UJTS RFI August 2025.pdf

Ser. 25-0001/UJTS

REQUEST FOR INFORMATION FOR

UNDERGRADUATE JET TRAINING SYSTEM (UJTS)

FIELDING

Prepared for and by:

DEPARTMENT OF THE NAVY PROGRAM EXECUTIVE OFFICE

PMA-273 NAVAL AIR SYSTEMS COMMAND

Patuxent River, MD 20670

28 August 2025

DISTRIBUTION STATEMENT A: Approved for public release: distribution unlimited.

1 DESCRIPTION

This Release of Information and Request for Information (RFI), Serial Number 25-0001/UJTS, is a continuation of on-going communication in support of the Undergraduate Jet Training System (UJTS) program. For further background, reference should be made to Request for Information postings under 25-0001.

1.1 Undergraduate Jet Training System Overview

The UJTS program has two overarching goals: (1) Speed to Initial Operational Capability (IOC) and (2) Quality of Training. The UJTS program is on an accelerated procurement timeline to release a Request for Proposal (RFP) by December 2025 with a projected Contract Award in January 2027. The RFP will be for the Engineering, Manufacturing, and Development (EMD) of the UJTS solution as well as the Procurement of the first lot of Low Rate Initial Production (LRIP) aircraft and limited quantities of ground-based training systems.

The Government is releasing Draft solicitation documents as they become available to seek industry input.

1.2 This is a Request for Information Only

This market research is for information gathering and/or internal planning purposes only. This RFI does NOT constitute an Invitation for Bid (IFB), a Request for Proposal (RFP), a Request for Quote (RFQ), nor is it a promise to issue an RFP in the future or an indication that the Government will contract for any of the items and/or services contained in this notice. This RFI does not commit the Government to award a contract as a result of this announcement. No solicitation documents exist at this time. Thus, at this time, the Navy is NOT seeking proposals and will NOT accept unsolicited proposals. Respondents are advised that the Government will NOT pay for any information or administrative costs incurred in response to this RFI.

2 SPECIFIC ITEMS OF INTEREST

References:

A. Draft UJTS Air Vehicle Weapon System Specification (WSS) (CUI) B. Draft UJTS Ground Based Training Systems WSS (CUI) C. Draft UJTS EMD Statement of Work (SOW) (CUI) D. Draft UJTS LRIP Statement of Work (SOW) (CUI) E. Draft UJTS Interim Contractor Logistics Support (CUI) F. Draft Section H Clauses (CUI) G. Draft outline of Sections L&M (CUI)

Artificial Intelligence (AI)

The Government requests industry to describe how it evaluates its AI solutions and which metrics are used (e.g., prompt/feedback response time, latency).

Air Vehicle Weapon System Specification (WSS) Industry Review & Input

The Government requests industry input on the revised Draft Air Vehicle WSS, Reference (A).

The Government requests that reviewers add information directly in the spreadsheet briefly describing the modifications to any existing designs that would be required to satisfy the requirement.

The Government may add, modify, and delete requirements as UJTS capabilities are refined and in response to industry input.

GBTS Weapon System Specification (WSS) Industry Review & Input

The Government requests industry input on the revised Draft GBTS WSS, Reference (B). The Government requests that reviewers add information directly in the spreadsheet briefly describing the modifications to any existing designs that would be required to satisfy the requirement.

The Government may add, modify, and delete requirements as UJTS capabilities are refined and in response to industry input.

Draft SOW Industry Review & Input

The Government requests industry input on the Draft SOWs, Reference (C), (D), and (E).

The Government may add, modify, and delete SOW requirements as the UJTS program is refined and in response to industry input.

Any Sections marked RESERVED are still in development.

Draft Section H Clauses Industry Review & Input

The Government requests industry input on the Draft Section H Clauses Reference (F), which may be modified or deleted prior to solicitation release.

Draft Sections L&M Outline Industry Review & Input

The Government requests industry input on the Draft Sections L&M outline, Reference (G).

Sections L&M will be released with the Draft RFP.

NAVAIR Conflict of Interest Clauses

Industry is reminded of the following new NAVAIR Clauses, which were presented at the Industry Day Kickoff in April 2025. As required in the clauses, offerors have the responsibly to disclose actual or potential conflicts of interests for the offeror (including subcontractors) OR for any other offeror or potential offeror that they have knowledge of.

Compliance with the clause will be reviewed by the PCO and if the determination is made that the offeror has not complied, the offeror may be found to be not responsible and therefore ineligible for award.

KTXT.209-9511 CONFLICT OF INTEREST REPRESENTATION (NAVAIR) (FEB 2025)

(a) This solicitation contains conflict of interest disclosure requirements to maintain the integrity of the source selection.

(1) Subparts 9.5 and 3.1 of the Federal Acquisition Regulation (FAR) prohibit organizational and personal conflicts of interest in Government procurements and establish the following principle:

“Government business shall be conducted in a manner above reproach. . . . The general rule is to avoid strictly any conflict of interest or even the appearance of a conflict of interest in Government contractor relationships.” FAR 3.101-1.

(2) Actual or potential conflicts of interest may arise, among other circumstances, when an Offeror has or may have unequal access to nonpublic information relevant to the solicitation or when a current or former Government employee may be negotiating for employment or be employed by an Offeror or any of an Offeror’s subcontractors, partners, or affiliates. Unequal access may occur through communications (e.g., verbal, written, or electronic means) with current or former Government employees or through current or previous contracts that the Offeror or its subcontractors, partners, or affiliates have or had with the Government.

(b) Conflicts of Interest Prior to the Receipt of Proposals. Prior to and commensurate with the due date for receipt of proposals, the offeror shall comply as follows. Consistent with FAR Subparts 9.5 and 3.1 and as applicable to this solicitation, if the Offeror identifies for itself (or any of its subcontractors, partners, or affiliates); or has information that any other Offeror/potential Offeror has or may have an actual or potential conflict of interest, the Offeror shall check the appropriate box(es) below and shall include the supplemental information required per paragraph (d) of this text. Otherwise, the Offeror must affirmatively represent that no such actual or potential conflicts of interest are known or should have been known commensurate with the due date for receipt of proposals.

[ ] Actual or potential conflicts of interest for the Offeror are being disclosed; and/or

[ ] Actual or potential conflicts of interest for another Offeror/potential Offeror are being disclosed; or

[ ] There are no actual or potential conflicts of interest to disclose.

(c) Conflicts of Interest After the Receipt of Proposals. After the due date for receipt of proposals, the offeror shall comply as follows. Consistent with FAR Subparts 9.5 and 3.1 and as applicable to this solicitation, if the offeror identifies for itself (or any of its subcontractors, partners, or affiliates); or has information that any other Offeror/potential Offeror has or may have an actual or potential conflict of interest , the Offeror shall within 3 business days of conflict identification provide the Contracting Officer an updated representation by checking the appropriate box(es) below and shall include the supplemental information required per paragraph

(d) of this text.

[ ] Actual or potential conflicts of interest for the Offeror are being disclosed; and/or

[ ] Actual or potential conflicts of interest for another Offeror/potential Offeror are being disclosed

(d) If the Offeror represents that there are actual or potential conflicts of interest pursuant to either paragraph (b) or paragraph (c), see LTXT.209-9512 for additional requirements.

(e) The Offeror’s compliance with the representation requirements of paragraphs (b) and (c) will be reviewed as part of the Contracting Officer’s responsibility determination and will not be considered as part of the evaluation conducted per Section M. If the Contracting Officer determines that the Offeror has not complied with the above representation requirements, then the Offeror may be found to be not responsible and therefore ineligible for award in accordance with the best interests of the Government.

LTXT.209-9512 CONFLICT OF INTEREST REQUIREMENTS (NAVAIR) (FEB 2025)

(a) Any time the Offeror represents that there is an actual or potential conflict of interest per KTXT.209-9511 either for itself (or any of its subcontractors, partners, or affiliates) or other Offerors or potential Offerors, the Offeror shall submit information detailing the actual or potential conflict. There is no page limitation on this information.

(b) Any time the Offeror represents that there is an actual or potential conflict of interest for itself (or any of its subcontractors, partners, or affiliates) per KTXT.209-9511, Conflict of Interest Representation, the Offeror shall also submit a mitigation plan. The mitigation plan shall, at a minimum, identify the conflicted party/parties, provide salient facts, provide an analysis of the actual or potential conflict of interest, and recommend an approach to neutralize, mitigate, or avoid the actual or potential conflict. There is no page limitation on the conflict of interest mitigation plan.

(c) The actual or potential conflict of interest and the Offeror’s proposed mitigation plan, if applicable, will be reviewed as part of the Contracting Officer’s responsibility determination and will not be considered as part of the evaluation conducted per Section M. If the Contracting Officer determines that the conflict of interest cannot be neutralized, mitigated, or avoided such that the integrity of the procurement is maintained, then the conflicted Offeror may be deemed ineligible for award.

(d) The Offeror’s mitigation plan may be submitted at any time prior to the due date for receipt of proposals and, if not provided in advance, shall be submitted no later than the due date for receipt of proposals. If the Offeror provides an updated KTXT.209-9511 representation after the due date for receipt of proposals, the Offeror’s mitigation plan shall be submitted concurrently with the submission of the updated representation.

Draft Solicitation Reference Documents

The following documents are available as a consolidated Reference Documents zip file upon request to the PCO and Contract Specialist identified in the Respondent Instructions paragraph of this RFI.

Public Release Documents:

ADS-B Out Functional Requirements Document

ASD-S1000D

COMNAVFORINST 4790.2E

NAVAIR 00-25-403

NAVAIR 00-25-406

NAVAIR 01-1B-50

NAVAIRHQ 13600.1A

NAVAIRHQ 4200.56

NAVAIRHQ 4355.19E

NAVAIRINST 13050.7

NAVAIRINST 2400.1B

NAVAIRINST 3080.1

NAVAIRINST 3710.9F

NAVAIRINST 3905.1A

NAVAIRINST 3960.2E

NAVAIRINST 3960.4D

NAVAIARINST 5100.3H

NAVAIRINST 5720.10A

NAVAIR Standard Interactive Electronic Technical Manual Viewer V3.2.14 NAVAIR Aviation Hazardous Materials List (AHML)

BUMEDINST 6270.8C

NAVAIRHQ M-3700.4A

NAVAIRINST 13700.15G CH-1

S0300-BU-GYD-010

2025-005 UJTS Lighting Requirements NAVAIR 17-35NCE-1 (calibration doc) NAVAIR 17-QAC-01 (calibration doc) NAVAIR Support Equipment Management Systems AUTOSERD handbook (& zip file instructions)

CUI Documents:

NAVAIR-00-80T-213

Performance Based Navigation Specification PMA273 Configuration Management Plan PMA273 Risk, Issue and Opportunity Management Plan PMA273 Cyber Security Plan (RFP Version) Technical Data Package Option Selection Worksheet Commercial Item Determination and Government Rights to Technical Data Option Selection Worksheet TDP Drawings Metadata Format Technical Manual Contract Requirement (O Level) Technical Manual Contract Requirement (I and D Level)

3 RFI RESPONDENT INSTRUCTIONS

- References A through G are Controlled Unclassified Information and cannot be published on www.sam.gov. Please contact the PCO and Contract Specialist for additional vetting to receive the documents.

o Procuring Contracting Officer: Thomas Conrow thomas.w.conrow.civ@us.navy.mil o Contract Specialist: Brandon Rider brandon.f.rider.civ@us.navy.mil

- Requests initial responses to this RFI should be submitted no later than 15 September 2025 1700 Eastern Standard Time (EST). Additional responses after 15 September will be considered.

- Responses should be submitted electronically via email to:

o Procuring Contracting Officer – Thomas Conrow thomas.w.conrow.civ@us.navy.mil o Contract Specialist: Brandon Rider brandon.f.rider.civ@us.navy.mil

- Large files, up to 8.0 GB, may be delivered via DoD Secure Access File Exchange

(SAFE). Delivery of DoD SAFE Files should be coordinated with the PCO.

- Proprietary information should be clearly marked. It is the responsibility of respondents to clearly mark submitted information with appropriate restrictive markings. The Government shall not be liable for any proprietary information not properly identified.

Any materials submitted in accordance with this RFI which contain information that is marked as proprietary will be protected as proprietary information.

- No classified documents shall be included in the response.

- Information submitted in response to the RFI will not be returned and becomes the property of the U.S. Government (except properly marked proprietary information).

- Data submitted in response to this questionnaire will be distributed and discussed within the Government.

- The electronic copy of your response must be in Microsoft Office 2016 or Adobe Acrobat readable formats.

- Respondents should provide identifying contact information, to include:

o Company Name and address o Name, title, telephone number, fax number, and e-mail address of point of contact o CAGE Code and Unique Entity Identifier (UEID) o An inventory list of all response files/elements which allow the Government to determine that the complete response has been received o If your company is not the manufacturer of the aircraft being described, please identify the manufacturer and identify your relationship with the manufacturer

- Questions regarding this RFI should be directed to the Procuring Contracting Officer, via email, at thomas.w.conrow.civ@us.navy.mil or the Contract Specialist, via email, at brandon.f.rider.civ@us.navy.mil http://www.sam.gov/ mailto:thomas.w.conrow.civ@us.navy.mil mailto:brandon.f.rider.civ@us.navy.mil mailto:thomas.w.conrow.civ@us.navy.mil mailto:brandon.f.rider.civ@us.navy.mil mailto:thomas.w.conrow.civ@us.navy.mil mailto:brandon.f.rider.civ@us.navy.mil

28 August 2025