Word Vers- Exhibit #1 Sample Contract.doc
DOC document 218 KB Posted
- Attached to
- EWEB RFP 24-194-G 50 MVA TRANSFORMER
- Solicitation number
- S-P00140-00011885
- Issued by
- Lake County, Oregon
About this file
This document is a sample contract between the Eugene Water & Electric Board (EWEB) and a contractor for the provision of a 50 MVA Transformer for the Carmen-Smith project. The contract outlines the requirements for the contractor to furnish, deliver, assemble, and test the transformer at the Carmen load bank station site in Eugene, Oregon. The contractor is responsible for the complete manufacture, shipping, and field testing of the transformer, which must be delivered no later than a guaranteed lead time of XXX days after receipt of the order.
The contract specifies the technical requirements and testing procedures for the transformer, as well as the pricing structure with a not-to-exceed fee of $XXXXXX. The contractor is required to provide insurance coverage, comply with EWEB's sustainability policies, and maintain all necessary licenses and certifications. The contract term is for the duration of the project, with the possibility of renewal for up to five years.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Addendum 2~14.pdf | ||
| Addendum 1~21.pdf | ||
| Notice of Intent to Award-To All.pdf | ||
| Sample Price Agreement~3.docx | DOCX document | |
| Addendum 4~9.pdf | ||
| Addendum 3~9.pdf | ||
| 24-194-G 50 MVA Transformer Purchase.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
EXHIBIT #1 SAMPLE CONTRACT – WORD VERSION
EXHIBIT #1 SAMPLE CONTRACT – WORD VERSION
Contract for Goods 50 MVA Transformer for Carmen-Smith Contract No. 24-194-G By and between
Eugene Water & Electric Board and
XXXXXXXXX
This Contract is entered into by and between the Eugene Water & Electric Board, hereinafter called EWEB, and _______________., hereafter called Contractor.
RECITALS
WHEREAS, EWEB has negotiated the following agreement (“Agreement” or “Contract”) in Eugene, Oregon, and Contractor has agreed to deliver its Goods in Eugene, Oregon;
NOW THEREFORE, in consideration of a sum agreed to by the Parties, the Contractor agrees to sell and deliver the Goods as described in this Contract, in accordance with all requirements, terms and conditions of this Contract, as set forth below:
DEFINITIONS
“Acceptance” - Goods furnished under this Contract shall be subject to inspection and testing by EWEB at delivery point, or as otherwise stated in the Contract. If EWEB determines that Goods conform in accordance with the Contract Specifications, then EWEB shall notify Contractor that “Acceptance” of the Goods has occurred.
“Contract” or “Contracts” means the Written agreement(s), resulting from the Solicitation Document that sets forth the rights and obligations of the parties.
“Contractor” means the Person with whom EWEB enters into a Contract.
“Goods” includes products that have associated or incidental service components, such as supplier warranty obligations or maintenance service programs. (See ORS 279B.115(1))
"Person" means a natural person capable of being legally bound, a sole proprietorship, a corporation, a partnership, a limited liability company or partnership, a limited partnership, a for-profit or nonprofit unincorporated association, a business trust, two or more persons having a joint or common economic interest, any other person with legal capacity to contract or a public body.
“Rule” means a Rule within the EWEB Public Contracting Rules.
“Services” under this Contract mean any action or work to be performed by the Contractor in the provision of the Goods required under the Contract.
“Specifications” under this Contract sets forth the required design and minimum level of quality of the Goods furnished by Contractor under this Contract.
"Work" means the furnishing of all materials, equipment, labor, and incidentals necessary to successfully complete any individual item or the entire Contract and successful completion of all duties and obligations imposed by the Contract.
“Working hours” means EWEB’s regular business hours, which currently are Monday through Friday, 9 a.m. to 5 p.m., excluding EWEB recognized holidays.
All other terms not expressly identified in the Contract shall have the meanings as set forth in EWEB Public Contracting Rules, Division 1 - Definitions.
ARTICLES
HEADINGS: The section (“Section” or “Article”) headings in this Contract are included for convenience only; they do not give full notice of any portion of the terms of this Contract.
CONTRACT COMMENCEMENT
1. Effective Date and Duration
a. This Contract shall become effective on the date this Contract has been signed by every party hereto and, when executed by EWEB's Purchasing Supervisor (“Execution”). Unless terminated in accordance with the early termination provisions in Section 12, this Agreement will expire on _____________, 202_. Expiration shall not extinguish or prejudice EWEB’s right to enforce this Contract with respect to any breach of a Contractor warranty or any default or defect in Goods that has not been cured.
b. This Agreement may be renewed for additional period(s), in accordance with EWEB Rule 3-0850, Contract Amendments, subject to agreement by the Parties prior to the expiration of the current term. The maximum term for this Agreement shall not exceed five (5) years.
PRICING AND PAYMENT
2. Contract Compensation
The compensation payable to Contractor under this Contract, INCLUDING FREIGHT, transportation and handling charges, and any allowable expenses, is $XXXXXXXX, as detailed in Attachment A.
Pricing and Payment
3. Invoicing and Payment
a. Interim payments to Contractor shall be made according to the following payment schedule:
Progress Payments:
Upon Receipt of PO
10% Drawing submission
30% Shipment Received at EWEB Site
50%
Upon EWEB’s Final Acceptance
10%
The final 10% payment will be made after product successfully passes an inspection at the delivery location and is found to be in full compliance with the specifications of the Contract. Product must be Accepted per Section 9 On-Time Delivery/Initial Acceptance and invoiced before final payment will be made.
Payment Submission: Invoices shall be submitted to EWEB's Contract Administrator and accountspayable@eweb.org for this Contract. EWEB's Contract Administrator is XXXXX.
Payment Terms: EWEB will make payment in accordance with its regular payment schedule: Net 30 days from receipt of a valid, undisputed invoice.
Cash Discount: If EWEB is entitled to a cash discount, the period of computation shall start on the date the entire order is delivered or the date the invoice is received, whichever is later.
b. Payment for undisputed amounts will be made upon receipt of an invoice and after product successfully passes an inspection at the delivery location and is in full compliance with the Specifications of the solicitation, including manuals, data sheets, or any other required component.
4. Reserved
SPECIFICATIONS / REQUIREMENTS
5. Schedule of Goods
An overview of the Goods required is contained in Attachment A - Schedule of Goods, attached and incorporated by reference into this Contract.
6. Specifications Contractor shall deliver all Goods and Services specified under the Contract in accordance with the Specifications contained in Attachment A – Schedule of Goods. Contractor’s failure to deliver Goods in accordance with the provisions of this Contract is a material breach of this Contract.
a. General provisions.
i. Standard Components. Unless specified otherwise in this Section, Contractor shall provide Goods with all components and accessories that the manufacturer lists as “standard” for Goods.
ii. Necessary Components. Unless specified otherwise in this Section, Contractor shall include all components, hardware and parts necessary for complete and proper assembly, installation and operation of Goods.
iii. New and Unused Goods. Unless specified otherwise in this Section, Contractor shall deliver Goods that are new, unused and produced from current production inventory. Contractor shall provide Goods manufactured from only those components that the manufacturer offers in the manufacturer’s current parts catalogue for Goods.
b. Detailed Specifications.
All Goods furnished under the resulting Contract shall comply with the applicable attached material specification contained in Attachment A – Schedule of Goods.
7. Addition/Deletion and Product Substitution of Goods Any substitution(s) for originally contracted item(s) must have the approval of EWEB prior to any substitution. If approved by EWEB, the substituted item(s) must be offered to EWEB at no increase in cost and the quality cannot be less than the originally contracted item. Contractor shall be responsible for securing all approvals and, with the exception of storage, will also be responsible for all charges such as freight, labor, etc., which accrue to any shipments of unauthorized substituted material. EWEB will not be responsible to pay for shipments of unauthorized product.
8. Purchase Order Cancellations
If EWEB cancels a purchase order under this Contract, the payment terms are as follows:
· 0% of order up to 30 calendar days after order entry by Contractor
· 15 % of order amount after 30 calendar days after order entry by Contractor
· Additional 10 % of order amount after outline drawing completion / submission
· If manufacturing has begun, charges will be based upon submitted documentation of commitments for materials and percent completion in addition to the charges for engineering and order entry.
Contractor will have no further liability to EWEB for cancelled purchase order and Contractor will not be liable for any costs of cancellation, special, incidental or consequential damages (including punitive or exemplary damages) for any cause or of any nature whatsoever.
PERFORMANCE
9. On-Time Delivery /Initial Acceptance
a. All Goods shall be received by the Required Date specified on each purchase order issued. Additional detail regarding delivery is provided in Attachment A - Schedule of Goods.
b. All deliveries shall be F.O.B. destination with all transportation and handling charges paid by Contractor, unless specified otherwise in the Contract. Responsibility and liability for loss or damage shall remain with Contractor until EWEB conducts an Initial Inspection of received Goods for shipment damage, which will be conducted within 24 hours of receipt, although EWEB will do its best to complete inspection the same day depending on how late in the day the Goods are received at EWEB. Initial Acceptance by EWEB in writing (including email) shall be provided to Contractor, at which point EWEB shall assume responsibility and liability for loss or damage. Contractor will then re-assume responsibility and liability for loss or damage once Contractor is at EWEB’s site, to perform field work for Final Inspection of the Goods.
c. Time is of material importance in the performance of this Contract. Contractor shall deliver within the time indicated on the purchase order issued by EWEB. If Contractor fails to deliver on-time, Contract will become subject to Notice to Cure per Section 11 below.
10. Inspections / Final Acceptance Inspections - Goods furnished under this Contract shall be subject to Final Inspection and testing by EWEB within thirty (30) calendar days from time of receipt. If EWEB does not deliver written notice of Final Acceptance or Notice to Cure within 45 days of delivery, Goods shall be deemed as Accepted.
Final Acceptance - If EWEB determines that Goods conform in accordance with the Contract Specifications, then EWEB shall promptly notify Contractor that Final Acceptance of the Goods has occurred or, if the Goods are found to be incomplete and/or not in compliance with Contract requirements and Specifications, that Non-Acceptance/Rejection of the Goods has occurred. Next steps are stated in Section 11 Deficiencies and Remedies.
11. Deficiencies and Remedies
Deficiencies - If EWEB determines that any Goods are not Acceptable and that any deficiencies are the responsibility of the Contractor, EWEB, at its sole discretion, reserves the right to Reject all or part of the shipment and issue a Notice to Cure and require Contractor to correct any defects without charge. If EWEB elects to allow Contractor opportunity to correct deficiencies, EWEB shall prepare a detailed Notice to Cure, including a written description of such deficiencies and an associated, reasonable and realistic time frame for correction (after conferring with Contractor) and deliver such formal notice to Contractor. Upon receipt of such written notice, Contractor will correct any such failures within the timeframe EWEB specified in its a notice and shall re-deliver the Goods to EWEB for re-inspection, all at no additional charge to EWEB. Until EWEB issues Final Acceptance for Goods, Contractor is responsible for any and all costs associated with correcting Goods that are not built in compliance with the requirements of this Contract and its Specifications, including all freight charges incurred for the return and re-shipment of deficient Goods. Rejection that requires return to factory for remediation will only be done upon mutual agreement post-delivery. If Goods are not returned to factory for remediation, Contractor will repair at Eugene, OR location at Contractor’s sole expense.
Contractor Cures Defects - If EWEB determines that Goods conform in accordance with the Specifications, then EWEB shall notify Contractor in writing that Final Acceptance of the Goods has occurred.
Contractor Failure to Cure Defects - If the Goods still fail to conform as required, EWEB reserves the right to allow Contractor additional opportunities to correct the Goods, again at no additional charge to EWEB. If Contractor is ultimately unable to cure any defects within the time set forth in its most recent formal Notice to Cure OR within 18 months from date of delivery to EWEB site, EWEB may elect to Reject the Goods and Contractor shall issue an invoice reversing all charges associated with the Goods and their delivery. EWEB will return defective Goods at Contractor’s request, entirely at Contractor’s cost for transport. Upon such rejection of Goods, EWEB will have the option to cancel the Contract for failure to perform, per Section 13 Early Termination.
c.
Nothing in this paragraph shall in any way affect or limit EWEB's rights as buyer under the UCC, including the rights and remedies relating to Rejection under ORS 72.6020 and revocation of acceptance under ORS 72.6080.
12. Warranties
Timing of Warranty - Once Contractor receives written notice from EWEB of Final Acceptance or initial energization of unit, (whichever is agreed upon by the parties), Contractor’s warranty shall cover any discoverable deficiencies within the warranty period indicated in the Warranty document (Attachment D).
Coverages - Contractor’s “Warranty” is attached as Attachment D. Unless otherwise stated, all Goods shall be free and clear of any liens or encumbrances and shall be new (and, if applicable, the current model) and shall carry full manufacturer warranties that meet the requirements in the Contract specifications and/or Attachment A – Schedule of Goods. Contractor warrants all Goods delivered to be free from defects in labor, material and manufacture and to be in compliance with the Specifications set out in this Contract. All implied and express warranty provisions of the UCC, as adopted in Oregon, are hereby incorporated by reference.
EARLY TERMINATION
13. Early Termination
This Contract may be terminated as follows:
a. Termination for Convenience
1.
EWEB and Contractor, by mutual written agreement, may terminate this Contract at any time.
2.
EWEB in its sole discretion may terminate this Contract for any reason on 30 days written notice to Contractor.
b. EWEB Termination for Cause
1. EWEB Non-Appropriation of Funds - If payment for Goods purchased under this Contract extends into EWEB’s next fiscal year, EWEB’s obligation to pay for such Deliverables is subject to approval of future appropriations to fund this Contract by the EWEB Board of Commissioners. If EWEB fails to receive funding, appropriations, limitations or other expenditure authority at levels sufficient to pay for Contractor’s Work, EWEB shall terminate the Contract immediately.
2. Regulatory Changes - EWEB may terminate this Contract if Federal or state laws, regulations or guidelines are modified or interpreted in such a way that either the Work under this Contract is prohibited or EWEB is prohibited from paying for such Work from the planned funding source. Termination shall take effect on the date the law, regulation or guidelines takes effect, or with 30 days written notice, whichever comes first.
3. Contractor Loss of Licensure – EWEB may terminate this Contract, without liability to Contractor and per Section 14.b, immediately if Contractor no longer holds an applicable license or certificate required to deliver the Goods required by the Contract.
4. Contractor Breach of Contract - EWEB may terminate this Contract, without liability to Contractor and per Section 14.c, if Contractor commits any material breach or default of any covenant, warranty, obligation or agreement under this Contract, fails to perform the Work under this Contract within the time specified herein or any extension thereof, or so fails to pursue the Work as to endanger Contractor's performance under this Contract in accordance with its terms, and such breach, default or failure is not cured within the time specified in the Notice to Cure issued by EWEB and Contractor fails to provide material evidence of diligently pursuing Cure Accepted by EWEB and in no event to exceed 90 days from most recent Notice to Cure.
Late delivery shall be an Event of Default if Contractor fails to deliver Goods by the most recently agreed upon delivery date per formal Notice to Cure.
If Contractor fails to cure the breach or default, EWEB will have the option to formally terminate the Contractor on the date specified in a separate Notice of Contract Termination issued by EWEB.
In the case of EWEB termination for convenience or cause, EWEB shall not be liable for direct, indirect, special, or consequential damages. Termination shall not result in a waiver of any other claim the parties may have against the other.
c. Contractor’s Right to Terminate for Cause
1. EWEB Non-payment - Contractor may terminate the Contract within 15 calendar days after receipt of Contractor’s notice, or such longer period of cure as Contractor may specify in its notice, if EWEB fails to pay Contractor under a formally issued purchase order for Accepted Goods pursuant to the terms of this Contract.
2. EWEB Material Breach of Contract - Contractor may terminate this Contract, for reasons other than nonpayment, if:
· EWEB commits any material breach or default of any covenant, warranty, obligation or agreement under this Contract,
· EWEB is adjudicated bankrupt or files a petition in bankruptcy,
· EWEB makes an assignment for the benefit of creditors or if action under any law for the relief of debtors is taken,
· EWEB fails to perform under the Contract within the times specified or so fails to perform as to substantially endanger Contractor's performance under this Contract, AND such breach, default or failure is not cured within 15 business days after delivery of Contractor's Notice to Cure, or such longer period as Contractor may specify in such notice, whichever is the longer period.
In the event of cancellation and termination of this order for breach of the provisions hereof by EWEB, Contractor shall not be liable for any costs of cancellation, special, incidental or consequential damages (including punitive or exemplary damages) EXCEPT that termination or expiration of this Contract does not extinguish or prejudice EWEB’s right to enforce any other claim EWEB may have against Contractor, its access to records, to enforce indemnification, governing law, and remedies provisions contained within this Contract, its attachments, exhibits, and any and all subsequent Addenda or amendments per Section 40 Survival.
14. Payment Upon Early Termination
Upon termination pursuant to Section 13, payment shall be made as follows:
a. If terminated for any reason, other than Sections 13.b.3 and 13.b.4, EWEB shall be subject to the following termination charges:
· 0% of order up to 30 calendar days after order entry by Contractor
· 15 % of order amount after 30 calendar days after order entry by Contractor
· Additional 10 % of order amount after outline drawing completion / submission.
· If manufacturing has begun, charges will be based upon submitted documentation of commitments for materials and percent completion in addition to the charges for engineering and order entry.
b.
Contractor Loss of Licensure - Per Section 13.b.3, if EWEB terminates this Contract for Contractor’s loss of licensure, EWEB’s liability to Contractor for unfinished purchase orders will terminate immediately, and Contractor shall issue an invoice reversing all charges associated with the Goods and their delivery.
c.
Contractor Breach of Contract – Per Section 13.b.4, if EWEB terminates this Contract for breach, EWEB’s liability to Contractor for unfinished purchase orders will terminate immediately, and Contractor shall issue an invoice reversing all invoiced charges associated with the Goods and their delivery. EWEB will return any defective Goods at Contractor’s request, entirely at Contractor’s cost for transport.
RISK
15. Insurance Contractor shall provide certificates of insurance as described below. No work under this Contract shall commence until all insurance requirements have been met.
a. Certificates of Insurance. As evidence of the insurance coverage required by this Contract, the Contractor shall furnish certificate(s) of insurance to the EWEB Purchasing Department, before final award can be authorized and must list the Contract number in the “Description of Operations” section. The insurance coverage required under this Contract shall be obtained from insurance companies or entities having a minimum financial rating of A.M. Best’s Key Rating A-; VII or higher. The Contractor shall be financially responsible for all deductibles, self-insured retention and/or self-insurance included hereunder.
Contractor shall ensure Contractor’s subcontractors procure the same types/categories of insurance as required for Contractor; limits shall be commensurate with each subcontractor’s scope of work.
b. Commercial General Liability. Contractor shall obtain, at Contractor's expense, and keep in effect during the term of this Contract, Commercial General Liability Insurance written on the current ISO occurrence form (or a substitute form providing equivalent coverage) including coverage for premises, operations, independent contractors (performing Work on Contractor’s behalf), completed operations and contractual liability. The limit shall not be less than $1,000,000 per occurrence and subject to an aggregate limit of no less than $2,000,000.
The insurance must include EWEB, its' divisions, officers, and employees as additional insureds and must apply as primary insurance without any contribution from any other insurance or self-insurance afforded to such additional insured. There must not be any endorsement or modification of this insurance to make it excess over any other insurance available to such additional insured. Insurance or self-insurance maintained by EWEB or other additional insureds is in excess of Contractor’s insurance, contingent and non-contributory.
The insurance must include a waiver of subrogation in favor of EWEB, its' divisions, officers, and employees.
c. Automobile Liability. Contractor shall obtain, at Contractor's expense, and keep in effect during the term of this Contract, Automobile Liability Insurance to cover liability arising out of any auto (including owned, hired and non-owned) used in connection with the Work or Services. This coverage may be written in combination with the Commercial General Liability Insurance. Combined single limit per occurrence shall not be less than $1,000,000, or the equivalent.
The insurance must include EWEB, its' divisions, officers, and employees as additional insureds and must apply as primary insurance without any contribution from any other insurance or self-insurance afforded to such additional insured. There must not be any endorsement or modification of this insurance to make it excess over any other insurance available to such additional insured. Insurance or self-insurance maintained by EWEB or other additional insureds is in excess of Contractor’s insurance, contingent and non-contributory.
The insurance must include a waiver of subrogation in favor of EWEB, its' divisions, officers, and employees.
d. Workers' Compensation. All subject employers working under this Contract are either employers that will comply with ORS 656.017 which requires them to provide Oregon workers' compensation coverage that satisfies Oregon law for all their subject workers, or employers that are exempt under ORS 656.126. [2003 c.794 §76c] In addition, Contractor will obtain, at Contractor's expense, and keep in effect during the term of this Contract, Employers Liability insurance with a limit of not less than $1,000,000 each accident for bodily injury by accident, $1,000,000 each employee for bodily injury by disease, and a $1,000,000 policy limit for bodily injury by disease.
The insurance must include a waiver of subrogation in favor of EWEB, its' divisions, officers, and employees.
e. Notice of Cancellation or Change. There shall be no cancellation, material change, potential exhaustion of aggregate limits or non-renewal of insurance coverage(s) without 30 days' written notice from Contractor or its insurer(s) to EWEB.
Failure to Maintain Insurance - If at any time Contractor fails to maintain insurance complying with the requirements reflected herein, in full force and effect, they shall be responsible for any resulting losses or costs sustained by EWEB and shall hold EWEB harmless from actions brought against Contractor as the result of the absence of the required insurance, and (ii) EWEB shall not be required but may elect to do any of the following: (A) immediately suspend all or a portion of the Work and be entitled to an equitable adjustment in the price, schedule and other terms of the Contract for the impact of the suspension (B) pay premiums or purchase alternate insurance at the Contractor’s expense; or (C) pursue such other remedies as may be allowed by law.
Failure to Comply - Any failure to comply with the reporting provisions of this clause shall constitute a material breach of Contract and shall be grounds for immediate termination of this Contract by EWEB.
f. Reserved
g. Waiver of Insurance Requirements
Contractor’s failure to provide certificates of insurance as specified herein and/or in the manner specified herein does not constitute a waiver of the insurance requirements. Any waiver of the insurance requirements will only be made in writing.
16. Force Majeure
Unless this Contract is executed to remedy an act(s), occurrence(s), or event(s) stated herein, neither Party shall be liable for delays in the execution of its obligations due to causes beyond its reasonable control, including, but not limited to acts of God, fires, strikes, labor disturbances, floods, earthquakes, epidemics or pandemics formally declared by state or federal government resulting in quarantines and/or restrictions, war, insurrection or riot, acts of a civil or military authority, compliance with priority orders or preference ratings issued by the federal Government, acts of Government authorities with respect to revocation of export or re-export permits/licenses, wrecks, or unusually severe weather. The parties shall, however, make all reasonable efforts to remove or eliminate such cause of delay or default and shall, upon the cessation of the cause, diligently pursue performance of their obligations under this Contract.
In the event of any such delay, the required date of services will be extended for a period of time equal to the period of the delay, or as short a period as is reasonably possible.
EWEB may terminate this Contract immediately upon written notice after reasonably determining that such delay or default will prevent successful performance of the Services provided under this Contract due to quality or timing issues. Payment is subject to Section 14- Payment Upon Early Termination.
17. Indemnification. Contractor shall defend, save, hold harmless, and indemnify EWEB, its officers, employees and agents from and against all claims, suits, actions, losses, damages, liabilities, costs and expenses by either Consultant or any third parties resulting from, arising out of, or relating to any error, omission, breach of contractual duty, or negligent act of the Contractor or its officers, employees, subcontractors, or agents in the performance of services under this Contract.
SUSTAINABILITY
18. Sustainability
EWEB requires suppliers to comply with EWEB’s Sustainable Purchasing Policy and to implement the following strategies where applicable:
· EWEB aims to prevent waste where possible. Unnecessary packaging should be eliminated and required packaging should be reusable and/or made with recycled content, bio-degradable, and/or non-toxic materials.
· Fuel reduction strategies shall be implemented including efficiencies in shipping techniques, increasing manufacturing efficiencies over time, and reducing the use of idling vehicles. Where the supplier is not in compliance with our Policy, disclosure is required.
· EWEB requests vendors use environmentally preferable products wherever practical. Characteristics of environmentally preferable products include recyclable, energy efficient, non-toxic, and/or certified by an independent accredited third-party program such as EcoLogo or Energy Star.
· EWEB supports the use of Minority, Women, Emerging Small Businesses (M/W/ESB), local businesses, Disadvantaged Business Enterprises and Qualified Rehabilitation Facilities (QRF) at both a prime and subcontracting and/or supply chain level. EWEB encourages the awarded offeror to use the following voluntary practices to promote open competitive opportunities for disadvantaged businesses as applicable.
19. Recyclable Products
Contractor shall use recycled and recyclable products to the maximum extent economically feasible in the performance of the Contract Work set forth in this document. Contractor shall specify the minimum percentage of recycled product in the Goods provided under this Contract. Contractor agrees to abide by all covenants contained in ORS 279B.270, which is incorporated by reference.
EMPLOYEES AND SUBCONTRACTORS
20. Anti-Discrimination Contractor shall not discriminate based on race, religion, color, sex, marital status, familial status, national origin, age, mental or physical disability, sexual orientation, source of income, or political affiliation in programs, activities, services, benefits or employment. Contractor shall not discriminate against minority-owned, women-owned or emerging small businesses.
21. Equal Opportunity Employer EWEB is an Equal Employment Opportunity and Affirmative Action employer and requires contractors and their subcontractors to follow EEO/AA practices in their performance of this Contract.
22. Hours of Labor Contractor shall pay employees for overtime work performed under the public contract in accordance with ORS 653.010 to 653.261 and the Fair Labor Standards Act of 1938 (29 U.S.C. 201 et seq.).
23. Safety and Health Requirements General Requirements - Contractor warrants Goods provided under this Contract comply with all applicable federal Occupational Safety and Health Administration (OSHA) requirements and with all applicable Oregon safety and health requirements, including those of the Oregon State Workers' Compensation Division.
The Contractor shall comply with all federal, state, and local safety and health regulations and laws including, but not limited to, the following:
· Department of Labor and Industries regulations and laws
· United States Department of Labor Law - 29 CFR 1910 and 29 CFR 1926 – Occupational Safety & Health Administration
Protection of Workers - Contractor shall take all necessary precautions for the safety of Contractor employees, subcontractors, suppliers, inspectors, and Owner employees on the job site or otherwise engaged in the undertaking of the Work and shall comply with the Contract Documents, best practices, and all applicable provisions of federal, state, and municipal safety laws and building codes to prevent accidents or injury to persons on, about, or adjacent to the premises where the Work is being performed. Contractor shall erect and properly maintain at all times, as required by the conditions and progress of the Work, all necessary safeguards for protection of workers and the public against any hazards created by the Work.
Chemical Hazards - Products which contain hazardous chemicals, as defined by Oregon Administrative Rules Chapter 437, must be labeled, tagged or marked with the following information:
1) Identity of the hazardous chemical(s);
2) Appropriate hazard warning; and
3 ) Name and address of the chemical manufacturer, importer or other responsible party.
Contractor shall provide EWEB with a Safety Data Sheet (SDS) as defined by the Occupational Safety and Health Administration (OSHA) for any Goods provided under this Contract, which may release, or otherwise result in exposure to a hazardous chemical under normal conditions of use. In addition, Contractor must label, tag or mark such Goods. The Contractor shall keep Safety Data Sheets (SDS) on file at the location where such chemicals are stored, as required by OAR 437-155-025, for the products listed above.
24. Tobacco Free Workplace EWEB campuses, worksites, vehicles, and equipment (known collectively as “EWEB Campus”), are smoke-free. Contractors and their staff may not use or distribute tobacco products in any EWEB Campus, nor can they inhale, exhale, burn, or carry any lighted smoking material or vapor. Contractors and staff must extinguish or cease use prior to entering any EWEB campus and must dispose of tobacco products appropriately prior to entry. Improper disposal includes littering, spitting smokeless tobacco, or any measure which creates a fire or hazard or could disrupt the campus or worksite.
25. EWEB Payment of Contractor Claims
a. Contractor shall make payment promptly, as due, to all persons supplying Contractor labor, equipment or material for Work under this Contract; pay all contributions or amounts due the Industrial Accident Fund from Contractor or any subcontractor incurred in the performance of the Contract; not permit any lien or claim to be filed or prosecuted against EWEB on account of any labor or material furnished; and pay to the Department of Revenue all sums withheld from employees pursuant to ORS 279B.220.
b. If Contractor fails, neglects or refuses to make prompt payment of any claim for labor or services furnished to Contractor or a subcontractor by any person in connection with this Contract as such claim becomes due, EWEB may, but is not obligated to pay such claim to the person furnishing the labor or services and charge the amount of the payment against funds due or to become due Contractor by reason of this Contract. The payment of a claim under this Section shall not relieve Contractor or Contractor’s surety from any obligation with respect to any unpaid claims. ORS 279B.220.
26. Payment for Medical Care Contractor agrees to make payment promptly, as due, to any person, co-partnership, association or corporation furnishing medical, surgical, hospital or other needed medical care to Contractor’s employees. Such payment shall be made from all sums which Contractor has agreed to pay for such services and from all sums which Contractor has collected or deducted from the wage of employees pursuant to any law, contract or agreement for the purpose of providing or paying for such services.
All subject employers working under this contract are either employers that will comply with ORS 656.017 or employers that are exempt under ORS 656.126. [2003 c.794 §76c] .
INDEPENDENT CONTRACTOR
27. Independent Contractor / Responsibility for Taxes and Withholding
a. Any service or provision of Goods by Contractor under this Contract are those of an independent contractor. Contractor certifies its status as an independent contractor in satisfaction of Oregon law, including ORS 670.600, and shall perform all required Work as an independent contractor. EWEB holds the right (i) to determine the delivery schedule for the Work to be performed and (ii) to evaluate the quality of the completed performance, but EWEB cannot and will not control the means or manner of Contractor’s performance. Contractor is responsible for determining the appropriate means and manner of performing the Work.
b. The parties covenant that Contractor, its subcontractors, Agents, Officers and Representatives do not qualify as officers, employees, or agents of EWEB as those terms are used in ORS 30.265 nor shall they seek such qualification relating to performance of the Work.
c. Contractor agrees it is responsible for all federal and state taxes or other payments or withholdings applicable to compensation or payments paid to Consultant under this Contract and shall hold EWEB harmless from such financial exposures.
ADMINISTRATION OF CONTRACT AND RECORDS
28. Access to Records Contractor shall maintain fiscal records and all other records pertinent to this Contract. Records shall be maintained pursuant to generally accepted accounting standards, and other records shall be maintained to the extent necessary to clearly reflect actions taken in the provision of the products required herein. All such records shall be retained and kept accessible for at least three years following final payment. EWEB’s authorized representatives shall have the right to direct access to documents, papers and records related to this Contract for the purpose of conducting audits and examinations and making copies, excerpts and transcripts. EWEB shall reimburse Contractor for Contractor’s cost of preparing copies.
29. Reserved
30. Publicity Any publicity giving reference to this solicitation, whether in the form of press releases, brochures, photographic coverage, or verbal announcement, shall be done only after prior approval of EWEB.
The use of media that is intended to identify Contractor as “EWEB” or “EWEB Contractor”, including but not limited to vehicle magnets, decals, clothing, and other signage, is strictly prohibited unless previously authorized by EWEB. If authorized, Contractor is required to keep all such media in a secure location to deter theft.
31. Survival
Termination or expiration of this Contract does not extinguish or prejudice EWEB’s right to enforce the access to records, indemnification, governing law, and remedies provisions contained within this Contact, its attachments, exhibits, and any and all subsequent Addenda or amendments.
32. Subcontracts and Assignment
Assignment by Contractor - Contractor shall not subcontract any of the Work required by this Contract or assign or transfer any of its interest in this Contract, without the prior written consent of EWEB. No such written approval shall relieve Contractor of any obligations under this Contract, and any transferee or subcontractor shall be considered the agent of Contractor. Contractor shall remain liable to EWEB under the Contract as if no such transfer or subcontract had occurred.
Assignment by EWEB - Except as otherwise expressly provided herein, no assignment of this order or EWEB’s rights under this order shall be made by EWEB without the prior written agreement of the Contractor. All amounts due to the Contractor must be paid to the Contractor before any assignments will be granted. In addition, EWEB must provide financial and other information as requested by the Contractor to support the ability of the assignee to pay future amounts that may become due. Contractor reserves the right to deny any request for assignment.
33. Successors in Interest The provisions of this Contract shall be binding upon and inure to the benefit of the parties and their successors and approved assigns, if any.
34. No Third-Party Beneficiaries EWEB and Contractor are the only parties to this Contract and are the only parties entitled to enforce its terms. Nothing in this Contract gives or provides any benefit or right, whether directly, indirectly, or otherwise, to third persons unless such third persons are individually identified by name herein and expressly described as intended beneficiaries of the terms of this Contract.
35. Compliance with Applicable Law
Contractor shall comply with all federal, state, and local laws applicable to the Work under this Contract, and all regulations and administrative rules established pursuant to those laws. EWEB represents and warrants that its specifications comply with all applicable Standards and Codes, laws, ordinances and regulations.
Contractor shall maintain in effect all licenses, permits and certifications required for the performance of the Work. Contractor shall notify EWEB immediately if any license, permit, or certification required for performance of this Contract ceases to be in effect for any reason.
36. Governing Law The provisions of this Contract shall be construed in accordance with the laws of the State of Oregon and ordinances of Lane County, Oregon. Any legal action involving any question arising under this Contract must be brought in Lane County, Oregon. If the claim must be brought in a federal forum, then it shall be brought and conducted in the United States District Court for the District of Oregon.
REGULATORY COMPLIANCE
37. Severability If any term or provision of this Contract is declared by a court of competent jurisdiction to be illegal or in conflict with any law, the validity of the remaining terms and provisions shall not be affected, and the rights and obligations of the parties shall be construed and enforced as if the Contract did not contain the particular term or provision held invalid.
38. Waiver Waiver of any default under this Contract by EWEB shall not be deemed to be a waiver of any subsequent default or a modification of the provisions of this Contract.
39. Uniform Commercial Code (UCC) Except as otherwise provided herein, the Uniform Commercial Code (UCC), as adopted in Oregon shall apply to this Contract.
40. Taxes EWEB is a tax-exempt municipal corporation.
TIN #93-6001483; Tax exempt #93-880393K.
41. Reserved
42. Cooperative Purchasing Other public agencies may utilize the results of this solicitation in accordance with ORS 279A.215 and Rule
2-0210. If utilized, EWEB assumes no liability or responsibilities for the actions of the utilizing parties, or as may pertain to the resulting Contract established by and between the utilizing agency and the Contractor. The utilizing agency and the Contractor assume full responsibility for any and all agreements established between the parties.
CONTACT INFORMATION
43. Contractor Contacts
Contractor shall designate all key persons responsible for Contractor's Work under this Contract. Contractor shall provide EWEB the names, addresses and telephone numbers of such persons and shall keep this information current at all times. The primary representative shall be thoroughly familiar with the terms of the Contract and shall have the technical knowledge to perform the Work.
Account Representative:
Day to Day Contact:
Accounts Receivable Contact:
44. EWEB Contacts
Following are EWEB's contacts for this Contract:
Contract Administrator:
Accounts Payable: accountspayable@eweb.org
Purchasing Contact: Sandra Hahn, 541-685-7163, Sandra.hahn@eweb.org
45. Notices
Except as otherwise expressly provided in this Contract, any communications between the parties hereto or notices to be given hereunder shall be given in writing by personal delivery, email, U.S. Postal Service, or commercial delivery service to Contractor or EWEB at the address or email set forth on the signature page of this Contract, or to such other addresses or emails as either party may hereafter indicate pursuant to this Section. Any communication or notice so addressed and mailed, other than email, shall be deemed to be given five (5) days after mailing. Any communication or notice delivered by email shall be deemed to be given within one (1) hour after being sent/transmitted. Any communication or notice by personal delivery shall be deemed to be given when actually delivered.
CONTRACT ACKNOWLEDGEMENTS AND EXECUTION
46. Contract Documents
This Contract consists of the following documents, hereby incorporated by reference, which are listed in descending order of precedence: this Contract less all attachments and exhibits, Attachment A - Schedule of Goods.
This Contract and the attached attachments and exhibits constitute the entire agreement between the parties. All understandings and agreements between the parties and representations by either party concerning this Contract are contained in this Contract. No waiver, consent, modification or change in the terms of this Contract shall bind either party unless in writing signed by both parties. Any written waiver, consent, modification or change shall be effective only in the specific instance and for the specific purpose given.
47. Assurances:
· The undersigned represents and warrants to EWEB that they have the power and authority to enter into and perform this Contract and that this Contract, when executed by EWEB, shall be a valid and binding obligation of Consultant enforceable in accordance with its terms.
· By signing this Contract, Contractor agrees that, in the event of a conflict, all the terms and conditions of this Contract supersedes all preprinted terms and conditions on any forms used by the Contractor.
· Contractor, by signing this Contract, represents and warrants that Contractor’s performance under this Contract creates no potential or actual conflict of interest, including but not limited to conflicts of interest as defined in ORS 244.020. Contractor further warrants that no state or federal law or EWEB Rule prevents Contractor's lawful performance of the Contract. If Contractor is currently performing Work for EWEB or another governmental entity, Contractor’s participation in other public contracts does not create a potential or actual conflict of interest in performance of this Contract.
· Contractor shall, at all times during the term of this Contract, be duly licensed to perform the Work, and if there is no licensing requirement for the profession or Work, be duly qualified and professionally competent.
· Contractor understands that the Owner is an Equal Employment Opportunity and Affirmative Action employer and requires Contractors and their sub-Contractors to follow EEO/AA practices in their performance of a Contract with EWEB.
48. CONTRACT EXECUTION
CONTRACTOR, BY EXECUTION OF THIS CONTRACT, HEREBY ACKNOWLEDGES THAT CONTRACTOR HAS READ THIS CONTRACT, UNDERSTANDS IT, AND AGREES TO BE BOUND BY ITS TERMS AND CONDITIONS.
CONTRACTOR:
Company Name
Company Address
Telephone Number Fax Number
FEDERAL ID NUMBER
Email Address: ______________________________________________________________________
_______________________________________________________Title___________________________
Person Signing Contract (Please print or type Name)
Signature: _____________________________________________________________________________
EXECUTION
EWEB:
Contract Administrator – XXXXXX Date
Email Address: __________________________________________________________________________
Manager – XXXXXXX Date
Purchasing Supervisor – XXXXXX Date of Execution
ATTACHMENT A SCHEDULE OF GOODS
a. Project Title: 50 MVA TRANSFORMER FOR CARMEN-SMITH
b. EWEB Project Manager:
c. Contractor Order Manager:
d. Contractor Regional Sales Manager:
e. Location of Factory:
f. Not-to-Exceed Date of Contract:
g. EWEB Delivery Site: Goods shall be delivered to:
Roosevelt Operations Center 4200 Roosevelt Blvd.
Eugene, OR 97402
h. Lead Time / Guaranteed Delivery Transformer will be delivered to EWEB destination no later than XXXXXXX
Guaranteed Lead Time: Maximum of XXX days AFTER RECEIPT OF ORDER (ARO)
i. Background / Objectives The Contractor is responsible for constructing and providing the required transformer in accordance with the specification.
The Contractor is responsible for shipping and handling of unit to the Carmen load bank station site in Eugene, Oregon via FOB DESTINATION, offloading unit onto the transformer foundation in the load bank station, assembly, and field testing of the transformer on the transformer foundation. The load bank station site is adjacent to the Carmen-Smith hydroelectric project office, located at 59727 McKenzie Hwy. 126, McKenzie Bridge, OR 97413.
j. Coordination
Contract activity coordination shall be through EWEB Engineering, including drawing submittal and review, shipping scheduling, submittals during manufacture, witness testing scheduling, and shipping coordination. Contractor will be given the name and phone number of the Engineering contact person at the time of the award of the Contract.
EWEB Engineering shall be notified a minimum of 14 calendar days before the start of factory testing to allow time for EWEB Staff to arrange travel and attend portions or all this testing.
EWEB Engineering shall be notified a minimum of 14 calendar days before delivery day to allow time for coordination with EWEB Staff to be present for delivery.
k. Drawings
Drawings are typically supplied XXX to XXX (xx-xx) weeks after Order Acknowledgement. Actual Drawing lead time will be confirmed at the time of order Acknowledgement Only.
EWEB approval of drawings are required XXX week from date of submittal unless otherwise agreed to in writing by Contractor.
l. Specifications / Expected Deliverables All goods furnished under the resulting Contract shall comply with the applicable attached material specification shown in Attachment B – EWEB Specifications and Attachment C – Contractor Information. In the case of conflicting terms between any part of this Contract and Attachment C, EWEB’s terms will supersede.
Contractor is responsible for constructing and providing all goods in accordance with the specifications. Any deviations from the specifications provided in this Contract shall be requested by Contractor in writing and agreed to by EWEB in the form of an Amendment to this Contract. Any errors, confusion, or alterations in Contractor’s drawings that differ from the material specifications of this Contract shall NOT be considered accepted by EWEB, whether-or-not EWEB signs-off on the drawing, unless an Amendment acknowledging and accepting the change has been executed by EWEB.
Contractor is responsible for any and all costs associated with correcting goods that are not built in compliance with the requirements of this Contract, including all freight charges incurred for the return and re-shipment of deficient goods.
m. Contractor Testing
| Routine per IEEE |
| Included |
| Impulse Test on HV & LV |
| Included |
| Temperature Rise Test ONAN & ONAF or Test Report of Thermally Duplicate Design |
| Included – first unit of design only |
| Sound Level Test |
| Included |
| Power Factor |
| Included |
| Zero Sequence Impedance Test |
| Included |
| Dissolved Gas Analysis |
| Included |
n. EWEB Acceptance Tests
1. Upon…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .