1. FA8252-26-R-0073-0001.pdf
PDF 2 MB Posted
- Solicitation number
- FA825226R0073
About this file
This is a Standard Form 30 Amendment to a Multiple Award Indefinite Delivery/Indefinite Quantity (IDIQ) contract solicitation for the remanufacture of F-16 aircraft components. Amendment 0001, effective May 19, 2026, removes Supply Chain Risk Management (SCRM) Plan submission and evaluation requirements from the basic contract level and shifts them to the task order level, as detailed in the revised Ordering Guide. This is a procedural formatting change with no material impact on the proposal due date of June 8, 2026 at 4:00 PM Mountain Time. The contract is issued by the Department of the Air Force, Directorate of Contracting at Hill Air Force Base, Utah, with a total estimated ceiling of $96,124,000 for the entire IDIQ contract.
The solicitation requires remanufacture of two F-16 components: the Accessory Drive Gearbox (ADG, NSN 2835-01-208-0169) and Jet Fuel Starter (JFS, NSNs 2835-01-689-2101 and 2835-01-308-3769), which are utilized in the Secondary Power System of F-16 C/D aircraft. The contract includes a five-year base period (July 2026 through July 2031) and one five-year option period (July 2031 through July 2036), with estimated minimum annual quantities of 10 ADGs and 14 JFS units, and maximum annual quantities of 30 ADGs and 42 JFS units. Qualified contractors must meet one of three minimum order guarantee paths: qualification on both items with an initial order of three ADGs; qualification on a single item with an initial order of three units; or first article requirements with an initial order of one first article unit. Contractors must be qualified prior to award, comply with ISO 9001-2015 standards, maintain CMMC Level 1 cybersecurity certification, and include DD1348-1 documentation with all returned assets. All awardees will receive fair opportunity consideration for each task order in accordance with FAR 16.507.
View the file
Other files
Show all 29
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.
Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:
(a) By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;
or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE
RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.
12. ACCOUNTING AND APPROPRIATION DATA (If required)
13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.
IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.
CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER
NUMBER IN ITEM 10A.
B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).
C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:
D. OTHER (Specify type of modification and authority)
E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.
14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)
Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.
15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)
15B. CONTRACTOR/OFFEROR
(Signature of person authorized to sign)
15C. DATE SIGNED 16B. UNITED STATES OF AMERICA
(Signature of Contracting Officer)
16C. DATE SIGNED
Previous edition unusable STANDARD FORM 30 (REV. 11/2016) Prescribed by GSA FAR (48 CFR) 53.243
AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT
2. AMENDMENT/MODIFICATION NUMBER
PAGE OF PAGES
5. PROJECT NUMBER (If applicable)
6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE
8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) 9A. AMENDMENT OF SOLICITATION NUMBER
9B. DATED (SEE ITEM 11)
10A. MODIFICATION OF CONTRACT/ORDER NUMBER
10B. DATED (SEE ITEM 13)
CODE
11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS
FACILITY CODE
(X)
4. REQUISITION/PURCHASE REQUISITION NUMBER3. EFFECTIVE DATE
1. CONTRACT ID CODE
FA8252-26-R-0073-0001
DEPARTMENT OF THE AIR FORCE, DIRECTORATE OF CONTRACTING
AFSC PZACB
6050 GUM LANE BLDG 1215
HILL AIR FORCE BASE UT 84056-5825
BUYER: Sara C Tibbetts/PZAC sara.tibbetts@us.af.mil Phone: (801) 775- 6967 Fax: (000) 000-0000 No Collect Calls
FA8252
19 MAY 2026 FD20202600073 01
JS
X
FA825226R0073
19-MAY-2026
X X
X 1
FMS REQUIREMENT
ROUTINE FAST PAY PROCEDURES APPLY
FA8252-26-R-0073-0001
Continuation of block 14. DESCRIPTION OF AMENDMENT/MODIFICATION
PART I - THE SCHEDULE
SECTION B
SUPPLIES OR SERVICES AND PRICES/COSTS
In accordance with the attached CAV AF Reporting Requirements (see the document listed in Section J), the Contractor shall include a DD1348-1 when assets are shipped. DCMA Quality Assurance Representatives (QARs) will not approve or sign the DD1348-1, but will ensure a DD1348-1 is included with each returned asset. If a DD1348-1 is not included with each returned asset, DCMA will not sign the receiving report (DD250).
MULTIPLE AWARD INDEFINITE DELIVERY/INDEFINITE QUANTITY (IDIQ) TYPE
CONTRACT
REMANUFACTURE OF THE F-16 ACCESSORY DRIVE GEARBOX (ADG)
AND
JET FUEL STARTER (JFS) PARTS
General This is a multiple-award Indefinite Delivery/Indefinite Quantity (IDIQ) contract. The Government is not obligated to place any orders with a specific awardee, only to meet the total minimum order quantity for the contract among all awardees. All awardees will be provided a fair opportunity to be considered for each task order in accordance with Revolutionary Far Overhaul
(RFO) 16.507.
Minimum Order Guarantee Qualified contractors must include one of the following paths in their proposal to meet the minimum order guarantee:
General Precedence Rule: If a contractor is qualified on both the ADG and the JFS, the initial ordering procedures for the ADG shall take precedence over the JFS.
1. Qualified on Both (No First Article 'Bid B'):
If the contractor is qualified on both the ADG and JFS, and is not subject to First Article requirements, the initial order will be for three (3) ADGs.
2. Qualified on a Single Item (No First Article 'Bid B'):
If the contractor is exclusively qualified for either the ADG or the JFS, and is not subject to First Article requirements, the initial order will be for three (3) units of whichever item the vendor is qualified to produce.
3. First Article ('Bid A') Required:
If the contractor is subject to First Article requirements, the initial delivery order to fund the basic IDIQ will be for one (1) First Article Unit of the ADG. An initial order for one (1) First Article Unit of the JFS will only be placed if the contractor is exclusively qualified for the JFS.
NOTE: CLIN 0001, First Article Unit-ADG, CLIN 0002, First Article Test Report - ADG, CLIN 0009, First Article Unit - JFS and CLIN 0010, First Article Test Report-JFS will be utilized as applicable throughout any year of the overall contract in which a contractor is subject to FA on their initial order. See clause 52.209-3 below for reference.
Contract Minimum/Maximum Quantities and Ceiling The estimated minimum and maximum quantities shown below apply to the IDIQ contract as a whole and not to individual awardees. The total estimated ceiling for all orders under this IDIQ contract is $96,124,000.
Item Description Minimum Annual Quantity Maximum Annual Quantity Accessory Drive Gearbox 10 30 Jet Fuel Starter 14 42
Period of Performance The Period of Performance consists of one five-year base period and one five-year option period, as detailed below.
Base Period (5 Years) Period Start Date End Date Year 1 JUL 2026 JUL 2027 Year 2 JUL 2027 JUL 2028 Year 3 JUL 2028 JUL 2029 Year 4 JUL 2029 JUL 2030 Year 5 JUL 2030 JUL 2031
Option Period 1 (5 Years) Period Start Date End Date Year 1 JUL 2031 JUL 2032 Year 2 JUL 2032 JUL 2033 Year 3 JUL 2033 JUL 2034 Year 4 JUL 2034 JUL 2035 Year 5 JUL 2035 JUL 2036
Critical Guidance for Offerors Potential offerors are strongly advised to thoroughly review all sections of this solicitation.
Particular attention should be paid to the following:
-Section L: Instructions, Conditions, and Notices to Offerors
-Section M: Evaluation Factors for Award -Ordering Guidance -Failure Factor Guidance
Please be advised that the Depot Failure Factor Report will be provided to offerors during the proposal process. This report outlines common failures for the Accessory Drive Gearbox (ADG) and Jet Fuel Starter (JFS) as identified by the Ogden Depot. This document is provided for reference only. It is critical to note that items listed in this report will not be eligible for separate reimbursement under the 'Over & Above CLIN'. All costs associated with these potential failures must be incorporated into the contractor's proposal for the remanufacture of both the ADG and
JFS.
Notice to Offeror(s)/Supplier(s): Funds are not presently available for this effort. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs.
Funds will only be made available once all qualified candidates for award are identified.
Accessory Drive Gearbox (ADG) - First Article
Bid A - First Article Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
1 EA
CLIN ACRN ACRN Total
0001 AA
NSN: 2835-01-208-0169 RP
ADG First Article
Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2008
Applicability: None ;
IUID Required: Yes Physical Item Markings:
Serial Number Required Type / Ship To PACRN Mark For
A PLANT PAW
Type / Ship To Quantity (U/I) To be determined _ Req No / Pri
Required Delivery
A PLANT 1 EA TBD
Proposed Delivery
A PLANT 1 EA
TAC: F3RS
ADG First Article Test Report Data
Bid A - First Article Required Item No.
Not Separately Priced Quantity U/I Unit Price
1 EA NSP
CLIN ACRN ACRN Total
0002 AA
ADG First Article Test Report Data, CDRL B001 Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: IAW DD1423 - CDRL Type / Ship To Quantity (U/I) *ARO IAW CDRL B001 _ Req No / Pri
Required Delivery
+ IAW1423 1 EA
Proposed Delivery
+ IAW1423 1 EA
ADG Overhaul - YEAR 1
Bid B - First Article NOT Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
0003 AA
NSN: 2835-01-208-0169 RP
ADG Overhaul (Bid B) - YEAR 1
ADG Overhaul - YEAR 1
Bid B - First Article NOT Required Manufacturer Part Number 3Y015 5007076B
9009H 2835PL0664313
99167 5007076B Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2015
Applicability: None ;
IUID Required: Yes Physical Item Markings:
Serial Number Required
Transportation From Continental United States CONUS (CONUS) Sources
TYPE / SHIP TO CODE F.O.B.
A SW3210 ORIGIN
Type / Ship To PACRN Mark For
A SW3210 PAV
Type / Ship To Quantity (U/I) *ARO After Receipt of
Carcass Req No / Pri
Required Delivery
A SW3210 EA *1 Months
Proposed Delivery
A SW3210 EA
TAC: F3RS
ADG Over and Above
Bid B - First Article NOT Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
0004 AA
Over and Above
IAW STATEMENT OF WORK
ADG OVER AND ABOVE
Priority: R
ADG Over and Above
Bid B - First Article NOT Required
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2015
ADG Commonly Missing Parts (Price List)
Bid B - First Article NOT Required Item No.
Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
0005 AA
Data
IAW STATEMENT OF WORK
ADG - COMMONLY MISSING PARTS (BASED ON CONTRACTOR PRICE LIST)
Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2015
ADG Required Modifications (Price List)
Bid B - First Article NOT Required Item No.
Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
0006 AA
IAW STATEMENT OF WORK
ADG- REQUIRED MODIFICATIONS (BASED ON CONTRACTOR PRICE LIST)
Limitations of Liability: Other Than High Value Item
ADG Required Modifications (Price List)
Bid B - First Article NOT Required
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2015
ADG Beyond Economical remanufacture Evaluation (BER)
Bid B - First Article NOT Required Item No.
Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
0007 AA
IAW STATEMENT OF WORK
ADG Beyond Economical Remanufacture Evaluation (BER) Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2015
Applicability: None ;
ADG No-Fault Evaluation
Bid B - First Article NOT Required Item No.
Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
0008 AA
Data
IAW STATEMENT OF WORK
ADG - No Fault Evaluation
ADG No-Fault Evaluation
Bid B - First Article NOT Required
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2015
Jet Fuel Starter (JFS) First Article
Bid A - First Article Required Item No.
Quantity U/I Unit Price Amount
1 EA
CLIN ACRN ACRN Total
0009 AA
NSN: 2835-01-689-2101 RP
JFS FIRST ARTICLE
Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2008
Applicability: None ;
Buy American Act/Balance of Payments Program Type / Ship To PACRN Mark For
A PLANT PAW
Type / Ship To Quantity (U/I) To be determined _ Req No / Pri
Required Delivery
A PLANT 1 EA TBD
Proposed Delivery
A PLANT 1 EA
TAC: F3RS
JFS First Article Test Report Data
Bid A - First Article Required Item No.
Not Separately Priced Quantity U/I Unit Price
1 LO NSP
CLIN ACRN ACRN Total
0010 AA
JFS TEST REPORT, CDRL B001
JFS First Article Test Report Data Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: IAW DD1423 - CDRL Type / Ship To Quantity (U/I) *ARO *ARO IAW
CDRL B001
_ Req No / Pri
Required Delivery
+ IAW1423 1 LO TBD
Proposed Delivery
+ IAW1423 1 LO
JFS Overhaul - YEAR 1
Bid B - First Article NOT Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
0011 AA
NSN: 2835-01-689-2101 RP
JFS - YEAR 1
ENGINE,GAS TURBINE,
Manufacturer Part Number 55820 4550164
JFS Overhaul - YEAR 1
Bid B - First Article NOT Required
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2015
Applicability: None ;
IUID Required: Yes Physical Item Markings:
Serial Number Required
Transportation From Continental United States CONUS (CONUS) Sources
TYPE / SHIP TO CODE F.O.B.
A SW3210 ORIGIN
Type / Ship To PACRN Mark For
A SW3210 PAG
Type / Ship To Quantity (U/I) *ARO After Receipt of
Carcass Req No / Pri
Required Delivery
A SW3210 EA *1 Months
Proposed Delivery
A SW3210 EA
TAC: F3RS
JFS Overhaul (Legacy) - YEAR 1
Bid B - First Article NOT Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
0012 AA
NSN: 2835-01-308-3769 RP
JFS (LEGACY) - YEAR 1
ENGINE,GAS TURBINE,
Manufacturer Part Number 55820 160001-1100A 55820 160001-1100B 55820 160001-401/1101 55820 160001-924-03 55820 4504554
9009H 2835PL1614475
9009H 2835PL1614504
JFS Overhaul (Legacy) - YEAR 1
Bid B - First Article NOT Required
9009H 2835PL1615448
99167 5914011 Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2015
Applicability: None ;
IUID Required: Yes Physical Item Markings:
Serial Number Required
Transportation From Continental United States CONUS (CONUS) Sources
TYPE / SHIP TO CODE F.O.B.
A SW3210 ORIGIN
Type / Ship To PACRN Mark For
A SW3210 PAA
Type / Ship To Quantity (U/I) *ARO After Receipt of
Carcass Req No / Pri
Required Delivery
A SW3210 EA *1 Months
Proposed Delivery
A SW3210 EA
TAC: F3RS
JFS Over and Above
Bid B - First Article NOT Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
0013 AA
IAW STATEMENT OF WORK
JFS OVER AND ABOVE
JFS Over and Above
Bid B - First Article NOT Required
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2015
JFS Commonly Missing Parts (Price List)
Bid B - First Article NOT Required Item No.
Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
0014 AA
IAW STATEMENT OF WORK
JFS- CCOMMONLY MISSING PARTS (BASED ON CONTRACTOR PRICE LIST)
Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2015
JFS Beyond Economical Remanufacture Evaluation (BER)
Bid B - First Article NOT Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
0015 AA
IAW STATEMENT OF WORK
JFS Beyond Economical Remanufacture Evaluation (BER) Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required
JFS Beyond Economical Remanufacture Evaluation (BER)
Bid B - First Article NOT Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2015
Applicability: None ;
JFS No-Fault Evaluation
Bid B - First Article NOT Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
0016 AA
IAW STATEMENT OF WORK
JFS - NO FAULT EVALUATION
Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2015
Travel
Bid B - First Article NOT Required Item No.
Cost Reimbursement - No Fee Quantity U/I Est Unit Cost Total Estimated Cost
1 LO
CLIN ACRN ACRN Total
0017 AA
IAW STATEMENT OF WORK
TRAVEL
Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
Travel
Bid B - First Article NOT Required
ISO 9001-2015 2015
Data - Countefeit Protection Plan (CPP)
Bid B - First Article NOT Required Item No.
Not Separately Priced Quantity U/I Unit Price
1 EA NSP
CLIN ACRN ACRN Total
0018 AA
CPP, CDRL A010
Data - Countefeit Protection Plan (CPP) Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2015
Type / Ship To Quantity (U/I) IAW DD1423-1 Req No / Pri
Required Delivery
1 EA IAW DD1423-1
Proposed Delivery
1 EA
Data - CDRLs A001-A010 (DD1423)
Bid B - First Article NOT Required Item No.
Not Separately Priced Quantity U/I Unit Price
1 LO NSP
CLIN ACRN ACRN Total
0019 AA
Data - CDRLs A001-A010 (DD1423)
Data - CDRLs A001-A010 (DD1423)
Bid B - First Article NOT Required
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2015
*ARO IAW DD1423 Exhibit A001 Through A009 and A011 through A012
ADG Overhaul - YEAR 2
Bid B - First Article NOT Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
1003 AA
NSN: 2835-01-208-0169 RP
ADG - YEAR 2
Manufacturer Part Number 3Y015 5007076B
9009H 2835PL0664313
99167 5007076B Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2008
Applicability: None ;
IUID Required: Yes Physical Item Markings:
Serial Number Required
Transportation From Continental United States CONUS (CONUS) Sources
TYPE / SHIP TO CODE F.O.B.
A SW3210 ORIGIN
Type / Ship To PACRN Mark For
A SW3210 PAV
Type / Ship To Quantity (U/I) *ARO After Receipt of
Carcass Req No / Pri
ADG Overhaul - YEAR 2
Bid B - First Article NOT Required Required Delivery
A SW3210 EA *1 Months
Proposed Delivery
A SW3210 EA
TAC: F3RS
JFS Overhaul - YEAR 2
Bid B - First Article NOT Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
1011 AA
NSN: 2835-01-689-2101 RP
JFS - YEAR 2
ENGINE,GAS TURBINE,
Manufacturer Part Number 55820 4550164 Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2008
Applicability: None ;
IUID Required: Yes Physical Item Markings:
Serial Number Required
Transportation From Continental United States CONUS (CONUS) Sources
TYPE / SHIP TO CODE F.O.B.
A SW3210 ORIGIN
Type / Ship To PACRN Mark For
A SW3210 PAG
Type / Ship To Quantity (U/I) *ARO After Receipt of
Carcass Req No / Pri
Required Delivery
JFS Overhaul - YEAR 2
Bid B - First Article NOT Required A SW3210 EA *1 Months
Proposed Delivery
A SW3210 EA
TAC: F3RS
JFS Overhaul (Legacy) - YEAR 2
Bid B - First Article NOT Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
1012 AA
NSN: 2835-01-308-3769 RP
JFS (LEGACY) - YEAR 2
ENGINE,GAS TURBINE,
Manufacturer Part Number 55820 160001-1100A 55820 160001-1100B 55820 160001-401/1101 55820 160001-924-03 55820 4504554
9009H 2835PL1614475
9009H 2835PL1614504
9009H 2835PL1615448
99167 5914011 Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2008
Applicability: None ;
IUID Required: Yes Physical Item Markings:
Serial Number Required
Transportation From Continental United States CONUS (CONUS) Sources
TYPE / SHIP TO CODE F.O.B.
A SW3210 ORIGIN
Type / Ship To PACRN Mark For
JFS Overhaul (Legacy) - YEAR 2
Bid B - First Article NOT Required
A SW3210 PAA
Type / Ship To Quantity (U/I) *ARO After Receipt of
Carcass Req No / Pri
Required Delivery
A SW3210 EA *1 Months
Proposed Delivery
A SW3210 EA
TAC: F3RS
ADG Overhaul - YEAR 3
Bid B - First Article NOT Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
2003 AA
NSN: 2835-01-208-0169 RP
ADG - YEAR 3
Manufacturer Part Number 3Y015 5007076B
9009H 2835PL0664313
99167 5007076B Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2008
Applicability: None ;
IUID Required: Yes Physical Item Markings:
Serial Number Required
Transportation From Continental United States CONUS (CONUS) Sources
TYPE / SHIP TO CODE F.O.B.
A SW3210 ORIGIN
A SW3210 PAV
ADG Overhaul - YEAR 3
Bid B - First Article NOT Required Type / Ship To Quantity (U/I) *ARO After Receipt of
Carcass Req No / Pri
Required Delivery
A SW3210 EA *1 Months
Proposed Delivery
A SW3210 EA
TAC: F3RS
JFS Overhaul - YEAR 3
Bid B - First Article NOT Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
2011 AA
NSN: 2835-01-689-2101 RP
JFS - YEAR 3
ENGINE,GAS TURBINE,
Manufacturer Part Number 55820 4550164 Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2008
Applicability: None ;
IUID Required: Yes Physical Item Markings:
Serial Number Required
Transportation From Continental United States CONUS (CONUS) Sources
TYPE / SHIP TO CODE F.O.B.
A SW3210 ORIGIN
Type / Ship To PACRN Mark For
A SW3210 PAG
Type / Ship To Quantity (U/I) *ARO After Receipt of
JFS Overhaul - YEAR 3
Bid B - First Article NOT Required Required Delivery
A SW3210 EA *1 Months
Proposed Delivery
A SW3210 EA
TAC: F3RS
JFS Overhaul (Legacy) - YEAR 3
Bid B - First Article NOT Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
2012 AA
NSN: 2835-01-308-3769 RP
JFS (LEGACY) - YEAR 3
ENGINE,GAS TURBINE,
Manufacturer Part Number 55820 160001-1100A 55820 160001-1100B 55820 160001-401/1101 55820 160001-924-03 55820 4504554
9009H 2835PL1614475
9009H 2835PL1614504
9009H 2835PL1615448
99167 5914011 Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2008
Applicability: None ;
IUID Required: Yes Physical Item Markings:
Serial Number Required
Transportation From Continental United States CONUS (CONUS) Sources
TYPE / SHIP TO CODE F.O.B.
JFS Overhaul (Legacy) - YEAR 3
Bid B - First Article NOT Required
A SW3210 ORIGIN
Type / Ship To PACRN Mark For
A SW3210 PAA
Type / Ship To Quantity (U/I) *ARO After Receipt of
Carcass Req No / Pri
Required Delivery
A SW3210 EA *1 Months
Proposed Delivery
A SW3210 EA
TAC: F3RS
ADG Overhaul - YEAR 4
Bid B - First Article NOT Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
3003 AA
NSN: 2835-01-208-0169 RP
ADG - YEAR 4
Manufacturer Part Number 3Y015 5007076B
9009H 2835PL0664313
99167 5007076B Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2008
Applicability: None ;
IUID Required: Yes Physical Item Markings:
Serial Number Required
Transportation From Continental United States CONUS (CONUS) Sources
TYPE / SHIP TO CODE F.O.B.
ADG Overhaul - YEAR 4
Bid B - First Article NOT Required
A SW3210 PAV
Type / Ship To Quantity (U/I) *ARO After Receipt of
Carcass Req No / Pri
Required Delivery
A SW3210 EA *1 Months
Proposed Delivery
A SW3210 EA
TAC: F3RS
JFS Overhaul - YEAR 4
Bid B - First Article NOT Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
3011 AA
NSN: 2835-01-689-2101 RP
JFS - YEAR 4
ENGINE,GAS TURBINE,
Manufacturer Part Number 55820 4550164 Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2008
Applicability: None ;
IUID Required: Yes Physical Item Markings:
Serial Number Required
Transportation From Continental United States CONUS (CONUS) Sources
TYPE / SHIP TO CODE F.O.B.
A SW3210 ORIGIN
Type / Ship To PACRN Mark For
A SW3210 PAG
Type / Ship To Quantity (U/I) *ARO After Receipt of
JFS Overhaul - YEAR 4
Bid B - First Article NOT Required Required Delivery
A SW3210 EA *1 Months
Proposed Delivery
A SW3210 EA
TAC: F3RS
JFS Overhaul (Legacy) - YEAR 4
Bid B - First Article NOT Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
3012 AA
NSN: 2835-01-308-3769 RP
JFS (LEGACY) - YEAR 4
ENGINE,GAS TURBINE,
Manufacturer Part Number 55820 160001-1100A 55820 160001-1100B 55820 160001-401/1101 55820 160001-924-03 55820 4504554
9009H 2835PL1614475
9009H 2835PL1614504
9009H 2835PL1615448
99167 5914011 Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2008
Applicability: None ;
IUID Required: Yes Physical Item Markings:
Serial Number Required
JFS Overhaul (Legacy) - YEAR 4
Bid B - First Article NOT Required
A SW3210 ORIGIN
Type / Ship To PACRN Mark For
A SW3210 PAA
Type / Ship To Quantity (U/I) *ARO After Receipt of
Carcass Req No / Pri
Required Delivery
A SW3210 EA *1 Months
Proposed Delivery
A SW3210 EA
TAC: F3RS
ADG Overhaul - YEAR 5
Bid B - First Article NOT Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
4003 AA
NSN: 2835-01-208-0169 RP
ADG - YEAR 5
Manufacturer Part Number 3Y015 5007076B
9009H 2835PL0664313
99167 5007076B Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2008
Applicability: None ;
IUID Required: Yes Physical Item Markings:
Serial Number Required
Transportation From Continental United States CONUS (CONUS) Sources
TYPE / SHIP TO CODE F.O.B.
ADG Overhaul - YEAR 5
Bid B - First Article NOT Required
A SW3210 PAV
Type / Ship To Quantity (U/I) *ARO After Receipt of
Carcass Req No / Pri
Required Delivery
A SW3210 EA *1 Months
Proposed Delivery
A SW3210 EA
TAC: F3RS
JFS Overhaul - YEAR 5
Bid B - First Article NOT Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
4011 AA
NSN: 2835-01-689-2101 RP
JFS - YEAR 5
ENGINE,GAS TURBINE,
Manufacturer Part Number 55820 4550164 Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2008
Applicability: None ;
IUID Required: Yes Physical Item Markings:
Serial Number Required
Transportation From Continental United States CONUS (CONUS) Sources
TYPE / SHIP TO CODE F.O.B.
A SW3210 ORIGIN
Type / Ship To PACRN Mark For
A SW3210 PAG
Type / Ship To Quantity (U/I) *ARO After Receipt of
JFS Overhaul - YEAR 5
Bid B - First Article NOT Required Required Delivery
A SW3210 EA *1 Months
Proposed Delivery
A SW3210 EA
TAC: F3RS
JFS Overhaul (Legacy) - YEAR 5
Bid B - First Article NOT Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
4012 AA
NSN: 2835-01-308-3769 RP
JFS (LEGACY) - YEAR 5
ENGINE,GAS TURBINE,
Manufacturer Part Number 55820 160001-1100A 55820 160001-1100B 55820 160001-401/1101 55820 160001-924-03 55820 4504554
9009H 2835PL1614475
9009H 2835PL1614504
9009H 2835PL1615448
99167 5914011 Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2008
Applicability: None ;
IUID Required: Yes Physical Item Markings:
Serial Number Required
JFS Overhaul (Legacy) - YEAR 5
Bid B - First Article NOT Required
A SW3210 ORIGIN
Type / Ship To PACRN Mark For
A SW3210 PAA
Type / Ship To Quantity (U/I) *ARO After Receipt of
Carcass Req No / Pri
Required Delivery
A SW3210 EA *1 Months
Proposed Delivery
A SW3210 EA
TAC: F3RS
ADG First Article (Option 1)
Bid A - First Article Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
1 EA
CLIN ACRN ACRN Total
5001 AA
NSN: 2835-01-208-0169 RP
ADG First Article
Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: IAW DD1423 - CDRL Applicability: None ;
IUID Required: Yes Physical Item Markings:
Serial Number Required Type / Ship To PACRN Mark For
A PLANT PAW
Type / Ship To Quantity (U/I) To be determined _ Req No / Pri
Required Delivery
A PLANT 1 EA TBD
Proposed Delivery
A PLANT 1 EA
TAC: F3RS
ADG First Article Test Report Data (Option 1)
Bid A - First Article Required Item No.
Not Separately Priced Quantity U/I Unit Price
1 EA NSP
CLIN ACRN ACRN Total
5002 AA
ADG First Article Test Report, CDRL B001 Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: IAW DD1423 - CDRL Type / Ship To Quantity (U/I) *ARO IAW CDRL B001 _ Req No / Pri
Required Delivery
+ IAW1423 1 EA
Proposed Delivery
+ IAW1423 1 EA
ADG Overhaul - YEAR 6 (Option 1)
Bid B - First Article NOT Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
5003 AA
NSN: 2835-01-208-0169 RP
ADG - YEAR 6
Manufacturer Part Number 3Y015 5007076B
9009H 2835PL0664313
99167 5007076B
ADG Overhaul - YEAR 6 (Option 1)
Bid B - First Article NOT Required
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2008
Applicability: None ;
IUID Required: Yes Physical Item Markings:
Serial Number Required
Transportation From Continental United States CONUS (CONUS) Sources
TYPE / SHIP TO CODE F.O.B.
A SW3210 ORIGIN
Type / Ship To PACRN Mark For
A SW3210 PAV
Type / Ship To Quantity (U/I) *ARO After Receipt of
Carcass Req No / Pri
Required Delivery
A SW3210 EA *1 Months
Proposed Delivery
A SW3210 EA
TAC: F3RS
ADG Over and Above (Option 1)
Bid B - First Article NOT Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
5004 AA
Over and Above
IAW STATEMENT OF WORK
ADG OVER AND ABOVE
Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required
ADG Over and Above (Option 1)
Bid B - First Article NOT Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2015
ADG Commonly Missing Parts (Price List) (Option 1)
Bid B - First Article NOT Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
5005 AA
Data
IAW STATEMENT OF WORK
ADG - COMMONLY MISSING PARTS (BASED ON CONTRACTOR PRICE LIST)
Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2015
ADG Required Modifications (Price List) (Option 1)
Bid B - First Article NOT Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
5006 AA
IAW STATEMENT OF WORK
ADG- REQUIRED MODIFICATIONS (BASED ON CONTRACTOR PRICE LIST)
Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
ISO 9001-2015 2015
ADG Beyond Economical remanufacture Evaluation (BER) (Option 1)
Bid B - First Article NOT Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
5007 AA
IAW STATEMENT OF WORK
ADG - BER
Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2015
Applicability: None ;
ADG No-Fault Evaluation (Option 1)
Bid B - First Article NOT Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
5008 AA
Data
IAW STATEMENT OF WORK
ADG - No Fault Evaluation Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Jet Fuel Starter (JFS) First Article (Option 1)
Bid A - First Article Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
1 EA
CLIN ACRN ACRN Total
5009 AA
NSN: 2835-01-689-2101 RP
JFS FIRST ARTICLE
Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: IAW DD1423 - CDRL Applicability: None ;
Buy American Act/Balance of Payments Program Type / Ship To PACRN Mark For
A PLANT PAW
Type / Ship To Quantity (U/I) To be determined _ Req No / Pri
Required Delivery
A PLANT 1 EA TBD
Proposed Delivery
A PLANT 1 EA
TAC: F3RS
JFS First Article Test Report Data (Option 1)
Bid A - First Article Required Item No.
Not Separately Priced Quantity U/I Unit Price
1 EA NSP
CLIN ACRN ACRN Total
5010 AA
JFS TEST REPORT, CDRL B001
JFS First Article Test Report Data (Option 1)
Bid A - First Article Required
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: IAW DD1423 - CDRL Type / Ship To Quantity (U/I) *ARO *ARO IAW
CDRL B001
_ Req No / Pri
Required Delivery
+ IAW1423 1 EA TBD
Proposed Delivery
+ IAW1423 1 EA
JFS Overhaul - YEAR 6 (Option 1)
Bid B - First Article NOT Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
5011 AA
NSN: 2835-01-689-2101 RP
JFS - YEAR 6
ENGINE,GAS TURBINE,
Manufacturer Part Number 55820 4550164 Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2015
Applicability: None ;
IUID Required: Yes Physical Item Markings:
Serial Number Required
JFS Overhaul - YEAR 6 (Option 1)
Bid B - First Article NOT Required
Transportation From Continental United States CONUS (CONUS) Sources
TYPE / SHIP TO CODE F.O.B.
A SW3210 ORIGIN
Type / Ship To PACRN Mark For
A SW3210 PAG
Type / Ship To Quantity (U/I) *ARO After Receipt of
Carcass Req No / Pri
Required Delivery
A SW3210 EA *1 Months
Proposed Delivery
A SW3210 EA
TAC: F3RS
JFS Overhaul (Legacy) - YEAR 6 (Option 1)
Bid B - First Article NOT Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
5012 AA
NSN: 2835-01-308-3769 RP
JFS (LEGACY) - YEAR 6
ENGINE,GAS TURBINE,
Manufacturer Part Number 55820 160001-1100A 55820 160001-1100B 55820 160001-401/1101 55820 160001-924-03 55820 4504554
9009H 2835PL1614475
9009H 2835PL1614504
9009H 2835PL1615448
99167 5914011 Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
JFS Overhaul (Legacy) - YEAR 6 (Option 1)
Bid B - First Article NOT Required Applicability: None ;
IUID Required: Yes Physical Item Markings:
Serial Number Required
Transportation From Continental United States CONUS (CONUS) Sources
TYPE / SHIP TO CODE F.O.B.
A SW3210 ORIGIN
Type / Ship To PACRN Mark For
A SW3210 PAA
Type / Ship To Quantity (U/I) *ARO After Receipt of
Carcass Req No / Pri
Required Delivery
A SW3210 EA *1 Months
Proposed Delivery
A SW3210 EA
TAC: F3RS
JFS Over and Above (Option 1)
Bid B - First Article NOT Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
5013 AA
IAW STATEMENT OF WORK
JFS OVER AND ABOVE
Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2015
JFS Commonly Missing Parts (Price List) (Option 1)
Bid B - First Article NOT Required Item No.
JFS Commonly Missing Parts (Price List) (Option 1)
Bid B - First Article NOT Required Firm Fixed Price Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
5014 AA
IAW STATEMENT OF WORK
JFS- CCOMMONLY MISSING PARTS (BASED ON CONTRACTOR PRICE LIST)
Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2015
JFS Beyond Economical Remanufacture Evaluation (BER) (Option 1)
Bid B - First Article NOT Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
5015 AA
IAW STATEMENT OF WORK
JFS - BER
Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2015
Applicability: None ;
JFS No-Fault Evaluation (Option 1)
Bid B - First Article NOT Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
JFS No-Fault Evaluation (Option 1)
Bid B - First Article NOT Required
EA
CLIN ACRN ACRN Total
5016 AA
IAW STATEMENT OF WORK
JFS - NO FAULT EVALUATION
Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2015
Travel (Option 1)
Bid B - First Article NOT Required Item No.
Cost Reimbursement - No Fee Quantity U/I Est Unit Cost Total Estimated Cost
1 LO
CLIN ACRN ACRN Total
5017 AA
IAW STATEMENT OF WORK
TRAVEL
Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2015
Data - Countefeit Protection Plan (CPP) (Option 1)
Bid B - First Article NOT Required Item No.
Not Separately Priced Quantity U/I Unit Price
1 EA NSP
CLIN ACRN ACRN Total
5018 AA
CPP, CDRL A010
Data - Countefeit Protection Plan (CPP) (Option 1)
Bid B - First Article NOT Required Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2015
Type / Ship To Quantity (U/I) IAW DD1423-1 Req No / Pri
Required Delivery
1 EA IAW DD1423-1
Proposed Delivery
1 EA
Data - CDRLs A001-A010 (DD1423) (Option 1)
Bid B - First Article NOT Required Item No.
Not Separately Priced Quantity U/I Unit Price
1 LO NSP
CLIN ACRN ACRN Total
5019 AA
DATA CDRLs A001 through A009, A011, A012.
Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
*ARO IAW DD1423 Exhibit A001 Through A009 and A011 through A012
ADG Overhaul - YEAR 7 (Option 1)
Bid B - First Article NOT Required Item No.
Firm Fixed Price Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
6003 AA
NSN: 2835-01-208-0169 RP
ADG - YEAR 7
Manufacturer Part Number 3Y015 5007076B
9009H 2835PL0664313
99167 5007076B Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2015
Applicability: None ;
IUID Required: Yes Physical Item Markings:
Serial Number Required
Transportation From Continental United States CONUS (CONUS) Sources
TYPE / SHIP TO CODE F.O.B.
A SW3210 ORIGIN
Type / Ship To PACRN Mark For
A SW3210 PAV
Type / Ship To Quantity (U/I) *ARO After Receipt of
Carcass Req No / Pri
Required Delivery
A SW3210 EA *1 Months
Proposed Delivery
A SW3210 EA
TAC: F3RS
JFS Overhaul - YEAR 7 (Option 1)
Bid B - First Article NOT Required
JFS Overhaul - YEAR 7 (Option 1)
Bid B - First Article NOT Required Firm Fixed Price Quantity U/I Unit Price Amount
EA
CLIN ACRN ACRN Total
6011 AA
NSN: 2835-01-689-2101 RP
JFS - YEAR 7
ENGINE,GAS TURBINE,
Manufacturer Part Number 55820 4550164 Priority: R
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)
Title Number Date Tailoring
ISO 9001-2015 2015
Applicability: None ;
IUID Required: Yes Physical Item Markings:
Serial Number Required
Transportation From Continental United States CONUS (CONUS) Sources
TYPE / SHIP TO CODE F.O.B.
A SW3210 ORIGIN
Type / Ship To PACRN Mark For
A SW3210 PAG
Type / Ship To Quantity (U/I) *ARO After Receipt of
Carcass Req No / Pri
Required Delivery
A SW3210 EA *1 Months
Proposed Delivery
A SW3210 EA
TAC: F3RS
JFS Overhaul (Legacy) - YEAR 7 (Option 1)
Bid B - First Article NOT…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .