Attachment 0002 - Currency Pallet Measurements.pdf

28 KB Posted

Attached to
Warehouse Transportation Equipment
Solicitation number
2031ZA25Q00077
Issued by

About this file

Written by GovTribe AI ·

This is a technical engineering drawing detailing specifications for a Currency Pallet produced by the U.S. Department of the Treasury Bureau of Engraving and Printing (BEP). The drawing shows detailed dimensions and tolerances for a pallet design, including sections A-A and B-B, with overall dimensions of approximately 43.63" x 35.50" x 6.13".

Key specifications include integral strapping notches (2.50" x 1.50"), minimum deck areas that must be smooth and free of voids for palletizer suction cups, and H12 tolerance requirements for all holes unless otherwise specified. The drawing includes precise measurements for various components, with general tolerances of ±.25 for X/X dimensions, ±.5 for .X dimensions, ±.25 for .XX dimensions, and ±.125 for .XXX dimensions. The drawing was revised on 2019-02-13 to modify height requirements and notch size/location tolerances.

View the file

Other files

File Type Posted
2031ZA25Q00077 - RFQ_- Warehouse Transport Equipment Rev 2.pdf PDF
Amendment 0002.pdf PDF
Responses to Vendor questions for Solicitation 2031ZA25Q00077.pdf PDF
Amendment 0001.pdf PDF
2031ZA25Q00077 - RFQ_- Warehouse Transport Equipment Rev 1.pdf PDF
Attachment 0004 - 50 Subject Wooden Skid.pdf PDF
Attachment 0001 - Elevator Capacities.pdf PDF
Attachment 0006 - 32 Subject Wooden Skid Large.pdf PDF
Attachment 0003 - Currency Pallet Cap.pdf PDF
2031ZA25Q00077 - RFQ_- Warehouse Transport Equipment.pdf PDF
Attachment 0005 - 32 Subject Wooden Skid Small.pdf PDF
Show all 11

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

16.50 15.50

11.75 10.75

A5,B5,C21

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 3 2 1

REVSIZE DWG NO

TITLE

SHEETSCALE DATE 2019-02-13

BB

Currency Pallet

55229BB

SURF TRTMT

MATL TRTMT

CHANGED HEIGHT REQUIREMENT AS LONG AS STRENGTH IS METB

CHANGED TOLERANCES FOR NOTCH SIZE AND LOCATION

INTERPRET DIM

BUREAU OF ENGRAVING AND PRINTING

OFFICE OF PRODUCTION ENGINEERING

.125.25.5

ANGLES.XXX.X .XXX/X

.25

See Technical Requirements Data Sheet

NONE

NONE

1:12

MATL

U.S. DEPARTMENT OF THE TREASURY

ALL HOLES TO H12 TOLERANCE UNLESS OTHERWISE SPECIFIED

14TH AND C STREETS SW WASHINGTON DC 20228 USA

DRAWN

INCHES

CHECKED ALC

DATE APPROVEDDESCRIPTIONREVZONE

.5

SPECIFIED DIM ARE IN

STATUS

SHEET REV

CAGE CODE

REVISION HISTORY

TJS

UNLESS OTHERWISE

ASME Y14.5-2009

REVISION

88002 disclosed to any third party without the express written consent of an authorized

AND TOL PER

TOLERANCES UNLESS OTHERWISE SPECIFIED

representative of the BEP. All rights, proprietary or otherwise, are reserved by the BEP.

2019-02-13 TJS

Nonpublic Information: The information on this page is nonpublic information provided by the United States Department of the Treasury, Bureau of Engraving and Printing (“BEP”). As such, the information herein shall neither be duplicated nor

D8 B

3.25

3.50

20.00

16.00

3.25

3.50

6.00

B

B

AA

A0.13

C 43.63 42.63

2X 2.50

1.50 INTEGRAL STRAPPING NOTCHES

AND FREE OF VOIDS IF OTHER REQUIREMENTS LISTED

B

ON THE TECHNICAL REQUIREMENTS DATA SHEET ARE STILL MET.

B

NOTES:

REFERENCED DECK AREAS ARE THE MINIMUM AREAS THAT

SHALL BE SMOOTH AND FREE OF VOIDS TO ALLOW LIFTING BY

PALLETIZER SUCTION CUPS. A LARGER AREA MAY BE SMOOTH

B

SECTION B-B

24.50 23.50

2X 5.13 MAX

33.75 32.75

6X

A

0.13

B

34.50 35.50

2X 2.50

1.50 INTEGRAL STRAPPING NOTCHES

B

DETAIL D

SCALE 1 : 6

5.38 6.13

.75

.25 SECTION A-A

0.13 A

D

3.50

4.00 30.25 29.75

42.00 41.00

File details come from the government source that posted it. Updated .