Remanufacture of the F-16 Accessory Drive Gearbox (ADG) and Jet Fuel Starter (JFS)
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- FA825226R0073
- Agency
-
Air Force Sustainment Center
Air Force Materiel Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 488190 Other Support Activities for Air Transportation
- PSC
- 2835 Gas Turbines And Jet Engines; Non-Aircraft Prime Mover, Aircraft Non-Prime Mover, And Components
- Place of performance
- Hill AFB, Utah, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Air Force Materiel Command Air Force Sustainment Center seeks remanufacture of F-16 C/D Accessory Drive Gearbox (ADG) and Jet Fuel Starter (JFS) components to serviceable "A" condition, with proposals due July 10, 2026 at 4:00 PM Mountain Time. This is a multiple-award IDIQ with no set-aside, open to all responsible sources meeting qualification standards.
Place of performance is Hill Air Force Base, Utah (7981 Georgia St, Hill AFB, UT 84056). Sources must be qualified prior to award in accordance with FAR Part 9.202(a). Prospective contractors not previously approved must submit a Source Approval Request package and satisfy Repair Qualification Requirements documented in separate specifications for each item. The ADG qualification requires estimated costs of $6,934 and approximately 365 days; JFS qualification requires estimated costs of $4,500 and approximately 365 days. Sources may qualify under one of four Source Qualification Waiver Criteria if they demonstrate prior relevant overhaul experience within 48 months, equivalent qualifications for similar items, prior qualification with unchanged facilities and personnel, or OEM approval for production and testing. The contract allows continuous on-ramping of qualified sources throughout performance.
The IDIQ covers five years (base July 2026 through July 2031) plus one five-year option, with estimated minimum and maximum annual order quantities of 10–30 ADG units and 14–42 JFS units respectively. Total estimated ceiling across all awardees is $96,124,000. Pricing is firm fixed price, established at the delivery order level through Fair Opportunity Proposal Requests rather than locked at contract award. The government intends to award to all technically qualified vendors meeting responsibility standards and holding approved Supply Chain Risk Management plans. NAICS code is 488190 (Other Support Activities for Air Transportation); PSC code is 2835 (Gas Turbines and Jet Engines). Offerors must propose on 90 percent of FOPRs for NSNs they qualify to repair or face unsatisfactory CPARS ratings. Protests are limited to orders exceeding $35 million or those increasing contract scope, period, or maximum value. An ombudsman, Regina E. Marquardt-Chihuahua (801-777-5087, regina.marquardtchihuahua@us.af.mil), is available to resolve concerns after direct contractor-officer engagement fails.
Notice text
6 versions
Update #6 · Latest ·
Effective June 17, 2026:
Amending to add additional answers. Document titled Q&A Additional.
_______________________________________________________
Effective June 17, 2026:
Subject: ADG & JFSs Remanufacture MAC IDIQ Amendment 0003
Effective Date: June 17, 2026
Solicitation Number: FA825226R0073-0003
Closing Response Date: July 10, 2026 at 4:00pm mountain time.
Amendment 0003:
The purpose of this amendment is to:
1. Formally extend the proposal due date. The deadline for submission of proposals is hereby extended:
FROM: June 19, 2026, at 4:00 PM Mountain Time.
TO: July 10, 2026, at 4:00 PM Mountain Time.
2. Incorporate official responses to vendor inquiries submitted regarding the solicitation and its attachments.
3. Reinstate the ordering procedures and unlock the SPI All attachment/document.
4. Except as clarified or modified herein, all other terms, conditions, and specifications of the original solicitation and all prior amendments remain unchanged and in full force and effect.
5. Offerors must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation (or as amended) by one of the methods outlined in Block 11 of the SF-30. Failure to acknowledge this amendment may result in your proposal being rejected as non-responsive.
____________________________________
Effective June 11, 2026. The Statement of Work (SOW) has been updated to resolve a file accessibility issue reported by users on non-DoD networks. Please note that the proposal submission deadline remains unchanged; no extension is granted.
___________________________________________________
Subject: ADG & JFSs Remanufacture MAC IDIQ Amendment 0002
Effective Date: June 8, 2026
Solicitation Number: FA825226R0073-0002
Closing Response Date: June 19, 2026 at 4:00pm mountain time.
Amendment 0002: The purpose of this amendment is to formally extend the proposal due date.
1. The deadline for submission of proposals is hereby extended:
FROM: June 8, 2026 at 4:00pm MST
TO: June 19, 2026 at 4:00pm MST
2. Except as clarified or modified herein, all other terms, conditions, and specifications of the original solicitation and all prior amendments remain unchanged and in full force and effect.
3. Offerors must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation (or as amended) by one of the methods outlined in Block 11 of the SF-30. Failure to acknowledge this amendment may result in your proposal being rejected as non-responsive.
Amendment 0002 Updated Attachments:
1. Solicitation Amendment: FA8252-26-R-0073-0002
-------------------------------------------------------------------------------------
Subject: ADG & JFSs Remanufacture MAC IDIQ Amendment 0001
Effective Date: May 19, 2026
Solicitation Number: FA825226R0073-0001
Closing Response Date: June 8, 2026 at 4:00pm mountain time.
Amendment 0001: The purpose of this amendment is to incorporate the updated Ordering Guide and remove the Supply Chain Risk Management (SCRM) Plan submission and evaluation requirements from Sections L and M of the basic solicitation. Please note that the SCRM requirement is not being eliminated; rather, it is being shifted from the basic contract level to the task order level, as now detailed in the revised Ordering Guide (dated 19 May 2026).
This update is a procedural and formatting change that only shifts the SCRM Plan submission from the basic contract to delivery order proposal submission; it is not considered a material change. Accordingly, there will be no extension to the proposal due date.
Amendment 0001 Updated Attachments:
1. Solicitation Amendment: FA8252-26-R-0073-0001
2. Revised Ordering Procedures - Dated 19 May 2026
3. FA8252-26-R-0073 Solicitation Change Highlights
4. Ordering Procedures Change Highlights - Updated 19 May
-------------------------------------------------------------------------------------
IDIQ Yearly Minimum/Maximum Order:
Min/Max: ADG 10/30
Min/Max: JFS 14/42
Action: Solicitation
Purpose: This is a solicitation/Request for Proposal (RFP) or an Invitation For Bid (IFB).
All responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency.
Multiple Award Contract (MAC) - Indefinite Delivery, Indefinite Quantity (IDIQ) – Contract Period - Five (5) year contract with one (1) five (5) year option, for a potential total contract length of 10 years Items:
• Remanufacture - Accessory Drive Gearbox (ADG) -NSN:2835012080169RP
• Remanufacture - Jet Fuel Starters (JFS) – NSNs:2835013083769RP, 2835016892101RP
The Accessory Drive Gearbox and Jet Fuel Starter are utilized in the Secondary Power System of the F-16 C/D Aircraft. The JFS is a back to back centrifugal compressor-turbine engine which provides shaft horsepower directly to the ADG. The ADG itself acts as an interface between the JFS and the Power Take-Off (PTO) shaft.
Year: 2026
Product Code: 2835 - Supply
Subject: ADG & JFSs Remanufacture MAC IDIQ
Solicitation Number: FA825226R0073
Closing Response Date: June 8, 2026 at 4:00pm mountain time.
Restricted to Qualified Sources: See FAR Part 52.209-1 The requirements of FAR 9.202(a) apply. Sources must be qualified prior to being considered for award. Interested vendors that have not been previously approved for this acquisition must submit a Source Approval Request (SAR) package to the Source Development Small Business Office or the Contracting Officer. As prescribed in FAR 9.202(e), the contracting officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards (see attached RQR). Contract will allow for on-ramping of qualified sources.
Foreign Participation: Restricted
Update #5 ·
Effective June 17, 2026:
Subject: ADG & JFSs Remanufacture MAC IDIQ Amendment 0003
Effective Date: June 17, 2026
Solicitation Number: FA825226R0073-0003
Closing Response Date: July 10, 2026 at 4:00pm mountain time.
Amendment 0003:
The purpose of this amendment is to:
1. Formally extend the proposal due date. The deadline for submission of proposals is hereby extended:
FROM: June 19, 2026, at 4:00 PM Mountain Time.
TO: July 10, 2026, at 4:00 PM Mountain Time.
2. Incorporate official responses to vendor inquiries submitted regarding the solicitation and its attachments.
3. Reinstate the ordering procedures and unlock the SPI All attachment/document.
4. Except as clarified or modified herein, all other terms, conditions, and specifications of the original solicitation and all prior amendments remain unchanged and in full force and effect.
5. Offerors must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation (or as amended) by one of the methods outlined in Block 11 of the SF-30. Failure to acknowledge this amendment may result in your proposal being rejected as non-responsive.
____________________________________
Effective June 11, 2026. The Statement of Work (SOW) has been updated to resolve a file accessibility issue reported by users on non-DoD networks. Please note that the proposal submission deadline remains unchanged; no extension is granted.
___________________________________________________
Subject: ADG & JFSs Remanufacture MAC IDIQ Amendment 0002
Effective Date: June 8, 2026
Solicitation Number: FA825226R0073-0002
Closing Response Date: June 19, 2026 at 4:00pm mountain time.
Amendment 0002: The purpose of this amendment is to formally extend the proposal due date.
1. The deadline for submission of proposals is hereby extended:
FROM: June 8, 2026 at 4:00pm MST
TO: June 19, 2026 at 4:00pm MST
2. Except as clarified or modified herein, all other terms, conditions, and specifications of the original solicitation and all prior amendments remain unchanged and in full force and effect.
3. Offerors must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation (or as amended) by one of the methods outlined in Block 11 of the SF-30. Failure to acknowledge this amendment may result in your proposal being rejected as non-responsive.
Amendment 0002 Updated Attachments:
1. Solicitation Amendment: FA8252-26-R-0073-0002
-------------------------------------------------------------------------------------
Subject: ADG & JFSs Remanufacture MAC IDIQ Amendment 0001
Effective Date: May 19, 2026
Solicitation Number: FA825226R0073-0001
Closing Response Date: June 8, 2026 at 4:00pm mountain time.
Amendment 0001: The purpose of this amendment is to incorporate the updated Ordering Guide and remove the Supply Chain Risk Management (SCRM) Plan submission and evaluation requirements from Sections L and M of the basic solicitation. Please note that the SCRM requirement is not being eliminated; rather, it is being shifted from the basic contract level to the task order level, as now detailed in the revised Ordering Guide (dated 19 May 2026).
This update is a procedural and formatting change that only shifts the SCRM Plan submission from the basic contract to delivery order proposal submission; it is not considered a material change. Accordingly, there will be no extension to the proposal due date.
Amendment 0001 Updated Attachments:
1. Solicitation Amendment: FA8252-26-R-0073-0001
2. Revised Ordering Procedures - Dated 19 May 2026
3. FA8252-26-R-0073 Solicitation Change Highlights
4. Ordering Procedures Change Highlights - Updated 19 May
-------------------------------------------------------------------------------------
IDIQ Yearly Minimum/Maximum Order:
Min/Max: ADG 10/30
Min/Max: JFS 14/42
Action: Solicitation
Purpose: This is a solicitation/Request for Proposal (RFP) or an Invitation For Bid (IFB).
All responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency.
Multiple Award Contract (MAC) - Indefinite Delivery, Indefinite Quantity (IDIQ) – Contract Period - Five (5) year contract with one (1) five (5) year option, for a potential total contract length of 10 years Items:
• Remanufacture - Accessory Drive Gearbox (ADG) -NSN:2835012080169RP
• Remanufacture - Jet Fuel Starters (JFS) – NSNs:2835013083769RP, 2835016892101RP
The Accessory Drive Gearbox and Jet Fuel Starter are utilized in the Secondary Power System of the F-16 C/D Aircraft. The JFS is a back to back centrifugal compressor-turbine engine which provides shaft horsepower directly to the ADG. The ADG itself acts as an interface between the JFS and the Power Take-Off (PTO) shaft.
Year: 2026
Product Code: 2835 - Supply
Subject: ADG & JFSs Remanufacture MAC IDIQ
Solicitation Number: FA825226R0073
Closing Response Date: June 8, 2026 at 4:00pm mountain time.
Restricted to Qualified Sources: See FAR Part 52.209-1 The requirements of FAR 9.202(a) apply. Sources must be qualified prior to being considered for award. Interested vendors that have not been previously approved for this acquisition must submit a Source Approval Request (SAR) package to the Source Development Small Business Office or the Contracting Officer. As prescribed in FAR 9.202(e), the contracting officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards (see attached RQR). Contract will allow for on-ramping of qualified sources.
Foreign Participation: Restricted
Update #4 ·
Effective June 11, 2026. The Statement of Work (SOW) has been updated to resolve a file accessibility issue reported by users on non-DoD networks. Please note that the proposal submission deadline remains unchanged; no extension is granted.
___________________________________________________
Subject: ADG & JFSs Remanufacture MAC IDIQ Amendment 0002
Effective Date: June 8, 2026
Solicitation Number: FA825226R0073-0002
Closing Response Date: June 19, 2026 at 4:00pm mountain time.
Amendment 0002: The purpose of this amendment is to formally extend the proposal due date.
1. The deadline for submission of proposals is hereby extended:
FROM: June 8, 2026 at 4:00pm MST
TO: June 19, 2026 at 4:00pm MST
2. Except as clarified or modified herein, all other terms, conditions, and specifications of the original solicitation and all prior amendments remain unchanged and in full force and effect.
3. Offerors must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation (or as amended) by one of the methods outlined in Block 11 of the SF-30. Failure to acknowledge this amendment may result in your proposal being rejected as non-responsive.
Amendment 0002 Updated Attachments:
1. Solicitation Amendment: FA8252-26-R-0073-0002
-------------------------------------------------------------------------------------
Subject: ADG & JFSs Remanufacture MAC IDIQ Amendment 0001
Effective Date: May 19, 2026
Solicitation Number: FA825226R0073-0001
Closing Response Date: June 8, 2026 at 4:00pm mountain time.
Amendment 0001: The purpose of this amendment is to incorporate the updated Ordering Guide and remove the Supply Chain Risk Management (SCRM) Plan submission and evaluation requirements from Sections L and M of the basic solicitation. Please note that the SCRM requirement is not being eliminated; rather, it is being shifted from the basic contract level to the task order level, as now detailed in the revised Ordering Guide (dated 19 May 2026).
This update is a procedural and formatting change that only shifts the SCRM Plan submission from the basic contract to delivery order proposal submission; it is not considered a material change. Accordingly, there will be no extension to the proposal due date.
Amendment 0001 Updated Attachments:
1. Solicitation Amendment: FA8252-26-R-0073-0001
2. Revised Ordering Procedures - Dated 19 May 2026
3. FA8252-26-R-0073 Solicitation Change Highlights
4. Ordering Procedures Change Highlights - Updated 19 May
-------------------------------------------------------------------------------------
IDIQ Yearly Minimum/Maximum Order:
Min/Max: ADG 10/30
Min/Max: JFS 14/42
Action: Solicitation
Purpose: This is a solicitation/Request for Proposal (RFP) or an Invitation For Bid (IFB).
All responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency.
Multiple Award Contract (MAC) - Indefinite Delivery, Indefinite Quantity (IDIQ) – Contract Period - Five (5) year contract with one (1) five (5) year option, for a potential total contract length of 10 years Items:
• Remanufacture - Accessory Drive Gearbox (ADG) -NSN:2835012080169RP
• Remanufacture - Jet Fuel Starters (JFS) – NSNs:2835013083769RP, 2835016892101RP
The Accessory Drive Gearbox and Jet Fuel Starter are utilized in the Secondary Power System of the F-16 C/D Aircraft. The JFS is a back to back centrifugal compressor-turbine engine which provides shaft horsepower directly to the ADG. The ADG itself acts as an interface between the JFS and the Power Take-Off (PTO) shaft.
Year: 2026
Product Code: 2835 - Supply
Subject: ADG & JFSs Remanufacture MAC IDIQ
Solicitation Number: FA825226R0073
Closing Response Date: June 8, 2026 at 4:00pm mountain time.
Restricted to Qualified Sources: See FAR Part 52.209-1 The requirements of FAR 9.202(a) apply. Sources must be qualified prior to being considered for award. Interested vendors that have not been previously approved for this acquisition must submit a Source Approval Request (SAR) package to the Source Development Small Business Office or the Contracting Officer. As prescribed in FAR 9.202(e), the contracting officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards (see attached RQR). Contract will allow for on-ramping of qualified sources.
Foreign Participation: Restricted
Update #3 ·
Subject: ADG & JFSs Remanufacture MAC IDIQ Amendment 0002
Effective Date: June 8, 2026
Solicitation Number: FA825226R0073-0002
Closing Response Date: June 19, 2026 at 4:00pm mountain time.
Amendment 0002: The purpose of this amendment is to formally extend the proposal due date.
1. The deadline for submission of proposals is hereby extended:
FROM: June 8, 2026 at 4:00pm MST
TO: June 19, 2026 at 4:00pm MST
2. Except as clarified or modified herein, all other terms, conditions, and specifications of the original solicitation and all prior amendments remain unchanged and in full force and effect.
3. Offerors must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation (or as amended) by one of the methods outlined in Block 11 of the SF-30. Failure to acknowledge this amendment may result in your proposal being rejected as non-responsive.
Amendment 0002 Updated Attachments:
1. Solicitation Amendment: FA8252-26-R-0073-0002
-------------------------------------------------------------------------------------
Subject: ADG & JFSs Remanufacture MAC IDIQ Amendment 0001
Effective Date: May 19, 2026
Solicitation Number: FA825226R0073-0001
Closing Response Date: June 8, 2026 at 4:00pm mountain time.
Amendment 0001: The purpose of this amendment is to incorporate the updated Ordering Guide and remove the Supply Chain Risk Management (SCRM) Plan submission and evaluation requirements from Sections L and M of the basic solicitation. Please note that the SCRM requirement is not being eliminated; rather, it is being shifted from the basic contract level to the task order level, as now detailed in the revised Ordering Guide (dated 19 May 2026).
This update is a procedural and formatting change that only shifts the SCRM Plan submission from the basic contract to delivery order proposal submission; it is not considered a material change. Accordingly, there will be no extension to the proposal due date.
Amendment 0001 Updated Attachments:
1. Solicitation Amendment: FA8252-26-R-0073-0001
2. Revised Ordering Procedures - Dated 19 May 2026
3. FA8252-26-R-0073 Solicitation Change Highlights
4. Ordering Procedures Change Highlights - Updated 19 May
-------------------------------------------------------------------------------------
IDIQ Yearly Minimum/Maximum Order:
Min/Max: ADG 10/30
Min/Max: JFS 14/42
Action: Solicitation
Purpose: This is a solicitation/Request for Proposal (RFP) or an Invitation For Bid (IFB).
All responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency.
Multiple Award Contract (MAC) - Indefinite Delivery, Indefinite Quantity (IDIQ) – Contract Period - Five (5) year contract with one (1) five (5) year option, for a potential total contract length of 10 years Items:
• Remanufacture - Accessory Drive Gearbox (ADG) -NSN:2835012080169RP
• Remanufacture - Jet Fuel Starters (JFS) – NSNs:2835013083769RP, 2835016892101RP
The Accessory Drive Gearbox and Jet Fuel Starter are utilized in the Secondary Power System of the F-16 C/D Aircraft. The JFS is a back to back centrifugal compressor-turbine engine which provides shaft horsepower directly to the ADG. The ADG itself acts as an interface between the JFS and the Power Take-Off (PTO) shaft.
Year: 2026
Product Code: 2835 - Supply
Subject: ADG & JFSs Remanufacture MAC IDIQ
Solicitation Number: FA825226R0073
Closing Response Date: June 8, 2026 at 4:00pm mountain time.
Restricted to Qualified Sources: See FAR Part 52.209-1 The requirements of FAR 9.202(a) apply. Sources must be qualified prior to being considered for award. Interested vendors that have not been previously approved for this acquisition must submit a Source Approval Request (SAR) package to the Source Development Small Business Office or the Contracting Officer. As prescribed in FAR 9.202(e), the contracting officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards (see attached RQR). Contract will allow for on-ramping of qualified sources.
Foreign Participation: Restricted
Update #2 ·
Subject: ADG & JFSs Remanufacture MAC IDIQ Amendment 0001
Effective Date: May 19, 2026
Solicitation Number: FA825226R0073-0001
Closing Response Date: June 8, 2026 at 4:00pm mountain time.
Amendment 0001: The purpose of this amendment is to incorporate the updated Ordering Guide and remove the Supply Chain Risk Management (SCRM) Plan submission and evaluation requirements from Sections L and M of the basic solicitation. Please note that the SCRM requirement is not being eliminated; rather, it is being shifted from the basic contract level to the task order level, as now detailed in the revised Ordering Guide (dated 19 May 2026).
This update is a procedural and formatting change that only shifts the SCRM Plan submission from the basic contract to delivery order proposal submission; it is not considered a material change. Accordingly, there will be no extension to the proposal due date.
Amendment 0001 Updated Attachments:
1. Solicitation Amendment: FA8252-26-R-0073-0001
2. Revised Ordering Procedures - Dated 19 May 2026
3. FA8252-26-R-0073 Solicitation Change Highlights
4. Ordering Procedures Change Highlights - Updated 19 May
-------------------------------------------------------------------------------------
IDIQ Yearly Minimum/Maximum Order:
Min/Max: ADG 10/30
Min/Max: JFS 14/42
Action: Solicitation
Purpose: This is a solicitation/Request for Proposal (RFP) or an Invitation For Bid (IFB).
All responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency.
Multiple Award Contract (MAC) - Indefinite Delivery, Indefinite Quantity (IDIQ) – Contract Period - Five (5) year contract with one (1) five (5) year option, for a potential total contract length of 10 years Items:
• Remanufacture - Accessory Drive Gearbox (ADG) -NSN:2835012080169RP
• Remanufacture - Jet Fuel Starters (JFS) – NSNs:2835013083769RP, 2835016892101RP
The Accessory Drive Gearbox and Jet Fuel Starter are utilized in the Secondary Power System of the F-16 C/D Aircraft. The JFS is a back to back centrifugal compressor-turbine engine which provides shaft horsepower directly to the ADG. The ADG itself acts as an interface between the JFS and the Power Take-Off (PTO) shaft.
Year: 2026
Product Code: 2835 - Supply
Subject: ADG & JFSs Remanufacture MAC IDIQ
Solicitation Number: FA825226R0073
Closing Response Date: June 8, 2026 at 4:00pm mountain time.
Restricted to Qualified Sources: See FAR Part 52.209-1 The requirements of FAR 9.202(a) apply. Sources must be qualified prior to being considered for award. Interested vendors that have not been previously approved for this acquisition must submit a Source Approval Request (SAR) package to the Source Development Small Business Office or the Contracting Officer. As prescribed in FAR 9.202(e), the contracting officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards (see attached RQR). Contract will allow for on-ramping of qualified sources.
Foreign Participation: Restricted
Update #1 ·
IDIQ Yearly Minimum/Maximum Order:
Min/Max: ADG 10/30
Min/Max: JFS 14/42
Action: Solicitation
Purpose: This is a solicitation/Request for Proposal (RFP) or an Invitation For Bid (IFB).
All responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency.
Multiple Award Contract (MAC) - Indefinite Delivery, Indefinite Quantity (IDIQ) – Contract Period - Five (5) year contract with one (1) five (5) year option, for a potential total contract length of 10 years Items:
• Remanufacture - Accessory Drive Gearbox (ADG) -NSN:2835012080169RP
• Remanufacture - Jet Fuel Starters (JFS) – NSNs:2835013083769RP, 2835016892101RP
The Accessory Drive Gearbox and Jet Fuel Starter are utilized in the Secondary Power System of the F-16 C/D Aircraft. The JFS is a back to back centrifugal compressor-turbine engine which provides shaft horsepower directly to the ADG. The ADG itself acts as an interface between the JFS and the Power Take-Off (PTO) shaft.
Year: 2026
Product Code: 2835 - Supply
Subject: ADG & JFSs Remanufacture MAC IDIQ
Solicitation Number: FA825226R0073
Closing Response Date: June 8, 2026 at 4:00pm mountain time.
Restricted to Qualified Sources: See FAR Part 52.209-1 The requirements of FAR 9.202(a) apply. Sources must be qualified prior to being considered for award. Interested vendors that have not been previously approved for this acquisition must submit a Source Approval Request (SAR) package to the Source Development Small Business Office or the Contracting Officer. As prescribed in FAR 9.202(e), the contracting officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards (see attached RQR). Contract will allow for on-ramping of qualified sources.
Foreign Participation: Restricted
Files
Show all 30
Notice history
| Notice | Type | Posted |
|---|---|---|
| Remanufacture of the F-16 Accessory Drive Gearbox (ADG) and Jet Fuel Starter (JFS) | Award Notice | |
| This notice | Solicitation | |
| Remanufacture of the F-16 Accessory Drive Gearbox (ADG) and Jet Fuel Starter (JFS) | Pre-Solicitation | |
| Remanufacture of the F-16 Accessory Drive Gearbox (ADG) and Jet Fuel Starter (JFS) | Special Notice | |
| Remanufacture of the F-16 Accessory Drive Gearbox (ADG) and Jet Fuel Starter (JFS) | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| T-38 Accessory Drive Gearbox Remanufacture | Air Force Sustainment Center | No set-aside | |
| Gearbox | Aviation | No set-aside | |
| GearboxAssy_End_Item_F100_NSN_2840015493031NZ_PN_4087025-801 | Aviation | No set-aside | |
| FOPR for F-16 AAGs for the Common Aircraft Portable Reprogrammable Equipment (CAPRE) Secure Memory Loader Verifier (SMLV) | AFLCMC Robins AFB | No set-aside | |
| F-16 Air Bearing Turbing Scroll Housing | Air Force Sustainment Center | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity