W912P5-17-B-0001Am4_TSpecs-pages.pdf

Lock Chamber Chickamauga Lock Replacement W912P5-17-B-0001 Amendment 0004 Hamilton County, Tennessee altitudes shall be derated in accordance with the manufacturer's instructions).

b. Non-operating altitude: Sea level to 40,000 feet.

c. Operating ambient temperature range; 32 to 104 degrees F.

d. Non-operating and storage ambient temperature range; -5 to +112 degrees F.

e. Operating relative humidity: 0 to 95 percent, non-condensing.

1.6 Spare Parts and Accessories

Spare parts shall be furnished as specified below. These spare parts and accessories are additional items to what is shown as spares on the drawings. Spare parts and accessories shall be carefully packaged and clearly marked indicating the package contents. All spare parts shall be of the same material and workmanship, shall meet the same requirements, and shall be interchangeable with the corresponding original parts furnished.

a. 2 - Fuses of each type and size.

b. 1 - LCS CPU module.

c. 1 - LCS Fiber to Ethernet module.

d. 1 - LCS 13 solt chassis.

e. 1 - LCS Interface Module.

f. 2 - LCS power supply module.

g. 1 - LCS Ethernet switch.

h. 2 - LCS discrete input module.

i. 2 - LCS discrete output module.

j. 1 - LCS analog input module.

k. 1 - LCS analog output module.

l. 25 - LCS DVD storage media.

m. 6 - Ream LCS printer paper for each size.

n. 1 - LCS printer toner/ink cartridge of each type.

o. 6 - Indicating light assemblies of each type.

p. 24 - Lamp for each type and rating of indicating light.

q. 1 - Selector switch assemblies of each type.

r. 1 - Pushbutton assembly of each type and rating.

s. 1 - Joystick switch assembly.

SECTION 40 95 00 Page 9

Lock Chamber Chickamauga Lock Replacement W912P5-17-B-0001 Amendment 0004 Hamilton County, Tennessee

t. 1 - Torque control switch assembly.

u. 1 - Control power transformer of each type and rating.

v. 6 - Control relay of each type and rating.

w. 1 - Time delay relay of each type.

x. 1 - Power supply of each type and rating.

y. 1 - 4-20 mA converter of each type and rating.

z. 1 - Fiber optic transmitter.

aa. 1 - Fiber optic receiver.

ab. 1 - Electronic LED bar indicator.

ac. 1 - Motor circuit protector of each type and rating.

ad. 1 - Reduced voltage soft starter of each type and rating.

ae. 1 - Circuit breaker of each type and rating except DIN rail mounted circuit breakers.

af. 2 - DIN rail mounted circuit breaker of each type and rating.

ag. 1 - Operating coil for each size of contactor

ah. 1 - Complete set of 3-pole stationary and moving contact assemblies for each size of contactor.

ai. 1 - Contactor overload relays of each type and rating.

aj. 1 - Spare set (typically 3 heaters) of overload heater elements for each overload heater rating.

PART 2 PRODUCTS

2.1 MATERIALS AND EQUIPMENT

2.1.1 Standard Products

Materials and equipment shall be standard unmodified products of a manufacturer regularly engaged in the manufacturing of such products.

Units of the same type of equipment shall be products of a single manufacturer. Items of the same type and purpose shall be identical and supplied by the same manufacturer, unless replaced by a new version approved by the Government. Control system shall be Allen Bradley Contrologix or approved equal.

2.1.2 Nameplates

Each major component of equipment shall have the manufacturer's name and address, and the model and serial number in a conspicuous place. Laminated plastic nameplates shall be provided for equipment devices and panels furnished. Each nameplate shall identify the device, such as pump "P-1" or valve "VLV-402". Labels shall be coordinated with the drawings. Laminated plastic shall be 1/8 inch thick, white with black center core. Nameplates

SECTION 40 95 00 Page 10