The file's text, extracted by GovTribe without its formatting.
STORM II Performance Specification
W91CRB18R0002
STORM II HARDWARE SAMPLE EVALUATION MATRIX
Agency will evaluate the following performance specification paragraphs.
| Performance Specification Paragraph |
| Requirements |
| I - INSPECTION |
D - DEMONSTRATION
T- TEST
A - ANALYSIS
| 3.2 |
| Performance Requirements |
| 3.2.1 |
| Laser Rangefinder (LRF) Range Measurement |
| 3.2.1.1 |
| LRF Performance |
| A |
| 3.2.1.2 |
| LRF Capabilities |
| A |
| 3.2.1.3 |
| LRF Units of Measure |
| D |
| 3.2.1.4 |
| LRF Target Discrimination |
| T |
| 3.2.1.6 |
| LRF Ready State |
| D/T |
| 3.2.1.7 |
| LRF Range Update |
| D/T |
| 3.2.1.8 |
| LRF Laser Safety |
| A/T |
| 3.2.1.9 |
| LRF Beam Divergence |
| T |
| 3.2.1.10 |
| LRF System Boresight |
| T |
| 3.2.1.11 |
| LRF Output Wavelength |
| T |
| 3.2.1.12 |
| LRF Pulse Width |
| T |
| 3.2.1.13 |
| LRF Output Pulse Energy |
| T |
| 3.2.1.14 |
| SWIR Marking |
| D/T |
| 3.2.1.15 |
| SWIR Illumination |
| D/T |
| 3.2.2 |
| Visible Aiming Laser |
| A/D |
| 3.2.2.1 |
| Visible Aiming Laser Output Power |
| T |
| 3.2.2.2 |
| Visible Aiming Laser Beam Divergence |
| T |
| 3.2.2.3 |
| Visible Aiming Laser Output Wavelength |
| T |
| 3.2.2.4 |
| Visible Aiming Laser Safety |
| A/T |
| 3.2.3 |
| Near Infrared (NIR) Aiming Laser |
| A/D |
| 3.2.3.1 |
| NIR Aiming Laser Output Power |
| T |
| 3.2.3.2 |
| NIR Aiming Laser Beam Divergence |
| T |
| 3.2.3.3 |
| NIR Aiming Laser Output Wavelength |
| T |
| 3.2.3.4 |
| NIR Aiming Laser and NIR Illumination Laser Dual Mode Operation |
| T |
| 3.2.3.5 |
| NIR Aiming Laser Safety |
| A/T |
| 3.2.4 |
| NIR Illumination Laser |
| A/D |
| 3.2.4.1 |
| NIR Illumination Laser Output Power |
| T |
| 3.2.4.2 |
| NIR Illumination Laser Beam Divergence |
| T |
| 3.2.4.3 |
| NIR Illumination Laser Output Wavelength and Linewidth |
| T |
| 3.2.4.4 |
| NIR Illumination Laser Beam Uniformity |
| T |
| 3.2.4.5 |
| NIR Illumination Laser Safety |
| A/T |
| 3.2.6 |
| Signature reduction |
| 3.2.6.1 |
| Audible Detection |
| T |
| 3.2.6.2 |
| Optical Detection |
| T |
| 3.2.7.1 |
| Bore Sight Retention-Shock |
| T |
| 3.2.7.2 |
| Bore Sight Retention-Vibration |
| 3.2.7.3 |
| Bore Sight Repeatability |
| T |
| 3.2.7.4 |
| Bore Sight/Zero |
| D/T |
| 3.2.8 |
| Digital Magnetic Compass (DMC) Compass Vertical Angle Measurement (CVAM) |
| A |
| 3.2.9 |
| Controls, Indicators, Data Security |
| 3.2.9.1 |
| Alphanumeric Data Output Display |
| D |
| 3.2.9.2 |
| Ready and Charge |
| D |
| 3.2.9.3 |
| Laser Select Indicator |
| D |
| 3.2.9.4 |
| Fault Indicator |
| A/D |
| 3.2.9.5 |
| Low Battery Indicator |
| D |
| 3.2.9.6 |
| DMC Calibration Indicator |
| D |
| 3.2.9.8 |
| USB and RS-232 Data Input/Output (I/O) Serial Ports |
| D |
| 3.2.9.9 |
| Internal Data Protection and External SW/FW Updates |
| 3.2.10 |
| Data Busses and Controls |
| 3.2.10.1 |
| GPS Mode and Data Operation Using RS-232 Serial Data |
| 3.2.10.2 |
| STRYKER Armored Vehicle Operation Using RS-232 Serial Data |
| 3.2.10.3 |
| USB 2.0 Serial Data |
| 3.2.10.4 |
| UWB Wireless Serial Data |
| 3.2.10.5 |
| Clip-On Optic Serial Data |
| 3.2.10.6 |
| STORM II Switch, Button, Menu and Remote Controls |
| D |
| 3.2.10.7 |
| System Defaults |
| D |
| 3.2.11.1 |
| Battery Capacity |
| D/T |
| 3.2.11.2 |
| Internal Supply |
| A/D |
| 3.2.11.3 |
| External Power Supply |
| D |
| 3.2.11.4 |
| Sleep Mode and Shut Off Mode |
| D |
| 3.2.11.5 |
| Input/Output Port |
| D |
| 3.3 |
| Mounting/Interoperability |
| 3.3.1 |
| Mounting Interface |
| A/D |
| 3.3.2 |
| Attachment Mechanism |
| D |
| 3.3.4.1 |
| Ballistics Calculator |
| 3.3.4.2 |
| Top Side Case Iron Sight and Cross Wire Features |
| 3.4 |
| Environmental Requirements |
| 3.4.1 |
| Operating Temperature |
| 3.4.2 |
| Storage Temperature |
| 3.4.9 |
| Chemical, Biological, Radiological, and Nuclear (CBRN) Contamination Survivability |
| 3.4.11 |
| Vibration (Operational and Transportation) |
| 3.4.12 |
| Airborne and Air Assault Shock |
| 3.4.15 |
| Electromagnetic Compatibility Requirements |
| 3.4.16 |
| High Altitude Electromagnetic Pulse (HAEMP) |
| 3.4.17 |
| Chemical Compatibility |
| 3.4.18 |
| Electrostatic Discharge (ESD) |
| 3.4.18.1 |
| Personnel ESD (PESD) |
| 3.4.18.2 |
| Helicopter ESD (HESD) |
| 3.4.19 |
| Explosive Atmosphere |
| 3.5 |
| Design and Construction |
| 3.5.2 |
| Physical Characteristics |
| 3.5.3 |
| Component Parts |
| D/A |
| 3.5.5 |
| Support Equipment |
| D/A |
| 3.6 |
| Human Factors Engineering |
| 3.8.1 |
| Safety and Health Hazards |
| 3.8.4 |
| Manual Safety Lockout for High Power Operation of Visible Aiming Laser, NIR Aiming Laser, NIR Illumination Laser, and NIR Dual Mode |
| 3.8.6 |
| Laser Exit Port Covers |
| 3.10 |
| Recycled, Recovered, or Environmentally Preferable Materials |
| 3.11 |
| Transportation and Delivery |
