Arch_Keynotes_UFGS_118339.txt

TXT text file 155 KB Posted Jul 11, 2017

Attached to: Chickamauga Lock Chamber Replacement
Solicitation number: W912P5-17-B-0001
Issued by: Department of the Army Corps of Engineers Engineering District Nashville

About this file

From the source

Not Listed

Text of this file

Division 01	GENERAL REQUIREMENTS
01 50 00	TEMPORARY FACILITIES AND CONTROLS	Division 01
01 50 00.A1	PLACEHOLDER	01 50 00
01 62 35	RECYCLED / RECOVERED MATERIALS	Division 01
01 62 35.A1	PLACEHOLDER	01 62 35
01 74 19	CONSTRUCTION DEMOLITION WASTE MANAGEMENT	Division 01
01 74 19.A1	PLACEHOLDER	01 74 19
Division 02	EXISTING CONDITIONS
02 40 00	DEMOLITION AND STRUCTURE MOVING	Division 02
02 40 00.A1	PLACEHOLDER	02 40 00
02 41 00	DEMOLITION	Division 02
02 41 00.A1	PLACEHOLDER	02 41 00
02 81 00	TRANSPORTATION AND DISPOSAL OF HAZARDOUS MATERIALS	Division 02
02 81 00.A1	PLACEHOLDER	02 81 00
Division 03	CONCRETE
03 15 00	CONCRETE ACCESSORIES	Division 03
03 15 00.A1	PLACEHOLDER	03 15 00
03 20 00	REINFORCING STEEL	Division 03
03 20 00.A1	"REBAR, SEE STRUCTURAL"	03 20 00
03 31 00	STRUCTURAL CONCRETE	Division 03
03 31 00.A1	CONCRETE SLAB	03 31 00
03 31 00.A2	"CONCRETE SLAB, SEE STRUCTURAL"	03 31 00
03 31 00.A3	CONCRETE MONOLITH	03 31 00
03 31 00.A4	12" REINFORCED CONCRETE SLAB OVER VAPOR BARRIER (TAPED AND WRAPPING UP SLAB ENDS), OVER CAPILLARY WATER BARRIER	03 31 00
03 31 00.A5	6" CONCRETE SLAB OVER VAPOR BARRIER (TAPED AND WRAPPING UP SLAB ENDS), OVER 2" RIGID INSULATION (R-12 MIN) FOR 24" AT PERIMETER, OVER CAPILLARY WATER BARRIER	03 31 00
03 31 00.A6	"10"" REINFORCED CONCRETE SLAB WITH IN-FLOOR RADIANT HEATING OVER VAPOR BARRIER (TAPED AND WRAPPING UP SLAB ENDS), OVER 2"" CONTINUOUS RIGID INSULATION (R-12 MIN) UNDER HIGH BAY AREA, OVER CAPILLARY WATER BARRIER"	03 31 00
03 31 00.A7	"8"" REINFORCED CONCRETE SLAB OVER 8"" AGGREGATE BASE COURSE, SEE CIVIL"	03 31 00
03 31 00.B1	CONCRETE WALL	03 31 00
03 31 00.B2	"CONCRETE FOUNDATION WALL, SEE STRUCTURAL"	03 31 00
03 31 00.B3	"CONCRETE WALL, SEE STRUCTURAL"	03 31 00
03 31 00.B4	"8"" REINFORCED CONCRETE WALL "	03 31 00
03 31 00.C1	CONCRETE FOOTING	03 31 00
03 31 00.C2	"CONCRETE FOOTING, SEE STRUCTURAL"	03 31 00
03 31 00.D1	REINFORCING BAR	03 31 00
03 31 00.E1	WOVEN WIRE FABRIC	03 31 00
03 31 00.F1	WATERSTOP	03 31 00
03 31 00.G1	MOISTURE BARRIER	03 31 00
03 31 00.H1	CONSTRUCTION JOINT	03 31 00
03 31 00.J1	CONTROL JOINT	03 31 00
03 31 00.K1	ISOLATION JOINT	03 31 00
03 31 00.L1	EXPANSION JOINT	03 31 00
03 31 00.M1	KEYED JOINT	03 31 00
03 31 00.N1	NON-SHRINK GROUT	03 31 00
03 31 00.P1	CONCRETE FILL	03 31 00
03 31 00.P2	"CONCRETE FILL, SEE STRUCTURAL"	03 31 00
03 31 00.P3	CONCRETE FILLED CMU PILASTER	03 31 00
03 31 00.Q1	CONCRETE LINTEL	03 31 00
03 31 00.Q2	"CONCRETE LINTEL, SEE STRUCTURAL"	03 31 00
03 31 00.R1	EXPANSION MATERIAL	03 31 00
03 31 00.S1	CONCRETE RETAINING WALL	03 31 00
03 31 00.S2	"CONCRETE RETAINING WALL, SEE STRUCTURAL"	03 31 00
03 31 00.T1	CAST IN PLACE REINF. CONCRETE	03 31 00
03 31 00.U1	3-1/2" CONCRETE OVER 1-1/2" STEEL DECK, SEE STRUCTURAL	03 31 00
03 31 00.U2	POUR STOP	03 31 00
03 33 00	CAST-IN-PLACE ARCHITECTURAL CONCRETE	Division 03
03 33 00.A1	CAST-IN-PLACE SCUBA TANK FILLING TUBS	03 33 00
03 35 36	POLISHED CONCRETE FLOOR SYSTEM	Division 03
03 35 36.A1	POLISHED CONCRETE FLOOR SYSTEM	03 35 36
03 40 00	PRECAST STRUCTURAL CONCRETE	Division 03
03 40 00.A1	PLACEHOLDER	03 40 00
03 45 00	PRECAST ARCHITECTURAL CONCRETE	Division 03
03 45 00.A1	PRECAST CONCRETE WINDOW SILL WITH DRIP EDGE	03 45 00
03 45 00.A2	PRECAST CONCRETE WINDOW HEAD	03 45 00
03 45 00.A3	PRECAST CONCRETE ELEMENT	03 45 00
03 45 00.A4	PRECAST CONCRETE COPING	03 45 00
03 50 00	CAST ROOF DECKS	Division 03
03 50 00.A1	PLACEHOLDER	03 50 00
03 60 00	GROUTING	Division 03
03 60 00.A1	NON-SHRINK GROUT	03 60 00
03 60 00.A2	FILL W/ GROUT	03 60 00
Division 04	MASONRY
04 05 00	COMMON WORK RESULTS FOR MASONRY	Division 04
04 05 00.A1	PLACEHOLDER	04 05 00
04 20 00	UNIT MASONRY	Division 04
04 20 00.A1	BRICK VENEER	04 20 00
04 20 00.A2	"FACE BRICK, STANDARD"	04 20 00
04 20 00.A3	"FACE BRICK, MODULAR"	04 20 00
04 20 00.B1	HOLLOW BRICK	04 20 00
04 20 00.C1	"4"" UTILITY BRICK VENEER (X2) WITH BRICK TIES PER SPEC 04 20 00"	04 20 00
04 20 00.C2	"4"" UTILITY BRICK, ROWLOCK COURSE (X2)"	04 20 00
04 20 00.C3	"4"" UTILITY BRICK VENEER (ACCENT) (X3)"	04 20 00
04 20 00.C4	"4"" UTILITY BRICK, ROWLOCK COURSE (ACCENT) (X3)"	04 20 00
04 20 00.D1	CONCRETE BRICK	04 20 00
04 20 00.E1	"6"" CONCRETE MASONRY UNIT"	04 20 00
04 20 00.E2	"8"" CONCRETE MASONRY UNIT"	04 20 00
04 20 00.E3	"6"" PREFACED (BOTH SIDES) CMU"	04 20 00
04 20 00.E4	"8"" PREFACED (ONE SIDE) CMU"	04 20 00
04 20 00.E5	"8"" PREFACED (BOTH SIDES) CMU"	04 20 00
04 20 00.E6	"8"" GROUT FILLED SPLIT-FACED CONCRETE MASONRY UNIT (CMU) (X1)"	04 20 00
04 20 00.E7	"4"" CMU WITH CERAMIC TILE FINISH"	04 20 00
04 20 00.E8	"8"" SPLIT-FACED CONCRETE MASONRY UNIT (CMU) BOND BEAM (X1)"	04 20 00
04 20 00.F1	"6"" PREFACED (BOTH SIDES) CMU BOND BEAM, SEE STRUCTURAL"	04 20 00
04 20 00.F2	"8"" PREFACED (ONE SIDE) CMU BOND BEAM, SEE STRUCTURAL"	04 20 00
04 20 00.F3	"8"" PREFACED (BOTH SIDES) CMU BOND BEAM, SEE STRUCTURAL"	04 20 00
04 20 00.F4		04 20 00
04 20 00.G1	CMU LINTEL	04 20 00
04 20 00.H1	CMU (SPECIAL SHAPE)	04 20 00
04 20 00.J1	MORTAR	04 20 00
04 20 00.K1	GROUT	04 20 00
04 20 00.L1	MASONRY ANCHOR	04 20 00
04 20 00.M1	MASONRY TIE	04 20 00
04 20 00.N1	CONTROL JOINT	04 20 00
04 20 00.P1	EXPANSION JOINT	04 20 00
04 20 00.Q1	THROUGH WALL FLASHING	04 20 00
04 20 00.R1	CAVITY MORTAR MESH	04 20 00
04 20 00.S1	WEEP HOLE VENTILATOR	04 20 00
04 20 00.T1	"EXTERIOR VENEER OVER AIRSPACE OVER 2-1/2"" RIGID INSULATION (R-15 MIN) OVER GLASS MAT GYPSUM SHEATHING WITH FACTORY OR FLUID APPLIED VAPOR/AIR BARRIER OVER 6"" STEEL STUD INFILLED WITH FIBERGLASS BATT INSULATION (R-13 MIN) AND 5/8"" GYPSUM WALL BOARD, TYPE-X "	04 20 00
04 20 00.T2	"EXTERIOR VENEER OVER AIRSPACE OVER 2-1/2"" ADHESIVE APPLIED RIGID INSULATION (R-15 MIN) OVER 8"" PREFACED CMU WITH FLUID APPLIED VAPOR/AIR BARRIER"	04 20 00
04 20 00.T3	"EXTERIOR VENEER OVER AIRSPACE OVER 2-1/2"" ADHESIVE APPLIED RIGID INSULATION (R-15 MIN) OVER 8"" CMU WITH 2-1/2"" STEEL STUD FRAMING AT 16"" O.C. AND 5/8"" GYPSUM WALL BOARD, TYPE-X "	04 20 00
04 21 13.13	NONBEARING MASONRY VENEER/STEEL STUD WALLS	Division 04
04 21 13.13.A1	BRICK VENEER	04 21 13.13
04 21 13.13.A2	"FACE BRICK, STANDARD"	04 21 13.13
04 21 13.13.A3	"FACE BRICK, MODULAR"	04 21 13.13
04 21 13.13.B1	HOLLOW BRICK	04 21 13.13
04 21 13.13.C1	UTILITY BRICK	04 21 13.13
04 21 13.13.D1	CONCRETE BRICK	04 21 13.13
04 21 13.13.E1	"4"" SPLIT FACED CONCRETE MASONRY UNIT (CMU) VENEER (X1) WITH BRICK TIES PER SPEC 04 20 00"	04 21 13.13
04 21 13.13.E2	"4"" CONCRETE MASONRY UNIT (CMU)"	04 21 13.13
04 21 13.13.E3	CMU BOND BEAM (SIZE) (TYPE)	04 21 13.13
04 21 13.13.E4	CMU LINTEL (SIZE) (TYPE)	04 21 13.13
04 21 13.13.E5	CMU (SPECIAL SHAPE)	04 21 13.13
04 21 13.13.F1	MORTAR	04 21 13.13
04 21 13.13.G1	GROUT	04 21 13.13
04 21 13.13.H1	MASONRY VENEER ANCHOR (TYPE)	04 21 13.13
04 21 13.13.J1	MASONRY TIE (TYPE)	04 21 13.13
04 21 13.13.K1	CONTROL JOINT (SIZE) (TYPE)	04 21 13.13
04 21 13.13.L1	EXPANSION JOINT (SIZE) (TYPE)	04 21 13.13
04 21 13.13.M1	THROUGH WALL FLASHING	04 21 13.13
04 21 13.13.N1	MEMBRANE FLASHING	04 21 13.13
04 21 13.13.P1	CAVITY MORTAR MESH	04 21 13.13
04 21 13.13.Q1	WEEP HOLE VENTILATOR	04 21 13.13
04 21 13.13.R1	RIGID INSULATION (R-30)	04 21 13.13
04 21 13.13.S1	"1/2"" PLYWOOD SHEATHING "	04 21 13.13
04 21 13.13.S2	SHEATHING - (THICKNESS) (TYPE)	04 21 13.13
04 21 13.13.T1	AIR/MOISTURE BARRIER	04 21 13.13
04 23 00	GLASS UNIT MASONRY	Division 04
04 23 00.A1	GLASS BLOCK	04 23 00
04 72 00	CAST STONE MASONRY	Division 04
04 72 00.A1	CAST STONE WATERTABLE (X4)	04 72 00
04 72 00.A2	"4"" CAST STONE ACCENT BAND"	04 72 00
Division 05	METALS
05 05 00	COMMON WORK RESULTS FOR METALS	Division 05
05 05 00.A1	"3/8"" STRAIGHT BOLT"	05 05 00
05 05 00.A2	"3/8"" CORNER BOLT"	05 05 00
05 05 00.A3	3/4" EXPANSION ANCHOR	05 05 00
05 05 00.A4	ANCHOR BOLT	05 05 00
05 12 00	STRUCTURAL STEEL FRAMING	Division 05
05 12 00.A1	STRUCTURAL STEEL W-SHAPE	05 12 00
05 12 00.A2	STEEL BEAM, SEE STRUCTURAL	05 12 00
05 12 00.B1	"STEEL TUBE, 2-1/2""X2-1/2""X1/4"" WITH WELDED END CAPS AT 60"" O.C. MAX"	05 12 00
05 12 00.B2	"STEEL TUBE, 2""X2""X1/4"""	05 12 00
05 12 00.B3	"STEEL TUBE CROSS-BRACING, SEE STRUCTURAL"	05 12 00
05 12 00.C1	STEEL PIPE SHAPE	05 12 00
05 12 00.C2	"STEEL PIPE HANGING ROD, 1-1/4"" DIA."	05 12 00
05 12 00.C3	STEEL ANGLE	05 12 00
05 12 00.C4	"STEEL ANGLE FRAME, 1-1/4""X1-1/4""X1/8"" "	05 12 00
05 12 00.D1	"STEEL BASE PLATE, 4""X4""X1/4"" WITH 3/8"" ANCHORS"	05 12 00
05 12 00.D2	"STEEL BASE PLATE, 2""X7""X1/4"" WITH 3/8"" EXPANSION ANCHORS"	05 12 00
05 12 00.E1	"STEEL PLATE SLAM BAR, 2""X1-1/2""X1/8"", WELDED TO EACH DOOR PANEL "	05 12 00
05 12 00.F1	"STEEL TRUSS, SEE STRUCTURAL"	05 12 00
05 12 00.G1	"STEEL LINTEL, SEE STRUCTURAL"	05 12 00
05 12 00.W	"STEEL BEAM, SEE STRUCTURAL"	05 12 00
05 12 00.X	"PIPE COLUMN, SEE STRUCTURAL"	05 12 00
05 12 00.Y	"TUBE COLUMN, SEE STRUCTURAL"	05 12 00
05 12 00.Z1	"STEEL COLUMN, SEE STRUCTURAL"	05 12 00
05 12 00.Z2	"PEMB STEEL COLUMN, SEE STRUCTURAL"	05 12 00
05 30 00	STEEL DECKING	Division 05
05 30 00.A1	"1 1/2"" STEEL DECK, SEE STRUCTURAL"	05 30 00
05 30 00.A2	1-1/2" ACOUSTICAL ROOF DECK SYSTEM, SEE STRUCTURAL	05 30 00
05 30 00.B1	"3"" STEEL DECK, SEE STRUCTURAL"	05 30 00
05 30 00.C1	"CORRUGATED METAL DECK, SEE STRUCTURAL"	05 30 00
05 40 00	COLD-FORMED METAL FRAMING	Division 05
05 40 00.A1	STEEL STUD	05 40 00
05 40 00.A2	"2-1/2"" STEEL STUD"	05 40 00
05 40 00.A3	"3-5/8"" STEEL STUD"	05 40 00
05 40 00.A4	"4"" STEEL STUD"	05 40 00
05 40 00.A5	"6"" STEEL STUD"	05 40 00
05 40 00.A6	6" STEEL STUD INFILLED WITH FIBERGLASS BATT INSULATION (R-19 MIN)	05 40 00
05 40 00.A7	"8"" STEEL STUD"	05 40 00
05 40 00.A8	"3-5/8"" STEEL STUD INFILLED WITH SOUND ATTENUATION INSULATION"	05 40 00
05 40 00.A9	"2-1/2"" C-H STEEL STUD"	05 40 00
05 40 00.B1	STEEL TRACK	05 40 00
05 40 00.C1	STEEL JOISTS	05 40 00
05 40 00.D1	STEEL BRACING	05 40 00
05 40 00.E1	STEEL BRIDGING	05 40 00
05 40 00.F1	STEEL GUSSET PLATE	05 40 00
05 40 00.G1	STEEL GROMMET	05 40 00
05 40 00.H1	STEEL HAT CHANNEL	05 40 00
05 40 00.H2	"7/8"" STEEL HAT CHANNEL"	05 40 00
05 40 00.H3	"1 1/2"" STEEL HAT CHANNEL"	05 40 00
05 40 00.J1	STEEL CHANNEL	05 40 00
05 40 00.K1	DEFLECTION	05 40 00
05 40 00.K2	STEEL DEFLECTION TRACK	05 40 00
05 40 00.K3	STEEL DEFLECTION CLIP	05 40 00
05 40 00.K4	STEEL LONG LEG SLIP TRACK	05 40 00
05 50 00	METAL FABRICATIONS	Division 05
05 50 00.A1	CAST ALUMINUM PLAQUE	05 50 00
05 50 00.B1	PRE-ENGINEERED EXTRUDED ALUMINUM CANOPY WITH HANGER RODS (X4) HUNG PER MANUFACTURER'S RECOMMENDATIONS	05 50 00
05 50 13	MISCELLANEOUS METAL FABRICATIONS	Division 05
05 50 13.A1	ACCESS DOOR	05 50 13
05 50 13.B1	JOINT COVER	05 50 13
05 50 13.B2	EXPANSION JOINT COVER	05 50 13
05 50 13.B3	CONTROL JOINT COVER	05 50 13
05 50 13.C1	CORNER GUARDS AND SHIELDS	05 50 13
05 50 13.D1	COVER PLATES AND FRAMES	05 50 13
05 50 13.E1	FLOOR FRAMES AND GRATINGS	05 50 13
05 50 13.E2	FLOOR MAT FRAME	05 50 13
05 50 13.E3	FLOOR GRATING	05 50 13
05 50 13.F1	GAS TIGHT MANHOLE COVER AND FRAME	05 50 13
05 50 13.G1	BOLLARDS AND PIPE GUARDS	05 50 13
05 50 13.G2	4" DIA, 48" HIGH CONCRETE FILLED STEEL PIPE BOLLARD	05 50 13
05 50 13.H1	SAFETY CHAINS	05 50 13
05 50 13.J1	SECURITY GRILLES	05 50 13
05 50 13.K1	STRUCTURAL STEEL DOOR FRAMES	05 50 13
05 50 13.L1	WHEEL GUARDS	05 50 13
05 50 13.M1	WINDOW AND DOOR GUARDS	05 50 13
05 50 13.N1	"CHIMNEYS, VENTS AND SMOKESTACKS"	05 50 13
05 50 13.P1	MISCELLANEOUS SHAPES	05 50 13
05 50 13.P2	STEEL ANGLE (SIZE)	05 50 13
05 50 13.P3	CLIP ANGLE (SIZE AND SPACING)	05 50 13
05 50 13.P4	"STEEL PLATE, SEE STRUCTURAL"	05 50 13
05 50 13.P5	STEEL BASE PLATE (SIZE)	05 50 13
05 50 13.Q1	ANCHORS AND FASTENERS	05 50 13
05 50 13.R1	ANCHOR BOLT (SIZE AND SPACING)	05 50 13
05 50 13.S1	WIRE WOVEN MESH PARTITION TO STRUCTURE	05 50 13
05 50 13.S2	"EXPANDED METAL MESH, 18GA, FLATTENED"	05 50 13
05 50 13.S3	10 GA. WIRE WOVEN MESH	05 50 13
05 50 13.T1	"POWDER COATED STEEL BASE CABINET, DOUBLE DOOR, WITH ADJUSTABLE SHELF"	05 50 13
05 50 13.U1	POWDER COATED STEEL DRAWER STACK	05 50 13
05 50 13.V1	"POWDER COATED STEEL WALL CABINET, DOUBLE DOOR, WITH (2) ADJUSTABLE SHELVES"	05 50 13
05 50 13.V2	"POWDER COATED STEEL TALL CABINET, DOUBLE DOOR WITH (5) ADJUSTABLE SHELVES"	05 50 13
05 50 13.W1	EXTRUDED ANODIZED ALUMINUM SUNSHADE WITH AIRFOIL BLADES (X4)	05 50 13
05 50 13.X1	(8) TA-50 GEAR LOCKERS	05 50 13
05 50 13.Z1	FIXED LADDER WITH CAGE	05 50 13
05 50 13.Z2	METAL LADDER	05 50 13
05 50 13.Z3	SHIPS LADDER	05 50 13
05 51 00	METAL STAIRS	Division 05
05 51 00.A1	CONCRETE FILLED STEEL PAN STAIRS WITH HSS STRINGERS, PAINTED	05 51 00
05 51 00.B1	STEEL CHANNEL STRINGER	05 51 00
05 51 00.B2	"STEEL CHANNEL STRINGER, SEE STRUCTURAL"	05 51 00
05 51 00.C1	HSS 2X12 PAINTED STEEL STRINGER, TYP"	05 51 00
05 51 00.C2	"STEEL PLATE STRINGER, SEE STRUCTURAL"	05 51 00
05 51 00.D1	STEEL RISER	05 51 00
05 51 00.D2	STEEL PLATE RISER	05 51 00
05 51 00.E1	STEEL TREAD	05 51 00
05 51 00.E2	STEEL PLATE TREAD	05 51 00
05 51 00.E3	"STEEL PLATE TREAD, RAISED PATTERN"	05 51 00
05 51 00.E4	GALVANIZED STEEL CHECKER PLATE TREADS, RISERS AND LANDING WITH HSS STRINGERS (X5)	05 51 00
05 51 00.E5	"STEEL PAN TREAD, CONCRETE FILLED"	05 51 00
05 51 00.F1	STEEL LANDING PLATFORM	05 51 00
05 51 00.F2	STEEL PLATE LANDING PLATFORM	05 51 00
05 51 00.F3	"STEEL PLATE LANDING PLATFORM, RAISED PATTERN"	05 51 00
05 51 00.F4	STEEL GRATING LANDING PLATFORM	05 51 00
05 51 00.F5	"STEEL SUBPLATFORM, CONCRETE FILL"	05 51 00
05 51 00.G1	METAL NOSING	05 51 00
05 51 00.G2	CAST METAL SAFETY NOSING	05 51 00
05 51 00.G3	CAST ALUMINUM SAFETY NOSING	05 51 00
05 51 00.G4	CAST IRON SAFETY NOSING	05 51 00
05 51 00.H1	STEEL FRAMING	05 51 00
05 51 00.J1	PRECAST CONCRETE TREAD	05 51 00
05 52 00	METAL RAILINGS	Division 05
05 52 00.A1	HANDRAIL	05 52 00
05 52 00.A2	STEEL PIPE HANDRAIL	05 52 00
05 52 00.A3	GALV. STEEL PIPE HANDRAIL	05 52 00
05 52 00.A4	ALUMINUM PIPE HANDRAIL	05 52 00
05 52 00.B1	GUARDRAIL	05 52 00
05 52 00.B2	STEEL PIPE GUARDRAIL	05 52 00
05 52 00.B3	GALV. STEEL PIPE GUARDRAIL	05 52 00
05 52 00.B4	ALUMINUM PIPE GUARDRAIL	05 52 00
05 52 00.C1	SAFETY CHAIN	05 52 00
Division 06	"WOOD, PLASTICS, AND COMPOSITES"
06 01 00	"MAINTENANCE OF WOOD, PLASTICS, AND COMPOSITES"	Division 06
06 01 00.A1	PLACEHOLDER	06 01 00
06 05 00	"COMMON WORK RESULTS FOR WOOD, PLASTICS, AND COMPOSITES"	Division 06
06 05 00.A1	PLACEHOLDER	06 05 00
06 10 00	WOOD FRAMING	Division 06
06 10 00.A1	STUD	06 10 00
06 10 00.A2	2 X 4 STUD	06 10 00
06 10 00.A3	2 X 6 STUD	06 10 00
06 10 00.A4	2 X 8 STUD	06 10 00
06 10 00.B1	PLATE	06 10 00
06 10 00.C1	SILL	06 10 00
06 10 00.D1	PRESSURE TREATED WOOD BLOCKING	06 10 00
06 10 00.E1	BRIDGING	06 10 00
06 10 00.F1	BRACING	06 10 00
06 10 00.G1	RAFTER	06 10 00
06 10 00.H1	JOIST	06 10 00
06 10 00.J1	HEADER	06 10 00
06 10 00.K1	LINTEL	06 10 00
06 10 00.L1	FRAMING - SEE STRUCTURAL	06 10 00
06 10 00.L2	FRAMING (SIZE AND SPACING)	06 10 00
06 10 00.M1	PRESERVATIVE TREATED (SIZE AND MEMBER)	06 10 00
06 10 00.N1	FIRE RETARDANT TREATED (SIZE AND MEMBER)	06 10 00
06 10 00.P1	GLUE-LAMINATED (SIZE AND TYPE)	06 10 00
06 10 00.Q1	ENGINEERED LUMBER (SIZE AND TYPE)	06 10 00
06 10 00.R1	"5/8"" EXTERIOR SHEATHING WITH FLUID APPLIED VAPOR/AIR BARRIER"	06 10 00
06 10 00.R2	"1/2"" PLYWOOD SHEATHING"	06 10 00
06 10 00.R3	"3/4"" PLYWOOD SHEATHING"	06 10 00
06 10 00.R4	"3/4"" PLYWOOD NAILER"	06 10 00
06 10 00.S1	UNDERLAYMENT (SIZE AND TYPE)	06 10 00
06 10 00.T1	TRUSS (SIZE AND TYPE)	06 10 00
06 10 00.U1	STAIRS	06 10 00
06 10 00.V1	TRIM	06 10 00
06 10 00.W1	AIR INFILTRATION BARRIER	06 10 00
06 10 00.Y1	MISCELLANEOUS HARDWARE	06 10 00
06 10 00.Z1	MISCELLANEOUS MEMBERS	06 10 00
06 18 00	GLUE-LAMINATED CONSTRUCTION	Division 06
06 18 00.A1	"GLUE-LAMINATED BEAM, SEE STRUCTURAL"	06 18 00
06 20 00	FINISH CARPENTRY	Division 06
06 20 00.A1	"WOOD TRIM (TYPE, SIZE AND SPECIES) BASE/COVE/CROWN/CHAIR"	06 20 00
06 20 00.B1	WOOD BASE	06 20 00
06 20 00.C1	WOOD COVE MOLDING	06 20 00
06 20 00.D1	WOOD CROWN MOLDING	06 20 00
06 20 00.E1	WOOD CHAIR RAIL	06 20 00
06 20 00.F1	WOOD SHELVING	06 20 00
06 20 00.G1	WOOD PANELING	06 20 00
06 20 00.H1	WOOD STAIRS	06 20 00
06 20 00.H2	WOOD STAIR STRINGER	06 20 00
06 20 00.H3	WOOD STAIR HANDRAIL	06 20 00
06 20 00.H4	WOOD STAIR TREAD	06 20 00
06 20 00.H5	WOOD STAIR RISER	06 20 00
06 20 00.J1	WOOD SIDING	06 20 00
06 20 00.K1	WOOD SOFFIT	06 20 00
06 20 00.L1	FASCIA	06 20 00
06 20 00.M1	WOOD SHINGLES	06 20 00
06 20 00.N1	MISCELLANEOUS HARDWARE	06 20 00
06 20 00.P1	MISCELLANEOUS MEMBERS	06 20 00
06 20 00.Q1	HARDWOOD BENCH WITH ROUNDED EDGES	06 20 00
06 20 00.R1	HARDWOOD BUTCHERBLOCK COUNTERTOP	06 20 00
06 40 00	ARCHITECTURAL WOODWORK	Division 06
06 40 00.A1	PLACEHOLDER	06 40 00
06 41 16	LAMINATE CLAD ARCHITECTURAL CASEWORK	Division 06
06 41 16.A1	"LAMINATE CLAD BASE CABINET, DOUBLE DOOR, WITH ADJUSTABLE SHELF"	06 41 16
06 41 16.A2	"LAMINATE CLAD BASE CABINET, SINGLE DOOR, WITH ADJUSTABLE SHELF"	06 41 16
06 41 16.A3	"LAMINATE CLAD SINK BASE CABINET, DOUBLE DOOR"	06 41 16
06 41 16.A4	"LAMINATE CLAD 12"" DEEP BASE CABINET, DOUBLE DOOR, WITH ADJUSTABLE SHELF"	06 41 16
06 41 16.B1	LAMINATE CLAD DRAWER STACK	06 41 16
06 41 16.C1	"LAMINATE CLAD WALL CABINET, DOUBLE DOOR, WITH (2) ADJUSTABLE SHELVES"	06 41 16
06 41 16.C2	"LAMINATE CLAD WALL CABINET, SINGLE DOOR, WITH (2) ADJUSTABLE SHELVES"	06 41 16
06 41 16.C3	"LAMINATE CLAD WALL CABINET, DOUBLE DOOR"	06 41 16
06 41 16.D1	"LAMINATE CLAD TALL CABINET, DOUBLE DOOR, WITH (5) ADJUSTABLE SHELVES"	06 41 16
06 41 16.E1	LAMINATE CLAD FILLER PANEL	06 41 16
06 41 16.F1	LAMINATE CLAD BOX BOX FILE	06 41 16
06 41 16.G1	LAMINATE CLAD FILE FILE	06 41 16
06 41 16.H1	"LAMINATE CLAD 12"" DEEP OPEN SHELVING, WITH ADJUSTABLE SHELF"	06 41 16
06 50 00	STRUCTURAL PLASTIC	Division 06
06 50 00.A1	PLACEHOLDER	06 50 00
06 60 00	PLASTIC FABRICATIONS	Division 06
06 60 00.A1	PLACEHOLDER	06 60 00
06 61 16	SOLID POLYMER (SOLID SURFACING) FABRICATIONS	Division 06
06 61 16.A1	"SOLID POLYMER COUNTERTOP WITH 4"" BACKSPLASH"	06 61 16
06 61 16.A2	SOLID POLYMER COUNTERTOP	06 61 16
06 61 16.A3	SOLID POLYMER TRANSACTION TOP	06 61 16
06 61 16.B1	SOLID POLYMER BACKSPLASH	06 61 16
06 61 16.C1	SOLID POLYMER ENDSPLASH	06 61 16
06 61 16.D1	SOLID POLYMER SHELVING	06 61 16
06 61 16.E1	SOLID POLYMER WINDOW STOOLS	06 61 16
06 61 16.F1	"SOLID POLYMER VANITY TOP WITH INTEGRAL SINK AND 4"" BACKSPLASH"	06 61 16
06 61 16.G1	SOLID POLYMER SINK	06 61 16
06 61 16.H1	SOLID POLYMER SHOWER SURROUND	06 61 16
06 61 16.J1	SOLID POLYMER TUB/SHOWER SURROUND	06 61 16
06 61 16.K1	SOLID POLYMER WALL CLADDING	06 61 16
06 61 16.L1	SOLID POLYMER WAINSCOT	06 61 16
06 61 16.M1	SOLID POLYMER TOILET PARTITION	06 61 16
06 61 16.N1	SOLID POLYMER URINAL PARTITION	06 61 16
06 66 10	FIBER REINFORCED PLASTIC (FRP) FABRICATIONS	Division 06
06 66 10.A1	PLACEHOLDER	06 66 10
06 70 00	STRUCTURAL COMPOSITES	Division 06
06 70 00.A1	PLACEHOLDER	06 70 00
06 80 00	COMPOSITE FABRICATIONS	Division 06
06 80 00.A1	PLACEHOLDER	06 80 00
Division 07	THERMAL AND MOISTURE PROTECTION
07 01 00	OPERATION AND MAINTENANCE OF THERMAL AND MOISTURE PROTECTION	Division 07
07 01 00.A1	PLACEHOLDER	07 01 00
07 05 00	COMMON WORK RESULTS FOR THERMAL AND MOISTURE PROTECTION	Division 07
07 05 00.A1	PLACEHOLDER	07 05 00
07 06 00	SCHEDULES FOR THERMAL AND MOISTURE PROTECTION	Division 07
07 06 00.A1	PLACEHOLDER	07 06 00
07 08 00	COMMISSIONING OF THERMAL AND MOISTURE PROTECTION	Division 07
07 08 00.A1	PLACEHOLDER	07 08 00
07 10 00	DAMPPROOFING AND WATERPROOFING	Division 07
07 10 00.A1	PLACEHOLDER	07 10 00
07 11 13	BITUMINOUS DAMPPROOFING	Division 07
07 11 13.A1	PLACEHOLDER	07 11 13
07 13 53	ELASTOMERIC SHEET WATERPROOFING	Division 07
07 13 53.A1	NEOPRENE SHEET WATERPROOFING	07 13 53
07 13 53.B1	EPDM SHEET WATERPROOFING	07 13 53
07 13 53.C1	BITUMINOUS SHEET WATERPROOFING	07 13 53
07 14 00	FLUID APPLIED WATERPROOFING	Division 07
07 14 00.A1	BITUMINOUS WATERPROOFING	07 14 00
07 14 00.B1	PROTECTION BOARD	07 14 00
07 14 00.C1	15# FELT	07 14 00
07 14 00.D1	BASE SHEET	07 14 00
07 14 00.E1	SLIP SHEET	07 14 00
07 14 00.F1	ELASTOMERIC SHEET	07 14 00
07 19 00	WATER REPELLANTS	Division 07
07 19 00.A1	TRANSPARENT WATER REPELLENT	07 19 00
07 20 00	THERMAL PROTECTION	Division 07
07 20 00.A1	ROOF UNDERLAYMENT	07 20 00
07 21 13	BOARD AND BLOCK INSULATION	Division 07
07 21 13.A	RIGID INSULATION (R-36 MIN)	07 21 13
07 21 13.A01	"1"" RIGID INSULATION (R-6 MIN.)"	07 21 13
07 21 13.A02	"1-1/2"" RIGID INSULATION (R-9 MIN.)"	07 21 13
07 21 13.A03	"2"" RIGID INSULATION (R-12 MIN.)"	07 21 13
07 21 13.A04	"2-1/2"" RIGID INSULATION (R-15 MIN.)"	07 21 13
07 21 13.A05	"3"" RIGID INSULATION (R-18 MIN.)"	07 21 13
07 21 13.A06	"4"" RIGID INSULATION (R-24 MIN.)"	07 21 13
07 21 13.A07	"5"" RIGID INSULATION (R-30 MIN.)"	07 21 13
07 21 13.A08	"6"" RIGID INSULATION (R-36 MIN.)"	07 21 13
07 21 13.A09	"7"" RIGID INSULATION (R-42 MIN.)"	07 21 13
07 21 13.B1	CELLULAR GLASS RIGID INSULATION (THICKNESS OR R VALUE)	07 21 13
07 21 13.C01	EXTRUDED POLYSTYRENE INSULATION (THICKNESS OR R VALUE)	07 21 13
07 21 13.D01	MINERAL FIBER INSUL. BD (THICKNESS OR R VALUE)	07 21 13
07 21 13.E01	POLYURETHANE INSUL. BD (THICKNESS OR R VALUE)	07 21 13
07 21 13.F01	POLYISOCYANURATE INSUL. BD. (THICKNESS OR R VALUE)	07 21 13
07 21 13.G	PREMOLDED CMU INSERT INSULATION (THICKNESS OR R VALUE)	07 21 13
07 21 13.H	VAPOR RETARDER	07 21 13
07 21 13.J	INSULATION PROTECTION BD.	07 21 13
07 21 16	MINERAL FIBER BLANKET INSULATION	Division 07
07 21 16.A01	BLANKET INSULATION	07 21 16
07 21 16.A02	R-11 BLANKET INSULATION	07 21 16
07 21 16.A03	R-13 BLANKET INSULATION	07 21 16
07 21 16.A04	R-19 BLANKET INSULATION	07 21 16
07 21 16.A05	R-21 BLANKET INSULATION	07 21 16
07 21 16.A06	R-30 BLANKET INSULATION	07 21 16
07 21 16.A07	R-38 BLANKET INSULATION	07 21 16
07 21 16.B	SILL SEALER INSULATION	07 21 16
07 21 16.C	VAPOR RETARDER	07 21 16
07 21 16.D	SOUND ATTENUATION BLANKET INSULATION	07 21 16
07 21 16.E	SOUND ATTENUATION FIRE BLANKET INSULATION	07 21 16
07 21 19	FOAMED-IN-PLACE INSULATION	Division 07
07 21 19.A1	"1"" FOAM INSULATION"	07 21 19
07 21 19.A2	SPRAY POLYURETHANE FOAM INSULATION FOR AIR BARRIER	07 21 19
07 21 23	LOOSE FILL THERMAL INSULATION	Division 07
07 21 23.A1	PLACEHOLDER	07 21 23
07 22 00	ROOF AND DECK INSULATION	Division 07
07 22 00.A	EXPANDED PERLITE INSULATION BOARD	07 22 00
07 22 00.B	POLYISOCYANURATE INSULATION BOARD	07 22 00
07 22 00.C	CELLULAR GLASS INSULATION BOARD	07 22 00
07 22 00.D	POLYSTYRENE INSULATION BOARD	07 22 00
07 22 00.E	COMPOSITE INSULATION BOARD	07 22 00
07 22 00.F	WOOD FIBER INSULATION BOARD	07 22 00
07 22 00.G	MINERAL FIBER INSULATION BOARD	07 22 00
07 22 00.H	INSULATION BOARD	07 22 00
07 22 00.J	TAPERED INSULATION BOARD	07 22 00
07 22 00.K	CANT	07 22 00
07 22 00.L	CRICKET	07 22 00
07 22 00.M	PROTECTION BOARD	07 22 00
07 22 00.N	THERMAL BARRIER	07 22 00
07 22 00.P	VAPOR RETARDER	07 22 00
07 22 00.Q	FASTENER	07 22 00
07 24 00	EXTERIOR INSULATION AND FINISH SYSTEMS	Division 07
07 24 00.A1	PLACEHOLDER	07 24 00
07 27 10	AIR BARRIER	Division 07
07 27 10.A1	SELF-ADHERING RUBBERIZED ASPHALT SHEET AIR/VAPOR BARRIER CONTINUOUS OVER UNDERLAYMENT	07 27 10
07 27 10.B1	FLUID APPLIED AIR/VAPOR BARRIER	07 27 10
07 27 10.C1	FACTORY OR FLUID APPLIED AIR/VAPOR BARRIER	07 27 10
07 30 00	STEEP SLOPE ROOFING	Division 07
07 30 00.A1	PLACEHOLDER	07 30 00
07 31 00	ASPHALT SHINGLES	Division 07
07 31 00.A1	PLACEHOLDER	07 31 00
07 40 00	ROOFING AND SIDING PANELS	Division 07
07 40 00.A1	PLACEHOLDER	07 40 00
07 41 13	METAL ROOF PANELS	Division 07
07 41 13.A1	"METAL ROOF PANEL, STEEL"	07 41 13
07 41 13.B1	METAL ROOF PANEL. ALUMINUM	07 41 13
07 41 13.C1	MISCELLANEOUS PANEL FRAMING	07 41 13
07 41 13.C2	CONCEALED ATTACHMENT CLIP	07 41 13
07 41 13.D1	PANEL CLOSURE	07 41 13
07 41 13.D2	METAL CLOSURE STRIP	07 41 13
07 41 13.D3	RUBBER CLOSURE STRIP	07 41 13
07 41 13.E1	SEALANT	07 41 13
07 41 13.F1	UNDERLAYMENT	07 41 13
07 41 13.F2	FELT UNDERLAYMENT - NO.30	07 41 13
07 41 13.F3	SELF-ADHERING MODIFIED BITUMEN UNDERLAYMENT	07 41 13
07 41 13.F4	EPDM MEMBRANE UNDERLAYMENT	07 41 13
07 41 13.F5	SLIP SHEET	07 41 13
07 41 63	FABRICATED ROOF PANEL ASSEMBLIES	Division 07
07 41 63.A1	"STRUCTURAL METAL ROOF PANEL, STEEL"	07 41 63
07 41 63.B1	"STRUCTURAL METAL ROOF PANEL, ALUMINUM"	07 41 63
07 41 63.C1	INSULATED METAL ROOF PANEL (R-23 MIN) (X7) ON STEEL PURLINS	07 41 63
07 41 63.D1	"FOAM INSULATION CORE ROOF PANEL, ALUMINUM"	07 41 63
07 41 63.E1	PANEL CLOSURE	07 41 63
07 41 63.F1	PANEL FLASHING	07 41 63
07 41 63.G1	PANEL SEALANT	07 41 63
07 42 13	METAL WALL PANELS	Division 07
07 42 13.A1	"METAL WALL PANEL, STEEL"	07 42 13
07 42 13.A2	"METAL WALL PANEL, STEEL (INTERIOR LINER)"	07 42 13
07 42 13.B1	"METAL WALL PANEL, ALUMINUM"	07 42 13
07 42 13.C1	PANEL CLOSURE	07 42 13
07 42 13.D1	PANEL FLASHING	07 42 13
07 42 13.E1	PANEL SEALANT	07 42 13
07 42 63	FABRICATED WALL PANEL ASSEMBLIES	Division 07
07 42 63.A1	"STRUCTURAL METAL WALL PANEL, STEEL"	07 42 63
07 42 63.B1	"STRUCTURAL METAL WALL PANEL, ALUMINUM"	07 42 63
07 42 63.C1	INSULATED METAL WALL PANEL (R-16 MIN) (X1)	07 42 63
07 42 63.C2	INSULATED METAL PANEL (R-16 MIN) OVER 3/4" GLASS MAT GYPSUM SHEATHING OVER 6" STEEL STUD INFILLED WITH FIBERGLASS BATT INSULATION (R-13 MIN) AND 3/4" GYPSUM WALL BOARD, TYPE-X	07 42 63
07 42 63.C3	INSULATED METAL PANEL (R-16 MIN) OVER 5/8" GLASS MAT GYPSUM SHEATHING OVER 6" STEEL STUD INFILLED WITH FIBERGLASS BATT INSULATION (R-13 MIN) AND 5/8" GYPSUM WALL BOARD, TYPE-X	07 42 63
07 42 63.D1	"FOAM INSULATION CORE WALL PANEL, ALUMINUM"	07 42 63
07 42 63.E1	BASE FLASHING PER MANUFACTURER	07 42 63
07 42 63.F1	PANEL FLASHING	07 42 63
07 42 63.G1	PANEL SEALANT	07 42 63
07 50 00	MEMBRANE ROOFING	Division 07
07 50 00.A1	"FELT BACKED PVC ROOFING, FULLY ADHERED (80 MIL) (X14)"	07 50 00
07 50 00.A2	"FELT BACKED PVC ROOFING, FULLY ADHERED (80 MIL) OVER 1/2"" COVERBOARD OVER 5"" RIGID INSULATION (R-30 MIN.) OVER SELF-ADHERING RUBBERIZED ASPHALT SHEET MEMBRANE ON 1/2"" UNDERLAYMENT OVER 1-1/2"" METAL DECKING (X14)"	07 50 00
07 50 00.A3	"FELT BACKED PVC ROOFING, FULLY ADHERED (80 MIL) (X14) WRAPPING OVER TOP OF PARAPET"	07 50 00
07 50 00.B1	PVC BASE FLASHING MEMBRANE (80 MIL) (X14)	07 50 00
07 50 00.C1	"TAPERED INSULATION CRICKET SLOPED AT 1/2"" : 1'-0"", TYP"	07 50 00
07 50 00.D1	"PVC FLASHING MEMBRANE SPLASH PAD, HOT AIR WELDED TO PVC MEMBRANE ROOF (X14)"	07 50 00
07 50 00.E1	PVC MEMBRANE BONDING ADHESIVE	07 50 00
07 51 13	BUILT-UP ASPHALT ROOFING	Division 07
07 51 13.A1	PLACEHOLDER	07 51 13
07 52 00	MODIFIED BITUMINOUS MEMBRANE ROOFING	Division 07
07 52 00.A1	PLACEHOLDER	07 52 00
07 53 23	ETHYLENE-PROPYLENE-DIENE-MONOMER (EPDM) ROOFING	Division 07
07 53 23.A1	EPDM ROOFING	07 53 23
07 53 23.A2	"EPDM ROOFING, FULLY ADHERED (THICKNESS)"	07 53 23
07 53 23.A3	"EPDM ROOFING, MECHANICALLY ATTACHED (THICKNESS)"	07 53 23
07 53 23.A4	"EPDM ROOFING, BALLASTED (THICKNESS)"	07 53 23
07 53 23.B1	MEMBRANE FLASHING (THICKNESS)	07 53 23
07 53 23.C1	MEMBRANE FASTENER AND PLATE	07 53 23
07 53 23.D1	STONE BALLAST	07 53 23
07 53 23.D2	PAVER BALLAST	07 53 23
07 53 23.E1	PROTECTION MAT	07 53 23
07 53 23.E2	WALKWAY MAT	07 53 23
07 53 23.E3	PREFABRICATED CURB	07 53 23
07 53 23.E4	PREFABRICATED EXPANSION JOINT	07 53 23
07 53 23.E5	EPDM FLASHING	07 53 23
07 60 00	FLASHING AND SHEET METAL	Division 07
07 60 00.A1	GUTTER (SIZE)	07 60 00
07 60 00.A2	GUTTER HANGER	07 60 00
07 60 00.A3	GUTTER (6"" W X 5"" D) (X15)"	07 60 00
07 60 00.A4	GUTTER (6" W X 6" D) (X3)	07 60 00
07 60 00.A5	"GUTTER (5" W X 5" D)	07 60 00
07 60 00.B1	DOWNSPOUT	07 60 00
07 60 00.B2	DOWNSPOUT HANGER	07 60 00
07 60 00.B3	"DOWNSPOUT (4"" X 3"") TO CAST IRON DOWNSPOUT BOOT (X8)"	07 60 00
07 60 00.B4	DOWNSPOUT (4" X 3") (X3) DISCHARGING TO CONCRETE SPLASH BLOCK	07 60 00
07 60 00.B5	CONDUCTOR HEAD (X8)	07 60 00
07 60 00.B6	METAL SPLASH PAN	07 60 00
07 60 00.C1	PERFORATED METAL SOFFIT PANEL (X3)	07 60 00
07 60 00.C2	LINEAR METAL SOFFIT PANEL (X7)	07 60 00
07 60 00.D1	SCUPPER (X8)	07 60 00
07 60 00.E1	ALUMINUM WALL TO WALL EXPANSION JOINT COVER	07 60 00
07 60 00.E2	ALUMINUM FLOOR TO FLOOR EXPANSION JOINT COVER WITH ELASTOMERIC GASKET	07 60 00
07 60 00.E3	ALUMINUM FLOOR TO WALL EXPANSION JOINT COVER WITH ELASTOMERIC GASKET	07 60 00
07 60 00.F1	FLASHING	07 60 00
07 60 00.F2	INSULATED METAL PANEL BASE FLASHING (X8)	07 60 00
07 60 00.F3	COUNTERFLASHING	07 60 00
07 60 00.F4	REGLET FLASHING	07 60 00
07 60 00.F5	VALLEY FLASHING	07 60 00
07 60 00.F6	EAVE FLASHING (X15)	07 60 00
07 60 00.F7	RAKE FLASHING (X15)	07 60 00
07 60 00.F8	RIDGE CAP (X15)	07 60 00
07 60 00.F9	"RIDGE FLASHING, VENTED"	07 60 00
07 60 00.F10	CONTINUOUS CLEAT COPING (X8)	07 60 00
07 60 00.F11	DRIP EDGE FLASHING	07 60 00
07 60 00.F12	STEPPED FLASHING	07 60 00
07 60 00.G1	GRAVEL STOP	07 60 00
07 60 00.H1	METAL FASCIA (X3) OVER PLYWOOD	07 60 00
07 60 00.J1	SCUPPER BOX (X8)	07 60 00
07 60 00.K1	FIELD FABRICATED METAL ROOFING	07 60 00
07 60 00.K2	STANDING SEAM ROOFING	07 60 00
07 60 00.K3	FLAT SEAM ROOFING	07 60 00
07 60 00.L1	FIELD FABRICATED JOINT	07 60 00
07 60 00.L2	ROOF EXPANSION JOINT	07 60 00
07 60 00.L3	FLOOR EXPANSION JOINT	07 60 00
07 60 00.L4	WALL EXPANSION JOINT	07 60 00
07 61 14	STEEL STANDING SEAM ROOFING	Division 07
07 61 14.A1	STANDING SEAM METAL ROOF PANELS (X2)	07 61 14
07 61 14.B1	CONCEALED ATTACHMENT CLIP	07 61 14
07 61 14.C1	CONFORMAL CLOSURE STRIP	07 61 14
07 61 14.D1	FASTENER	07 61 14
07 61 14.E1	ELASTOMERIC SEALANT	07 61 14
07 61 14.F1	STANDING SEAM METAL ROOF PANELS (X2) OVER 1/2" COVERBOARD OVER 6" RIGID INSULATION (R-36 MIN.) OVER SELF-ADHERING RUBBERIZED ASPHALT SHEET AIR/VAPOR BARRIER ON 1/2" UNDERLAYMENT OVER 1-1/2" ACOUSTICAL METAL DECK CEILING SYSTEM	07 61 14
07 61 14.F2	STANDING SEAM METAL ROOF PANELS (X2) OVER 1/2" COVERBOARD OVER 2" RIGID INSULATION (R-12 MIN.) OVER SELF-ADHERING RUBBERIZED ASPHALT SHEET MEMBRANE ON 1/2" UNDERLAYMENT OVER 1-1/2" METAL DECKING	07 61 14
07 61 14.F3	STANDING SEAM METAL ROOF PANELS (X2) OVER 1/2" UNDERLAYMENT OVER 1-1/2" METAL DECKING	07 61 14
07 70 00	ROOF AND WALL SPECIALTIES AND ACCESSORIES	Division 07
07 70 00.A	ROOF HATCH	07 70 00
07 70 00.A1	"ROOF HATCH, 2'-6"" X 3'-0"" "	07 70 00
07 70 00.A2	"ROOF HATCH, 2'-6"" X 4'-0"" "	07 70 00
07 72 00	ROOF VENTILATORS	Division 07
07 72 00.A1	PLACEHOLDER	07 72 00
07 72 50	FALL PROTECTION ANCHORS	Division 07
07 72 50.A1	FALL PROTECTION ANCHOR	07 72 50
07 80 00	FIRE AND SMOKE PROTECTION	Division 07
07 80 00.A1	PLACEHOLDER	07 80 00
07 81 00	SPRAY-APPLIED FIREPROOFING	Division 07
07 81 00.A1	PLACEHOLDER	07 81 00
07 84 00	FIRESTOPPING	Division 07
07 84 00.A1	FIRESTOPPING	07 84 00
07 84 00.A2	"FIRESTOPPING, F RATING=1 HOUR"	07 84 00
07 84 00.A3	"FIRESTOPPING, F RATING=2 HOURS"	07 84 00
07 84 00.A4	SPRAY APPLIED OR FLUTE INSERT FIRESTOPPING	07 84 00
07 90 00	JOINT PROTECTION	Division 07
07 90 00.A1	PLACEHOLDER	07 90 00
07 92 00	JOINT SEALANTS	Division 07
07 92 00.A1	INTERIOR SEALANT	07 92 00
07 92 00.B1	EXTERIOR SEALANT	07 92 00
07 92 00.D1	FLOOR JOINT SEALANT	07 92 00
07 92 00.D2	ACOUSTICAL SEALANT	07 92 00
07 92 00.E1	PREFORMED SEALANT	07 92 00
07 92 00.E2	PREFORMED TAPE SEALANT	07 92 00
07 92 00.E3	PREFORMED BEAD SEALANT	07 92 00
07 92 00.E4	PREFORMED FOAM STRIP SEALANT	07 92 00
07 92 00.F1	CAULK	07 92 00
07 92 00.G1	BACKSTOPS AND BACKER ROD	07 92 00
07 92 00.H1	PRE-COMPRESSED POLYURETHANE FOAM EXPANSION JOINT SEAL	07 92 00
Division 08	OPENINGS
08 01 00	OPERATION AND MAINTENANCE OF OPENINGS	Division 08
08 01 00.A1	PLACEHOLDER	08 01 00
08 05 00	COMMON WORK RESULTS FOR OPENINGS	Division 08
08 05 00.A1	PLACEHOLDER	08 05 00
08 06 00	SCHEDULES FOR OPENINGS	Division 08
08 06 00.A1	PLACEHOLDER	08 06 00
08 08 00	COMMISSIONING OF OPENINGS	Division 08
08 08 00.A1	PLACEHOLDER	08 08 00
08 10 00	DOORS AND FRAMES	Division 08
08 10 00.A1	PLACEHOLDER	08 10 00
08 11 13	STEEL DOORS AND FRAMES	Division 08
08 11 13.A1	HOLLOW METAL FRAME	08 11 13
08 11 13.A2	"HOLLOW METAL FRAME, KNOCK DOWN"	08 11 13
08 11 13.A3	"HOLLOW METAL FRAME, WELDED"	08 11 13
08 11 13.B1	HOLLOW METAL DOOR	08 11 13
08 11 13.C1	INSULATED METAL DOOR (X5)	08 11 13
08 11 13.D1	SOUND RATED METAL DOOR	08 11 13
08 11 13.E1	FIRE RATED METAL DOOR	08 11 13
08 11 13.F1	SMOKE RATED METAL DOOR	08 11 13
08 11 13.G1	JAMB ANCHOR	08 11 13
08 11 13.H1	GROUT-FILL HOLLOW METAL FRAME	08 11 13
08 11 13.J1	WEATHERSTRIPPING	08 11 13
08 11 16	ALUMINUM DOORS AND FRAMES	Division 08
08 11 16.A1	"ALUMINUM DOOR, FLUSH"	08 11 16
08 11 16.B1	"ALUMINUM DOOR, FULL GLAZED, STYLE AND RAIL (X9)"	08 11 16
08 11 16.C1	ALUMINUM DOOR FRAME	08 11 16
08 14 00	WOOD DOORS	Division 08
08 14 00.A1	"WOOD DOOR, STYLE AND RAIL"	08 14 00
08 14 00.B1	"WOOD DOOR, FLUSH, SOLID CORE"	08 14 00
08 14 00.C1	"WOOD DOOR, FLUSH, HOLLOW CORE"	08 14 00
08 14 00.D1	"WOOD DOOR, BI-FOLD"	08 14 00
08 14 00.E1	"WOOD DOOR, SLIDING"	08 14 00
08 14 00.F1	"WOOD DOOR, ACOUSTICAL"	08 14 00
08 14 00.G1	"WOOD DOOR, COMPOSITE FIRE DOOR"	08 14 00
08 30 00	SPECIALTY DOORS AND FRAMES	Division 08
08 30 00.A1	PLACEHOLDER	08 30 00
08 33 13	METAL ROLLING COUNTER DOORS	Division 08
08 33 13.A1	PLACEHOLDER	08 33 13
08 33 23	OVERHEAD COILING DOORS	Division 08
08 33 23.A1	"OVERHEAD COILING DOOR, ALUMINUM"	08 33 23
08 33 23.B1	"OVERHEAD COILING DOOR, STEEL"	08 33 23
08 33 23.C1	"OVERHEAD COILING DOOR, STAINLESS STEEL"	08 33 23
08 33 23.D1	"OVERHEAD COILING DOOR, VISION PANEL"	08 33 23
08 33 23.E1	"OVERHEAD COILING DOOR, TRACK"	08 33 23
08 33 23.F1	"OVERHEAD COILING DOOR, MOTOR OPERATOR"	08 33 23
08 33 23.G1	"OVERHEAD COILING DOOR, HOOD"	08 33 23
08 33 23.H1	"OVERHEAD COILING DOOR, INSULATED CORE ALUMINUM WITH VISION PANELS (X11)"	08 33 23
08 34 59	VAULT DOORS AND DAY GATES	Division 08
08 34 59.A1	VAULT DOOR	08 34 59
08 34 59.B1	DAY GATE	08 34 59
08 36 13	SECTIONAL OVERHEAD DOORS	Division 08
08 36 13.A1	"OVERHEAD SECTIONAL DOOR, ALUMINUM"	08 36 13
08 36 13.B1	"OVERHEAD SECTIONAL DOOR, STEEL"	08 36 13
08 36 13.C1	"OVERHEAD SECTIONAL DOOR, TRACK"	08 36 13
08 36 13.D1	"OVERHEAD SECTIONAL DOOR, MOTOR OPERATOR"	08 36 13
08 41 13	ALUMINUM FRAMED ENTRANCES AND STOREFRONTS	Division 08
08 41 13.A1	ALUMINUM STOREFRONT DOOR, WIDE STILE	08 41 13
08 44 00	CURTAIN WALL AND GLAZED ASSEMBLIES	Division 08
08 44 00.A1	ALUMINUM CURTAIN WALL ASSEMBLY INCLUDING HOPPER WINDOWS WITH INSULATED GLAZING AND FIXED WINDOWS WITH INSULATED SPANDREL GLAZING	08 44 00
08 45 23	TRANSLUCENT FIBERGLASS PANEL WALL ASSEMBLY	Division 08
08 45 23.A1	TRANSLUCENT FIBERGLASS WALL PANEL (X12)	08 45 23
08 45 23.B1	ALUMINUM PANEL FRAME	08 45 23
08 45 45	TRANSLUCENT FIBERGLASS PANEL SKYLIGHT SYSTEM	Division 08
08 45 45.A1	TRANSLUCENT FIBERGLASS SKYLIGHT	08 45 45
08 45 45.B1	TRANSLUCENT FIBERGLASS RIDGE SKYLIGHT	08 45 45
08 45 45.C1	ALUMINUM PANEL FRAME	08 45 45
08 50 00	WINDOWS	Division 08
08 50 00.A1	PLACEHOLDER	08 50 00
08 51 13	ALUMINUM WINDOWS	Division 08
08 51 13.A1	ALUMINUM WINDOW UNIT (X3)	08 51 13
08 51 13.B1	"ALUMINUM WINDOW, CASEMENT "	08 51 13
08 51 13.C1	"ALUMINUM WINDOW, SINGLE HUNG "	08 51 13
08 51 13.D1	"ALUMINUM WINDOW, DOUBLE HUNG "	08 51 13
08 51 13.E1	"ALUMINUM WINDOW, HORIZONTAL SLIDING "	08 51 13
08 51 13.F1	"ALUMINUM WINDOW, PROJECTED "	08 51 13
08 51 13.G1	"ALUMINUM WINDOW, TOP HINGED "	08 51 13
08 51 13.H1	"ALUMINUM WINDOW, VERTICAL PIVOT "	08 51 13
08 51 13.J1	"ALUMINUM WINDOW, FIXED (X4)"	08 51 13
08 51 13.K1	ALUMINUM WINDOW MULLION	08 51 13
08 51 13.L1	ALUMINUM WINDOW MUNTIN	08 51 13
08 51 13.M1	ALUMINUM INSECT SCREEN	08 51 13
08 51 13.N1	ALUMINUM SILL	08 51 13
08 51 23	STEEL WINDOWS	Division 08
08 51 23.A1	PLACEHOLDER	08 51 23
08 52 00	WOOD WINDOWS	Division 08
08 52 00.A1	ALUMINUM CLAD WOOD WINDOW	08 52 00
08 52 00.B1	VINYL CLAD WOOD WINDOW	08 52 00
08 52 00.C1	FIXED WINDOW	08 52 00
08 52 00.D1	AWNING / HOPPER WINDOW	08 52 00
08 52 00.E1	CASEMENT WINDOW	08 52 00
08 52 00.F1	DOUBLE HUNG WINDOW	08 52 00
08 52 00.G1	SINGLE HUNG WINDOW	08 52 00
08 52 00.H1	HORIZONTAL SLIDING WINDOW	08 52 00
08 52 00.J1	BAY WINDOW	08 52 00
08 60 00	ROOF WINDOWS AND SKYLIGHTS	Division 08
08 60 00.A1	PLACEHOLDER	08 60 00
08 62 00	SKYLIGHTS	Division 08
08 62 00.A1	PLACEHOLDER	08 62 00
08 62 50	TUBULAR DAYLIGHTING DEVICE	Division 08
08 62 50.A1	TUBULAR DAYLIGHTING DEVICE	08 62 50
08 62 50.B1	ROOF DOME ASSEMBLY	08 62 50
08 62 50.C1	FLASHING ASSEMBLY	08 62 50
08 62 50.D1	REFLECTIVE EXTENSION TUBE	08 62 50
08 62 50.E1	CEILING RING AND DIFFUSER	08 62 50
08 62 50.F1	DIMMER CONTROL	08 62 50
08 70 00	HARDWARE	Division 08
08 70 00.A1	PLACEHOLDER	08 70 00
08 71 00	DOOR HARDWARE	Division 08
08 71 00.A1	HINGE	08 71 00
08 71 00.B1	LOCKSET	08 71 00
08 71 00.C1	EXIT DEVICE	08 71 00
08 71 00.D1	DOOR BOLT	08 71 00
08 71 00.E1	CLOSER	08 71 00
08 71 00.F1	OVERHEAD HOLDER	08 71 00
08 71 00.G1	LOCKSET	08 71 00
08 71 00.H1	PROTECTION PLATE	08 71 00
08 71 00.H2	ARMOR PLATE	08 71 00
08 71 00.H3	KICK PLATE	08 71 00
08 71 00.H4	MOP PLATE	08 71 00
08 71 00.J1	DOOR STOP	08 71 00
08 71 00.K1	WEATHERSTRIPPING	08 71 00
08 71 00.L1	GASKETING	08 71 00
08 71 00.M1	THRESHOLD	08 71 00
08 71 00.N1	KEY CABINET	08 71 00
08 81 00	GLAZING	Division 08
08 81 00.A1	ANNEALED GLASS	08 81 00
08 81 00.A2	"1/4"" CLEAR ANNEALED GLASS"	08 81 00
08 81 00.A3	"1/4"" TINTED ANNEALED GLASS"	08 81 00
08 81 00.B1	HEAT ABSORBING GLASS	08 81 00
08 81 00.C1	WIRED GLASS	08 81 00
08 81 00.D1	PATTERNED GLASS	08 81 00
08 81 00.E1	LAMINATED GLASS	08 81 00
08 81 00.F1	BULLET RESISTING GLASS	08 81 00
08 81 00.G1	TEMPERED GLASS	08 81 00
08 81 00.G2	"1/4"" CLEAR TEMPERED GLASS"	08 81 00
08 81 00.G3	"1/4"" TINTED TEMPERED GLASS"	08 81 00
08 81 00.H1	HEAT STRENGTHENED GLASS	08 81 00
08 81 00.J1	SPANDREL GLASS	08 81 00
08 81 00.K1	FIRE PROTECTIVE GLASS	08 81 00
08 81 00.L1	TINTED GLASS	08 81 00
08 81 00.M1	INSULATED GLASS UNIT	08 81 00
08 81 00.M2	"INSULATED GLASS UNIT, 1"" THICK"	08 81 00
08 81 00.M3	"INSULATED GLASS UNIT, BLAST RESISTANT, 1"" THICK"	08 81 00
08 81 00.N1	CONTROL TOWER GLAZING	08 81 00
08 81 00.P1	ACRYLIC GLAZING	08 81 00
08 81 00.Q1	POLCARBONATE GLAZING	08 81 00
08 81 00.R1	BULLET-RESISTANT PLASTIC GLAZING	08 81 00
08 81 00.S1	SEALANT	08 81 00
08 81 00.S2	ELASTOMERIC SEALANT	08 81 00
08 81 00.S3	STRUCTURAL SEALANT	08 81 00
08 91 00	METAL LOUVERS	Division 08
08 91 00.A1	EXTRUDED ALUMINUM WALL LOUVER	08 91 00
08 91 00.B1	FORMED METAL WALL LOUVER	08 91 00
08 91 00.C1	EXTRUDED ALUMINUM DOOR LOUVER	08 91 00
08 91 00.D1	FORMED METAL DOOR LOUVER	08 91 00
08 91 00.E1	COMPOUND LOUVER AND DAMPER UNIT	08 91 00
08 91 00.F1	PREFORMED VENT	08 91 00
08 91 00.G1	INSECT SCREEN	08 91 00
08 91 00.H1	BIRD SCREEN	08 91 00
Division 09	FINISHES
09 01 00	MAINTENANCE OF FINISHES	Division 09
09 01 00.A1	PLACEHOLDER	09 01 00
09 05 00	COMMON WORK RESULTS FOR FINISHES	Division 09
09 05 00.A1	PLACEHOLDER	09 05 00
09 06 00	SCHEDULES FOR FINISHES	Division 09
09 06 00.A1	PLACEHOLDER	09 06 00
09 08 00	COMMISSIONING OF FINISHES	Division 09
09 08 00.A1	PLACEHOLDER	09 08 00
09 20 00	PLASTER AND GYPSUM BOARD	Division 09
09 20 00.A1	PLACEHOLDER	09 20 00
09 22 00	SUPPORTS FOR PLASTER AND GYPSUM BOARD	Division 09
09 22 00.A1	SUSPENDED PLASTER CEILING SUPPORTS	09 22 00
09 22 00.A2	METAL CHANNELS	09 22 00
09 22 00.A3	METAL FURRING	09 22 00
09 22 00.B1	FURRED PLASTER CEILING SUPPORTS	09 22 00
09 22 00.B2	METAL CHANNELS	09 22 00
09 22 00.B3	METAL FURRING	09 22 00
09 22 00.C1	FURRED PLASTER WALL SUPPORTS	09 22 00
09 22 00.C2	METAL CHANNELS	09 22 00
09 22 00.C3	METAL FURRING	09 22 00
09 22 00.D1	NON-LOADBEARING PLASTER WALL SUPPORTS	09 22 00
09 22 00.D2	METAL CHANNELS	09 22 00
09 22 00.D3	METAL STUDS	09 22 00
09 22 00.E1	SUSPENDED GYPSUM BOARD CEILING SUPPORTS	09 22 00
09 22 00.E2	METAL CHANNELS	09 22 00
09 22 00.E3	METAL FURRING	09 22 00
09 22 00.F1	FURRED GYPSUM BOARD CEILING SUPPORTS	09 22 00
09 22 00.F2	METAL CHANNELS	09 22 00
09 22 00.F3	METAL FURRING	09 22 00
09 22 00.G1	FURRED GYPSUM BOARD WALL SUPPORTS	09 22 00
09 22 00.G2	METAL CHANNELS	09 22 00
09 22 00.G3	METAL FURRING	09 22 00
09 22 00.H1	NON-LOADBEARING GYPSUM BOARD WALL SUPPORTS	09 22 00
09 22 00.H2	METAL CHANNELS	09 22 00
09 22 00.H3	METAL STUDS	09 22 00
09 22 00.J1	Z FURRING	09 22 00
09 22 00.J2	"METAL Z FURRING, 26 GA, 1"" DEPTH"	09 22 00
09 26 00	VENEER PLASTER	Division 09
09 26 00.A1	PLACEHOLDER	09 26 00
09 29 00	GYPSUM BOARD	Division 09
09 29 50.A1	GYPSUM BOARD	09 29 00
09 29 50.A2	"GYPSUM BOARD, REGULAR, 1/2"""	09 29 00
09 29 50.A3	"GYPSUM BOARD, REGULAR, 5/8"""	09 29 00
09 29 50.A4	"GYPSUM BOARD, FOIL BACKED, 1/2"""	09 29 00
09 29 50.A5	"GYPSUM BOARD, FOIL BACKED, 5/8"""	09 29 00
09 29 50.A6	"GYPSUM BOARD, TYPE-X, 1/2"""	09 29 00
09 29 50.A7	5/8" GYPSUM BOARD, TYPE-X	09 29 00
09 29 50.A8	5/8"" GYPSUM BOARD, TYPE-X, EACH SIDE, OVER 3-5/8" STEEL STUD FRAMING AT 16"" O.C.	09 29 00
09 29 50.A9	5/8" GYPSUM BOARD, TYPE-X, OVER 3-5/8" STEEL STUD FRAMING AT 16" O.C. INFILLED WITH FIBERGLASS INSULATION (R-13 MIN.)	09 29 00
09 29 50.A10	(2) LAYERS 5/8" GYPSUM BOARD, TYPE-X, EACH SIDE, OVER 3-5/8" STEEL STUD FRAMING AT 16" O.C. (2HR, UL U419)	09 29 00
09 29 50.A11	(2) LAYERS 5/8" GYPSUM BOARD, TYPE-X, EACH SIDE, OVER 1-5/8" STEEL STUD FRAMING AT 16" O.C. (2HR, UL U419)	09 29 00
09 29 50.A12	(2) LAYERS 5/8" GYPSUM BOARD, TYPE-X, EACH SIDE, OVER 2-1/2" STEEL STUD FRAMING AT 16" O.C. (2HR, UL U419)	09 29 00
09 29 50.A13	(2) LAYERS 5/8" GYPSUM BOARD, TYPE-X, EXTERIOR SIDE OVER 4" STEEL C-H STUD FRAMING AT 16" O.C. WITH 1" GYPSUM SHAFTWALL LINER PANEL, INTERIOR SIDE (2HR, UL U415)	09 29 00
09 29 50.A14	5/8" GYPSUM BOARD, TYPE-X, OVER 6" STEEL STUD FRAMING AT 16" O.C. INFILLED WITH FIBERGLASS INSULATION (R-13 MIN.)	09 29 00
09 29 50.A15	(2) LAYERS 5/8" GYPSUM BOARD, TYPE-X	09 29 00
09 29 50.B1	GYPSUM BACKING BOARD	09 29 00
09 29 50.B2	"GYPSUM BACKING BOARD, REGULAR, 1/2"""	09 29 00
09 29 50.B3	"GYPSUM BACKING BOARD, REGULAR, 5/8"""	09 29 00
09 29 50.B4	"GYPSUM BACKING BOARD, FOIL BACKED, 1/2"""	09 29 00
09 29 50.B5	"GYPSUM BACKING BOARD, FOIL BACKED, 5/8"""	09 29 00
09 29 50.B6	"GYPSUM BACKING BOARD, TYPE-X, 1/2"""	09 29 00
09 29 50.B7	"GYPSUM BACKING BOARD, TYPE-X, 5/8"""	09 29 00
09 29 50.C1	WATER RESISTANT GYPSUM BACKING BOARD	09 29 00
09 29 50.C2	"WR GYPSUM BACKING BOARD, REGULAR, 1/2"""	09 29 00
09 29 50.C3	"WR GYPSUM BACKING BOARD, REGULAR, 5/8"""	09 29 00
09 29 50.C4	"WR GYPSUM BACKING BOARD, TYPE-X, 1/2"""	09 29 00
09 29 50.C5	"WR GYPSUM BACKING BOARD, TYPE-X, 5/8"""	09 29 00
09 29 50.D1	GLASS MAT WR GYPSUM TILE BACKING BOARD	09 29 00
09 29 50.D2	"GLASS MAT WR GYPSUM TILE BB, REGULAR, 1/2"""	09 29 00
09 29 50.D3	"GLASS MAT WR GYPSUM TILE BB, REGULAR, 5/8"""	09 29 00
09 29 50.D4	"GLASS MAT WR GYPSUM TILE BB, TYPE-X, 1/2"""	09 29 00
09 29 50.D5	"GLASS MAT WR GYPSUM TILE BB, TYPE-X, 5/8"""	09 29 00
09 29 50.E1	"GLASS MAT GYPSUM SHEATHING COVERBOARD, 1/2"""	09 29 00
09 29 50.E2	"GLASS MAT GYPSUM SHEATHING UNDERLAYMENT, 1/2"" "	09 29 00
09 29 50.E3	"GLASS MAT GYPSUM SHEATHING, 5/8"""	09 29 00
09 29 50.E4	"5/8"" GLASS MAT GYPSUM SHEATHING WITH FACTORY OR FLUID APPLIED VAPOR/AIR BARRIER WITH ALL JOINTS TAPED/SEALED"	09 29 00
09 29 50.F1	IMPACT RESISTANT GYPSUM BOARD	09 29 00
09 29 50.F2	"IMPACT RESISTANT GYPSUM BOARD, 1/2"""	09 29 00
09 29 50.F3	"IMPACT RESISTANT GYPSUM BOARD, 5/8"""	09 29 00
09 29 50.G1	PREDECORATED GYPSUM BOARD	09 29 00
09 29 50.G2	"PREDECORATED GYPSUM BOARD, REGULAR, 1/2"""	09 29 00
09 29 50.G3	"PREDECORATED GYPSUM BOARD, REGULAR, 5/8"""	09 29 00
09 29 50.G4	"PREDECORATED GYPSUM BOARD, TYPE-X, 1/2"""	09 29 00
09 29 50.G5	"PREDECORATED GYPSUM BOARD, TYPE-X, 5/8"""	09 29 00
09 29 50.H1	CEMENTITIOUS BACKER UNIT	09 29 00
09 29 50.H2	"CEMENTITIOUS BACKER UNIT, 1/2"""	09 29 00
09 29 50.H3	"CEMENTITIOUS BACKER UNIT, 5/8"""	09 29 00
09 29 50.J1	GYPSUM SHAFTWALL LINER PANEL	09 29 00
09 29 50.J2	"GYPSUM SHAFTWALL LINER PANEL, 1"""	09 29 00
09 29 50.J3	"GYPSUM SHAFTWALL LINER PANEL, 3/4"""	09 29 00
09 29 50.K1	METAL TRIM	09 29 00
09 29 50.K2	METAL CORNER BEAD	09 29 00
09 29 50.K3	"METAL ""J"" TRIM"	09 29 00
09 29 50.K4	METAL DRYWALL CONTROL JOINT	09 29 00
09 29 50.K5	METAL DRYWALL EXPANSION JOINT	09 29 00
09 30 00	"CERAMIC TILE, QUARRY TILE, AND PAVER TILE"	Division 09
09 30 00.A1	CERAMIC MOSAIC TILE	09 30 00
09 30 00.A2	"CERAMIC MOSAIC TILE, 1 X 1, CT-1"	09 30 00
09 30 00.B1	GLAZED CERAMIC TILE	09 30 00
09 30 00.C1	QUARRY TILE	09 30 00
09 30 00.D1	PORCELAIN TILE	09 30 00
09 30 00.E1	PAVER TILE	09 30 00
09 30 00.F1	STONE TILE	09 30 00
09 30 00.G1	MARBLE THRESHOLD	09 30 00
09 30 00.H1	TILE ACCESSORIES	09 30 00
09 30 00.H2	RECESSED SOAP HOLDER	09 30 00
09 30 00.H3	RECESSED SOAP HOLDER AND HAND HOLD	09 30 00
09 30 00.J1	MORTAR	09 30 00
09 30 00.K1	GROUT	09 30 00
09 30 00.L1	ADHESIVE	09 30 00
09 30 00.M1	SETTING BED	09 30 00
09 30 00.N1	METAL LATH	09 30 00
09 30 00.P1	WIRE REINFORCEMENT	09 30 00
09 30 00.Q1	CEMENTITIOUS BACKER BOARD	09 30 00
09 30 00.R1	GLASS MAT GYPSUM BACKER PANEL	09 30 00
09 30 00.S1	MEMBRANE	09 30 00
09 30 00.T1	TILE COUNCIL OF AMERICA (TCA) ASSEMBLY	09 30 00
09 50 00	CEILINGS	Division 09
09 50 00.A1	PLACEHOLDER	09 50 00
09 51 00	ACOUSTICAL CEILINGS	Division 09
09 51 00.A1	EXPOSED GRID UNITS	09 51 00
09 51 00.A2	"ACOUSTIC CEILING TILE, 24"" X 24"""	09 51 00
09 51 00.A3	"ACOUSTIC CEILING TILE, 2X2 (ACT-2)"	09 51 00
09 51 00.A4	"ACOUSTIC CEILING TILE, 2X4 (ACT-1)"	09 51 00
09 51 00.A5	"ACOUSTIC CEILING TILE, 2X4 (ACT-2)"	09 51 00
09 51 00.B1	CONCEALED GRID UNITS	09 51 00
09 51 00.C1	METAL PAN UNITS	09 51 00
09 51 00.D1	IMPACT/ABRASION RESISTANT UNITS	09 51 00
09 51 00.E1	HUMIDITY RESISTANT COMPOSITION UNITS	09 51 00
09 51 00.F1	METAL FACED COMPOSITION UNITS	09 51 00
09 51 00.G1	SUSPENSION SYSTEM	09 51 00
09 51 00.H1	HANGERS	09 51 00
09 51 00.J1	ACCESS PANELS	09 51 00
09 51 00.K1	SUSPENDED WOOD SLAT CEILING SYSTEM	09 51 00
09 51 00.L1	SUSPENDED METAL SLAT CEILING SYSTEM	09 51 00
09 51 00.M1	ACOUSTICAL SEALANT	09 51 00
09 60 00	FLOORING	Division 09
09 60 00.A1	PLACEHOLDER	09 60 00
09 65 00	RESILIENT FLOORING	Division 09
09 65 00.A1	VINYL COMPOSITION TILE	09 65 00
09 65 00.B1	SHEET VINYL FLOORING	09 65 00
09 65 00.C1	RUBBER TILE	09 65 00
09 65 00.D1	RUBBER SHEET FLOORING	09 65 00
09 65 00.E1	SOLID VINYL TILE	09 65 00
09 65 00.F1	SHEET LINOLEUM	09 65 00
09 65 00.G1	LINOLEUM TILE	09 65 00
09 65 00.H1	CORK FLOORING	09 65 00
09 65 00.J1	VINYL BASE	09 65 00
09 65 00.J2	"VINYL COVED BASE, 4"" HT"	09 65 00
09 65 00.K1	RUBBER BASE	09 65 00
09 65 00.L1	INTEGRAL BASE	09 65 00
09 65 00.M1	VINYL STAIR COMPONENTS	09 65 00
09 65 00.M2	VINYL STAIR RISER	09 65 00
09 65 00.M3	VINYL STAIR TREAD	09 65 00
09 65 00.M4	VINYL STAIR STRINGER	09 65 00
09 65 00.N1	RUBBER STAIR COMPONENTS	09 65 00
09 65 00.N2	RUBBER STAIR RISER	09 65 00
09 65 00.N3	RUBBER STAIR TREAD	09 65 00
09 65 00.N4	RUBBER STAIR STRINGER	09 65 00
09 65 00.P1	RESILIENT MOLDING	09 65 00
09 67 23	STANDARD RESINOUS FLOORING	Division 09
09 67 23.A1	PLACEHOLDER	09 67 23
09 68 00	CARPET	Division 09
09 68 00.A1	CARPET	09 68 00
09 68 00.B1	CARPET TILE	09 68 00
09 68 00.C1	CARPET PAD	09 68 00
09 68 00.D1	CARPET MOLDING	09 68 00
09 69 13	RIGID GRID ACCESS FLOORING	Division 09
09 69 13.A1	PLACEHOLDER	09 69 13
09 69 19	STRINGERLESS ACCESS FLOORING	Division 09
09 69 19.A1	PLACEHOLDER	09 69 19
09 70 00	WALL FINISHES	Division 09
09 70 00.A1	PLACEHOLDER	09 70 00
09 72 00	WALLCOVERINGS	Division 09
09 72 00.A1	VINYL WALLCOVERING	09 72 00
09 72 00.B1	TEXTILE WALLCOVERING	09 72 00
09 72 00.C1	WALLCOVERING BORDER	09 72 00
09 72 00.D1	PRESENTATION DRY ERASE SURFACE	09 72 00
09 72 00.E1	WALL LINER	09 72 00
09 72 00.F1	CORNER GUARD	09 72 00
09 72 00.G1	WAINSCOTE CAP	09 72 00
09 80 00	ACOUSTIC TREATMENT	Division 09
09 80 00.A1	PLACEHOLDER	09 80 00
09 90 00	PAINTS AND COATINGS	Division 09
09 90 00.A1	"PAINT, EPT-1"	09 90 00
09 90 00.B1	"PAINT, EPT-2"	09 90 00
09 90 00.C1	"PAINT, EPT-3"	09 90 00
09 90 00.D1	"PAINT, EPT-4"	09 90 00
09 90 00.E1	"PAINT, EPT-5"	09 90 00
09 90 00.F1	"PAINT, EPT-6"	09 90 00
09 90 00.G1	"PAINT, EPT-7"	09 90 00
09 90 00.H1	"PAINT, EPT-8"	09 90 00
09 90 00.J1	"PAINT, EPT-9"	09 90 00
09 90 00.K1	"PAINT, EPT-10"	09 90 00
09 90 00.L1	"PAINT, PT-1"	09 90 00
09 90 00.M1	"PAINT, PT-2"	09 90 00
09 90 00.N1	"PAINT, PT-3"	09 90 00
09 90 00.P1	"PAINT, PT-4"	09 90 00
09 90 00.Q1	"PAINT, PT-5"	09 90 00
09 90 00.R1	"PAINT, PT-6"	09 90 00
09 90 00.S1	"PAINT, PT-7"	09 90 00
09 90 00.T1	"PAINT, PT-8"	09 90 00
09 90 00.U1	"PAINT, PT-9"	09 90 00
09 90 00.V1	"PAINT, PT-10"	09 90 00
Division 10	SPECIALTIES
10 01 00	OPERATION AND MAINTENANCE OF SPECIALTIES	Division 10
10 01 00.A1	PLACEHOLDER	10 01 00
10 05 00	COMMON WORK RESULTS FOR SPECIALTIES	Division 10
10 05 00.A1	PLACEHOLDER	10 05 00
10 06 00	SCHEDULES FOR SPECIALTIES	Division 10
10 06 00.A1	PLACEHOLDER	10 06 00
10 08 00	COMMISSIONING OF SPECIALTIES	Division 10
10 08 00.A1	PLACEHOLDER	10 08 00
10 10 00	VISUAL COMMUNICATIONS SPECIALTIES	Division 10
10 10 00.A1	PRESENTATION BOARD	10 10 00
10 10 00.B1	MARKER BOARD	10 10 00
10 10 00.C1	TACK BOARD	10 10 00
10 10 00.C2	"TACK BOARD, CORK"	10 10 00
10 10 00.C3	"TACK BOARD, VINYL"	10 10 00
10 10 00.C4	"TACK BOARD, FABRIC"	10 10 00
10 10 00.D1	DISPLAY TRACK SYSTEM	10 10 00
10 10 00.E1	HORIZONTAL SLIDING UNIT	10 10 00
10 10 00.F1	PROJECTION SCREEN	10 10 00
10 10 00.G1	COPY BOARD	10 10 00
10 10 00.H1	MAP RAIL	10 10 00
10 10 00.J1	CHALK TRAY	10 10 00
10 14 01	EXTERIOR SIGNAGE	Division 10
10 14 01.A1	FREE STANDING PYLON SIGN	10 14 01
10 14 01.B1	FREE STANDING MONOLITH SIGN	10 14 01
10 14 01.C1	PANEL AND POST SIGN	10 14 01
10 14 01.D1	12" OXIDIZED BRONZE EXTERIOR LETTERING, HELVETICA FONT	10 14 01
10 14 02	INTERIOR SIGNAGE	Division 10
10 14 02.A1	METAL LETTERS	10 14 02
10 14 02.B1	PLASTIC LETTERS	10 14 02
10 14 02.C1	ROOM ID SIGN SYSTEM	10 14 02
10 14 02.C2	"ROOM ID, MESSAGE STRIP SIGN "	10 14 02
10 14 02.C3	"ROOM ID, STATUS SLIDER SIGN"	10 14 02
10 14 02.C4	"ROOM ID, W/ PICTOGRAPH SIGN"	10 14 02
10 14 02.D1	DIRECTIONAL SIGN	10 14 02
10 14 02.E1	WARNING SIGN	10 14 02
10 14 02.F1	BUILDING DIRECTORY	10 14 02
10 14 02.G1	SUSTAINABLE INFORMATION SIGN	10 14 02
10 14 02.H1	ALARM SIGN	10 14 02
10 14 02.J1	MESSAGE STRIP SIGNS	10 14 02
10 14 03	EXTERIOR SIGNAGE	Division 10
10 20 00	INTERIOR SPECIALTIES	Division 10
10 20 00.A1	PLACEHOLDER	10 20 00
10 21 13	TOILET COMPARTMENTS	Division 10
10 21 13.A1	HDPE TOILET PARTITIONS	10 21 13
10 21 13.B1	ROOM ENTRANCE SCREEN	10 21 13
10 21 13.C1	HDPE URINAL SCREEN	10 21 13
10 21 13.D1	HDPE LOCKER BENCH	10 21 13
10 22 13	WIRE MESH PARTITIONS	Division 10
10 22 13.A1	"NORMAL DUTY, WIRE MESH "	10 22 13
10 22 13.B1	"NORMAL DUTY, VERTICAL FRAME "	10 22 13
10 22 13.C1	"NORMAL DUTY, HORIZONTAL FRAME "	10 22 13
10 22 13.D1	"NORMAL DUTY, CENTER REINFORCING BAR "	10 22 13
10 22 13.E1	"NORMAL DUTY, CAPPING BAR "	10 22 13
10 22 13.F1	"NORMAL DUTY, LINE POST"	10 22 13
10 22 13.G1	"NORMAL DUTY, CORNER POST "	10 22 13
10 22 13.H1	"NORMAL DUTY, HINGED DOOR "	10 22 13
10 22 13.J1	"NORMAL DUTY, SHEET METAL BASE "	10 22 13
10 22 13.K1	"HEAVY DUTY, WIRE MESH "	10 22 13
10 22 13.L1	"HEAVY DUTY, VERTICAL FRAME "	10 22 13
10 22 13.M1	"HEAVY DUTY, HORIZONTAL FRAME "	10 22 13
10 22 13.N1	"HEAVY DUTY, CENTER REINFORCING BAR "	10 22 13
10 22 13.P1	"HEAVY DUTY, CAPPING BAR "	10 22 13
10 22 13.Q1	"HEAVY DUTY, LINE POST"	10 22 13
10 22 13.R1	"HEAVY DUTY, CORNER POST "	10 22 13
10 22 13.S1	"HEAVY DUTY, HINGED DOOR "	10 22 13
10 22 13.T1	"HEAVY DUTY, SHEET METAL BASE "	10 22 13
10 22 13.U1	SLIDING DOOR	10 22 13
10 22 13.V1	DOOR FRAME	10 22 13
10 22 26	OPERABLE PARTITIONS	Division 10
10 22 26.A1	PLACEHOLDER	10 22 26
10 22 26.13	ACCORDION FOLDING PARTITIONS	Division 10
10 22 26.13.A1	PLACEHOLDER	10 22 26.13
10 22 26.33	FOLDING PANEL PARTITIONS	Division 10

This is the start of the file's text. The full file is on GovTribe.

Other files

File	Type	Posted
Bid_Abstract_(Corrected)_W912P5-17-B-0001.pdf	PDF	Sep 14, 2017
Abstract_of_Offers.pdf	PDF	Sep 5, 2017
W912P5-17-B-0001-0005.pdf	PDF	Aug 24, 2017
W912P5-17-B-0001Am5_TSpecs-pages.pdf	PDF	Aug 24, 2017
W912P5-17-B-0001Am4_TSpecs-pages.pdf	PDF	Aug 14, 2017
W912P5-17-B-0001-0003.pdf	PDF	Aug 8, 2017
W912P5-17-B-0001Am3_Plans-sheets.pdf	PDF	Aug 8, 2017
CHL_Enterprise_Database_Schema.pdf	PDF	Aug 8, 2017
TVA_FACILITY_ACCESS_AGREEMENT_DRAFT_7-27-17.pdf	PDF	Aug 8, 2017
W912P5-17-B-0001Am1_TSpecs-pages.pdf	PDF	Jul 17, 2017
W912P5-17-B-0001Am1_AppBv2(05of15).pdf	PDF	Jul 11, 2017
118339_v2015_S_OPS.rvt	—	Jul 11, 2017
W912P5-17-B-0001Am1_AppBv1(08of16).pdf	PDF	Jul 11, 2017
118339_v2015_SITE.rvt	—	Jul 11, 2017
SiteVisitRoster-Muscle_Shoals.pdf	PDF	Jul 11, 2017
118339_v2015_M_CS.rvt	—	Jul 11, 2017
W912P5-17-B-0001Am1_AppBv2(06of15).pdf	PDF	Jul 11, 2017
W912P5-17-B-0001Am1_AppBv1(02of16).pdf	PDF	Jul 11, 2017
SiteVisitRoster-CHI.pdf	PDF	Jul 11, 2017
W912P5-17-B-0001Am1_AppBv2(13of15).pdf	PDF	Jul 11, 2017
FIO_Cofferdam_Stabilization.pdf	PDF	Jul 11, 2017
W912P5-17-B-0001Am1_AppBv2(14of15).pdf	PDF	Jul 11, 2017
118339_v2015_M_OPS.rvt	—	Jul 11, 2017
W912P5-17-B-0001Am1_AppBv1(15of16).pdf	PDF	Jul 11, 2017
118339_v2015_A_CS.rvt	—	Jul 11, 2017
W912P5-17-B-0001Am1_AppBv2(03of15).pdf	PDF	Jul 11, 2017
W912P5-17-B-0001Am1_AppBv2(02of15).pdf	PDF	Jul 11, 2017
61W510-2-LC.pdf	PDF	Jul 11, 2017
W912P5-17-B-0001Am1_AppBv1(01of16).pdf	PDF	Jul 11, 2017
W912P5-17-B-0001Am1_AppBv1(06of16).pdf	PDF	Jul 11, 2017
W912P5-17-B-0001Am1_AppBv1(04of16).pdf	PDF	Jul 11, 2017
FIO_Approach_Wall_Beam_As-Builts.pdf	PDF	Jul 11, 2017
Chickamauga_Lock_Chamber_GFE_Delivery.pdf	PDF	Jul 11, 2017
W912P5-17-B-0001Am1_AppBv2(07of15).pdf	PDF	Jul 11, 2017
118339_v2015_S_CS.rvt	—	Jul 11, 2017
FIO_Lock_Excavation.pdf	PDF	Jul 11, 2017
W912P5-17-B-0001Am1_AppBv1(12of16).pdf	PDF	Jul 11, 2017
W912P5-17-B-0001Am1_AppBv2(10of15).pdf	PDF	Jul 11, 2017
W912P5-17-B-0001Am1_AppBv2(11of15).pdf	PDF	Jul 11, 2017
Chick_Pre-Bid_Site_Visit_Presentation_27June2017.pdf	PDF	Jul 11, 2017
SiteVisitRoster-Core_Samples.pdf	PDF	Jul 11, 2017
W912P5-17-B-0001Am1_AppBv1(13of16).pdf	PDF	Jul 11, 2017
W912P5-17-B-0001Am1_AppBv1(05of16).pdf	PDF	Jul 11, 2017
W912P5-17-B-0001_RTA_TSpecs.pdf	PDF	Jun 19, 2017
CKLK_Lock_Chamber_Drawings_-_Folio_1.pdf	PDF	Jun 19, 2017
CKLK_Lock_Chamber_Drawings_-_Folio_4.pdf	PDF	Jun 19, 2017
CKLK_Lock_Chamber_Drawings_-_Folio_2.pdf	PDF	Jun 19, 2017
W912P5-17-B-0001.pdf	PDF	Jun 19, 2017
US_Citizen_Site_Visit_Form_AUG_2016.pdf	PDF	Jun 2, 2017
FN_Site_Visit_Form_AUG_2016.pdf	PDF	Jun 2, 2017

Show 40 more

50 files listed here. See the rest on GovTribe.

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

File details come from the government source that posted it. Updated Nov 14, 2017.