2425301_Revised_Electrical_Drawings_111825_Signe.pdf
PDF 3 MB Posted
- Solicitation number
- 26-10
- Issued by
- Glades County, Florida
About this file
This file contains revised electrical drawings for a Special Needs Shelter Retrofit project at Gadsden County Community Hospital, located at 3186 Blue Star Highway in Quincy, Florida, prepared by Baker Design Build, LLC with consulting engineering by Simes & Rosch, LLC. The drawings are dated November 18, 2025 (Revision 1) and include electrical design specifications for the retrofit work. The project involves providing a complete electrical system including temporary electric service for construction, permanent building service entrance equipment, underground conduit and feeder distribution, interior panelboards, an automatic transfer switch rated at 600A/480V, surge suppression devices, and coordination with the local electric utility (City of Quincy Utilities). The electrical contractor is responsible for all trench excavation, pumping, backfilling, and compaction for underground work, along with applying for and obtaining all required permits and inspection certificates. The design establishes a 600A service entrance with future provisions for a 300 kW permanent diesel generator and includes multiple panelboards and circuit schedules designed to support future loads including lighting, HVAC systems, and miscellaneous building loads with a total demand load of 244.4 kVA.
All electrical work must comply with the National Electrical Code, National Electric Safety Code, NECA Standards, Florida Building Code, OSHA standards, NFPA 70E requirements, and local municipal codes, with the more stringent requirements controlling in cases of conflict. The contractor must use only copper building wire with appropriate insulation, size all conductors and conduit per the power riser diagram, and properly ground and bond the electrical system to a maximum resistance of 10 ohms. All materials must be listed and labeled by a nationally recognized testing laboratory (NRTL) such as UL. Shop drawings and catalog data for service equipment, panelboards, wire, conduit, and surge suppression devices must be submitted as a single package for approval. The engineer's study recommends upgrading the electrical distribution system to a permanent emergency generator with a separate branch circuit and transfer switch meeting ICC 500 and NEC Article 700 requirements as soon as possible to ensure compliance with emergency shelter standards.
View the file
Other files
Show 40 more
50 files listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
RevisionDate
Sheet Name
Sheet Number
Project Number
24-0121
No.
REVISIONS
Drawn By:
Check By:
Approved By:
Date:
G A
D S
D E
N C
O U
N T
Y R
E T
R O
F
IT
S H
E L
T E
R D
E S
IG
N
BL
U E
ST
A
R H
IG
H
W A
Y
Q U
IN
CY
, F L
G A
D
SD
EN
C
O U
N
TY
BO
A
RD
O
F
CO
U N
TY
C
O M
M
IS
SI
O
N
ER
S
D E
S
IG
N E
R E
X P
R E
S S
LY
R
E S
E R
V E
S T
H E
C O
P Y
R
IG
H T
A N
D O
TH
E
R P
R O
P E
R
TY
R
IG
H
TS
W
IT
H
IN
T H
E S
E D
R A
W
IN
G S
TH
E S
E P
LA
N
S , D
E S
IG
N
S A
N D
D R
A W
IN
G
S A
R E
N O
T
TO
B E
R E
P R
O D
U C
E D
, C O
P
IE
D O
R U
S E
D
IN
A N
Y M
A N
N E
R W
IT
H
O U
T E
X P
R E
S S
E D
W R
IT
TE
N C
O N
S E
N T
O F
B A
K E
R D
E S
IG
N
B U
IL
D
, L
LC
TH
E S
E P
LA
N
S S
H A
LL
N
O T
B E
D
IS
TR
IB
U
TE
D T
O A
N Y
P A
R
TY
W
IT
H O
U T
S A
ID
W
R
IT
TE
N
C O
N S
E N
T.
N . N ew na n St re et
, 2 nd
F lo or , J ac ks on vi lle F
L p f b ak er de si gn .b ui ld
C .A
. N o
. 3
1 5.31.24 60% SUBMITTAL
E n g in e e r in g
Si m es
R os ch , L
L C
C O
N
SU
LT
IN
G E
N G
IN
E
E R
S
F ul le rt on
S tr ee t, Su ite
Ja ck so nv ill e, F L
Ph
4)
-3
F ax
4)
-9
FL
. C er t.
of A ut h.
7R S
2 6.11.24 PERMIT ISSUE
F L O R I D A
PROFES ENGIN
EE
512 49N o.
LICE ENS
R
SIONAL
STAT E O F
DAVI IMESD W.S
DWS
DWS
05.31.24
ELECTRICAL
LEGEND &
GENERAL NOTES
E1.1
PROJECT GENERAL NOTES:LEGEND:
ABBREVIATIONS:
AutoCAD SHX Text 06/11/24
AutoCAD SHX Text
DAVID W. SIMES
AutoCAD SHX Text
FL PE #51249
AutoCAD SHX Text
1. THE ELECTRICAL CONTRACTOR SHALL PROVIDE THE ELECTRICAL THE ELECTRICAL CONTRACTOR SHALL PROVIDE THE ELECTRICAL PORTION OF THE PROJECT. THIS INCLUDES, BUT IS NOT LIMITED TO: TEMPORARY ELECTRIC SERVICE AND DISTRIBUTION FOR CONSTRUCTION PURPOSES; PERMANENT BUILDING SERVICE ENTRANCE EQUIPMENT AND FEEDER DISTRIBUTION; TRENCH EXCAVATION, PUMPING, BACKFILLING AND COMPACTION FOR ALL UNDERGROUND ELECTRICAL WORK; BUILDING INTERIOR PANELBOARD; AUTOMATIC TRANSFER SWITCH; SURGE SUPPRESSION DEVICE; EMPTY CONDUITS FOR FUTURE USE; AND COORDINATION WITH THE ELECTRIC UTILITY, OTHER CONTRACTORS, THE ENGINEER AND OWNER. 2. FOR THE PURPOSES OF THIS CONTRACT, THE TERM "PROVIDE" SHALL MEAN TO PROVIDE ALL LABOR, MATERIAL, EQUIPMENT, TRANSPORTATION, AND SUPERVISION REQUIRED TO FURNISH AND INSTALL. 3. APPLY FOR, OBTAIN, AND PAY FOR ALL REQUIRED PERMITS AND INSPECTION CERTIFICATES, AND PAY FOR ALL FEES ASSOCIATED WITH ESTABLISHING ELECTRIC SERVICE. 4. THE NATIONAL ELECTRICAL CODE, NATIONAL ELECTRIC SAFETY CODE, NECA STANDARD OF INSTALLATION, AND FLORIDA BUILDING CODE, EDITIONS ADOPTED BY AHJ, SHALL ESTABLISH THE MINIMUM REQUIREMENTS FOR INSTALLATION, BUT IN ADDITION, ALL WORK SHALL ALSO COMPLY WITH OSHA, STATE, COUNTY, LOCAL OR MUNICIPAL CODE REQUIREMENTS AND THE RULES OF THE LOCAL ELECTRIC UTILITY. IN CASE OF CONFLICTS, CONFORM TO THE MORE STRINGENT REQUIREMENTS. TO THE BEST OF THE ENGINEER'S KNOWLEDGE, THESE PLANS AND SPECIFICATIONS COMPLY WITH THE APPLICABLE MINIMUM BUILDING CODES AND THE APPLICABLE FIRE-SAFETY STANDARDS AS DETERMINED BY THE LOCAL AUTHORITY IN ACCORDANCE WITH SECTION 110 OF THE FLORIDA BUILDING CODE AND CHAPTERS 533 AND 633 OF THE FLORIDA STATUTES. IN CASES OF CONFLICTS BETWEEN THESE DESIGN DOCUMENTS AND REQUIREMENTS OF ANY OF THE ABOVE CRITERIA, CONTACT THE ENGINEER BEFORE PROCEEDING. 5. ALL MATERIALS USED IN THIS PROJECT SHALL BE LISTED AND LABELED BY A NATIONALLY RECOGNIZED TESTING LAB (NRTL) (I.E. U.L.), UNLESS NOTED OTHERWISE. 6. SUBMIT SHOP DRAWINGS, CATALOG SHEETS, OR OTHER DESCRIPTIVE DATA WITH SUFFICIENT INFORMATION TO ESTABLISH DESIGN, QUALITY AND PERFORMANCE. SUBMIT DATA FOR: SERVICE EQUIPMENT, PANELBOARDS, WIRE, CONDUIT, AND SURGE SUPPRESSION DEVICE. PROVIDE SUBMITTALS AS A SINGLE PACKAGE. 7. PROVIDE EQUIPMENT NAMEPLATES FOR ALL EQUIPMENT, INCLUDING SERVICE EQUIPMENT, PANELBOARD. AND AUTOMATIC TRANSFER SWITCH. NAMEPLATES SHALL BE ENGRAVED THREE-LAYER LAMINATED PLASTIC, WHITE LETTERS ON BLACK BACKGROUND. USE 1/8 INCH LETTERS FOR IDENTIFYING INDIVIDUAL EQUIPMENT AND LOADS AND 1/4 INCH LETTERS FOR GROUPED EQUIPMENT AND LOADS. NAMEPLATES FOR PANELBOARDS SHALL INDICATE THE SOURCE OF POWER PER NEC 408.4(B). PROVIDE ARC FLASH AND SHOCK HAZARD WARNING LABELS FOR ELECTRICAL EQUIPMENT PER NEC 110.16 PRIOR TO INSTALLING OR WORKING ON EQUIPMENT. ALSO, PROVIDE LABEL WITH AVAILABLE FAULT CURRENT AND DATE FOR SERVICE EQUIPMENT AND PANELBOARD. 8. USE ONLY COPPER BUILDING WIRE WITH TYPE THWN/THHN (DUAL RATED) OR XHHW INSULATION (GROUND WIRES MAY BE TYPE TW FOR CIRCUITS RATED 100A OR LESS OR TYPE THW FOR CIRCUITS OVER 100A). WIRE SHALL BE SIZED AND COLOR CODED PER THE NEC. CONDUCTORS FOR POWER AND LIGHTING CIRCUITS SMALLER THAN #12 AWG ARE NOT PERMITTED. 9. ALL CIRCUITS SHALL BE RUN IN CONDUIT AND SHALL CONTAIN SEPARATE GROUNDING CONDUCTOR SIZED PER NEC TABLE 250.122. WITH THE EXCEPTION OF CONDUIT IN AIR PLENUMS, FINAL CONNECTIONS (LESS THAN 6 FEET) TO ALL MOTORS AND OTHER VIBRATING EQUIPMENT SHALL BE MADE WITH LIQUID-TIGHT FLEXIBLE METAL CONDUIT (WITH GROUNDING CONDUCTOR). FLEXIBLE METAL CONDUIT, NONMETALLIC FLEX CONDUIT AND TUBING, MC CABLE OR NONMETALLIC-SHEATHED CABLE (ROMEX) SHALL NOT BE USED. MINIMUM SIZE FOR CONDUIT SHALL BE 1/2". UNLESS NOTED OTHERWISE, ALL CONDUIT SHALL BE CONCEALED. INSTALL ABOVEGROUND CONDUIT PARALLEL OR PERPENDICULAR TO BUILDING LINES. PROVIDE PULLWIRE FOR ALL EMPTY CONDUITS. 10. EMT CONDUIT SHALL NOT BE USED BELOW GRADE, OUTSIDE, IN CONCRETE, WHERE EXPOSED TO DAMAGE, OR FOR EXPOSED WORK IN AREAS WITHIN 8 FEET OF FLOOR. PROVIDE STEEL COMPRESSION TYPE FITTINGS.
AutoCAD SHX Text
11. PVC CONDUIT SHALL ONLY BE USED IN THE GROUND OR CONCRETE SLAB AND SHALL BE SCHEDULE 40. ALL ELLS TURNING UP OUT OF THE EARTH OR CONCRETE SLAB SHALL BE ASPHALTUM (TWO COATS) OR PVC COATED RIGID GALVANIZED STEEL CONDUIT. 12. SEE POWER RISER DIAGRAM ON SHEET E4.1 FOR SIZE OF ALL CONDUCTORS AND CONDUIT. 13. NO MORE THAN 3 PHASE CONDUCTORS (ON ALTERNATING HOT LEGS) SHALL BE COMBINED IN ONE HOMERUN CONDUIT. PROVIDE A DEDICATED FULLSIZE NEUTRAL FOR CIRCUITS REQUIRING A NEUTRAL. 14. EXCEPT AS NOTED OTHERWISE, ALL ELECTRICAL DEVICE AND JUNCTION BOXES SHALL BE MADE OF GALVANIZED STEEL. BOXES FOR WEATHERPROOF AND WATERTIGHT APPLICATIONS OR IN CONCRETE SHALL BE MADE OF CAST METAL. PROVIDE PULLBOXES AND HANDHOLES AS NECESSARY FOR THE CIRCUITS SHOWN. 15. PENETRATE ANY FIRE RATED WALLS, CEILINGS, AND FLOORS WITH FIRE STOPPING MATERIALS IN ACCORDANCE WITH FLORIDA BUILDING CODE REQUIREMENTS. PENETRATIONS OF ALL FIRE RATED ASSEMBLIES SHALL BE MADE IN ACCORDANCE WITH THE FIRE RATED ASSEMBLY'S UL LISTING, AS APPROVED BY THE AUTHORITY HAVING JURISDICTION. SEE EXISTING AND ANY NEW ARCHITECTURAL DRAWINGS FOR LOCATIONS OF ANY FIRE WALLS, CEILINGS, AND FLOORS. 16. UNLESS NOTED OTHERWISE, ALL MOTORS, INTEGRAL STARTERS, CONTROL AND MONITORING DEVICES (INCLUDING WIRE AND CONDUIT FOR CONTROL CIRCUITS), TIMERS, RELAYS, PILOT DEVICES AND OTHER REQUIRED CONTROL COMPONENTS FOR MECHANICAL SYSTEMS WILL BE FURNISHED AND INSTALLED UNDER DIVISIONS 22 AND 23. 17. DRAWINGS ARE INTENDED TO BE DIAGRAMMATIC ONLY. REVIEW ARCHITECTURAL, CIVIL, MECHANICAL, AND PLUMBING DRAWINGS AND COORDINATE WITH OTHER CONTRACTORS TO CONFIRM EXACT LOCATION FOR LIGHTING FIXTURES, ELECTRICAL DEVICES, WIRING AND EQUIPMENT AND AVOID INTERFERENCES BETWEEN RACEWAYS, DUCTS, PIPING, AND STRUCTURAL MEMBERS. RELOCATE EQUIPMENT AS NECESSARY TO MAINTAIN NEC WORKING AND DEDICATED EQUIPMENT SPACE REQUIREMENTS. 18. VISIT THE SITE AND EXAMINE THOSE PORTIONS OF THE BUILDING AFFECTED BY THIS PROJECT BEFORE SUBMITTING BID, SO AS TO BECOME FAMILIAR WITH EXISTING SITE CONDITIONS. SUBMISSION OF A BID WILL BE CONSTRUED AS EVIDENCE THAT SUCH EXAMINATION HAS BEEN MADE AND LATER CLAIMS FOR LABOR, MATERIALS, OR EQUIPMENT REQUIRED FOR DIFFICULTIES ENCOUNTERED WILL NOT BE ACCEPTED. FIELD VERIFY CONFIGURATION OF EXISTING ELECTRICAL DISTRIBUTION SYSTEM, INCLUDING MANUFACTURER AND CATALOG NUMBER OF EXISTING EQUIPMENT AND SIZE AND RATING OF EXISTING CIRCUITS AND PROTECTIVE DEVICES BEFORE STARTING WORK OR PURCHASING MATERIALS. 19. IMPORTANT: CONTRACTOR SHALL CONFORM WITH ALL OSHA IMPORTANT: CONTRACTOR SHALL CONFORM WITH ALL OSHA CONTRACTOR SHALL CONFORM WITH ALL OSHA STANDARDS AND NFPA 70E, STANDARD FOR ELECTRICAL SAFETY IN THE WORKPLACE, REQUIREMENTS FOR ELECTRICAL SAFETY, INCLUDING PROPER LOCK-OUT / TAG-OUT PROCEDURES AND WEARING APPROPRIATE PERSONAL PROTECTIVE EQUIPMENT (PPE). CONTRACTOR'S EMPLOYEES SHALL HAVE RECEIVED NFPA 70E ARC FLASH TRAINING. 20. IMPORTANT: CONFIRM WITH GENERAL CONTRACTOR AND OWNER IMPORTANT: CONFIRM WITH GENERAL CONTRACTOR AND OWNER CONFIRM WITH GENERAL CONTRACTOR AND OWNER THAT NO ASBESTOS, LEAD PAINT, MOLD OR OTHER HAZARDOUS MATERIALS EXIST BEFORE STARTING WORK. IF ANY SUSPICIOUS MATERIALS ARE FOUND DURING DEMOLITION OR CONSTRUCTION, STOP WORK IMMEDIATELY AND CONTACT GENERAL CONTRACTOR. 21. THE ABOVE NOTES APPLY TO ALL ELECTRICAL DRAWINGS.
AutoCAD SHX Text
XX
AutoCAD SHX Text
ELECTRICAL PANEL
AutoCAD SHX Text WIRE ARC. ARROWS REPRESENT HOMERUNS. HASHMARKS REPRESENT CONDUCTORS (LONG HASHMARK IS NEUTRAL). GROUND CONDUCTOR NOT SHOWN.
AutoCAD SHX Text
SPECIFIC NOTE
AutoCAD SHX Text
ABOVE FINISHED FLOOR
AutoCAD SHX Text
AFF
AutoCAD SHX Text
AUTHORITY HAVING JURISDICTION
AutoCAD SHX Text
AHJ
AutoCAD SHX Text
NOT IN CONTRACT
AutoCAD SHX Text
NIC
AutoCAD SHX Text
GALVANIZED RIGID STEEL
AutoCAD SHX Text
GRS
AutoCAD SHX Text
US
AutoCAD SHX Text
UNDERGROUND SECONDARY
AutoCAD SHX Text
GENERAL CONTRACTOR
AutoCAD SHX Text
GC
Sheet Number
Project Number
24-0121
No.
REVISIONS
Drawn By:
Check By:
Approved By:
Date:
G A
D S
D E
N C
O U
N T
Y R
E T
R O
F
IT
S H
E L
T E
R D
E S
IG
N
BL
U E
ST
A
R H
IG
H
W A
Y Q
U
IN
CY
, F
L G
A D
SD
EN
C O
U N
TY
BO
A
RD
O F
CO
U
N
TY
C O
M M
IS
SI
O N
ER
S
D E
S
IG
N E
R E
X P
R E
S S
LY
R
E S
E R
V E
S T
H E
C O
P Y
R
IG
H T
A N
D O
TH
E
R P
R O
P E
R
TY
R
IG
H
TS
W
IT
H
IN
T H
E S
E D
R A
W
IN
G S
TH
E S
E P
LA
N
S , D
E S
IG
N
S A
N D
D R
A W
IN
G
S A
R E
N O
T
TO
B E
R E
P R
O D
U C
E D
, C O
P
IE
D O
R U
S E
D
IN
A N
Y M
A N
N E
R W
IT
H
O U
T E
X P
R E
S S
E D
W R
IT
TE
N C
O N
S E
N T
O F
B A
K E
R D
E S
IG
N
B U
IL
D
, L
LC
TH
E S
E P
LA
N
S S
H A
LL
N
O T
B E
D
IS
TR
IB
U
TE
D T
O A
N Y
P A
R
TY
W
IT
H O
U T
S A
ID
W
R
IT
TE
N
C O
N S
E N
T.
N . N ew na n St re et
, 2 nd
F lo or , J ac ks on vi lle F
L p f er de si gn .b ui ld
C .A
. N o
. 3
1 5.31.24 60% SUBMITTAL
E n g in e e r in g
Si m es
R os ch , L
L C
C O
N
SU
LT
IN
G E
N G
IN
E
E R
S
F ul le rt on
S tr ee t, Su ite
Ja ck so nv ill e, F L
Ph
4)
-3
F ax
4)
-9
FL
. C er t.
of A ut h.
7R S
2 6.11.24 PERMIT ISSUE
F L O R I D A
PROFES ENGIN
EE
512 49N o.
LICE ENS
R
SIONAL
STAT E O F
DAVI IMESD W.S
DWS
DWS
05.31.24
ELECTRICAL SITE
PLAN
E2.1
US
U S
U S
U S
U S
U S
US US US US US US US US
U S
GENERAL NOTES: SPECIFIC NOTES:
N
SCALE: 1" = 30'-0"
ELECTRICAL SITE PLAN
SCALE: 1" = 30'
0 30' 60'
AutoCAD SHX Text 06/11/24
AutoCAD SHX Text
DAVID W. SIMES
AutoCAD SHX Text
FL PE #51249
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
1. ALL WORK ASSOCIATED WITH ELECTRIC SERVICE SHALL BE DONE IN ACCORDANCE WITH THE UTILITY RULES AND REGULATIONS FOR ELECTRIC SERVICE, LATEST EDITION. LOCATION AND CONFIGURATION OF ELECTRICAL SERVICE ARE TENTATIVE. THE CONTRACTOR SHALL PAY ALL FEES NECESSARY TO ESTABLISH ELECTRICAL SERVICE. CONTRACTOR SHALL CONTACT UTILITY COMPANY ENGINEER FOR SERVICE REQUIREMENTS PRIOR TO BID. IF REQUIREMENTS ARE DIFFERENT THAN WHAT IS SHOWN ON DRAWINGS, CONTRACTOR SHALL INCLUDE ALL COST FOR MODIFICATIONS AS PART OF BASE BID. CONTACT CITY OF QUINCY UTILITIES, MIKE PENNINGTON, PH (850)618-0040 BEFORE PURCHASING ANY MATERIALS AND TO COORDINATE ALL WORK. 2. ELECTRICAL SITE PLAN IS FOR ORIENTATION PURPOSES ONLY. SEE EXISTING CIVIL SITE PLAN FOR LOCATION OF STRUCTURES, CURBING, PAVED AREA, EXISTING UTILITIES, ETC. LOCATIONS SHOWN FOR EXTERIOR ELECTRICAL EQUIPMENT IS ONLY APPROXIMATE. CONFIRM EXACT LOCATION. 3. ROUTING OF UNDERGROUND CONDUITS SHOWN IS INTENDED TO BE ROUTING OF UNDERGROUND CONDUITS SHOWN IS INTENDED TO BE DIAGRAMMATIC. HAND DIG AND ROUTE CONDUIT AS NECESSARY TO AVOID STRUCTURES, TREES, UNDERGROUND UTILITIES, ETC. CONTACT UTILITY LOCATE SERVICE BEFORE DIGGING. PROVIDE PULLBOXES AS NECESSARY AND/OR REQUIRED TO AID IN PULLING CONDUCTORS. 4. AFTER CONSTRUCTION, RETURN SURROUNDING AREA, INCLUDING GRASS, CURBS, AFTER CONSTRUCTION, RETURN SURROUNDING AREA, INCLUDING GRASS, CURBS, AND PAVEMENT TO ORIGINAL CONDITIONS.
AutoCAD SHX Text EXISTING 480Y/277V, THREE PHASE, FOUR WIRE PAD-MOUNTED UTILITY TRANSFORMER TO REMAIN. CONFIRM EXACT LOCATION. PROVIDE UNDERGROUND SECONDARY TO SERVICE EQUIPMENT PER POWER RISER DIAGRAM ON SHEET E4.1. AVOID EXISTING UTILITIES. PROVIDE WARNING TAPE AT LEAST 12" ABOVE CONDUIT, PER NEC. PROVIDE 90 DEGREE LONG RADIUS SWEEPS AT BOTH ENDS. STUB UP CONDUIT INTO TRANSFORMER AS DIRECTED BY UTILITY. UTILITY WILL MAKE FINAL CONNECTIONS AT THE TRANSFORMER. REPAIR PAVEMENT PER DETAILS 3 AND 4, SHEET E5.1. PROVIDE SERVICE EQUIPMENT. SEE POWER RISER DIAGRAM ON SHEET E4.1 FOR MORE INFORMATION.
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text E5.1
AutoCAD SHX Text
AutoCAD SHX Text E5.1
Sheet Number
Project Number
24-0121
No.
REVISIONS
Drawn By:
Check By:
Approved By:
Date:
G A
D S
D E
N C
O U
N T
Y R
E T
R O
F
IT
S H
E L
T E
R D
E S
IG
N
BL
U E
ST
A
R H
IG
H
W A
Y Q
U
IN
CY
, F
L G
A D
SD
EN
C O
U N
TY
BO
A
RD
O F
CO
U
N
TY
C O
M M
IS
SI
O N
ER
S
D E
S
IG
N E
R E
X P
R E
S S
LY
R
E S
E R
V E
S T
H E
C O
P Y
R
IG
H T
A N
D O
TH
E
R P
R O
P E
R
TY
R
IG
H
TS
W
IT
H
IN
T H
E S
E D
R A
W
IN
G S
TH
E S
E P
LA
N
S , D
E S
IG
N
S A
N D
D R
A W
IN
G
S A
R E
N O
T
TO
B E
R E
P R
O D
U C
E D
, C O
P
IE
D O
R U
S E
D
IN
A N
Y M
A N
N E
R W
IT
H
O U
T E
X P
R E
S S
E D
W R
IT
TE
N C
O N
S E
N T
O F
B A
K E
R D
E S
IG
N
B U
IL
D
, L
LC
TH
E S
E P
LA
N
S S
H A
LL
N
O T
B E
D
IS
TR
IB
U
TE
D T
O A
N Y
P A
R
TY
W
IT
H O
U T
S A
ID
W
R
IT
TE
N
C O
N S
E N
T.
N . N ew na n St re et
, 2 nd
F lo or , J ac ks on vi lle F
L p f er de si gn .b ui ld
C .A
. N o
. 3
1 5.31.24 60% SUBMITTAL
Si m es
R os ch , L
L C
C O
N
SU
LT
IN
G E
N G
IN
E
E R
S
F ul le rt on
S tr ee t, Su ite
Ja ck so nv ill e, F L
Ph
4)
-3
F ax
4)
-9
FL
. C er t.
of A ut h.
7R S
2 6.11.24 PERMIT ISSUE
F L O R I D A
PROFES ENGIN
EE
512 49N o.
LICE ENS
R
SIONAL
STAT E O F
DAVI IMESD W.S
3/32" = 1'
POWER PLAN
N
SPECIFIC NOTES:
SCALE: 3/32" = 1'-0"
0 10' 20'
DWS
DWS
05.31.24
POWER PLAN
E3.1
3 11.14.25 REVISION 1
GENERAL NOTES:
AutoCAD SHX Text 06/11/24
AutoCAD SHX Text
DAVID W. SIMES
AutoCAD SHX Text
FL PE #51249
AutoCAD SHX Text
LIMITS OF SPECIAL NEEDS SHELTER
AutoCAD SHX Text
WING 1
AutoCAD SHX Text
WING 2
AutoCAD SHX Text
WING 3
AutoCAD SHX Text
CORE
AutoCAD SHX Text PROVIDE SERVICE EQUIPMENT INCLUDING CT METER SOCKET AND ENCLOSURE AND 600A, 480V, 3 POLE ENCLOSED CIRCUIT BREAKER IN NEMA 3R ENCLOSURE. CONFIRM LOCATION. SEE POWER RISER DIAGRAM, SHEET E4.1 FOR MORE INFORMATION. COORDINATE WITH GENERAL CONTRACTOR TO PROVIDE A HARDENED ENCLOSURE FOR SERVICE EQUIPMENT PER STRUCTURAL DRAWINGS. SIZE SHOWN IS PRELIMINARY. SIZE AS NECESSARY FOR SUBMITTED ELECTRICAL GEAR AND FOR NEC WORKING CLEARANCES (4' MINIMUM). PROVIDE 600A, 480V, 4 POLE, U.L. 1008 COMPLIANT AUTOMATIC TRANSFER SWITCH (ATS) WITH BYPASS, WITH A 65K SYMMETRICAL AMPS SHORT CIRCUIT RATING. CONFIRM LOCATION. BASIS OF DESIGN FOR THE TRANSFER SWITCH IS ASCO 4000 AUTOMATIC TRANSFER SWITCH. IMPORTANT: MAINTAIN ALL REQUIRED WORKING CLEARANCES FOR SWITCH. PROVIDE SEPARATE MAINTAIN ALL REQUIRED WORKING CLEARANCES FOR SWITCH. PROVIDE SEPARATE CONDUITS AND CABLING FOR CONTROL CIRCUITS AND REMOTE ANNUNCIATOR (NOT SHOWN). PROVIDE 600A, 480V, PANELBOARD 'MDP' PER PANEL SCHEDULE AND POWER RISER DIAGRAM, SHEET E4.1. FUTURE 480Y/277 VOLT PORTABLE DIESEL GENERATOR (PRELIMINARILY SIZED AT 300KW) WITH 150 MPH RATED ALUMINUM ENCLOSURE (MISSILE IMPACT RATED) AND 72 HOUR SUB-BASE TANK (NOT IN CONTRACT). LOCATION IS TENTATIVE. IMPORTANT: MAINTAIN ALL APPLICABLE IMPORTANT: MAINTAIN ALL APPLICABLE MAINTAIN ALL APPLICABLE AND NECESSARY SAFETY CLEARANCES FOR HELIPAD. PRELIMINARY LOCATION FOR FUTURE PERMANENT 480Y/277 VOLT DIESEL GENERATOR AND SUBBASE TANK (PRELIMINARILY SIZED AT 300KW) (NOT IN CONTRACT) WITH 150 MPH RATED WALK-IN ALUMINUM ENCLOSURE (MISSILE IMPACT RATED) AND 72 HOUR SUB-BASE TANK (NOT IN CONTRACT). LOCATION IS TENTATIVE.
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
MDP
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
ELEC RM
AutoCAD SHX Text
AutoCAD SHX Text
ECB
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
CT
AutoCAD SHX Text
QCB
AutoCAD SHX Text
DPDT
AutoCAD SHX Text M
1. GIVEN THAT THIS FACILITY WILL BE USED AS A SPECIAL / MEDICAL NEEDS SHELTER GIVEN THAT THIS FACILITY WILL BE USED AS A SPECIAL / MEDICAL NEEDS SHELTER (SpNS), THE ENGINEER RECOMMENDS THAT THE ELECTRICAL DISTRIBUTION SYSTEM BE UPGRADED TO A PERMANENT EMERGENCY GENERATOR WITH A SEPARATE BRANCH AND RELATED TRANSFER SWITCH FOR THE ESSENTIAL POWER SYSTEM MEETING THE REQUIREMENTS OF ICC 500 AND NEC ARTICLE 700 AS SOON AS POSSIBLE (NOT IN CONTRACT). SEE REVISION 1 OF THE ENGINEERING STUDY FOR GADSDEN COUNTY EMERGENCY SHELTER, DATED 11/14/25, FOR MORE INFORMATION.
Sheet Number
Project Number
24-0121
No.
REVISIONS
Drawn By:
Check By:
Approved By:
Date:
G A
D S
D E
N C
O U
N T
Y R
E T
R O
F
IT
S H
E L
T E
R D
E S
IG
N
BL
U E
ST
A
R H
IG
H
W A
Y
Q U
IN
CY
, F L
G A
D
SD
EN
C
O U
N
TY
BO
A
RD
O
F
CO
U N
TY
C
O M
M
IS
SI
O
N
ER
S
D E
S
IG
N E
R E
X P
R E
S S
LY
R
E S
E R
V E
S T
H E
C O
P Y
R
IG
H T
A N
D O
TH
E
R P
R O
P E
R
TY
R
IG
H
TS
W
IT
H
IN
T H
E S
E D
R A
W
IN
G S
TH
E S
E P
LA
N
S , D
E S
IG
N
S A
N D
D R
A W
IN
G
S A
R E
N O
T
TO
B E
R E
P R
O D
U C
E D
, C O
P
IE
D O
R U
S E
D
IN
A N
Y M
A N
N E
R W
IT
H
O U
T E
X P
R E
S S
E D
W R
IT
TE
N C
O N
S E
N T
O F
B A
K E
R D
E S
IG
N
B U
IL
D
, L
LC
TH
E S
E P
LA
N
S S
H A
LL
N
O T
B E
D
IS
TR
IB
U
TE
D T
O A
N Y
P A
R
TY
W
IT
H O
U T
S A
ID
W
R
IT
TE
N
C O
N S
E N
T.
N . N ew na n St re et
, 2 nd
F lo or , J ac ks on vi lle F
L p f er de si gn .b ui ld
C .A
. N o
. 3
1 5.31.24 60% SUBMITTAL
E n g in e e r in g
Si m es
R os ch , L
L C
C O
N
SU
LT
IN
G E
N G
IN
E
E R
S
F ul le rt on
S tr ee t, Su ite
Ja ck so nv ill e, F L
Ph
4)
-3
F ax
4)
-9
FL
. C er t.
of A ut h.
7R S
2 6.11.24 PERMIT ISSUE
F L O R I D A
PROFES ENGIN
EE
512 49N o.
LICE ENS
R
SIONAL
STAT E O F
DAVI IMESD W.S
DWS
DWS
05.31.24
POWER RISER
DIAGRAM &
SCHEDULES
E4.1
SPECIFIC NOTES: GENERAL NOTES:
CPENTID
PANEL - MDP
SCALE: NTS
POWER RISER DIAGRAM
3 11.14.25 REVISION 1
AutoCAD SHX Text 06/11/24
AutoCAD SHX Text
DAVID W. SIMES
AutoCAD SHX Text
FL PE #51249
AutoCAD SHX Text
AutoCAD SHX Text
PANEL 'MDP' 600A 480Y/277V
AutoCAD SHX Text
SPD
AutoCAD SHX Text
AutoCAD SHX Text
NEW HARDENED ENCLOSURE
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text EXISTING PRIMARY SERVICE LATERAL TO REMAIN. CONFIRM LOCATION. EXISTING 480Y/277V, PAD-MOUNTED UTILITY TRANSFORMER AND CONCRETE PAD TO REMAIN. TRANSFORMER FEEDS EXISTING EMERGENCY FACILITY. SEE ELECTRICAL SITE PLAN ON SHEET E2.1 FOR MORE INFORMATION. PROVIDE NEW UNDERGROUND SECONDARY (US) FROM TRANSFORMER TO SERVICE EQUIPMENT. PROVIDE 2 SETS OF 4-350 KCMIL CONDUCTORS, EACH IN 3" CONDUIT. ALSO PROVIDE A SPARE 3" CONDUIT WITH PULLWIRE. PROVIDE WARNING TAPE A MINIMUM OF 12" ABOVE CONDUIT, PER NEC. PROVIDE C.T. METER ENCLOSURE PER UTILITY STANDARDS FOR ELECTRIC SERVICE. ENCLOSURE SHALL BE APPROVED BY UTILITY. PROPERLY GROUND ENCLOSURE PER NEC SECTION 250 AND LOCAL STANDARDS. PROVIDE 1 1/2" CONDUIT WITH PULLWIRE FOR UTILITY PROVIDED CT CONDUCTORS. PROVIDE UTILITY APPROVED CT METER SOCKET IN NEMA 3R ENCLOSURE. PROPERLY GROUND METER SOCKET PER NEC SECTION 250 AND LOCAL STANDARDS. PROVIDE 2 SETS OF 4-350 AWG CONDUCTORS, EACH IN A 3" GRS NIPPLE TO ENCLOSED CIRCUIT BREAKER DESCRIBED BELOW. PROVIDE 600A, 3 POLE ENCLOSED CIRCUIT BREAKER, RATED 35KAIC IN NEMA 3R ENCLOSURE. ENCLOSED CIRCUIT BREAKER SHALL BE SUITABLE FOR USE AS SERVICE EQUIPMENT. BOND NEUTRAL AND EQUIPMENT GROUNDING BUSSES. PROVIDE A 600A, 3 POLE, 480V DOUBLE THROW SWITCH IN NEMA 3R ENCLOSURE FOR FUTURE TEMPORARY GENERATOR CONNECTION. PROVIDE NEMA 3R PORTABLE GENERATOR QUICK CONNECT BOX CONTAINING MECH LUGS. PROVIDE RED PLACARD PER PROJECT GENERAL NOTE 7, SHEET E1.1, STATING: WARNING: "PER NEC 702.5, ONLY QUALIFIED PERSONS, SHALL CONNECT TEMPORARY GENERATOR TO SYSTEM. DO NOT SWITCH UNDER LOAD. CONFIRM PHASE ROTATION BEFORE CONNECTION."
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 8A
AutoCAD SHX Text
ENCLOSED CIRCUIT BREAKER 480Y/277V 600A, 3 , 4W
AutoCAD SHX Text M
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text E5.1
AutoCAD SHX Text
AutoCAD SHX Text
TO PRIMARY RISER POLE
AutoCAD SHX Text
AutoCAD SHX Text PROVIDE #3/0 AWG COPPER GROUNDING ELECTRODE CONDUCTOR. GROUND AND BOND PER DETAIL 1 ON SHEET E5.1. PROVIDE 2 SETS OF 4-350 KCMIL CONDUCTORS AND #1 AWG GROUND, EACH IN A 3" CONDUIT. PROVIDE 600A, 480V, THREE PHASE, 4 POLE, SURFACE MOUNTED, AUTOMATIC TRANSFER SWITCH (ATS) WITH BYPASS, SURGE PROTECTION AND A SHORT CIRCUIT WITHSTAND RATING OF 35K SYMMETRICAL AMPS IN NEMA 1 ENCLOSURE FOR FUTURE PERMANENT GENERATOR. ATS SHALL HAVE SWITCHED NEUTRAL. IMPORTANT: MAINTAIN ALL REQUIRED WORKING IMPORTANT: MAINTAIN ALL REQUIRED WORKING MAINTAIN ALL REQUIRED WORKING CLEARANCES FOR SWITCH. PROVIDE 2-3" CONDUITS FOR FUTURE GENERATOR FEEDER. ALSO PROVIDE A 1" CONDUIT FOR STARTING CIRCUIT AND 1 1/2" CONDUIT FOR SIGNAL WIRE (FOR FUTURE ANNUNCIATOR). ROUTE ALL CONDUITS 5' OUTSIDE THE BUILDING, CAP, AND PROVIDE PULLWIRE. PROVIDE MARKER. PROVIDE MARKER. PROVIDE 1 1/2" CONDUIT WITH PULLWIRE TO 5' OUTSIDE THE BUILDING FROM THE NEW ELECTRICAL ROOM FOR FUTURE GENERATOR ACCESSORY POWER CIRCUITS. CAP AND PROVIDE MARKER. PROVIDE 600A, 480Y/277V PANEL 'MDP' PER PANEL SCHEDULE, THIS SHEET. PROVIDE A SURGE SUPPRESSION DEVICE (SPD). THE SPD SHALL BE RATED FOR AT LEAST 200KA, PER PHASE, SURGE CURRENT (SINGLE PULSE SURGE CURRENT FOR AN 8X20 MS WAVEFORM) AND SHALL BE SERVICE RATED. THE VOLTAGE PROTECTION RATING SHALL BE NO MORE THAN 1,200 VOLTS L-N AND 1,800 VOLTS L-L. THE SPD SHALL HAVE VISUAL FAULT INDICATION AND SHALL MEET UL 1449, CURRENT EDITION. THE SPD AND THE MAIN CIRCUIT BREAKER FOR THE SERVICE EQUIPMENT SHALL ALSO MEET UL 96A PARAGRAPH 13.1 REQUIREMENTS FOR LIGHTNING PROTECTION. COORDINATE WITH GENERAL CONTRACTOR TO PROVIDE BARRIER WALL FOR SERVICE EQUIPMENT PER STRUCTURAL DRAWINGS AND TO DETERMINE HOW TO SAFELY ROUTE PORTABLE GENERATOR CABLES INTO ENCLOSURE.
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
1. UNDERGROUND CONDUIT MAY BE SCHEDULE 40 PVC (VERSUS GRS). ANY TRANSITIONS TO ABOVEGROUND SHALL BE MADE WITH PVC COATED RIGID STEEL OR WITH RIGID STEEL CONDUIT COATED WITH 2 COATS OF ASPHALTIC MASTIC. THIS NOTE APPLIES TO ALL CONDUITS SHOWN ON THIS RISER DIAGRAM. 2. PROPERLY SEAL WALL PENETRATIONS AND PAINT CONDUIT TO MATCH WALL.
AutoCAD SHX Text
NEW ELECTRICAL ROOM
AutoCAD SHX Text
C.T. CABINET
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 8A
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text
'ATS-MAIN' 600A, 480V, 4 POLE
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
LOCATION: NEW ELEC RM
AutoCAD SHX Text
FED BY: ATS-MAIN
AutoCAD SHX Text
TYPE:
AutoCAD SHX Text
SURFACE MT, NEMA 1
AutoCAD SHX Text
MAIN BUS RATING:
AutoCAD SHX Text 600A
AutoCAD SHX Text
MAIN CB:
AutoCAD SHX Text
MLO
AutoCAD SHX Text
FRAME:
AutoCAD SHX Text
TYPE:
AutoCAD SHX Text
BOLT-ON
AutoCAD SHX Text
VOLTAGE:
AutoCAD SHX Text
AutoCAD SHX Text
/277V, 3PH, 4 WIRE
AutoCAD SHX Text
MINIMUM AIC:
AutoCAD SHX Text 35K
AutoCAD SHX Text
DEVICE
AutoCAD SHX Text
BRANCH CIRCUIT
AutoCAD SHX Text
PHASE LOAD
AutoCAD SHX Text
(KVA)
AutoCAD SHX Text
BRANCH CIRCUIT
AutoCAD SHX Text
DEVICE
AutoCAD SHX Text
NO.
AutoCAD SHX Text
AMPS
AutoCAD SHX Text
TRIP
AutoCAD SHX Text
POLES
AutoCAD SHX Text
WIRE
AutoCAD SHX Text
GRND
AutoCAD SHX Text
COND.
AutoCAD SHX Text
(IN)
AutoCAD SHX Text
NOTES
AutoCAD SHX Text
SERVING
AutoCAD SHX Text
SERVING
AutoCAD SHX Text
NOTES
AutoCAD SHX Text
COND.
AutoCAD SHX Text
(IN)
AutoCAD SHX Text
GRND
AutoCAD SHX Text
WIRE
AutoCAD SHX Text
POLES
AutoCAD SHX Text
AMPS
AutoCAD SHX Text
TRIP
AutoCAD SHX Text
NO.
AutoCAD SHX Text A
AutoCAD SHX Text B
AutoCAD SHX Text C
AutoCAD SHX Text A
AutoCAD SHX Text B
AutoCAD SHX Text C
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
LTS, FUTURE
AutoCAD SHX Text 2.8
AutoCAD SHX Text 3.9
AutoCAD SHX Text
CU-1 (FUTURE)
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
LTS, FUTURE
AutoCAD SHX Text 2.8
AutoCAD SHX Text 3.9
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
LTS, FUTURE
AutoCAD SHX Text 2.8
AutoCAD SHX Text 3.9
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
LTS, FUTURE
AutoCAD SHX Text 2.8
AutoCAD SHX Text 2.2
AutoCAD SHX Text
DOAS-1 (FUTURE)
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
SPARE
AutoCAD SHX Text 2.2
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
SPARE
AutoCAD SHX Text 2.2
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
LTS, PERIMETER (FUTURE)
AutoCAD SHX Text 0.4
AutoCAD SHX Text 4.7
AutoCAD SHX Text
HP-1 (FUTURE)
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
SPARE
AutoCAD SHX Text 4.7
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
SPARE
AutoCAD SHX Text 4.7
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
SPARE
AutoCAD SHX Text 2.3
AutoCAD SHX Text
AHU-1 (FUTURE)
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
SPARE
AutoCAD SHX Text 2.3
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
SPARE
AutoCAD SHX Text 2.3
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
SPACE
AutoCAD SHX Text 6.7
AutoCAD SHX Text
DUCT HEATER (FUTURE)
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
SPACE
AutoCAD SHX Text 6.7
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
SPACE
AutoCAD SHX Text 6.7
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
MISC LOADS (FUTURE)
AutoCAD SHX Text 17.0
AutoCAD SHX Text
PANEL 'EMLDP' (FUTURE)
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 17.0
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 17.0
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
PANEL 'SLDP' (FUTURE)
AutoCAD SHX Text 42.5
AutoCAD SHX Text
SPD
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 38.1
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 38.8
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
* NOTE: PROVIDE CIRCUIT BREAKERS FOR ALL FUTURE LOADS.
AutoCAD SHX Text 65.5
AutoCAD SHX Text 57.9
AutoCAD SHX Text 58.6
AutoCAD SHX Text 19.8
AutoCAD SHX Text 19.8
AutoCAD SHX Text 19.8
AutoCAD SHX Text
TOTAL CONNECTED LOAD:
AutoCAD SHX Text 241.5
AutoCAD SHX Text
KVA
AutoCAD SHX Text
TOTAL DEMAND LOAD:
AutoCAD SHX Text 244.4
AutoCAD SHX Text
KVA
AutoCAD SHX Text
DPDT SWITCH 480Y/277V 600A, 3 , 4W
AutoCAD SHX Text N
AutoCAD SHX Text E
AutoCAD SHX Text 8C
AutoCAD SHX Text 8B
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 8B
AutoCAD SHX Text 8C
AutoCAD SHX Text
OUTSIDE BUILDING
AutoCAD SHX Text
Sheet Number
Project Number
24-0121
No.
REVISIONS
Drawn By:
Check By:
Approved By:
Date:
G A
D S
D E
N C
O U
N T
Y R
E T
R O
F
IT
S H
E L
T E
R D
E S
IG
N
BL
U E
ST
A
R H
IG
H
W A
Y
Q U
IN
CY
, F L
G A
D
SD
EN
C
O U
N
TY
BO
A
RD
O
F
CO
U N
TY
C
O M
M
IS
SI
O
N
ER
S
D E
S
IG
N E
R E
X P
R E
S S
LY
R
E S
E R
V E
S T
H E
C O
P Y
R
IG
H T
A N
D O
TH
E
R P
R O
P E
R
TY
R
IG
H
TS
W
IT
H
IN
T H
E S
E D
R A
W
IN
G S
TH
E S
E P
LA
N
S , D
E S
IG
N
S A
N D
D R
A W
IN
G
S A
R E
N O
T
TO
B E
R E
P R
O D
U C
E D
, C O
P
IE
D O
R U
S E
D
IN
A N
Y M
A N
N E
R W
IT
H
O U
T E
X P
R E
S S
E D
W R
IT
TE
N C
O N
S E
N T
O F
B A
K E
R D
E S
IG
N
B U
IL
D
, L
LC
TH
E S
E P
LA
N
S S
H A
LL
N
O T
B E
D
IS
TR
IB
U
TE
D T
O A
N Y
P A
R
TY
W
IT
H O
U T
S A
ID
W
R
IT
TE
N
C O
N S
E N
T.
N . N ew na n St re et
, 2 nd
F lo or , J ac ks on vi lle F
L p f er de si gn .b ui ld
C .A
. N o
. 3
1 5.31.24 60% SUBMITTAL
E n g in e e r in g
Si m es
R os ch , L
L C
C O
N
SU
LT
IN
G E
N G
IN
E
E R
S
F ul le rt on
S tr ee t, Su ite
Ja ck so nv ill e, F L
Ph
4)
-3
F ax
4)
-9
FL
. C er t.
of A ut h.
7R S
2 6.11.24 PERMIT ISSUE
F L O R I D A
PROFES ENGIN
EE
512 49N o.
LICE ENS
R
SIONAL
STAT E O F
DAVI IMESD W.S
DWS
DWS
05.31.24
ELECTRICAL
DETAILS
E5.1
E5.1
SCALE: NTS
GENERAL GROUNDING DETAIL E5,1
SCALE: NTS
GROUND BAR DETAIL
E5.1
SCALE: NTS
PAVEMENT PATCHING DETAIL
E5.1
SCALE: NTS
CONCRETE PAVEMENT PATCHING DETAIL
AutoCAD SHX Text 06/11/24
AutoCAD SHX Text
DAVID W. SIMES
AutoCAD SHX Text
FL PE #51249
AutoCAD SHX Text
CONCRETE-ENCASED ELECTRODE PER NEC 250.52(A)(3), IF AVAILABLE
AutoCAD SHX Text MAIN BONDING JUMPER. MAY BE COPPER CABLE OR EQUIVALENT BUS BAR WITH REMOVABLE LINK.
AutoCAD SHX Text
GROUND ROD(S) WITH EXOTHERMICALLY WELDED CONNECTION
AutoCAD SHX Text NOTES: 1. BOND & GROUND ELECTRICAL SYSTEM PER NEC SECTION BOND & GROUND ELECTRICAL SYSTEM PER NEC SECTION 250 AND ALL LOCAL CODES AND STATUTES. TEST GROUND AT LEAST 48 HOURS AFTER RAINFALL AND PER SPECIFICATIONS TO ENSURE A MAXIMUM RESISTANCE TO GROUND OF 10 OHMS. ADD ADDITIONAL GROUND RODS AS NECESSARY TO MEET THIS REQUIREMENT.
AutoCAD SHX Text
FLOOR
AutoCAD SHX Text
SERVICE DISCONNECT
AutoCAD SHX Text
METAL WATER PIPE, IF AVAILABLE
AutoCAD SHX Text
EFFECTIVELY GROUNDED EXPOSED BLDG. STEEL
AutoCAD SHX Text N
AutoCAD SHX Text G
AutoCAD SHX Text
GRADE
AutoCAD SHX Text
FULL-SIZED GEC
AutoCAD SHX Text
FULL-SIZED GEC (SEE POWER RISER FOR SIZE)
AutoCAD SHX Text
#6 AWG
AutoCAD SHX Text
SERVICE ENTRANCE EQUIPMENT COPPER GROUNDING BAR
AutoCAD SHX Text E5.1
AutoCAD SHX Text
AutoCAD SHX Text
2. WHEN CONDUCTORS ARE SUBJECT TO DAMAGE THEY SHALL BE PROTECTED PER NEC. 3. ALL GROUND ELECTRODE CONDUCTORS SHALL BE COPPER.
AutoCAD SHX Text
#4 AWG
AutoCAD SHX Text
FULL-SIZED GEC
AutoCAD SHX Text
FULL-SIZED GEC (SEE POWER RISER FOR SIZE)
AutoCAD SHX Text
TO SERVICE GROUND
AutoCAD SHX Text 12" x 4" x 1/4" COPPER INSULATED GROUND BAR
AutoCAD SHX Text
TO MAIN SVC DISCONNECT
AutoCAD SHX Text
TYPICAL GROUNDING ELECTRODE CONDUCTOR.
AutoCAD SHX Text
STEEL MOUNTING BRACKET WITH RUBBER INSULATOR
AutoCAD SHX Text NOTES: 1. IF SERVICE DISCONNECT IS LOCATED OUTSIDE, PLACE IF SERVICE DISCONNECT IS LOCATED OUTSIDE, PLACE GROUND BAR AT CLOSEST ACCESSIBLE LOCATION INSIDE THE BUILDING.
AutoCAD SHX Text
MASTIC SEALANT,
AutoCAD SHX Text
EXPANSION JOINT
AutoCAD SHX Text
REMOVE EXISTING
AutoCAD SHX Text
PER NEC
AutoCAD SHX Text
PER NEC
AutoCAD SHX Text
ABOVE CONDUIT
AutoCAD SHX Text
WARNING TAPE
AutoCAD SHX Text
AT LEAST 12"
AutoCAD SHX Text
AS REQUIRED.
AutoCAD SHX Text
MATERIAL AND
AutoCAD SHX Text
CONDUIT DEPTH
AutoCAD SHX Text
CONDUIT DEPTH
AutoCAD SHX Text
SAW CUT AND
AutoCAD SHX Text
CONCRETE
AutoCAD SHX Text
SAME AS EXISTING
AutoCAD SHX Text
BACKFILL
AutoCAD SHX Text
COMPACTED
AutoCAD SHX Text
BASE COURSE
AutoCAD SHX Text
6" MIN.
AutoCAD SHX Text
CONCRETE
AutoCAD SHX Text
EXISTING
AutoCAD SHX Text
NEW CONCRETE
AutoCAD SHX Text
CONCRETE
AutoCAD SHX Text
TO BE 3,000 PSI
AutoCAD SHX Text
SAW CUT
AutoCAD SHX Text
(IF BITUM)
AutoCAD SHX Text
SAME AS EXISTING
AutoCAD SHX Text
6" MIN.
AutoCAD SHX Text
BASE COURSE
AutoCAD SHX Text
COMPACTED
AutoCAD SHX Text
BACKFILL
AutoCAD SHX Text
AT LEAST 12"
AutoCAD SHX Text
WARNING TAPE
AutoCAD SHX Text
ABOVE CONDUIT
AutoCAD SHX Text
CONDUIT DEPTH
AutoCAD SHX Text
PAVEMENT EDGE
AutoCAD SHX Text
MIN
AutoCAD SHX Text 12"
AutoCAD SHX Text
TACK COAT
AutoCAD SHX Text
WIDTH
AutoCAD SHX Text
TRENCH
AutoCAD SHX Text
MIN
AutoCAD SHX Text 12"
AutoCAD SHX Text
2" MIN.
AutoCAD SHX Text
EXIST PAV'T
AutoCAD SHX Text
MATCH EXISTING
AutoCAD SHX Text
PAVEMENT SECTION
AutoCAD SHX Text
PRIME COAT
AutoCAD SHX Text
PER NEC
AutoCAD SHX Text
2" MIN
AutoCAD SHX Text
1' MIN
PER NEC
| 2325301 E1.1 Electrical Legend & General Notes-Model |
| 2325301 E2.1 Electrical Site Plan-Model |
| 2325301 E3.1 Power Plan _ REV1-Model |
| 2325301 E4.1 Power Riser Diagram & Electrical Schedules_REV1-Model |
| 2325301 E5.1 Electrical Details-Model |
| 2025-11-18T14:09:19-0500 | |
| David W Simes | |
| This item has been electronically signed and sealed by David W. Simes PE using a Digital Signature and date. Printed copies of this document are not considered signed and sealed and the signature must be verified on any electronic copies. |
File details come from the government source that posted it. Updated .