Attachment 0006 - 32 Subject Wooden Skid Large.pdf
PDF 163 KB Posted
- Attached to
- Warehouse Transportation Equipment
- Solicitation number
- 2031ZA25Q00077
About this file
This is an engineering drawing from the Department of the Treasury's Bureau of Engraving and Printing (BEP) for a large wooden skid, drawing number 55211BJ. The drawing provides detailed technical specifications for a wooden skid with overall dimensions of 25.88 inches in length, featuring three support beams spaced 9.94 inches apart. The width is 22.94 inches with a height profile of 4.25 inches, including specific measurements for ledges and supports (2.5 inches, 0.75 inches, and 0.63 inches).
The drawing includes standard engineering tolerances (H12 for holes), was created on January 14, 2016, and is drawn to a 1:10 scale. The document specifies that all dimensions are in inches and follows ASME Y14.5-2009 standards for dimensioning and tolerances. The drawing was created by S. Mohapatra and checked by DJW, with contact information provided as 202-874-3545. It is marked as nonpublic information from the BEP's Office of Engineering located at 14th and C Streets SW, Washington DC 20228.
View the file
Other files
Show all 11
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
2 2 2
25.88
9.94 9.94
22.94
2.5 10.22 0 .7
.6
.2
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
REVSIZE DWG NO
TITLE
SHEETSCALE DATE 01/14/2016
-B
32 SUBJECT WOODEN SKID - LARGE
55211BJ
SURF TRTMT
MATL TRTMT
MATL
U.S. DEPARTMENT OF THE TREASURY
BUREAU OF ENGRAVING AND PRINTING
OFFICE OF ENGINEERING
.125.125.125
S. MOHAPATRA
ANGLES.XXX.X .XXX/X
.125
ENGINEER
NONE
NONE
1:10 1 OF 1.5
ALL HOLES TO H12 TOLERANCE UNLESS OTHERWISE SPECIFIED
+.016-.004 -.020
14TH AND C STREETS SW WASHINGTON DC 20228 USA
DRAWN SMM
UNLESS OTHERWISE
SPECIFIED, ALL
DIMENSIONS ARE IN
INCHES
CHECKED DJW
202-874-3545
DATE APPROVEDDESCRIPTIONREVZONE
REVISION HISTORYREVISION
STATUS
REV SHEET
CAGE CODE
88002
INTERPRET DIM
AND TOL PER
ASME Y14.5-2009
TOLERANCES UNLESS OTHERWISE SPECIFIEDNonpublic Information: The information on this page is nonpublic information provided by the United States Department of the Treasury, Bureau of Engraving and Printing (“BEP”). As such, the information herein shall neither be duplicated nor disclosed to any third party without the express written consent of an authorized representative of the BEP. All rights, proprietary or otherwise, are reserved by the BEP.
| Sheet1 |
| Drawing View4 |
| Drawing View5 |
| Drawing View6 |
File details come from the government source that posted it. Updated .