36A79719Q0008-049.pdf

Qt Item Description

1 SOMATOM Force The all new SOMATOM Force contains two new Vectron X-ray tubes with unprecedented 2 x 1.300 mA tube current at 2 x 120 kW generator power. The new Stellar Infinity detector, including TrueSignal and Edge Technology providing increased in plane resolution (1.840 channels) and ~ 50% increased z-coverage, compared to SOMATOM Definition Flash. SOMATOM Force takes CT imaging where it has never gone before by routinely generating ultra-thin 0.5 mm slices e.g. for most accurate stenosis, plaque and stent analysis and for low-kV imaging without compromises, even in adults or obese patients at scan speeds up to 737 mm/s (opt.). Additionally, the all new measurement system sets the benchmark in low contrast detectability. An object size of 2 mm, at a contrast difference of 3 HU, with a CTDIvol (Ø 32 cm) of only 12.3 mGy (with Phantom CATPHan (20 cm)) can be detected.

The all new SOMATOM Force gantry, with its powerful hollow shaft motor achieves maximum rotation speeds of up to 0.25 seconds (optional) resulting in down to 66 ms, heart rate independent temporal resolution to freeze motion.

It features the all new Turbo Flash mode, with a dynamic Field of View (FoV) of up to 50 cm, even in ultra-high pitch applications (737 mm/s table speeds, Opt.).

Besides, it enables reduction in dose, while it improves overall image quality (both high- and low-contrast resolution) for all scans, resulting, e.g. in dose down to sub-mSv for cardiac imaging and below. In its third generation, Dual Energy with Selective Photon Shield II (~ 30% better energy separation, for more precise Dual Energy quantification), automatically provides a second contrast for the best possible diagnosis without any extra dose at a Dual Energy Field of View (FoV) of up to 35 cm at scan speeds up to 285 mm/s (opt.).

1 ELEVATE R Definition Flash>Force ELEVATE from SOMATOM Definition Flash to SOMATOM Force

1 CT Acute Care Engine - Scan Opt The CT Acute Care Engine Scan Options provide the following:

- Extended FoV of 78 cm for obese patient imaging

- HeartView, including

- Prospectively triggered high-pitch Turbo Flash Spiral, e.g. for sub-mSv cardiac scanning

- ECG-Gated Spiral for high and irregular heart rates

- Cardio Sequence for moderate heart rates

- 0.25 s rotation time to freeze any motion (e.g. cardiac motion)

- MinDose ECG Pulsing dose saving in cardiac function

SHIP TO:

WAREHOUSE

V.A. Medical Center

VA MEDICAL CENTER

3900 LOCH RAVEN BLVD

BALTIMORE, MD 21218

REQUISITION: 512-B81003

Qty Item Description

- Edge Technology for 0.30 mm spatial resolution

- Cardio BestPhase Plus for optimal cardiac phase selection

1 CT Acute Care Engine Pro - Scan Opt

The CT Acute Care Engine Pro Scan Options include the following:

- Adaptive 4D Spiral acquisition for whole organ perfusion

- UHR with extra wide comb for high isotropic resolution

- Tiltable (adjustable) head holder for optimal positioning of stroke patients

1 Standard rear cover

Standard CT gantry back cover, without gantry panel control units.

1 Ring Light

SOMATOM Force offers a gantry ring mood light (LED) in different, preset, adjustable colors that are synchronized with the gantry funnel light. They help creating a relaxing atmosphere for your patients, making a SOMATOM Force examination even more exciting and memorable.

1 Tunnel Light

SOMATOM Force offers a funnel mood light (LED) in different, preset, adjustable colors that are synchronized with the gantry ring light. It makes the gantry bore appearing wider thus making it easier for patients with claustrophobia to undergo their examination.

1 Patient Table

The table is especially designed for 200 cm scan range and ultra-fast spiral scanning (up to 737 mm/s with HeartView in Turbo Flash spiral). The included Physiological Measurement Module allows connecting a 3 channel ECG cable (included) for ECG controlled cardiac acquisition.

1 Mat for Patient Table

For the comfortable positioning of the patient on the CT table.

1 Cooling System Water/Air #split

Water-to-air heat exchanger for the dissipation (to the air outside) of heat, generated in the gantry.

1 Service Switch

Service switch to shut off the outdoor cooling unit for maintenance or in case of emergency

1 Trafo for cooling system water/air

For adequate power consumption the chiller system may need an additional transformer: If the electrical connection to be used can not provide either 400V at 50Hz or 460V at 60Hz this transformer is needed.

1 CARE Child

Dedicated pediatric CT imaging, including 70 kV scan modes and specific CARE Dose4D curves and protocols

1 FAST CARE Platform

Siemens' unique FAST CARE platform is set to raise the standard of patient-centric productivity. Utilizing FAST - Fully Assisting Scanner Technologies - typically time-consuming and complex procedures during the scan process are extremely simplified and automated, not only improving workflow efficiency, but optimizing the clinical outcome by creating reproducible results, making diagnosis more reliable and reducing patient burden through streamlined examinations. Siemens' desire for as little radiation exposure as possible lies at the heart of the CARE - Combined Applications to Reduce Exposure - research and development philosophy offering a unique portfolio of dose saving features, many of them being introduced as industry's first.

1 FAST Planning #AWP

Direct, organ-based setting of scan and recon ranges for a faster and more standardized workflow.

1 DoseMAP

DoseMAP - Siemens CT Dose Management Program - creates transparency in dose values and makes it possible to assess the dose situation. It improves security by setting dose alerts. DoseMAP has three components for complete and comprehensive dose management: Report, Analyze, and Protect.

1 ADMIRE

ADMIRE (Advanced Modeled Iterative REconstruction) is the next generation of Iterative Reconstruction. ADMIRE offers on the fly powerful dose reduction, excellent image quality and everyday suitability. Other unique qualities of ADMIRE are: Superb details, Positive impact on the reconstructed image quality in comparison to SAFIRE, Reader-ready reconstructions deliver the desired image impression on the fly. Due to the computer power of the new Image Reconstruction System (IRS), ADMIRE has a potential to lower radiation, and to offer a routine-ready performance.

1 FAST Spine #AWP

Accurate and anatomically aligned preparation of spine recons with just a single click.

1 FAST 3D Align

FAST 3D Align enables automated alignment of FOV, adjustments and reconstructions of standard views.

1 FAST DE (DE WorkStream 4D)

FAST Dual Energy (DE) is a 4D workflow for the Dual Energy data with direct generation of axial, sagittal, coronal, or double-oblique images from standard Dual Energy scanning protocols. The Advantage: the elimination of time consuming, error prone, manual reconstruction steps and a reduction of data volume up to a factor of 10, since virtually all diagnostic information is captured in 3D slices.

1 syngo Dual Energy Scan with SPS II

The syngo Dual Energy Scan with SPS II (Selective Photon Shield II) option allows the use of both SOMATOM Force X-ray sources simultaneously at different energies, while the Selective Photon Shield II reduces dose and at the same time increases energy separation by blocking unnecessary parts of the energy spectrum. syngo Dual Energy offers the possibility to acquire two spiral data sets simultaneously from a single scan running the tubes at 80/140 kV, 100/140 kV and newly with 80/150 kV (for obese Dual Energy imaging). The results are two data sets with diverse information.

1 syngo Security Package

Security package for general regulatory security rules

1 Patient Restraint 400 mm

400 mm wide restraint strap for the safe positioning of even obese patients on the patient table.

1 Computer Desk, height adjust 110V

The height adjustable table (710 mm to 1100 mm) supports optimal ergonomic working positions at the CT consoles. It allows users to switch between the dynamism of a standing desk and the comfort of a traditional desk.

1 Computer Cabinet

New cabinet to accommodate the computer system and UPS. Matched to the design of the control console table.

Width: 800 mm, Depth: 800 mm, Height: 720 mm

1 CT Project Management

A Siemens Project Manager (PM) will be the single point of contact for the implementation of your Siemen's equipment. The assigned PM will work with the customer's facilities management, architect or building contractor to assist you in ensuring that your site is ready for installation. Your PM will provide initial and final drawings and will coordinate the scheduling of the equipment, installation, and rigging, as well as the initiation of on-site clinical education.

1 CT Standard Rigging and Installation

This quotation includes standard rigging and installation of your CT new system.

Standard rigging into a room with reasonable access, as determined by Siemens Project Management, during standard working hours (Mon. - Fri./ 8 a.m. to 5 p.m.)

It remains the responsibility of the Customer to prepare the room in accordance with the SIEMENS planning documents.

Any special rigging requirements (Crane, stairs, etc.) and/or special site requirements (e.g. removal of existing systems, etc.) is an incremental cost and the responsibility of the Customer.

All other "out of scope" charges (not covered by the standard rigging and installation) will be identified during the site assessment and remain the responsibility of the Customer.

1 Initial onsite training 32 hrs

Up to (32) hours of on-site clinical education training, scheduled consecutively (Monday - Friday) during standard business hours for a maximum of (4) imaging professionals. Training will cover agenda items on the ASRT approved checklist. Uptime Clinical Education phone support is provided during the warranty period for specified posted hours. This educational offering must be completed (12) months from install end date. If training is not completed within the applicable time period, Siemens obligation to provide the training will expire without refund.

1 Initial onsite training 32 hrs GovOffset

1 Additional onsite training 32 hours

Up to (32) hours of on-site clinical education training, scheduled consecutively (Monday - Friday) during standard business hours for a maximum of (4) imaging professionals. Training will cover agenda items on the ASRT approved checklist if applicable. This educational offering must be completed (12) months from install end date. If training is not completed within the applicable time period, Siemens obligation to provide the training will expire without refund.

1 Additional onsite training 32 hours

Up to (32) hours of on-site clinical education training, scheduled consecutively (Monday - Friday) during standard business hours for a maximum of (4) imaging professionals. Training will cover agenda items on the ASRT approved checklist if applicable. This educational offering must be completed (12) months from install end date. If training is not completed within the applicable time period, Siemens obligation to provide the training will expire without refund.

1 Govt. Training Class (T&L not included)

Tuition for (1) government attendee to attend a Classroom Course of choice at one of the Siemens training centers.

This educational offering must be completed (12) months from install end date. If training is not completed within the applicable time period, Siemens obligation to provide the training will expire without refund.

1 Dual Energy Workshop NO T&L

This workshop tuition for (1) attendee includes didactic lectures on physics, patient selection, scanning and protocols, post processing data sets, and interpretations. Travel and Lodging are NOT INCLUDED. Workshop must be scheduled consecutively (Monday - Friday) during standard business hours. This educational offering must be completed by the later of (12) months from purchase or install end date. If training is not completed within the applicable time period, Siemens obligation to provide the training will expire without refund.

1 teamplay Welcome & Registration Package teamplay is a cloud-based network that brings together your imaging modality users, the systems' dose and utilization data, and the users' expertise to help you improve the delivery of care to your patients. Basic features are provided free of charge. Premium features (benchmarking, non-Siemens devices) are provided on a trial basis for three months at no charge, and may be used thereafter on a subscription fee basis.

To register: http://teamplay.siemens.com/#/institutionRegistration/1

1 Riedel Chiller Start-up by SBT

1 Surge Protective Device (SPD)

1 Stellant D Dual Ceiling w/Certegra WS

New Stellant D Dual Ceiling mounted with Certegra Workstation NO Informatics. Short ceiling post - 580 mm.

Other ceiling post lengths are available (different part numbers): 850 mm and 1000 mm.

Includes Stellant D, Dual Head, ceiling mounted injector; Certegra workstation; installation and warranty through Medrad.

1 CT Slicker

Thermoseal seams and flaps deflect fluids, reducing contaminant penetration into the cushion and table.

Contaminants are retained on the tabletop or shunted to the floor. Cleanup is faster, more thorough, and contaminant build-up is reduced.

Built using heavy, clear, micro matte vinyl, and top grade hook and loop fastening strips (Velcro) to better fit the specified table. Custom vinyl resists tears and minimizes radiologic interference. Latex free. Set includes CT Skirts.

Shipped with main cover, a catheter bag holder, and 3 restraining belts unless otherwise noted.

Includes warranty from RADSCAN Medical.

1 Low Contrast CT Phantom & Holder

1 Standard UPS for Force

The standard partial system uninterruptible power system (UPS) is built directly into the power distribution cabinet (PDC) and supports the critical circuits for table and gantry electronics, console computer, image reconstruction system, and the internal Ethernet switch (to ensure connectivity). This enables safe removal of patient if outage occurs during scanning.

The UPS allows for a safe shutdown of the CT scanner in the event of power interruption. The UPS provides 5-7 minutes of power, during which the user is prompted and guided through the process to perform a safe shutdown of the system. This safe shutdown ensures that no data is lost.

1 Access Protection

Scan Protocols are password protected allowing only authorized staff members to access and permanently change protocols

1 Adaptive Dose Shield

Adaptive Dose Shield for spiral acquisition to eliminate pre- and post-spiral over-radiation.

1 CARE Analytics

Stand-alone tool, for installation in any PC in the hospital network, allowing evaluation of DICOM dose Structured Reports (DICOM SR)

1 CARE Dashboard

Visualization of activated dose reduction features and technologies for each scan range of an examination to analyze and manage the dose to be applied in the scan

1 CARE Dose4D

CARE Dose4D delivers the highest possible image quality at the lowest possible dose for patients - maximum detail, minimum dose. Adaptive dose modulation for up to 60% dose reduction

1 CARE Dose Configurator

CARE Dose Configurator: Enhancement of Siemens' renowned real-time dose modulation CARE Dose4D, introducing new reference curves for each body region and for each body habitus allowing to adjust the configuration even more precisely to the patient's anatomy.

1 CARE kV

CARE kV: First automated, organ-sensitive voltage setting to improve image quality and contrast-to-noise-ratio while optimizing dose and potentially reducing it by up to 60%.

1 CARE Profile

CARE Profile: Visualization of the dose distribution along the topogram prior to the scan

1 DICOM SR Dose Reports

DICOM structured file allows for the extraction of dose values (CDTIvol, DLP)

1 DoseLogs

Whenever a dose limit exceeds the established reference dose levels (Dose Notification and Dose Alert) a report is automatically created on the system, enhancing your ability to track radiation dose.

1 Dose Alert

Dose Alert: Dose Alert automatically adds CTDIvol and DLP values depending on z-position (scan axis). The Dose Alert window appears, if either of these cumulative values exceeds a user-defined threshold.

1 Dose Notification

Dose Notification: Dose Notification provides the ability to set dose reference values (CTDIvol, DLP) for each scan range. If these reference values are exceeded the Dose Notification window informs the user.

1 FAST Adjust

FAST Adjust: assists the user to handle system settings in a fast and easy way by automatically solving of conflicts within user defined limits by one single click on the FAST Adjust button. The limits for scan time and tube current per scan are defined via the Scan Protocol Assistant. FAST Adjust offers an undo functionality to return to previously set values.

1 FAST Scan Assistant

FAST Scan Assistant: An intuitive user interface for solving conflicts by changing the scan time, resp. the pitch and/or the maximum tube current manually.

1 NEMA_XR-29 Standard

This system is in compliance with NEMA XR-29 Standard Attributes on CT Equipment Related to Dose Optimization and Management, also known as Smart Dose.

1 SureView

Provides exceptional image quality at any pitch setting, enabling you to scan faster because you can scan at any pitch without degrading image quality

1 UFC Detector

Ultra Fast Ceramics (UFC) technology is a unique type of scintillation technology material that quickly and efficiently transforms radiation from the X-ray tube into light signals. Its superb overall quantum efficiency and unique short afterglow enable time-critical X-ray detection at low doses and extremely fast data collection.

1 Neuro BestContrast

The Neuro BestContrast algorithm can provide enhanced tissue contrast, resulting in improved contrast between gray and white matter without increasing image noise. This post processing step is rapid and can be easily incorporated into clinical workflow where it can be used with other dose reduction approaches such as iterative reconstruction.

1 Additional Rigging CT

AMMHINWARDM

Sticky Note None set by AMMHINWARDM

AMMHINWARDM

Sticky Note MigrationNone set by AMMHINWARDM

AMMHINWARDM

Sticky Note Unmarked set by AMMHINWARDM

AMMHINWARDM

Sticky Note None set by AMMHINWARDM

AMMHINWARDM

Sticky Note MigrationNone set by AMMHINWARDM

AMMHINWARDM

Sticky Note Unmarked set by AMMHINWARDM

AMMHINWARDM

Sticky Note None set by AMMHINWARDM

AMMHINWARDM

Sticky Note MigrationNone set by AMMHINWARDM

AMMHINWARDM

Unmarked set by AMMHINWARDM

OPTIONS

OPTIONS

OPTIONS:

1 Heart Perfusion Scanning

Dynamic scan mode to visualize ventricular myocardial perfusion for identification of perfusion defects. Applies sequential technique for minimum dose and 66 ms temporal resolution for scanning even at high heart rates.

AMMHINWARDM

None set by AMMHINWARDM

AMMHINWARDM

Sticky Note MigrationNone set by AMMHINWARDM

AMMHINWARDM

Unmarked set by AMMHINWARDM