Attachment 0003 - Currency Pallet Cap.pdf

27 KB Posted

Attached to
Warehouse Transportation Equipment
Solicitation number
2031ZA25Q00077
Issued by

About this file

Written by GovTribe AI ·

This file is a technical engineering drawing for a Currency Pallet Cap from the U.S. Department of the Treasury Bureau of Engraving and Printing's Office of Production Engineering. The drawing provides detailed specifications and dimensions for a pallet cap design, including integral strapping notches (2.50 x 1.50), overall dimensions of approximately 43.63 x 35.50 inches, and various cross-sectional views showing specific measurements and tolerances.

The drawing includes specific notes indicating that referenced areas should be smooth and free of voids to allow lifting by palletizer suction cups. It contains precise tolerances for holes (H12) and general dimensional tolerances for different measurement types. The document is marked as nonpublic information from the Bureau of Engraving and Printing (BEP), with drawing number 552929BC and sheet code 88002, dated February 13, 2019.

View the file

Other files

File Type Posted
2031ZA25Q00077 - RFQ_- Warehouse Transport Equipment Rev 2.pdf PDF
Amendment 0002.pdf PDF
Responses to Vendor questions for Solicitation 2031ZA25Q00077.pdf PDF
Amendment 0001.pdf PDF
2031ZA25Q00077 - RFQ_- Warehouse Transport Equipment Rev 1.pdf PDF
Attachment 0004 - 50 Subject Wooden Skid.pdf PDF
Attachment 0002 - Currency Pallet Measurements.pdf PDF
Attachment 0001 - Elevator Capacities.pdf PDF
Attachment 0006 - 32 Subject Wooden Skid Large.pdf PDF
2031ZA25Q00077 - RFQ_- Warehouse Transport Equipment.pdf PDF
Attachment 0005 - 32 Subject Wooden Skid Small.pdf PDF
Show all 11

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

11.75 10.75

16.50 15.50

B B

TJS2019-02-13

CHANGED TOLERANCES FOR NOTCH SIZE AND LOCATION

CHANGED HEIGHT REQUIREMENT AS LONG AS STRENGTH IS MET

AND TOL PER

disclosed to any third party without the express written consent of an authorized

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 3 2 1

REVSIZE DWG NO

TITLE

SHEETSCALE DATE 2019-02-13

BB

Currency Pallet Cap

55229BC

SURF TRTMT

MATL TRTMT

TOLERANCES UNLESS OTHERWISE SPECIFIED

88002 representative of the BEP. All rights, proprietary or otherwise, are reserved by the BEP.

INTERPRET DIM

BUREAU OF ENGRAVING AND PRINTING

OFFICE OF PRODUCTION ENGINEERING

.125.25.5

ANGLES.XXX.X .XXX/X

.25

See Technical Requirements Data Sheet

NONE

NONE

1:12

MATL

U.S. DEPARTMENT OF THE TREASURY

ALL HOLES TO H12 TOLERANCE UNLESS OTHERWISE SPECIFIED

14TH AND C STREETS SW WASHINGTON DC 20228 USA

DRAWN

INCHES

CHECKED TJS

DATE APPROVEDDESCRIPTIONREVZONE

.5

SPECIFIED DIM ARE IN

STATUS

SHEET REV

CAGE CODE

REVISION HISTORY

ALC

UNLESS OTHERWISE

ASME Y14.5-2009

REVISION

Nonpublic Information: The information on this page is nonpublic information provided by the United States Department of the Treasury, Bureau of Engraving and Printing (“BEP”). As such, the information herein shall neither be duplicated nor

D4 A7, C4

35.50 34.50

2X 2.50

1.50 INTEGRAL

STRAPPING NOTCHES

CUPS.

VOIDS TO ALLOW LIFTING BY PALLETIZER SUCTION

B

NOTES:

IT IS PREFERRED THAT AT A MINIMUM THE

REFERENCED AREAS ARE SMOOTH AND FREE OF

B

B

B

42.63 43.63

2X 2.50

1.50 INTEGRAL

STRAPPING NOTCHES

AA

B

B

DETAIL D

SCALE 1 : 6

2.13

1.13 .75

.25

SECTION B-B

33.75 32.75

A

SECTION A-A

0.13

A D

42.00 41.00

3.50

3.25

6.00 16.00

3.25

3.50

20.00

File details come from the government source that posted it. Updated .