26 0930 WDS Phase 1 - Project Manual_Part3.pdf

9 Product Reference Guide

Fasteners & Plates Sure-Seal, Sure-White, and Sure-Tough EPDM

Sure-Weld TPO

Sure-Flex PVC

HP Fastener

Applicable for Sure-Seal, Sure-Tough, Sure-Weld, and Sure-Flex mechanically fastened and fully adhered systems. Can be used to secure all EPDM membranes, RUSS, and insulation. Not applicable for securing TPO and PVC membranes. Compatible with wood (minimum 15 ⁄32" [12mm] CDX plywood) and steel decks (22-guage [0.76 mm] or heavier).

Sizes Available:

1¼", 2" – 15" (1" Increments)

Size & Quantity Per Box:

2" – 6": 1,000; 7" – 12": 500; 13" – 15": 250; 1¼":1000

Gyptec Fastener & Plate

Applicable for Sure-Seal, Sure-Weld, and Sure-Flex mechanically fastened and fully adhered systems. Can be used to secure membranes, RUSS, and insulation. Applicable to cementitious wood fiber, lightweight concrete and gypsum decks.

Sizes Available:

2½" – 10" (½" Increments)

Size & Quantity Per Box:

2½" – 7": 500; 7½" – 10": 250

GYPTEC PLATE

Sizes Available:

2" Metal membrane plate 3" Metal insulation plate

Quantity Per Box: 1,000

HD 14-10 Fastener

Applicable for Sure-Seal, Sure-Tough, Sure-Weld, and Sure-Flex mechanically fastened and fully adhered systems. Can be used to secure membranes, RUSS, and insulation. Compatible with structural concrete (minimum 3,000 psi).

Sizes Available:

2" – 12" (1" Increments) 14" – 24" (2" Increments)

Size & Quantity Per Box:

2" – 4": 1,000; 5" – 11": 500; 12" – 24": 250

Applicable for Sure-Seal, Sure-Weld, and Sure-Flex mechanically fastened roofing systems. Can be used to secure membranes, RUSS, and insulation. Compatible with structural concrete decks (minimum 2,500 psi).

Sizes Available:

2" – 6" (½" Increments) 7" – 12" (1" Increments)

Size & Quantity Per Box:

2" – 8": 500; 9" – 12": 250

CD-10 Fastener

ASAP Insulfast Fastener & Plate

A pre-assembled InsulFast fastener and plastic or metal insulation plate is acceptable for insulation attachment in both mechanically attached and fully adhered applications. Can be used to secure insulation.

Compatible with wood (minimum 15 ⁄32" [12mm] CDX plywood) and steel decks (22-guage [0.76 mm] or heavier). Longer fastener sizes available through special order.

Sizes Available:

2¼", 3" – 8" (1" Increments)

Size & Quantity Per Box:

2¼" – 8": 250; 10" – 12": 200

Applications requiring a fastener larger than 8" should use HD 14-10 fasteners.

AccuTrac Plate (Insulation)

AccuTrac Plates are 3" square flat- or recessed-bottom plates made of Galvalume-coated steel. Used to fasten insulation with the AccuTrac Tool.

Sizes Available:

3"

Quantity Per Box: 1,000

10Fasteners & Plates

Sure-Seal, Sure-White, and Sure-Tough EPDM

Sure-Weld TPO

Sure-Flex PVC

HP-X Fastener™ & HP-XTRA Fastener

Applicable for Sure-Seal, Sure-Weld, and Sure-Flex mechanically fastened and fully adhered systems. Can be used to secure membranes, RUSS, and insulation. Compatible with wood (minimum 15 ⁄32" [12mm] CDX plywood) and steel decks (22-guage [0.76 mm] or heavier).

Sizes Available:

2" – 8" (1" Increments) 10" – 16" (2" Increments)

Size & Quantity Per Box:

2" – 4": 1,000; 5" – 12": 500; 14" – 16": 250

HP-XTRA FASTENER

Also available (not shown) A #21 diameter fastener compatible with wood (minimum 15 ⁄32" [12mm] CDX plywood) and steel decks (22-guage [0.76 mm] or heavier).

Sizes Available:

2" – 8" (1" increments)

Size & Quantity Per Box:

500 (2" – 6"), 250 (7" – 8")

HP-X ASAP

A pre-assembled HP-X fastener and Piranha Plate™.

Applicable for Sure-Weld and Sure-Flex mechanically fastened systems. Can be used to secure membranes, RUSS, and insulation. Compatible with wood (minimum 15 ⁄32" [12mm] CDX plywood) and steel decks (22-guage [0.76 mm] or heavier).

Sizes Available:

2" – 10" (1" Increments) 12" – 16" (2" Increments)

Size & Quantity Per Box:

2" – 9": 250; 10" – 12": 200; 14" – 16": 150

HP Lite-Deck Fastener

Applicable for Sure-Seal, Sure-Weld, and Sure-Flex mechanically fastened and fully adhered roofing systems. Used in conjunction with a specially designed 3" Lite-Deck Metal Plate for Insulation attachment to gypsum, cementitious wood fiber (Tectum), and lightweight structural concrete decks. Features an oversize diameter (0.312" shank) and a deep, coarse thread designed for high pullout resistance.

Sizes Available:

25/8", 3" – 10", 12" (1" Increments)

Size & Quantity Per Box:

25/8" – 4": 500; 5" – 8": 250; 9",10",12": 125

HP Polymer Seam Plate

Used in conjunction with HP Fasteners to mechanically fasten Sure-Tough membrane and RUSS over steel decks.

(22-guage [0.76mm] or heavier)

Sizes Available:

2" diameter

Quantity Per Box: 1,000

HP-XTRA POLYMER SEAM PLATE

Also Available (not shown) Used in conjunction with HP-XTRA Fasteners to mechanically fasten Sure-Tough EPDM membranes over steel decks.

Sizes Available:

23/8" diameter

Quantity Per Box: 1,000

Induction Welding Plate

Used for Sure-Weld and Sure-Flex systems. A 3" round specially coated plate is used with HP-X Fasteners and the corresponding induction welding tool for membrane and insulation attachment.

OPTIONS INCLUDE:

Rhinobond Induction Welding TPO Plate & PVC Plate isoWELD Induction Welding TPO Plate & PVC Plate

Sizes Available:

3" diameter

Quantity Per Box: 500

Insulation Fastening Plate

Along with the appropriate fastener, used for insulation securement over wood (minimum 15 ⁄32" [12mm] CDX plywood), steel (22-guage [0.76 mm] or heavier), and concrete decks. Available in steel and plastic versions.

Sizes Available:

3" diameter

Quantity Per Box: 1,000

11 Product Reference Guide

Fasteners & Plates Sure-Seal, Sure-White, and Sure-Tough EPDM

Sure-Weld TPO

Sure-Flex PVC

Piranha Plate

Along with the appropriate fastener, used to secure Sure- Weld and Sure-Flex membranes over wood (minimum 15 ⁄32" [12mm] CDX plywood), steel (22-guage [0.76 mm] or heavier), and concrete decks.

Sizes Available:

23/8" diameter

Quantity Per Box: 1,000

HP-XTRA PIRANHA PLATE

Also Available (not shown) Used with HP-XTRA Fasteners to secure Sure-Weld and Sure-Flex membranes to wood (minimum 15 ⁄32" [12mm] CDX plywood), steel (22-guage [0.76 mm] or heavier) decks.

Sizes Available:

23/8" diameter

Quantity Per Box: 1,000

Lite-Deck Metal Plate

Used in conjunction with HP Lite-Deck Fasteners for insulation attachment to gypsum, cementitious wood fiber (Tectum), and lightweight concrete decks.

Sizes Available:

3" diameter

Quantity Per Box:

Metal Fastening Bar

Galvalume™-coated metal bar used to mechanically fasten EPDM membranes. The bar can be easily cut to desired length. Installed using HP-X Fasteners.

Sizes Available:

1" wide x 10' long

Size & Quantity Per Box:

50 pcs; 500 Linear Feet

Purlin Fastener

Used with Carlisle's Metal Retrofit Roofing System to secure membrane and RUSS to structural steel purlins. Provides superior back-out resistance in standard 16-gauge Purlins.

Sizes Available:

3¾", 4¾", 5¾", 7", 8"

Quantity Per Box: 1,000

Insulfast™ Fastener

Applicable for Sure-Seal, Sure-White, Sure-Weld, and Sure-Flex mechanically fastened and fully adhered systems. Can be used to secure insulation. Compatible with wood (minimum 15 ⁄32" [12mm] CDX plywood) and steel decks (22-guage [0.76 mm] or heavier).

Sizes Available:

15 ⁄8", 2", 2¼", 3" – 8" (1" increments)

Size & Quantity Per Box:

15 ⁄8", 2¼", 2" – 8": 1,000

Oval Barbed Plate

Along with the appropriate fastener, used to secure Sure-Flex membranes to wood (minimum 15 ⁄32" [12mm] CDX plywood) and steel decks (22-guage [0.76 mm] or heavier).

Sizes Available:

1½" x 2¾" Oval

Quantity Per Box: 500

Polymer Pre-Assembled

Pre-assembled HP Fastener and Polymer Seam Plate.

Applicable to wood (minimum 15 ⁄32" [12mm] CDX plywood) and steel decks (22-guage [0.76 mm] or heavier).

Sizes Available:

2" – 12" (1" Increments)

Size & Quantity Per Box:

2": 500; 3": 450; 4", 5": 400; 6": 350; 7", 8": 300; 9": 250; 10" – 12": 200

12Fasteners & Plates

Sure-Weld TPO

Sure-Flex PVC

Seam Fastening Plate

A 2" diameter metal plate, Applicable with HP, MP 14-10 and CD-10 fasteners, used for insulation attachment on MF Systems or membrane securement at angle changes on Adhered Systems in conjunction with the appropriate Carlisle fastener.

Sizes Available:

2" diameter

Quantity Per Box: 1,000

Termination Bar (Aluminum)

Extruded aluminum bar that is designed for securing and sealing compression type flashing terminations. The bar features a top edge for ease of applying Carlisle’s Lap Sealant for EPDM installations or Universal Single Ply Sealant for TPO installations. The bar can be easily cut to any desired length.

Sizes Available:

1" wide x 10' long

Quantity Per Box: 50 pcs; 500 Linear Feet

Term Bar Nail-In

Used with Carlisle's Termination Bar or Seam Fastening Plates to secure membrane to concrete block, brick, or structural concrete walls. A zinc-plated steel pin provides excellent corrosion resistance while the zinc alloy body provides excellent holding power.

Sizes Available:

1¼"

Quantity Per Box: 1,000

SecurFast™ Insulation Fastening Plate

Designed for SECUROCK® securement under Sure-Seal, Sure-White, Sure-Flex, or Sure-Weld roofing systems.

Plates are stamped from Galvalume-coated steel for long-term protection against corrosion.

Sizes Available:

27⁄8"

Quantity Per Box: 1,000

RetroDriller Fastener

A specially designed fastener with a ½" drill point used for attaching Sure-Tough, Sure-Weld, and Sure-Flex membranes to structural steel purlins (up to 3 ⁄16") in standing seam metal roof retrofit applications.

Sizes Available:

4", 5", 6", 8" & 10"

Size & Quantity Per Box:

Dual Prong Base Sheet Fastener

Designed to secure base sheets over gypsum, fibrous cement, and lightweight concrete decks. Fasteners are installed using Carlisle's stand-up Dual Prong Applicator, which holds and drives the tube into the deck and sets the wires.

Sizes Available:

1.8"

Quantity Per Box: 500

13 Product Reference Guide

Adhesives, Primers, and Sealants

Sure-Seal, Sure-White, and Sure-Tough EPDM

Sure-Weld TPO

Sure-Flex PVC

FleeceBACK

Multiple-Ply Systems

Low-VOC Product

CAV-GRIP® III Adhesive/Primer

Carlisle’s CAV-GRIP III is a spray applied aerosol contact adhesive and primer used to adhere EPDM and TPO to horizontal and vertical surfaces and FleeceBACK membranes to vertical surfaces. CAV-GRIP III can also be used as a primer for VapAir Seal 725TR and as an unexposed asphalt primer for Flexible FAST.

Coverage Rate: See Product Data Sheet.

Packaging:

40# aerosol cylinder – Product Number: 329902 85# aerosol cylinder – Product Number: 332659

Shelf Life: 12 months unopened container

90-8-30A EPDM Bonding Adhesive

A high-strength, solvent-based contact adhesive that allows quick bonding of cured EPDM membranes to various substrates. Designed for bonding Sure-White, Sure-Seal, Sure-Tough, and Epichlorohydrin membranes to approved substrates.

Coverage Rate: 60 square feet per gallon of finished surface.

Packaging: 5-gallon pail

Product Number: 302124

Shelf Life: 12 months

* Not compliant in all CA counties

Aqua Base 120 Bonding Adhesive

A semi-pressure-sensitive, water-based adhesive. This product may be used as a two-sided contact adhesive with EPDM and TPO membranes. Also compatible with FleeceBACK EPDM and FleeceBACK TPO membranes.

Coverage Rate: 120 square feet per gallon of finished surface. (May vary due to conditions such as insulation type or wall construction.)

Packaging: 5-gallon pail

Product Number: 307431

Shelf Life: 12 months

CAV-GRIP PVC Adhesive

Carlisle's CAV-GRIP PVC is a low-VOC adhesive that can be used for adhering standard PVC to a variety of substrates on both wall and field applications, and for adhering FleeceBACK membranes to vertical walls.

Coverage Rate: See Product Data Sheet.

Packaging:

Standard cylinder – Product Number: 335178 Large cylinder – Product Number: 336104

Shelf Life: 12 months unopened container

CAV-PRIME TPO Primer

Carlisle's TPO Primer packaged in a pressurized cylinder for spray application. Carlisle's TPO Primer is a high-solidscontent, clear (translucent color), polymer-based splice primer used to prepare TPO membrane for improved adhesion to pressure-sensitive (PS) TPO accessories. CAV-PRIME primers are applied using a self-contained spray system coupled with a spray gun with extension wand and applicator attachment kit. CAV- PRIME spray guns, hoses, and applicator attachment kits are each sold separately.

Coverage Rate: 1,540 sq. ft./cylinder

Packaging: 27 lbs Cylinder

Product Number: 341448

CAV-PRIME HP-250

Primer

Carlisle's HP-250 Primer packaged in a pressurized cylinder for spray application.

HP-250 Primer is a solvent-based product designed for one-step cleaning and priming of EPDM surfaces prior to the application of SecurTAPE, Factory-Applied Tape, and all other pressure-sensitive (PS) products.

CAV-PRIME primers are applied using a self-contained spray system coupled with a spray gun with extension wand and applicator attachment kit. CAV-PRIME spray guns, hoses, and applicator attachment kits are sold separately.

Coverage Rate: 1,540 sq. ft./cylinder

Packaging: 27 lbs Cylinder

Product Number: 341445

CAV-PRIME Low-VOC EPDM & TPO Primer

Carlisle's Low-VOC membrane primer packaged in a pressurized cylinder for spray application. Low-VOC Primer is a solvent-based product designed for one-step priming of EPDM or TPO surfaces prior to the application of SecurTAPE™, Factory-Applied Tape™, Coverstrip, and all other pressure-sensitive (PS) products. This product is designed to comply with VOC regulations. CAV-PRIME is applied via a self-contained spray system coupled with a spray gun with extension wand and applicator attachment kit. CAV-PRIME spray guns, hoses, and applicator attachment kits are each sold separately.

Coverage Rate: 1,760 sq. ft/Cylinder

Packaging: 32 lbs Cylinder

Product Number: 341449

14Adhesives, Primers, and Sealants

Sure-Weld TPO

Sure-Flex PVC

FleeceBACK

Multiple-Ply Systems

Low-VOC Product

EPDM X-23 Low-VOC Bonding Adhesive

A high-strength, solvent-based contact adhesive that bonds EPDM membranes to various porous and non-porous substrates. This product meets the <250 gpl VOC content requirements of the OTC Model Rule for Single-Ply Roofing Adhesives.

Coverage Rate: 60 square feet per gallon of finished surface.

Packaging: 5-gallon pail

Product Number: 324002

Shelf Life: 12 months

* Not compliant in all CA counties

CCW-702LV Primer

A low-VOC, solvent-based, high-tack adhesive designed to promote maximum adhesion of Carlisle 725TR Air and Vapor Barrier to approved substrates. Also used as a surface prep to promote adhesion of FAST Adhesive.

Coverage Rate: 300 – 350 square feet per gallon.

Packaging: 5-gallon pails

Product Number: 316148

Shelf Life: 12 months unopened container

Cold Applied Adhesive

An asphalt-modified polyether, one-sided, wet lay-in adhesive designed to adhere to FleeceBACK AFX membranes and Carlisle’s modified base sheet.

Coverage Rate: 67 square feet per gallon of finished surface for smooth surfaces. 50 square feet per gallon of finished surface for uneven surfaces.

Packaging: 5-gallon pail

Product Number: 319689

Shelf Life: 9 months when stored below 90˚F

Cut-Edge Sealant

TPO CUT-EDGE SEALANT

A clear, free-flowing polymeric material designed for sealing cut edges (exposed fabric) of Sure-Weld TPO membrane.

Coverage Rate: 225' – 275' per 16-oz. bottle when applied with 1⁄8" bead.

Packaging: (8) 16-oz. Bottles/carton

Product Number:

303436 – Clear 327530 – Low-VOC

Shelf Life: 12 months

PVC CUT-EDGE SEALANT

Also available (not shown) PVC Cut-Edge Sealant is not required for use, but can be used for sealing cut edges (exposed fabric) of Sure-Flex PVC membrane. Cut-Edge Sealant is clear in color.

Packaging: (12) 16-oz. Bottles/carton

Product Number: 307754

Shelf life: 12 months

Coverage Rate: 225' – 275' per bottle when applied with 1⁄8" bead.

Flexible FAST Adhesive

A low-rise, two-component, VOC-free, energy-absorbing, impact-resistant adhesive used to adhere FleeceBACK membranes and insulation boards to various substrates for a totally non-penetrating system application. Flexible FAST adhesive provides a wider window of temperature workability (25°F – 120°F).

Coverage Rate: See Product Data Sheet.

Packaging:

50-gallon drums – Part A – Product Number: 310472 50-gallon drums – Part B – Product Number: 310473 15-gallon drums – Part A – Product Number: 317329 15-gallon drums – Part B – Product Number: 317331 5-Gallon Jug – Part A – Product Number: 329722 5-Gallon Jug – Part B – Product Number: 329723 Dual Tank HFO – Part A – 336119 Dual Tank HFO – Part B – 336341 Dual Cartridge – Product Number: 322958

Shelf Life: 12 months (Part A and Part B)

HP-250 EPDM Primer

A solvent-based product designed for cleaning and priming EPDM membranes prior to the application of pressure-sensitive products.

Coverage Rate: As high as 450 square feet per gallon with Kleen EPDM membrane. Approx. 250 square feet per gallon with dusted EPDM membrane.

Packaging:

(6) 1-gallon cans – Product Number: 302070 3-gallon pails – Product Number: 332683

Shelf Life: 12 months

15 Product Reference Guide and Sealants

Sure-Seal, Sure-White, and Sure-Tough EPDM

Sure-Weld TPO

Sure-Flex PVC

FleeceBACK

Multiple-Ply Systems

Low-VOC Product

* Not compliant in all CA counties

Low-VOC PVC Bonding Adhesive

A high-strength, solvent-based contact adhesive that allows bonding of PVC and KEE HP membranes to various porous and non-porous substrates. Meets the <250 gpl VOC content requirements of the OTC Model Rule for Single-Ply roofing adhesives.

Coverage Rate: 60 square feet per gallon of finished surface.

Packaging: 5-gallon pail

Product Number: 309126

Shelf Life: 12 months

Low-VOC Primer

Designed for one-step cleaning and priming of EPDM and TPO surfaces prior to the application of pressure-sensitive products. It is a Low-VOC product that is ideal for use where environmental issues are a concern.

Coverage Rate: As high as 700 square feet per gallon with TPO or Kleen EPDM membrane. Approx. 250 square feet per gallon with dusted EPDM membrane.

Packaging:

(6) 1-gallon cans – Product Number: 329160 3-gallon pails – Product Number: 332714

Shelf Life: 12 months

LIQUISEAL® Liquid Flashing

A two-component, polyurethane-based system that creates a cold-applied liquid flashing that is compatible with all Carlisle EPDM, TPO, PVC and KEE HP membranes.

LIQUISEAL Liquid Flashing is ideal for flashing oddly shaped penetrations and tying together dissimilar roofing systems without building a knee wall or impeding drainage.

Coverage Rate: 13.6 square feet per gallon.

Packaging: (8) ½ gal/carton, 1-gallon pails

Product Number:

330891 – White ½ gallon 330892 – White 1-gallon 333301 – Gray ½ gallon 333302 – Gray 1-gallon

Shelf Life: 12 months unopened container

Low-VOC Bonding Adhesive*

A high-strength, solvent-based contact adhesive that allows bonding of all EPDM and TPO membranes to various porous and non-porous substrates. This product meets the <250 gpl VOC content requirements of the OTC Model Rule for Single-Ply Roofing Adhesives.

Coverage Rate: 60 square feet per gallon of finished surface.

Packaging: 5-gallon pail

Product Number: 303090

Shelf Life: 12 months

LOW-VOC Bonding Adhesive 1168*

A high-strength, solvent-based contact adhesive that allows bonding of all EPDM and Sure-Weld TPO membrane to various porous and non-porous substrates.

This product meets the requirements for SCAQMD regulations.

Coverage Rate: 60 square feet per gallon of finished surface.

Packaging: 5-gallon pail

Product Number: 318847

Shelf Life: 12 months

LOW-VOC HydroBond™ Adhesive

A water-based, wet lay-in, one-sided dispersion adhesive used to adhere all Sure-Flex PVC smooth-backed and FleeceBACK membranes to a variety of substrates.

Cannot be used with KEE HP, TPO or EPDM smooth-backed membrane.

Coverage Rate:

Roller application – 100 square feet per gallon of finished surface.

Spray application – 133 square feet per gallon of finished surface.

Packaging: 5-gallon pail

Product Number: 335186

** Certain restrictions apply, see Product Data Sheet.

16Adhesives, Primers, and Sealants

Sure-Weld TPO

Sure-Flex PVC

FleeceBACK

Multiple-Ply Systems

Low-VOC Product

* Not compliant in all CA counties

Low-VOC PVC Step 2 Primer

A high-solids-content, clear Polymer-based primer used to prepare KEE HP and PVC membrane to be bonded to PVC Pressure Sensitive Cover Strip. Meets the <250 gpl VOC content requirements of the OTC Model Rule.

Coverage Rate: As high as 700 square feet per gallon.

Packaging: (2) 1-gallon cans

Product Number: 332652

Shelf Life: 6 months

Low-VOC UN-TACK Adhesive Remover and Cleaner

Designed for use with TPO and EPDM membranes, Low- VOC UN-TACK Cleaner is used to remove adhesives and primers from a variety of surfaces including single-ply membranes, accessories, metal, plastic, rubber, and glass. May also be used to flush CAV-GRIP III Hoses and Guns prior to storage. Do not use with CAV-PRIME.

Coverage Rate: 250 – 300 FT2/Cylinder surface area to be cleaned.

Packaging: Small Aerosol Cylinder

Product Number: 330793

Low-VOC PVC Step 1 Activator

A high-strength, solvent-based activator that allows PVC Pressure-Sensitive Cover Strip to be bonded to PVC or KEE HP membranes. Meets the <250 gpl VOC content requirements of the OTC Model Rule.

Coverage Rate: As high as 250 – 300 square feet per gallon.

Packaging: (2) 1-gallon cans

Product Number: 332651

Shelf Life: 12 months

** Certain restrictions apply, see Product Data Sheet.

CAV-GRIP PVC UN-TACK Low-VOC Adhesive Remover and Cleaner

Designed to flush CAV-GRIP PVC hoses and guns prior to storage, CAV-GRIP PVC UN-TACK is also used to remove adhesives and primers from a variety of surfaces including PVC membranes, accessories, metal, plastic, rubber, and glass.

Coverage Rate: 250 – 300 FT²/Cylinder surface area to be cleaned.

Packaging: Small Aerosol Cylinder

Product Number: 336090

CAV-PRIME Low VOC Hose & Gun Cleaner

Designed to clean the spray guns and hoses used to apply CAV-PRIME primers. It can also be used to remove primer from various surfaces including single-ply membranes, accessories, and metal.

Packaging: Small Aerosol Cylinder

Product Number: 341407

PVC Step 2 Primer

A high-solids-content, clear Polymer-based primer used to prepare KEE HP and PVC membrane to be bonded to PVC Pressure Sensitive Cover Strip.

Coverage Rate: As high as 200 – 250 square feet per gallon.

Packaging: (2) 1-gallon cans

Product Number: 332653

17 Product Reference Guide and Sealants

Sure-Seal, Sure-White, and Sure-Tough EPDM

Sure-Weld TPO

Sure-Flex PVC

FleeceBACK

Multiple-Ply Systems

Low-VOC Product

Splice Cement

Designed for splicing cured-to-cured EPDM membranes and non-PS flashings, this high- strength, solvent-based contact cement allows quick bonding of flashing, sheeting, and cured rubber seams. Formulated for application with a ½" medium nap roller and/or a ½"-thick paint brush, the versatile tack time allows large areas to be coated and adhered at one time.

Coverage Rate: 100 square feet per gallon.

This product is for use on non-warranted projects only.

Packaging: (6) 1-gallon cans – Black and White

Product Number:

302342 – Black 302147 – White

Shelf Life:

12 months – Black 9 months – White

Sure-Seal and Sure-White Lap Sealants

Gun-consistency material used to seal the exposed cut edge of Sure-Tough membranes, and the edges of Elastoform Flashing.

Coverage Rate: 22' per tube using a 5⁄16" bead.

Packaging: 25 Tubes/carton

Product Number:

302174 – Black 302172 – White

Shelf Life: 12 months

Sure-Seal EPDM Two-Part Pourable Sealer

A two-component, solvent-free, polyurethane- based product compatible with Carlisle’s Sure-Seal and Sure- White membranes. Designed to provide a flexible, durable and long-lasting seal around hard-to-flash penetrations. Can also be used to provide a permanent tie-in between Sure-Seal membranes and a built-up roof surface, and for attaching lightning rod bases and ground cable clips to the membrane surface.

Coverage Rate: 231 cubic inches of volume per properly mixed gallon.

Packaging:

Part A – (2) 1-gallon pails/ctn.

Part B – (2) 1-pint cans/ctn.

Product Number: 302084

Shelf Life: 12 months unopened container

Sure-Weld TPO Bonding Adhesive

A high-strength, solvent-based contact adhesive that allows bonding of Sure-Weld membrane to various porous and non-porous substrates.

Coverage Rate: 60 square feet per gallon of finished surface.

Packaging: 5-gallon pail

Product Number: 302099

Shelf Life: 12 months

* Not compliant in all CA counties** Certain restrictions apply, see Product Data Sheet.

PVC and KEE HP Membrane Cleaner

This cleaner is specially formulated to clean both new and in-service Sure-Flex PVC and KEE HP membranes.

Coverage Rate: 400 square feet (one surface) per gallon.

Packaging: 5-gallon closed-top pail

Product Number: 329729

One-Part Pourable Sealer

A single-component, moisture-curing, elastomeric polyether sealant that is compatible with Carlisle’s EPDM, TPO, and PVC membranes. Designed to provide a flexible, durable and long-lasting seal around hard-to-flash penetrations. The sealant’s consistency allows for quick pocket filling without mixing. Unused sealant is usable for up to 30 days if pouch is resealed with original cap.

Coverage Rate: 122 cubic inches of volume per ½-gallon pouch.

Packaging: (4) ½-gallon pouches per bucket

Product Number:

307647 – Black 307603 – White

Shelf Life: 12 months unopened container

18Adhesives, Primers, and Sealants

Sure-Weld TPO

Sure-Flex PVC

FleeceBACK

Multiple-Ply Systems

Low-VOC Product

Water Cut-Off Mastic

A one-component, low-viscosity, self-wetting, butyl-blend mastic used in conjunction with roofing and waterproofing systems. It is used as a sealing agent between various membranes and substrates for compression-type terminations.

Coverage Rate: 10' per tube, using a 7/16" bead.

Packaging: 25 Tubes/carton

Product Number: 319621

Shelf Life: 12 months unopened container

Universal Single-Ply Sealant

A 100%-solids, solvent-free, one-part, polyether sealant that provides a weathertight seal to a variety of building substrates.

Coverage Rate: 25' per tube or 600' per carton using a ¼" bead.

Packaging: White is 24 Tubes/carton. Gray is 12 tubes/carton.

Product Number: White is 310131. Gray is 349227.

Shelf Life: 12 months unopened container (@ <90°F)

TPO Primer

A high-solids, clear polymer-based primer used to prepare TPO membrane prior to the application of Pressure- Sensitive (PS) products.

Coverage Rate: 200 – 250 square feet (one surface) per gallon.

Packaging: (6) 1-gallon cans

Product Number: 310471

Shelf Life: 12 months unopened can

Weathered Membrane Cleaner

Used to clean both new and in-service EPDM and TPO membranes prior to seaming or application of Pressure-Sensitive (PS) products. Helps to loosen and remove dirt and other contaminants from the surface of the membranes and leaves a suitable surface for application of adhesive or primer. Please refer to the Product Data Sheets for specific instructions for EPDM and TPO applications.

Coverage Rate: 400 square feet (one surface) per gallon.

Packaging:

(2) 1-gallon closed-top cans, 5-gallon closed-top pail 1-gallon cans

Product Number: 304066 5-gallon pail

Product Number: 302074

* Not compliant in all CA counties** Certain restrictions apply, see Product Data Sheet.

Low-VOC Membrane Cleaner

Use to clean both new and in-service, PVC, KEE HP, TPO, and EPDM membranes prior to the seaming process. Low- VOC Membrane Cleaner contains 100% EPA-exempted solvents and can be used in a wide variety of temperatures.

Packaging: 1-gallon can (2) & 5-gallon can

Product Number:

326160 1-gallon can (2) 326860 5-gallon can

X-Tenda Coat Classic Acrylic Coating A 100% acrylic, single-component, water-based, premium quality elastomeric coating for spray, brush, or roller application. This product is designed to provide protection for a wide range of building surfaces such as roofs, vertical walls, and masonry. It is excellent for waterproofing and restoring existing roof systems. Available in White Light Gray, Dark Gray and Tan.

Packaging: 5-gallon pail/55-gallon drum

X-Tenda Coat XTRA Silicone Coating A single-component, moisture-cured, fluid-applied silicone coating that is specially formulated to meet low-VOC requirements. Once cured, the silicone coating membrane offers excellent resistance to water intrusion, UV exposure, and natural weathering. It is excellent for waterproofing and restoring existing roof systems.

Available in White, Light Gray, Dark Gray, Tan, Santa Fe Tan, and Terra Cotta.

Packaging: 5-gallon pail/50-gallon drum

19 Product Reference Guide

Air & Vapor Barriers

VapAir Seal™ 725TR A 40-mil composite consisting of 35 mils of self-adhering rubberized asphalt laminated to a 5-mil woven polypropylene film. Used as an air and vapor barrier/ temporary roof, one-piece poly release liner prevents the material from bonding to itself in the roll and is easily removed for installation. May be used as a temporary roof for up to 120 days. Common substrates include concrete, DensDeck®, and SECUROCK®.

Coverage Rate: 325 FT²/roll

Packaging: 39" x 100'

Thickness: 40 mils

Weight: 67 lbs/roll

Product Number: 330170

Shelf Life: 12 months unopened container

SureMB 90 Base Ply and SureMB 120 Base Ply SBS-modified asphalt base sheets. Can be used in multi-ply roofing systems as an air and vapor barrier, or as a temporary roof for up to 60 days. This product is fiberglass-reinforced and meets or exceeds requirements of ASTM 6363 Type 1. When used as an air and vapor barrier, suitable substrates include concrete (primer required), DensDeck Prime, and SECUROCK.

SureMB 90 Base Ply

Coverage Rate: 150 FT²/roll (excluding lap)

Packaging: 393 ⁄8" x 49' 1"

Thickness: 90 mils

Weight: 94 lbs/roll

Product Number: 307253

Shelf Life: 12 months

SureMB 120 Base Ply

Coverage Rate: 100 sq. ft.

Packaging: 393 ⁄8" x 32' 9"

Thickness: 120 mils

Weight: 88 lbs/roll

Shelf Life: 12 months VapAir Seal MD A 15-mil composite reinforced aluminum-coated poly with a self-adhering SBS. Used as an air and vapor barrier direct to metal decking. Meets UL 1256 and FM 4470 internal fire ratings. Reinforced aluminum-coated poly stands up to the toughest roof traffic. This product’s self-healing characteristics allow for fastening penetration while maintaining IECC air leakage requirements of 0.04 cfm.

Coverage Rate: 458 FT²/roll

Packaging: 42½" x 131'

Thickness: 15 mils

Weight: 28 lbs/roll

Product Number: 321931

Shelf Life: 12 months unopened container

SureMB 90TG Base Ply and SureMB 120TG Base Ply Premium smooth-surfaced SBS torch-applied membranes reinforced with fiberglass mat. Can be used as a base ply in multi-ply systems, as an air and vapor barrier, or as a temporary roof for up to 60 days. Excellent for low temperature applications when use of peel-and-stick membranes may not be possible. Ideal substrates include primed concrete and primed SECUROCK.

SureMB 90TG Base Ply

Coverage Rate: 161 FT²/roll (excluding lap)

Packaging: 393⁄8" x 49' 1"

Thickness: 90 mils

Weight: 95 lbs/roll

Product Number: 323887

Shelf Life: 12 months unopened container

SureMB 120TG Base Ply

Coverage Rate: 100 FT²/roll (excluding lap)

Packaging: 393⁄8" x 32' 9"

Thickness: 120 mils

Weight: 88 lbs/roll

Product Number:

Shelf Life: 12 months

SureMB 70 SA Base Ply Smooth sand surface SBS (Styrene-Butadiene- Styrene) self-adhered membrane designed to be used as an air and vapor barrier and/or temporary roof (for up to 60 days).

Coverage Rate: 200 FT²/roll

Packaging: 393⁄8" x 61'

Thickness: 70 mils

Weight: 78 lbs/roll

Product Number: 335630

Shelf Life: 12 months from manufacture date when stored indoors in temperatures below 90°F (32°C)

Air & Vapor Barriers

20Edge Metal

Edge Metal

SecurEdge 200/2000 Systems Carlisle’s SecurEdge 200/2000 systems offer more than 20 different fascia, copying, and gutter systems. Fascia and copying products are ANSI/SPRI ES-1 tested and FM-approved and can be warranted for up to 30 years under Carlisle’s Golden Seal Total Roofing System Warranty. SecurEdge 200/2000 systems are available in 30 standard colors. Custom finishes and colors are available upon request.

Carlisle's SecurEdge perimeter roof edge systems are the first line of defense against wind, ensuring a polished perimeter and long-lasting protection. Carlisle's unmatched line of roof edge products are available in a range of materials, profiles, and color options to meet any project's needs.

SecurEdge 300/3000 Systems Carlisle’s SecurEdge 300/3000 systems offer more than 15 different fascia, copying, and gutter systems. Fascia and copying products are ANSI/SPRI ES-1 tested and FM-approved and can be warranted for up to 30 years under Carlisle’s Golden Seal Total Roofing System Warranty. SecurEdge 200/2000 systems are available in 30 standard colors. Custom finishes and colors are available upon request.

SecurEdge 400/4000 Systems Carlisle’s SecurEdge 400/4000 systems offer more than 10 different fascia, copying, and gutter systems. Fascia and copying products are ANSI/SPRI ES-1 tested and FM-approved and can be warranted for up to 30 years under Carlisle’s Golden Seal Total Roofing System Warranty. SecurEdge 200/2000 systems are available in 30 standard colors. Custom finishes and colors are available upon request.

Extruded Fascia Cleat Carlisle’s Extruded Fascia Cleat is a continuous .080” extruded aluminum cleat that is available in 12' lengths.

This product features pre-punched holes for fasteners spaced 12" on center and may be used with shop fabricated edge metal when Carlisle metal flat sheets are used to fabricate the cover.

Galvanized Cleat Carlisle's Galvanized Cleat options include a Drip Edge Gravel Stop Flat Copying and a Snap-On Fascia Tapered Coping. Made out of 22-gauge galvanized steel, and available in multiple sizes, these products can be included under Carlisle's Golden Seal Total Roofing System Warranty.

Sure-Weld TPO Coated Metal Sure-Weld TPO Coated Metal is a 24-gauge galvanized steel sheet that is coated with a layer of .035" non-reinforced TPO flashing. TPO membrane may be welded directly to the coated metal, eliminating the need to strip in metal with a separate piece of TPO Pressure-Sensitive Coverstrip.

Sheet Size: 4' x 10'

Quantity: � 10 or 25 sheets per pallet – White, Gray, and Tan

� 5 sheets per pallet – Patina Green, Rock Brown, Terra Cotta, Medium Bronze, and Slate Gray

Sure-Flex PVC Coated Metal Carlisle’s Sure-Flex PVC Coated Metal is a galvanized steel sheet with a laminate of non-reinforced Sure-Flex PVC flashing. Sure-Flex PVC or KEE HP membrane may be welded directly to the coated metal, eliminating the need to strip in the metal with a separate piece of membrane.

Sheet Size: 4' x 10'

Quantity: 10 sheets per pallet – White, Gray, Tan, Light Gray and Slate Gray

Kynar Coated Galvalume® Steel and Aluminum Architectural Flat Sheet Carlisle’s Kynar (PVDF) Coated Galvalume Steel and Aluminum Architectural Flat Sheet is for general sheet metal use in building applications and can be utilized for fascia panels, soffits, gravel stops, and copings.

Sheet Size: 4' x 10'

21 Product Reference Guide

Insulation Reference

Carlisle Flat EPS Engineered rigid insulation made of high-performance, water-resistant expanded polystyrene (EPS). Meets ASTM C578 requirements, includes extensive UL and FM ratings, and can be applied direct to metal decks.

Sizes: 4' x 4' or 4' x 8'; custom sizes and tapered panels available Thicknesses: 1 ⁄4" to 40" per panel Densities: 1 to 3 lb/ft3

Compressive Strength: 10 to 60psi

Carlisle HD EPS Composite High-density polyiso cover board (½") laminated to Carlisle’s engineered EPS. Five times lighter than traditional cover boards. Approved for both adhered and mechanically attached systems. Provides enhanced protection against severe weather and hail and meets Title 24 requirements for continuous insulation on combustible decks.

Sizes: 4' x 4' or 4' x 8'; custom sizes and tapered panels available Thickness: 1½" to 6" (including ½" HD polysio cover board) Densities: 1 to 3 lb/ft3

Carlisle SP EPS Premium coated-glass-faced insulation approved for mechanically attached or self-adhering systems without a slip sheet. Provides up to R-30 in a single layer.

Sizes: 4' x 4' or 4' x 8'; custom sizes and tapered panels available Thicknesses: 1 ⁄4" to 6" Densities: 1.25 to 3 lb/ft3

Carlisle Tapered EPS Tapered engineered EPS insulation available in virtually any slope. Can be combined with Carlisle polyiso for tapered hybrid roof systems. Design assistance is available from Carlisle’s Tapered Design Team. Custom saddles and crickets also available.

Slope: Virtually any slope Thickness: 1 ⁄2" to 40" Densities: 1 to 3 lb/ft3

Compressive Strength: 10 to 60psi

ChannelDry®

Carlisle’s high-performance ChannelDry insulation is composed of lightweight, closed-cell expanded polystyrene meeting the requirements of ASTM C578 Type IX. ChannelDry has excellent dimensional stability, compressive strength, and water-resistant properties. ChannelDry is designed to be mechanically fastened directly to concrete decks. The use of ChannelDry in conjunction with one-way and two-way relief vents allows the installation of the roof system to begin upon structural cure of concrete.

Sizes: 4' x 4' Thickness: 2" Compression Strength: 25psi

InsulBase NH A Living Building Challenge (LBC) “Red List Free” rigid roof insulation panel composed of a closed-cell polyisocyanurate foam core bonded on each side to fiber-reinforced paper facers. InsulBase NH contains zero halogenated flame retardants.

Sizes: 4' x 4' and 4' x 8' Thickness: ½" to 4½" Compressive Strength: 20 and 25psi

22Insulation Reference

InsulBase® Polyiso A rigid roof insulation panel composed of a closed-cell polyisocyanurate foam core bonded to glass-reinforced felt (GRF) facers. UL and FM approved for direct application over steel decks, polyiso provides the highest R-value per inch of any commercially available insulation product.

Sizes: 4' x 4' and 4' x 8' Thicknesses: ½" to 4½" Compressive Strengths: 20 and 25psi

RapidLock Polyiso InsulBase RL® and SecurShield RL are standard density polyisocyanurate roof boards specially designed to act as the hook in the RapidLock (hook and loop) system.

InsulBase RL utilizes a GRF facer and SecurShield RL a CGF facer.

SecurShield HD RL is a high-density rigid roof polyisocyanurate board bonded to coated-glass (CGF) facers.

InsulBase RL and SecurShield RL Size: 4' x 8' Thickness: 2.0" and 2.6" Compressive Strengths: 20psi

SecurShield HD RL Size: 4' x 8' Thickness: 0.5" Compressive Strength: 109psi max

InsulBase HD A rigid-roof insulation cover board composed of a high-density closed-cell polyisocyanurate foam core bonded to glass-reinforced felt (GRF) facers. InsulBase HD is specifically designed for use as a cover board in mechanically-attached systems only.

Sizes: 4' x 4' and 4' x 8' Thicknesses: ½" Compressive Strengths: 109psi max

SecurShield®

A rigid roof insulation panel composed of a closed-cell polyisocyanurate foam core bonded to high performance coated glass facers (CGF). ReadyFlash features a dark CGF to accelerate adhesive flash-off on one side of the insulation board and a light CGF to slow down adhesive flash-off on the other. Ideal for use in adhered membrane systems. Provides a direct to combustible deck UL Class A fire rating at 1" thickness.

Sizes: 4' x 4' and 4' x 8' Thicknesses: ½" to 41 ⁄2" Compressive Strengths: 20 and 25psi

SecurShield HD A rigid roof insulation panel composed of ½" high-density, closed-cell polyisocyanurate foam core bonded to a premium performance coated glass facer (CGF) specifically designed for use as a cover board.

ReadyFlash features a dark CGF to accelerate adhesive flash-off on one side of the insulation board and a light CGF to slow down adhesive flash-off on the other.

Provides 5 times the R-value at one-fifth the weight of traditional gypsum cover boards. Achieves a UL Class A fire rating direct to combustible deck.

Sizes: 4' x 4' and 4' x 8' Thickness: ½" Compressive Strength: 109psi max

R-Tech® Fanfold Recover Board High-performance water-resistant facers laminated to Carlisle engineered EPS. Code-approved for recover applications and compatible with both light- and dark-colored single-ply membranes. Five times lighter than traditional cover boards with a coverage rate of 200

sq. ft. per piece. Saves time and labor on the roof.

Sizes: 2' x 4' (folded), 4' x 50' (unfolded) Thicknesses: 3 ⁄8", 1 ⁄2", 3 ⁄4"

Insulation Reference

23 Product Reference Guide

Tapered Accessories Hinged Target Sumps and Pre-Cut Hips and Valleys ship ready to install, require no field cuts and save valuable time on the roof. Multiple thicknesses and slopes available to accommodate specific job conditions with no waste, thus reducing disposal fees.

Sizes: 4' x 4' (Hips & Valleys) and 8' x 8' (Hinged Sumps) Thicknesses: ½" to 4½" (multiple layers utilized for increased thicknesses) Compressive Strengths: 20 and 25psi

Tapered Polyiso A sloped, rigid roof insulation panel composed of a closed-cell polyisocyanurate foam core bonded to a coated glass or fiber-reinforced facer.

Designed to promote positive drainage and prevent ponding water.

Sizes: 4' x 4' Thicknesses: ½" to 4½" (multiple layers utilized for increased thicknesses) Compressive Strengths: 20 and 25psi

StormBase® Polyiso A rigid roof insulation composite panel composed of a closed-cell polyisocyanurate foam core bonded to a glass-reinforced felt (GRF) facer on one side and 7 ⁄16" oriented strand board (OSB) on the other.

Sizes: 4' x 4' (routed 3 sides) and 4' x 8' (routed 4 sides) Thicknesses: 1½" to 4½" Standard Thickness: 1½", 2", 2½", 3", and 4"

SecurShield HD Plus A rigid roof insulation panel composed of a ½" high-density, closed-cell polyisocyanurate foam core bonded to premium-performance coated glass facers (CGF). SecurShield HD Plus is specifically designed for use as a cover board. Provides an FM 1-90 wind uplift rating with only 8 fasteners per 4' x 8' board.

Sizes: 4' x 4' and 4' x 8' Thicknesses: ½" Compressive Strengths: 109psi max

SecurShield HD Composite A unique composite insulation panel comprised of ½" high-density polyiso cover board bonded during the manufacturing process to SecurShield rigid polyiso roofing insulation. Eliminates the need for a separate cover board, reduces inter-ply adhesives and saves labor on the roof. A single product solution.

Sizes: 4' x 4' and 4' x 8' Thicknesses: 1½" to 4½" Compressive Strengths: 20 psi (SecurShield base layer) and 109psi max (SecurShield HD cover board)

SecurShield NH A Living Building Challenge (LBC) “Red List Free” rigid roof insulation panel composed of a closed-cell polyisocyanurate foam core bonded on each side to premium performance coated glass facers (CGF).

SecurShield NH contains zero halogenated flame retardants.

Sizes: 4' x 4' and 4' x 8' Thickness: ½" to 4" Compressive Strength: 20psi

24EPDM Systems Reference

EPDM Systems Reference

BALLASTED ADHERED MECHANICALLY

FASTENED FLEECEBACK AFX COVERAGE RATE OR

AVAILABLE SIZES PACKAGING

MEMBRANES

Sure-Seal Non- Reinforced EPDM 45, 60, 90-mil 10' – 50' x 50' – 200'

Sure-Seal SAT (Self-Adhering Technology) Non-Reinforced EPDM 60-mil 10' x 50' or 10' x 100'

Sure-White Non-Reinforced White EPDM 60, 90-mil 10', 16.5' or 20' x 100'

Sure-White SAT (Self-Adhering Technology) Non-Reinforced EPDM 60-mil 10' x 50' or 10' x 100'

Sure-White Reinforced EPDM 60-mil 10' x 100'

Sure-Tough Reinforced EPDM 45, 60, 75-mil 5', 6.5', 8 or 10' x 100'

Sure-Tough SAT (Self-Adhering Technology) Reinforced EPDM 60-mil 10' x 50' or 10' x 100'

Sure-Seal Non-Reinforced EPDM 60-mil, 90-mil 7' – 50' x 50' – 200'

Sure-Tough Reinforced EPDM 60-mil, 75-mil 6.5' – 10' x 50' – 100' per roll

Sure-Seal FleeceBACK EPDM 100-mil, 115-mil, 145-mil 5' x 40', 10' x 50', 10' x 100'

Sure-White FleeceBACK EPDM 100-mil, 115-mil, 145-mil 5' x 40', 10' x 50', 10' x 100'

Sure-Seal FleeceBACK AFX EPDM 90-mil, 105-mil 4' .5" x 50', 10' x 50', 10' x 100'

Sure-White FleeceBACK AFX EPDM 105-mil 4' .5" x 50'

FleeceBACK RL™ EPDM 115-mil 10' x 50', 10' x 100'

ADHESIVES, PRIMERS, & SEALANTS

Low-VOC Primer * 250 sq. ft. per gallon (dusty membrane)

(6) 1-gallon cans per case

HP-250 Primer * 250 sq. ft. per gallon (dusty membrane)

(6) 1-gallon cans per case

90-8-30A EPDM Bonding Adhesive 60 sq. ft. per gallon 5-gallon pail

Flexible FAST Adhesive See PDS Multiple

Aqua Base 120 Bonding Adhesive 100 – 120 sq. ft. per gallon 5-gallon pail

Cold Applied Adhesive 67 sq. ft. per gallon 5-gallon pail

EPDM X-23 Low-VOC Bonding Adhesive 60 sq. ft. per gallon 5-gallon pail

Low-VOC Bonding Adhesive 60 sq. ft. per gallon 5-gallon pail

Sure-Seal Lap Sealant 22' per tube 25 tubes per carton

Sure-White Lap Sealant 22' per tube 25 tubes per carton

One-Part Pourable Sealer (Black/White) 488 in3 per gallon (4) ½-gallon pouches/bucket

Weathered Membrane Cleaner 400 sq. ft. per gallon

(2) 1-gallon cans or

(1) 5-gallon pail

Water Cut-Off Mastic 10' per tube 25 tubes per carton

Pressure-Sensitive SecurTAPE 3" x 100', 6" x 100' 3" – 4 rolls per carton, 6" – 2 rolls per carton

CAV-GRIP III

Wall Attachment Only

See Product Data Sheet 40# aerosol cylinder 85# aerosol cylinder

* Available in CAV-PRIME pressurized cylinders.

25 Product Reference Guide

BALLASTED ADHERED MECHANICALLY

FASTENED FLEECEBACK AFX COVERAGE RATE OR

AVAILABLE SIZES PACKAGING

FLASHINGS

Pressure-Sensitive Elastoform Flashing (Black/White)

6" x 100', 9" x 50', 12" x 50"

6" – 2 rolls per carton 9" & 12" – 1 roll per carton

Pressure-Sensitive Cured Coverstrip (Black/White)

6" x 100', 9" x 100', 12" x 50'

6" – 2 rolls per carton 9" & 12" – 1 roll per carton

Pressure-Sensitive Overlayment Strip (Black) 6" x 100', 9" x 100'

6" – 2 rolls per carton 9" – 1 roll per carton

Pressure-Sensitive RUSS (Black/White) 6" x 100' , 9" x 100' 6" – 2 rolls per carton 9" – 1 roll per carton

Pressure-Sensitive Pipe Seals (Black/White) ½" – 3", 1" – 6" 10 per carton

Pressure-Sensitive Pourable Sealer Pockets (Black/White)

Black – 4", 6", 8" White – 6" only

12 per carton

Pressure-Sensitive Inside/ Outside Corners (Black/White) 7" x 9" 20 per carton

Pressure-Sensitive Curb Flashing (Black/White)

20" x 50', with 6" tape

1 roll per carton

Fully Pressure-Sensitive Curb Flashing (Black) 20" x 50' 1 roll per carton

Pressure-Sensitive T-Joint Covers (Black) 6" & 12" 20 per carton

Pipe Supports Mini: ½" – 1½" Small: ¾" – 2"

Large: 2½" – 5"

Mini & small 20 per carton; large 10 per carton

ACCESSORIES

Pressure-Sensitive Molded Walkway Pads (Black/White) 30" x 30" 50/pallet

Interlocking Rubber Pavers (Black/TerraCotta) 24" x 24" Single paver

HP Protective Mat 15' x 300' Per roll

EPDM Expansion Joint-Edge 25 ft. 25 LF per carton

EPDM Expansion Joint-Field 25 ft. 25 LF per carton

EPDM Systems Reference

26TPO Systems Reference

TPO Systems Reference

MECHANICALLY

FASTENED ADHERED FLEECEBACK AFX COVERAGE RATE

OR AVAILABLE SIZES PACKAGING

MEMBRANES

Sure-Weld TPO** 45-mil, 60-mil, 80-mil 4', 6', 8', 10', and 12' x

100' roll

Sure-Weld SAT (Self-Adhering Technology) TPO** White, Gray & Tan: 60-mil

White: 80-mil

Sure-Weld FleeceBACK TPO 100-mil, 115-mil, 135-mil 6' x 100', 12' x 75', 6' x 75', 12' x 50', 12' x 100'

Sure-Weld FleeceBACK AFX TPO 120-mil, 135-mil, 155-mil 6' x 75', 12' x 75'

FleeceBACK RL TPO 115-mil 10' x 50', 10' x 100'

ADHESIVES, PRIMERS, & SEALANTS

Sure-Weld Bonding Adhesive 60 sq. ft. per gallon 5-gallon pail

CAV-GRIP III Adhesive/Primer Wall Attachment

Only

See Product Data Sheet

40# aerosol cylinder

85# aerosol cylinder

Aqua Base 120 Bonding Adhesive 100 – 120 sq. ft. per gallon 5-gallon pail

Flexible FAST Adhesive See Product Data Sheet Multiple

Low-VOC Bonding Adhesive 60 sq. ft. per gallon 5-gallon pail

Weathered Membrane Cleaner 400 sq. ft. per gallon 1-gallon or 5-gallon pail

Cold Applied Adhesive 50 – 67 sq. ft. per gallon 5-gallon pail

White One-Part Sealant 122 cubic inches per .5 gallon (4) ½-gallon pouches/bucket

TPO Primer (Standard and Low-VOC)* 200 to 250 sq. ft. per gallon (6) 1-gallon cans/carton

TPO Clear Cut Edge Sealant 225 linear ft. per bottle 6 bottles per carton

Universal Single-Ply Sealant 25 ft. per tube (½" bead) 24 tubes, 10.1 fl. oz. each

FLASHINGS

TPO Molded Pipe Seals (White/Gray/Tan) ¾" to 8" 8 per carton

TPO PS Coverstrip 6" x 100' (White/Gray/Tan) 6" x 100' 2 rolls per carton

TPO Non-Reinforced Flashing (White/Gray/Tan) 12" x 50' & 24" x 50' 1 per carton

TPO Split Pipe Seals (White/Gray/Tan) 1" to 6" 8 per box

TPO Square Tubing Wraps (White/Gray/Tan) 3", 4", 5", 6" 8 per box

TPO Inside Corners (White/Gray/Tan) 12 per bag

TPO Outside Corners (White/Gray/Tan) 12 per bag

TPO Universal Corners (White/Gray/Tan) 20 per box

TPO Curb Wrap Corners (White) 7", 13", 19” 12 per box

TPO Molded Sealant Pockets (White/Gray/Tan) 7.5" to 11" x 6" oval 5 per carton

TPO Sealant Pocket Extensions (White) 14" overall length; 10" installed length

10 per carton

6" TPO PS RUSS 6" x 100' 2 rolls

10" TPO PS RUSS 10" x 100' 1 roll

TPO T-Joint Covers (White/Gray/Tan) 4.5" diameter 100 per box

*Available in CAV-PRIME pressurized cylinders.

**Carlisle's Sure-Weld TPO membranes available with APEEL Protective Film.

27 Product Reference Guide

TPO Systems Reference

MECHANICALLY

FASTENED ADHERED FLEECEBACK AFX COVERAGE RATE

OR AVAILABLE SIZES PACKAGING

ACCESSORIES

TPO Walkway Rolls (White/Gray/Tan) 34" x 50' roll Per roll

TPO Crossgrip Walkway (White/Gray/Tan) 3' x 33' (.91m x 10.1m)

TPO Coated Metal (White, Gray, Tan, Slate Gray, Patina Green, Terra Cotta, Medium Bronze, Rock Brown)

4' x 10' 10 or 25 per skid

FASTENERS

Insulfast Insulation Fasteners 15/8" to 8" 1000 per package

3" Steel Insulation Plate 3" diameter 1000 per package

HP Fasteners (Insulation) 1¼" to 15" 500 – 1000 per package

HP-X Fasteners (Membrane) 2" to 22" 500 – 1000 per package

HP-X ASAP Fasteners (Membrane) 2" to 16" 150 to 250 per package

Piranha Plates 23/8" 1000 per package

HP-XTRA Fasteners (Steel Deck Only) 2" to 12" 250 – 500 per bucket

TPO RhinoBond Plates 3" diameter 500 per package

PVC RhinoBond Plates 3" diameter 500 per package

28PVC Systems Reference

PVC Systems Reference

MECHANICALLY

FASTENED ADHERED FLEECEBACK COVERAGE RATE

OR AVAILABLE SIZES PACKAGING

MEMBRANES

Sure-Flex PVC*** 50-mil, 60-mil 80-mil

40.5", 5', 81", and 10' x 100' 40.5", 5', 81", and 10' x 75'

Sure-Flex KEE HP*** 50-mil, 60-mil 80-mil

40.5", 5', 81", and 10' x 100' 40.5", 5', 81", and 10' x 75'

Sure-Flex PVC FleeceBACK 115-mil 135-mil

10' x 100' 10' x 75'

Sure-Flex KEE HP FleeceBACK 105-mil, 115-mil 135-mil

10' x 100' 10' x 75'

FleeceBACK RL PVC 115-mil 10' x 50', and 10' x 100'

ADHESIVES, PRIMERS, & SEALANTS

CAV-GRIP PVC Adhesive Wall Attachment Only

Standard – 750 sq. ft.

Large – 1,500 sq. ft.

41# aerosol cylinder 90# aerosol cylinder

Low-VOC PVC Bonding Adhesive 60 sq. ft. per gallon 5-gallon pail

HydroBond PVC Water-Based Adhesive 100 and 135 sq. ft. per gallon 5-gallon pail

Flexible FAST Adhesive See PDS…