15_Asbestos_Analysis_1305M326Q0317_0002.pdf
PDF 352 KB Posted
- Solicitation number
- 1305M326Q0317
About this file
This is a Bulk Asbestos Fibers Analysis laboratory report from NVL Laboratories documenting testing results for samples collected from Hangar 33 at the PDO-AIT, JV facility in Seattle, Washington.
The report presents analysis of six bulk samples collected on 7/23/2026 and analyzed on 7/24/2026 using EPA Method 600/R-93/116 by Polarized Light Microscopy. Samples were taken from four stairwell locations (H33-Stairwell-1 through H33-Stairwell-4) and two southeast corner locations (H33-SECorner-01 and H33-SECorner-02). Each sample was examined for multiple layers of materials, with descriptions including woven fibrous materials, rubbery materials, asphaltic coatings, and metal wires. Non-fibrous materials identified include binders, fillers, fine particles, debris, and asphaltic particles, with cellulose consistently detected as the primary fibrous component ranging from 65-78%. All samples tested negative for asbestos across all layers and locations, with results reported as "None Detected ND." The analysis applied measurement uncertainties specified by EPA standards for asbestos percentage reporting. The report was marked as DRAFT with analysis performed by Hilary Crumley under client sampling procedures, with a one-day turnaround time and delivery to Mr. Jorge Godoy at the specified Seattle address.
View the file
Other files
Show all 14
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
< Client:
Address:
Attention: Mr. Jorge Godoy Hangar 33
PDO-AIT, JV
7600 Sand Point Way Seattle, WA 98115
Project Location:
Client Project #: H33 EP
Samples Received: 6 Samples Analyzed: 6
Batch #: 2612008.00
Date Received: 7/23/2026
Method: EPA/600/R-93/116
By Polarized Light Microscopy Bulk Asbestos Fibers Analysis
260067203 H33-Stairwell-1 Location: Hangar 33 Lab ID: Client Sample #:
Non-Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Layer 1 of 3 Description: Off-white woven fibrous material
Binder/Filler, Fine particles 77%Cellulose None Detected ND
Non-Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Layer 2 of 3 Description: Off-white woven layered fibrous material with black asphaltic coating
Binder/Filler, Fine particles, Asphaltic Particles 65%Cellulose None Detected ND
Non-Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Layer 3 of 3 Description: Metal copper wires
Wire NDNone Detected None Detected ND
260067204 H33-Stairwell-2 Location: Hangar 33 Lab ID: Client Sample #:
Non-Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Layer 1 of 2 Description: Brown/blue woven fibrous material with debris
Binder/Filler, Fine particles, Debris 75%Cellulose None Detected ND
Non-Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Layer 2 of 2 Description: Gray rubbery material over metal wire
Rubber/Binder, Wire NDNone Detected None Detected ND
260067205 H33-Stairwell-3 Location: Hangar 33 Lab ID: Client Sample #:
Non-Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Layer 1 of 2 Description: Blue woven fibrous material with debris
Binder/Filler, Fine particles, Debris 76%Cellulose None Detected ND
Note: If samples are not homogeneous, then subsamples of the components were analyzed separately. All bulk samples are analyzed using both EPA 600/R-93/116 and EPA 40 CFR Appendix E to Subpart E of Part 763 with the following measurement uncertainties for the reported % Asbestos (1%=0-3%, 5%=1-9%, 10%=5-15%, 20%=10-30%, 50%=40-60%). This report relates only to the items tested. If sample was not collected by NVL personnel, then the accuracy of the results is limited by the methodology and acuity of the sample collector. This report shall not be reproduced except in full, without written approval of NVL Laboratories, Inc. It shall not be used to claim product endorsement by NVLAP or any other agency of the US Government.
Client
Hilary CrumleyAnalyzed by: 07/24/2026 Date:
Sampled by: DRAFT
ASB-02 page 1 of 5
Attention: Mr. Jorge Godoy Hangar 33
PDO-AIT, JV
7600 Sand Point Way Seattle, WA 98115
Project Location:
Client Project #: H33 EP
Samples Received: 6 Samples Analyzed: 6
Batch #: 2612008.00
Date Received: 7/23/2026
Method: EPA/600/R-93/116
By Polarized Light Microscopy Bulk Asbestos Fibers Analysis
Non-Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Layer 2 of 2 Description: Gray rubbery material over metal wire
Rubber/Binder, Wire NDNone Detected None Detected ND
260067206 H33-Stairwell-4 Location: Hangar 33 Lab ID: Client Sample #:
Non-Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Layer 1 of 2 Description: Brown woven fibrous material with debris
Binder/Filler, Fine particles, Debris 78%Cellulose None Detected ND
Non-Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Layer 2 of 2 Description: Gray rubbery material over metal wire
Rubber/Binder, Wire NDNone Detected None Detected ND
260067207 H33-SECorner-01 Location: Hangar 33 Comments: Unsure of correct layer sequence.
Lab ID: Client Sample #:
Non-Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Layer 1 of 4 Description: Tan woven fibrous material with debris
Binder/Filler, Fine particles, Organic debris 78%Cellulose None Detected ND
Non-Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Layer 2 of 4 Description: Black rubbery material over metal wire
Rubber/Binder, Wire NDNone Detected None Detected ND
Non-Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Layer 3 of 4 Description: Black asphaltic fibrous woven material
Asphalt/Binder, Asphaltic Particles 67%Cellulose None Detected ND
Note: If samples are not homogeneous, then subsamples of the components were analyzed separately. All bulk samples are analyzed using both EPA 600/R-93/116 and EPA 40 CFR Appendix E to Subpart E of Part 763 with the following measurement uncertainties for the reported % Asbestos (1%=0-3%, 5%=1-9%, 10%=5-15%, 20%=10-30%, 50%=40-60%). This report relates only to the items tested. If sample was not collected by NVL personnel, then the accuracy of the results is limited by the methodology and acuity of the sample collector. This report shall not be reproduced except in full, without written approval of NVL Laboratories, Inc. It shall not be used to claim product endorsement by NVLAP or any other agency of the US Government.
Client
Hilary CrumleyAnalyzed by: 07/24/2026 Date:
ASB-02 page 2 of 5
Attention: Mr. Jorge Godoy Hangar 33
PDO-AIT, JV
7600 Sand Point Way Seattle, WA 98115
Project Location:
Client Project #: H33 EP
Samples Received: 6 Samples Analyzed: 6
Batch #: 2612008.00
Date Received: 7/23/2026
Method: EPA/600/R-93/116
By Polarized Light Microscopy Bulk Asbestos Fibers Analysis
Non-Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Layer 4 of 4 Description: Green crumbly rubbery material over wire
Binder/Filler, Fine particles, Wire NDNone Detected None Detected ND
260067208 H33-SECorner-02 Location: Hangar 33 Lab ID: Client Sample #:
Non-Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Layer 1 of 2 Description: Black asphaltic fibrous woven material
Asphalt/Binder, Asphaltic Particles 68%Cellulose None Detected ND
Non-Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Layer 2 of 2 Description: Gray rubbery material over wire
Rubber/Binder, Wire NDNone Detected None Detected ND
Note: If samples are not homogeneous, then subsamples of the components were analyzed separately. All bulk samples are analyzed using both EPA 600/R-93/116 and EPA 40 CFR Appendix E to Subpart E of Part 763 with the following measurement uncertainties for the reported % Asbestos (1%=0-3%, 5%=1-9%, 10%=5-15%, 20%=10-30%, 50%=40-60%). This report relates only to the items tested. If sample was not collected by NVL personnel, then the accuracy of the results is limited by the methodology and acuity of the sample collector. This report shall not be reproduced except in full, without written approval of NVL Laboratories, Inc. It shall not be used to claim product endorsement by NVLAP or any other agency of the US Government.
Client
Hilary CrumleyAnalyzed by: 07/24/2026 Date:
ASB-02 page 3 of 5
PDO-AIT, JV 2612008.00
Company NVL Batch Number
Total Number of Samples
Hangar 33
1 DayTAT
7/24/2026Due Date 2:20 PMTime
() -Fax jorge.godoy@noaa.govEmail
Project Manager Mr. Jorge Godoy
(206) 773-7076
(509) 406-6924Cell
Phone
Rush Samples
Rush TAT NoAH
H33 EPProject Name/Number: Project Location:
Sample ID Description A/RLab ID
ASBESTOS LABORATORY SERVICES
Subcategory Item Code
PLM Bulk
Metals ASB-02 EPA 600/R-93-116 Asbestos by PLM <bulk>
7600 Sand Point Way Seattle, WA 98115
Address
H33-Stairwell-11 A260067203 H33-Stairwell-22 A260067204 H33-Stairwell-33 A260067205 H33-Stairwell-44 A260067206 H33-SECorner-015 A260067207 H33-SECorner-026 A260067208
Office Use Only Print Name Company Date TimeSignature
Faxed Emailed
Company Date TimeSignature ClientSampled by
Kelly AuVuReceived by
ClientRelinquished by
Hilary CrumleyAnalyzed by Results Called by
NVL
NVL
7/23/26 7/24/26
Print Name
Entered By: Kelly AuVu
Date: 7/23/2026 Time: 10:54 AM
Special Instructions:
File details come from the government source that posted it. Updated .