Design-Bid-Build, FFG-62 Land Based Engineering Site, Philadelphia Navy Yard Annex, Philadelphia, PA

THIS IS A SOURCES SOUGHT NOTICE ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. THERE WILL NOT BE A SOLICITATION, SPECIFICATIONS, OR DRAWINGS AVAILABLE AT THIS TIME.

The purpose of this sources sought notice is to determine if there are commercially available and interested suppliers capable of performing the services pertaining to the following and as detailed in the provided Attachment(s) 2 - Technical Information:

1. Card Readers
   1. a. Manufacturer – ID Factors
      1. Product – Entry Point 2-Factor Dual Interface Reader
      2. Requirements – Card Reader is compatible with ESS Approved Product List (APL).

1. Power Supply Enclosure
   1. Manufacturer – Lenel United Technologies
      1. Product – LNL-AL600ULX-4CB6 
      2. Requirements – Lenel and Altronix power supplies included on APL.

1. Power Supply Enclosure
   1. Manufacturer – Altronix Corporation  
      1. Product – AL600ULACM
      2. Requirements – Lenel and Altronix power supplies included on APL.

1. Access Control System Dual Reader Interface (DRI) Module
   1. Manufacturer – LenelS2
      1. Product – LNL-1320 Series 3 DRI  
      2. Requirements – Compatibility with and included with the ESS APL.

1. Request to Exit Device (REX)
   1. Manufacturer – Bosch
      1. Product – DS160 Series High Performance REX Detectors
      2. Requirement – Compatibility with and included with the ESS APL.

1. Electric Strike
   1. Manufacturer – HES
      1. Product – 1006 Series Electric Strike
      2. Requirement – Compatibility with and included with the ESS APL.

1. Translucent Wall Panel
   1. Manufacturer – Kalwall
      1. Product – Kalwall – 2 ¾” thick sandwich panel, 0.70 Rose SW Exterior face, 0.045 Crystal type 25, 12x24 SHOJI Grid
      2. Requirement – To match existing translucent wall panel system to ensure compatibility.

1. Roof Enclosures for Class III Cable
   1. Manufacturer – Roof Penetration Housings, LLC
      1. Product – The Vault AWI Models
      2. Requirement – Enclosure suitable for the condition of the project for a weatherproof assembly that can be modified in the future by NSWC.

1. Fire Alarm Control Panel
   1. Manufacturer – Honeywell
      1. Product – Notifier N16 Fire Alarm Control Panel
      2. Requirement – Model must conform with the installation-wide standardization of Fire Alarm Control Panel manufacturer.

1. Control House Flood Doors
   1. Manufacturer – PS Flood Barriers/Hydro 1-PD250
      1. Product – PS Flood Barriers/Hydro 1-PD250
      2. Requirement – This product is the only flood door that complies with both the “Buy America Act” and accessibility requirements per the “Architectural Barriers Act”.

1. Thermal Break at Column Splices
   1. Manufacturer – Fabreeka
      1. Product – Fabreeka Thermal Breaks
      2. Requirement – This product is the only thermal break material appropriate for this application and verified to comply with the “Buy American Act”.

1. Fire Alarm Radio Transmitter
   1. Manufacturer – AES Corporation
      1. Product – 7707 Fire Subscribers IntelliNet 2.0
      2. Requirement – Compatibility with existing signaling network equipment.

1. Kinetix System
   1. Manufacturer – Kinetix
      1. Product – Kinetix to program new head end receiver
      2. Requirement – Kinetix is the existing maintenance contractor who programs the AES/Intellinet Head End Fire Alarm receiver in Building 29. Allowing this vendor to provide the program will result in seamless integration with the existing system.

1. Fuel Oil System Equipment
   1. Manufacturer – Preferred Utilities Mfg Corporation
      1. Product – P-7A/P-7B (IMO3DB-BG1333-200GPM-150), FOH-1 (THBG-266KW-Z1333-18064), FOFS-1 (PFBG-200GPM-Z1333-18064-WR), Day Tank Controls (DT-BG-FSC-18064), and FORP-1 (ATPSF-BG1333-50GPM-D-DP-L)
      2. Requirement – Fuel oil equipment assemblies to be furnished by a single manufacturer (Preferred Utilities Manufacturing Corporation or approved equal) to ensure coordination and interoperability of the fuel oil system. This will also contribute greatly to the ease of construction and startup. These items include the main fuel oil distribution pumps (P-7A & P-7B), fuel oil heater (FOH-1), recirculating pump (FORP-1), filter separator (FOFS-1), and 5,000-gallon day tank controls.

1. Balanced Magnetic Switch
   1. Manufacturer – Magnasphere
      1. Product – MSS Recessed/Concealed Series
      2. Requirement – NSWC utilizes Magnasphere switches and sensors for door status monitoring.

1. Motorized Locking Door Trim
   1. Manufacturer – Von Duprin
      1. Product – M966L/L-BE
      2. Requirement – Door hardware and accessories provided by door manufacturer for rim/vertical door installations.

This is a market research tool being used to determine the availability and adequacy of potential sources prior to determining the method of acquisition and issuance of an award. The Government is not obligated to and will not pay for any information received from potential sources as a result of this synopsis. It is requested that interested vendors submit to the contracting office a brief capabilities statement package (no more than 5 pages total) demonstrating the ability to provide the product with the specifications described above. 

Interested Sources are invited to respond to this Source Sought by completing Attachment 1 – Company Information and providing product technical information and specification sheets.

The Capabilities Statement Package shall not exceed 5 pages and shall ONLY be submitted electronically to Brittany Cristelli, brittany.n.cristelli.civ@us.navy.mil  and MUST be limited to a 4MB attachment. You are encouraged to request a read receipt or acknowledgement via reply email.

RESPONSES ARE DUE NO LATER THAN FRIDAY, 10 MAY 2024 AT 2:00 PM EASTERN DAYLIGHT TIME. LATE RESPONSES WILL NOT BE CONSIDERED.