Attachment 0004 - 50 Subject Wooden Skid.pdf
PDF 165 KB Posted
- Attached to
- Warehouse Transportation Equipment
- Solicitation number
- 2031ZA25Q00077
About this file
This is an engineering drawing/technical specification for a wooden skid produced by the U.S. Department of the Treasury's Bureau of Engraving and Printing (BEP) Office of Engineering. The drawing details a 50-subject wooden skid with precise measurements and specifications, including dimensions of 27.63 inches in length and 32.25 inches in width, constructed with 5/8" CDX material. The design includes specific tolerances (H12 for holes) and detailed measurements for component spacing and positioning.
The drawing is dated January 14, 2016, includes drawing number 55211BK, and features CAGE code 88002. The document is marked as nonpublic information from the BEP and requires express written consent for duplication or disclosure to third parties. The drawing includes both 2D orthographic views and a 3D isometric representation of the skid, with all dimensions specified in inches and following ASME Y14.5-2009 standards for dimensioning and tolerancing.
View the file
Other files
Show all 11
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
10.81
10.81
27.63
5/8" CDX
5/8" CDX 5
.5
6 2.5 2.5 6
.3
.7
5 5
32.25
2x R1 typ.
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
REVSIZE DWG NO
TITLE
SHEETSCALE DATE 01/14/2016
-B
50 SUBJECT WOODEN SKID
55211BK
SURF TRTMT
MATL TRTMT
MATL
U.S. DEPARTMENT OF THE TREASURY
BUREAU OF ENGRAVING AND PRINTING
OFFICE OF ENGINEERING
0.1250.1250.125
S. MOHAPATRA
ANGLES.XXX.X .XXX/X
0.125
ENGINEER
NONE
NONE
1:10 1 OF 1.5
ALL HOLES TO H12 TOLERANCE UNLESS OTHERWISE SPECIFIED
+.016-.004 -.020
14TH AND C STREETS SW WASHINGTON DC 20228 USA
DRAWN SMM
UNLESS OTHERWISE
SPECIFIED, ALL
DIMENSIONS ARE IN
INCHES
CHECKED DJW
202-874-3545
DATE APPROVEDDESCRIPTIONREVZONE
REVISION HISTORYREVISION
STATUS
REV SHEET
CAGE CODE
88002
INTERPRET DIM
AND TOL PER
ASME Y14.5-2009
TOLERANCES UNLESS OTHERWISE SPECIFIEDNonpublic Information: The information on this page is nonpublic information provided by the United States Department of the Treasury, Bureau of Engraving and Printing (“BEP”). As such, the information herein shall neither be duplicated nor disclosed to any third party without the express written consent of an authorized representative of the BEP. All rights, proprietary or otherwise, are reserved by the BEP.
| Sheet1 |
| Drawing View4 |
| Drawing View5 |
| Drawing View6 |
File details come from the government source that posted it. Updated .