Hazardous Waste Storage

Naval Sea Systems Command seeks manufacture, delivery, and turnkey installation of one NRTL-certified chemical storage building for the Naval Undersea Warfare Center Division Newport, with proposals due July 28, 2026 at 2:00 PM EST. This is a 100% small business set-aside procured as a firm-fixed-price award to the lowest price technically acceptable offeror.

Place of performance is Newport, Rhode Island, with F.O.B. Destination delivery required 185 days after receipt of order. The module must measure approximately 9 feet high by 34 feet wide by 9 feet deep (3 feet tolerance permitted for COTS designs), contain three equal compartments with internal fire-rated barrier walls, support a minimum 1,000-gallon sump with 250 psf floor load rating, and maintain R11 minimum insulation rating. The structure requires a minimum 4-hour fire rating on exterior and interior walls, three double doors (84 inches wide by 80 inches high minimum) with 3-hour fire rating and self-closing mechanisms, Class 1 Division 1/2 explosion-proof electrical and climate control systems, three explosion-proof LED fixtures, three explosion-proof exhaust systems with emergency shut-off switches, gravity-fed air inlet vents with 3-hour fire-rated fusible link dampers, integrated forklift pockets, four top-mounted crane lifting lugs, and a pre-engineered ABC dry chemical fire suppression system with local audible alarms. A relocatable heavy-duty steel access ramp with skid-resistant finishing compatible with all double-door entryways is required. The building must be UL Listed, FM Approved, or certified by an equivalent OSHA-recognized NRTL. Offerors must provide manufacturer engineering drawings, structural calculations, catalog cut sheets, valid NRTL certification documentation, and a signed security acknowledgment statement confirming compliance with NISPOM, OPSEC, and CUI protection requirements. CMMC Level 1 self-assessment is required prior to award. Proposals submitted in three volumes: Technical Capability (maximum 20 pages excluding drawings), Certifications & Security (no page limit), and Price Proposal (no page limit). The NAICS code is 332311, Prefabricated Metal Building and Component Manufacturing; PSC is 5410, Prefabricated and Portable Buildings.