ISP Network Cable Installation for B600 JBER Alaska

Closed Solicitation Posted

Solicitation number
W912D025R0010
Agency
Army Contracting Command Army Materiel Command, Department of Defense
Responses due
Set-aside
Total Small Business

Opportunity facts

NAICS code
238210 Electrical Contractors and Other Wiring Installation Contractors
PSC
N061 Installation Of Equipment- Electric Wire And Power Distribution Equipment
Place of performance
Jber, Alaska 99505, United States
Points of contact

Notice details come from SAM.gov. Updated .

About this opportunity

The Department of the Army Materiel Command Army Contracting Command is seeking a contractor to provide telecommunications infrastructure installation services for Building 600 at Joint Base Elmendorf Richardson (JBER), Alaska, supporting the U.S. Army's 311th Military Intelligence Battalion. The project requires installation and testing of Inside Plant (ISP) network cables for NIPRNET and SIPRNET connectivity, including CAT6 copper and fiber optic cables, along with implementation of a Honeywell Vindicator Integrated Commercial Intrusion Detection System (ICIDS) and Access Control System (ACS). All work must comply with DoD, Army, and industry standards mandated by public law 104-113, section 12 "Standards Conformity" (ANSI TIA/EIA telecommunications standards), as well as AR 380-5 and JBER Air Force standards. The contract will be awarded on a lowest-priced, technically acceptable basis, with evaluation factors including technical capability (installation plan and infrastructure test results) and price. The solicitation deadline has been extended to August 28, 2025, at 10:00 AM Alaska Standard Time, with questions having been due by August 21, 2025, and a site visit conducted on August 19, 2025.

This opportunity is designated as a total small business set-aside under NAICS code 238210 with a size standard of $19,000,000 for electrical contractors and other wiring installation contractors. The estimated contract value is approximately $180,000, representing a firm fixed-price requirement, with the previous contract (W912CN21P0072) having been terminated and this solicitation aimed at completing the remaining work. The contractor must complete the project within 60-90 days from contract award, with material lead times estimated at 6-8 weeks for specialized equipment including Cisco C9200CX switches, UPS systems, and Honeywell hardware/software licenses. Specific deliverables include 18 NIPR drops (144 total connectors) and 11 SIPR drops (88 total connectors), along with 12 strands of single-mode/single-strand fiber optic cable between designated rooms. The work will be performed at 600 Richardson Drive, Anchorage, Alaska 99505, within a secure military facility requiring proper base access clearances for contractor personnel.

Notice text

3 versions

Update #3 · Latest ·

-The purpose of this amendment (W912D025R00100003)is to extend the due date of the solicitation to 28 August 2025 at 10.00a.m. AKST as well as highlight the section 12 of the Statement of Work credential requirement for this contract which will be looked/reviewed for evaluation purposes.

See sam.gov for anwers to the RFI questions. 

All other terms and conditions remains unchanged.

-The puprose of this amendment (W912D0R00100002) is to provide an additional information (Base Access) to the site visit at Building 600, on 08/19/2025 at 10:00 a.m.

- Contracting Specialist will meet contractors requiring Base Access for the site visit at Fort Richardson Visitior's Center, Building 47303, JBER Anchorage, Alaska, from 09:00 a.m.-09:45 a.m.

The contractor shall provide the required materials, labors, and perform identified tasks within SOW for ISP Network cables ISO NIPRNET and SIPRNET connectivity. All repair and installation efforts shall be in accordance with DoD, Army, and the industry standards mandated by public-law 104-113, section 12 “Standards Conformity” (ANSI TIA/EIA telecommunications standards) as listed below. For ICIDS and ACS, the contractor shall procure, provide the required materials, install, and test Honeywell Vindicator ICIDS and ACS designed to meet or exceed AR 380-5 and JBER – Air force standards within BLDG 600, JBER, Alaska. Systems must be fully integrated into JBER – Air Force control IDS and ACS infrastructure and tested system performance verification in order to provide early warning of an intruder to active monitoring station, as well as all programming and integration of the receiver system per JBER base requirements for a fully functional and operational system.

Update #2 ·

The puprose of this amendment (W912D0R00100002) is to provide an additional information (Base Access) to the site visit at Building 600, on 08/19/2025 at 10:00 a.m.

- Contracting Specialist will meet contractors requiring Base Access for the site visit at Fort Richardson Visitior's Center, Building 47303, JBER Anchorage, Alaska, from 09:00 a.m.-09:45 a.m.

The contractor shall provide the required materials, labors, and perform identified tasks within SOW for ISP Network cables ISO NIPRNET and SIPRNET connectivity. All repair and installation efforts shall be in accordance with DoD, Army, and the industry standards mandated by public-law 104-113, section 12 “Standards Conformity” (ANSI TIA/EIA telecommunications standards) as listed below. For ICIDS and ACS, the contractor shall procure, provide the required materials, install, and test Honeywell Vindicator ICIDS and ACS designed to meet or exceed AR 380-5 and JBER – Air force standards within BLDG 600, JBER, Alaska. Systems must be fully integrated into JBER – Air Force control IDS and ACS infrastructure and tested system performance verification in order to provide early warning of an intruder to active monitoring station, as well as all programming and integration of the receiver system per JBER base requirements for a fully functional and operational system.

Update #1 ·

The contractor shall provide the required materials, labors, and perform identified tasks within SOW for ISP Network cables ISO NIPRNET and SIPRNET connectivity. All repair and installation efforts shall be in accordance with DoD, Army, and the industry standards mandated by public-law 104-113, section 12 “Standards Conformity” (ANSI TIA/EIA telecommunications standards) as listed below. For ICIDS and ACS, the contractor shall procure, provide the required materials, install, and test Honeywell Vindicator ICIDS and ACS designed to meet or exceed AR 380-5 and JBER – Air force standards within BLDG 600, JBER, Alaska. Systems must be fully integrated into JBER – Air Force control IDS and ACS infrastructure and tested system performance verification in order to provide early warning of an intruder to active monitoring station, as well as all programming and integration of the receiver system per JBER base requirements for a fully functional and operational system.

Attachments

Show all 11

On GovTribe

Work this opportunity on GovTribe

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity