Azimuth Gearbox Assembly Procurement

The GLOBUS Program is a bi-national collaborative effort, supporting critical radar and communications systems with unique operational requirements and is hosted at Outside Continental United States (OCONUS) location. The GLOBUS System of Systems consists of an S-Band (GLOBUS-S) phased array radar, an X-Band (GLOBUS-X) dish radar, an Integrated System Controller (ISC) computer system, and a Mission Communication Suite (MCS) which was fielded in 2023. The United States Air Force, through AFMC, is responsible for the procurement of capital equipment at the operational site, sustainment (to include spares), Urgent/Emergency Depot Level Maintenance, and oversight.

This acquisition represents a mission-critical investment to mitigate risk of a catastrophic failure of a GLOBUS-X Band azimuth gearbox (s). This acquisition will be for the procurement of two (2) azimuth gearbox spares. GLOBUS-X relies on worn gearboxes (originally manufactured in 1993) with only one (1) spare. Over the course of program history, the X-Band has experienced a catastrophic failure of one (1) azimuth gearbox impacting mission execution, most recently 2018. The X-Band radar rests on a unique azimuth bull gear and associated azimuth bearing assembly that permits the radar to be rotated in azimuth direction. The azimuth gearbox also includes a unique pinon gear that aligns with the bull gear to result in slower rotation but greater torque at the bull gear's output. The operating conditions of this gearbox are specific to this system with no known compatibility with any existing or future program/system.

The United States Air Force Life Cycle Management Center (AFLCMC) has a requirement as a part of its ongoing sustainment of the GLOBUS System of Systems. To ensure continued operational readiness of the critical GLOBUS-X radar system, this requirement is for the procurement of two (2) azimuth gearbox spares designed as direct form, fit, and function replacement for the current aging units. These custom gearboxes must precisely adhere to system specific mechanical and electrical specifications outlined in the AZ Gear Reducer Graham Sesia P/N QPP036M-U2-280 (280.42:1), RTX AZ Mod Kit drawing number D2220940, and associated drawings. Full technical specifications are detailed within the FSSM&I X-Band Pedestal Servo System Modernization document B2270320.

(i) The contractor shall design, develop, manufacture, and develop the Azimuth Gearboxes in accordance with the attached Statement of Work and associated technical data requirements referenced in this document.

(ii) The Government will not accept "Not Separately Priced (NSP)", " No Charge (N/C), $0.00, etc. on any line items other than those already designated in the schedule.

(iii) The Government intends to award a single Definitive Firm Fixed Price Contract, in accordance with FAR 16.202, as a result of this solicitation.

(iv) The Government will provide the GFP/GFE/GFI that is listed in Section J Attachment I.

(v) In accordance with DFARS 252.219-7003, Small Business Subcontracting Plan (DoD Contracts) if the proposal exceeds 900K, the offeror shall submit a subcontracting plan identifying small business goals for this effort in both percentages and dollars. If the Small Disadvantaged Business (SDB) goal is less than 5.0%, the offeror shall provide detailed rationale for the deficiency and strategies for encouraging SDB participation. If it is determined that no subcontracting possibilities exist, the offeror shall provide detailed rationale for the determination.

(vi) Offerors are advised to review all RFP documents and ensure that they are proposing to all requirements.

(vii) Notice to Offeror(s)/Supplier(s): Funds are not presently available for this effort. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs.

** Note 1: Offerors shall have an active System For Award Management (SAM) record.

** Note 2: Cybersecurity Maturity Model Certification (CMMC) contract requirements in DFARS Clause 252.204-7021 is included in this Solicitation. Companies must have a current Cybersecurity Maturity Model Certification status that meets or exceeds the requirements of LEVEL 2 (SELF)

** Note 3: Questions regarding this solicitation must be submitted in writing to the Points of Contact Listed. Government responses will be added to this posting. Please monitor this posting frequently. 

**Note 4: Issues accessing the attachments, please contact the Contracting Officer Brandon Jones.

Questions and Answers Posted 1 April 2026

Questions and Answers Posted 7 April 2026

Questions and Answers Posted 8 April 2026

Questions and Answers Posted 13 April 2026

Questions and Answers Posted 12 April 2026 Continued 

Questions and Answers Posted 20 April 2026

The GLOBUS Program is a bi-national collaborative effort, supporting critical radar and communications systems with unique operational requirements and is hosted at Outside Continental United States (OCONUS) location. The GLOBUS System of Systems consists of an S-Band (GLOBUS-S) phased array radar, an X-Band (GLOBUS-X) dish radar, an Integrated System Controller (ISC) computer system, and a Mission Communication Suite (MCS) which was fielded in 2023. The United States Air Force, through AFMC, is responsible for the procurement of capital equipment at the operational site, sustainment (to include spares), Urgent/Emergency Depot Level Maintenance, and oversight.

This acquisition represents a mission-critical investment to mitigate risk of a catastrophic failure of a GLOBUS-X Band azimuth gearbox (s). This acquisition will be for the procurement of two (2) azimuth gearbox spares. GLOBUS-X relies on worn gearboxes (originally manufactured in 1993) with only one (1) spare. Over the course of program history, the X-Band has experienced a catastrophic failure of one (1) azimuth gearbox impacting mission execution, most recently 2018. The X-Band radar rests on a unique azimuth bull gear and associated azimuth bearing assembly that permits the radar to be rotated in azimuth direction. The azimuth gearbox also includes a unique pinon gear that aligns with the bull gear to result in slower rotation but greater torque at the bull gear's output. The operating conditions of this gearbox are specific to this system with no known compatibility with any existing or future program/system.

The United States Air Force Life Cycle Management Center (AFLCMC) has a requirement as a part of its ongoing sustainment of the GLOBUS System of Systems. To ensure continued operational readiness of the critical GLOBUS-X radar system, this requirement is for the procurement of two (2) azimuth gearbox spares designed as direct form, fit, and function replacement for the current aging units. These custom gearboxes must precisely adhere to system specific mechanical and electrical specifications outlined in the AZ Gear Reducer Graham Sesia P/N QPP036M-U2-280 (280.42:1), RTX AZ Mod Kit drawing number D2220940, and associated drawings. Full technical specifications are detailed within the FSSM&I X-Band Pedestal Servo System Modernization document B2270320.

(i) The contractor shall design, develop, manufacture, and develop the Azimuth Gearboxes in accordance with the attached Statement of Work and associated technical data requirements referenced in this document.

(ii) The Government will not accept "Not Separately Priced (NSP)", " No Charge (N/C), $0.00, etc. on any line items other than those already designated in the schedule.

(iii) The Government intends to award a single Definitive Firm Fixed Price Contract, in accordance with FAR 16.202, as a result of this solicitation.

(iv) The Government will provide the GFP/GFE/GFI that is listed in Section J Attachment I.

(v) In accordance with DFARS 252.219-7003, Small Business Subcontracting Plan (DoD Contracts) if the proposal exceeds 900K, the offeror shall submit a subcontracting plan identifying small business goals for this effort in both percentages and dollars. If the Small Disadvantaged Business (SDB) goal is less than 5.0%, the offeror shall provide detailed rationale for the deficiency and strategies for encouraging SDB participation. If it is determined that no subcontracting possibilities exist, the offeror shall provide detailed rationale for the determination.

(vi) Offerors are advised to review all RFP documents and ensure that they are proposing to all requirements.

(vii) Notice to Offeror(s)/Supplier(s): Funds are not presently available for this effort. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs.

** Note 1: Offerors shall have an active System For Award Management (SAM) record.

** Note 2: Cybersecurity Maturity Model Certification (CMMC) contract requirements in DFARS Clause 252.204-7021 is included in this Solicitation. Companies must have a current Cybersecurity Maturity Model Certification status that meets or exceeds the requirements of LEVEL 2 (SELF)

** Note 3: Questions regarding this solicitation must be submitted in writing to the Points of Contact Listed. Government responses will be added to this posting. Please monitor this posting frequently. 

**Note 4: Issues accessing the attachments, please contact the Contracting Officer Brandon Jones.

Questions and Answers Posted 1 April 2026

Questions and Answers Posted 7 April 2026

Questions and Answers Posted 8 April 2026

Questions and Answers Posted 13 April 2026

Questions and Answers Posted 12 April 2026 Continued 

The GLOBUS Program is a bi-national collaborative effort, supporting critical radar and communications systems with unique operational requirements and is hosted at Outside Continental United States (OCONUS) location. The GLOBUS System of Systems consists of an S-Band (GLOBUS-S) phased array radar, an X-Band (GLOBUS-X) dish radar, an Integrated System Controller (ISC) computer system, and a Mission Communication Suite (MCS) which was fielded in 2023. The United States Air Force, through AFMC, is responsible for the procurement of capital equipment at the operational site, sustainment (to include spares), Urgent/Emergency Depot Level Maintenance, and oversight.

This acquisition represents a mission-critical investment to mitigate risk of a catastrophic failure of a GLOBUS-X Band azimuth gearbox (s). This acquisition will be for the procurement of two (2) azimuth gearbox spares. GLOBUS-X relies on worn gearboxes (originally manufactured in 1993) with only one (1) spare. Over the course of program history, the X-Band has experienced a catastrophic failure of one (1) azimuth gearbox impacting mission execution, most recently 2018. The X-Band radar rests on a unique azimuth bull gear and associated azimuth bearing assembly that permits the radar to be rotated in azimuth direction. The azimuth gearbox also includes a unique pinon gear that aligns with the bull gear to result in slower rotation but greater torque at the bull gear's output. The operating conditions of this gearbox are specific to this system with no known compatibility with any existing or future program/system.

The United States Air Force Life Cycle Management Center (AFLCMC) has a requirement as a part of its ongoing sustainment of the GLOBUS System of Systems. To ensure continued operational readiness of the critical GLOBUS-X radar system, this requirement is for the procurement of two (2) azimuth gearbox spares designed as direct form, fit, and function replacement for the current aging units. These custom gearboxes must precisely adhere to system specific mechanical and electrical specifications outlined in the AZ Gear Reducer Graham Sesia P/N QPP036M-U2-280 (280.42:1), RTX AZ Mod Kit drawing number D2220940, and associated drawings. Full technical specifications are detailed within the FSSM&I X-Band Pedestal Servo System Modernization document B2270320.

(i) The contractor shall design, develop, manufacture, and develop the Azimuth Gearboxes in accordance with the attached Statement of Work and associated technical data requirements referenced in this document.

(ii) The Government will not accept "Not Separately Priced (NSP)", " No Charge (N/C), $0.00, etc. on any line items other than those already designated in the schedule.

(iii) The Government intends to award a single Definitive Firm Fixed Price Contract, in accordance with FAR 16.202, as a result of this solicitation.

(iv) The Government will provide the GFP/GFE/GFI that is listed in Section J Attachment I.

(v) In accordance with DFARS 252.219-7003, Small Business Subcontracting Plan (DoD Contracts) if the proposal exceeds 900K, the offeror shall submit a subcontracting plan identifying small business goals for this effort in both percentages and dollars. If the Small Disadvantaged Business (SDB) goal is less than 5.0%, the offeror shall provide detailed rationale for the deficiency and strategies for encouraging SDB participation. If it is determined that no subcontracting possibilities exist, the offeror shall provide detailed rationale for the determination.

(vi) Offerors are advised to review all RFP documents and ensure that they are proposing to all requirements.

(vii) Notice to Offeror(s)/Supplier(s): Funds are not presently available for this effort. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs.

** Note 1: Offerors shall have an active System For Award Management (SAM) record.

** Note 2: Cybersecurity Maturity Model Certification (CMMC) contract requirements in DFARS Clause 252.204-7021 is included in this Solicitation. Companies must have a current Cybersecurity Maturity Model Certification status that meets or exceeds the requirements of LEVEL 2 (SELF)

** Note 3: Questions regarding this solicitation must be submitted in writing to the Points of Contact Listed. Government responses will be added to this posting. Please monitor this posting frequently. 

**Note 4: Issues accessing the attachments, please contact the Contracting Officer Brandon Jones.

Questions and Answers Posted 1 April 2026

Questions and Answers Posted 7 April 2026

Questions and Answers Posted 8 April 2026

Questions and Answers Posting 13 April 2026

The GLOBUS Program is a bi-national collaborative effort, supporting critical radar and communications systems with unique operational requirements and is hosted at Outside Continental United States (OCONUS) location. The GLOBUS System of Systems consists of an S-Band (GLOBUS-S) phased array radar, an X-Band (GLOBUS-X) dish radar, an Integrated System Controller (ISC) computer system, and a Mission Communication Suite (MCS) which was fielded in 2023. The United States Air Force, through AFMC, is responsible for the procurement of capital equipment at the operational site, sustainment (to include spares), Urgent/Emergency Depot Level Maintenance, and oversight.

This acquisition represents a mission-critical investment to mitigate risk of a catastrophic failure of a GLOBUS-X Band azimuth gearbox (s). This acquisition will be for the procurement of two (2) azimuth gearbox spares. GLOBUS-X relies on worn gearboxes (originally manufactured in 1993) with only one (1) spare. Over the course of program history, the X-Band has experienced a catastrophic failure of one (1) azimuth gearbox impacting mission execution, most recently 2018. The X-Band radar rests on a unique azimuth bull gear and associated azimuth bearing assembly that permits the radar to be rotated in azimuth direction. The azimuth gearbox also includes a unique pinon gear that aligns with the bull gear to result in slower rotation but greater torque at the bull gear's output. The operating conditions of this gearbox are specific to this system with no known compatibility with any existing or future program/system.

The United States Air Force Life Cycle Management Center (AFLCMC) has a requirement as a part of its ongoing sustainment of the GLOBUS System of Systems. To ensure continued operational readiness of the critical GLOBUS-X radar system, this requirement is for the procurement of two (2) azimuth gearbox spares designed as direct form, fit, and function replacement for the current aging units. These custom gearboxes must precisely adhere to system specific mechanical and electrical specifications outlined in the AZ Gear Reducer Graham Sesia P/N QPP036M-U2-280 (280.42:1), RTX AZ Mod Kit drawing number D2220940, and associated drawings. Full technical specifications are detailed within the FSSM&I X-Band Pedestal Servo System Modernization document B2270320.

(i) The contractor shall design, develop, manufacture, and develop the Azimuth Gearboxes in accordance with the attached Statement of Work and associated technical data requirements referenced in this document.

(ii) The Government will not accept "Not Separately Priced (NSP)", " No Charge (N/C), $0.00, etc. on any line items other than those already designated in the schedule.

(iii) The Government intends to award a single Definitive Firm Fixed Price Contract, in accordance with FAR 16.202, as a result of this solicitation.

(iv) The Government will provide the GFP/GFE/GFI that is listed in Section J Attachment I.

(v) In accordance with DFARS 252.219-7003, Small Business Subcontracting Plan (DoD Contracts) if the proposal exceeds 900K, the offeror shall submit a subcontracting plan identifying small business goals for this effort in both percentages and dollars. If the Small Disadvantaged Business (SDB) goal is less than 5.0%, the offeror shall provide detailed rationale for the deficiency and strategies for encouraging SDB participation. If it is determined that no subcontracting possibilities exist, the offeror shall provide detailed rationale for the determination.

(vi) Offerors are advised to review all RFP documents and ensure that they are proposing to all requirements.

(vii) Notice to Offeror(s)/Supplier(s): Funds are not presently available for this effort. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs.

** Note 1: Offerors shall have an active System For Award Management (SAM) record.

** Note 2: Cybersecurity Maturity Model Certification (CMMC) contract requirements in DFARS Clause 252.204-7021 is included in this Solicitation. Companies must have a current Cybersecurity Maturity Model Certification status that meets or exceeds the requirements of LEVEL 2 (SELF)

** Note 3: Questions regarding this solicitation must be submitted in writing to the Points of Contact Listed. Government responses will be added to this posting. Please monitor this posting frequently. 

**Note 4: Issues accessing the attachments, please contact the Contracting Officer Brandon Jones.

Questions and Answers Posted 1 April 2026

Questions and Answers Posted 7 April 2026

Questions and Answers Posted 8 April 2026

The GLOBUS Program is a bi-national collaborative effort, supporting critical radar and communications systems with unique operational requirements and is hosted at Outside Continental United States (OCONUS) location. The GLOBUS System of Systems consists of an S-Band (GLOBUS-S) phased array radar, an X-Band (GLOBUS-X) dish radar, an Integrated System Controller (ISC) computer system, and a Mission Communication Suite (MCS) which was fielded in 2023. The United States Air Force, through AFMC, is responsible for the procurement of capital equipment at the operational site, sustainment (to include spares), Urgent/Emergency Depot Level Maintenance, and oversight.

This acquisition represents a mission-critical investment to mitigate risk of a catastrophic failure of a GLOBUS-X Band azimuth gearbox (s). This acquisition will be for the procurement of two (2) azimuth gearbox spares. GLOBUS-X relies on worn gearboxes (originally manufactured in 1993) with only one (1) spare. Over the course of program history, the X-Band has experienced a catastrophic failure of one (1) azimuth gearbox impacting mission execution, most recently 2018. The X-Band radar rests on a unique azimuth bull gear and associated azimuth bearing assembly that permits the radar to be rotated in azimuth direction. The azimuth gearbox also includes a unique pinon gear that aligns with the bull gear to result in slower rotation but greater torque at the bull gear's output. The operating conditions of this gearbox are specific to this system with no known compatibility with any existing or future program/system.

The United States Air Force Life Cycle Management Center (AFLCMC) has a requirement as a part of its ongoing sustainment of the GLOBUS System of Systems. To ensure continued operational readiness of the critical GLOBUS-X radar system, this requirement is for the procurement of two (2) azimuth gearbox spares designed as direct form, fit, and function replacement for the current aging units. These custom gearboxes must precisely adhere to system specific mechanical and electrical specifications outlined in the AZ Gear Reducer Graham Sesia P/N QPP036M-U2-280 (280.42:1), RTX AZ Mod Kit drawing number D2220940, and associated drawings. Full technical specifications are detailed within the FSSM&I X-Band Pedestal Servo System Modernization document B2270320.

(i) The contractor shall design, develop, manufacture, and develop the Azimuth Gearboxes in accordance with the attached Statement of Work and associated technical data requirements referenced in this document.

(ii) The Government will not accept "Not Separately Priced (NSP)", " No Charge (N/C), $0.00, etc. on any line items other than those already designated in the schedule.

(iii) The Government intends to award a single Definitive Firm Fixed Price Contract, in accordance with FAR 16.202, as a result of this solicitation.

(iv) The Government will provide the GFP/GFE/GFI that is listed in Section J Attachment I.

(v) In accordance with DFARS 252.219-7003, Small Business Subcontracting Plan (DoD Contracts) if the proposal exceeds 900K, the offeror shall submit a subcontracting plan identifying small business goals for this effort in both percentages and dollars. If the Small Disadvantaged Business (SDB) goal is less than 5.0%, the offeror shall provide detailed rationale for the deficiency and strategies for encouraging SDB participation. If it is determined that no subcontracting possibilities exist, the offeror shall provide detailed rationale for the determination.

(vi) Offerors are advised to review all RFP documents and ensure that they are proposing to all requirements.

(vii) Notice to Offeror(s)/Supplier(s): Funds are not presently available for this effort. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs.

** Note 1: Offerors shall have an active System For Award Management (SAM) record.

** Note 2: Cybersecurity Maturity Model Certification (CMMC) contract requirements in DFARS Clause 252.204-7021 is included in this Solicitation. Companies must have a current Cybersecurity Maturity Model Certification status that meets or exceeds the requirements of LEVEL 2 (SELF)

** Note 3: Questions regarding this solicitation must be submitted in writing to the Points of Contact Listed. Government responses will be added to this posting. Please monitor this posting frequently. 

**Note 4: Issues accessing the attachments, please contact the Contracting Officer Brandon Jones.

Questions and Answers Posted 1 April 2026

Questions and Answers Posted 7 April 2026

The GLOBUS Program is a bi-national collaborative effort, supporting critical radar and communications systems with unique operational requirements and is hosted at Outside Continental United States (OCONUS) location. The GLOBUS System of Systems consists of an S-Band (GLOBUS-S) phased array radar, an X-Band (GLOBUS-X) dish radar, an Integrated System Controller (ISC) computer system, and a Mission Communication Suite (MCS) which was fielded in 2023. The United States Air Force, through AFMC, is responsible for the procurement of capital equipment at the operational site, sustainment (to include spares), Urgent/Emergency Depot Level Maintenance, and oversight.

This acquisition represents a mission-critical investment to mitigate risk of a catastrophic failure of a GLOBUS-X Band azimuth gearbox (s). This acquisition will be for the procurement of two (2) azimuth gearbox spares. GLOBUS-X relies on worn gearboxes (originally manufactured in 1993) with only one (1) spare. Over the course of program history, the X-Band has experienced a catastrophic failure of one (1) azimuth gearbox impacting mission execution, most recently 2018. The X-Band radar rests on a unique azimuth bull gear and associated azimuth bearing assembly that permits the radar to be rotated in azimuth direction. The azimuth gearbox also includes a unique pinon gear that aligns with the bull gear to result in slower rotation but greater torque at the bull gear's output. The operating conditions of this gearbox are specific to this system with no known compatibility with any existing or future program/system.

The United States Air Force Life Cycle Management Center (AFLCMC) has a requirement as a part of its ongoing sustainment of the GLOBUS System of Systems. To ensure continued operational readiness of the critical GLOBUS-X radar system, this requirement is for the procurement of two (2) azimuth gearbox spares designed as direct form, fit, and function replacement for the current aging units. These custom gearboxes must precisely adhere to system specific mechanical and electrical specifications outlined in the AZ Gear Reducer Graham Sesia P/N QPP036M-U2-280 (280.42:1), RTX AZ Mod Kit drawing number D2220940, and associated drawings. Full technical specifications are detailed within the FSSM&I X-Band Pedestal Servo System Modernization document B2270320.

(i) The contractor shall design, develop, manufacture, and develop the Azimuth Gearboxes in accordance with the attached Statement of Work and associated technical data requirements referenced in this document.

(ii) The Government will not accept "Not Separately Priced (NSP)", " No Charge (N/C), $0.00, etc. on any line items other than those already designated in the schedule.

(iii) The Government intends to award a single Definitive Firm Fixed Price Contract, in accordance with FAR 16.202, as a result of this solicitation.

(iv) The Government will provide the GFP/GFE/GFI that is listed in Section J Attachment I.

(v) In accordance with DFARS 252.219-7003, Small Business Subcontracting Plan (DoD Contracts) if the proposal exceeds 900K, the offeror shall submit a subcontracting plan identifying small business goals for this effort in both percentages and dollars. If the Small Disadvantaged Business (SDB) goal is less than 5.0%, the offeror shall provide detailed rationale for the deficiency and strategies for encouraging SDB participation. If it is determined that no subcontracting possibilities exist, the offeror shall provide detailed rationale for the determination.

(vi) Offerors are advised to review all RFP documents and ensure that they are proposing to all requirements.

(vii) Notice to Offeror(s)/Supplier(s): Funds are not presently available for this effort. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs.

** Note 1: Offerors shall have an active System For Award Management (SAM) record.

** Note 2: Cybersecurity Maturity Model Certification (CMMC) contract requirements in DFARS Clause 252.204-7021 is included in this Solicitation. Companies must have a current Cybersecurity Maturity Model Certification status that meets or exceeds the requirements of LEVEL 2 (SELF)

** Note 3: Questions regarding this solicitation must be submitted in writing to the Points of Contact Listed. Government responses will be added to this posting. Please monitor this posting frequently. 

**Note 4: Issues accessing the attachments, please contact the Contracting Officer Brandon Jones.

Questions and Answers Posted 1 April 2026

The GLOBUS Program is a bi-national collaborative effort, supporting critical radar and communications systems with unique operational requirements and is hosted at Outside Continental United States (OCONUS) location. The GLOBUS System of Systems consists of an S-Band (GLOBUS-S) phased array radar, an X-Band (GLOBUS-X) dish radar, an Integrated System Controller (ISC) computer system, and a Mission Communication Suite (MCS) which was fielded in 2023. The United States Air Force, through AFMC, is responsible for the procurement of capital equipment at the operational site, sustainment (to include spares), Urgent/Emergency Depot Level Maintenance, and oversight.

This acquisition represents a mission-critical investment to mitigate risk of a catastrophic failure of a GLOBUS-X Band azimuth gearbox (s). This acquisition will be for the procurement of two (2) azimuth gearbox spares. GLOBUS-X relies on worn gearboxes (originally manufactured in 1993) with only one (1) spare. Over the course of program history, the X-Band has experienced a catastrophic failure of one (1) azimuth gearbox impacting mission execution, most recently 2018. The X-Band radar rests on a unique azimuth bull gear and associated azimuth bearing assembly that permits the radar to be rotated in azimuth direction. The azimuth gearbox also includes a unique pinon gear that aligns with the bull gear to result in slower rotation but greater torque at the bull gear's output. The operating conditions of this gearbox are specific to this system with no known compatibility with any existing or future program/system.

The United States Air Force Life Cycle Management Center (AFLCMC) has a requirement as a part of its ongoing sustainment of the GLOBUS System of Systems. To ensure continued operational readiness of the critical GLOBUS-X radar system, this requirement is for the procurement of two (2) azimuth gearbox spares designed as direct form, fit, and function replacement for the current aging units. These custom gearboxes must precisely adhere to system specific mechanical and electrical specifications outlined in the AZ Gear Reducer Graham Sesia P/N QPP036M-U2-280 (280.42:1), RTX AZ Mod Kit drawing number D2220940, and associated drawings. Full technical specifications are detailed within the FSSM&I X-Band Pedestal Servo System Modernization document B2270320.

(i) The contractor shall design, develop, manufacture, and develop the Azimuth Gearboxes in accordance with the attached Statement of Work and associated technical data requirements referenced in this document.

(ii) The Government will not accept "Not Separately Priced (NSP)", " No Charge (N/C), $0.00, etc. on any line items other than those already designated in the schedule.

(iii) The Government intends to award a single Definitive Firm Fixed Price Contract, in accordance with FAR 16.202, as a result of this solicitation.

(iv) The Government will provide the GFP/GFE/GFI that is listed in Section J Attachment I.

(v) In accordance with DFARS 252.219-7003, Small Business Subcontracting Plan (DoD Contracts) if the proposal exceeds 900K, the offeror shall submit a subcontracting plan identifying small business goals for this effort in both percentages and dollars. If the Small Disadvantaged Business (SDB) goal is less than 5.0%, the offeror shall provide detailed rationale for the deficiency and strategies for encouraging SDB participation. If it is determined that no subcontracting possibilities exist, the offeror shall provide detailed rationale for the determination.

(vi) Offerors are advised to review all RFP documents and ensure that they are proposing to all requirements.

(vii) Notice to Offeror(s)/Supplier(s): Funds are not presently available for this effort. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs.

** Note 1: Offerors shall have an active System For Award Management (SAM) record.

** Note 2: Cybersecurity Maturity Model Certification (CMMC) contract requirements in DFARS Clause 252.204-7021 is included in this Solicitation. Companies must have a current Cybersecurity Maturity Model Certification status that meets or exceeds the requirements of LEVEL 2 (SELF)

** Note 3: Questions regarding this solicitation must be submitted in writing to the Points of Contact Listed. Government responses will be added to this posting. Please monitor this posting frequently. 

**Note 4: Issues accessing the attachments, please contact the Contracting Officer Brandon Jones.