Question 19 npodgfxform.pdf
PDF 2 MB Posted
- Solicitation number
- 36C24521B0011
About this file
This federal solicitation seeks a construction contractor to renovate and expand a 47-bed domiciliary building at a Department of Veterans Affairs medical center. The project includes a complete renovation of an existing 17,600 square foot domiciliary building that is 30 years old, replacement of the HVAC system, updated finishes and floor plan changes. A 5,000 square foot addition will be constructed to increase occupancy. Asbestos abatement is also required. The estimated construction cost range is $5 million to $10 million. The solicitation is restricted to Service Disabled Veteran Owned Small Businesses. The pre-bid site visit will be held on a date specified in the solicitation. Bids must be submitted by the approximate date of October 13, 2021. Award will be made to the responsive and responsible bidder with the lowest price.
View the file
Other files
Show all 32
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitybrands.com/nLight © 2014-2020 Acuity Brands Lighting, Inc. All rights reserved. Rev. 04/28/20 nPOD GFX nPOD GFX Example: nPOD GFX WH
Series Voltage Color nPOD GFX [blank] 120/277VAC
347 347VAC
WH White IV Ivory GY Gray
AL Almond BK Black
OVERVIEW
The Graphic WallPod (nPOD GFX) provides an elegant and sophisticated user control to any nLight controlled space. Its 3.5”, high resolution touch screen is easy to view and simple to use.
FEATURES
• 3.5” Full-color Touch Screen (Diagonal)
• Provides up to 16 On/Off/Dim Controls
• Provides up to 16 Scene Controls
• Enables User Customization of all Presets and On/Off/Dim Controls
• Enables Programming of Switch Tracking Channels of Devices in Zone
• Mounts to a Single Gang Switch Box
• Front Accessible Micro-USB Connector for Simple Laptop Connectivity
• Optional Password Protection for Controls and Setup Screens
• Customizable Screen Saver Image
• Supported file formats: JPG, PNG, GIF, BMP, TIF
• Optimal resolution: 320x240, 16bit color
• Onboard Help Screens
• Includes PS 150 or PS 150 347 Power Supply
ORDERING INFORMATION
Catalog Number: Date: Project:
nPOD GFX
Warranty Five-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx Note: Actual performance may differ as a result of end-user environment and application.
Specifications subject to change without notice.
Capable This item is an A+ capable component, which has been designed and tested to provide out-of-the-box luminaire compatibility with simple commissioning, when included as part of an A+ Certified™ Solution.
To learn more about A+, visit www.acuitybrands.com/aplus.
http://www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx http://www.acuitybrands.com/aplus
Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitybrands.com/nLight nPOD GFX
OVERVIEW
There are two RJ-45 ports on the rear of the Graphic WallPod for CAT5e connection to other nLight-enabled devices. Additionally, there is a set of power terminals where low voltage power (from the provided PS 150 power supply module) is connected.
The Graphic WallPod flush mounts to a single-gang switch box. The housing has two sliding panels that cover the mounting screws, an indicator LED, a reset button, and a micro-USB style port. This port is provided as a convenient location for which to connect a laptop running the nLight SensorView software. While not needed for setup and configuration of the Graphic WallPod, SensorView is required to perform advanced configuration and firmware upgrades of devices within the Graphic WallPod’s local zone. Remote access and control is available via SensorView if the zone is connected to an nLight backbone with a Gateway. Note: no power is used/supplied from/to the nLight bus.
• Before mounting, connect Class 2 low voltage wires from power supply to power terminal connections (polarity insensitive)
• Verify unit has power by observing screen and/or LED
• Connect CAT-5e cable(s) from local zone of nLight-enabled devices to RJ-45 port(s)
• Unit will begin discovering connected devices (indicated by on-screen message box)
• Mount unit to standard single gang switch box (screws provided)
• To access configuration screens, touch lock icon in upper left. Default password is “1234”
• Pressing reset button twice is equivalent to repowering unit
• Press reset button three times to restart unit in screen-calibration mode
BACK FRONT
RED
BLK
H
PS 150 (347)
WHT
BLK (120 V) / ORN (277 V)
RED (347 V)
N
RE
BL
MICRO-USB
PORT
SCREW HOLES
POWER STATUS LED
RESET BUTTONNLIGHT NETWORK
PORTS (RJ-45)
POWER TERMINALS
Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitybrands.com/nLight nPOD GFX
Electrical Input Ratings 15-24VDC, 60mA, Class 2 (via included PS-150 or PS-150-347 power supply)
Mechanical Dimensions 5.06”H x 3.50”W x 0.69”D (129mm x 89mm x 18mm)
Mounting Single-Gang Box or Low Voltage Ring
Finish Matte Connection Type RJ-45 nLight Network Ports (2)
Low-Voltage Terminal
Environmental Warrantied Operating Temperature 14°F to 140°F (-10°C to 60°C)
Relative Humidity Up to 90%, Non-Condensing Standards/ Ratings RoHS
SPECIFICATIONS
| Catalog Number 4: |
| Date 4: |
| Projects 4: |
| Text Field 2: |
| Text Field 3: |
| Text Field 4: |
File details come from the government source that posted it. Updated .