PM PREVENT

Operate stored pressure and cartridge type extinguisher and check performance.

25765181 PM PREVENT

Any cylinders that have been repaired by soldering or welding, damaged, corroded, burned, or had calcium chloride type of extinguishing agent used in stainless steel extinguisher shall not be hydrostatically tested but destroyed.

25765180 PM PREVENT

Hydrostatic testing of extinguishers requires experienced personnel and suitable testing equipment.

25765179 PM PREVENT

25765178 PM PREVENT

Testing should be in accordance with

NFPA Standard No.

25765177 PM PREVENT

Dry chemical extinguishers, with the exception of ones with stainless steel shells (5 year) should be tested on a

1year basis.

25765176 PM PREVENT

Soda acid, carbon dioxide, and foam extinguishers should be tested on a 5 year basis.

25765175 PM PREVENT

PM-TX0130ZZ-FEX-F24A-1, Fire

Extinguishers

25764814 PM PREVENT Lubricate the stem and lever pivot.

25764812 PM PREVENT Clean the valve body.

25764810 PM PREVENT

Check that the discharge piping support is tight and not causing stress on the valve.

25764808 PM PREVENT

Inspect support brackets and tighten as required.

25764806 PM PREVENT

Inspect and hand lift the manual lifting lever, checking for binding of the stem or seat. Note that valve returns to proper position when the lever is released.

25764804 PM PREVENT

Inspect condition of spring, flanges, and threaded connections.

25764802 PM PREVENT

Check with foreman and operating personnel before performing this test.

25764800 PM PREVENT

The safety relief valves are designed to be operated by system pressure and should only be tested when sufficient pressure exists to clear the seating area of any debris.

25764797 PM PREVENT PM-TX0130ZZ-VLV-V02A-1, Valves

25764756 PM PREVENT Clean up work area.

25764755 PM PREVENT Test.

25764754 PM PREVENT Clean exterior of unit.

25764753 PM PREVENT Check mounting supports.

25764752 PM PREVENT

Lubricate wheels and pivot points as required.

25764751 PM PREVENT Replace removed access panels.

25764750 PM PREVENT

Clean and check operation of color slides.

25764749 PM PREVENT Clean housing interior.

25764748 PM PREVENT

Check bulb and socket, clean or change as required.

25764747 PM PREVENT

Lubricate and check operation of all slide rods, adjust rods and linkage.

25764746 PM PREVENT Clean lens and reflector.

25764745 PM PREVENT

Check connection at, and operation of switch. Lubricate as needed.

25764744 PM PREVENT Remove necessary access panels.

25764743 PM PREVENT

Check power supply cord and connections to plug.

25764742 PM PREVENT FREQUENCY: Monthly

25764741 PM PREVENT

Obtain and review manufacturer's instructions and precautions.

25764740 PM PREVENT

Keep record of hour usage of spotlight bulb, noting its estimated life and date of installation.

25764739 PM PREVENT Special Instructions:

25764738 PM PREVENT

This PM guide applies to both fixed and portable spotlights used in the lighting and highlighting of performers and stage areas in auditoriums and large conference rooms.

25764737 PM PREVENT Application:

25764736 PM PREVENT SPOTLIGHT, FIXED OR PORTABLE

25764735 PM PREVENT L-08

25764734 PM PREVENT d. Inspect cables for deterioration.

25764733 PM PREVENT

c. Clean terminals and tighten connections.

25764732 PM PREVENT

b. Wipe accumulated dirt from battery and dispose of rag.

25764731 PM PREVENT

a. Check electrolyte level and add distilled water as required to bring to proper level.

25764730 PM PREVENT Batteries.

25764729 PM PREVENT

f. Check wiring and shunts for cracked or broken insulation or loose connections.

25764728 PM PREVENT

e. Inspect and clean interlocks and lightly lubricate friction points.

25764727 PM PREVENT

d. Inspect contactor/switch arc chutes for cracks or pitting and clean.

25764726 PM PREVENT

c. Inspect contacts for arcing or improper contacting and clean if required.

25764725 PM PREVENT

b. Check operation and condition of relays, switches, capacitors, resistors, overloads, wiring, connections, and fuses.

25764724 PM PREVENT

a. Clean interior of unit with blow or vacuum.

25764723 PM PREVENT Controllers.

25764722 PM PREVENT c. Lubricate drive motor and gears.

25764721 PM PREVENT

b. Clean end bells, commutators, windings, and brush rigging. Check brush wear and tension in accordance with manufacturer's instructions.

25764720 PM PREVENT

a. Check oil level and oil pickup. Add or replace as required. Review the

Material Safety Data Sheets (MSDS) for proper disposal of used oil. If appropriate, recycle oil at an authorized station. Contact the

Regional S&EM office if you have any quest

25764719 PM PREVENT

Review manufacturer's instructions.

Checkpoints: 1. Motors and generators.

25764718 PM PREVENT Special Instructions:

25764717 PM PREVENT FREQUENCY: Semiannual

25764716 PM PREVENT

LOCOMOTIVE, DIESEL,

ELECTRICAL CONTROLS

25764715 PM PREVENT L-07

25764714 PM PREVENT e. Remove and clean fuel injectors.

25764713 PM PREVENT

d. Check tension and condition of all belts. Adjust or replace as necessary.

25764712 PM PREVENT

c. Inspect cooling system for leaks and test antifreeze solution.

25764711 PM PREVENT

b. Change engine oil and oil filter.

Perform lube at all lubrication points.

Review the Material Safety Data

Sheets (MSDS) for proper disposal of used oil. If appropriate, recycle oil at an authorized station. Contact the

Regional S&EM office if you

25764710 PM PREVENT a. Change fuel and air filters.

25764709 PM PREVENT Diesel engine:

25764708 PM PREVENT

Air compressor - refer to A-04 air compressor guide card.

25764706 PM PREVENT

Check all air cocks for leaks, holding, and smooth operation.

25764704 PM PREVENT

Inspect all pneumatic lines, hoses, and connections for leaks and deterioration.

25764703 PM PREVENT

Check packing in stuffing box and add or replace as required.

25764701 PM PREVENT

Inspect wheels for wear and lubricate bearings.

25764699 PM PREVENT

Check condition of brake shoes, brake hangers, brake rods, pins, linkage, and clevis. Check alignment of brake hanger and lubricate friction and pivot points.

25764697 PM PREVENT

Review manufacturer's instructions.

Checkpoints: 1. Inspect coupler, yoke, keys, and bumper for wear and condition. Lubricate pivot points.

25764695 PM PREVENT Special Instructions:

25764693 PM PREVENT FREQUENCY: Semiannual

25764691 PM PREVENT LOCOMOTIVE, DIESEL ENGINE

25764689 PM PREVENT L-06

25764687 PM PREVENT

Clean up work area on lawn, remove any…