181109_-_Electrical_B3_Set.pdf

PDF 2 MB Posted Sep 17, 2019

Attached to: Corrosion Control Equipment Federal contract opportunity
Solicitation number: W912JV-19-Q-7011
Issued by: Department of the Army Oregon Army National Guard

About this file

From the source

Electrical Drawings

View the file

Other files for this federal contract opportunity

Other files attached to Corrosion Control Equipment, newest first.
File	Type	Posted
Orientation.pdf	PDF	Sep 20, 2019
SOW_Corrosion_Control_Equipment_2019_rev4.docx	DOCX document	Sep 20, 2019
Q&A__2.docx	DOCX document	Sep 20, 2019
Questions_and_answers.docx	DOCX document	Sep 17, 2019
Kingsley_B3_Architectural_2_of_2.pdf	PDF	Sep 17, 2019
181109_-_Mechanical_B3_Set.pdf	PDF	Sep 17, 2019
Kingsley_B3_Plumbing_-_Stamped.pdf	PDF	Sep 17, 2019
SOW_Corrosion_Control_Equipment_2019_rev4.docx	DOCX document	Sep 17, 2019
Kingsley_B3_Architectural_1_of_2.pdf	PDF	Sep 17, 2019
SOW_Corrosion_Control_Equipment_2019_rev3.docx	DOCX document	Sep 16, 2019

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

VFD

RECEPTACLE SYMBOLS

DUPLEX RECEPTACLE TEXT INDICATES MOUNTING HEIGHT

SIMPLEX RECEPTACLE

DOUBLE DUPLEX RECEPTACLE

ABOVE COUNTER DUPLEX RECEPTACLE

60"

RECEPTACLE NOTATIONS:

DENOTES DEDICATED OUTLETSD

DENOTES WEATHER PROOF OUTLETSWP

DENOTES EXPLOSION PROOF CLASS 1 DIVISION 2 OUTLETSX2

DENOTES EXPLOSION PROOF CLASS 1 DIVISION 1 OUTLETSX1

DENOTES GROUND FAULT INTERRUPTER OUTLETSGFCI

DENOTES ELECTRIC WATER COOLER OUTLETSEWC

SERVICE & DISTRIBUTION SYMBOLS

GROUND ACCESS WELL

GROUND ROD

GROUNDING CONDUCTORG

PANELBOARD

LIGHTNING AIR TERMINAL

STATIC GROUND RECEPTACLE

MOTOR & EQUIPMENT CONNECTION

SYMBOLS

ELECTRICAL CONNECTION TO EQUIPMENT AND MOTORS, SIZED

PER NEC. COORDINATE REQUIREMENTS WITH CONTRACTOR

FURNISHING MOTOR OR EQUIPMENT. REFER TO

SPECIFICATIONS AND EQUIPMENT WIRING SCHEDULE FOR

ADDITIONAL WORK ASSOCIATED WITH MOTOR OR EQUIPMENT.

VARIABLE FREQUENCY MOTOR CONTROLLER

NON-FUSIBLE DISCONNECT SWITCH

FUSIBLE DISCONNECT SWITCH

MTS

MOTOR STARTING SWITCH WITH OVERLOADS

MOTOR STARTING SWITCH WITHOUT OVERLOADS

MANUAL TRANSFER SWITCH

ENCLOSED CIRCUIT BREAKER

GENERAL SYMBOLS

KEYED NOTE, USED TO DESCRIBE ADDITIONAL

INFORMATION OF WORK REQUIRED, SPECIFIC TO

THE SHEET AND/OR DETAIL IT IS SHOWN WITH.

DETAIL NUMBER / SHEET NUMBER#/E-###

9.###

LINE TYPE KEY

EXISTING TO BE REMOVED BY THIS

CONTRACTOR (DARK DASHED LINE)

NEW WORK BY THIS CONTRACTOR

(DARK SOLID LINE)

ONE-LINE EQUIPMENT ENCLOSURE

PANEL DIVISION LINES

SITE UNDERGROUND ELECTRICE

SINGLE POLE SWITCH

LUMINAIRE CONTROL SYMBOLS

PHOTO ELECTRIC CONTROL (X REPRESENTS

OCCUPANCY/PHOTO SENSOR SCHEDULE DESIGNATION)

OCCUPANCY SENSOR CEILING MOUNT (X REPRESENTS

OCCUPANCY/PHOTO SENSOR SCHEDULE DESIGNATION)

ELECTRONIC TIME CLOCK

LUMINAIRE SYMBOLS

RECESSED LUMINAIRE

RECESSED TROFFER

RECESSED LINEAR

SURFACE ROUND LUMINAIRE

WALL MOUNTED EXIT SIGN

CEILING MOUNTED EXIT SIGN

OS X

ARROW DENOTES EXIT SIGN CHEVRON

EMERGENCY BATTERY UNIT

LOW VOLTAGE SWITCH

* DENOTES SWITCH NAME, SEE LIGHTING

CONTROL PANEL & SWITCH SCHEDULE.

SWITCH NOTATIONS:

3 DENOTES 3-WAY SWITCH

4 DENOTES 4-WAY SWITCH

D DENOTES WALL BOX DIMMER SWITCH

WSX DENOTES OCCUPANCY SENSOR

(X REPRESENTS SCHEDULE DESIGNATION)

P DENOTES PILOT SWITCH

T DENOTES TIMER SWITCH

EMERGENCY SHADING MODIFIER

PENDANT INDUSTRIAL

WALL BRACKET

1Ra

LUMINAIRE TYPE

LUMINAIRE CIRCUITRY & CONTROL KEY:

LOWER CASE LETTER INDICATES SWITCHLEG CONTROL

"R" INDICATES LIGHTING CONTROL PANEL

REFER TO LIGHTING CONTROL PANEL SCHEDULE

NUMBER INDICATES BRANCH PANEL CIRCUIT NUMBER

SURFACE INDUSTRIAL

GENERAL NOTES:

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

REFER TO THE G SERIES DRAWINGS FOR CODE ANALYSIS

PLANS, INFORMATION AND NOTES.

THE CONTRACTOR SHALL BECOME FAMILIAR WITH THE

DETAILS OF WORK, VERIFY DIMENSIONS IN THE FIELD,

AND ADVISE THE ARCHITECT/ENGINEER OF ANY

DISCREPANCY BEFORE PERFORMING ANY WORK.

THE COMPLETE INSTALLATION SHALL BE IN ACCORDANCE

WITH THE ABA (AMERICANS WITH BARRIERS ACT).

REFER TO ARCHITECTURAL DRAWINGS FOR FIRE RATED

WALLS AND FLOORS. MAKE RATED PENETRATIONS AS

REQUIRED. SEAL ALL RATED PENETRATIONS AS

IDENTIFIED IN DIVISION 1 REQUIREMENTS.

FLUSH MOUNT ALL TOGGLE SWITCHES AND

RECEPTACLES AT HEIGHTS ABOVE FINISHED FLOOR AS

SHOWN IN THE DEVICE MOUNTING HEIGHT DETAIL,

EXCEPT WHERE OTHERWISE NOTED. DEVICES MAY BE

SURFACE MOUNTED WHEN CONDUIT IS SPECIFIED

EXPOSED.

CIRCUIT NUMBERS ARE SHOWN FOR CIRCUIT

IDENTIFICATION. CIRCUITING SHALL AGREE WITH

NUMBERING ON THE PANEL SCHEDULES PROVIDED.

BALANCE THE LOAD ON PANELS AS EVENLY AS POSSIBLE

BETWEEN EACH PHASE. COMMON NEUTRALS MAY NOT BE

USED FOR BRANCH CIRCUITS. BALANCE THE LOAD ON

PANEL AS EVENLY AS POSSIBLE BETWEEN EACH PHASE.

CIRCUITS SERVING EMERGENCY AND EXIT LUMINAIRES

WILL BE RUN IN SEPARATE RACEWAY FROM ALL OTHER

CIRCUITS.

A #12 GREEN INSULATED GROUND CONDUCTOR SHALL BE

INSTALLED WITH CIRCUIT CONDUCTORS TO ALL

RECEPTACLES.

CONCEAL ALL CONDUIT IN WALLS, PARTITIONS, ABOVE

CEILING, ETC. UNLESS OTHERWISE INDICATED ON THE

PLANS OR IN THE SPECIFICATIONS. CONDUIT IN

MECHANICAL ROOMS, AND STORAGE ROOMS WITHOUT

CEILINGS MAY BE EXPOSED ON BUILDING STRUCTURE.

BOXES LOCATED ON OPPOSITE SIDES OF NON-RATED

WALLS SHALL BE OFFSET A MINIMUM OF 6"

HORIZONTALLY. "THRU-THE-WALL" BOXES SHALL NOT BE

ALLOWED.

COORDINATE AND CO-LOCATE WALL MOUNTED

RECEPTACLE LOCATIONS WITH TECHNOLOGY

(VOICE/DATA, ETC) OUTLETS SHOWN ON THE T-SERIES

DRAWINGS UNLESS OTHERWISE NOTED, EACH

TECHNOLOGY OUTLET SHALL BE LOCATED WITHIN 24"OF

ITS ASSOCIATED RECEPTACLE. ASSOCIATED RECEPTACLE

SHALL BE DEFINED AS THE RECEPTACLE NEAREST THE

LOCATION OF, AND AT THE SAME HEIGHT AS,THE

TECHNOLOGY OUTLET WHEN MULTIPLE RECEPTACLES

ARE SHOWN ON A WALL.

DUPLEX RECEPTACLES FOR ELECTRIC WATER COOLERS

(EWC) SHALL BE CONCEALED BEHIND WATER COOLER

ACCESS PLATE OR BE DIRECTLY BELOW AND CENTERED

ON EWC. CONTRACTOR SHALL VERIFY TYPE OF EWC TO

BE INSTALLED.

CONTRACTOR SHALL VERIFY ALL FURNITURE, MODULAR

FURNITURE AND EQUIPMENT LOCATIONS WITH

ARCHITECTURAL PLANS, ELEVATIONS AND REVIEWED

SHOP DRAWINGS. PRIOR TO MAKING THE ACTUAL

ELECTRICAL INSTALLATION THIS CONTRACTOR SHALL

ADJUST RECEPTACLES, OUTLETS OR CONNECTION

LOCATIONS TO ACCOMMODATE FURNITURE AND/OR

EQUIPMENT.

ELECTRICAL AND TELECOMMUNICATIONS EQUIPMENT

SHALL BE MOUNTED TO AVOID IMPEDANCE OF,

OPERATION OF, AND/OR ACCESS TO ELECTRICAL AND

MECHANICAL EQUIPMENT. ALL MOUNTING OF

ELECTRICAL AND TELECOMMUNICATIONS EQUIPMENT, ON

EQUIPMENT SUPPLIED BY ANOTHER CONTRACTOR, SHALL

BE APPROVED IN ADVANCE BY THE OTHER CONTRACTOR.

CONTRACTOR TO PROVIDE SUITABLE MECHANICAL

PROTECTION AROUND ALL CONDUITS STUBBED OUT

FROM FLOORS, WALLS OR CEILINGS DURING

CONSTRUCTION TO PREVENT BENDING OR DAMAGING OF

STUB OUTS DUE TO CARELESSNESS WITH

CONSTRUCTION EQUIPMENT.

CONTRACTOR SHALL BE RESPONSIBLE FOR ALL

OPENINGS REQUIRED IN WALLS. ALL OPENINGS SHALL BE

REPAIRED TO MATCH EXISTING BY A QUALIFIED

CONTRACTOR AT THE EXPENSE OF THIS CONTRACTOR.

ALL CONDUITS THROUGH WALLS SHALL BE GROUTED OR

SEALED INTO OPENINGS.

DRAWINGS INDICATE THE EXTENT OF HAZARDOUS

LOCATIONS. INSTALLATION MEANS AND METHODS SHALL

BE SUITABLY RATED FOR THE ENVIRONMENT INDICATED

ON THE DRAWINGS.

ALL INTERLOCKING REQUIRED BY THE DRIVE

MANUFACTURER BETWEEN THE VARIABLE FREQUENCY

DRIVE AND THE DISCONNECT SWITCHES SHALL BE THE

RESPONSIBILITY OF THE ELECTRICAL CONTRACTOR.

SCCR RATINGS LISTED FOR EQUIPMENT ARE MINIMUM

REQUIREMENTS FOR BUS BRACING AND DEVICE RATING.

ALL EQUIPMENT SHALL BE FULLY RATED UNLESS

SPECIFICALLY NOTED AS SERIES RATED.

EC SHALL REFER TO T-SERIES AND FA-SERIES SET OF

DOCUMENTS INCLUDED IN THIS BID PACKAGE FOR ALL

TELECOMMUNICATION AND FIRE ALARM WORK

ASSOCIATED WITH THIS PROJECT. EC SHALL INCLUDE IN

THIS BID ALL LABOR AND MATERIALS REQUIRED FOR THE

COMPLETE BOXES AND RACEWAY SYSTEMS FOR BOTH

TELECOMMUNICATION AND FIRE ALARM SYSTEMS (BOTH

NEW AND FUTURE). ALL CABLE TRAY, CONDUITS, BOXES

AND OUTLETS REQUIRED FOR TELECOMMUNICATION AND

FIRE ALARM SYSTEM INSTALLATION SHALL BE

COORDINATED WITH THE ASSOCIATED DRAWING SET AND

VERIFIED IN FIELD WITH TELECOMMUNICATION AND FIRE

ALARM CONTRACTORS PRIOR TO ROUGH-IN.

COORDINATE CONDUIT BETWEEN ALL SYSTEMS FOR A

CLEAN INSTALLATION.

SHEET NO.:

SHEET CONTENTS

DO NOT SCALE DRAWINGS

ISSUED

M&H NO.:

DATE:

DRAWN BY:

CHECKED BY:

© Copyright This document, or any portion thereof, shall not be duplicated, disclosed, or used on any other project or extension of this project except by written agreement with Mead & Hunt, Inc. Mead & Hunt shall not be responsible for any unauthorized use of, or alteration to these documents.

Mead & Hunt, Inc.

9600 NE Cascades Parkway, Suite 100 Portland, OR 97220 phone: 503-548-1494 meadhunt.com www.tetratech.com

711 TANK FARM ROAD, SUITE 110

SAN LUIS OBISPO, CA 93401

PHONE: (805) 542-9052 FAX: (805) 542-9254

/7 /2

:4 :2

M C

R e v it L o c a l\

-1

.0 -E

-C E

N T

R A

L -2 jr h .r v t

E-001

NOTES, SYMBOLS &

ABBREVIATIONS

O R

A N

K in g s le y F ie ld

K la m a th

F a lls

C O

N S

T R

U C

T C

O R

R O

N C

O N

T R

O L H

A N

G A

3142200-121252.01

KAS

IMR

11/09/18

JRH

ELECTRICAL ABBREVIATIONS

3R NEMA 3R RATING

4X NEMA 4X RATING

A AMPERES

A/E ARCHITECT / ENGINEER

AAC ABOVE ACCESSIBLE CEILING

ACCU AIR COOLED CONDENSING UNIT

AFF ABOVE FINISHED FLOOR

AFG ABOVE FINISHED GRADE

AHU AIR HANDLING UNIT

ALT ALTERNATE

APE AIRCRAFT PROCESS EQUIPMENT

ATS AUTOMATIC TRANSFER SWITCH

BLDG BUILDING

BRKR BREAKER

C CONDUIT

CB CIRCUIT BREAKER

CF CIRCULATION FAN

CH CHILLER

CHWP CHILLED WATER PUMP

CKT CIRCUIT

CP CIRCULATION PUMP

CRAC COMPUTER ROOM AIR CONDITIONER

CRP CONDENSATION RETURN

CUH CABINET UNIT HEATER

DC DROP CORD

DDC DIGITAL CONTROL PANEL

DH DUCT HEATER

DISC DISCONNECT

DO DOOR OPERATOR

DWG DRAWING

E/O ELECTRICAL-TO-OPTICAL CONVERTER

EC ELECTRICAL CONTRACTOR

ECB ENCLOSED CIRCUIT BREAKER

EF EXHAUST FAN

EM EMERGENCY

EMT ELECTRICAL METALLIC TUBING

ES EQUIPMENT SUPPLIER

ETR EXISTING TO REMAIN

EWC ELECTRICAL WATER COOLER

EWH ELECTRICAL WATER HEATER

F FUSED

FA FIRE ALARM

FCU FAN COIL UNIT

GC GENERAL CONTRACTOR

GD GARBAGE DISPOSAL

GFI GROUND FAULT INTERRUPTER

GND GROUND

GWH GAS WATER HEATER

HD HAND DRYER

HP HORSEPOWER

HVAC HEATING, VENTILATION, AIR CONDITIONING

HWB HOT WATER BOILER

HWP HOT WATER PUMP

IEWH INSTANTANEOUS ELECTRIC WATER HEATER

IH INFRARED HEATER

IMC INTERMEDIATE METALLIC CONDUIT

IWH INSTANTANEOUS WATER HEATER

J-BOX JUNCTION BOX

MAU MAKE-UP AIR UNIT

MAX MAXIMUM

MC MECHANICAL CONTRACTOR

MCC MOTOR CONTROL CENTER

MDF MAIN DISTRIBUTION FRAME

MDP MAIN DISTRIBUTION PANEL

MIN. MINIMUM

MNS MASS NOTIFICATION SYSTEM

MTD MOUNTED

MTG MOUNTING

MTS MANUAL TRANSFER SWITCH

NIC NOT IN CONTRACT

NL NIGHT LIGHT

NL/EL NIGHT LIGHT AND EMERGENCY LIGHT

NTS NOT TO SCALE

OC ON CENTER

OFCI OWNER FURNISHED, CONTRACTOR INSTALLED

OFOI OWNER FURNISHED, OWNER INSTALLED

PH PHASE

PNL PANEL

PVC POLYVINYL CHLORIDE

RCP RADIANT CEILING PANEL

RECPT RECEPTACLE

REF REFRIGERATOR

REQ'D REQUIRED

RF RETURN FAN

RGS RIGID GALVANIZED STEEL CONDUIT

MAY ALSO BE REFERENCED AS RMC OR GRC

RMC RIGID METAL CONDUIT

RTU ROOF TOP UNIT

S/N SOLID NEUTRAL

SE SERVICE ENTRANCE

SEC-P SECURITY PANEL

SF SUPPLY FAN

SP SUMP PUMP

SS STAINLESS STEEL

SW SWITCH

TBR TO BE REMOVED

TCP TEMPERATURE CONTROL PANEL

TFA TO FLOOR ABOVE

TFB TO FLOOR BELOW

TYP TYPICAL

UC UNIT COOLER

UG UNDERGROUND

UH UNIT HEATER

UNO UNLESS NOTED OTHERWISE

UV UNIT VENTILATER

V VOLTS

VFD VARIABLE FREQUENCY DRIVE

VS VERSUS

W WATTS

WCC WATER COOLED CONDENSER

WH WATER HEATER

WL WET LOCATION LISTED

WP WEATHERPROOF

XFMR TRANSFORMER

XP EXPLOSION PROOF

11/09/18 B-3 FINAL

3. FEEDER SIZES SHOWN ON THE RISER DIAGRAM INDICATE FEEDER AMPACITIES

AND DO NOT NECESSARILY CORRESPOND TO THE CIRCUIT BREAKER AMPACITIES.

CERTAIN FEEDERS MAY BE SIZED FOR DERATION FACTORS AND/OR OVERSIZED

FOR VOLTAGE DROP PER NEC REQUIREMENTS.

2. ALL THE CONDUCTOR AMPACITIES ARE BASED ON TABLE 310.15(B)(16) OF THE

2017 NEC FOR COPPER CONDUCTOR TYPE THHN/THWN-2

1. THE SCHEDULE IS A SCHEDULE OF TYPICAL FEEDERS AND SOME OF THE SIZES

MAY NOT APPLY TO THIS PROJECT.

FEEDER SCHEDULE NOTES:

2500Y 2500 7 3 - 500 1 - 500 1 - 350 - 4"

2500 2500 7 3 - 500 - 1 - 350 - 3 - 1/2"

1200Y 1200 4 3 - 350 1 - 350 1 - # 3/0 - 3"

1200 1200 4 3 - 350 - 1 - # 3/0 - 3"

1000Y 1000 3 3 - 400 1 - 400 1 - # 2/0 - 3-1/2"

1000 1000 3 3 - 400 - 1 - # 2/0 - 3"

800Y 800 2 3 - 500 1 - 500 1 - # 1/0 - 3 - 1/2"

800 800 2 3 - 500 - 1 - # 1/0 - 3"

700Y 700 2 3 - 500 1 - 500 1 - # 1/0 - 3-1/2"

700 700 2 3 - 500 - 1 - # 1/0 - 3"

600Y 600 2 3 - 350 1 - 350 1 - # 1 - 3"

600 600 2 3 - 350 - 1 - # 1 - 3"

500Y 500 2 3 - 250 1 - 250 1 - # 2 - 3"

500 500 2 3 - 250 - 1 - # 2 - 2-1/2"

450Y 450 2 3 - # 4/0 1 - # 4/0 1 - # 2 - 2-1/2"

450 450 2 3 - # 4/0 - 1 - # 2 - 2"

400Y 400 1 3 - 500 1 - 500 1 - # 3 - 3-1/2"

400 400 1 3 - 500 - 1 - # 3 - 3"

380Y 380 1 3 - 500 1 - 500 1 - # 3 - 3-1/2"

380 380 1 3 - 500 - 1 - # 3 - 3"

350Y 350 1 3 - 500 1 - 500 1 - # 3 - 3-1/2"

350 350 1 3 - 500 - 1 - # 3 - 3"

300Y 300 1 3 - 350 1 - 350 1 - # 4 - 3-1/2"

300 300 1 3 - 350 - 1 - # 4 - 3"

250Y 250 1 3 - 250 1 - 250 1 - #4 - 3"

250 250 1 3 - 250 - 1 - #4 - 2-1/2"

225Y 225 1 3 - # 4/0 1 - # 4/0 1 - # 4 - 2-1/2"

225 225 1 3 - # 4/0 - 1 - # 4 - 2"

200Y 200 1 3 - # 3/0 1 - # 3/0 1 - # 6 - 2-1/2"

200 200 1 3 - # 3/0 - 1 - # 6 - 2"

175Y 175 1 3 - # 2/0 1 - # 2/0 1 - # 6 - 2"

175 175 1 3 - # 2/0 - 1 - # 6 - 2"

150Y 150 1 3 - # 1/0 1 - # 1/0 1 - # 6 - 2"

150 150 1 3 - # 1/0 - 1 - # 6 - 1-1/2"

125Y 125 1 3 - # 1/0 1 - # 1/0 1 - # 6 - 2"

125 125 1 3 - # 1/0 - 1 - # 6 - 1-1/2"

110Y 110 1 3 - # 1 1 - # 1 1 - # 6 - 2"

110 110 1 3 - # 1 - 1 - # 6 - 1-1/2"

100Y 100 1 3 - # 1 1 - # 1 1 - # 8 - 1-1/2"

100 100 1 3 - # 1 - 1 - # 8 - 1-1/2"

80Y 80 1 3 - # 3 1 - # 3 1 - # 8 - 1-1/4"

80 80 1 3 - # 3 - 1 - # 8 - 1-1/4"

70Y 70 1 3 - # 4 1 - # 4 1 - # 8 - 1-1/4"

70 70 1 3 - # 4 - 1 - # 8 - 1-1/4"

60Y 60 1 3 - # 4 1 - # 4 1 - # 10 - 1-1/4"

60 60 1 3 - # 4 - 1 - # 10 - 1"

50Y 50 1 3 - # 6 1 - # 6 1 - # 10 - 1-1/4"

50 50 1 3 - # 6 - 1 - # 10 - 1"

45Y 45 1 3 - # 6 1 - # 6 1 - # 10 - 1"

45 45 1 3 - # 6 - 1 - # 10 - 3/4"

40Y 40 1 3 - # 8 1 - # 8 1 - # 10 - 1"

40 40 1 3 - # 8 - 1 - # 10 - 3/4"

35Y 35 1 3 - # 8 1 - # 8 1 - # 10 - 3/4"

35 35 1 3 - # 8 - 1 - # 10 - 3/4"

30Y 30 1 3 - # 10 1 - # 10 1 - # 10 - 3/4"

30 30 1 3 - # 10 - 1 - # 10 - 3/4"

25Y 25 1 3 - # 10 1 - # 10 1 - # 10 - 1/2"

25 25 1 3 - # 10 - 1 - # 10 - 1/2"

20Y 20 1 3 - # 12 1 - # 12 1 - # 12 - 1/2"

20 20 1 3 - # 12 - 1 - # 12 - 1/2"

PHASE NEUTRAL EQ GND ISO GND

MARK AMPACITY

NO. OF

SETS

CONDUCTOR SIZES (AWG or KCMIL) CONDUIT

SIZE

COPPER FEEDER SCHEDULE

B B

BBBB

B B B B B B

EXISTING COMMUNICATIONS MANHOLE

ELECTRICAL TRANSFORMER VAULT AND UTILITY

TRANSFORMER. INSTALL TRANSFORMER VAULT PER

UTILITY REQUIREMENTS. TRANSFORMER VAULT

SHALL BE ORIENTATED TO ALLOW TRANSFORMER

ACCESS FROM THE NORTH.

EXISTING UTILITY VAULT 227480.

REFER TO SHEET E-701 FOR

WORK ASSOCIATED WITH

EXISTING UTILITY VAULT.

INSTALL (1) -4" CONDUIT

PER PACIFIC POWER

UTILITY REQUIREMENTS.

EXISTING UTILITY HV DUCT BANK.

MUST MAINTAIN CONTINUITY

THROUGHOUT DURATION OF

PROJECT

COORDINATE ENTRY WITH

ELECTRICAL ROOM AND CHASE.

FOR POWER CONTINUATION, SEE E-SERIES DRAWINGS.

FOR TECHNOLOGY SYSTEMS, SEE T-SERIES DRAWINGS.

SWITCHBOARD 'MSB/MTR'.

BOND EQUIPMENT TO GROUND GRID PER CODE.

G G

#4/0AWG

BOND ALL METAL BOLLARDS WITHIN

10'-0" OF UTILITY TRANSFORMER AND

SWITCHBOARD INDIVIDUALLY TO

GROUND RING.

EEEEEEE

CONCRETE ENCASE

CONDUIT BELOW DRIVEWAY.

SEE DETAIL 2/E-503

REFER TO SHEET C-081 AND

ASSOCIATED DETAILS FOR

DIVISION 26 WORK ASSOCIATED WITH

NEW AIRFIELD / TAXIWAY LIGHTING.

1/LB-9 (PUMP POWER)

1/LB-11 (PUMP ALARM)

1/LB-13 (GFCI/WP RECEPTACLE)

E E

SHEET NO.:

SHEET CONTENTS

DO NOT SCALE DRAWINGS

ISSUED

M&H NO.:

DATE:

DRAWN BY:

CHECKED BY:

Mead & Hunt, Inc.

9600 NE Cascades Parkway, Suite 100 Portland, OR 97220 phone: 503-548-1494 meadhunt.com www.tetratech.com

711 TANK FARM ROAD, SUITE 110

SAN LUIS OBISPO, CA 93401

PHONE: (805) 542-9052 FAX: (805) 542-9254

/7 /2

:4 :2

M C

R e v it L o c a l\

-1

.0 -E

-C E

N T

R A

L -2 jr h .r v t

E-010

ELECTRICAL SITE

PLAN

O R

A N

K in g s le y F ie ld

K la m a th

F a lls

C O

N S

T R

U C

T C

O R

R O

N C

O N

T R

O L H

A N

G A

3142200-121252.01

KAS

IMR

11/09/18

JRH

PLAN

NORTH

TRUE

NORTH

1" = 20'-0"1

ELECTRICAL SITE PLAN

11/09/18 B-3 FINAL

POWER GENERAL NOTES:

ALL DEVICES AND EQUIPMENT IN CORROSION CONTROL HANGAR 123 SHALL BE

SURFACE MOUNTED. ALL CONDUIT SHALL BE RUN OVERHEAD AND OUTSIDE OF

THE HAZARDOUS CLASSIFICATION ZONE. NO CONDUIT SHALL BE ROUTED

BELOW HANGAR SLAB, UNLESS NOTED OTHERWISE. CONDUIT SHALL NOT BE

ATTACHED TO LEAD-LINED HANGAR WALLS. CONDUIT SHALL BE ATTACHED TO

HORIZONTAL STRUCTURAL GIRDERS. PROVIDE ADDITIONAL SUPPORTS AS

REQUIRED. ALL SUPPORTS, HANGARS AND STRUT UTILIZED IN HANGAR 123

SHALL BE NEMA 4X. COORDINATE ROUTING WITH OTHER TRADES. ALL

CONDUIT IN HANGAR 123 SHALL BE RMC.

SEE DRAWINGS E-151 AND E-152 FOR AREA CLASSIFICATION ZONES.

REFER TO DETAIL 3/E-503 FOR CONDUIT REQUIREMENTS FOR PASSING THRU

LEAD-LINED WALLS.

REFER TO E-603 FOR ELECTRICAL EQUIPMENT WIRING SCHEDULE.

X-RAY VAULT

ROOM

X-RAY CR

FILM VIEWING

ROOM

OIL ANALYSIS

ROOM

OFFICE

EQUIPMENT

ROOM

INSPECTION

BAY

VEST.

STENCIL

ROOM

FIRE

PROTECTION

ROOM124

AIR LOCK

PPE CLEAN

ROOM/

CIRCULAT.

WOMEN'S

LOCKER

ROOM

WOMEN'S

JAN

MEN'S

LAUNDRY

ROOM

MEN'S

LOCKER

ROOM

HALLWAY

VEST.

OFFICE

TRAINING /

BREAK ROOM

PAINT BOOTH

BEAD BOOTH

ROOM

PAINT MIXING

ROOM/STOR

GFCI/WP

GFCI/WP GFCI/WP

GFCI/WP

GFCI

GFCI GFCI

GFCI

GFCI/WPGFCI/WP

GFCI/WP

M T

GENERATOR

PLUG

PANEL 1/LC

PANEL 1/LD

PANEL 1/LF

46"

9.304

115A

STORAGE

9.3079.307

PANEL 1/LB

PANEL 1/LA

PANEL 1/HA

PANEL 1/LA

UNLESS NOTED OTHERWISE

PANEL 1/LF

UNLESS NOTED OTHERWISE

PANEL 1/LF

UNLESS NOTED OTHERWISE

PANEL 1/LD

UNLESS NOTED OTHERWISE

PANEL 1/LD

UNLESS NOTED OTHERWISE

PANEL 1/LC

UNLESS NOTED OTHERWISE

PANEL 1/LB

UNLESS NOTED OTHERWISE

PANEL 1/LB

UNLESS NOTED OTHERWISE

PANEL 1/LA

UNLESS NOTED OTHERWISE

EEWS-1

9.312

46"

E-101

19 19

46"

PFT

1/LD-33

1/LD-39

1/LD-41

GFCI

EWC

E-101

GFCI/WP

E-102

1/LD-26

EEWS-1

9.312

46"46"

EEWS-1EEWS-1

EEWS-1

PL-1

PL-2

MPM

PL-1

PL-2

1/LF-8

1/LF-2,4,6

46"

1/LF-10

1/LF-12

9 11

46"

GFCI GFCI

15 15

21 21

L6-30R

1/LF-14,16

(3#10, 3/4"C.)

XRAY

1/LF-18

1/LF-28

46"

GFCI

PAINTBLAST

BEAD

1/LB-1,3,5

1/LB-24

GFCI/WP

OHD OHD

46"

1/LB-8

46"

1/LC-5

1/LC-7

1/LC-9

GFCI

HANGAR

OHD OHD

46"

GFCI/WP

46"

46" 46" 46"

46"

GFCI/WP

46"

PANEL 1/LE

DOOR-1

DOOR-2

DOOR-1

1/LE-1,3,5

1/LE-2,4,6

OHD

9 9 11

151515

1/LA-17

1/LA-19 1/LA-211/LA-23

BAP-1

1/LA-25

REM-1

1/LA-27

REM-1

1/LA-29

EEWS-1

1/LA-31

DC/1LE

MTS/1LE

RSF

2/LE-9

EPO

LCP

BEACON LIGHT

@ 7'-6"

BEACON LIGHT

@ 7'-6"

9.320 9.320

9.320

GR GR GR GR

9.321

G G G G G G G G G G

CU-2CU-1

HP-3

HP-1

CU-1

CU-2

IR-1

1/LA-2

TO ELEC ROOM

GROUND BUS

IR-2

1/LA-2

IR-3

1/LA-4

IR-4

1/LA-4

DF-4

1/LA-35

DF-6

1/LA-35

DF-1

1/LA-35

DF-3

1/LA-35

DF-5

1/LA-35

DF-2

1/LA-35

EF-1

9.332

EF-3

1/LC-15

(ON ROOF)

1/HA-1,3,5

HP-2

1/LF-23,25

2/LB-16,18

1/LD-38,40

CUH

SMS

1/LA-39

SMS

1/LA-37

DETAIL 4/E-501, TYPICAL

9.337

P-3

1/LA-33

9.316

9.301 TYP OF 4

72"

9.302

GFCI

21 5

64" 64"

46"

9.313

GFCI

MOUNT UNDER SINK FOR

FUTURE GARBAGE DISPOSAL

GFCIGFCI

LAUNDRY

ROOM

42"

DRY

1/LD-14,16

42"

GFCI

SHEET NO.:

SHEET CONTENTS

DO NOT SCALE DRAWINGS

ISSUED

M&H NO.:

DATE:

DRAWN BY:

CHECKED BY:

Mead & Hunt, Inc.

9600 NE Cascades Parkway, Suite 100 Portland, OR 97220 phone: 503-548-1494 meadhunt.com www.tetratech.com

711 TANK FARM ROAD, SUITE 110

SAN LUIS OBISPO, CA 93401

PHONE: (805) 542-9052 FAX: (805) 542-9254

/7 /2

:4 :3

M C

R e v it L o c a l\

-1

.0 -E

-C E

N T

R A

L -2 jr h .r v t

E-101

FIRST FLOOR

POWER PLAN

O R

A N

K in g s le y F ie ld

K la m a th

F a lls

C O

N S

T R

U C

T C

O R

R O

N C

O N

T R

O L H

A N

G A

3142200-121252.01

KAS

IMR

11/09/18

JRH

KEYED NOTES

9.301 ROUTE MECHANICAL EQUIPMENT BRANCH CIRCUITS UNDERGROUND

BETWEEN EQUIPMENT AND DISCONNECTS.

9.302 PROVIDE 200A, 3-POLE, 4-WIRE GENERATOR RECEPTACLE. COORDINATE

EXACT NEMA REQUIREMENTS WITH BASE PRIOR TO ORDERING.

9.304 ELECTRICAL MAIN SERVICE CHASE. ELECTRICAL CHASE CONTINUES UP TO

BOTTOM OF ELECTRICAL ROOM ON THE EQUIPMENT FLOOR. CONDUITS TO

ENTER THE BOTTOM OF SERVICE SWITCHBOARD. COORDINATE

INSTALLATION WITH TELECOM SERVICE CONDUITS AND FOUNDATION WALL

OPENING.

9.307 XRAY VAULT ROOM RECESSED BACKBOXES TO BE LINED WITH EQUAL

THICKNESS SHEET LEAD. REFER TO SHEET A-142 FOR ADDITIONAL

INFORMATION. CONDUITS PENETRATING LEAD LINING SHOULD BE DONE SO

WITH A LEAD WRAPPED ELBOW TO PREVENT PASSAGE OF X-RAY THROUGH

THE OPENING. PROVIDE EXTENSIONS RINGS AS REQUIRED FOR BACKBOX

IN CMU WALL.

9.312 RECEPTACLES DESIGNATED WITH 'SW' ARE CONTROLLED VIA OCCUPANCY

SENSOR. PROVIDE PLUG LOAD POWER PACK(S) ASSOCIATED WITH CEILING

MOUNTED OCCUPANCY SENSOR(S). REFER TO ASSOCIATED LIGHTING

PLANS FOR OCCUPANCY SENSOR TYPE AND LOCATION.

9.313 PROVIDE 4" SQUARE BOX WITH 1" CONDUIT INSTALLED BETWEEN JUNCTION

BOX AND PANEL 1/LD FOR FUTURE. PROVIDE PULL STRING. JUNCTION BOX

INSTALLED AT 18"AFF. COORDINATE WITH MILLWORK CONTRACTOR.

9.316 PROVIDE NEMA 4X STRUT RACK FROM FLOOR TO STRUCTURAL GIRDER

FOR INSTALLATION OF EQUIPMENT. PROVIDE STRUT CROSS MEMBERS AS

REQUIRED. EQUIPMENT SHALL NOT BE MOUNTED TO LEAD LINED HANGAR

WALL. COORDINATE DEVICE REQUIREMENTS OF OTHER TRADES (FIRE

ALARM, CONTROLS, ETC.) INSTALLED IN THIS LOCATION FOR RACK SIZE.

9.320 REFER TO DETAIL 2/E-501 FOR SCHEMATIC DIAGRAM OF X-RAY INTERLOCK

SYSTEM.

9.321 PROVIDE FEDERAL SIGNAL 121S-120R, RED, ROTATING LIGHT (MODIFIED

WITH SEPARATE CONDUCTORS FOR MOTOR NEUTRAL AND LAMP NEUTRAL).

PROVIDE WALL MOUNT BRACKET LWMB2.

9.332 ALL DISCONNECT SWITCHES IN HANGAR 123 SHALL BE NEMA 4X.

9.337 PROVIDE A TOTAL OF TEN (10) - 1" SPARE CONDUITS WITH PULL STRING

FROM PANEL 1/LD (SECOND TUB) TO ABOVE ACCESSIBLE CEILING AND CAP

FOR FUTURE USE.

1/8" = 1'-0"1

FIRST FLOOR POWER PLAN

11/09/18 B-3 FINAL

1/4" = 1'-0"2

ENLARGED KITCHEN AREA - ROOM 113

1/4" = 1'-0"3

ENLARGED LAUNDRY - ROOM 111

NOTE: ALL 120V NORMAL POWER RECEPTACLES FED FROM PANEL 1/LD UNLESS OTHERWISE NOTED. NOTE: ALL 120V NORMAL POWER RECEPTACLES FED FROM PANEL 1/LD UNLESS

OTHERWISE NOTED.

EQUIPMENT

ROOM

ELEC.

E-102

GFCI/WP46"

46"

46" 46"

46"

46"46"

11 11

CP-1

CP-2

CP-3

2/LA-19

WH-1

2/LA-21

SAC-1

BAC-1

AD-1

2/LA-23

HPW-1HPW-2

HPW-1

HPW-2SPM-1

2/LA-25

BP-1

AHU-1

AHU-2

B-1

B-2

2/LA-27,29

2/LA-31,33

EF-2

2/LA-35

ERU-1

MAU-1

VFD

P-1

P-2

P-1

P-2

UH-2

UH-1

TCP

2/LA-37

EF-4

2/LA-39

46"

EQUIPMENT

ROOM

X1N

2/LA-2

9.202

9.202 (TYP.)

(TYP.)

ELEC.

2/LA-2

9.203

2/LA-2

9.204(TYP.)

2/LA-2

N1E

2/LA-2

9.205

VIA LCP FOR PE ON /

TIMECLOCK OFF

PANEL 2/LA

1/LD-36

1/HA-12Ra

OCE

9.2129.212

MSB/HA PANEL MDP/LAXFMR T-1 PANEL 2/LE

PANEL 2/LA

46"

46" 46"

ELEC.

2/LA-12/LA-1

9.3179.317

9.330

9.331

PANEL MP/HA

GND GND

2/LB-11

7 9

PANEL 2/LB

FMCP NAC

2/LE-2,4,6

9.314

9.315

46"

GFCI

2/LE-1 2/LE-3

FIRE

PROTECTION

ROOM

1/LD-28

ANT

2/LE-5

2/LE-7

SHEET NO.:

SHEET CONTENTS

DO NOT SCALE DRAWINGS

ISSUED

M&H NO.:

DATE:

DRAWN BY:

CHECKED BY:

Mead & Hunt, Inc.

9600 NE Cascades Parkway, Suite 100 Portland, OR 97220 phone: 503-548-1494 meadhunt.com www.tetratech.com

711 TANK FARM ROAD, SUITE 110

SAN LUIS OBISPO, CA 93401

PHONE: (805) 542-9052 FAX: (805) 542-9254

/7 /2

:4 :3

M C

R e v it L o c a l\

-1

.0 -E

-C E

N T

R A

L -2 jr h .r v t

E-102

EQUIPMENT FLOOR

ELECTRICAL PLANS

O R

A N

K in g s le y F ie ld

K la m a th

F a lls

C O

N S

T R

U C

T C

O R

R O

N C

O N

T R

O L H

A N

G A

3142200-121252.01

KAS

IMR

11/09/18

JRH

1/8" = 1'-0"1

EQUIPMENT FLOOR POWER PLAN

1/8" = 1'-0"2

EQUIPMENT FLOOR LIGHTING REFLECTED CEILING PLAN

1/4" = 1'-0"3

ENLARGED PLAN - ELEC 203

11/09/18 B-3 FINAL

1/4" = 1'-0"4

ENLARGED FIRE PROTECTION ROOM 122

KEYED NOTES

9.202 MOUNT FIXTURE AT 9'-0" AFF MEASURED FROM BOTTOM OF FIXTURE.

9.203 MOUNT FIXTURE AT 8'-0" AFF MEASURED FROM BOTTOM OF FIXTURE.

9.204 MOUNT FIXTURE AT 8'-6" AFF MEASURED FROM BOTTOM OF FIXTURE.

9.205 MOUNT FIXTURE AT 7'-6" AFF MEASURED FROM BOTTOM OF FIXTURE.

9.212 MOUNT FIXTURE AT 7'-0" ABOVE STAIR/LANDING MEASURED FROM BOTTOM

OF FIXTURE.

9.314 FIRE PUMP CONTROLLER

9.315 JOCKEY PUMP CONTROLLER

9.317 INSTALL L5-20 SIMPLEX RECEPTACLE TO SIDE OF CABLE TRAY (TYPICAL OF

4). REFER TO DETAIL 8/E-501.

9.330 PROVIDE SURGE PROTECTIVE DEVICES (SPD) ON ALL 120VAC CIRCUITS

ASSOCIATED WITH EQUIPMENT FED FROM PANEL 2/LE. PROVIDE HINGED

TERMINAL BOX ADJACENT TO PANEL 2/LE FOR ALL SPD(S). SPD MUST HAVE

BOTH UL 1449 AND UL 1283 LISTING.

9.331 HOUSEKEEPING PAD BY OTHERS. COORDINATE SIZE AND LOCATION WITH

GENERAL CONTRACTOR PRIOR TO INSTALLATION.

NOTE: ALL 120V NORMAL POWER RECEPTACLES SHALL BE FED FROM PANEL 2/LB, UNLESS NOTED OTHERWISE.

NOTE: ALL 120V NORMAL POWER RECEPTACLES SHALL BE FED FROM PANEL 2/LA, UNLESS NOTED OTHERWISE.

9.322 9.322

9.322

9.323 9.323

9.3239.323

9.323 9.323

9.323 9.323 9.323

9.3239.323

9.324

9.325

9.326

9.327

(TYP)

G G

GGGGGGGGGGGGGGGGGG

GGG

G G

G G G G G G

G G

G G G G G G G G G G

G G

G G G G G G G G G G G G G G

G G

G G G G G G G G G

G G

GGGGGGGGGGGG

GGGGGGG

9.328 9.329

9.323

LIGHTNING PROTECTION AND

GROUNDING GENERAL NOTES:

THE LIGHTNING PROTECTION SHALL REQUIRE AN INSPECTION PRIOR TO

ACCEPTANCE PER UFC 3-575-01. THE SYSTEM SHALL BE INSPECTED BY A

COMMERCIAL, 3RD PARTY INSPECTOR WHOSE SOLE WORK IS LIGHTNING

PROTECTION AND SHALL BE CERTIFIED BY THIS 3RD PARTY INSPECTOR AS

COMPLIANT WITH AFI 32-1065 AND NFPA 780.

THE USE OF BUILDING STEEL AS DOWN CONDUCTORS IS NOT PERMITTED.

INSTALLATION OF THE LIGHTNING PROTECTION SYSTEM SHALL NOT VOID

THE WARRANTY OF THE ROOF.

ANY EXHAUST AND VENTS SHALL BE PROTECTED BY ADDITIONAL AIR

TERMINALS. REFER TO MECHANICAL AND PLUMBING PLANS.

LIGHTNING PROTECTION

AND GROUNDING SYMBOLS

GROUND ROD

GROUND ACCESS WELL

LIGHTNING AIR TERMINAL

STATIC GROUND RECEPTACLE

GROUNDING CONDUCTORG

SHEET NO.:

SHEET CONTENTS

DO NOT SCALE DRAWINGS

ISSUED

M&H NO.:

DATE:

DRAWN BY:

CHECKED BY:

Mead & Hunt, Inc.

9600 NE Cascades Parkway, Suite 100 Portland, OR 97220 phone: 503-548-1494 meadhunt.com www.tetratech.com

711 TANK FARM ROAD, SUITE 110

SAN LUIS OBISPO, CA 93401

PHONE: (805) 542-9052 FAX: (805) 542-9254

/7 /2

:4 :3

M C

R e v it L o c a l\

-1

.0 -E

-C E

N T

R A

L -2 jr h .r v t

E-103

LIGHTNING

PROTECTION AND

GROUNDING PLAN

O R

A N

K in g s le y F ie ld

K la m a th

F a lls

C O

N S

T R

U C

T C

O R

R O

N C

O N

T R

O L H

A N

G A

3142200-121252.01

KAS

IMR

11/09/18

JRH

1/8" = 1'-0"1

LIGHTNING PROTECTION AND GROUNDING PLAN

11/09/18 B-3 FINAL

KEYED NOTES

9.322 PROVIDE BIMETALLIC CONNECTOR BETWEEN #1/0 AL AND #2 AWG CU DOWN

CONDUCTOR. PROVIDE #2 AWG CU "DOWN CONDUCTOR" FROM ROOF TO

GROUND TERMINAL AS INDICATED. "DOWN CONDUCTOR" SHALL BE

ROUTED IN CONDUIT INTERIOR TO THE BUILDING AND WITHIN CMU/STUD

CAVITY WHEREVER POSSIBLE.

9.323 LIGHTNING PROTECTION SYSTEM GROUND TERMINALS SHALL BE MINIMUM

3/4" X 10'-0" COPPER-CLAD STEEL GROUND ROD BURIED INTO EARTH 1'-6"

TO TOP OF GROUND ROD. CONDUCTORS SHALL BE PERMANENTLY

CONNECTED TO GROUND TERMINAL WITH EXOTHERMIC WELD. PROVIDE

MINIMUM ONE (1) GROUND TERMINAL IN A GROUND ACCESS WELL FOR

TESTING REQUIREMENTS. REFER TO PLANS FOR EXACT QUANTITY OF

ACCESS WELLS.

9.324 PROVIDE #1/0 AL "MAIN-SIZE LIGHTNING CONDUCTOR" FOR INTERCONNECT

OF ALL AIR TERMINALS ON ROOF.

9.325 CONNECT LIGHTNING PROTECTION SYSTEM / GROUND RING TO BUILDING

GROUND VIA MAIN GROUND BAR IN ELECTRICAL ROOM. REFER TO DETAIL

1/E-503 FOR ADDITIONAL REQUIREMENTS.

9.326 PROVIDE #1/0 BARE COPPER COUNTERPOISE GROUND RING SYSTEM

INSTALLED A MINIMUM OF 3'-8" AWAY FROM STRUCTURE. GROUND RING

SHALL BE BURIED AT LEAST 30" BELOW GRADE.

9.327 20'-0" MAXIMUM SEPARATION BETWEEN AIR TERMINALS ALONG ROOF

PERIMETER AND AS INDICATED (TYPICAL).

9.328 BOND STRIKE TERMINATION DEVICE DIRECTLY TO TOP OF MECHANICAL

UNIT.

9.329 BOND TO BOTTOM OF MECHANICAL UNIT METALLIC ENCLOSURE.

OS1

OS3

OS2

OS1

OS3

OS1

OS1OS1

OS1

OS2

OS1

OS1 OS1

OS1

OS2

OS1

LIGHTING GENERAL NOTES:

REFER TO SHEET E-001 FOR NOTES, SYMBOLS AND ABBREVIATIONS.

REFER TO SHEET E-601 FOR LUMINAIRE SCHEDULE.

REFER TO SHEET E-602 FOR OCCUPANCY SENSOR, LIGHTING CONTROL

PANEL AND SWITCH STATION SCHEDULES.

EC SHALL ALLOW TIME AND EFFORT FOR ALL OCCUPANCY SENSOR AND

PHOTO SENSOR CALIBRATION.

LOCATION OF CEILING OCCUPANCY SENSORS ON THIS PLAN ARE SHOWN

DIAGRAMMATICALLY AND DOESN'T SUGGEST ACUTAL LOCATIONS. EC SHALL

COORDINATE EXACT PLACEMENT IN FIELD BASED ON THIE INSTALLED

DUCTWORK, PIPING AND DIFFUSERS TO PREVENT OCCUPANCY SENSOR

NUISANCE TRIPPING. DO NOT INSTALL SENSORS WITHIN 3'-0" OF DIFFUSERS.

ALL EMERGENCY BATTERY OPERATED EXIT LIGHTS AND EBU'S SHALL BE

WIRED FROM SAME LIGHTING BRANCH CIRCUIT AS ROOM BEING SERVED.

ALL DEVICES AND EQUIPMENT IN CORROSION CONTROL HANGAR 123 SHALL

BE SURFACE MOUNTED. ALL CONDUIT SHALL BE RUN OVERHEAD AND

OUTSIDE OF THE HAZARDOUS CLASSIFICATION ZONE. NO CONDUIT SHALL BE

ROUTED BELOW HANGAR SLAB, UNLESS NOTED OTHERWISE. CONDUIT

SHALL NOT BE ATTACHED TO LEAD-LINED HANGAR WALLS. CONDUIT SHALL

BE ATTACHED TO HORIZONTAL STRUCTURAL GIRDERS. PROVIDE ADDITIONAL

SUPPORTS AS REQUIRED. ALL SUPPORTS, HANGARS AND STRUT UTILIZED IN

HANGAR 123 SHALL BE NEMA 4X. COORDINATE ROUTING WITH OTHER

TRADES. ALL CONDUIT IN HANGAR 123 SHALL BE RMC.

REFER TO DETAIL 3/E-503 FOR CONDUIT REQUIREMENTS FOR PASSING THRU

LEAD-LINED WALLS.

X-RAY CR

OIL ANALYSIS

ROOM

OFFICE

EQUIPMENT

ROOM

INSPECTION

BAY

VEST.

STENCIL

ROOM

FIRE

PROTECTION

ROOM

AIR LOCK

PPE CLEAN ROOM/

CIRCULAT.

WOMEN'S

LOCKER

ROOM

WOMEN'S

JAN

MEN'S

LAUNDRY

ROOM

MEN'S

LOCKER

ROOM

HALLWAY

VEST.

OFFICE

TRAINING /

BREAK ROOM

PAINT BOOTH

PAINT MIXING

ROOM/STOR

BEAD BOOTH

ROOM

AEA

B1E

OAE

OAE OCE

OCE

OC1

OC2

OCE

3bPANEL 1/LC

PANEL 1/LF

PANEL 1/LD

OCE

HANGAR

9.207 L 8Rd

L 8Rd

L 6Rc

L 4Rb

L 2Ra

9.208 (TYP.)

F 10Rg

F 10Re

F 10Rf

EBU1 EBU1

EBU1

EBU1 EBU1

EBU1

9.220 (TYP.)

1/HA-12Ra

VIA LCP FOR PE ON /

TIMECLOCK OFF

VIA LCP FOR PE ON /

TIMECLOCK OFF

VIA LCP FOR PE ON /

TIMECLOCK OFF

9.208

1/HA-12Ra

VIA LCP FOR PE ON /

TIMECLOCK OFF

9.209

9.210(TYP.)

VIA LCP FOR PE ON /

TIMECLOCK OFF

1/LA-12Ra

9.211

1/HA-12Ra

VIA LCP FOR PE ON /

TIMECLOCK OFF

9.209 1/HA-12Ra

VIA LCP FOR PE ON /

TIMECLOCK OFF

9.209

1/HA-12Ra

VIA LCP FOR PE ON /

TIMECLOCK OFF

1/HA-12Ra

VIA LCP FOR PE ON /

TIMECLOCK OFF

9.209

1/HA-12Ra

VIA LCP FOR PE ON /

TIMECLOCK OFF

9.209

1/HA-12Ra

VIA LCP FOR PE ON /

TIMECLOCK OFF

1/HA-12Ra

VIA LCP FOR PE ON /

TIMECLOCK OFF

9.212

1/HA-12Ra

VIA LCP FOR PE ON /

TIMECLOCK OFF

OCE

1/HA-12Ra

VIA LCP FOR PE ON /

TIMECLOCK OFF

9.209

OC1 OC1

1/LA-12Ra 1/LA-12Ra

VIA LCP FOR PE ON /

TIMECLOCK OFF

VIA LCP FOR PE ON /

TIMECLOCK OFF

9.211

OCE

1/HA-12Ra

VIA LCP FOR PE ON /

TIMECLOCK OFF

9.209

1/HA-12Ra

VIA LCP FOR PE ON /

TIMECLOCK OFF

9.209

9.206

A2E A2

32b

32a

C 30a

C 30b C 30a

30b

32b D1

32b D1E

32b D1

32a D1E

32a D1

32a D1E

32a D1 a ab

T 32 D2

30b

30b D1

30b D1E

30b D1 b b b

T T

30a D1

30a D1E

30a D1E a

D1 30a

D4 30c

D3 30b

Db a,b,c,d

19 19

D A

FILM VIEWING

ROOM

X-RAY VAULT

ROOM

21a

21b

N2E

21b

21a

N2E

21b

21a

21b

N2E

21a

N2E

9.214 (TYP.)

a,b a,b

3a 3b

PANEL 1/HA

UNLESS NOTED OTHERWISE

PANEL 1/LF

UNLESS NOTED OTHERWISE

PANEL 1/LF

UNLESS NOTED OTHERWISE

PANEL 1/LD

UNLESS NOTED OTHERWISE

PANEL 1/LD

UNLESS NOTED OTHERWISE

PANEL 1/LC

UNLESS NOTED OTHERWISE

PANEL 1/LB

UNLESS NOTED OTHERWISE

PANEL 1/LB

UNLESS NOTED OTHERWISE

PANEL 1/HA

UNLESS NOTED OTHERWISE

PANEL 1/LB

9.206(TYP.)

LCP 9.215

MOUNT ON ROOF.

AIM NORTH.

1/HA-14Rb

VIA LCP FOR

PE ON / OFF

(MTD ON ROOF)

1/HA-14Rb

VIA LCP FOR

PE ON / OFF

(MTD ON ROOF)

1/HA-14Rb

VIA LCP FOR

PE ON / OFF

(MTD ON PARAPET)

1/HA-14Rb

VIA LCP FOR

PE ON / OFF

(MTD ON PARAPET)

EBU

9.209

PANEL 1/HA

C 32a

C 30a

1/HA-12Ra

9.216

VIA LCP FOR PE ON /

TIMECLOCK OFF

A4E

(TYP.)

D3 30b

30a D1

30a D1E

30a D1

30a D1E

30a D1

30a D1E

30a D1

30a D1E

30a D1

9.210

9.217

(TYP.) d

30d 30d

9.210 (TYP.)

9.217

(TYP.)

a,b,c,d

9.3079.307

EBU1

9.221

9.222

9.316

9.316 a

9.223

9.224

KEYED NOTES

9.206 OCCUPANCY SENSORS SHALL BE PENDANT MOUNTED BELOW ALL

STRUCTURAL BEAMS, PLUMBING AND MECHANICAL PIPING AND DUCTWORK

TO ALLOW FOR CLEAN VIEWING ANGLE.

9.207 REFER TO DETAIL 1/E-501. TYPICAL FOR ALL WALL MOUNTED EXIT SIGNS

SHOWN ON THIS PLAN.

9.208 MOUNT FIXTURE AT 32'-0" AFF MEASURED FROM BOTTOM OF FIXTURE.

9.209 MOUNT FIXTURE AT 10'-0" AFF MEASURED FROM BOTTOM OF FIXTURE.

9.210 MOUNT FIXTURE AT 13'-0" AFF MEASURED FROM BOTTOM OF FIXTURE OR

ON NEAREST HORIZONTAL STRUCTURAL GIRDER. ALL TYPE F FIXTURES

SHALL BE MOUNTED AT SAME HEIGHT.

9.211 MOUNT FIXTURE AT 13'-6" AFF MEASURED FROM BOTTOM OF FIXTURE.

9.212 MOUNT FIXTURE AT 7'-0" ABOVE STAIR/LANDING MEASURED FROM BOTTOM

OF FIXTURE.

9.214 MOUNT FIXTURE AT 12'-0" AFF MEASURED FROM BOTTOM OF FIXTURE.

9.215 PROVIDE WITH NEMA 4X ENCLOSURE.

9.216 MOUNT FIXTURE BELOW MEZZANINE STAIR LANDING AT 9'-6" AFG

MEASURED FROM BOTTOM OF FIXTURE.

9.217 FIXTURE SHALL BE TRAPEZE MOUNTED BELOW MECHANICAL DUCTWORK

AT 12'-0" AFF MEASURED FROM BOTTOM OF FIXTURE.

9.220 MOUNT FIXTURE AT ROUGHLY 8'-6" AFF TO BOTTOM OF FIXTURE OR ON

NEAREST HORIZONTAL STRUCTURAL GIRDER. ALL EBUS SHALL BE

MOUNTED AROUND HANGAR AT SAME HEIGHT.

9.221 PROVIDE ADDITIONAL NEMA 4X STRUT SUPPORTS OFF OF STRUCTURAL

GIRDER TO ALLOW FOR EXIT SIGN MOUNTING. TYPICAL OF EXIT SIGNS IN

HANGAR 123.

9.222 MOUNT TO COLUMN.

9.223 PROVIDE FEDERAL SIGNAL 121S-120R, RED, ROTATING LIGHT (MODIFIED

WITH SEPARATE CONDUCTORS FOR MOTOR NEUTRAL AND LAMP NEUTRAL).

PROVIDE WALL MOUNT BRACKET LWMB2. MOUNT BEACON LIGHT AT 7'-6".

BEACON LIGHTS (TYPICAL OF 3 WITH THIS NOTE) CONTROLLED BY SWITCH

IN AIR LOCK 124. BEACON LIGHTS SHALL BE CIRCUITED TO PANEL 1/LA-41.

9.224 PROVIDE SWITCH WITH ENGRAVED NAMEPLATE "XRAY BEACON LIGHTS".

9.307 XRAY VAULT ROOM RECESSED BACKBOXES TO BE LINED WITH EQUAL

THICKNESS SHEET LEAD. REFER TO SHEET A-142 FOR ADDITIONAL

INFORMATION. CONDUITS PENETRATING LEAD LINING SHOULD BE DONE SO

WITH A LEAD WRAPPED ELBOW TO PREVENT PASSAGE OF X-RAY THROUGH

THE OPENING. PROVIDE EXTENSIONS RINGS AS REQUIRED FOR BACKBOX

IN CMU WALL.

9.316 PROVIDE NEMA 4X STRUT RACK FROM FLOOR TO STRUCTURAL GIRDER

FOR INSTALLATION OF EQUIPMENT. PROVIDE STRUT CROSS MEMBERS AS

REQUIRED. EQUIPMENT SHALL NOT BE MOUNTED TO LEAD LINED HANGAR

WALL. COORDINATE DEVICE REQUIREMENTS OF OTHER TRADES (FIRE

ALARM, CONTROLS, ETC.) INSTALLED IN THIS LOCATION FOR RACK SIZE.

SHEET NO.:

SHEET CONTENTS

DO NOT SCALE DRAWINGS

ISSUED

M&H NO.:

DATE:

DRAWN BY:

CHECKED BY:

Mead & Hunt, Inc.

9600 NE Cascades Parkway, Suite 100 Portland, OR 97220 phone: 503-548-1494 meadhunt.com www.tetratech.com

711 TANK FARM ROAD, SUITE 110

SAN LUIS OBISPO, CA 93401

PHONE: (805) 542-9052 FAX: (805) 542-9254

/7 /2

:4 :4

M C

R e v it L o c a l\

-1

.0 -E

-C E

N T

R A

L -2 jr h .r v t

E-121

FIRST FLOOR

LIGHTING PLAN

O R

A N

K in g s le y F ie ld

K la m a th

F a lls

C O

N S

T R

U C

T C

O R

R O

N C

O N

T R

O L H

A N

G A

3142200-121252.01

KAS

IMR

11/09/18

JRH

1/8" = 1'-0"1

FIRST FLOOR LIGHTING PLAN

X-RAY VAULT

ROOM

X-RAY CR

FILM VIEWING

ROOM

OIL ANALYSIS

ROOM

OFFICE

EQUIPMENT

ROOM

INSPECTION

BAY

VEST.

STENCIL

ROOM

FIRE

PROTECTION

ROOM

AIR LOCK

PPE CLEAN

ROOM/

CIRCULAT.

WOMEN'S

LOCKER

ROOM

WOMEN'S

JAN

MEN'S

LAUNDRY

ROOM

MEN'S

LOCKER

ROOM

HALLWAY

VEST.

OFFICE

TRAINING /

BREAK ROOM

PAINT BOOTH

BEAD BOOTH

ROOM

PAINT MIXING

ROOM/STOR

9.1019.102

5'-0"

E-152

CLASS 1, DIVISION 1 AREA IN TRENCH

HAZARDOUS CLASSIFICATION NOTES:

ALL ELECTRICAL WORK IN HAZARDOUS AREAS SHALL BE IN ACCORDANCE

WITH NATIONAL ELECTRICAL CODE ARTICLE 501 CLASSIFICATION INDICATED.

CLASSIFICATION APPLIES TO ENTIRE VOLUME OF ROOM, PAINT BOOTH, OR

BEAD BLAST BOOTH. DIVISION 2 AREA EXTENDS OUTSIDE ROOM TO A THREE

FOOT RADIUS FROM CENTERLINE OF OUTSIDE DOOR FACE FROM FLOOR TO

TOP OF DOOR.

BELOW FLOOR LEVEL: ANY PIT OR DEPRESSION BELOW THE LEVEL OF THE

HANGAR FLOOR SHALL BE CLASSIFIED AS A CLASS 1 DIVISION 1 LOCATION

THAT SHALL EXTEND UP TO SAID FLOOR LEVEL.

AREAS NOT CUT OFF OR VENTILATED FROM HANGAR: THE ENTIRE AREA OF

THE HANGAR INCLUDING ANY ADJACENT AND COMMUNICATION AREAS NOT

SUITABLY CUT OFF FROM THE HANGAR SHALL BE CLASSIFIED AS CLASS 1

DIVISION 2 LOCATION UP TO 18" AFF.

VICINITY OF AIRCRAFT: THE AREA WITHIN 5 FEET HORIZONTALLY FROM

AIRCRAFT POWER PLANTS OR FUEL TANK SHALL BE CLASSIFIED AS A CLASS

1 DIVISION 2 LOCATION THAT SHALL EXTEND UPWARD FROM FLOOR TO A

LEVEL 5 FEET ABOVE THE UPPER SURFACE OF THE WINGS AND OF ENGINE

ENCLOSURES.

HAZARDOUS CLASSIFICATION

HATCHING KEY:

CLASS 1, DIVISION 1

CLASS 1, DIVISION 2

SHEET NO.:

SHEET CONTENTS

DO NOT SCALE DRAWINGS

ISSUED

M&H NO.:

DATE:

DRAWN BY:

CHECKED BY:

Mead & Hunt, Inc.

9600 NE Cascades Parkway, Suite 100 Portland, OR 97220 phone: 503-548-1494 meadhunt.com www.tetratech.com

711 TANK FARM ROAD, SUITE 110

SAN LUIS OBISPO, CA 93401

PHONE: (805) 542-9052 FAX: (805) 542-9254

/7 /2

:4 :4

M C

R e v it L o c a l\

-1

.0 -E

-C E

N T

R A

L -2 jr h .r v t

E-151

FIRST FLOOR

HAZARDOUS

CLASSIFICATION

AREAS

O R

A N

K in g s le y F ie ld

K la m a th

F a lls

C O

N S

T R

U C

T C

O R

R O

N C

O N

T R

O L H

A N

G A

3142200-121252.01

KAS

IMR

11/09/18

JRH

1/8" = 1'-0"1

FIRST FLOOR HAZARDOUS CLASSIFICATION AREAS PLAN

KEYED NOTES

9.101 PAINT BOOTH TO BE SELECTED BY GOVERNMENT. DIMENSIONS AND

CLASSIFICATION AREAS TO BE FINALIZED AFTER GOVERNMENT SELECTION.

CLASSIFICATION AREA EXTENDS 3'-0" BEYOND ANY OPENING IN BOOTH.

9.102 BEAD BLAST BOOTH TO BE BY GOVERNMENT. DIMENSIONS AND

CLASSIFICATION AREAS TO BE FINALIZED AFTER GOVERNMENT SELECTION.

CLASSIFICATION AREA EXTENDS 3'-0" BEYOND ANY OPENING IN BOOTH.

TOP OF WING AND/OR ENGINE ENCLOSURE

CLASS 1, DIVISION 1 AREA (IN PIT)

HAZARDOUS CLASSIFICATION NOTES:

ALL ELECTRICAL WORK IN HAZARDOUS AREAS SHALL BE IN ACCORDANCE

WITH NATIONAL ELECTRICAL CODE ARTICLE 501 CLASSIFICATION INDICATED.

CLASSIFICATION APPLIES TO ENTIRE VOLUME OF ROOM, PAINT BOOTH, OR

BEAD BLAST BOOTH. DIVISION 2 AREA EXTENDS OUTSIDE ROOM TO A THREE

FOOT RADIUS FROM CENTERLINE OF OUTSIDE DOOR FACE FROM FLOOR TO

TOP OF DOOR.

BELOW FLOOR LEVEL: ANY PIT OR DEPRESSION BELOW THE LEVEL OF THE

HANGAR FLOOR SHALL BE CLASSIFIED AS A CLASS 1 DIVISION 1 LOCATION

THAT SHALL EXTEND UP TO SAID FLOOR LEVEL.

AREAS NOT CUT OFF OR VENTILATED FROM HANGAR: THE ENTIRE AREA OF

THE HANGAR INCLUDING ANY ADJACENT AND COMMUNICATION AREAS NOT

SUITABLY CUT OFF FROM THE HANGAR SHALL BE CLASSIFIED AS CLASS 1

DIVISION 2 LOCATION UP TO 18" AFF.

VICINITY OF AIRCRAFT: THE AREA WITHIN 5 FEET HORIZONTALLY FROM

AIRCRAFT POWER PLANTS OR FUEL TANK SHALL BE CLASSIFIED AS A CLASS

1 DIVISION 2 LOCATION THAT SHALL EXTEND UPWARD FROM FLOOR TO A

LEVEL 5 FEET ABOVE THE UPPER SURFACE OF THE WINGS AND OF ENGINE

ENCLOSURES.

9.1019.102

HAZARDOUS CLASSIFICATION

HATCHING KEY:

CLASS 1, DIVISION 1

CLASS 1, DIVISION 2

SHEET NO.:

SHEET CONTENTS

DO NOT SCALE DRAWINGS

ISSUED

M&H NO.:

DATE:

DRAWN BY:

CHECKED BY:

Mead & Hunt, Inc.

9600 NE Cascades Parkway, Suite 100 Portland, OR 97220 phone: 503-548-1494 meadhunt.com www.tetratech.com

711 TANK FARM ROAD, SUITE 110

SAN LUIS OBISPO, CA 93401

PHONE: (805) 542-9052 FAX: (805) 542-9254

/7 /2

:4 :4

M C

R e v it L o c a l\

-1

.0 -E

-C E

N T

R A

L -2 jr h .r v t

E-152

HAZARDOUS

CLASSIFICATION

AREAS -

ELEVATIONS

O R

A N

K in g s le y F ie ld

K la m a th

F a lls

C O

N S

T R

U C

T C

O R

R O

N C

O N

T R

O L H

A N

G A

3142200-121252.01

KAS

IMR

11/09/18

JRH

1/8" = 1'-0"1

HAZARDOUS CLASSIFICATION ELEVATION - HANGAR BAY

KEYED NOTES

9.101 PAINT BOOTH TO BE SELECTED BY GOVERNMENT. DIMENSIONS AND

CLASSIFICATION AREAS TO BE FINALIZED AFTER GOVERNMENT SELECTION.

CLASSIFICATION AREA EXTENDS 3'-0" BEYOND ANY OPENING IN BOOTH.

9.102 BEAD BLAST BOOTH TO BE BY GOVERNMENT. DIMENSIONS AND

CLASSIFICATION AREAS TO BE FINALIZED AFTER GOVERNMENT SELECTION.

CLASSIFICATION AREA EXTENDS 3'-0" BEYOND ANY OPENING IN BOOTH.

1/8" = 1'-0"2

HAZARDOUS CLASSIFICATION ELEVATION - PAINT AND BEAD BOOTHS

3'-0"

F R

A M

E H

H T

0'-4"

LOCATE 3" ABOVE DOOR FRAME

WHEN DIM ABOVE IS 12" OR

GREATER.

ALIGN WITH TOP OF DOOR

FRAME WHEN DIM. ABOVE

DOOR HEAD <12" MOUNT

ON STRIKE SIDE

FUSED DISC.

SW. BY C.

4#12, 3/4"C.

CONTROL PANEL

BY EQUIPMENT

SUPPLIER

5#16, 3/4"C.

OPEN/CLOSE

PUSH BUTTON

ONE EACH SIDE

TO PANEL

INTERLOCK

PANEL

BEACON

TERMINAL

BOX

TO FIELD INTERLOCK DEVICES (DOOR SWITCHES)

KEYED NOTES:

1. MOUNT INTERLOCK PANEL TO WALL OF ROOM 105.

2. MOUNT BEACON TERMINAL BOX WITHIN 8'-0" OF INTERLOCK PANEL IN ROOM 105.

3. MOUNT JUNCTION BOX WITHIN 8'-0" OF INTERLOCK PANEL FOR JOINING INTERLOCK

CIRCUITS.

4. MOUNT JUNCTION BOX WITHIN 8'-0" OF INTERLOCK PANEL FOR PROVIDING 120V

A.C. POWER TO PANEL.

5. REFER TO SHEET E-101 FOR BEACON LIGHT LOCATIONS.

6. REFER TO SHEET E-101 FOR EPO LOCATION.

GENERAL NOTES:

1. X-RAY INTERLOCK SYSTEM EQUIPMENT AND DEVICES PROVIDED BY

GOVERNMENT, INSTALLED AND WIRED BY ELECTRICAL CONTRACTOR. X-RAY

INTERLOCK SYSTEM IS TSG CAT. TSGDD1423.

2. ELECTRICAL CONTRACTOR RESPONSIBLE FOR ALL CONDUIT, BACKBOXES AND

WIRING.

3. COORDINATE INSTALLATION OF SYSTEM WITH C.O.R.

1 2

120V

3#12, 3/4"C.

TO EPO

FOR BIDDING PURPOSES ASSUME 4#12, 3/4"C. (TYPICAL OF ALL)

6#12, 3/4"C.

1" CONDUIT WITH MFR CABLE

12#12, 1"C.

2" 2"18" DIA.

GROUND

PAINT THE WORD "GROUND" IN 1"

BLACK LETTERS AND THE DATE

TESTED IN 1/2" BLACK LETTERS

PAINT RED

PAINT YELLOW

GROUND

RECEPTACLE SET IN

FLOOR

PLAN

3/4"

2-3/4" DIA.

-7

O R

H A

N G

A R

O R

H Y

D R

A N

R E

F U

E L

G S

Y S

T E

CAST BRONZE COVER,

FRICTION FIT BRASS PIN

CAST BRONZE HOUSING.

#4 FOR WATER SERVICE

MAIN CONNECTION IN

HANGARS.

IN HANGARS, MAX.

RESISTANCE TO GROUND

SHALL BE 25 OHMS FROM

ANY GROUND ROD.

INSTALL BELOW CONCRETE

SLAB. EXOTHERMIC

BONDING. GROUNDING

CABLE: #4 FOR HANGARS. #

1/0 FOR HYDRANT

REFUELING.

3/4" N.C. THREAD.

3/4" PIPE OR ROD FOR

HANGARS. 3/4" COPPER-

WELD GROUND ROD FOR

HYDRANT REFUELING.

#10 BRASS BALL CHAIN.

FINISHED HANGAR FLOOR

OR APRON PAVEMENT.

ELEVATION

2'-0" MIN. BELOW FINAL GRADE

CONDUITS-TYPE, QUANTITY AND SIZE AS

SHOWN ON DRAWINGS

4" SAND FILL ABOVE AND BELOW CONDUITS

COMPACTED BACKFILL W/ 2" OR SMALLER

AGGREGATE

METALLIC WARNING TAPE 6" BELOW FINAL GRADE

PAVEMENT

MULTIPLE CONDUITS UNDER PAVEMENT

2'-0" MIN. BELOW FINAL GRADE

CONDUITS-TYPE, QUANTITY AND SIZE AS

SHOWN ON DRAWINGS

4" SAND FILL ABOVE AND BELOW CONDUITS

COMPACTED BACKFILL W/ 2" OR

SMALLER AGGREGATE

METALLIC WARNING TAPE 12" BELOW FINAL

GRADE

ORGANIC TOP SOIL (GRASS AREA)MULTIPLE CONDUITS UNDER GRASS

CONTINUOUS (360 DEGREE) SWIVEL

GROUNDED RETRACTABLE POWER

CORD W/ DUAL RECEPTACLE ON END.

FURNISHED W/ 12 FT OF 12-3 SJO CORD

(2 CONDUCTORS PLUS GROUND)

ENCLOSED STEEL CONSTRUCTION,

UL LISTED, LOCKING RATCHET TO

HOLD CORD AT DESIRED LENGTH.

MOUNTS ON 4" OCTAGONAL OUTLET

BOX.

PORTABLE OUTLET BOX FOR (2) STANDARD DUPLEX

RECEPTACLES. DANIEL WOODHEAD #3000 WITH TWO

(2) 20A, 120V DUPLEX RECEPTACLES IN BOX.

BALL

STOP

NEMA L5-20R

RECEPTACLE

U-CHANNEL STRUT

1/2" ALL-THREAD

SUPPORT

EMT CONDUIT

SUPPORTED TO

CEILING

FINISHED FLOOR

46"

18"

POWER RECEPTACLES

LOCATED IN OFFICES AND

OTHER FINISHED AREAS

UNLESS NOTED OTHERWISE.

ALL SWITCHES, FA PULL STATIONS

AND POWER RECEPTACLES LOCATED

IN UNFINISHED AREAS UNLESS NOTED

OTHERWISE.

NOTE:

MOUNTING HEIGHT DIMENSION FOR POWER RECEPTACLES ABOVE

COUNTER SHALL BE 6" ABOVE TOP OF COUNTER OR COUNTER

BACKSPLASH MEASURED TO THE CENTER OF THE OUTLET BOX.

CENTER OF

OUTLET BOX

SHEET NO.:

SHEET CONTENTS

DO NOT SCALE DRAWINGS

ISSUED

M&H NO.:

DATE:

DRAWN BY:

CHECKED BY:

Mead & Hunt, Inc.

9600 NE Cascades Parkway, Suite 100 Portland, OR 97220 phone: 503-548-1494 meadhunt.com www.tetratech.com

711 TANK FARM ROAD, SUITE 110

SAN LUIS OBISPO, CA 93401

PHONE: (805) 542-9052 FAX: (805) 542-9254

/7 /2

:4 :4

M C

R e v it L o c a l\

-1

.0 -E

-C E

N T

R A

L -2 jr h .r v t

E-501

DETAILS

O R

A N

K in g s le y F ie ld

K la m a th

F a lls

C O

N S

T R

U C

T C

O R

R O

N C

O N

T R

O L H

A N

G A

3142200-121252.01

KAS

IMR

11/09/18

JRH

NO SCALE1

EXIT SIGN WALL MOUNTING AT DOOR

NO SCALE3

MOTORIZED ROLL-UP DOOR WITH

PUSH BUTTON CONTROL

11/09/18 B-3 FINAL

NO SCALE2

INTERLOCK PANEL WIRING DIAGRAM

NO SCALE4

STATIC GROUNDING RECEPTACLE

NO SCALE5

UNDERGROUND CONDUIT DETAIL-PAVEMENT

NO SCALE6

UNDERGROUND CONDUIT DETAIL-GRASS

NO SCALE7

RETRACTABLE RECEPTACLE DETAIL

NO SCALE8

RACK RECEPTACLE DETAIL

NO SCALE9

DEVICE MOUNTING HEIGHTS DETAIL

UNIVERSAL FLAT SURFACE AIR

TERMINAL BASE MOUNTED

VERTICALLY

CUAT / ALAT - STYLE GENTLY

TAPERED AIR TERMINAL

CABLE FASTENER

COPPER OR ALUMINUM

CLASS I OR CLASS II

LIGHTNING PROTECTION

CONDUCTOR

TOP VIEW (COVER REMOVED)

GROUND ROD

GROUND CLAMP

GRAVEL OR CRUSHED

STONE

GROUNDING CONDUCTOR

COVER REFERENCED ABOVE

(TOP VIEW)

POLYMER CONCRETE

FIBERGLASS REINFORCED BOX

SECTION A-A

A-A A-A

WELD CONDUCTOR TO

GROUND ROD OR USE

HIGH COMPRESSION

FITTING

3/4" X 10' COPPERCLAD

GROUND ROD

#4/0 CU. GROUND

CONDUCTOR

NATIVE BACKFILL

GENERAL NOTES:

1. NEUTRAL SYSTEM TO TEST AT LESS THAN 10 OHMS. IF THIS CAN'T BE MET, INFORM

CONTRACTING OFFICER FOR DIRECTIONS.

CUAT / ALAT - STYLE GENTLY

TAPERED AIR TERMINAL

UNIVERSAL SWIVEL AIR

TERMINAL BASE

COPPER OR ALUMINUM,

CLASS I

OR CLASS II LIGHTNING

PROTECTION CONDUCTOR

NPL LIGHTNING PROTECTION

CONDUCTORS

FASTEN COPPER CONDUCTORS

WITH COPPER STANDING SEAM

METAL ROOM FASTER. FASTEN

ALUMINUM CONDUCTORS WITH

ALUMINUM STANDING SEAM

METAL ROOF FASTENER.

LIGHTNING PROTECTION

CONDUCTORS SHALL BE

FASTENED AT INTERVALS NOT

MORE THAN 36" ON CENTER

EXTRUDED COPPER STANDING

SEAM METAL ROOF AIR TERMINAL

BASE. FOR SURFACES NOT

COMPATIBLE WITH COPPER USE

EXTRUDED ALUMINUM STANDING

SEAM METAL ROOF AIR TERMINAL

BASE. PENETRATING SCREW

HARDWARE NOT ALLOWED.

NOTES:

AIR TERMINAL SPACING SHALL CONFORM TO NFPA 780 & UL 96A REQUIREMENTS.

MATERIAL COMPATIBILITY SHALL CONFORM TO NFPA 780 & 96A REQUIREMENTS.

MATERIAL CLASS SHALL CONFORM TO NFPA 780 & UL 96A REQUIREMENTS.

AIR TERMINALS SHALL BE UL LISTED.

SHEET NO.:

SHEET CONTENTS

DO NOT SCALE DRAWINGS

ISSUED

M&H NO.:

DATE:

DRAWN BY:

CHECKED BY:

Mead & Hunt, Inc.

9600 NE Cascades Parkway, Suite 100 Portland, OR 97220 phone: 503-548-1494 meadhunt.com www.tetratech.com

711 TANK FARM ROAD, SUITE 110

SAN LUIS OBISPO, CA 93401

PHONE: (805) 542-9052 FAX: (805) 542-9254

/7 /2

:4 :4

M C

R e v it L o c a l\

-1

.0 -E

-C E

N T

R A

L -2 jr h .r v t

E-502

DETAILS

O R

A N

K in g s le y F ie ld

K la m a th

F a lls

C O

N S

T R

U C

T C

O R

R O

N C

O N

T R

O L H

A N

G A

3142200-121252.01

KAS

IMR

11/09/18

JRH

11/09/18 B-3 FINAL

NO SCALE2

AIR TERMINAL BASE

NO SCALE3

CABLE FASTENER

NO SCALE4

BI-METAL CONNECTOR

NO SCALE5

BONDING CONNECTOR

NO SCALE6

CROSS RUN CONNECTOR

NO SCALE7

PARALLEL CONNECTOR

NO SCALE8

PARALLEL CONNECTOR

NO SCALE10

GROUND ACCESS WELL

NO SCALE9

GROUND CONDUCTOR SECTION DETAIL

NO SCALE1

AIR TERMINAL - METAL SEAM ROOF

#2 GRD

#6 GRD#3/0 GRD

#3/0 GRD

CABLE TRAY

TELECOM EQUIPMENT RACK(S)

MAIN TELECOM ROOM

MAIN GROUNDING BUSBAR (TMGB)

STREET SIDE OF BUILDING

WATER METER. CONNECT TO

METALLIC WATER MAIN

WITHIN 5'-0" OF WATER

SERVICE ENTRANCE. PROVIDE

JUMPER ACROSS WATER METER.

CONCRETE FOOTING

GROUND BUS LOCATED IN

ELECTRICAL ROOM.

SWITCHBOARD

NEUTRAL BUS

PANELBOARD(S) GROUND BUS

NOTES:

1. ALL GROUND CONDUCTORS TO BE ROUTED IN PVC CONDUIT.

2. ALL GROUND CONDUCTORS ON THIS DIAGRAM SHALL BE COPPER.

3. REFER TO SHEET E-103 FOR CONNECTIONS OF LIGHTNING PROTECTION SYSTEM TO GROUND RING.

EQUIPMENT GROUNDING

CONDUCTOR

PER NEC 250.122. SEE

FEEDER SCHEDULE

GROUNDING ELECTRODE CONDUCTOR

SIZED PER NEC 250.66.

15KVA-#8 AWG

30KVA-#6 AWG

45KVA-#4 AWG

75KVA-#3 AWG

112.5KVA-#2 AWG

150KVA - #1/0 AWG

225KVA - #3/0 AWG

300KVA-#4/0 AWG

REMOVABLE LINK

TYPICAL: DRY-TYPE TRANSFORMER IN ELECTRICAL ROOMS.

SEE PLANS FOR EXACT LOCATIONS AND ROOM NUMBERS.

GROUND RING

FOUNDATION REBAR

UL LISTED FITTINGS FOR THE

PURPOSE (TYP)

REBAR STUBBED THROUGH FLOOR BY FOUNDATION

CONTRACTOR.

GROUND BUS

SWITCHBOARD

MAIN BONDING JUMPER

SIZED PER NEC 250.28(D).

GR GR GR

LEAD-LINED SIDE OF HANGAR

123 OR XRAY ROOM 104.

LEAD WRAP CONDUIT

ELBOW. PROVIDE ELBOW

ADJACENT TO WALL

CONDUIT PENETRATING LEAD WALL

LEAD LINING. SEE ARCHITECTURAL PLANS.

3"3"

UNDISTURBED EARTH

1" ABOVE SIDES OF DUCT.

CROWN DUCT TO A PEAK

CAST-IN PLACE CONCRETE

ENCASEMENT.

SECURE TOP SPACER TO PREVENT

CONDUITS FROM FLOATING DURING

CONCRETE POUR.

DUCTBANKS CONDUITS. SEE DIV.

26 SECTIONS FOR SIZES AND

QUANTITIES.

EPOXY COATED #4 REBAR;

CONTINUOUS ALONG

DUCTBANK (TYP)

CONCRETE PAVERS FOR

LEVELING

PLASTIC CONDUIT

SPACERS/SUPPORTS

DETAIL NOTES:

CONCRETE COVER DIMENSIONS SHOWN ARE MINIMUM.

DUCT BANK SHALL BE A MINIMUM OF 36" BELOW GRADE.

RED PLASTIC WARNING TAPE;

12" BELOW GRADE

1 POWER

2 POWER SPARE

SHEET NO.:

SHEET CONTENTS

DO NOT SCALE DRAWINGS

ISSUED

M&H NO.:

DATE:

DRAWN BY:

CHECKED BY:

Mead & Hunt, Inc.

9600 NE Cascades Parkway, Suite 100 Portland, OR 97220 phone: 503-548-1494 meadhunt.com www.tetratech.com

711 TANK FARM ROAD, SUITE 110

SAN LUIS OBISPO, CA 93401

PHONE: (805) 542-9052 FAX: (805) 542-9254

/7 /2

:4 :4

M C

R e v it L o c a l\

-1

.0 -E

-C E

N T

R A

L -2 jr h .r v t

E-503

DETAILS

O R

A N

K in g s le y F ie ld

K la m a th

F a lls

C O

N S

T R

U C

T C

O R

R O

N C

O N

T R

O L H

A N

G A

3142200-121252.01

KAS

IMR

11/09/18

JRH

11/09/18 B-3 FINAL

NO SCALE1

GROUNDING SYSTEM DETAIL (TYP)

NO SCALE3

CONDUIT THRU LEAD-LINED WALL DETAIL

NO SCALE2

ELECTRICAL DUCTBANK TYPICAL SECTION - 2 X 4

SHEET NO.:

SHEET CONTENTS

DO NOT SCALE DRAWINGS

ISSUED

M&H NO.:

DATE:

DRAWN BY:

CHECKED BY:

Mead &…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it.