Techspec_amend0008.pdf

McNar y Power house St at i on Ser vi ce Tur bi ne & Gener at or Rehab W912EF21R0002 Amend0008

PROJECT TABLE OF CONTENTS

DI VI SI ON 01 - GENERAL REQUI REMENTS

01 00 00. 00 28 GENERAL REQUI REMENTS

01 11 00. 00 26 SUMMARY OF WORK

01 11 01. 00 28 SUPPLEMENTARY REQUI REMENTS

01 14 00. 10 28 PROJECT SI TE RESTRI CTI ONS

01 14 00. 90 28 I NTEGRATI NG ANTI TERRORI SM ( AT) AND OPERATI ONS SECURI TY

(OPSEC)

01 20 00. 00 20 PRI CE AND PAYMENT PROCEDURES

01 22 00. 00 28 MEASUREMENT AND PAYMENT

01 32 01. 00 28 PROJECT SCHEDULE

01 33 00 SUBMI TTAL PROCEDURES

01 35 29. 10 28 GOVERNMENTAL SAFETY REQUI REMENTS

01 42 00 SOURCES FOR REFERENCE PUBLI CATI ONS

01 45 01. 00 28 RESI DENT MANAGEMENT SYSTEM CONTRACTOR MODE ( RMS CM)

01 45 04. 00 28 CONTRACTOR QUALI TY CONTROL

01 51 00. 00 28 TEMPORARY UTI LI TI ES

01 54 19. 10 28 USE OF GOVERNMENT CRANES

01 55 10. 00 28 CONTRACTOR WORK, ACCESS AND STORAGE AREAS

01 57 20. 00 28 ENVI RONMENTAL PROTECTI ON

01 78 00. 00 28 CLOSEOUT SUBMI TTALS

01 78 23. 00 28 OPERATI ON AND MAI NTENANCE DATA

DI VI SI ON 02 - EXI STI NG CONDI TI ONS

02 83 33. 12 28 LEAD BASED PAI NT ( LBP) REMOVAL AND DI SPOSAL

DI VI SI ON 03 - CONCRETE

03 60 00. 01 26 CONCRETE DEMOLI TI ON, REPAI R OF CONCRETE SURFACES, AND

MI NOR EQUI PMENT FOUNDATI ONS

DI VI SI ON 05 - METALS

05 05 23. 20 26 WELDING

05 05 33. 20 26 NON- DESTRUCTI VE TESTI NG

05 50 03. 20 26 METALWORK FABRI CATI ON, MACHI NE WORK, AND MI SCELLANEOUS

PROVISIONS

05 50 14. 00 26 TURBI NE MAI NTENANCE PLATFORM

DI VI SI ON 09 - FI NI SHES

09 97 02. 00 26 PAI NTI NG: HYDRAULI C STRUCTURES

DI VI SI ON 13 - SPECI AL CONSTRUCTI ON

13 48 00. 00 26 SEI SMI C RESTRAI NT FOR MECHANI CAL AND ELECTRI CAL EQUI PMENT

DI VI SI ON 22 - PLUMBI NG

22 00 00. 00 26 MECHANI CAL EQUI PMENT AND PI PI NG

DI VI SI ON 25 - I NTEGRATED AUTOMATI ON

25 05 11. 00 28 CYBERSECURITY

DI VI SI ON 26 - ELECTRI CAL

PROJECT TABLE OF CONTENTS Page 1

G4EDDRLM

Pencil

26 05 00. 00 26 BASI C ELECTRI CAL MATERI ALS AND METHODS

26 05 19. 00 26 I NSULATED WI RE AND CABLE

DI VI SI ON 41 - MATERI AL PROCESSI NG AND HANDLI NG EQUI PMENT

41 22 13. 75 26 BELOW- THE- HOOK LI FTI NG DEVI CES

DI VI SI ON 42 - PROCESS HEATI NG, COOLI NG, AND DRYI NG EQUI PMENT

42 13 19. 00 26 SURFACE AI R COOLERS FOR GENERATORS

DI VI SI ON 48 - ELECTRI CAL POWER GENERATI ON

48 08 00. 00 28 COMMI SSI ONI NG OF ELECTRI CAL POWER GENERATI ON

48 13 13. 02 26 DI SASSEMBLY AND REASSEMBLY OF HYDRAULI C TURBI NE GENERATOR

UNIT

48 13 13. 04 26 EXI STI NG TURBI NE COMPONENT, REFURBI SHMENT AND REPLACEMENT

48 13 13. 06 26 GENERATOR THRUST BEARI NG I NSPECTI ON AND REFURBI SHMENT

48 13 13. 07 26 TURBI NE AND GENERATOR GUI DE BEARI NG REFURBI SHMENT

48 13 13. 11 26 MI SCELLANEOUS PARTS, MATERI ALS, AND SERVI CES

48 13 16. 00 26 REWI ND OF HYDRAULI C- TURBI NE DRI VEN GENERATORS

48 13 16. 24 26 GENERATOR BRAKE SYSTEM MECHANI CAL WORK

48 19 26. 00 26 ROTATI NG BRUSHLESS EXCI TERS

- - End of Pr oj ect Tabl e of Cont ent s - -

PROJECT TABLE OF CONTENTS Page 2

SECTI ON TABLE OF CONTENTS

DI VI SI ON 01 - GENERAL REQUI REMENTS

SECTI ON 01 22 00. 00 28

MEASUREMENT AND PAYMENT

PART 1 GENERAL

1. 1 RETAI NAGE OF PAYMENT

1. 2 MEASUREMENT

1. 2. 1 Job Measur ement I t ems

1. 2. 2 Uni t Pr i ce Measur ement I t ems

1. 2. 3 Ser v i ces of Mi scel l aneous Hi r e I t ems f or Gover nment Di r ect ed

Work

1. 2. 4 Mi scel l aneous Wel di ng

1. 3 MOBI LI ZATI ON AND DEMOBI LI ZATI ON

1. 3. 1 I t em No. 0100 Si t e Mobi l i zat i on and Demobi l i zat i on

1. 3. 2 I t em No. 0101 Mi scel l aneous Hi r e I t ems

1. 3. 2. 1 I t em No. 0101A Mi scel l aneous Wel di ng

1. 3. 2. 2 I t em No. 0101B Machi ni st Hi r e

1. 3. 2. 3 I t em No. 0101C El ect r i c i an Hi r e

1. 3. 2. 4 I t em No. 0101D Wel di ng Ser vi ces

1. 3. 2. 5 I t em No. 0101E Pai nt er Hi r e

1. 3. 2. 6 I t em No. 0101F Ot her Ski l l ed Cr af t sman Hi r e

1. 3. 2. 7 I t em No. 0101G Gener al Labor er Hi r e

1. 3. 2. 8 I t em No. 0101H Li qui d Penet r ant Met hod

1. 3. 2. 9 I t em No. 0101I Magnet i c Par t i c l e Met hod

1. 3. 2. 10 I t em No. 0101J Ul t r asoni c Met hod

1. 3. 2. 11 I t em No. 0101K Wel d Spr ayi ng

1. 4 UNI T 1

1. 4. 1 SI TE WORK AND STRUCTURAL UNI T 1

1. 4. 1. 1 I t em No. 0102 Gener at or Rot or and Shaf t Combi nat i on Li f t i ng

Device

1. 4. 1. 2 I t em No. 0103 Pr e- Di sassembl y I nvest i gat i on and Measur ement s

1. 4. 1. 3 I t em No. 0104 Di sassembl e Tur bi ne and Gener at or Uni t and

I nspect Component s

1. 4. 1. 4 I t em No. 0105 Reassembl e Gener at i ng Uni t

1. 4. 1. 5 I t em No. 0106 Fur ni sh Cent er Hol e Jacki ng Syst em

1. 4. 1. 6 I t em No. 0107 Oper at i onal Test i ng Af t er Reassembl y of

Gener at i ng Uni t

1. 4. 1. 7 I t em No. 0108 Pr ovi de New Tur bi ne Mai nt enance Pl at f or m

1. 4. 1. 8 I t em No. 0109 Gener at or St at or Fr ame Li f t i ng Devi ces

1. 4. 1. 9 I t em No. 0110 Speci al Tool s, Handl i ng Devi ces, and

Tempor ar y Scaf f ol di ng

1. 4. 1. 10 I t em No. 0111 Di sposal of Ol d Gr ease and Gr ease Syst ems and Pi pi ng

1. 4. 1. 11 I t em No. 0112 Per f or m Lead- based Pai nt Abat ement

1. 4. 1. 12 I t em No. 0113 - 0119 Reser ved

1. 4. 2 MECHANI CAL WORK UNI T 1

1. 4. 2. 1 I t em No. 0120 New Wi cket Gat es

1. 4. 2. 2 I t em No. 0121 Runner Ref ur bi shment

1. 4. 2. 3 I t em No. 0122 Fur ni sh Upper and Lower St at i onar y and

SECTI ON 01 22 00. 00 28

Rot at i ng Wear i ng Ri ngs

1. 4. 2. 4 I t em No. 0123 Headcover Ref ur bi shment

1. 4. 2. 5 I t em No. 0124 Bot t om Ri ng Ref ur bi shment

1. 4. 2. 6 I t em No. 0125 Tur bi ne Ai r I nl et Val ve Ref ur bi shment

1. 4. 2. 7 I t em No. 0126 Fur ni sh Al l Sel f - Lubr i cat i ng Bushi ngs and

Bear i ng Pl at es

1. 4. 2. 8 I t em No. 0127 Repl acement Head Cover St uds and Nut s

1. 4. 2. 9 I t em No. 0128 Suppl y and I nst al l Tur bi ne Shaf t Sl eeve

( i ncl udi ng spar e)

1. 4. 2. 10 I t em No. 0129 Oper at i ng Ri ng Ref ur bi shment

1. 4. 2. 11 I t em No. 0130 Tur bi ne Shaf t I nspect i on

1. 4. 2. 12 I t em No. 0131 Machi ni ng of Tur bi ne Shaf t

1. 4. 2. 13 I t em No. 0132 Wi cket Gat e Oper at i ng Mechani sm Ref ur bi shment

1. 4. 2. 14 I t em No. 0133 Gat e Shaf t Ref ur bi shment

1. 4. 2. 15 I t em No. 0134 Fur ni sh Set of Wi cket Gat e Shear Pi ns

( I ncl udi ng Spar es)

1. 4. 2. 16 I t em No. 0135 Desi gn and Pr ovi de Gener at or Ai r Cool er s

1. 4. 2. 17 I t em No. 0136 Spar e Gener at or Ai r Cool er s

1. 4. 2. 18 I t em No. 0137 Desi gn and Pr ovi de Thr ust Bear i ng Oi l Cool er s

1. 4. 2. 19 I t em No. 0138 Dr af t Tube Vacuum Br eaker Pi pi ng Repl acement

1. 4. 2. 20 I t em No. 0139 Machi ni ng Wi t h Bor i ng Bar

1. 4. 2. 21 I t em No. 0140 Set up f or Machi ni ng and Machi ni ng up t o

0. 020" of St ay Ri ng t o Bot t om Ri ng Mount i ng Fl ange

1. 4. 2. 22 I t em No. 0141 Set up f or Machi ni ng and Machi ni ng up t o

0. 020" of St ay Ri ng t o Head Cover Mount i ng Fl anges

1. 4. 2. 23 I t em No. 0142 Repl ace Runner Coupl i ng Fast ener s and Key

1. 4. 2. 24 I t em No. 0143 Gener at or Ai r Br ake and Jacki ng Syst em

Refurbishment

1. 4. 2. 25 I t em No. 0144 I nspect Gener at or Br ake Ri ngs

1. 4. 2. 26 I t em No. 0145 I nspect , Shi p Equal i zer Ri ng Assembl y

1. 4. 2. 27 I t em No. 0146 Pr ovi de New Tef l on Faced PTFE Thr ust Bear i ng

Shoes, I ncl udi ng Spar es

1. 4. 2. 28 I t em No. 0147 Shi pment and Ref ur bi shment of Thr ust Bear i ng

Runner and Thr ust Col l ar I ncl udi ng Resur f ace Runni ng Faces, Resur f ace Mount i ng Faces, Fur ni sh new Bol t s/ Har dwar e. ( I ncl udi ng One Spar e)

1. 4. 2. 29 I t em No. 0148 I nspect , Shi p, and Ref ur bi sh Upper Gener at or Gui de Bear i ng

1. 4. 2. 30 I t em No. 0149 I nspect , Shi p, Ref ur bi sh Lower Gener at or Gui de Bear i ng

1. 4. 2. 31 I t em No. 0150 I nspect , Shi p, Ref ur bi sh Tur bi ne Gui de Bearing

1. 4. 2. 32 I t em No. 0151 I nspect , Shi p, Ref ur bi sh Tur bi ne Gui de Bear i ng, Spar e Bear i ng

1. 4. 2. 33 I t em No. 0152 I nspect , Spar e Upper Gener at or Gui de Bear i ng

1. 4. 2. 34 I t em No. 0153 I nspect Spar e Lower Gener at or Gui de Bear i ng

1. 4. 2. 35 I t em No. 0154 Repl ace Tur bi ne Pi t Pi pi ng and Accessor i es

1. 4. 2. 36 I t em No. 0155 Repl ace Mai n Cool i ng Wat er Pi pi ng and Val ves

1. 4. 2. 37 I t em No. 0156 - 0169 Reser ved

1. 4. 3 ELECTRI CAL WORK UNI T 1 - GENERATOR

1. 4. 3. 1 I t em No. 0170 Desi gn, Manuf act ur e, and Per f or m Vol t age

Endur ance Test i ng on 4 Pr ot ot ype Coi l s

1. 4. 3. 2 I t em No. 0171 Fur ni sh Compl et e Set of St at or Coi l s

I ncl udi ng Suppl i es and Accessor i es f or a Compl et e new Wi ndi ng I ncl udi ng Fact or y Test i ng

1. 4. 3. 3 I t em No. 0172 Fur ni sh Gener at or Spar e Par t s

1. 4. 3. 4 I t em No. 0173 Removi ng Abandoned Rot at i ng Exci t er Par t s

1. 4. 3. 5 I t em No. 0174 Fur ni sh and I nst al l New St at or Cor e

1. 4. 3. 6 I t em No. 0175 I nst al l and Test New St at or Wi ndi ng

1. 4. 3. 7 I t em No. 0176 Fur ni sh and I nst al l New Gener at or Ter mi nal Box

1. 4. 3. 8 I t em No. 0177 Cl ean and I nspect Rot or , Repl ace Rot or Fi el d

Leads, and Test Rot or Fi el d Wi ndi ngs

1. 4. 3. 9 I t em No. 0178 Per f or m Speci al Fi el d Test s

1. 4. 3. 10 I t em No. 0179 Fur ni sh Two Assembl ed spar e Pol e Assembl i es wi t h Uni ver sal Connect i ons

1. 4. 3. 11 I t em No. 0180 Fur ni sh and I nst al l Gener al Fi el d Wi r i ng, RTDs, Condui t , Gauges, and Swi t ches

1. 4. 3. 12 I t em No. 0181 - 0189 Reser ved

1. 4. 4 ELECTRI CAL WORK UNI T 1 - EXCI TER

1. 4. 4. 1 I t em No. 0190 Desi gn, Manuf act ur e, Test , and Del i ver

Rot at i ng Br ushl ess Exci t at i on Syst ems and Appur t enances

1. 4. 4. 2 I t em No. 0191 Di sassembl e and Remove Exi st i ng Exci t at i on

System

1. 4. 4. 3 I t em No. 0192 I nst al l and Test Exci t at i on Syst ems and

Appurtenances

1. 4. 4. 4 I t em No. 0193 Per f or m Speci al Fact or y Test s

1. 4. 4. 5 I t em No. 0194 Per f or m Speci al Fi el d Test s

1. 4. 4. 6 I t em No. 0195 Fur ni sh Speci al Tool s and Spar e Par t s

1. 4. 4. 7 I t em No. 0196 Pr ovi de Tr ai ni ng

1. 4. 4. 8 I t em No. 0197 Per f or m Model Val i dat i on Test i ng and Pr ovi de

Reports

1. 4. 4. 9 I t em No. 0198 Concr et e Removal and Repai r

1. 4. 4. 10 I t em No. 0199 Reser ved

1. 5 UNI T 2

1. 5. 1 SI TE WORK AND STRUCTURAL UNI T 2

1. 5. 1. 1 I t em No. 0200 Pr e- Di sassembl y I nvest i gat i on and Measur ement s

1. 5. 1. 2 I t em No. 0201 Di sassembl e Gener at or Uni t and I nspect

Components

1. 5. 1. 3 I t em No. 0202 Reassembl e Gener at i ng Uni t

1. 5. 1. 4 I t em No. 0203 Di sposal of Ol d Gr ease and Gr ease Syst ems and

Piping

1. 5. 1. 5 I t em No. 0204 Oper at i onal Test i ng Af t er Reassembl y of

Generating

1. 5. 1. 6 I t em No. 0205 Bel ow- t he- Hook Li f t i ng Devi ces

1. 5. 1. 7 I t em No. 0206 Per f or m Lead- based Pai nt Abat ement

1. 5. 1. 8 I t em No. 0207 - 0210 Reser ved

1. 5. 2 MECHANI CAL WORK UNI T 2

1. 5. 2. 1 I t em No. 0211 New Wi cket Gat es

1. 5. 2. 2 I t em No. 0212 Runner Ref ur bi shment

1. 5. 2. 3 I t em No. 0213 Fur ni sh Upper and Lower St at i onar y Rot at i ng

Wear i ng Ri ngs

1. 5. 2. 4 I t em No. 0214 Headcover Ref ur bi shment

1. 5. 2. 5 I t em No. 0215 Bot t om Ri ng Ref ur bi shment

1. 5. 2. 6 I t em No. 0216 Tur bi ne Ai r I nl et Val ve Ref ur bi shment

1. 5. 2. 7 I t em No. 0217 Fur ni sh Al l Sel f - Lubr i cat i ng Bushi ngs and

Bear i ng Pl at es

1. 5. 2. 8 I t em No. 0218 Repl acement Head Cover St uds and Nut s

1. 5. 2. 9 I t em No. 0219 Suppl y and I nst al l Tur bi ne Shaf t Sl eeve

1. 5. 2. 10 I t em No. 0220 Oper at i ng Ri ng Ref ur bi shment

1. 5. 2. 11 I t em No. 0221 Tur bi ne Shaf t I nspect i on

1. 5. 2. 12 I t em No. 0222 Machi ni ng of Tur bi ne Shaf t

1. 5. 2. 13 I t em No. 0223 Wi cket Gat e Oper at i ng Mechani sm Ref ur bi shment

1. 5. 2. 14 I t em No. 0224 Gat e Shaf t Ref ur bi shment

1. 5. 2. 15 I t em No. 0225 Fur ni sh Set of Wi cket Gat e Shear Pi ns

1. 5. 2. 16 I t em No. 0226 Desi gn and Pr ovi de Gener at or Ai r Cool er s

1. 5. 2. 17 I t em No. 0227 Desi gn and Pr ovi de Thr ust Bear i ng Oi l Cool er s

1. 5. 2. 18 I t em No. 0228 Dr af t Tube Vacuum Br eaker Pi pi ng Repl acement

1. 5. 2. 19 I t em No. 0229 Machi ni ng Wi t h Bor i ng Bar

1. 5. 2. 20 I t em No. 0230 Set up f or Machi ni ng and Machi ni ng up t o

0. 020" of St ay Ri ng t o Bot t om Ri ng Mount i ng Fl ange

1. 5. 2. 21 I t em No. 0231 Set up f or Machi ni ng and Machi ni ng up t o

0. 020" of St ay Ri ng t o Head Cover Mount i ng Fl anges

1. 5. 2. 22 I t em No. 0232 Repl ace Runner Coupl i ng Fast ener s and Key

1. 5. 2. 23 I t em No. 0233 Gener at or Ai r Br ake and Jacki ng Syst em

Refurbishment

1. 5. 2. 24 I t em No. 0234 I nspect Gener at or Br ake Ri ngs

1. 5. 2. 25 I t em No. 0235 I nspect , Shi p Equal i zer r i ng assembl y

1. 5. 2. 26 I t em No. 0236 Pr ovi de New Tef l on Faced PTFE Thr ust Bear i ng

Shoes

1. 5. 2. 27 I t em No. 0237 Shi pment and Ref ur bi shment of Thr ust Bear i ng

Runner and Thr ust Col l ar I ncl udi ng Resur f ace Runni ng Faces, Resur f ace Mount i ng Faces, Fur ni sh New Bol t s/ Har dwar e.

1. 5. 2. 28 I t em No. 0238 I nspect , Shi p, and Ref ur bi sh Upper Gener at or Gui de Bear i ng

1. 5. 2. 29 I t em No. 0239 I nspect , Shi p, Ref ur bi sh Lower Gener at or Gui de Bear i ng

1. 5. 2. 30 I t em No. 0240 I nspect , Shi p, Ref ur bi sh Tur bi ne Gui de Bearing

1. 5. 2. 31 I t em No. 0241 Repl ace Tur bi ne Pi t Pi pi ng and Accessor i es

1. 5. 2. 32 I t em No. 0242 Repl ace Mai n Cool i ng Wat er Pi pi ng and Val ves

1. 5. 2. 33 I t em No. 0243 - 0253 Reser ved

1. 5. 3 ELECTRI CAL WORK UNI T 2 - GENERATOR

1. 5. 3. 1 I t em No. 0254 Fur ni sh Compl et e Set Of St at or Coi l s

I ncl udi ng Suppl i es and Accessor i es For A Compl et e New Wi ndi ng I ncl udi ng Fact or y Test i ng

1. 5. 3. 2 I t em No. 0255 Removi ng Abandoned Rot at i ng Exci t er Par t s

1. 5. 3. 3 I t em No. 0256 Fur ni sh and I nst al l New St at or Cor e

1. 5. 3. 4 I t em No. 0257 I nst al l and Test New St at or Wi ndi ng

1. 5. 3. 5 I t em No. 0258 Fur ni sh and I nst al l New Gener at or Ter mi nal Box

1. 5. 3. 6 I t em No. 0259 Cl ean and I nspect Rot or , Repl ace Rot or Fi el d

Leads, and Test Rot or Fi el d Wi ndi ngs

1. 5. 3. 7 I t em No. 0260 Fur ni sh and I nst al l Gener al Fi el d Wi r i ng, RTDs, Condui t , Gauges, and Swi t ches

1. 5. 3. 8 I t em No. 0261 - 0269 Reser ved

1. 5. 4 ELECTRI CAL WORK UNI T 2 - EXCI TER

1. 5. 4. 1 I t em No. 0270 Desi gn, Manuf act ur e, Test , and Del i ver

Rot at i ng Br ushl ess Exci t at i on Syst ems and Appur t enances

1. 5. 4. 2 I t em No. 0271 Di sassembl e and Remove Exi st i ng Exci t at i on

System

1. 5. 4. 3 I t em No. 0272 I nst al l and Test Rot at i ng Br ushl ess

Exci t at i on Syst ems and Appur t enances

1. 5. 4. 4 I t em No. 0273 Per f or m Speci al Fact or y Test s

1. 5. 4. 5 I t em No. 0274 Per f or m Speci al Fi el d Test s

1. 5. 4. 6 I t em No. 0275 Not Used

1. 5. 4. 7 I t em No. 0276 Concr et e Removal and Repai r

1. 5. 4. 8 I t em No. 0277 - 0299 Reser ved

1. 6 OPTI ONAL I TEMS

1. 6. 1 I t em No. 0300 Rei nsul at e Rot or Fi el d Pol e Assembl i es wi t h Cl ass

F I nsul at i on ( Opt i onal )

1. 6. 2 I t em No. 0301 Gener at or Br ake Ri ng Ref ur bi shment ( Opt i onal )

1. 6. 3 I t em No. 0302 Addi t i onal St ay Ri ng t o Head Cover Mount i ng

Sur f ace Machi ni ng, . 010" ( Opt i onal )

1. 6. 4 I t em No. 0303 Addi t i onal St ay Ri ng t o Bot t om Ri ng Fl ange

Machi ni ng, . 010" ( Opt i onal )

1. 6. 5 I t em No. 0304 Addi t i onal Head Cover t o St ay Ri ng Fl ange

Machi ni ng, . 010" ( Opt i onal )

1. 6. 6 I t em No. 0305 Col l ect or Ri ng Ref ur bi shment ( Opt i onal )

1. 6. 7 I t em No. 0306 Col l ect or Ri ng Repl acement ( Opt i onal )

1. 6. 8 I t em No. 0307 Br ush Ri ggi ng Ref ur bi shment ( Opt i onal

1. 6. 9 I t em No. 0308 Exci t er Shaf t Ref ur bi shment ( Opt i onal )

1. 6. 10 I t em No. 0309 Fur ni sh and I nst al l PDA Syst em ( Opt i onal )

1. 6. 11 I t em No. 0310 Br ush Ri ggi ng Repl acement ( Opt i onal )

1. 6. 12 I t em No. 0311 Exci t er Shaf t Repl acement ( Opt i onal )

1. 6. 13 I t em No. 0312 PMG 360 Degr ee Pl at f or m I nst al l at i on ( Opt i onal )

1. 6. 14 I t em No. 0313 Addi t i onal Bot t om Ri ng Machi ni ng ( Opt i onal )

PART 2 PRODUCTS ( Not Appl i cabl e)

PART 3 EXECUTI ON ( Not Appl i cabl e)

- - End of Sect i on Tabl e of Cont ent s - -

SECTI ON 01 22 00. 00 28

SECTI ON 01 22 00. 00 28

MEASUREMENT AND PAYMENT

PART 1 GENERAL

I n each i nst ance, t he cont r act pr i ce f or an i t em shal l const i t ut e f ul l compensat i on f or f ur ni shi ng al l pl ant , l abor , equi pment , and mat er i al s, and f or per f or mi ng al l oper at i ons r equi r ed t o compl et e t he wor k i ncl uded i n t he i t em as her ei n speci f i ed, or as ot her wi se appr oved.

1. 1 RETAI NAGE OF PAYMENT

Ret ai nage i n t he amount of 10 per cent of or i gi nal cont r act awar d amount wi l l be wi t hhel d unt i l t he f i nal submi t t al s, l i s t ed bel ow, have been appr oved by t he Gover nment . The 10 per cent r et ai nage f or f i nal submi t t al s wi l l be hel d unt i l such t i me as t he Cont r act or has ear ned 90 per cent of t he or i gi nal cont r act val ue. See SECTI ON 01 78 00. 00 28 " CLOSEOUT SUBMI TTALS" f or addi t i onal i nf or mat i on.

a. Fi nal Shop Dr awi ngs.

b. Fi nal As- bui l t Dr awi ngs.

c. Fi nal Recor d Dr awi ngs.

d. Ret ur n of Gover nment I ssued I t ems.

e. Fi nal Oper at i on and Mai nt enance Manual s and Par t s Cat al ogs.

f . Fi nal Spar e Par t s submi ssi on.

1. 2 MEASUREMENT

1. 2. 1 Job Measur ement I t ems

Measur ement i t ems f or t he wor k of t hi s cont r act f or whi ch cont r act j ob payment s wi l l be made ar e l i s t ed i n t he bi d schedul e and descr i bed bel ow.

Al l cost s f or i t ems of wor k, whi ch ar e not speci f i cal l y ment i oned t o be i ncl uded i n a par t i cul ar j ob or uni t pr i ce ( EA) measur ement i t em, shal l be i ncl uded i n t he l i s t ed j ob i t em most c l osel y associ at ed wi t h t he wor k i nvol ved. The j ob pr i ce f or each i t em l i s t ed shal l const i t ut e f ul l compensat i on f or f ur ni shi ng al l pl ant , l abor , mat er i al s, and equi pment , and per f or mi ng any associ at ed Cont r act or qual i t y cont r ol , envi r onment al pr ot ect i on, meet i ng saf et y r equi r ement s, t est s and r epor t s, and f or per f or mi ng al l wor k r equi r ed f or whi ch separ at e payment i s not ot her wi se provided.

1. 2. 2 Uni t Pr i ce Measur ement I t ems

Measur ement i t ems f or t he wor k of t hi s cont r act on whi ch t he cont r act uni t pr i ce payment s wi l l be made ar e l i s t ed i n t he bi d schedul e and descr i bed bel ow. The uni t pr i ce f or each i t em l i s t ed shal l const i t ut e f ul l compensat i on f or f ur ni shi ng al l pl ant , l abor , mat er i al s, and equi pment , and per f or mi ng any associ at ed Cont r act or qual i t y cont r ol , envi r onment al pr ot ect i on, meet i ng saf et y r equi r ement s, t est s and r epor t s, and f or per f or mi ng al l wor k r equi r ed f or each of t he uni t pr i ce i t ems.

1. 2. 3 Ser vi ces of Mi scel l aneous Hi r e I t ems f or Gover nment Di r ect ed Wor k

Machi ni st hi r e, el ect r i c i an hi r e, wel di ng ser vi ces, pai nt er hi r e, ot her ski l l ed cr af t sman hi r e, gener al l abor er hi r e, l i qui d penet r ant met hod, magnet i c par t i c l e met hod, ul t r asoni c met hod, r adi ogr aphi c met hod, and t her mal spr ayi ng measur ement of t i me wi l l be uni t s of man- hour s, wi t h a man- hour def i ned as one per son wor ki ng as di r ect ed f or a per i od of 60 mi nut es. To qual i f y as ser vi ces of mi scel l aneous hi r e, t he di r ect ed wor k wi l l be addi t i onal t o t hat necessar y t o compl y wi t h speci f i cat i ons r equi r ement s. Ti me wi l l be comput ed by r oundi ng of f t o t he next hi gher one- hal f ( 1/ 2) hour . No separ at e measur ement f or super vi s i on, hel per l abor , over head and/ or ot her mar kups wi l l be made as t hey ar e i nci dent al t o t he ser vi ce bei ng f ur ni shed.

1. 2. 4 Mi scel l aneous Wel di ng

Mi scel l aneous wel di ng wi l l be measur ed as t he number of pounds of wel di ng r od or wi r e pl aced.

1. 3 MOBI LI ZATI ON AND DEMOBI LI ZATI ON

1. 3. 1 I t em No. 0100 Si t e Mobi l i zat i on and Demobi l i zat i on

Payment f or s i t e mobi l i zat i on and demobi l i zat i on wi l l be made at t he cont r act j ob basi s under I t em No. 0100. Payment wi l l be at a r at e of 60 per cent f or mobi l i zat i on and 40 per cent f or demobi l i zat i on, whi ch pr i ce and payment shal l be f ul l compensat i on f or mobi l i z i ng and demobi l i z i ng al l pl ant and equi pment r equi r ed f or per f or mance of t he wor k, as speci f i ed and appr oved as wel l as f or payment of per f or mance bonds.

Mobi l i zat i on wi l l be consi der ed compl et e when t he uni t i s dewat er ed and t he Cont r act or has t he equi pment and manpower onsi t e and r eady t o begi n uni t disassembly.

Demobi l i zat i on wi l l be consi der ed compl et e when t he Cont r act or has r emoved al l const r uct i on equi pment , c l eaned t he ar ea and r est or ed t he wor k ar ea t o " as f ound" pr e cont r act condi t i ons, unl ess ot her wi se appr oved.

1. 3. 2 I t em No. 0101 Mi scel l aneous Hi r e I t ems

1. 3. 2. 1 I t em No. 0101A Mi scel l aneous Wel di ng

Payment f or mi scel l aneous wel di ng wi l l be made on a per pound basi s under I t em No. 0101A. Payment shal l i ncl ude l abor , mat er i al , and equi pment as r equi r ed i n accor dance wi t h t he speci f i cat i ons.

1. 3. 2. 2 I t em No. 0101B Machi ni st Hi r e

Payment f or machi ni st hi r e wi l l be made on an hour l y basi s under I t em No.

0101B. Payment shal l i ncl ude l abor , mat er i al , and equi pment as r equi r ed i n accor dance wi t h t he speci f i cat i onsext

1. 3. 2. 3 I t em No. 0101C El ect r i c i an Hi r e

Payment f or el ect r i c i an hi r e wi l l be made on an hour l y basi s under I t em No.

0101C. Payment shal l i ncl ude l abor , mat er i al , and equi pment as r equi r ed i n accor dance wi t h t he speci f i cat i ons.

1. 3. 2. 4 I t em No. 0101D Wel di ng Ser vi ces

Payment f or wel di ng ser vi ces wi l l be made on an hour l y basi s under I t em No.

0101D. Payment shal l i ncl ude l abor , mat er i al , and equi pment as r equi r ed i n accor dance wi t h t he speci f i cat i ons.

1. 3. 2. 5 I t em No. 0101E Pai nt er Hi r e

Payment f or pai nt hi r e wi l l be made on an hour l y basi s under I t em No.

0101E. Payment shal l i ncl ude l abor , mat er i al , and equi pment as r equi r ed i n accor dance wi t h t he speci f i cat i ons.

1. 3. 2. 6 I t em No. 0101F Ot her Ski l l ed Cr af t sman Hi r e

Payment f or gener al l abor hi r e wi l l be made on an hour l y basi s under I t em No. 0101F. Payment shal l i ncl ude l abor , mat er i al , and equi pment as r equi r ed i n accor dance wi t h t he speci f i cat i ons.

1. 3. 2. 7 I t em No. 0101G Gener al Labor er Hi r e

Payment f or gener al l abor hi r e wi l l be made on an hour l y basi s under I t em No. 0101G. Payment shal l i ncl ude l abor , mat er i al , and equi pment as r equi r ed i n accor dance wi t h t he speci f i cat i ons.

1. 3. 2. 8 I t em No. 0101H Li qui d Penet r ant Met hod

Payment f or l i qui d penet r ant met hod wi l l be made on an hour l y basi s under I t em No. 0101H. Payment shal l i ncl ude l abor , mat er i al , and equi pment as r equi r ed i n accor dance wi t h t he speci f i cat i ons.

1. 3. 2. 9 I t em No. 0101I Magnet i c Par t i c l e Met hod

Payment f or magnet i c par t i c l e met hod wi l l be made on an hour l y basi s under I t em No. 0101I . Payment shal l i ncl ude l abor , mat er i al , and equi pment as r equi r ed i n accor dance wi t h t he speci f i cat i ons.

1. 3. 2. 10 I t em No. 0101J Ul t r asoni c Met hod

Payment f or ul t r asoni c met hod wi l l be made on an hour l y basi s under I t em No. 0101J. Payment shal l i ncl ude l abor , mat er i al , and equi pment as r equi r ed i n accor dance wi t h t he speci f i cat i ons.

1. 3. 2. 11 I t em No. 0101K Wel d Spr ayi ng

Payment f or wel d spr ayi ng wi l l be made on an hour l y basi s under I t em No.

0101K. Payment shal l i ncl ude l abor , mat er i al , and equi pment as r equi r ed i n accor dance wi t h t he speci f i cat i ons.

1. 4 UNI T 1

1. 4. 1 SI TE WORK AND STRUCTURAL UNI T 1

1. 4. 1. 1 I t em No. 0102 Gener at or Rot or and Shaf t Combi nat i on Li f t i ng Devi ce

Payment f or r epl acement of t he Gener at or Rot or and Shaf t Combi nat i on Li f t i ng Devi ce wi l l be made on a j ob basi s under Li ne I t em 0102. Payment i ncl udes l abor , mat er i al , and equi pment r equi r ed t o pr ovi de t he Gener at or Rot or and Shaf t Combi nat i on Li f t i ng Devi ce i n accor dance wi t h t he specifications.

1. 4. 1. 2 I t em No. 0103 Pr e- Di sassembl y I nvest i gat i on and Measur ement s

Payment f or pr e- di sassembl y i nvest i gat i on and measur ement s wi l l be made on a per uni t basi s under Li ne I t em 0103. Payment i ncl udes l abor , mat er i al , and equi pment r equi r ed t o per f or m i nvest i gat i ons, pr e- di sassembl y oper at i onal t est i ng, and un- wat er ed uni t i nspect i ons and measur ement s i n accor dance wi t h t he speci f i cat i ons. For addi t i onal i nf or mat i on see SECTI ON 48 13 13. 02 26.

1. 4. 1. 3 I t em No. 0104 Di sassembl e Tur bi ne and Gener at or Uni t and I nspect Components

Payment f or di sassembl i ng t ur bi ne and gener at or uni t and i nspect i on wi l l be made on a j ob basi s under I t em No. 0104. Payment shal l i ncl ude l abor , mat er i al , and equi pment r equi r ed t o di sassembl e t he uni t i n accor dance wi t h t he speci f i cat i ons.

1. 4. 1. 4 I t em No. 0105 Reassembl e Gener at i ng Uni t

Payment f or r eassembl i ng gener at or uni t wi l l be made on a j ob basi s under I t em No. 0105. Payment shal l i nc l ude l abor , mat er i al , and equi pment r equi r ed t o r eassembl e t he uni t i n accor dance wi t h t he speci f i cat i ons.

1. 4. 1. 5 I t em No. 0106 Fur ni sh Cent er Hol e Jacki ng Syst em

Payment f or f ur ni shi ng cent er hol e j acki ng syst em wi l l be made on a j ob basi s under I t em No. 0106. Payment shal l i ncl ude l abor , mat er i al , and equi pment t o f ur ni sh one cent er hol e j acki ng syst em i n accor dance wi t h t he speci f i cat i ons. Onl y one syst em per pr oj ect .

1. 4. 1. 6 I t em No. 0107 Oper at i onal Test i ng Af t er Reassembl y of Gener at i ng Unit

Payment f or oper at i onal t est i ng af t er r eassembl y of gener at i ng uni t wi l l made on a j ob basi s under I t em No. 0107. Payment i ncl udes l abor , mat er i al , and equi pment r equi r ed t o per f or m t est i ng af t er r eassembl y of t he gener at i ng uni t i ncl udi ng as a mi ni mum, syst em and component t est s, el ect r i cal t est s, post - over haul oper at i onal t est i ng, and 72- hour oper at i onal t est i n accor dance wi t h t he Cont r act or ' s appr oved st ar t up pr ocedur e and i n accor dance wi t h t he speci f i cat i ons.

1. 4. 1. 7 I t em No. 0108 Pr ovi de New Tur bi ne Mai nt enance Pl at f or m

Payment f or pr ovi di ng new t ur bi ne mai nt enance pl at f or m wi l l made on a j ob basi s under I t em No. 0108. Payment shal l i ncl ude l abor , mat er i al , and equi pment t o pr ovi de a new Tur bi ne Mai nt enance Pl at f or m i ncl udi ng engi neer i ng cal cul at i ons, st amped dr awi ngs, and compl et e pl at f or m Onl y one pl at f or m shal l be made f or t he pr oj ect .

1. 4. 1. 8 I t em No. 0109 Gener at or St at or Fr ame Li f t i ng Devi ces

Payment f or r epl acement of t he Gener at or St at or Fr ame Li f t i ng Devi ces wi l l be made on a j ob basi s under Li ne I t em 0108. Payment i ncl udes l abor , mat er i al , and equi pment r equi r ed t o pr ovi de t he gener at or st at or f r ame l i f t i ng devi ces i n accor dance wi t h t he speci f i cat i ons.

1. 4. 1. 9 I t em No. 0110 Speci al Tool s, Handl i ng Devi ces, and Tempor ar y Scaffolding

Payment f or Speci al Tool s, Handl i ng Devi ces, and Scaf f ol di ng wi l l be made on a j ob basi s under Li ne I t em 0110. Payment i ncl udes al l engi neer i ng desi gn, const r uct i on, l abor , mat er i al , equi pment , and t r anspor t at i on r equi r ed f or t he desi gn, manuf act ur e, i nspect i on, and t est i ng i n accor dance wi t h t he speci f i cat i ons.

1. 4. 1. 10 I t em No. 0111 Di sposal of Ol d Gr ease and Gr ease Syst ems and Pi pi ng

Payment f or Di sposal of ol d gr ease and gr ease syst ems and pi pi ng wi l l be made on a j ob basi s under Li ne I t em 0111. Payment i ncl udes al l l abor , mat er i al , equi pment , and t r anspor t at i on r equi r ed t o c l ean up ol d gr ease, r emove ol d gr ease component s and pi pi ng, and pr oper l y di spose i n accor dance wi t h t he speci f i cat i ons.

1. 4. 1. 11 I t em No. 0112 Per f or m Lead- based Pai nt Abat ement

Payment f or abat ement of Lead- based pai nt wi l l be made on a j ob basi s under Li ne I t em 0112. Payment i ncl udes al l l abor , mat er i al , equi pment , and t r anspor t at i on r equi r ed f or t he r emoval of Lead- based pai nt f r om component s bei ng r eused and pr oper di sposal of i n accor dance wi t h t he speci f i cat i ons and al l s t at e and f eder al l aws

1. 4. 1. 12 I t em No. 0113 - 0119 Reser ved

1. 4. 2 MECHANI CAL WORK UNI T 1

1. 4. 2. 1 I t em No. 0120 New Wi cket Gat es

Payment f or New Wi cket Gat es wi l l be made on a per uni t basi s under Li ne I t em 0120. Payment i ncl udes desi gn, f abr i cat i on, l abor , mat er i al , and equi pment r equi r ed t o suppl y and i nst al l t he wi cket gat es i n accor dance wi t h t he speci f i cat i ons and del i ver y t o t he pr oj ect . ( I ncl udes Spar es) .

1. 4. 2. 2 I t em No. 0121 Runner Ref ur bi shment

Payment f or Runner Ref ur bi shment wi l l be made on a per uni t basi s under Li ne I t em 0121. Payment i ncl udes l abor , mat er i al , and equi pment r equi r ed t o i nspect , r ef ur bi sh t he r unner , i nst al l new r ot at i ng wear i ng r i ngs, and pai nt t he exi st i ng r unner i n accor dance wi t h t he speci f i cat i ons and del i ver y t o t he pr oj ect .

1. 4. 2. 3 I t em No. 0122 Fur ni sh Upper and Lower St at i onar y and Rot at i ng Wear i ng Ri ngs

Payment f or Upper and Lower St at i onar y and Rot at i ng Wear i ng Ri ngs wi l l be made on a per uni t basi s under Li ne I t em 0122. Payment i ncl udes l abor , mat er i al , equi pment , and t r anspor t at i on r equi r ed t o f ur ni sh upper and l ower wear i ng r i ngs and f ast ener s i n accor dance wi t h t he speci f i cat i ons.

1. 4. 2. 4 I t em No. 0123 Headcover Ref ur bi shment

Payment f or Headcover Ref ur bi shment wi l l be made on a per uni t basi s under Li ne I t em 0123. Payment i ncl udes l abor , mat er i al , and equi pment r equi r ed t o i nspect t he headcover and r epor t f i ndi ngs, r ef ur bi shment of gat e st em seal r i ng r et ai ner s, i nst al l at i on of wi cket gat e bushi ngs and bear i ng pl at es, i nst al l at i on of wear i ng r i ng, machi ni ng of mount i ng sur f aces, r epl acement and machi ni ng of upper f aci ng pl at es, i nspect i on i ncl udi ng NDT i nspect i ons, packi ng box r epai r , r epl acement gl and and H- r i ng, Pai nt i ng, et c, i n accor dance wi t h t he speci f i cat i ons. Payment i ncl udes r oundt r i p t r anspor t at i on of t he head cover .

1. 4. 2. 5 I t em No. 0124 Bot t om Ri ng Ref ur bi shment

Payment f or Bot t om Ri ng Ref ur bi shment wi l l be made on a per uni t basi s under Li ne I t em 0124. Payment i ncl udes l abor , mat er i al , and equi pment r equi r ed t o r ef ur bi sh each bot t om r i ng i ncl udi ng i nspect i on and r epor t of f i ndi ngs, i nst al l at i on of t he r epl acement st at i onar y wear i ng r i ngs, i nst al l at i on of wi cket gat e bushi ngs, r epl acement and machi ni ng of l ower f aci ng pl at es, pai nt i ng, and machi ni ng of mount i ng sur f aces i n accor dance wi t h t he speci f i cat i ons. Payment i ncl udes r oundt r i p t r anspor t at i on of t he bot t om r i ng.

1. 4. 2. 6 I t em No. 0125 Tur bi ne Ai r I nl et Val ve Ref ur bi shment

Payment f or Tur bi ne Ai r I nl et Val ve Ref ur bi shment wi l l be made on a per uni t basi s under Li ne I t em 0125. Payment i ncl ude l abor , mat er i al , equi pment , and t r anspor t at i on r equi r ed t o r ef ur bi sh t he t ur bi ne ai r i nl et val ve i ncl udi ng but not be l i mi t ed t o i nspect i on, r ef ur bi shment of mat i ng sur f aces, r epl acement of gr eased bushi ngs wi t h sel f l ubr i cat i ng bushi ngs, r epl aci ng packi ng, o- r i ngs gasket s, pai nt i ng, and addi t i onal r ef ur bi shment s as r equi r ed and per f or m l eakage t est s as shown on t he dr awi ngs and i n accor dance wi t h t he speci f i cat i ons.

1. 4. 2. 7 I t em No. 0126 Fur ni sh Al l Sel f - Lubr i cat i ng Bushi ngs and Bear i ng Plates

Payment f or Fur ni sh and I nst al l Al l Sel f - Lubr i cat i ng Bushi ngs and Bear i ng Pl at es wi l l be made on a per uni t basi s under Li ne I t em 0126. Payment i ncl udes l abor , mat er i al , and equi pment r equi r ed t o f ur ni sh al l sel f - l ubr i cat i ng bushi ngs i ncl udi ng but not l i mi t ed t o bushi ngs ( gui de bear i ngs) , gui de bear i ng pl at e ( r i ngs, st r i ps, pads) , t hr ust bear i ng pl at e ( pads) , t hr ust bushi ngs ( washer s, r i ngs, di scs) , and r equi r ed mount i ng har dwar e, t o r ef ur bi sh al l exi st i ng gr ease- l ubr i cat ed component s i n t he wi cket gat es oper at i ng mechani sm and t ur bi ne vacuum br eaker val ve i n accor dance wi t h t he speci f i cat i ons. ( Thi s i ncl udes spar es) .

1. 4. 2. 8 I t em No. 0127 Repl acement Head Cover St uds and Nut s

Payment f ur ni sh Repl acement Head Cover St uds and Nut s wi l l be made on a per uni t basi s under Li ne I t em 0127. Payment shal l i nc l ude l abor , mat er i al , and equi pment r equi r ed t o f ur ni sh r epl acement head cover st uds and nut s accor dance wi t h t he speci f i cat i ons and del i ver y t o t he pr oj ect .

1. 4. 2. 9 I t em No. 0128 Suppl y and I nst al l Tur bi ne Shaf t Sl eeve ( i ncl udi ng spare)

Payment f or Tur bi ne Shaf t Sl eeve wi l l be made on a per uni t basi s under Li ne I t em 0128. Payment shal l i nc l ude l abor , mat er i al , and equi pment r equi r ed t o manuf act ur e t he shaf t s l eeve i n accor dance wi t h t he speci f i cat i ons and del i ver y t o t he pr oj ect .

1. 4. 2. 10 I t em No. 0129 Oper at i ng Ri ng Ref ur bi shment

Payment f or Oper at i ng Ri ng Ref ur bi shment wi l l be made on a per uni t basi s under Li ne I t em 0129. Payment i nc l udes l abor , mat er i al , equi pment and t r anspor t at i on r equi r ed t o r ef ur bi sh t he oper at i ng r i ng i ncl udi ng but not be l i mi t ed t o i nspect i on, machi ni ng, i nst al l at i on of bushi ngs, pai nt i ng, and addi t i onal modi f i cat i ons as r equi r ed i n accor dance wi t h t he specifications.

1. 4. 2. 11 I t em No. 0130 Tur bi ne Shaf t I nspect i on

Payment f or Tur bi ne Shaf t I nspect i on wi l l be made on a per uni t basi s under Li ne I t em 0130. Payment i ncl udes l abor , mat er i al , and equi pment r equi r ed t o i nspect t he t ur bi ne shaf t i ncl udi ng but not be l i mi t ed t o i nspect i on, t est i ng, c l eani ng, and j our nal measur ement s as shown on t he dr awi ngs and i n accor dance wi t h t he speci f i cat i ons.

1. 4. 2. 12 I t em No. 0131 Machi ni ng of Tur bi ne Shaf t

Payment f or Machi ni ng of Tur bi ne Shaf t wi l l be made on a per uni t basi s under Li ne I t em 0131. Payment i nc l udes l abor , mat er i al , equi pment and t r anspor t at i on r equi r ed f or t ur bi ne shaf t machi ni ng bel ow t he shaf t s l eeve, t he r unner key- way. I f necessar y, a l i ght machi ni ng cut shal l be made on t he sur f aces bel ow t he packi ng box s l eeve f or t he pur pose of r emovi ng exi st i ng cor r osi on.

1. 4. 2. 13 I t em No. 0132 Wi cket Gat e Oper at i ng Mechani sm Ref ur bi shment

Payment f or Wi cket Gat e Oper at i ng Mechani sm Ref ur bi shment wi l l be made on a per uni t basi s under Li ne I t em 0132. Payment i ncl udes l abor , mat er i al , equi pment , and t r anspor t at i on r equi r ed t o r ef ur bi sh t he wi cket gat e oper at i ng mechani sm i ncl udi ng but not be l i mi t ed t o i nspect i on, r epl aci ng pi ns and t hr ust sur f aces wi t h st ai nl ess st eel component s, r ef ur bi shment of gat e l i nkage component sur f aces, r epl acement of mi scel l aneous component s, i nst al l at i on of connect i ng r od and l i nkage bushi ngs, as shown on t he dr awi ngs and i n accor dance wi t h t he speci f i cat i ons.

1. 4. 2. 14 I t em No. 0133 Gat e Shaf t Ref ur bi shment

Payment f or Gat e Shaf t Ref ur bi shment wi l l be made on a per uni t basi s under Li ne I t em 0133. Payment i ncl udes l abor , mat er i al , equi pment , and t r anspor t at i on r equi r ed t o r ef ur bi sh t he gat e shaf t mechani sm and suppor t base, r epl acement gr eased bushi ngs at t he t op, conver si on t o gr easel ess bushi ngs at t he bot t om, i n accor dance wi t h t he speci f i cat i ons.

1. 4. 2. 15 I t em No. 0134 Fur ni sh Set of Wi cket Gat e Shear Pi ns ( I ncl udi ng Spares)

Payment f or Fur ni shi ng Set s of Wi cket Gat e Shear Pi ns wi l l be made on a per set basi s under Li ne I t em 0134. Payment i ncl udes l abor , mat er i al , equi pment , and t r anspor t at i on r equi r ed t o f ur ni sh one ( 1) set of wi cket gat e shear pi ns and one ( 1) spar e set i ncl udi ng suppl y, t est i ng, and i nst al l i n accor dance wi t h t he speci f i cat i ons.

1. 4. 2. 16 I t em No. 0135 Desi gn and Pr ovi de Gener at or Ai r Cool er s

Payment t o f ur ni sh one ( 1) set of t wo ( 2) gener at or ai r cool er s wi l l be made on a j ob basi s under I t em No. 0135. Payment i ncl udes l abor , mat er i al , and equi pment r equi r ed t o pr ovi de one ( 1) set of spar e gener at or ai r cool er s i n accor dance wi t h t he speci f i cat i ons and del i ver y t o t he pr oj ect .

1. 4. 2. 17 I t em No. 0136 Spar e Gener at or Ai r Cool er s

Payment f or Spar e Gener at or Ai r Cool er s wi l l be made on a per set basi s under Li ne I t em 0136. Payment i ncl udes l abor , mat er i al , l ong- t er m packagi ng, and equi pment r equi r ed t o pr ovi de one ( 1) set of spar e gener at or ai r cool er s i n accor dance wi t h t he speci f i cat i ons and del i ver y t o t he pr oj ect . Two ( 2) gener at or ai r cool er s equal s one ( 1) set .

1. 4. 2. 18 I t em No. 0137 Desi gn and Pr ovi de Thr ust Bear i ng Oi l Cool er s

Payment f or desi gni ng and pr ovi di ng of new set of t wo t hr ust bear i ng oi l cool er s wi l l be made on a j ob basi s under I t em No. 0137. Payment shal l i ncl ude l abor , mat er i al , and equi pment t o f ur ni sh new t hr ust bear i ng oi l cool er s i n accor dance wi t h t he speci f i cat i ons.

1. 4. 2. 19 I t em No. 0138 Dr af t Tube Vacuum Br eaker Pi pi ng Repl acement

Payment f or Dr af t Tube Vacuum Br eaker Pi pi ng Repl acement , i ncl udi ng r emoval of t he ol d pi pe and necessar y wel di ng wi l l be made on a j ob basi s under I t em No. 0138. Payment shal l i nc l ude l abor , mat er i al , and equi pment i n accor dance wi t h t he speci f i cat i ons.

1. 4. 2. 20 I t em No. 0139 Machi ni ng Wi t h Bor i ng Bar

Payment f or Machi ni ng wi t h a Bor i ng Bar wi l l be made on a j ob basi s under Li ne I t em 0139. Payment i ncl udes l abor , mat er i al , equi pment , and t r anspor t at i on r equi r ed t o pr ovi de a bor i ng bar t o machi ne t he st ay r i ng mount i ng f l anges i n accor dance wi t h t he speci f i cat i ons.

1. 4. 2. 21 I t em No. 0140 Set up f or Machi ni ng and Machi ni ng up t o 0. 020" of St ay Ri ng t o Bot t om Ri ng Mount i ng Fl ange

Measur ement f or Set up f or Machi ni ng and Machi ni ng up t o 0. 020" of St ay Ri ng Mount i ng Fl ange wi l l be made on a per uni t basi s under Li ne I t em 0140.

Payment i ncl udes l abor , mat er i al , and equi pment r equi r ed t o set up f or machi ni ng on a uni t , and compl et i ng machi ni ng up t o 0. 020 i nches of t he st ay r i ng mount i ng f l ange f or bot t om r i ng i n accor dance wi t h t he specifications.

1. 4. 2. 22 I t em No. 0141 Set up f or Machi ni ng and Machi ni ng up t o 0. 020" of St ay Ri ng t o Head Cover Mount i ng Fl anges

Measur ement f or Set up f or Machi ni ng and Machi ni ng up t o 0. 020" of St ay Ri ng t o Head Cover Mount i ng Fl ange wi l l be made on a per uni t basi s under Li ne I t em 0141. Payment i ncl udes l abor , mat er i al , and equi pment r equi r ed t o set up f or machi ni ng on a uni t , and compl et i ng machi ni ng up t o 0. 020 i nches of t he st ay r i ng mount i ng f l ange f or headcover i n accor dance wi t h t he specifications.

1. 4. 2. 23 I t em No. 0142 Repl ace Runner Coupl i ng Fast ener s and Key

Payment f or Pr ovi s i on of Runner Coupl i ng Fast ener s and Keys wi l l be made on a j ob basi s under Li ne I t em 0142. Payment i ncl udes l abor , mat er i al , equi pment , and t r anspor t at i on r equi r ed t o pr ovi de Repl acement Runner Coupl i ng Fast ener s and Keys i n accor dance wi t h t he speci f i cat i ons.

1. 4. 2. 24 I t em No. 0143 Gener at or Ai r Br ake and Jacki ng Syst em Ref ur bi shment

Payment f or gener at or ai r br ake and j acki ng syst em r ef ur bi shment wi l l be made on a j ob basi s under I t em No. 0143. Payment shal l i ncl ude l abor , mat er i al , and equi pment r equi r ed f or br ake syst em r ef ur bi shment i nc l udi ng br ake/ j ack cyl i nder s, pads, pi pi ng, el ect r oni c cont r ol s, hydr aul i c pumps, mot or s, val ves, and any component s needed t o f unct i on as a syst em i n accor dance wi t h t he speci f i cat i ons.

1. 4. 2. 25 I t em No. 0144 I nspect Gener at or Br ake Ri ngs

Payment f or gener at or br ake r i ng i nspect i ons wi l l be made on a j ob basi s under I t em No. 0144. Payment shal l i ncl ude l abor , mat er i al , and equi pment r equi r ed t o per f or m t he i nspect i on of t he br ake r i ng i n accor dance wi t h t he specifications.

1. 4. 2. 26 I t em No. 0145 I nspect , Shi p Equal i zer Ri ng Assembl y

Payment f or i nspect i on and shi ppi ng of equal i zer r i ng assembl y wi l l be made on a j ob basi s under I t em No. 0145. Payment shal l i ncl ude l abor , mat er i al , and equi pment f or t he i nspect i on of t he Equal i zer Ri ng Assembl y i n accor dance wi t h t he speci f i cat i ons.

1. 4. 2. 27 I t em No. 0146 Pr ovi de New Tef l on Faced PTFE Thr ust Bear i ng Shoes, I ncl udi ng Spar es

Payment f or pr ovi di ng new t ef l on f aced PTEE t hr ust bear i ng shoes i ncl udi ng spar eswi l l be made on a j ob basi s under I t em No. 0146. Payment shal l i ncl ude l abor , mat er i al , and equi pment r equi r ed t o pr ovi de new t hr ust shoes i n accor dance wi t h t he speci f i cat i ons.

1. 4. 2. 28 I t em No. 0147 Shi pment and Ref ur bi shment of Thr ust Bear i ng Runner and Thr ust Col l ar I ncl udi ng Resur f ace Runni ng Faces, Resur f ace Mount i ng Faces, Fur ni sh new Bol t s/ Har dwar e. ( I ncl udi ng One Spar e)

Payment f or shi pment and r ef ur bi shment of t hr ust bear i ng r unner and t hr ust col l ar i ncl udi ng r esur f ace r unni ng f aces, r esur f ace mount i ng f aces, f ur ni sh new bol t s/ har dwar e i ncl udi ng one spar e wi l l be made on a j ob basi s under I t em No. 0147. Payment shal l i nc l ude l abor , mat er i al , and equi pment r equi r ed f or Shi pment and Ref ur bi shment of Thr ust Bear i ng Runner and Thr ust Col l ar I ncl udi ng Resur f ace Runni ng Faces, Resur f ace Mount i ng Faces, Fur ni sh New Bol t s/ Har dwar e i n accor dance wi t h t he speci f i cat i ons.

1. 4. 2. 29 I t em No. 0148 I nspect , Shi p, and Ref ur bi sh Upper Gener at or Gui de Bearing

Payment f or t he i nspect i on, shi ppi ng, and r ef ur bi shment of t he upper gener at or gui de bear i ng wi l l be made on a j ob basi s under I t em No. 0148.

Payment shal l i ncl ude l abor , mat er i al , and equi pment r ef ur bi sh t he upper gener at or gui de bear i ng i n accor dance wi t h t he speci f i cat i ons.

1. 4. 2. 30 I t em No. 0149 I nspect , Shi p, Ref ur bi sh Lower Gener at or Gui de Bearing

Payment f or t he i nspect i on, shi ppi ng, and r ef ur bi shment of t he l ower gener at or gui de bear i ng wi l l be made on a j ob basi s under I t em No. 0149.

Payment shal l i ncl ude l abor , mat er i al , and equi pment t o r ef ur bi sh t he gener at or l ower gui de bear i ng i n accor dance wi t h t he speci f i cat i ons.

1. 4. 2. 31 I t em No. 0150 I nspect , Shi p, Ref ur bi sh Tur bi ne Gui de Bear i ng

Payment f or t he i nspect i on, shi ppi ng, and r ef ur bi shment of t he t ur bi ne gui de bear i ng wi l l be made on a j ob basi s under I t em No. 0150. Payment shal l i ncl ude l abor , mat er i al , and equi pment t o r ef ur bi sh t he t ur bi ne gui de bear i ng i n accor dance wi t h t he speci f i cat i ons.

1. 4. 2. 32 I t em No. 0151 I nspect , Shi p, Ref ur bi sh Tur bi ne Gui de Bear i ng, Spar e Bear i ng

Payment f or t he i nspect i on, shi ppi ng, and r ef ur bi shement of t he t ur bi ne gui de bear i ng and f ur ni shi ng spar e bear i ng wi l l be made on a j ob basi s under I t em No. 0151. Payment shal l i ncl ude l abor , mat er i al , and equi pment t o i nspect , shi p, and r ef ur bi sh t ur bi ne gui de bear i ng, spar e bear i ng i n accor dance wi t h t he speci f i cat i ons.

1. 4. 2. 33 I t em No. 0152 I nspect , Spar e Upper Gener at or Gui de Bear i ng

Payment f or t he i nspect i on of t he spar e upper gener at or gui de bear i ng wi l l be made on a j ob basi s under I t em No. 0152. Ther e i s onl y one set of spar e upper gener at or gui de bear i ng. Payment shal l i ncl ude l abor , mat er i al , and equi pment f or t he i nspect i on of t he spar e upper gener at or gui de bear i ng i n accor dance wi t h t he speci f i cat i ons.

1. 4. 2. 34 I t em No. 0153 I nspect Spar e Lower Gener at or Gui de Bear i ng

Payment f or t he i nspect i on of t he spar e l ower gener at or gui de bear i ng wi l l be made on a j ob basi s under I t em No. 0153. Ther e i s onl y one set of spar e l ower gener at or gui de bear i ng. Payment shal l i ncl ude l abor , mat er i al , and equi pment f or t he i nspect i on of t he spar e l ower gener at or gui de bear i ng i n accor dance wi t h t he speci f i cat i ons.

1. 4. 2. 35 I t em No. 0154 Repl ace Tur bi ne Pi t Pi pi ng and Accessor i es

Payment f or t he r epl acement of t he t ur bi ne pi t pi pi ng and accessor i es wi l l be made on a j ob basi s under I t em No. 0154. Payment shal l i ncl ude l abor , mat er i al , and equi pment t o r epl ace t he cool er , t he wat er pi pi ng f or t he t ur bi ne gui de bear i ng cool er , and pi pi ng t o packi ng box i n accor dance wi t h t he speci f i cat i ons.

1. 4. 2. 36 I t em No. 0155 Repl ace Mai n Cool i ng Wat er Pi pi ng and Val ves

Payment f or r epl aci ng t he mai n cool i ng wat er pi pi ng and val ves f or uni t 1 wi l l be made on a j ob basi s under I t em No. 0155. Payment shal l i nc l ude l abor , mat er i al , and equi pment t o r epl ace t he mai n cool i ng wat er pi pi ng and val ves associ at ed i n wi t h t he speci f i cat i ons.

1. 4. 2. 37 I t em No. 0156 - 0169 Reser ved

1. 4. 3 ELECTRI CAL WORK UNI T 1 - GENERATOR

1. 4. 3. 1 I t em No. 0170 Desi gn, Manuf act ur e, and Per f or m Vol t age Endur ance Test i ng on 4 Pr ot ot ype Coi l s

Payment f or t he desi gn, manuf act ur i ng and per f or mi ng vol t age endur ance t est wi l l be made on a j ob basi s under I t em No. 0170. Payment shal l i ncl ude al l l abor , mat er i al s and equi pment r equi r ed f or desi gni ng, manuf act ur i ng, and per f or mi ng vol t age endur ance t est i ng on 4 pr ot ot ype coi l s i n accor dance wi t h t he speci f i cat i ons.

1. 4. 3. 2 I t em No. 0171 Fur ni sh Compl et e Set of St at or Coi l s I ncl udi ng Suppl i es and Accessor i es f or a Compl et e new Wi ndi ng I ncl udi ng Fact or y Test i ng

Payment f or f ur ni shi ng a compl et e set of st at or coi l s wi l l be made on a j ob basi s under I t em No. 0171. Payment shal l i ncl ude al l l abor , mat er i al s and equi pment r equi r ed f or f ur ni shi ng Compl et e Set Of St at or Coi l s I ncl udi ng

Suppl i es and Accessor i es For A Compl et e New Wi ndi ng I ncl udi ng Fact or y Test i ng i n accor dance wi t h t he speci f i cat i ons.

1. 4. 3. 3 I t em No. 0172 Fur ni sh Gener at or Spar e Par t s

Payment f or t he f ur ni shi ng of spar e par t s wi l l be made on a j ob basi s under I t em No. 0172. Payment shal l i ncl ude al l l abor , mat er i al s and equi pment r equi r ed f or pr ovi s i on of spar e gener at or par t s i n accor dance wi t h t he specifications.

1. 4. 3. 4 I t em No. 0173 Removi ng Abandoned Rot at i ng Exci t er Par t s

Payment f or t he r emoval of abandoned r ot at i ng exci t er par t s wi l l be made on a j ob basi s under I t em No. 0173. Payment shal l i nc l ude al l l abor , mat er i al s and equi pment r equi r ed f or t he r emoval of t he abandoned r ot at i ng exci t er par t s i n accor dance wi t h t he speci f i cat i ons.

1. 4. 3. 5 I t em No. 0174 Fur ni sh and I nst al l New St at or Cor e

Payment f or f ur ni shi ng and i nst al l i ng new st at or cor e wi l l be made on a j ob basi s under I t em No. 0174. Payment shal l i ncl ude al l l abor , mat er i al s and equi pment r equi r ed f or t he f ur ni shi ng and i nst al l at i on of a new st at or cor e i n accor dance wi t h t he speci f i cat i ons.

1. 4. 3. 6 I t em No. 0175 I nst al l and Test New St at or Wi ndi ng

Payment f or i nst al l i ng and t est i ng new st at or wi ndi ng wi l l be made on a j ob basi s under I t em No. 0175. Payment shal l i ncl ude al l l abor , mat er i al s and equi pment r equi r ed f or t he i nst al l at i on and t est i ng of t he new st at or wi ndi ngs i n accor dance wi t h t he speci f i cat i ons.

1.