Jordan POL_CID - FFE_CDC Submittal.pdf

Furniture, Fixtures & Equipment (FF&E)

65% Design Submittal for

Munitions Storage Area

Muwaffaq Salti Air Base

Jordan

Contract Task Order: W912ER-14-D-0003

W1912ER19F0067

JanuaSry 2020

Prepared for

U.S. Army Corps of Engineers

Middle East District (MED) Design Management

Prepared by

Herndon, Virginia charbokb Interiors

W912QR-19-D-0003

charbokb Interiors

W912ER19F0104

charbokb Interiors July 2021 charbokb Snapshot charbokb Interiors Corrected Final Design Submittal for Bulk POL Storage charbokb Interiors Comprehensive Interior Design - Furniture, Fixtures & Equipment (FF&E) Package

Contract Documents Complete for Bulk POL Storage charbokb Interiors September 17, 2021

Bulk POL Storage Contract Documents Complete

Muwaffaq Salti Air Base, Jordan September 17, 2021

Contract Task Order: JR-479505

W912QR-19-D-0003

TABLE OF CONTENTS

FURNITURE, FIXTURES & EQUIPMENT (FF&E) PACKAGE

FF&E DESIGN NARRATIVE

POINT OF CONTACT LIST

FURNITURE PLAN

JR-479505 C FILTER BUILDING

C I-110 GROUND LEVEL FURNITURE PLAN

FF&E FURNITURE LEGEND

FURNITURE ILLUSTRATION SHEETS

FURNITURE FINISHES LEGEND

FURNITURE FINISHES SAMPLE BOARDS

FF&E PACKAGE

FF&E DESIGN NARRATIVE

FF&E Design Narrative

For this project, there extent of furniture in the buildings is limited. The Filter Building is the only location that will have furniture items. The furniture selected focuses on ergonomics, durability, and sustainability, while complementing the Structural Interior Design (SID).

The items listed in this package are to be used as a basis of design. Baseline salient features have been listed for all items. This information will be utilized to make furniture selections for this project.

Filter Building

The Control Room inside the Filter Building will have one modular desk, one ergonomic task chair and one lateral file cabinet with 2 file drawers.

POINTS OF CONTACT

Point of Contact List

Mark Pratt 703.376.5216

Project Manager – Jacobs mark.pratt@jacobs.com

Andrew Haas +01.703.407.9446

Project Manager – Jacobs andrew.haas@jacobs.com

Andy Shannon 865.312.4632

Project Architect – Jacobs andy.shannon@jacobs.com

Kathryn Charboneau 703.628.2013

Interior Designer – Jacobs kathryn.charboneau@jacobs.com

Kelly Cobb 540.665.3627

Interior Designer - USACE Kelly.M.Cobb@usace.army.mil mailto:mark.pratt@jacobs.com mailto:andrew.haas@jacobs.com mailto:andy.shannon@jacobs.com mailto:kathryn.charboneau@jacobs.com mailto:Kelly.M.Cobb@usace.army.mil

FLOOR PLAN

FF&E FURNITURE LEGEND

A1 Monitor Arm, Single Flat Panel

CH1 Task Chair - General Work

DK1 Freestanding Desk

ST1 2-High Lateral File Cabinet

FF&E Furniture Legend

1100 N. Glebe Road ,Suite 500 Arlington, Virginia 22201 POC: K. Charboneau P: (703) 628-2013

Muwaffaq Salti Air Base Bulk POL Storage

Jordan

Project No: JR-479505 Contract Documents Complete

FURNITURE ILLUSTRATION SHEETS

A1 1

MODEL NUMBER Refer to salient features.

DIMENSIONS 100mm (D) x 355mm (W) x 380mm (H)

FINISHES Platinum Metallic

FURNITURE ILLUSTRATION/ORDER FORM

SINGLE FLAT PANEL, MONITOR ARM TOTAL QUANTITY:

MANUFACTURER To Meet Salient Features

SERIES

tilt to 30 degrees forward tilt.

Rotation for landscape or portrait viewing.

Includes 75mm/100mm VESA compliant mounting plate.

Weight: 6.13 kg

Built-in counter-balance tool.

SALIENT FEATURES

Single flat panel monitor arm with C-clamp bracket.

Tilt mechanism ranges from 20 degrees backward

FURNITURE INSTRUCTIONS

Field verify all dimensions, and check existing site conditions for any obstructions including but not limited to, power and data, windows, columns, thermostats, etc.

SPECIFIC COMPLIANCE

From ISO 9001 and/or ISO 17025 accredited facilities

WARRANTY

10 year minimum

ANSI/BIFMA X5.5 Desk/Table Product Tests

Sustainability: Recycled Content: 25% minimum

Recyclable Content: 100%

JORDAN

SEPTEMBER 17, 2021

MUWAFFAQ SALTI AIR BASE

BULK POL STORAGE

Standards to meet or exceed the most current environmental standards in the furniture industry.

*Image not exact. Refer to salient features*

Finish:

Platinum Metallic

A1 1

FURNITURE ILLUSTRATION/ORDER FORM

SINGLE FLAT PANEL, MONITOR ARM TOTAL QUANTITY:

LOCATIONS

BUILDING C - FILTER BUILDING

101 - CONTROL ROOM

NOTES COST

Item, style, grade, size, pattern, color, and texture are coordinated throughout the project.

UNIT COST

QUANTITY 1

MUWAFFAQ SALTI AIR BASE

BULK POL STORAGE

JORDAN

SEPTEMBER 17, 2021

SPECIAL INSTRUCTIONS ALTERNATES

In lieu of disposing furniture in a landfill at the end of its useful life, manufacturer shall provide opportunities for customer to recycle, resell or refurbish their used furniture.

*Designer of Record shall be notified if alternate products are selected to ensure function and compatibility with related items*

Basis of design is shown to establish a standard. Alternate manufacturers items are acceptable as long as the salient features for that item are met.

Provide room number on carton FREIGHT

Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.

INSTALLATION

TOTAL COST

CH1 1

WARRANTY -

MUWAFFAQ SALTI AIR BASE

BULK POL STORAGE

JORDAN

SEPTEMBER 17, 2021

for any obstructions including but not limited to, power and data, windows, columns, thermostats, etc.

ANSI/BIFMA e3 Furniture Sustainability Standards to meet or exceed the most current environmental standards in the furniture industry.

FURNITURE INSTRUCTIONS

Field verify all dimensions, and check existing site conditions

Frame & Mechanism: Min 10 yrs; Upholstery: Min 3 yrs

Fully upholstered mesh back and pad, 100% polyester

Durability: 50,000 cycles (Martindale)

Use manufacturers graded-in fabrics

SPECIFIC COMPLIANCE

Meets ANSI/BIFMA x5.1 testing standards and certs.

Meets ANSI/HFES 100 ergonomic guidelines

Overall Dimensions: 559mm to 876mm W x 533mm to

597mm D x 997mm to 1124mm H.

5 star base with universal casters

Fully Upholstered seat, 100% post-consumer recycled polyester fabric that meets Wyzenbeek test of 100,000 double-rubs.

360 degree independent height-, width-, pivot-, and depth-adjustable arms and soft arm caps.

Plastic frame, seat shell, and five-arm base.

70mm seat depth adjustment.

63mm diameter, hard-composition, dual-wheel casters (black).

Seat Uph: Cogent Connect, Graphite 5S25

Frame Finish: Light/Light

SALIENT FEATURES

Task chair with upholstered seat and wrapped back.

127mm pneumatic seat-height adjustment (406-508mm)

MODEL NUMBER Refer to salient features.

DIMENSIONS Refer to salient features.

FINISHES Back Uph: 3D Knit, Graphite 5092

FURNITURE ILLUSTRATION/ORDER FORM

TASK CHAIR - GENERAL WORK TOTAL QUANTITY:

MANUFACTURER To Meet Salient Features

SERIES

*Image not exact. Refer to salient features*

Back Upholstery:

3D Knit, Graphite

Seat Upholstery:

Woven, Graphite

Frame Finish:

Light

CH1 1

TASK CHAIR - GENERAL WORK TOTAL QUANTITY:

LOCATIONS

SEPTEMBER 17, 2021

MUWAFFAQ SALTI AIR BASE

BULK POL STORAGE

JORDAN

Basis of design is shown to establish a standard. Alternate manufacturers items are acceptable as long as the salient features for that item are met.

In lieu of disposing furniture in a landfill at the end of its useful life, manufacturer shall provide opportunities for customer to recycle, resell or refurbish their used furniture.

SPECIAL INSTRUCTIONS ALTERNATES

*Designer of Record shall be notified if alternate products are selected to ensure function and compatibility with related items*

INSTALLATION

TOTAL COST

Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.

QUANTITY 1

FREIGHT

NOTES COST

UNIT COSTItem, style, grade, size, pattern, color, and texture are coordinated throughout the project.

Provide room number on carton

BUILDING C - FILTER BUILDING

101 - CONTROL ROOM

DK1 1

casters (Dimensions: 254mm W x 463mm D x 552mm H).

• ANSI/BIFMA X5.9 Storage, ANSI/BIFMA X5.5 Table

• ANSI/BIFMA M7.1, ANSIBIFMA X7.1

• ANSI/BIFMA e3 Furniture Sustainability

• Standards to meet or exceed the most current environmental standards in the furniture industry.

• Sustainability: Recycled: Steel Content: 40% minimum

Recyclable Steel Content: 100%

MUWAFFAQ SALTI AIR BASE

BULK POL STORAGE

JORDAN

SEPTEMBER 17, 2021

for any obstructions including but not limited to, power and data, windows, columns, thermostats, etc.

WARRANTY

Furniture system 10 year minimum; Table mechanism 5 year minimum, Finishes 3 year minimum.

FURNITURE INSTRUCTIONS

Field verify all dimensions, and check existing site conditions

Weight capacity 90kg min.

SPECIFIC COMPLIANCE

From ISO 9001 and/or ISO 17025 accredited facilities

Desk height range: 574mm - 1237mm H.

Painted metal mini locker with contemporary pull and.

Locker includes one adjustable shelf.

Case construction: Sides, back and top to be 20 gauge min. cold rolled steel.

SALIENT FEATURES

High-pressure laminate, height-adjustable desk with painted metal base (Extended height).

MODEL NUMBER Refer to salient features.

DIMENSIONS Overall: 1524mm W x 762mm D

FINISHES Worksurface: Marled Micro

FURNITURE ILLUSTRATION/ORDER FORM

FREESTANDING DESK TOTAL QUANTITY:

MANUFACTURER To Meet Salient Features

SERIES

Textured Laminate

Base/Storage: Platinum Metallic

*Image not exact. Refer to salient features*

Worksurface:

Marled Micro texture

Base/Storage:

DK1 1

FREESTANDING DESK TOTAL QUANTITY:

LOCATIONS

SEPTEMBER 17, 2021

MUWAFFAQ SALTI AIR BASE

BULK POL STORAGE

JORDAN

In lieu of disposing furniture in a landfill at the end of its useful life, manufacturer shall provide opportunities for customer to recycle, resell or refurbish their used furniture.

Basis of design is shown to establish a standard. Alternate manufacturers items are acceptable as long as the salient features for that item are met.

SPECIAL INSTRUCTIONS ALTERNATES

*Designer of Record shall be notified if alternate products are selected to ensure function and compatibility with related items*

INSTALLATION

TOTAL COST

Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.

QUANTITY 1

FREIGHT

NOTES COST

UNIT COSTItem, style, grade, size, pattern, color, and texture are coordinated throughout the project.

Provide room number on carton

ST1 1

• ANSI/BIFMA X5.9 Storage

• ANSI/BIFMA M7.1, ANSI/BIFMA X7.1

• ANSI/BIFMA e3 Furniture Sustainability

• Sustainability: Recycled: Steel Content: 40%, Minimum

• Recyclable Steel Content: 100%

JORDAN

SEPTEMBER 17, 2021

MUWAFFAQ SALTI AIR BASE

BULK POL STORAGE

Lifetime, (25 years); 10 year Minimum

FURNITURE INSTRUCTIONS

Field verify all dimensions, and check existing site conditions for any obstructions including but not limited to, power and data, windows, columns, thermostats, etc.

A mechanical safety interlock system shall be included to prevent opening more than one drawer at a time. Slides shall have heavy duty, steel ball

WARRANTY

bearing suspensions.

SPECIFIC COMPLIANCE

Load capacity for each drawer shall be 68 kg min.

Case construction: Sides, back and top to be 20 constructed with 2 layers of heavy 18 gauge cold rolled steel.

Front and rear multi-formed uprights to be 18 gauge cold rolled steel.

gauge cold rolled steel (CRS). Bottoms to be

SALIENT FEATURES

2-high lateral file with (2) standard 305mm drawers

Intergral drawer pulls and 76mm base

Light Warm Gray metal paint finish on case and drawers

MODEL NUMBER Refer to salient features.

DIMENSIONS Overall: 914mm W x 457mm D

FINISHES

FURNITURE ILLUSTRATION/ORDER FORM

2-HIGH LATERAL FILE CABINET TOTAL QUANTITY:

MANUFACTURER To Meet Salient Features

SERIES

*Image not exact. Refer to salient features*

Paint/Finish:

Light Warm Gray

Metal Paint

ST1 1

2-HIGH LATERAL FILE CABINET TOTAL QUANTITY:

LOCATIONS

MUWAFFAQ SALTI AIR BASE

BULK POL STORAGE

JORDAN

SEPTEMBER 17, 2021

SPECIAL INSTRUCTIONS ALTERNATES

In lieu of disposing furniture in a landfill at the end of its useful life, manufacturer shall provide opportunities for customer to recycle, resell or refurbish their used furniture.

*Designer of Record shall be notified if alternate products are selected to ensure function and compatibility with related items*

Basis of design is shown to establish a standard. Alternate manufacturers items are acceptable as long as the salient features for that item are met.

Provide room number on carton FREIGHT

Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.

INSTALLATION

TOTAL COST

NOTES COST

Item, style, grade, size, pattern, color, and texture are coordinated throughout the project.

UNIT COST

QUANTITY 1

FURNITURE FINISHES LEGEND

F-01 Finish: Graphite Gray 3 Dimensional Knit Fabric Use: CH1 Back

F-02 Finish: Graphite Gray Woven Polyester Upholstery Use: CH1 Seat

F-03 Finish: Light Gray Use: CH1 Chair Base

F-04 Finish: Marled Micro Texture Laminate Use: DK1 Worksurface Top

F-05 Finish: Platinum Metallic Use: A1 Monitor Arm, DK1 Desk/Table Base

F-06 Finish: Light/Warm Gray Metal Paint Use: ST1 Paint Finish

Furniture Finishes Legend

1100 N. Glebe Road ,Suite 500 Arlington, Virginia 22201 POC: K. Charboneau P: (703) 628-2013

Muwaffaq Salti Air Base Bulk POL Storage

Jordan

Project No: JR-479505

FURNITURE FINISHES SAMPLE BOARDS

F-01 Graphite Gray Knit Mesh

F-02 Graphite Gray Knit

Furniture Finish Selections

1100 N. Glebe Road ,Suite 500 Arlington, Virginia 22201 POC: K. Charboneau P: (703) 628-2013

Muwaffaq Salti Air Base Bulk POL Storage

Jordan

Project No: JR-479505

F-03 Light Gray

F-04 Marled Micro Texture Laminate

Furniture Finish Selections

1100 N. Glebe Road ,Suite 500 Arlington, Virginia 22201 POC: K. Charboneau P: (703) 628-2013

Muwaffaq Salti Air Base Bulk POL Storage

Jordan

Project No: JR-479505

F-05

F-06 Light warm Gray Metal Paint

Furniture Finish Selections

1100 N. Glebe Road ,Suite 500 Arlington, Virginia 22201 POC: K. Charboneau P: (703) 628-2013

Muwaffaq Salti Air Base Bulk POL Storage

Jordan

Project No: JR-479505