36C25218B0066-00002001.pdf

Milwaukee VAMC 02-01-15 695-17-108 Install EMS in Building 102 Milwaukee, WI 53295

ACCOMPANYING AMENDMENT – 36C25218B0066 00002

SECTION 09 06 00

SCHEDULE FOR FINISHES

PART I – GENERAL

1.1 DESCRIPTION

This section contains a coordinated system in which requirements for materials specified in other sections shown are identified by abbreviated material names and finish codes in the room finish schedule or shown for other locations.

1.2 MANUFACTURERS

Manufacturer’s trade names and numbers used herein are only to identify colors, finishes, textures and patterns. Products of other manufacturer’s equivalent to colors, finishes, textures and patterns of manufacturers listed that meet requirements of technical specifications will be acceptable upon approval in writing by contracting officer for finish requirements.

1.3 SUBMITALS

Submit in accordance with SECTION 01 33 23, SHOP DRAWINGS, PRODUCT

DATA, AND SAMPLES provide quadruplicate samples for color approval of materials and finishes specified in this section.

1.4 APPLICABLE PUBLICATIONS

A. Publications listed below form a part of this specification to the extent referenced. Publications are referenced in text by basic designation only.

B. MASTER PAINTING INSTITUTE: (MPI)

2001....................Architectural Painting Specification Manual

Milwaukee, WI 53295

ACCOMPANYING AMENDMENT – 36C25218B0066 00002

PART 2- PRODUCTS2.5 DIVISION 05 – METALS

A. SECTION 05 12 00, STRUCTURAL STEEL FRAMING

Finish Color

Painted Match existing adjacent

B. SECTION 05 31 00, STRUCTURAL STEEL DECKING

Finish Color

Painted Match existing adjacent

A. SECTION 05 50 00, METAL FABRICATIONS (equipment framing)

Finish Color

Painted White

2.7 DIVISION 07 - THERMAL AND MOISTURE PROTECTION

A. SETION 07 53 23, ETHYLENE-PROPYLENE-DIENE-MONOMER ROOFING

Color Manufacturer SRI

White As per specifications > 70

B. SECTION 07 53 23, ETHYLENE-PROPYLENE-DIENE-MONOMER ROOFING

Item Finish Color

Existing Roofing Painted White

C. SECTION 07 60 00, FLASHING AND SHEET METAL

Item Material Finish

Flashing Stainless steel Factory

Aluminum

D. SECTION 07 72 00, ROOF ACCESSORIES

Item Material Finish

Equipment Support Galv. Steel Paint

2.8 DIVISION 08 – OPENINGS

A. SECTION 08 31 13, ACCESS DOORS AND FRAMES

Milwaukee, WI 53295

ACCOMPANYING AMENDMENT – 36C25218B0066 00002

A. SECTION 08 90 00, LOUVERS AND VENTS

2.9 DIVISION 09 - FINISHES

T. SECTION 09 91 00, PAINT AND COATINGS

1. MPI Gloss and Sheen Standards Gloss @60 Sheen @85

Gloss Level 1 a traditional matte finish-flat max 5 units max 10 units

Gloss Level 3 a traditional “egg-shell like” finish 10-25 units 10-35 units

PART III EXECUTION

3.1 NOT USED

--- E N D---

Factory Color

Galvanized Steel

Material Finish

Aluminum Anodized