3-File O- PERFORMANCE OF SPECIALTY TRADE WORK.pdf
PDF 145 KB Posted
- Attached to
- BID #2026-049A-W/S OCEAN ACRES BOOSTER PUMP REPLACEMENT PHASE 2 AND WELL NO. 5 REDEVELOPMENT
- Solicitation number
- BID #2026-049A-W/S
- Issued by
- Ocean County, New Jersey
About this file
This is an instructions document for bidders submitting proposals to the Township of Stafford, New Jersey, for BID #2026-049A-W/S regarding the Ocean Acres Booster Pump Replacement Phase 2 and Well No. 5 Redevelopment project. The work scope requires furnishing all labor, materials, equipment, tools, and supervision to rehabilitate existing Well No. 5 and replace two existing high service booster pumps with associated motor rehabilitation. The high service pumps are located at 327 Golfview Drive, Manahawkin, New Jersey, 08050, while Well No. 5 is located at 181 Stafford Avenue, Manahawkin, New Jersey, 08050. All well rehabilitation work must be performed under the direct supervision of a New Jersey Licensed Master Well Driller in accordance with all applicable New Jersey Department of Environmental Protection requirements.
Bidders who intend to act as general contractors must complete a specialty trade work form disclosing qualifications for performing plumbing and gas fitting work, steam power plants and heating/ventilating apparatus work, electrical work, and/or structural steel and ornamental iron work, as applicable to the contract. General contractors may satisfy these requirements through subcontractors, their own employees, or the bidder himself, and must provide the name and license number where required for each individual performing specialty trade work. The completed form must be submitted with the general contractor's bid, with "NONE" inserted for any specialty trade categories not applicable to the contract.
View the file
Other files
Show all 25
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
INSTRUCTIONS TO BIDDERS – PERFORMANCE OF SPECIALTY TRADE WORK
In the event a general contractor will be required to furnish (1) plumbing and gas fitting and kindred work; (2) steam power plants, steam and hot water heating and ventilating apparatus and kindred work; (3) electrical work; and/or (4) structural steel and ornamental iron work, the general contractor must complete all of the sections on the following form in order to provide the required information demonstrating that either its subcontractors, its own employees or the bidder himself possess the necessary or required qualifications to perform work in each appropriate specialty trade category applicable to the contract. If the contract does not involve any of the specialty trade categories, insert the word “NONE” in each appropriate space provided. The completed form must be submitted with the general contractor’s bid.
A general contractor that intends to utilize a specific subcontractor to perform work in one or more of the specialty trade categories set forth on the following form shall provide the required information with regard to that subcontractor in the appropriate spaces for each specialty trade category applicable to the contract.
A general contractor that intends to perform work in one or more of the specialty trade categories set forth on the following form through the use of its own employees or the general contractor himself rather than through utilization of a subcontractor shall write the word “In-House” next to each applicable category and then insert the name, and the license number where required, of each such employee of the general contractor or the general contractor himself in the appropriate spaces for each specialty trade category applicable to the contract.
File details come from the government source that posted it. Updated .