MCC SCHEDULE 5-6-22.xlsx

This is an electrical equipment schedule document that inventories motor control center (MCC) loads and configurations across multiple buildings at a VA facility. The spreadsheet details four separate MCCs distributed across Buildings 1D, 8, and 12, with specific information on each unit's voltage rating (480V), amperage capacity (ranging from 400-600 amps), manufacturer (Siemens, Westinghouse, or Cutler-Hammer), location within the facility, and the connected electrical loads by disconnect switch position. The Building 1D MCCs (BEMCC1, 1EMCC2, 1MCC2, and 2EMCC-1) service various HVAC loads including air handling units, exhaust fans, compressors, and cooling tower systems. Building 8's MCCA (Siemens, 400 amps) controls boiler equipment, condensing pumps, and related heating systems. Building 12's BEMCC (Cutler-Hammer, 600 amps) primarily feeds water and medical air/vacuum systems for the facility.

This baseline electrical panel schedule serves as reference documentation for the Building 12 Pump Power Relocation project (Solicitation 36C26126R0050) issued by the VA Sierra Nevada Health Care System. The MCC schedule is incorporated as Attachment 2 in Amendment 0001 and establishes the existing electrical infrastructure parameters for contractors bidding on the project. The solicitation, set aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB), requires relocation of pump power onto the existing Building 12 MCC and installation of a manual transfer switch to provide emergency power capability. Contractors must use this schedule as the baseline for post-award panel updates, red-line modifications, and one-line diagram revisions required under the Statement of Work Section 4.