3270 Ensley Dry Dock W912BU21B0003
Closed Solicitation Posted
- Solicitation number
- W912BU21B0003
- Agency
-
ENDIST Philadelphia
US Army Corps of Engineers, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 336611 Ship Building and Repairing
- PSC
- 1950 Floating Drydocks
- Place of performance
- United States
Notice details come from SAM.gov. Updated .
About this opportunity
This solicitation seeks the design, construction, delivery, and testing of one 168-foot floating dry dock to replace an existing dry dock at the Ensley Engineering Yard in Memphis, Tennessee. The U.S. Army Corps of Engineers, Philadelphia District will award a firm fixed-price contract for the dry dock, which must meet ABS classification standards. The solicitation is organized into four phases for planning, scheduling, engineering, construction, testing, and delivery, with separate notices to proceed required before starting each phase. The last day for questions is seven days before the closing date.
The solicitation is set aside for total small business and has a response deadline of June 15, 2021. The dry dock specifications include a length of 168 feet, beam of 77 feet, and width between wing walls of 60 feet. The projected schedule allocates 30 days for planning, 90 days for engineering, 330 days for construction and testing, and 45 days for delivery at the Ensley Engineering Yard in Memphis. Bonding, warranty, and liquidated damages will be required. PSC 863 and NAICS 336611 are applicable to this procurement of approximately $5 million for the dry dock.
Notice text
3 versions
Update #3 · Latest ·
The U.S. Army Corps of Engineers, Philadelphia District intends to initiate an Invitation for Bid (IFB) for the procurement of a new floating Dry Dock to replace an existing Dry Dock in the Memphis District of the U.S. Army Corps of Engineers, Ensley Engineering Yard.
PRINCIPAL CHARACTERISTICS
These specifications are intended to describe the required specifications for one floating dry dock. The principal dimensions of the dry dock are:
Length Molded 168’-0”
Beam Molded 77’-0”
Width between Wing Walls 60’-0”
Wing Wall Depth 31’-0”
Pontoon Deck Depth 9’-0”
Draft @ Max Lift Capacity 8’-0”
Draft @ Max Ballast 26’-0”
CONTRACT ORGANIZATION
A. CLIN 0001 – FLOATING DRY DOCK
- Phase 0001AA – PLANNING AND SCHEDULING
PHASE I – (The submittals required for Planning and Scheduling are listed in contract Clause H02.). This item is initiated only by a Notice to Proceed issued by the Contracting Officer.
2. Phase 0001AB – ENGINEERING
PHASE II – (The submittals for “Engineering” are listed in contract Clause H02.). This item is initiated only by a Notice To Proceed issued by the Contracting Officer. The Contractor may not start this item until he receives a Notice To Proceed for this item.
3. Phase 0001AC – CONSTRUCT & TEST
PHASE III – (The submittals for “Construct and Test” are listed in contract Clause H02.). This item is initiated only by a Notice To Proceed issued by the Contracting Officer. The Contractor may not start this item until he receives a Notice To Proceed for this item.
4. Phase 0001AD – DELIVER
PHASE IV – (The submittals for “Deliver” are listed in contract Clause H02.). This item is initiated only by a Notice To Proceed issued by the Contracting Officer. The Contractor may not start this item until he receives a Notice To Proceed for this item.
B. CLIN 0002 – OPTION FOR ADDITIONAL CAPSTANS
- This item initiated only by a Notice to Proceed issued by the Contracting Officer. The Contractor may not start this item until he receives a Notice to Proceed for this item.
C. PHASE SEQUENCING
It is intended that the four phases will be performed sequentially.
The time allotted in contract section F for each phase spans an interactive process involving both the Contractor and the Government. This process includes preparation, review and approval of the phase submittals, contract administration, mailing, preparation, and issuance of Notices to Proceed.
PROJECTED SCHEDULE FOR PHASING
Phase 0001AA – PLANNING AND SCHEDULING 30 Days
Phase 0001AB – ENGINEERING 90 Days
Phase 0001AC – CONSTRUCT & TEST 330 Days
Phase 0001AD – DELIVER 45 Days
The Contractor shall deliver the vessel afloat and ready for service at the following location:
ENSLEY ENGINEER YARD
2915 River Port Road
Memphis, TN 38109
F.O.B. Destination.
Bonding, warranty and liquidated damages will be required for this procurement.
*****************************************************************************************************************************************************
Amendment 0001
Changes to Notice:
- See attachment "EEY Drydock SOW" for originally intended formating of Section "C" found in the SF1449 solicitation. All information is identical except for the formatting issue.
Note: Attachment(s) under solicitation amendment(s) become part of the solicitation. Therefore, contractors are required to acknowledge solicitation amendments pursuant to FAR Provision 52.212-1.
*****************************************************************************************************************************************************
Amendment 0002
Changes to Notice:
- Clarify section "H" duplication found in the SOW.
- Revise section "Instruction to Offerors" to reflect correct bid opening date of 1 June 2021.
Note: Attachment(s) under solicitation amendment(s) become part of the solicitation. Therefore, contractors are required to acknowledge solicitation amendments pursuant to FAR Provision 52.212-1.
*****************************************************************************************************************************************************
Amendment 0003
Changes to Notice:
- Revise Sections "C" and "H"
- Answer RFIs
- Add Revised Drawings
- Extend offer due date until 15 June 2021
Note: Attachment(s) under solicitation amendment(s) become part of the solicitation. Therefore, contractors are required to acknowledge solicitation amendments pursuant to FAR Provision 52.212-1.
*****************************************************************************************************************************************************
Contracting Officer Notes:
Receipt of Requests for Information (RFI’s) – Contractor requesting clarifications of specifications, or questions regarding evaluation elements, or any questions related directly to this solicitation shall direct those inquiries to the following individual ONLY:
Michael J. Hunter - michael.j.hunter@usace.army.mil
Response to all RFI’s will be accomplished by Amendment to the Solicitation and will appear in Beta.SAM as an attachment to the Solicitation. Timing for the Amendments will be determined by the difficulty and volume of the RFI’s. RFI’s received after the cutoff date will not be considered or answered.
The cutoff date for the receipt of RFI’s will be 7 days prior to the closing of the Request for Proposal (W912BU21B0003).
Important Note(s):
- IAW FAR 4.1102 (a) Offerors and quoters are required to be registered in SAM (www.SAM.gov) at the time an offer or quotation is submitted in order to comply with the annual representations and certifications…
- All Services Disabled/Veterans Owned Business or Veterans Owned Small Business must be registered with the Department of Veterans Affairs Center of Veterans Enterprise Vet Biz Registry.
- Pursuant to FAR 22.1303(b) The Act requires submission of the VETS-4212 Report in all cases where the contractor or subcontractor has received an award of $150,000 or more, except for awards to State and local governments, and foreign organizations where the workers are recruited outside of the United States.
Warning: The official media for distribution of this Solicitation Notice is Contract Opportunities website, beta.SAM.gov. It is the responsibility of the interested vendor(s) to register and monitor the notice for any amendments. Offers that fail to furnish required representations or information, take into account amendments, or reject the terms and conditions of the solicitation may be excluded from consideration.
Update #2 ·
The U.S. Army Corps of Engineers, Philadelphia District intends to initiate an Invitation for Bid (IFB) for the procurement of a new floating Dry Dock to replace an existing Dry Dock in the Memphis District of the U.S. Army Corps of Engineers, Ensley Engineering Yard.
PRINCIPAL CHARACTERISTICS
These specifications are intended to describe the required specifications for one floating dry dock. The principal dimensions of the dry dock are:
Length Molded 168’-0”
Beam Molded 77’-0”
Width between Wing Walls 60’-0”
Wing Wall Depth 31’-0”
Pontoon Deck Depth 9’-0”
Draft @ Max Lift Capacity 8’-0”
Draft @ Max Ballast 26’-0”
CONTRACT ORGANIZATION
A. CLIN 0001 – FLOATING DRY DOCK
- Phase 0001AA – PLANNING AND SCHEDULING
PHASE I – (The submittals required for Planning and Scheduling are listed in contract Clause H02.). This item is initiated only by a Notice to Proceed issued by the Contracting Officer.
2. Phase 0001AB – ENGINEERING
PHASE II – (The submittals for “Engineering” are listed in contract Clause H02.). This item is initiated only by a Notice To Proceed issued by the Contracting Officer. The Contractor may not start this item until he receives a Notice To Proceed for this item.
3. Phase 0001AC – CONSTRUCT & TEST
PHASE III – (The submittals for “Construct and Test” are listed in contract Clause H02.). This item is initiated only by a Notice To Proceed issued by the Contracting Officer. The Contractor may not start this item until he receives a Notice To Proceed for this item.
4. Phase 0001AD – DELIVER
PHASE IV – (The submittals for “Deliver” are listed in contract Clause H02.). This item is initiated only by a Notice To Proceed issued by the Contracting Officer. The Contractor may not start this item until he receives a Notice To Proceed for this item.
B. CLIN 0002 – OPTION FOR ADDITIONAL CAPSTANS
- This item initiated only by a Notice to Proceed issued by the Contracting Officer. The Contractor may not start this item until he receives a Notice to Proceed for this item.
C. PHASE SEQUENCING
It is intended that the four phases will be performed sequentially.
The time allotted in contract section F for each phase spans an interactive process involving both the Contractor and the Government. This process includes preparation, review and approval of the phase submittals, contract administration, mailing, preparation, and issuance of Notices to Proceed.
PROJECTED SCHEDULE FOR PHASING
Phase 0001AA – PLANNING AND SCHEDULING 30 Days
Phase 0001AB – ENGINEERING 90 Days
Phase 0001AC – CONSTRUCT & TEST 330 Days
Phase 0001AD – DELIVER 45 Days
The Contractor shall deliver the vessel afloat and ready for service at the following location:
ENSLEY ENGINEER YARD
2915 River Port Road
Memphis, TN 38109
F.O.B. Destination.
Bonding, warranty and liquidated damages will be required for this procurement.
*****************************************************************************************************************************************************
Amendment 0001
Changes to Notice:
- See attachment "EEY Drydock SOW" for originally intended formating of Section "C" found in the SF1449 solicitation. All information is identical except for the formatting issue.
Note: Attachment(s) under solicitation amendment(s) become part of the solicitation. Therefore, contractors are required to acknowledge solicitation amendments pursuant to FAR Provision 52.212-1.
*****************************************************************************************************************************************************
Amendment 0002
Changes to Notice:
- Clarify section "H" duplication found in the SOW.
- Revise section "Instruction to Offerors" to reflect correct bid opening date of 1 JUne 2021.
Note: Attachment(s) under solicitation amendment(s) become part of the solicitation. Therefore, contractors are required to acknowledge solicitation amendments pursuant to FAR Provision 52.212-1.
*****************************************************************************************************************************************************
Contracting Officer Notes:
Receipt of Requests for Information (RFI’s) – Contractor requesting clarifications of specifications, or questions regarding evaluation elements, or any questions related directly to this solicitation shall direct those inquiries to the following individual ONLY:
Michael J. Hunter - michael.j.hunter@usace.army.mil
Response to all RFI’s will be accomplished by Amendment to the Solicitation and will appear in Beta.SAM as an attachment to the Solicitation. Timing for the Amendments will be determined by the difficulty and volume of the RFI’s. RFI’s received after the cutoff date will not be considered or answered.
The cutoff date for the receipt of RFI’s will be 7 days prior to the closing of the Request for Proposal (W912BU21B0003).
Important Note(s):
- IAW FAR 4.1102 (a) Offerors and quoters are required to be registered in SAM (www.SAM.gov) at the time an offer or quotation is submitted in order to comply with the annual representations and certifications…
- All Services Disabled/Veterans Owned Business or Veterans Owned Small Business must be registered with the Department of Veterans Affairs Center of Veterans Enterprise Vet Biz Registry.
- Pursuant to FAR 22.1303(b) The Act requires submission of the VETS-4212 Report in all cases where the contractor or subcontractor has received an award of $150,000 or more, except for awards to State and local governments, and foreign organizations where the workers are recruited outside of the United States.
Warning: The official media for distribution of this Solicitation Notice is Contract Opportunities website, beta.SAM.gov. It is the responsibility of the interested vendor(s) to register and monitor the notice for any amendments. Offers that fail to furnish required representations or information, take into account amendments, or reject the terms and conditions of the solicitation may be excluded from consideration.
Update #1 ·
The U.S. Army Corps of Engineers, Philadelphia District intends to initiate an Invitation for Bid (IFB) for the procurement of a new floating Dry Dock to replace an existing Dry Dock in the Memphis District of the U.S. Army Corps of Engineers, Ensley Engineering Yard.
PRINCIPAL CHARACTERISTICS
These specifications are intended to describe the required specifications for one floating dry dock. The principal dimensions of the dry dock are:
Length Molded 168’-0”
Beam Molded 77’-0”
Width between Wing Walls 60’-0”
Wing Wall Depth 31’-0”
Pontoon Deck Depth 9’-0”
Draft @ Max Lift Capacity 8’-0”
Draft @ Max Ballast 26’-0”
CONTRACT ORGANIZATION
A. CLIN 0001 – FLOATING DRY DOCK
- Phase 0001AA – PLANNING AND SCHEDULING
PHASE I – (The submittals required for Planning and Scheduling are listed in contract Clause H02.). This item is initiated only by a Notice to Proceed issued by the Contracting Officer.
2. Phase 0001AB – ENGINEERING
PHASE II – (The submittals for “Engineering” are listed in contract Clause H02.). This item is initiated only by a Notice To Proceed issued by the Contracting Officer. The Contractor may not start this item until he receives a Notice To Proceed for this item.
3. Phase 0001AC – CONSTRUCT & TEST
PHASE III – (The submittals for “Construct and Test” are listed in contract Clause H02.). This item is initiated only by a Notice To Proceed issued by the Contracting Officer. The Contractor may not start this item until he receives a Notice To Proceed for this item.
4. Phase 0001AD – DELIVER
PHASE IV – (The submittals for “Deliver” are listed in contract Clause H02.). This item is initiated only by a Notice To Proceed issued by the Contracting Officer. The Contractor may not start this item until he receives a Notice To Proceed for this item.
B. CLIN 0002 – OPTION FOR ADDITIONAL CAPSTANS
- This item initiated only by a Notice to Proceed issued by the Contracting Officer. The Contractor may not start this item until he receives a Notice to Proceed for this item.
C. PHASE SEQUENCING
It is intended that the four phases will be performed sequentially.
The time allotted in contract section F for each phase spans an interactive process involving both the Contractor and the Government. This process includes preparation, review and approval of the phase submittals, contract administration, mailing, preparation, and issuance of Notices to Proceed.
PROJECTED SCHEDULE FOR PHASING
Phase 0001AA – PLANNING AND SCHEDULING 30 Days
Phase 0001AB – ENGINEERING 90 Days
Phase 0001AC – CONSTRUCT & TEST 330 Days
Phase 0001AD – DELIVER 45 Days
The Contractor shall deliver the vessel afloat and ready for service at the following location:
ENSLEY ENGINEER YARD
2915 River Port Road
Memphis, TN 38109
F.O.B. Destination.
Bonding, warranty and liquidated damages will be required for this procurement.
*****************************************************************************************************************************************************
See attachment "EEY Drydock SOW" for originally intended formating of Section "C" found in the SF1449 solicitation. All information is identical except for the formatting issue.
*****************************************************************************************************************************************************
Contracting Officer Notes:
Receipt of Requests for Information (RFI’s) – Contractor requesting clarifications of specifications, or questions regarding evaluation elements, or any questions related directly to this solicitation shall direct those inquiries to the following individual ONLY:
Michael J. Hunter - michael.j.hunter@usace.army.mil
Response to all RFI’s will be accomplished by Amendment to the Solicitation and will appear in Beta.SAM as an attachment to the Solicitation. Timing for the Amendments will be determined by the difficulty and volume of the RFI’s. RFI’s received after the cutoff date will not be considered or answered.
The cutoff date for the receipt of RFI’s will be 7 days prior to the closing of the Request for Proposal (W912BU21B0003).
Important Note(s):
- IAW FAR 4.1102 (a) Offerors and quoters are required to be registered in SAM (www.SAM.gov) at the time an offer or quotation is submitted in order to comply with the annual representations and certifications…
- All Services Disabled/Veterans Owned Business or Veterans Owned Small Business must be registered with the Department of Veterans Affairs Center of Veterans Enterprise Vet Biz Registry.
- Pursuant to FAR 22.1303(b) The Act requires submission of the VETS-4212 Report in all cases where the contractor or subcontractor has received an award of $150,000 or more, except for awards to State and local governments, and foreign organizations where the workers are recruited outside of the United States.
Warning: The official media for distribution of this Solicitation Notice is Contract Opportunities website, beta.SAM.gov. It is the responsibility of the interested vendor(s) to register and monitor the notice for any amendments. Offers that fail to furnish required representations or information, take into account amendments, or reject the terms and conditions of the solicitation may be excluded from consideration.
Files
Show all 15
Notice history
| Notice | Type | Posted |
|---|---|---|
| This notice | Solicitation | |
| 3270 Ensley Dry Dock W912BU21B0003 | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Indefinite delivery indefinite quantity contract for inland and coastal vessels engineering services, naval architecture, and marine engineering | ENDIST Philadelphia | Total Small Business | |
| Guatemala - Tactical Dock | US Embassy Guatemala City | No set-aside | |
| 3389 Large Class Hopper Dredge (LCHD-ESS) | ENDIST Philadelphia | No set-aside | |
| Fort Eustis Dredge Material Management Area (FEDMMA) | ENDIST Norfolk | Total Small Business | |
| Reserve basin maintenance dredging contract for sites at the phildelphia navy yard in the public works department pennsylvania area of responsibiliy | Naval Facilities Engineering Command | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity