Addendum_3_compiled.pdf

Fort Yuma Health Care Center /IHS Project PH1FY107C7 Final Construction Documents

DPS Project 08-0110.001

MEDICAL EQUIPMENT 11 70 00 - 1

SECTION 11 70 00 MEDICAL EQUIPMENT

PART 1 - GENERAL

1.1 RELATED DOCUMENTS

A. Drawings, Specifications and general provisions of the Contract, including General and

Supplementary Conditions, Division 01 Specification Sections and Medical Equipment Project

Manual (Room x Room lists and data sheets.)

1.2 SUMMARY

A. This Section includes requirements pertaining to provision of and installation of medical equipment. Each medical equipment item is identified on the plans and in the schedules by a unique identifying tag (CAD ID). Items specified herein are CC and OC, with procurement and/or install provided by the Contractor through a Medical Equipment Coordinator provided by the Contractor, including all coordination, accessories, attachments, delivery, placement, for a complete and fully functional installation.

B. Contractor items are identified in the Schedule attached to this section and in the Medical

Equipment Project Manual, department, room x room listing under “F/I” Furnish and Install per the following codes:

1. C/C: Contractor furnished and Contractor installed equipment.

a. Contractor to furnish and install all equipment specified, with all coordination provided by the Contractor for a complete and fully functional installation.

2. OC: IHS Furnished and Contractor Installed medical equipment.

a. IHS to furnish and Contractor to install all equipment with all installation and coordination requirements provided by the Contractor for a complete and fully functional installation.

3. OV: IHS Furnished and Vendor Installed Equipment.

a. IHS to furnish and Vendor to install all equipment with rough-in, utility connections and structural supports/bracing provided by the Contractor as detailed in the construction drawings and specifications. Contractor to coordinate activities of the Owners Vendor with construction schedule and activities.

4. Related Sections:

a. Division 01 - General Requirements

b. Division 22 – Plumbing

c. Division 23 – Heating, Ventilating and Air Conditioning

d. Division 26 – Electrical

e. Division 27 – Communications

f. Division 28 – Electronic Safety and Security

5. Related Drawings:

Addendum 3 - 2015-12-2

MEDICAL EQUIPMENT 11 70 00 - 2

a. Equipment Drawings (“I701” series).

b. Floor plans, indicating the location of floor, wall and ceiling mounted items.

c. Typical wall mounting heights and wall backing drawings.

6. Related Medical Equipment and Furnishings Information:

a. Volume B1 Medical Equipment and Furnishing Room by Room Listing

b. Volume B2 Medical Equipment and Furnishing Product Data Sheets.

1.3 SUBMITTALS

A. Submit for all CC items. Submittals will require Owner (Indian Health Service (IHS) and

Architect approval prior to procurement and/or installation. Submit all of the listed items herein, with information sufficient to evidence full compliance with the specifications necessary to obtain approval. Submit all product selections for review, approval, including but not limited to: materials, finishes, colors, options, accessories and complimentary products. Provide for review all warranties and service contracts and any extended warranty or service options.

B. Shop Drawings: Submit for all items, “CC”, requiring either fabrication or coordination of utilities, ceiling structural support, wall structural support or work from other Sections or both.

Show actual layout of installations pertinent to this work. Standard printed sheets containing information not applicable to this work are not acceptable as shop drawings. Indicate details of construction, rough-in requirements, and relation to work of other Sections. Verify job conditions affecting the work and obtain accurate measurements for incorporation into shop drawings.

C. Samples: Furnish samples of materials to be provided and manufacturer’s full range of color selections as applicable for items requiring approval of material finishes and colors.

D. Submit and highlight all applicable options for Owner review for all items which optional accessories are provided.

E. Equipment Lists: Within 90 days after award of Contract and before any equipment is ordered, submit to the Owner for review and approval, five copies of the CC Equipment Listing.

1. Supplement lists with catalog pages or data sheets, diagrams, drawings, and other descriptive data for each referenced item, as necessary to evaluate utility considerations, dimensions, and appearance of the items and materials

2. Submit equipment lists in the following manner

a. Submit each set of lists in a manner suitable for storing in a loose-leaf three-ring binder.

b. Index the lists sequentially by CAD ID number as used in the Contract documents

F. Operating Manuals and Service Data

1. Upon completion of the project, furnish (3) copies of service/maintenance manual for each type of equipment which will require service or maintenance

MEDICAL EQUIPMENT 11 70 00 - 3

2. Each manual shall contain operating instructions and information required for performing periodic minor maintenance on the equipment. Include the following information:

a. Identification of each major part of the unit by the manufacturer's part number.

Wiring diagrams for electrical items and components. List of necessary service parts and equipment for maintenance

G. Accessory Catalogs.

1. Upon completion of the Project, furnish two copies of the manufacturer's catalogs containing optional accessory items available for all equipment.

H. Structural Calculations:

1. For each equipment item requiring anchorage and/or seismic supports, furnish (3) copies of the manufacturers approved anchorage/seismic details and calculations, Signed and

Sealed, applicable to the jurisdiction of the project

1.4 QUALITY ASSURANCE

A. Medical Equipment Procurement and Installation Subcontractor

1. Contractor shall employ the services of a Medical Equipment Procurement and

Installation Subcontractor to perform the work specified in this section. Subcontractor shall provide appropriately trained personnel to oversee and perform the work including but not limited to:

a. Prepare, coordinate, assemble, process all submittals

b. Provide scheduling to coordinate medical equipment with IHS procurement and construction/occupancy.

c. Provide medical equipment delivery and installation coordinated with the construction schedule and occupancy.

d. Provide oversight for delivery and storage of medical equipment prior to installation.

e. Provide oversight of medical equipment installation, start-up, testing and certifications. Assist the IHS with training

f. Provide coordination for all OV medical equipment delivery and installation.

g. Provide asset tagging and close-out documentation, warranties and service contracts.

h. Provide certification documentation for approval; that the Subcontractor is qualified and regularly engaged in the procurement and installation of medical equipment and the personnel are qualified and have a minimum of (5) years of documented experience in the planning, procurement and installation of medical equipment. Submit qualifications for approval.

B. Code Requirements: Conform to, or exceed applicable State and Local Codes.

C. Factory Tests: At point of manufacture, examine and test products under this Section for proper capacity, function and compliance with Specification requirements. Perform such testing in

MEDICAL EQUIPMENT 11 70 00 - 4

accordance with applicable referenced Specifications. Products installed under this Section are subject to additional acceptance examination and testing after installation at the Project Site.

D. Manufacturer's Products: It is not the intention of this Specification to limit consideration to products of specific manufacturers. The following standards, establishes the characteristics for which submitted pieces of equipment will be reviewed and approved by the IHS. The standards are as follows:

1. Size of equipment.

2. Function of equipment.

3. Standard and listed accessories.

4. Control of equipment.

5. Performance of equipment.

6. Construction of equipment.

E. Patient Lift Systems Certification: Provide Certification of compliance for all Patient Lifting

Systems. Certifications shall be provided by an independent third party accredited testing agency who will conduct testing to ensure that the ceiling lift and charging system are safe and in compliance with the following standards: ISO 10535 and UL 60601-1. Submit certification and test reports to the Owner.

1.5 WARRANTY

A. Provide manufacturers written warranty for all items listed. Provide warranty for a minimum of

(2) years against defects in materials and workmanship. Warranty shall provide for material, labor and all associated replacement and/or repair costs required to provide for a fully operational equipment replacement or repair. Submit manufacturers and installers standard service contract beyond the warranty period for IHS review.

B. Provide routine warranty service in accordance with manufacturer's warranty requirements, for a period of 12 months after the date of acceptance by IHS. Perform work during regular working hours. During the warranty service period, include 24-hour emergency service, with

(12) hour response time, without additional cost to the IHS. Perform service only by factory trained personnel. Maintain a maintenance log of all service orders performed during the warranty period

PART 2 - PRODUCTS

2.1 MATERIALS

A. General: Materials shall be in accordance with requirements specified for the equipment listed on the “Items List” found in the Equipment Submittal documents. All materials shall be new and free from defects and imperfections that might affect both the serviceability and appearance of the finished product. Where finish or materials or both are not specified, the manufacturer's standard finish or materials is acceptable, providing it is suitable for conditions of use.

B. Electrolytic Prevention: Make appropriate provisions to prevent electrolysis where metal parts are welded or otherwise fastened together.

MEDICAL EQUIPMENT 11 70 00 - 5

2.2 ELECTRICAL COMPONENTS

A. Electrical Approval: Electrically operated equipment shall be listed by the Underwriters

Laboratories, Inc., wherever standards have been established by that Agency. In lieu of UL approval, considerations will be given to certified test reports of a nationally recognized independent testing laboratory competent to perform such testing, indicating conformance to all requirements of the applicable UL standard, including method of test.

B. Devices and Controls Required: All manual or automatic controls and protective or signal devices necessary for the operation of the equipment and wiring required, associated with equipment but not shown on the Electrical Plans shall be furnished and installed as part of the work of the Specification Section in which the equipment is specified

2.3 PLUMBING COMPONENTS

A. Sanitary Safeguard: All equipment with direct attachment to the water supply system shall be provided with backflow prevention devices to prevent polluted water or waste into the water supply system and into aseptic portions of equipment.

2.4 INFORMATION TECHNOLOGY INERFACE

A. Medical Equipment with data output shall integrate with facility information systems such as

RMS, Imaging software and Electronic Medical Records. Coordinate integration with owners

IT representatives.

2.5 NAME PLATES

A. Manufacturer's Identification: Unless otherwise specified, the following listed applicable information shall be affixed in a permanent manner to each item of equipment. The information shall be located in a suitable location on the product and shall be proportionate to the size of the equipment:

1. Name of manufacturer or registered trade name.

2. Manufacturer's type designation.

3. Serial number.

4. Utility ranges or capacity, such as voltage and watt rating or voltage and amperage rating if electrically heated or powered.

2.6 SEISMIC REQUIRMENTS

A. Install equipment per project seismic requirements, reference Structural drawings and specifications. For all equipment items, provide manufacturers standard seismic supports, anchors and calculations in compliance to all applicable codes and standards.

B. Submit manufacturer seismic details and calculations for approval by the local authorities having jurisdiction.

MEDICAL EQUIPMENT 11 70 00 - 6

2.7 PATIENT LIFTING SYSTEMS

A. Patient Lift System:

1. Provide patient lifting systems in configurations as shown on the plans in the following capacities:

2. Standard room patient lift: Minimum load rating: 550lbs

3. Basis of Design: Liko, Likorail 250 Transverse lifts and linear track lifts as shown on plans.

B. Ceiling Track System:

1. The ceiling track shall be made from high strength extruded aluminum T66081-T5 at a minimum thickness of 3/16” (4.8mm). Provide anchor supports along entire track length.

Track shall be finished with a white baked enamel finish. Contractor and manufacturer to coordinate lift rails installation with ceiling system and ceiling mounted items.

C. Lift Unit:

1. The Lift shall be constructed of a steel face system (2205lbs / 1000kg, tested) driven by a gear reduced high torque motor.

2. The Lift system shall have the following features:

3. Electronic soft-start and soft-stop motor control

4. Emergency lowering device

5. Emergency stopping device

6. Current limiter for circuit protection in case of overload.

7. Safety device that stops the motor to lift when batteries are low.

8. Lifting speed: 2.3in/s (6 cm/s), 1.6in/s (3.5cm) in full capacity

9. Horizontal displacement speed: 5.9in/s (150mm/s)

10. Horizontal axis motor: 24VDC at 62 watts and vertical axis motor at 110 watts

11. Emergency brake (in case of mechanical failure)

12. Strap length up to 90in (2.3m) tested for 2998lbs (1360kg)

13. Cab: VO plastic–fire retardant, UL 94

14. Wireless remote control (optional)

15. 3. Motors

16. Vertical Movement-DC Motor

17. Type: Class A, fully enclosed, permanent magnet.

18. Rating: 24Vdc, 1.1A, 110W, 4000RPM, 0.3N-m.

19. Mounting: Secured to chassis.

20. Horizontal Movement-DC Motor

21. Type: Fully enclosed, permanent magnet, integral reducer.

22. Rating: 24Vdc, 1.8A, 62W, 260RPM, 1.0N-m.

23. Mounting: Secured to chassis.

24. Provide motor carriage designed to span required gap in ceiling rails to allow motor to be transferred from patient room to patient room toilet/shower. See plans for details.

D. Batteries

1. The life cycle (number of charging cycles) for batteries shall be in compliance with IEC

801-2.

2. Provide rechargeable batteries with up to 120 transfers with a load of 250lbs and up to 70 transfers with its maximum load.

MEDICAL EQUIPMENT 11 70 00 - 7

E. Charger

1. Charger Input: 100-240 Vac, 50/60 Hz.

2. Charger Output: 27 Vdc, 1 A max.

3. Provide In-rail charging option. Coordinate above ceiling electrical requirements.

F. Straps and sling

1. The straps shall be made of threaded nylon. The straps shall ensure the patient’s safety by preventing the patient from falling out of the sling.

2. The sling shall be made from a polyester/nylon net material that is pliable, breathable and easy to use. The sling shall cradle the body of the patient.

PART 3 - EXECUTION

3.1 COORDINATION

A. Prior to commencing work, coordinate work of equipment requirements with work of related

Sections to obtain proper installation of items. Contractor shall acquaint himself with work of other Sections whose work abuts, joins, or is affected by or related to items specified in the applicable Sections.

B. Carefully examine drawings and manufacturers’ shop drawings and instructions and directions for proper location and installation of materials and equipment to avoid substantial changes.

C. Coordinate appropriate pipe connection sizes and locations for direct connection to equipment items shown on documents.

D. Coordinate appropriate power and data / communication requirements, locations and mounting heights of the equipment items identified in the documents.

E. Review surfaces and conditions under which equipment is to be installed. Verify measurement of space for equipment and means of access for installation. Verify the service rough-ins and backing plates are in place. Report to Architect in writing items that may be detrimental to equipment or equipment operation.

F. Drawings show arrangement and location of items of equipment. If it is necessary to vary from arrangement shown, because of structural, mechanical, electrical or other considerations, make such variations only after approval of Architect and at no additional cost to the Owner.

G. Verify dimensions at building. Confirm that equipment will be able to be moved through the building in order to reach its designated location. Measure recesses and openings at building and provide trim pieces, fillers and closures in sizes required

H. Contractor to coordinate all specified brackets with Owner furnished final selected televisions, monitors and any/all devices to be supported by the specified brackets. Provide brackets compatible with mounting requirements of the final selected televisions and devices. Provide wall backing per selected manufacturers model and recommendations. Locate electrical and data outlets per manufacturer’s recommendations and locations coordinated with the contract documents.

MEDICAL EQUIPMENT 11 70 00 - 8

3.2 EXAMINATION

A. Check for shipping damage as equipment is received. Note damages and reject units which have scratches, dents or other defects that cannot be readily corrected.

B. Prior to start of work, examine surfaces and areas to receive equipment to insure that rough-ins and substrates are correct, that equipment will fit as indicated on Drawings, that surfaces are clean, dry, and that preparatory work is complete

C. Proceed with installation only after unsatisfactory conditions have been corrected.

3.3 DELIVERY, STORAGE AND PROTECTION

A. Contractor shall provide a secured and conditioned warehouse space available on a 24 hr / 7 day per week basis for the delivery of Owner procured medical equipment items. Medical

Equipment Coordinator shall coordinate warehouse provisions and procedures with IHS

Contracting Officer. Contractor to verify that all items are received, undamaged and available for install. Contractor shall report to the IHS the status of delivery and any deficiencies.

B. Packaging and Transporting: Each unit of equipment shall be placed in a substantial shipping container or crate for safe transportation to final destination. The shipping container or crate for heavy equipment shall be on skid construction to facilitate handling by lift equipment.

C. Marking: Clearly and legibly indicate on exterior of each container or crate the shipping address and a brief description of contents. Fasten to outside of container a packing list and complete instructions for uncrating equipment and setting it in place. Protect such information in a weatherproof envelope.

D. Protection: During storage and until completion and acceptance properly protect all materials and equipment from injury and damage. Before acceptance, remove all protective coverings, thoroughly clean surfaces, inside and outside, and leave equipment free from defects, damages, and blemishes.

3.4 INSTALLATION OF EQUIPMENT

A. Cutting of Construction: Carefully layout work in advance. Cutting shall be done carefully, damage to buildings, and piping, wiring or equipment as a result of cutting for installation shall be repaired by skilled mechanics of the trade involved, at no additional expense to the Owner.

B. Setting and Connection: Install as indicated on the drawings. Install and connect equipment plumb and make level in accordance with the manufacturer's instructions and recommendations.

Secure anchor and attach items and accessories. Make connections between equipment and work of other Sections in a neat manner, and install equipment so that work of other Sections will not be injured or damaged.

Where applicable provide required filler and trim pieces to close spaces between equipment and work of other Sections. Set and connect the equipment plumb and true to level in accordance with the manufacturer's instructions and recommendations. Attach items and accessories.

MEDICAL EQUIPMENT 11 70 00 - 9

Make connections between equipment and other work in a neat manner, and install the equipment so as not to damage other work.

C. Cleaning and Adjusting: Carefully test and adjust equipment for proper operation. Lubricate moving parts if required by the manufacturer's specifications. Prior to acceptance of the Project, clean medical equipment both inside and outside, and leave equipment free from defects, damage, and blemishes.

D. Installation: Install all equipment in compliance with manufacturer’s written instructions and installation procedures

E. Clean and polish equipment in accordance with manufacturer’s recommendations. Leave ready for use with copy of instruction manual attached to equipment

F. Units shall be protected after installation during remainder of construction.

G. Provide and install all anchorage devices, seismic anchors and bracing, fasteners, shims and materials as required to provide a complete and fully functional installation.

H. Contractor to supply all start-up supplies for medical equipment for a fully operational installation. Vendor shall supply to the IHS a listing of all needed supplies for ongoing equipment operation for each piece of equipment requiring additional supplies for operation.

3.5 MEDICAL EQUIPMENT SCHEDULE

A. Contractor to provide and maintain an equipment procurement and installation schedule coordinated with the construction phasing. Contractor to update and review the schedule with

Contractor Officer on weekly basis. Schedule will at a minimum list purchase date, shipping status, shipping arrival at warehouse and installation date.

3.6 OPERATION, TESTING AND CERTIFICATION

A. Provide all items necessary to make equipment operational.

B. Provide appropriate trained personnel to energize, commission, inspect, electrical safety check, calibrate, certify, and provide all required technical testing for new medical equipment.

Contractor shall provide documentation, test reports and certification documentation attesting that the equipment is properly installed, functional, safe, calibrated and ready for its indented use.

C. Provide certification documentation for approval, that medical equipment installation personnel are qualified, trained, certified, authorized, licensed and have a minimum of (3) three years documented experience and is BMET certified or have equivalent certifications. Submit qualifications for approval

MEDICAL EQUIPMENT 11 70 00 - 10

3.7 TESTS AND INSPECTIONS

A. General: Unless otherwise specifically set forth in the technical Section, examinations and tests set forth in the Specification or as otherwise appropriate or necessary to insure that the equipment conforms to Specification requirements shall be performed at no additional expense to the Owner.

B. Prior to installation, thoroughly examine the equipment, materials, and components for both visual defects and conformance with Specifications

C. After installation, the equipment shall be inspected and tested under operating conditions. If inspections or tests show defects, such defects shall be corrected, defective material replaced and inspection and test repeated. Such corrections, replacement and retesting shall be made at no additional expense to the IHS.

D. Equipment will be considered defective if it does not pass tests and inspections.

3.8 DEMONSTRATION

A. Engage a factory-authorized service representative to train Owners staff and maintenance personnel to adjust, operate, and maintain medical equipment.

3.9 MEDICAL EQUIPMENT SCHEDULES

A. Basis of Design: Manufacturers offering products of similar design, function and quality are acceptable with prior approvals.

B. Contractor Furnished – Contractor Installed CC Medical Equipment

1. See Medical Equipment and Furniture Project Manual Data Sheets for additional information on Basis of Design Products.

CAD ID Description

C-134313 Hood, Canopy Exhaust

C-267774 Hood, Fume, Canopy

LFT0048 Lift, Patient, Ceiling, 1-Bed

C-272741 Lift, Patient, Ceiling, Custom Track

LIG0117 Light, Exam/Procedure, Dual, Ceiling

LIG0093 Light, Exam/Procedure, Single, Ceiling

C-119237 Rack, Prescription Hanging

MEDICAL EQUIPMENT 11 70 00 - 11

C. Owner (IHS) Furnished – Contractor Installed OC Medical Equipment

AMA0003 Amalgamator, Dental

ANA0145 Analyzer, Lab, Coagulation, Whole Blood

ANA0256 Analyzer, Lab, Hematology

C-275135 Analyzer, Lab, Hemoglobin (Glyco-Hemoglobin)

ANA0361 Analyzer, Lab, Urinalysis, Semi-Automated

BSY0002 Balance System, Testing/Training

C-104664 Balance, Fitter Rocker & Wobble Boards

C-115166 Ball, Medicine

BRS0058 Bars, Parallel, Motorized

C-115162 Bath, Paraffin

BAT0052 Bath, Water, Dental

BCH0019 Bench, Work, Steel w/ Power

BCH0025 Bench, Work, Wood

BIN0001 Bin, Dental, Plaster, Benchtop

BFU0006 Biofeedback Unit, General

C-115165 Bolsters (Assortment)

BRK0098 Bracket, Computer Workstation, Wall

BRK0688 Bracket, Monitor, Wall

BRK0250 Bracket, Projector, Ceiling Mount

BRK0190 Bracket, Television, Wall, Flat Panel

BRK0190 Bracket, Television, Wall, Flat Panel

BUK0014 Bucket, Kick

BUK0014 Bucket, Kick

CST0036 Cabinet, Storage, Clinical, Flammable Items

CST0052 Cabinet, Storage, Clinical, Flammable Items

CST0503 Cabinet, Storage, Clinical, Supply/Accessory

CSN0073 Cabinet, Storage, Non-Clinical, Key Control

C-116314 Camera, Fundus, Digital

CTK0046 Cart / Truck, Hand

MEDICAL EQUIPMENT 11 70 00 - 12

SPC0670 Cart / Truck, Linen, Convertible

CTK0104 Cart / Truck, Pallet, Powered

CTK0036 Cart / Truck, Platform

CTK0679 Cart / Truck, Platform

CTK0716 Cart / Truck, Soiled Utility

CHC0088 Cart, Chart, Medical Records Files

CPC0084 Cart, Computer, Workstation

CYL0146 Cart, Cylinder, D&E, Multi

CYL0321 Cart, Cylinder, D&E, Multi

CYL0322 Cart, Cylinder, D&E, Single

EQC0061 Cart, Equipment, Tools

EQC0087 Cart, Equipment, Weights

HSK0017 Cart, Housekeeping, Polymer

HSK0017 Cart, Housekeeping, Polymer

SPC0526 Cart, Supply, Modular

UTC0091 Cart, Utility, Polymer

UTC0029 Cart, Utility, Stainless

CEN0114 Centrifuge, General Purpose, Countertop

CEN0114 Centrifuge, General Purpose, Countertop

CEN0261 Centrifuge, General Purpose, Countertop

C-280914 Chair Glide System

CHA0658 Chair, Clinical, Blood Draw, Bariatric

TBL0318 Chair, Clinical, Exam, Podiatry

CHA0193 Chair, Clinical, Procedure, EENT

VIS0005 Chart, Visual Acuity, Wall

VIS0010 Chart, Visual Acuity, Wall, Digital

COU0009 Counter, Pill

CRY0012 Cryosurgical Unit, General

CUT0005 Cutter, Cast w/ Vacuum

DFB0079 Defibrillator, Transport, Advisory

C-115120 Desk, Fitting/Dispensing, Optical

IDS0011 Diagnostic System, Integrated

C-134311 Dishwasher

MEDICAL EQUIPMENT 11 70 00 - 13

GLV0132 Dispenser, Glove, Triple Box

DSP0043 Dispenser, Hand Sanitizer, Wall Mount

DSP0043 Dispenser, Hand Sanitizer, Wall Mount

CST0368 Dispenser, Personal Protection, Wall Mount

DIS0270 Disposal, Sharps, Floor Cart

DIS0257 Disposal, Sharps, Wall Mount

DLR0002 Distiller, Water

DOP0014 Doppler, Fetal Heart

C-116338 Drill, Podiatry w-Vacuum

C-116337 Drill, Podiatry w-Vacuum & Cart

DRL0023 Drill, Press, Floor

C-115167 Dumbbells (Assortment)

C-116375 EEG/Neurofeedback Clinical System

ESU0053 Electrosurgical Unit, LEEP

ESU0064 Electrosurgical Unit, Monopolar, with Smoke Evacuator

ERG0074 Ergometer, Bicycle, Recumbent

ERG0292 Ergometer, Bicycle, Recumbent

ERG0101 Ergometer, Upper Body

EXE0340 Exerciser, Elliptical

EXE0421 Exerciser, Elliptical/Stepper, Recumbent

EXE0133 Exerciser, Gym System

FLU0003 Fluidotherapy Unit, Mobile

FRZ0865 Freezer, Laboratory, 1 door

FRZ0204 Freezer, Laboratory, Undercounter

FRZ0214 Freezer, Laboratory, Undercounter

C-115123 Gauge, Distance, Pupilary

HAM0058 Hamper, Linen

HAM0058 Hamper, Linen

C-117887 Handpiece, Electric, Dental

POL0003 Hood, Polishing, Dental

ICE0304 Ice Machine, Dispenser, Nugget, Countertop

IMM0011 Immobilizer, Infant

KER0001 Keratometer, General

MEDICAL EQUIPMENT 11 70 00 - 14

LAD0001 Ladder, Finger

C-280699 Lamp, Slit

LNS0012 Lensometer, Manual

LNS0012 Lensometer, Manual

LFT0121 Lift, Patient, Bariatric

LCU0008 Light, Curing, Dental

LDN0015 Light, Dental, Ceiling Track

LDN0015 Light, Dental, Ceiling Track

LIG0272 Light, Exam/Procedure, Single, Mobile, Articulating Arm

LIG0270 Light, Exam/Procedure, Single, Mobile, Gooseneck Arm

C-114873 Magnetic Tool Holder

MAL0028 Mail Machine, Postage, Low Volume

MAT0026 Mat, Floor, Exercise

MIC0187 Microscope, Binocular

MIC0187 Microscope, Binocular

C-115118 Mirror, Optical Rack, Wall Mtd

MIX0022 Mixer, Dental, Vibrating

MIX0006 Mixer, Rocker

C-130605 Monitor Mount, Wall

MOB0001 Monitor, O.B., Antepartum, Fetal, Twin

MNR0038 Monitor, Temperature, Refrigerator/Freezer

MNR0074 Monitor, Temperature, Refrigerator/Freezer

OPE0027 Ophthalmoscope, Binocular, Indirect

OVN0282 Oven, Domestic, Microwave, Countertop

PAN0010 Pan, Splint

PHL0001 Phlebotomy Station, Wheelchair, Wall Mount

PHR0007 Phoropter, Refractor

C-114875 Pressure Pot, Dental, Electric

PRN0488 Printer, Label, Barcode

PRN0392 Printer, Video Image, Color

PUL0010 Pulley System, Dual Column, Triplex, Wall Mount

ASP0010 Pump, Suction/Aspirator, General, Portable

RCK0002 Rack, Apron & Glove, Wall Mount

MEDICAL EQUIPMENT 11 70 00 - 15

RCK0020 Rack, Apron, Wall Mount

RCK0081 Rack, Crutch/Cane/Walker

C-115119 Rack, Display, Spectacle, Wall Mtd

RCK0203 Rack, Dunnage, 36 in.

RCK0194 Rack, Exercise Ball, Floor

RCK0490 Rack, Weights, Floor

C-134312 Range

RKE0003 Refractor / Keratometer, Automatic

RKE0018 Refractor / Keratometer, Automatic, Handheld

REF0870 Refrigerator, Commercial, Undercounter

REF1444 Refrigerator, Domestic with Freezer

C-134307 Refrigerator, Full-size

REF1047 Refrigerator, Laboratory, 2 door

REF1048 Refrigerator, Laboratory, 3 door

REF0231 Refrigerator, Laboratory, Undercounter

REF0231 Refrigerator, Laboratory, Undercounter

REF1602 Refrigerator, Laboratory, Undercounter

SBR0016 Sandblaster, Dental

SCL0036 Scale, Clinical, Adult, Digital, Floor

SCL0204 Scale, Clinical, Adult, Personal

SCL0122 Scale, Clinical, Adult, Wheelchair

SCL0122 Scale, Clinical, Adult, Wheelchair

SCL0180 Scale, Clinical, Infant/Pediatric, Digital

SCE0013 Scaler, Ultrasonic

SNR0105 Screener, DPOAE/TEOAE

SHL0047 Shelving, Pallet / Bulk

SHL0298 Shelving, Solid, Steel, 36

SHL0293 Shelving, Solid, Steel, 36

SHL0304 Shelving, Solid, Steel, 48

SHL0714 Shelving, Solid, Steel, 60

SHL0309 Shelving, Solid, Steel, 72

SHL0070 Shelving, Wire, Chrome, 48

SHL0173 Shelving, Wire, Stainless Steel, 48

MEDICAL EQUIPMENT 11 70 00 - 16

SHR0031 Shredder, Paper, Heavy Duty

SIM0013 Simulator, Work, Whole Body

SDM0019 Stadiometer, Portable

SDM0004 Stadiometer, Wall Mount

STA0014 Stairs, Training, Straight

IVS0124 Stand, IV, Stainless Steel

MAY0037 Stand, Mayo, Thumb-Operated

OPS0009 Stand, Ophthalmic, Instrument

STE0305 Sterilizer, Countertop

STE0007 Sterilizer, Countertop

STE0494 Sterilizer, Dental, Cassette

STL0226 Stool, Dental, Assistant

STL0013 Stool, Dental, Doctor

STL0038 Stool, Exam, Cushion-Seat

STL0038 Stool, Exam, Cushion-Seat

STL0038 Stool, Exam, Cushion-Seat

STL0145 Stool, Exam, w/Backrest

STL0145 Stool, Exam, w/Backrest

STL0178 Stool, High, w/Backrest

STL0291 Stool, High, w/Backrest

STL0110 Stool, Step

STR0122 Stretcher, Procedure / Recovery

C-116376 Table, EEG/Neurofeedback

TEQ0012 Table, Equipment, Instrument, Eye

TBL0175 Table, Exam/Treatment, Hi-Low

TBL0075 Table, Exam/Treatment, Pediatric

TBL0075 Table, Exam/Treatment, Pediatric

TBL0105 Table, Exam/Treatment, Powered

TBL0130 Table, Exam/Treatment, Stationary

TBL0341 Table, Exam/Treatment, Traction

C-116291 Table, Eye Instrument, Electric

TIM0015 Table, Imaging, Ultrasound

TIN0022 Table, Instrument, 30-36 inch

MEDICAL EQUIPMENT 11 70 00 - 17

TMT0055 Table, Mat, Hi-Low, Electric, 60 inch

HYD0015 Therapy Unit, Chilling, Mobile

HYD0003 Therapy Unit, Moist Heat, Mobile

TON0006 Tonometer, Hand Held

C-114874 Torch, Micro

TRD0090 Treadmill, Exercise (Rehab/PT)

TRD0652 Treadmill, Exercise (Rehab/PT)

TRM0003 Trimmer, Dental, Wet

UCL0008 Ultrasonic Cleaner, Countertop

UCL0081 Ultrasonic Cleaner, Countertop

UTH0053 Ultrasound, Therapeutic, Electrotherapy Combo

C-116340 Vacuum Extractor, Nail Dust

VAC0181 Vacuum, Forming Machine

C-114859 Valve, Air, Needle Control

C-104554 Volumeter, Hand, Set

WMR0061 Warmer, Gel

C-115122 Warmer, Spectacle, Plastic

WSR0124 Washer / Disinfector, Handpiece, Dental

WSR0216 Washer / Disinfector, Undercounter

WSH0158 Washer / Disinfector, Utensil

WST0121 Waste Can, 20-31 Gallon

WST0060 Waste Can, 32-40 Gallon

WST0060 Waste Can, 32-40 Gallon

WST0073 Waste Can, 44-55 Gallon

WST0073 Waste Can, 44-55 Gallon

WST0006 Waste Can, Bio-Hazardous

WST0018 Waste Can, Bio-Hazardous

WST0018 Waste Can, Bio-Hazardous

WST0018 Waste Can, Bio-Hazardous

WST0018 Waste Can, Bio-Hazardous

WST0036 Waste Can, Open Top

WST0212 Waste Can, Open Top

WST0212 Waste Can, Open Top

MEDICAL EQUIPMENT 11 70 00 - 18

C-132561 Waste Can, Open Top, Concourse

WST0139 Waste Can, Recycle

WST0083 Waste Can, Step-On

WST0083 Waste Can, Step-On

WST0083 Waste Can, Step-On

WST0083 Waste Can, Step-On

WST0083 Waste Can, Step-On

WST0058 Waste Can, Swing Top

ICE0157 Water Treatment System, Ice Maker, Wall Mount

ICE0157 Water Treatment System, Ice Maker, Wall Mount

C-277748 Water Treatment System, Pharmacy Dispensing

WTR0040 Water Treatment System, Washer/Disinfector/Sterilizer

C-115164 Wedges (Assortment)

C-115168 Weights, Cuff (Set)

WCR0100 Wheelchair, Adult, Bariatric

WCR0132 Wheelchair, Adult, Extra Large

D. Owner (IHS) Furnished –Vendor Installed Medical Equipment:

ANA0114 Analyzer, Lab, Chemistry

ANL0132 Analyzer, Ophthalmic, Corneal Topography (OCT)

ANL0003 Analyzer, Ophthalmic, Visual Field

CST0682 Cabinet, Storage, Clinical, Wall Mounted

CAM0158 Camera, Retinal, Non-mydriatic

C-114771 Chair Mount Adapter, Post & Arm

CHA0063 Chair, Clinical, Exam, Dental

C-130602 Chair/Table

CLP0005 Colposcope, General

CLP0009 Colposcope, Video System

C-114768 Computer w-Dual Monitors

SNN0002 Computer Workstation, Data Mgt, Pharmacy

CIS0152 Computer Workstation, Data Mgt, Pharmacy

CIS0154 Computer Workstation, Data Mgt, Pharmacy

C-278729 Computer Workstation, Data Mgt, Pharmacy

C-278730 Computer Workstation, Data Mgt, Pharmacy

C-114776 Console, Accessory w/Sink R/L

MEDICAL EQUIPMENT 11 70 00 - 19

C-114778 Console, Accessory, Upper, Wall Mtd

C-114778 Console, Accessory, Upper, Wall Mtd

DTL0002 Console, Dental, Central

DTL0005 Console, Dental, Doctors

C-114777 Console, Dispensing Unit, Upper

DEL0023 Delivery System, Dental, Console Mount

DST0014 Densitometer, Bone, Peripheral

DSK0002 Desk, Refraction w/ Console

DIG0011 Digitizer, X-ray Film

MED0172 Dispenser, Medication, Auxiliary

MED0050 Dispenser, Medication, Host (Main)

MED0060 Dispenser, Medication, Host (Main)

MED0109 Dispenser, Medication, Lock Module

MED0110 Dispenser, Medication, Lock Module

MED0149 Dispenser, Medication, Narcotics, Main

MED0673 Dispenser, Medication, Robotic

MED0153 Dispenser, Medication, Workstation

ECG0026 Electrocardiograph (ECG), Interpretive

KSK0006 Kiosk, Pharmacy Services

LDN0010 Light, Dental, Console/Cabinet Mount

MON0390 Monitor, Physiologic, Vital Signs

MTR0256 Monitor, Video, 21 - 24 Inch, Medical Grade

C-135782 Moveable Aisle System

PAC0006 PACS, Monitor, 2 Panel

C-115150 Pad, Signature w/Scanner

PMT0007 Perimeter, Ophthalmic

PRN0452 Printer, Label, Barcode

EPD0009 Signature Pad, Electronic

C-278702 Ticket Window

ULT0227 Ultrasound, Imaging, Multipurpose

XRD0091 X-Ray Unit, Dental, 3D

XRD0051 X-Ray Unit, Dental, Intraoral, Digital

XRY0202 X-Ray Unit, General Radiography

END OF SECTION 11 70 00