620-20-206 Firehouse Enhancement - VA Montrose Salient Characteristics FINAL.pdf

LIST OF BRAND NAME OR EQUAL EQUIPMENT

MAKE, MODEL AND SALIENT CHARACTERISTICS

Reference: Drawing AI-201, Drawing AI-503, Spec Section 08 51 13

ITEM: ALUMINUM WINDOWS

VENDOR: KAWNEER

Model: 8430TL ISOLOCK

Salient Characteristics:

Dimensions: as noted on the drawings Heavy Commercial Grade Window – H-HC70/H-AW70 grade 4” Overall Frame Depth .070” Nominal Double insulated glazing with Low E on #2 surface and laminated glass on interior side Aluminum Auto Lock ISOLOCK Thermal Break Bronze Anodized finish Insect Screens Exterior Pannings and Interior Trims and sill for 15 PSF Water performance .30 Air Infiltration @ 6.24, 70 psf design Load, See Glazing Spec for U factor and SHGC Condensation resistance CRF of 49 Sound Transmittance STC of 34 Two Year Manufacturer’s Warranty

All characteristics are for reference purposes only and the VA will consider similar substitutions provided the intent of this project is still met and no federal, state or VA standards are violated.

BIDDING ON: ____________________________________

MANUFACTURER

NAME: ____________________________________

BRAND: ____________________________________

NO.: ____________________________________

Reference: Drawing AI-600, Spec Section 09 51 00

ITEM: ACOUSTICAL CEILING TILE CG

VENDOR: ARMSTRONG

Model: 1754 Fine fissured

Dimensions: 24 “ x 24”X 7/8” Square Edge Medium Texture Class A, 0.85 Light Reflectance, Standard Durability, Recycled Content High,

0.75 NRC, 35 CAC,

Warranty 1 year

BIDDING ON: ____________________________________

Reference: Spec Section 04 72 00

ITEM: THIN BRICK PANEL SYSTEM

VENDOR: GLEN-GERY

Model: THIN TECH CLASSIC

Compliance with water penetration resistance (ASTM E331) Compliance with structural performance (wind load deflection ASTM E330) Compliance with shear bond strength (ASTM C297) Compliance with fastener pull through, fastener withdrawal (ASTM D1037) Compliance with corrosion resistance (salt spray, ASTM B117) Compliance with ASTM C 1088, Grade Exterior Compliance with NFPA 285 20 year manufacturer’s warranty against material defects

BIDDING ON: ____________________________________

Reference: Spec Section 26 51 00

ITEM: 2’ X 2’ LED RECESSED LIGHT FIXTURE TROFFER, WHITE

VENDOR: LITHONIA

Model: 2GTL LED

Salient Characteristics:

22 gauge steel housing 120 volt 3400 lumens 4000K Driver 80 CRI or higher Prismatic lens Long life LEDs with high efficiency drivers. 80% LED lumen maintenance at 72,000 hours CSA certified to meet U.S. and Canadian standards IC rated DesignLights Consortium® (DLC) Premium qualified product.

5 year warranty

BIDDING ON: ____________________________________

ITEM: 1’ X 4’ SUSPENDED LED LIGHT FIXTURE, WHITE

Model: LITHONIA-GRD-106384

Salient Characteristics:

steel housing 120 volt 3500 lumens 4’ chain hanger set modular LED boards and dimming driver — is rated for >60,000 hours (L80) at 25° C ambient temperature.

Prismatic lens Long life LEDs with high efficiency drivers. 80% LED lumen maintenance at 72,000 hours CSA/CUS listed.

LM-79 tested.

Individual sections meet FCC Part 15 requirements.

CSA tested to UL 1598 standards 5 year warranty

ITEM: LED EXIT LIGHTS, WHITE WITH RED LETTERS

Model: EXL/EXR

Salient Characteristics:

120 volt Test switch and status indicator for low maintenance Universal chevrons for directional indication Letters 6" high with 3/4" stroke, with 100 ft viewing distance rating, based on UL924 standards.

Life of LED lamps rated for 10 years UL Listed.

Meets UL 924, NFPA 101, NFPA 70‐NEC and OSHA illumination standards.

Indoor damp location 50° to 104°F (10°C to 40°C) listed standard.

2 year warranty

Reference: Spec Section 08 71 00

ITEM: LOCKSETS

VENDOR: CORBWIN RUSSWIN

Model: ML 2020-lwn-626, ML 2059, ML 2065, etc…

Mortise Lockset - Heavy Duty Grade 1 1” Stainless steel deadbolt 10 year warranty Heavy Gauge Steel Quick Reversible Feature Warranty of 15 years for silver spoilage

BIDDING ON: ____________________________________