28523ExhibitB-1Specifications.docx
DOCX document 309 KB Posted
- Attached to
- Forklifts
- Solicitation number
- 28523
- Issued by
- Adams County, Asotin County, Benton County, Chelan County, Clallam County, Clark County, Columbia County, Cowlitz County, Douglas County, Ferry County, Franklin County, Garfield County, Grant County, Grays Harbor County, Island County, Jefferson County, King County, Kitsap County, Kittitas County, Klickitat County, Lewis County, Lincoln County, Mason County, Okanogan County, Pacific County, Pend Oreille County, Pierce County, San Juan County, Skagit County, Skamania County, Snohomish County, Spokane County, Stevens County, Thurston County, Wahkiakum County, Walla Walla County, Whatcom County, Whitman County, Yakima County, Asotin City, Clarkston City, Clarkston Heights-Vineland CDP, West Clarkston-Highland CDP, Benton City, Chelan City, Chelan Falls CDP, Clallam Bay CDP, Lewisville CDP, Rock Island City, Pacific Beach CDP, Whidbey Island Station CDP, Mercer Island City, Pacific City, Bainbridge Island City, Kingston CDP, Kitsap Lake CDP, Kittitas City, Klickitat CDP, Okanogan City, Anderson Island CDP, Fort Lewis CDP, Fox Island CDP, Herron Island CDP, Ketron Island CDP, North Fort Lewis CDP, Raft Island CDP, Stevenson City, Hat Island CDP, Lake Stevens City, Snohomish City, Spokane City, Spokane Valley City, Puget Island CDP, Garfield Town, Yakima City, Washington
About this file
This is a specifications document (Exhibit B-1) for a forklift solicitation covering Washington and Oregon states. The document outlines detailed specifications for nine categories of forklifts: Electric Motor Rider, Electric Motor Narrow Aisle, Electric Motor Narrow Aisle Walkie, Electric Motor Hand, Internal Combustion Engine Cushion Tire, Internal Combustion Engine Pneumatic Tire, Heavy Duty Internal Combustion Engine Pneumatic Tire, Rough Terrain, and Telehandler forklifts. The specifications include requirements for preventative maintenance services for both electric and LPG-powered equipment, with bidders required to provide maintenance twice annually at least 120 days apart. Vendors must provide repair services within two business days of callout, prepare work reports within 15 days, and include operator training and manuals with deliveries.
The document includes pass/fail specifications that are mandatory minimum requirements for all categories, with detailed technical specifications for each forklift type including capacity, power source, mast specifications, dimensions, and required safety features. Bidders must respond to all specifications in their chosen categories, with any "No" responses resulting in disqualification. The document requires vendors to use the DES Contract Automobile Request System (CARS) for orders, with 5-day response requirements for order acknowledgment and information updates. No pricing information or set-aside requirements are included in this specifications document.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 28523CompetitiveSolicitation.docx | DOCX document | |
| 28523ExhibitB-2PerformanceRequirements.docx | DOCX document | |
| 28523ExhibitCPriceSheet.xlsx | XLSX spreadsheet | |
| 285231stAmendment.docx | DOCX document | |
| 28523ExhibitB-1SpecificationsAmended.docx | DOCX document | |
| 28523ExhibitA-1BidderCertifications.docx | DOCX document | |
| 28523WA-ORCoopPurchasingAgreement.docx | DOCX document | |
| 28523PreBid.pdf | ||
| 28523CompetitiveSolicitationAmended.docx | DOCX document | |
| 28523QA1.pdf | ||
| 28523ExhibitA-2BidderProfile.docx | DOCX document | |
| 28523QA1.docx | DOCX document |
Show all 12
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
EXHIBIT B-1 – SPECIFICATIONS
| Competitive Solicitation: |
| 28523 Forklifts |
| Bidder: |
| _________________________________ |
Type/print the full legal name of bidder company
Instructions:
Note: Bidder must follow the instructions set forth in this Exhibit. Unless Enterprise Services, in its discretion, determines that a bidder’s variance from these instructions is immaterial or timely corrected, Bids that do NOT follow these instructions may be deemed to be nonresponsive and rejected. Do not alter the format or specification definitions of this exhibit. Such alterations may cause a bid to be deemed non-responsive.
1. Add bidder’s business name above and follow the instructions below:
2. Bidder Compliance. Review the specifications set forth below in the table and mark either ‘Yes/No’ in the ‘Bidder Compliance’ column depending upon whether bidder’s products meet or exceed the specification. Bidders must mark a response for each specification. If any specification does not have a response in the Bidder Compliance column, the bid will be considered nonresponsive.
3. Assessment. The returned Bid will be assessed as follows:
a. Pass/Fail Specifications: These specifications are mandatory minimum specifications. Bidder must meet each and all of these specifications. Questions 1-10 are required responses for all categories. If bidder selects ‘No’ for any of these specifications, , the bid will be deemed to be nonresponsive and bidder will be disqualified from further consideration.
b. Category Specifications: Questions 11-19 apply to specific categories of forklifts identified in the header. Respond to the categories that are being bid on. If bidder selects ‘No’ for any of these specifications, the bid will be deemed to be nonresponsive and bidder will be disqualified from further consideration.
4. Supporting Information. Enterprise Services may request additional information or references to help verify the information provided by bidder in this exhibit. A bidder’s failure to provide such requested information to Enterprise Services within five (5) business days may result in disqualification.
5. Submit the exhibit as a Microsoft Word document and without modifying the formatting. Please note this document is size Legal 8.5” x 14” if it needs to be printed.
| REQ ID |
| Specification |
| Assessment |
| Bidder Compliance |
| 1. |
| Warranty/useful life |
Bidder is able to offer a minimum Warranty of 24 months or4000 hours, whichever is first.
| Pass/Fail |
| ☐ Yes |
☐ No
| 2. |
| Preventative Maintenance (PM) Services |
Bidder is able to provide the following Preventative Maintenance Services listed in the following tables:
· Table 1: Minimum Preventative Maintenance, Electric Powered Equipment
· Table 2: Minimum Preventative Maintenance, Liquified Petroleum Gas (LPG) Powered Equipment.
| Pass/Fail |
| ☐ Yes |
☐ No
TABLE 1: MINIMUM PREVENTATIVE MAINTENANCE, ELECTRIC POWERED EQUIPMENT
| Visual Inspections |
| Operational Tests |
| Mechanical Inspections |
| Cleaning and Lubrication |
| Check for fluid leaks |
| Test service brake |
| Check master cylinder level |
| Disconnect battery |
| Inspect sheet metal |
| Test parking brake |
| Check master cylinder linkage |
| Remove floor boards |
| Check overhead guard |
| Operate seat adjuster |
| Check master cylinder bypass |
| Open SCR compartment |
| Inspect lift chains |
| Test battery indicator |
| Check drive axle fluid |
| Discharge capacitor |
| Inspect upright rails, rollers, wear pads and shims |
| Test horn |
| Inspect tilt mounting |
| Open contractor panel |
| Inspect forks safety locks |
| Check hour meter |
| Check trunions |
| Open hydraulic pump compartment |
| Inspect rail wear pattern |
| Test brake limit switch |
| Check tilt yoke lock |
| Air clean truck: |
| Inspect all cylinders |
| Test plugging control |
| Check upright adjustment |
| clean packing glands |
| Inspect packing glands |
| Test speed control |
| Inspect sump breather |
| Grease drive and steer axle, |
| Inspect chain, chain retainers and adjustment |
| Test directional control |
| Check hydraulic oil level |
| area under floor boards |
| Inspect load backrest |
| Operate steering |
| Check steering system |
| SCR control, contact panel, |
| Check tires |
| Test for upright racking |
| Check tie rod ends |
| hydraulic pump and motor |
| Check all switches |
| Battery Load Drop Test |
| Check electrical panel |
| check seat brake linkage |
| Check battery and battery cables and connectors |
| Evaluate uprightdrift |
| Note visible Battery spill, corrosion or contamination |
| lubricate misc. linkage |
| Inspect control linkage |
| Check battery voltage |
| Inspect Side Shift wear bushings |
| lubricate units |
Check truck cables
TABLE 2: MINIMUM PREVENTATIVE MAINTENANCE, LIQUIFIED PETROLEUM GAS (LPG) POWERED EQUIPMENT
| Visual Inspections |
| Operational Tests |
| Mechanical Inspections |
| Cleaning and Lubrication |
| Check for fluid leaks |
| Test service brake |
| Check master cylinder level |
| Remove floor boards |
| Inspect overhead guard |
| Test parking brake |
| Check master cylinder linkage |
| Blow out radiator core |
| Inspect load backrest |
| Test neutral start switch |
| Check master cylinder bypass |
| Air clean unit |
| Inspect upright rails, rollers, wear pads and shims |
| Test inching operations |
| Check drive axle fluid |
| Change engine oil |
| Check forks and safety locks |
| Steering (power and manual) |
| Check transmission fluid |
| Change oil filter |
| Check rail wear patterns |
| Check for unusual noise |
| Check power steering linkage |
| Clean/replace air filter |
| Check tire wear |
| Check for exhaust leaks and/or smoke |
| Check throttle linkage |
| Lubricate all zerks |
Check tire wear Check for water leaks
| Check instruments |
| Check tie rod ends, and sideshift wear bushings |
| Check transmission filter |
Check throttle linkage
| Inspect lift cylinder |
| Inspect and adjust belts |
| Check directional linkage |
| Check battery |
| Inspect tilt cylinder |
| Evaluate upright drift |
| Check upright latch |
| Lubricate misc. linkage |
| Inspect packing glands |
| Check for upright racking |
| Check plugs, vaporizer,LP Regulator and plug wires |
| Clean/replace sump breather |
| Inspect door latches |
| Check horn, lights and hour meter |
| Check tilt cylinder mounting |
| Inspect chain wear, chain retainers and adjust as required |
| Check clutch/Inching linkage |
| 3. |
| PM and repair services |
Bidder is capable of arriving on site and initiating repairs within two (2) business days, after the callout.
| Pass/Fail |
| ☐ Yes |
☐ No
| 4. |
| PM and repair services |
Bidder is capable of preparing a report of the work performed under this contract and sent to the customer, within fifteen (15) calendar days after of work is completed. Reports can be submitted either by mailing hard copies of work order or electronically based on the customer’s preference.
| Pass/Fail |
| ☐ Yes |
☐ No
| 5. |
| Bidder will perform repair services on a customer request basis only. Repair issues detected during a regularly scheduled PM, which can be completed at the same time as the PM services for less than $500, will be accomplished without prior authorization from the customer. Such repairs are to be billed separately from the PM Service. |
| Pass/Fail |
| ☐ Yes |
☐ No
| 6. |
| PM Service Bidder will perform PM services twice annually with each service appointment scheduled at least 120 calendar days apart, or as required by the equipment service manual. If the manufacturer's warranty has expired, the customer may specify an alternative interval. |
| Pass/Fail |
| ☐ Yes |
☐ No
| 7. |
| Bidder shall provide all manuals when delivering the ordered forklift. The required operator training will be scheduled within two weeks of delivery. Manuals and training will both be provided at no additional cost. |
| Pass/Fail |
| ☐ Yes |
☐ No
| 8. |
| Bidder will accept orders using the DES Contract Automobile Request System (CARS) online ordering system, and will upload vehicle model and option data into the CARS system following instructions provided by DES. All order requests from CARS will be responded to within 5 business days, and purchase orders in CARS will be acknowledged within 5 business days. In the event that CARS is replaced, orders will be placed through the replacement system, and require the same response times. |
Bidder is responsible for timely updating forklift ordering information in CARS. Bidder must provide updates within 5 business days when notified of an issue with information in CARS.
| Pass/Fail |
| ☐ Yes |
☐ No
| 9. |
| Bidder will inform Purchasers of any delivery delay and provided a new estimated delivery date within 2 business days. |
| Pass/Fail |
| ☐ Yes |
☐ No
| 10. |
| Bidder will ensure all technicians are certified to work on vehicles before beginning repair or maintenance work. |
| Pass/Fail |
| ☐ Yes |
Response only for Category 1: Electric Motor Rider Forklift Minimum Specifications Bidder agrees all models bid in this category meet the specifications below
| 11. |
| Basic Capacity: Min 3000 lbs at 24” Load Center (LC) |
Power: Electric Mast: Minimum Fork Height (MFH): 189” Maximum Overall Lowered Height (OAL): 83” Minimum Free Lift (FL): 47” Forks: 42” Long x 4” wide x 1.7” thick Standard Attachments: Side Shift Minimum Battery: 36 Volt Battery Minimum Amp Hrs or KwH: 530 Battery Charger: Maximum Charge Time - 4 hours Input Voltage – 480 Volt 3 Phase Input Amps Required – 50 Amp
Dimensions: Maximum Overall width – 46” Maximum Overall Height – 87” Reverse Travel Alarm Horn 2 Forward LED Work Lights 2 Rear LED Work Lights Safety Light Fire extinguisher Rearview mirrors Overhead Guard
Travel speed: Can travel up to 10 mph loaded Hour / battery display indicator LCD Multi Function display 3 function control valve (lift, tilt & side shift) Data Log Operator Password
| Pass/Fail |
| ☐ Yes |
Response only for Category 2: Electric Motor Narrow Aisle Forklift Minimum Specifications
| 12. |
| Capacity: Min 3000 lbs at 24” Load Center |
Engine: Electric Minimum Fork Width: 4in Minimum Fork Length: 36 in Maximum Aisle Width: 10.5 ft Maximum height of lowered forks: 2.25in Mast: Minimum Fork Height (MFH): 189” Maximum Overall Lowered Height (OAL): 83” Minimum Free Lift (FL): 47” Forks: 42” Long x 4” wide x 1.7” thick Standard Taper Counter Balanced: Yes Reach: Single
Reverse Travel Alarm Anti-rollback system Horn LED Work Light LED Rear Work Light Safety Light
Regenerative braking Min: 36 Volt Battery or equivalent Wheel Type: Polyurethane
Travel speed: Can travel up to 7 mph loaded Lift Speed: 20 feet per min (fpm) Maximum Speed limiter Maximum speed with load 8 mph Duty cycle - continuous use 4 hours min Keyless 3 function control valve (lift, tilt & side shift) Programable Entry Hour / battery display indicator Fully Automatic Power charger provided
| Pass/Fail |
| ☐ Yes |
Response only for Category 3: Electric Motor Narrow Aisle Walkie Forklift Minimum Specifications
| 13. |
| Capacity: Min 2,000 lbs at 24” Load Center |
Engine: Electric Minimum Fork Width: 4 in Minimum Fork Length: 36 in Maximum Fork OD: 27” Maximum Width: 10.5 ft Maximum height of lowered forks: 3.25 in
Regenerative braking 24 Volt Battery or equivalent
Wheel Type: Polyurethane Travel speed: 3 mph minimum unloaded Travel speed: 2 mph minimum loaded Battery: Minimum 12V Duty cycle - continuous use 4 hours min Lift, Forward, Reverse, Brake and Safety Auto Reverse Control Handle Keyless Hour / battery display indicator
| Pass/Fail |
| ☐ Yes |
Response only for Category 4: Electric Motor Hand Forklift Minimum Specifications
| 14. |
| Capacity: Min 3,000 lbs at 24” Load Center |
Engine: Electric Minimum Fork Width: 4 in Minimum Fork Length: 36 in Maximum Fork OD: 27” Maximum Width: 10.5 ft Maximum height of lowered forks: 3.25 in
Regenerative braking 24 Volt Battery or equivalent
Wheel Type: Polyurethane Travel speed: 3 mph minimum unloaded Travel speed: 2 mph minimum loaded Battery: Minimum 12 V Duty cycle - continuous use 4 hours min Lift, Forward, Reverse, Brake and Safety Auto Reverse Control Handle Keyless Hour / battery display indicator
| Pass/Fail |
| ☐ Yes |
Response only for Category 5: Internal Combustion Engine Cushion Tire Minimum Specifications
| 15. |
| Capacity: Min 3000 lbs at 24” Load Center (LC) |
Engine: Internal Combustion Engine Power: LPG Mast: Minimum Fork Height (MFH): 189” Maximum Overall Lowered Height (OAL): 83” Minimum Free Lift (FL): 47” Forks: 42” Long x 4” wide x 1.7” thick Standard Taper Attachments: Side Shift
Dimensions: Maximum Overall width – 46” Maximum Overall Height – 87”
Tires: Drive - Smooth
Minimum Fork Length: 42 in Minimum Fork Width: 4 in Minimum Fork Thickness: 1.5 in
New 33# LPG Tank Reverse Travel Alarm Horn 2 Forward LED Work Light 2 LED Rear Work Light Safety Light Fire extinguisher Rearview mirrors Over Head Guard (OHG) On / Off Key switch Frame Stabilizer Min: 12 Volt Battery or equivalent
Travel speed: Can travel up to 10 mph loaded Lift Speed: 120 feet per min (fpm) Up and down control Hour display indicator Owner's Manual Powershift Transmission LCD Multi Function display 3 function control valve (lift, lower, tilt & side shift) Data log Operator Password
| Pass/Fail |
| ☐ Yes |
Response only for Category 6: Internal Combustion Engine Pneumatic Tire Forklift Minimum Specifications
| 16. |
| Capacity: Min 3000 lbs at 24” Load Center (LC) |
Engine: Internal Combustion Engine Power: Diesel or LPG Mast: Minimum Fork Height (MFH): 189” Maximum Overall Lowered Height (OAL): 86” Minimum Free Lift (FL): 47” Forks: 42” Long x 4” wide x 1.7” thick Standard Taper Attachments: Side Shift
Dimensions: Maximum Overall width – 46” Maximum Overall Height – 87”
Tires: Drive - Pneumatic Steers - Pneumatic
Engine: Internal Combustion Engine Minimum Fork Length: 42 in Minimum Fork Width: 4 in Minimum Fork Thickness: 1.5 in
Reverse Travel Alarm Horn Strobe Light LED Work Light LED Rear Work Light Safety Light Fire extinguisher 33# LPG Tank
Rearview mirrors On / Off Key switch Frame Stabilizer
Min: 12 Volt Battery Travel speed: Can travel up to 10 mph loaded Hour display indicator LCD Multi Function display 3 function control valve (lift, tilt & side shift) Data log Operator Password
| Pass/Fail |
| ☐ Yes |
Response only for Category 7: Heavy Duty Internal Combustion Engine Pneumatic Tire Forklift Minimum Specifications
| 17. |
| Capacity: Min 13000 lbs at 24” Load Center (LC) |
Engine: Internal Combustion Engine Power: Diesel or LPG Mast: 2 Stage Minimum Fork Height (MFH): 189” Maximum Overall Lowered Height (OAL): 86” Minimum Free Lift (FL): 47” Forks: 42” Long x 4” wide x 1.7” thick Standard Taper Attachments: Side Shift
Tires: Drive - Pneumatic Steers - Pneumatic
Engine: Internal Combustion Engine Minimum Fork Length: 42 in Minimum Fork Width: 4 in Minimum Fork Thickness: 1.5 in
Wet Disc Brakes Reverse Travel Alarm Horn Strobe Light LED Work Light LED Rear Work Light Safety Light
33# LPG Tank
Rearview mirrors On / Off Key switch Frame Stabilizer
Min: 12 Volt Battery Travel speed: Can travel up to 10 mph loaded Hour display indicator LCD Multi Function display 3 function control valve (lift, tilt & side shift) Data log Operator Password
| Pass/Fail |
| ☐ Yes |
Response only for Category 8: Rough Terrain Forklift Minimum Specifications
| 18. |
| Basic Capacity: Min 6,000 lbs at 24” Load Center (LC) |
Engine: Internal Combustion Engine Power: Diesel Mast: Minimum Fork Height (MFH): 230” Maximum Overall Lowered Height (OAL): 221” Minimum Free Lift (FL): 4” Min Extended height: 230 in
Forks: 48” Long x 6” wide x 2.0” thick Type (either Standard Taper Attachments: Side Shift
Dimensions: Maximum Overall width – 68” Maximum Overall Height – 119”
Tires: Drive – Single or Dual - Pneumatic Steers - Pneumatic
Reverse Travel Alarm Horn Strobe Light 2 Forward LED Work Lights LED Rear Work Light Safety Light
Rearview mirrors
Min: 12 volt Travel speed: Can travel up to 10 mph loaded Self-regenerating Diesel Particulate Filter 4 function control valve (lift, tilt & side shift with valving for any potential 4th function)
| Pass/Fail |
| ☐ Yes |
Response only for Category 9: Telehandler Forklift Minimum Specifications
| 19. |
| Capacity: Min 5500 lbs |
Engine: Internal Combustion Engine Power: Diesel Min Lift Height: 19 ft Reverse Travel Alarm Horn Strobe Light Dome Light 2 Forward LED Work Lights LED Rear Work Light Rear Safety Light – On in Reverse Fire extinguisher Rearview mirrors On / Off Key switch Cab
| Pass/Fail |
| ☐ Yes |
Return this exhibit to Procurement Coordinator at:
DESContractsTeamMaple@des.wa.gov
EXHIBIT B-1 – SPECIFICATIONS REQUIREMENTS PAGE 2
image1.jpeg
File details come from the government source that posted it. Updated .