W912WJ20R0005-00004.pdf

W912WJ20R0005

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this Amendment is to:

1.Answ er Contractor Requests for Information, 2.Adjust the Volume 1 page limit for Joint Ventures, 3.Remove Attachment 0002 and clarify that Attachment 2 to the solicitation does not need to be returned w ith a Proposal.

4.Provide an Amended version of Attachment 1 – Prime Binding Rates Excel Sheet. The Amended version is titled “Prime Binding Rates Excel

Sheet rev 5-18-20” 5.Provide Document WBS format for Sample Task Order Attachment & Provide Document 02 82 14.00 10 - B. 673 Asbestos Report - Merged

6. Extend the Proposal Due date to 10 June 2020.

1. CONTRACT ID CODE PAGE OF PAGES

1 19

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 27-May-2020

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X W912WJ20R0005

X 9B. DATED (SEE ITEM 11)

24-Apr-2020

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

27-May-2020

CODE

U S ARMY ENGR DISTRICT, NEW ENGLAND

696 VIRGINIA RD

CONCORD MA 01742-2751

W912WJ 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION 00010 - SOLICITATION CONTRACT FORM

The required response date/time has changed from 03-Jun-2020 02:00 PM to 10-Jun-2020 02:00 PM.

The following have been added by full text:

RFI - AMENDMENT 0004

QUESTION 1 Please clarify how offerors who are proposing as a joint venture organized as a LLC are to sign the corporate certificate?

ANSWER: Corporate Certificate should be signed by the Key Personnel who have been identified with the authority to legally bind the joint venture and have the authority to bind the joint venture according to the terms of the Joint Venture Agreement.

QUESTION 2 The solicitation states that a bid bond is required. The sample task order special conditions also indicates a bid bond is needed for the sample project. Please clarify. Are two bonds required? If only one bond is required, is it bonding against the contract value (e.g. 20% of $90,000,000…) or bonding against the value of the sample project?

ANSWER: A bid bond is not required for the Sample Task Order. However, other Task Orders awarded under the proposed MATOC may require bid bonds, and, if so, the specific requirement for bid bonds will be defined in the request for proposal documents released for each TO.

QUESTION 3 Please confirm that the joint venture agreement and other JV documentation are not included in the limitation of 35 pages for Volume I.

ANSWER: Joint Venture paperwork will not count against the page limit. PROPOSAL SUBMISSION REQUIREMENTS (Instructions, Conditions & Notices) is amended to reflect this.

QUESTION 4 Relevant experience is requested to be similar to work under this contract, including of a similar price. To support project selection please provide the typical range of project sizes to be assigned under this contract? (e.g. most will be between $1 Million and $7.5 Million) ANSWER: Please see Amendment 0002, Question 4.

QUESTION 5 Please clarify the requirement of Volume I, Part c for a sufficient number of subcontractors to demonstrate experience in the entire breadth of work defined in the Scope of Work. Is it the intent of the Government that offerors provide a list of potential subcontractors? That will be difficult and very lengthy given that this is an IDIQ contract with as-yet-unknown scopes of work other than the overall (and extensive) breadth of potential work. Would the Government please consider removing this requirement and require it instead to be provided with proposals for individual task orders. Offerors would then being evaluated at this phase on their approach to provide subcontractor support as already indicated.

ANSWER: At a minimum, offerors should discuss/demonstrate how they intend to augment their in-house technical teams via subcontract, or with teaming partners, to support successful completion of the relevant scope of services (as defined in the IDIQ SOW). This will likely include listing key subcontractors for work that the prime will not self-perform. Additionally, if an offeror uses the experience of a team member for Factor 1, they should be included in this discussion.

QUESTION 6 If a subcontractor list is required, please consider removing the subsequent list from the page limitation as it may severely restrict an offeror’s ability to provide adequate information in other sections.

ANSWER: As stated in question 5, no subcontractor list is required and the page limitation remains unchanged.

QUESTION 7 Will tabs/dividers (inserted for clarity of review and with no other information other than identification of section) count toward the page count of Volume 1?

ANSWER: Yes.

QUESTION 8 Will a cover sheet (not cover letter) count toward the page count of Volume 1?

ANSWER: Yes.

QUESTION 9 Volume II seems to include the Contract Administration Data – Bidding Schedule (which we understand to be document 004100) in the contract documents section rather than with the pricing inclusions. Please confirm this is correct or otherwise clarify where this document is to be submitted.

ANSWER: Attachment 3 – DOCUMENT 00 41 00 Sample Bidding Schedule should be submitted with Volume 2. Submit Document 004100 with Volume II, Contract Documents.

QUESTION 10 Page 12 of 78 states, “Binding rates shall be burdened with taxes, insurance, and home office overhead but shall not include job site overhead or profit. Offerors shall use the table in the “Binding Rates” tab of the Government-provided Excel spreadsheet (Attachment 1) to submit their binding rates.” However, in the Prime Binding Rates workbook, it appears that the Binding Rates are further marked up by the Home Office Labor Markup in the Burdened Rates sheet. Please clarify if the rates listed on the Binding Rates tab are to include the Home Office Labor Markup.

ANSWER: Attachment 1 has been revised so that the rates in the "Labor Breakdown" tab pull directly from the "Binding Rates" tab. Labor rates on the "Binding Rates" tab are to include Home Office Overhead.

QUESTION 11 If the rates on the Binding Rates sheet are not to include the Home Office Labor Markup, where are contractors to list their binding rates burdened with home office overhead for contract years 2-5 and the six-month option?

ANSWER: The binding rates are to include Home Office Overhead.

QUESTION 12 Attachment 1 (Prime Binding Rates) and Attachment 2 (Sample Task Order Rates) appear to be identical workbooks. Please confirm that offerors are to submit only one of these workbooks in their proposal or otherwise clarify the requirements.

ANSWER: Please submit only the Attachment 1 workbook and complete all tabs.

QUESTION 13 What is the final date that requests for clarification may be submitted?

ANSWER: To ensure timely award of this requirement all Requests for Information should be submitted prior to 27 May 2020.

QUESTION 14 Is there a format for the WBS to be provided as part of the price proposal?

ANSWER: Yes. A WBS list is being provided with this Amendment.

QUESTION 15 Do we submit the pricing workbook(s) in .xls or .pdf or both?

ANSWER: Submit pricing workbooks in xls. Offerors may submit Pdf format in additon to xls.

QUESTION 16 Reviewing Section L, we understand the requirements for the pricing proposal to be as follows.

Solicitation Named Inclusion for Price Proposal, Submission Required, ID/IQ Contract Binding Rates , Completed Binding Rates Tab only of Attachment 1, Sample Task Order Bid Schedule, Completed Bid Schedule Tab only of Attachment 2, Price Proposal Breakdown, Work Breakdown Structure ANSWER: See Solicitation W912WJ20R0005 for all proposal requirements.

QUESTION 17 Please clarify the inclusion of remaining tabs in Attachment 1. Are these to be completed and submitted for the IDIQ contract?

ANSWER: Attachment 1 has been revised while the requirement to fill out Attachment 2 has been removed. Please fill all tabs on Attachment 1.

QUESTION 18 Please clarify the inclusion of remaining tabs in Attachment 2. Are these to be completed and submitted for the Sample Task Order?

ANSWER: Attachment 1 has been revised while the requirement to fill out Attachment 2 has been removed. Please fill all tabs on Attachment 1.

QUESTION 19 Reference page 16 of the solicitation, under 2.1 Factor 1: Experience, the second paragraph, second sentence states: Project relevancy will be determined by those projects which demonstrate successful completion in performing the requirements identified in Section D.4.a. Can you please provide the referenced Section D.4.a. or clarify the location of the requirements?

ANSWER: See Amendment 0002, RFI # 13

QUESTION 20 Please confirm if taxes should be carried in proposals?

ANSWER: Please refer to clause FAR 52.229-3.

QUESTION 21 Please confirm if any state, local, and/or Federal permits will be required on this project?

ANSWER: Permits may be required on future Task Orders. Permits will not be required on the Sample Task Order.

QUESTION 22 Note #15 on drawing A104 states to seal and cap curbs per roof manufactures warranty requirements. Please confirm who owns the roof warranty so they can be contacted to confirm requirements?

ANSWER: We do not have records for the owner of the roof warranty. Our records show there was a roof replacement project designed in 1997.

QUESTION 23 A clarification that we are inquiring about regarding Solicitation W912WJ20R0005 - USACE MATOC New England and New York District, is it intention that the contractors selected for the MATOC will be encouraged to bid every construction task solicited through the MATOC or will contractors be allowed to bid by geographically by State(s) and/or project type?

ANSWER: While the intent of the MATOC is to establish a competitive pool of contractors, and an ideal awardee will bid on all Task Orders, it is up to the awardee to determine whether or not it will provide a proposal.

QUESTION 24 The RFP states that the Certificate of Corporate Authority should be submitted with Phase

2. Since there is no Phase 2 do you want Appendix D, Certificate of Corporate Authority submitted with our proposal?

ANSWER: See Amendment 0002, RFI #2. This is a one phase proposal process. Certificates of Corporate Authority should be submitted with the initial proposal.

QUESTION 25 Page 25 of the RFP, 3.1 Project Manager: “b. A minimum of five (5) years Project Management experience, with a minimum of three (3) years’ experience on vertical construction and renovations, and.” Is there missing text after the “and”?

ANSWER: No. There is no missing text

QUESTION 26 Page 26 of the RFP, 3.2 Site Super: “b. A minimum of five (5) years of experience on construction projects in any capacity, and,” Is there missing text after the “and”?

ANSWER: No. There is no missing text.

QUESTION 27 Solicitation Paragraph 2/1 Factor 1: Experience (pg. 16 of 78) states that “Project relevancy will be determined by those projects which demonstrate successful completion in performing the requirements identified in Section D.4.a.”. Where is Section D.4.a located?

ANSWER: See Amendment 0002, RFI # 13

QUESTION 28 May PPQs previously received be used in the proposal rather than attempting to obtain a new one for the same project, in order to not unnecessarily task client POCs?

ANSWER: See Amendment 0002, RFI #3

QUESTION 29 Bid Option 4 is for miscellaneous floor replacement. Can you identify which flooring is miscellaneous and what flooring is to be carried under Bid Item #2?

ANSWER: Flooring replacement for all spaces, with the exception for Rooms 149, 151, and all latrines are carried under Item Number 0004 "Miscellaneous Flooring Replacement", see DWGS A101, A102 & A103. Floor finishes carried under Item Nubmer 0002 "Building Repairs and Improvements" are indicated in "Room Finish Schedule", DWGS A601, A602 & A603.

QUESTION 30 Have the existing air conditioners been tested for hazardous refrigerant or can the units be disposed as general waste?

ANSWER: Units are considered to have hazardous refrigerant and should be disposed of accordingly.

QUESTION 31 Bid Option #6 is for insulated exterior walls. Will the scope of this option include the entire wall assembly including the proposed insulation or just the insulation within the wall cavities? The description can be interpreted several ways.

ANSWER: Item Number 0006 includes the all interior faces of the entire exterior walls per note #3 in DWGS A101, A102 & A103 and wall sections C1, C2 & C3 in DWG A501.

QUESTION 32 Is this project a seed project that will be awarded for construction or is this a hypothetical project?

ANSWER: This is a Sample Task Order. This Sample Task Order will not be awarded.

QUESTION 33 Will there be a formal walk-through for the project? If not is there a contact on station that we can coordinate with?

ANSWER: No.

QUESTION 34 Base Bid Item 1 is System and Energy Improvements. Is the scope of work for this inclusive of all electrical work or is there any other energy consideration to be made (ie insulation, etc.). Can the scope be clarified?

ANSWER: Base Bid Items, Item Number 0001 is inclusive of all electrical work.

QUESTION 35 Given the magnitude of the Sample Task Order project, it is likely the construction schedule will run multiple pages in 11x17 format. To allow contactors to provide the greatest level of detail and clarity to the Sample Task Order Technical Approach, will the Government consider removing the schedule from the page limitation for Volume 1?

ANSWER: No, the page limitations for this information remain unchanged.

QUESTION 36 Paragraph C.2.1 in Section M on page 16 states, “Project relevancy will be determined by those projects which demonstrate successful completion in performing the requirements identified in Section D.4.a.”

Section D.4.a. is not found in the solicitation documents. Can the Government clarify the referenced section?

ANSWER: See Amendment 0002, RFI # 13

QUESTION 37 Appendix D – Certificate of Corporate Authority states that, “Contractors are to complete and submit a Certificate of Corporate authority of the signing representative with Phase 2, Volume II of their proposal.”

Please clarify when and where we should include this document.

ANSWER: See Amendment 0002, RFI #2. This is a one phase proposal process. Certificates of Corporate Authority should be submitted with the initial proposal.

QUESTION 38 Will the Government please allow two business days after the release of RFI responses for offerors to submit any additional RFI that may occur as a result of the Government’s responses?

ANSWER: The Government will strive to ensure offerors have adequate time after the release of any amendments to incoroporate the responses into their proposal but cannot absolutely commit to extending proposal due dates to allow for additional Requests for Information. All Requests for Information are requested to be submitted prior to 27 May 2020.

QUESTION 39 "1. The Mechanical piping specifications are contradicting…Section 23 05 15 Common Piping says “Steel will not be used for heating hot water / chilled water piping.”

Spec section 23 21 13 LTW Heating system lists type K copper, type L copper and A53 sch 40 steel. Under the copper type K connection options grooved is mentioned, but mentions following under “2.1.3 Mechanical Pipe

Coupling Systems:” “Fittings shall be grooved malleable iron conforming to ASTM A47/A47M, Grade 32510 or ductile iron conforming to ASTM A536, Grade 65-45-12 or malleable iron conforming to ASTM A47/A47M, Grade 32510 “ ANSWER: References to steel pipe are not applicable in 23 21 13.00 20. No steel piping is to be utilized for heating hot water or chilled water piping per 23 05 15. This was requested during design due to previous corrosion problems.

QUESTION 40 to request for a time extension for the above project bid due on May 27th,2020 considering the current Covid-19 situation.

ANSWER: Please see Amendment 0003.

QUESTION 41 Technical Proposal Requirements, Factor 1:For Factor 1 – Experience, please confirm if the five projects demonstrating team experience that best demonstrate the offeror’s experience with recent and relevant projects that are similar in size, complexity and price. Is this size, scope, complexity, relevance and magnitude being rated against the ‘sample SEED Massachusetts Task Order’ or is the prime’s experience being rated against the scopes of work in the IDIQ under 2.0 SCOPE OF WORK DETAILS items 2.1 through 2.5. We cannot find the referenced D.4.a that shows what our Relevant Experience should be tied to. Please reference 2.1 Factor 1:

Experience Evaluation Factors on page 16 of 78.

ANSWER: There is no Section D.4.a. All references to D.4.a have been removed from the solicitation in a previous amendment. As stated in the solicitation, "project relevancy will be determined by those projects which demonstrate successful completion in performing the activities identified in the IDIQ SOW", and ..."Task Orders awarded under this MATOC will typically range in size from $500,000 to $10 million". Projects presented by the contractor will therefore be evaluated on the recency and relevancy of similar sized projects, with varying levels of technical complexity, in association with the SOW activities defined in the solicitation.

QUESTION 42 if there is any chance to postponed the proposal submission date for this opportunity by a week or so?

ANSWER: Please see Amendment 0003

QUESTION 43 Can you please clarify on the level of detail required for the schedule requirements in the technical approach- Factor # 3 and also please specify if there any mandatory line items that needs to be shown on the schedule.

ANSWER: The Contractor's proposed schedule should provide sufficient detail to demonstrate their understanding of the SAMPLE project scope and how it should be executed. At a minimum, the schedule should include critical path elements of the SAMPLE project.

QUESTION 44 Do the finish schedules shown on A-601, 602 and 603 fully representative of what’s required on the renovation job? The notes on A101, A102 and A103 call for things not mentioned. These plans are from 2016 so we wanted to make sure that we’re carrying the proper scope. The specs mention things like recessed soap holders on SECTION 09 30 13 Page 5 that make me nervous that I don’t have the full picture. In addition, any material information you can provide would be greatly appreciated. They say to reference the specs but no specific product data is provided.

ANSWER: Flooring replacement for all spaces, with the exception for Rooms 149, 151, and all latrines are carried under Item Number 0004 "Miscellaneous Flooring Replacement", see DWGS A101, A102 & A103. Floor finishes carried under Item Nubmer 0002 "Building Repairs and Improvements" are indicated in "Room Finish Schedule", DWGS A601, A602 & A603.

QUESTION 45 Division#8: Are locksets to be mortise locks or cylindrical locks? Both are listed in spec and hardware sets do not qualify & What are existing lock manufacturer and model? -On bid option openings, is hardware for these openings part of the base bid, or the bid option with the doors and frames?

ANSWER: They should be mortise locks. Existing manufacturer is Kaba; model varies - must have swipe cards and removable cores.

QUESTION 46 Plans & Specifications call for the Government to provide the fire alarm control panel. Typically, the supplier of the FACP provides programming and start-up services. Will the Government provide programming and start-up services with the new FACP that they are providing?

ANSWER: FACP is to be installed by Contractor per FA-001 Fire Alarm Note 3. This includes programming and start up.

QUESTION 47 Amendment 0002 states that a bid bond is not required for the sample project. However, the proposal submission requirements still mention a hard copy of a bid bond needing to be submitted prior to the deadline. Can you please clarify whether any bond at all needs to be submitted with this proposal? Would it be helpful to submit proof of our bonding capability at this time?

ANSWER: See Amendment 0002, Question 11

QUESTION 48 Attachment 1 and Attachment 2 appear to be identical. Although we are required to fill the Binding Rates tab for Attachment 1 and the Bid Schedule tab for Attachment 2, would the Government permit us to complete both tabs of one of the Excel documents, or would you prefer to see both Attachments 1 and 2 completed and part of our proposal?

ANSWER: Please submit only the Attachment 1 workbook and complete all tabs.

QUESTION 49 There is not hazmat report provided along with solicitation for the sample project. Can you please provide one. The only hazardous material report currently available is the attached Asbestos Report.

ANSWER: No other documentation on the presence or absence of hazardous materials is available.

QUESTION 50 Could you tell me when the deadline for rfi's for this bid is or was ANSWER: All RFI's are requested by 27 May 2020.

QUESTION 51 Solicitation page 6 and 13 of 78:Since the ‘sample SEED’ project is fictitious and unawardable are you still expecting an original bid bond per page 6 and 13 of 78 of the solicitation? Would you rather receive a surety bond letter showing our single project and aggregate bonding capacity, with our company Name, on official letterhead, stating that we’re in good standing for tasks orders up to $5M?

ANSWER: The Sample Project will not be awarded but is generally representative of future Task Orders. See Amendment 0002, Question 11.

QUESTION 52 There is no description provided explaining the line items & Bid Options on the bid schedule.

Please provide a bid Schedule Description sheet.

ANSWER: Please see WBS Format document attached with this Amendment

QUESTION 53 Please provide the drawings clearly showing the bid options for the sample project, as the description of bid options is vague.

ANSWER: Please see WBS Format document attached with this Amendment.

QUESTION 54 There is an excel provided for the prime binding rates, question is should rates on the binding rates tab of the excel include labor markups? If so why is there a separate labor markups tab?

ANSWER: Attachment 1 has been revised so that the rates in the "Labor Breakdown" tab pull directly from the "Binding Rates" tab. Please use the revised Attachment 1 for submitting price information.

QUESTION 55 In the labor breakdown tab of the excel sheet there is a formula ='Burdened Rates'!H9 ( this is different for each position involved .

ANSWER: Attachment 1 has been revised. The revised Attachment 1 does not include this error.

QUESTION 56 There is no tab labeled burdened rate in the excel , where is this page or tab being populated from?

The link to the burdened rate seems to be the value entered for the position for the base year.

ANSWER: Attachment 1 has been revised. The revised Attachment 1 does not include this error.

QUESTION 57 Solicitation page 6 and 13 of 78: Since the ‘sample SEED’ project is fictitious and unawardable are you still expecting an original bid bond per page 6 and 13 of 78 of the solicitation? Would you rather receive a surety bond letter showing our single project and aggregate bonding capacity, with our company Name, on official letterhead, stating that we’re in good standing for tasks orders up to $5M?

ANSWER: The Sample Project is a project will not be awarded but is generally representative of future Task Orders. See Amendment 0002, Question 11.

SECTION 00100 - BIDDING SCHEDULE/INSTRUCTIONS TO BIDDERS

The following have been modified:

PROPOSAL SUBMISSION

PROPOSAL SUBMISSION REQUIREMENTS (Instructions, Conditions & Notices)

VOLUME TITLE DIGITAL

COPIES

PAGE LIMIT

Volume I: Technical Information and Joint Venture Documentation

1 35

Volume II: Price, SF1442 and Amendments, Certificate of Corporate Authority

1 N/A

1) NOTE: All pages, including but not limited to cover letters, Table of Contents pages, tables, illustrations, and appendices will be counted in the page calculation; with the exception of Past Performance Questionnaires, CPARS records, Joint Venture Documentation and resumes. Past Performance Questionnaires, CPARS records and resumes WILL NOT count against the page limits. Pages that exceed the above noted page limitations will be removed, not read, and will not be evaluated by the Government.

SECTION 00800 - SPECIAL CONTRACT REQUIREMENTS

The following have been modified:

ATTACHMENTS

Attachment 1 – Prime Binding Rates Excel Sheet rev 5-18-20 Attachment 2 – The Solicitation has been amended to remove attachmet 0002 Attachment 3 – DOCUMENT 00 41 00 Sample Bidding Schedule Attachment 4 – Sample Task Order Specifications dated July 2016 and titled “Interior Renovations, Building 673” Attachment 5 – Sample Task Order Drawings titled “Repair Barracks Building 673” Attachment 6 – Sample Task Order special contract requirements document Attachment 7 – Wage Determination # MA20200013, modified 03/13/2020

(End of Summary of Changes)