W912DS22R0001_Amendment 0002.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to:

1. Issue updated Wage Rates.

2. Post the Sign-In sheet from the 24 Feb 2022 Site Visit.

3. Revise and reissue draw ings and specif ications.

4. Provide responses to bidder inquires for informational purposes only.

5. Extend Offer Due Date to 29 March 2022 at 2:00 PM EDT and to extend the Bidder Inquiry Due Date to 7 March 2022 at 11:59 AM EST.

Offeror must acknow ledge receipt of this amendment by the date specified in the proposal (or as amended) by one of the follow ing methods: in the space provided on SF1442, by separate letter, or by signing block 15 below . FAILURE TO ACKNOWLEDGE AMENDMENTS BY THE DATE AND TIME SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER IN ACCORDANCE WITH THE SUBMISSION, MODIFICATION, REVISION, AND WITHDRAWAL OF PROPOSALS (FAR 15.208).

1. CONTRACT ID CODE PAGE OF PAGES

J 1 23

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X W912DS22R0001

X 9B. DATED (SEE ITEM 11)

28-Jan-2022

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

U0002

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

01-Mar-2022

CODE

US ARMY CORPS OF ENGINEERS, NEW YORK

26 FEDERAL PLAZA, RM 16-300

NEW YORK NY 10278-0090

W912DS 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W912DS22R0001

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION 00 10 00 - SOLICITATION

The required response date/time has changed from 15-Mar-2022 02:00 PM to 29-Mar-2022 02:00 PM.

The following have been modified:

OFFEROR INQUIRIES

BIDDER INQUIRIES: Submission of inquiries will open on 28 January 2022. Please submit technical inquiries and questions relating to this solicitation via Bidder Inquiry in ProjNet at https://www.projnet.org. Submission of inquires will close 7 March 2022 at 11:59 AM EST. The Government reserves the right to decline addressing questions received after this date. If an Offeror believes that the requirements in this solicitation contains an error, omission, or are otherwise unsound; immediately notify the Contract Specialist in writing with supporting rationale.

The Government reserves the right to award this contract based on the initial proposal, as received, without discussions. To submit and review inquiry items, prospective vendors will need to use the Bidder Inquiry Key presented below and follow the instructions listed below the key for access. A prospective vendor who submits a comment or question will receive an acknowledgement via e-mail, followed by an answer after it has been processed by our technical team. All timely questions and approved answers will be made available through ProjNet.

Approved answers to all timely questions will also be posted on www.sam.gov in the form of a report generated from ProjNet as soon as the comment/question entering period is over and answers are all finalized.

Bidder Inquiry Key: 5R9RU5-U44UDQ Specific Instructions for Initial ProjNet Bid Inquiry Access:

1. From the ProjNet home page, click on Quick Add on the upper right side of the screen.

2. Identify the Agency as USACE.

3. Key. Enter the Bidder Inquiry Key listed above.

4. E-mail. Enter the e-mail address you would like to use for communication.

5. Click Continue. A page will then open saying that a user account was not found and will ask you to create one using the provided form.

6. Enter your First Name, Last Name, Company, City, State, Phone, E-mail, Secret Question, Secret Answer, and Time Zone. Remember your Secret Question and Answer as they will be used from this point on to access the ProjNet system.

7. Click Add User. Once this is completed you are now registered within ProjNet and are currently logged into the system.

Specific Instructions for Future ProjNet Bid Inquiry Access:

Steps 1 through 3: same as above.

4. E-mail. Enter the e-mail address you used to register previously in ProjNet.

5. Click Continue. A page will then open asking for the answer to your Secret Question.

6. Enter your Secret Answer and click Login. Once this is completed, you are logged into the system.

SECTION 00 72 00 - GENERAL CONDITIONS

The following have been added by full text:

AMENDMENT 0002

TO OFFERORS:

The purpose of this amendment is to extend the Offer Due Date to 29 March 2022 at 2:00 PM EDT, to extend the Bidder Inquiry Due Date to 7 March 2022 at 11:59 AM EST, to respond to bidder inquiries, to publish the Sign-In Sheet from the Site Visit, provide updated Wage Rates, and to make the following changes to the solicitation.

DRAWINGS:

1. The following DRAWINGS have been REVISED and REISSUED:

G-003 A-604

2. The following DRAWINGS have been ADDED:

M-820

3. The following DRAWINGS have been DELETED: None

4. The following DRAWINGS have been REVISED but NOT REISSUED: None.

SPECIFICATIONS:

1. The following SPECIFICATION SECTIONS have been ADDED and are provided in their entirety herein: None.

2. The following SPECIFICATIONS SECTIONS have been DELETED in their entirety:

SECTION 00 00 01

SECTION 00 00 02

3. The following SPECIFICATION SECTIONS have been REVISED and REISSUED:

None.

4. The following SPECIFICATION SECTIONS have been REVISED but NOT REISSUED:

None.

QUESTIONS AND GOVERNMENT REPLY:

(Questions that may be of general interest to all Offerors and/or the Government and that are not readily answered by the proceeding changes will appear below. These questions may have been paraphrased or altered to represent several questions regarding the same subject and/or simply revised to clarify and simplify the question(s). Questions and answers are issued to the offerors “For Information Only” and do not revise the solicitation, plans or specifications.)

BIDDER INQUIRY 1: Drawing M-820 is missing. In addition, Equipment Schedule drawings M-601 to M-604 do not contain any information of basis of design's manufacturer and model.

will you please provide the missing drawing and information?

GOVERNMENT RESPONSE 1: Without an approved justification, the Federal Acquisition Regulation prohibits the use of brand name or equal (bases of design) references in solicitations.

Please refer to drawings M-601 to M-604 and specifications Division 23 for salient characteristics of subject equipment. Sheet M-820 is provided in this amendment.

BIDDER INQUIRY 2: Door #’s 102A, 102B, 103, 104, 105A, 105B, 106, 107, 108, 110, 111A, 111B, 112A, 112B, 122, 123 are wood doors with aluminum frames according to the door schedule. Details for these doors indicated on the door schedule appear to show open back hollow metal door frames that wrap the wall the doors are being installed into. We believe that the previously mentioned door #’s should be wood doors with hollow metal frames. Please confirm.

GOVERNMENT RESPONSE 2: All door frames previously marked as aluminum have been changed to hollow metal to reflect details and manufacturer recommendations. Refer to updated sheet A-604.

BIDDER INQUIRY 3: Door #’s 113, 114, 117AA, 117C, 119, 120, 121B are hollow metal doors with aluminum door frames according to the door schedule. Aluminum door frame manufacturer does not recommend installing hollow metal doors into aluminum frames. We believe that the previously mentioned door #’s should have hollow metal frames. Please confirm.

GOVERNMENT RESPONSE 3: All door frames previously marked as aluminum have been changed to hollow metal to reflect details and manufacturer recommendations. Refer to updated sheet A-604.

BIDDER INQUIRY 4: Door #’s 113 & 117C are hollow metal doors with aluminum frames & 1 hour fire rating according to the door schedule. If these doors are to have aluminum frames & be fire rated, then the door must also be aluminum. Fire rated aluminum frame/door manufacturer will not allow/warrant/approve a fire rated entrance with an aluminum frame & hollow metal door. Details for these doors appears to show hollow metal frame. We believe that these openings should be hollow metal doors & frames with 1 hour fire rating. Please confirm.

GOVERNMENT RESPONSE 4: All door frames previously marked as aluminum have been changed to hollow metal to reflect details and manufacturer recommendations. Refer to updated sheet A-604.

BIDDER INQUIRY 5: Door types j & k appear on the door schedule, but no elevation of these door types was provided. Please provide.

GOVERNMENT RESPONSE 5: All doors previously listed as type J have been revised to type C and all doors previously marked as type K have been revised to type E. Refer to updated sheet A-604.

BIDDER INQUIRY 6: Does door #101B have a transom? According to the door schedule it does not but I ask because the door schedule also indicates that door #101A, which is the other door of this vestibule, does not have a transom but it does have a transom according to building elevations. Please clarify if a transom is required at interior door of vestibule 101, door #101B.

GOVERNMENT RESPONSE 6: Frame type Schedule in A-604 has been revised to include type 4 with a transom and type 4 has been listed to doors 101A and 101B.

BIDDER INQUIRY 7: Door #101A is 6’-8” wide according to the door schedule. Door elevation of type A door below door schedule, floor plan & building elevation of this door show 6’-0” width. Please clarify width of door #101A.

GOVERNMENT RESPONSE 7: Door type 101A has been revised to 6’-0” to reflect plans and elevations. Refer to updated sheet A-604.

BIDDER INQUIRY 8: Door #’s 125A & 125B are 3’-0” wide according to the door schedule, floor plan & building elevation. Door elevations of type B door below door schedule say that width of this door type is 3’-6”. Please clarify width of door #’s 125A & 125B.

GOVERNMENT RESPONSE 8: Door type 2 and frame type schedule have been revised to show that Doors 125A and 125B are 3’0”. Refer to updated sheet A-604.

BIDDER INQUIRY 9: Regarding the Mechanical Electrical and Plumbing schedule, please provide makes and models to be used for all plumbing fixtures and mechanical equipment.

GOVERNMENT RESPONSE 9: Without an approved justification, the Federal Acquisition Regulation prohibits the use of brand name or equal (bases of design) references in solicitations.

Please refer to equipment schedules within the drawings as well as specifications Divisions 22 and 23 for salient characteristics of subject equipment.

BIDDER INQUIRY 10: Drawing C-503 references a detail A4 on C-510 for the latch and wheel.

This drawing was not included in the set. Please provide

GOVERNMENT RESPONSE 10: The correct reference is A4/C-503. There is not a sheet C- 510.

BIDDER INQUIRY 11: Drawing C-502 shows a straight picket detail (D4) and a curved picket detail (D6). Please advise which detail is applicable as the site Plan does not specify. If both details are applicable, then please clarify the locations to which each apply.

GOVERNMENT RESPONSE 11: The straight picket detail applies.

BIDDER INQUIRY 12: Please allow for a one week RFI extension until March 7th and a two week bid extension until March 29th. Our subcontractors have asked for an extension due to certain questions that needs answers before they can begin to get pricing and put together quotes.

GOVERNMENT RESPONSE 12: This Amendment provides the requested extension.

WAGE RATES - 0002

"General Decision Number: NY20220003 02/25/2022

Superseded General Decision Number: NY20210003

State: New York MY 02/25/2022

Construction Types: Building, Heavy, Highway and Residential

Counties: Bronx, Kings, New York, Queens and Richmond Counties in New York.

BUILDING & RESIDENTIAL CONSTRUCTION PROJECTS (includes single family homes and apartments up to and including 4 stories), HEAVY AND HIGHWAY CONSTRUCTION PROJECTS

Note: Contracts subject to the Davis-Bacon Act are generally required to pay at least the applicable minimum wage rate required under Executive Order 14026 or Executive Order 13658.

Please note that these Executive Orders apply to covered contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but do not apply to contracts subject only to the Davis-Bacon Related Acts, including those set forth at 29 CFR 5.1(a)(2)-(60).

|If the contract is entered |. Executive Order 14026 | |into on or after January 30, | generally applies to the | |2022, or the contract is | contract. | |renewed or extended (e.g., an |. The contractor must pay | |option is exercised) on or | all covered workers at | |after January 30, 2022: | least $15.00 per hour (or | | | the applicable wage rate | | | listed on this wage | | | determination, if it is | | | higher) for all hours | | | spent performing on the | | | contract in 2022. | |If the contract was awarded on|. Executive Order 13658 | |or between January 1, 2015 and| generally applies to the | |January 29, 2022, and the | contract. | |contract is not renewed or |. The contractor must pay all| |extended on or after January | covered workers at least | |30, 2022: | $11.25 per hour (or the | | | applicable wage rate listed| | | on this wage determination,| | | if it is higher) for all | | | hours spent performing on | | | that contract in 2022. |

The applicable Executive Order minimum wage rate will be adjusted annually. If this contract is covered by one of the Executive Orders and a classification considered necessary for performance of work on the contract does not appear on this wage determination, the contractor must still submit a conformance request.

Additional information on contractor requirements and worker protections under the Executive Orders is available at https://www.dol.gov/agencies/whd/government-contracts.

Modification Number Publication Date 0 01/07/2022 1 02/25/2022

ASBE0012-001 06/01/2021

Rates Fringes

Asbestos Workers/Insulator Includes application of all insulating materials, protective coverings, coatings and finishes to all types of mechanical systems.....................$ 69.01 35.16

HAZARDOUS MATERIAL HANDLER.......$ 39.00 12.75

BOIL0005-001 01/01/2021

Rates Fringes

BOILERMAKER......................$ 63.38 33%+47.22+a

FOOTNOTE:

a. PAID HOLIDAYS: New Year's Day, Thanksgiving Day, Memorial Day, Independence Day, Labor Day and Good Friday, Friday after Thanksgiving, Christmas Eve Day and New Year's Eve

BRNY0001-001 07/01/2020

Rates Fringes

BRICKLAYER.......................$ 62.54 29.40

MASON - STONE....................$ 67.88 36.91

BRNY0001-002 07/01/2020

Rates Fringes

Pointer, cleaner and caulker.....$ 55.97 29.64

BRNY0004-001 07/05/2021

Rates Fringes

MARBLE MASON.....................$ 61.73 37.91

BRNY0007-001 07/01/2021

Rates Fringes

TERRAZZO FINISHER................$ 55.21 36.97

TERRAZZO WORKER/SETTER...........$ 58.46 38.09

* BRNY0007-002 12/06/2021

Rates Fringes

TILE FINISHER....................$ 47.56 32.71

BRNY0020-001 01/04/2021

Rates Fringes

MARBLE FINISHER..................$ 48.27 35.40

BRNY0024-001 01/01/2021

Rates Fringes

BRICKLAYER

MARBLE POLISHERS............$ 45.37 28.80

* BRNY0052-001 12/06/2021

Rates Fringes

Tile Layer.......................$ 61.84 36.04

CARP0001-003 07/01/2021

Rates Fringes

CARPENTER (HEAVY & HIGHWAY)......$ 56.93 52.79

CARP0001-009 07/01/2021

Rates Fringes

CARPENTER (BUILDING &

RESIDENTIAL)

Carpenters..................$ 54.75 46.43 Soft Floor Layers...........$ 54.75 46.43

CARP0740-001 07/01/2021

Rates Fringes

MILLWRIGHT.......................$ 57.00 54.06

CARP1556-006 07/01/2021

Rates Fringes

Dock Builder & Piledrivermen.....$ 56.93 52.79

CARP1556-007 07/01/2021

Rates Fringes

Diver Tender.....................$ 51.34 52.79 Diver............................$ 71.80 52.79

CARP1556-011 07/01/2021

Rates Fringes

Carpenters:

TIMBERMEN...................$ 52.05 52.24

ELEC0003-001 04/11/2019

ELECTRICIAN

Electricians................$ 56.00 76.725%+16.25 Jobbing, and maintenance and repair work.............$ 28.50 51.243%+7.50+a

PAID HOLIDAYS:

a. New Years Day, Martin Luther King, Jr.'s Birthday, Washington's Birthday, Memorial Day, Independence Day, Labor Day, Columbus Day, Election Day, Thanksgiving Day, the day after Thanksgiving Day, and Christmas Day

ELEC1049-001 04/04/2021

QUEENS COUNTY

Rates Fringes

Line Construction (Substation and Switching structures pipe type cable installation and maintenance jobs or projects;

Railroad electrical distribution/transmission systems maintenance (when work is not performed by railroad employees) Overhead and Underground transmission/distribution line work. Fiber optic, telephone cable and equipment) Groundman...................$ 36.73 25.66 Heavy Equipment Operator....$ 48.97 29.55 Lineman and Cable Splicer...$ 61.21 33.43 Tree Trimmer................$ 30.09 14.12

ELEV0001-002 03/17/2021

Rates Fringes

ELEVATOR MECHANIC

Elevator Constructor........$ 72.29 42.912+a+b Modernization and Repair....$ 50.49 40.399+a+b

FOOTNOTE:

a. PAID HOLIDAYS: New Year's Day, Good Friday, President's Day, Memorial Day, Independence Day, Labor Day, Columbus Day, Veteran's Day, Thanksgiving Day, Friday after Thanksgiving, and Christmas Day.

b. PAID VACATION: An employee who has worked less than 5 years shall recieve vacation pay credit on the basis of 4% of his hourly rate for all hours worked; an employee who has worked 5 to 15 years shall receive vacation pay credit on the basis of 6% of his hourly rate for all hours worked;

an employee who has worked 15 or more years shall receive vacation pay credit on the basis of 8% of his hourly rate for all hours worked.

ENGI0014-001 07/01/2021

Rates Fringes

POWER EQUIPMENT OPERATOR

(HEAVY & HIGHWAY)

GROUP 1....................$ 107.75 34.60

GROUP 2....................$ 89.05 34.60

GROUP 3....................$ 91.89 34.60

GROUP 4....................$ 89.70 34.60

GROUP 5....................$ 87.94 34.60

GROUP 6....................$ 84.48 34.60

GROUP 7....................$ 86.05 34.60

GROUP 8....................$ 83.59 34.60

GROUP 9....................$ 81.85 34.60

GROUP 10....................$ 78.28 34.60

GROUP 11....................$ 73.21 34.60

GROUP 12....................$ 74.81 34.60

GROUP 13....................$ 75.36 34.60

GROUP 14....................$ 57.06 34.60

GROUP 15....................$ 53.11 34.60

POWER EQUIPMENT OPERATOR

(PAVEMENT-HEAVY & HIGHWAY)

Asphalt Plants..............$ 69.04 34.60 Asphalt roller..............$ 81.47 34.60 Asphalt spreader............$ 83.59 34.60

POWER EQUIPMENT OPERATOR

(STEEL ERECTION)

Compressors, Welding Machines....................$ 53.07 34.60 Cranes, Hydraulic Cranes, 2 drum derricks, Forklifts, Boom Trucks......$ 88.77 34.60 Three drum derricks.........$ 92.36 34.60

POWER EQUIPMENT OPERATOR

(UTILITY)

Horizontal Boring Rig.......$ 79.56 34.60 Off shift compressors.......$ 66.26 34.60 Utility Compressors.........$ 52.77 34.60

POWER EQUIPMENT OPERATOR CLASSIFICATIONS

GROUP 1: Tower crane

GROUP 2: Rubber Tire Backhoes over 37,000 lbs, Track

Backhoes, power shovel, Hydraulic clam shells, moles and machines of a similar type

GROUP 3: Mine hoists and crane, etc. used as mine hoists

GROUP 4: Gradalls, keystones, cranes (with digging buckets), bridge cranes, trenching machines, vermeer cutter and machines of a similar nature

GROUP 5: Piledrivers, derrick boats, tunnel shovels

GROUP 6: All drills, and machines of a similar nature

GROUP 7: Back filling machines, cranes, mucking machines, dual drum pavers

GROUP 8: Mixers (concrete w/loading attachments), concrete pavers, cableways, land derricks, power house (low pressure units), concrete pumps

GROUP 9: Concrete plants, well drilling machines, stone crushers double drum hoist, power house (other than above)

GROUP 10: Concrete mixers

GROUP 11: Elevators

GROUP 12: Concrete breaking machine, Hoists (single drum), load masters, locomotive and dinkies over 10 tons

GROUP 13: Vibratory console

GROUP 14: Compressors (portable 3 or more in battery), tugger machine (caissons), well point pumps, chum drill

GROUP 15: Boilers, (high pressure, compressors (portable, single, or 2 in battery, not over 100' apart), pumps (river cofferdam and welding machines (except where arc is operated by members of local 15) push button machines, all engines irrespective of power (power pac) used to drive auxilliary equipment, air, hydraulic etc.

PREMIUMS ON CRANES (Crawler or Truck):

100' to 149' boom - add .50 150' to 249' boom - add .75 250' to 349' boom - add 1.00 350' to 450' boom - add 1.50

Premiums for Cranes on Steel Erection:

100' to 149' boom - add 1.75 150' to 249' boom - add 2.00 250' to 349' boom - add 2.25 350' to 450' boom - add 2.75 Tower crane - add 2.00

FOOTNOTE:

a. Paid Holidays: New Year's Day; Lincoln's Birthday;

Washington's Birthday; Memorial Day; Independence Day;

Labor Day; Veterans Day; Columbus Day; Election Day;

Thanksgiving Day; and Christmas Day; provided the employee works one day the payroll week in which the holiday occurs.

ENGI0014-002 07/01/2021

Rates Fringes

Power Equipment Operator

BUILDING & RESIDENTIAL

GROUP 1....................$ 84.16 34.60

GROUP 2....................$ 89.10 34.60

GROUP 3....................$ 77.98 34.60

GROUP 4....................$ 70.94 34.60

GROUP 5....................$ 53.12 34.60

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1: Double drum

GROUP 2: Stone derrick, cranes, hydraulic cranes, boom trucks

GROUP 3: 4 pole Hoist, Single Drum Hoists

GROUP 4: Fork lift, house cars, plaster (platform machine), plaster bucket, concrete pump and all other equipment used for hoisting material

GROUP 5: Compressors, welding machines (cutting concrete work), paint spraying, sand blasting, pumps (with the exclusion of concrete pumps), house car (settlement basis only), all engines irrespective of power (power pac) used to drive auxiliary equipment, air, hydraulic, etc., boilers

Premiums for Cranes:

100'-149' boom - add 1.75 150'-249' boom - add 2.00 250'-349' boom - add 2.25 350'-450' boom - add 2.75 Tower cranes add 2.00

FOOTNOTE:

a. PAID HOLIDAYS: New Year's Day, Lincoln's Birthday, Memorial Day, Independence Day, Labor Day, Veteran's Day, Columbus Day, Election Day, Thanksgiving Day, and Christmas Day, provided the employee works one day in the payroll week in which the holiday occurs

ENGI0015-001 07/01/2021

POWER EQUIPMENT OPERATOR

HEAVY AND HIGHWAY

GROUP 1....................$ 74.65 38.00

GROUP 2....................$ 72.40 38.00

GROUP 3....................$ 68.62 38.00

GROUP 4....................$ 64.82 38.00

GROUP 5....................$ 44.45 38.00

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1: Cherrypickers 20 tons and over and loaders (rubber-tired and/or tractor type with a manfufacturer's rated capacity of six cubic yards and over

GROUP 2: Rubber Tire Backhoes up to and including 37,000 lbs, Basin Machines, Groover, Mechanical Sweepers, Bobcat, Boom Truck, Barrier Transport (Barrier Mover) and machines of a similar nature, Boat Captains, Boat Operators, operation of Churn Drills and machines of a similar nature, Stetco Silent Hoist and machines of a similar nature, Vac-alls, Meyers Machines, John Beam and machines of a similar nature, Ross Carriers and Travel Lifts and machines of a similar nature, Bulldozers, Scrapers, and Turn-a Pulls, Tugger Hoist (used exclusively for handling excavated material), Tractors with attachments, Hyster and Roustabout Cranes, Cherrypickers, Austin Western, Grove and machines of a similar nature, Scoopmobiles, Monorails, Conveyors, Trenchers, Loaders- Rubber-tired and Tractor, Barber Greene, Eimco Loaders and Eimco Backhoes, Mighty Midget and similar breakers and tampers, Curb and Gutter Pavers and Motor Patrol, Motor Graders and all machines of a similar nature, Locomotives ten (10) tons or under, Mini-Max, Break-Tech and machines of a similar nature, Milling Machines, robotic and demolition machines and machines of a similar nature including Bobcat, Pile Rig Rubber-tired Excavator (37,000 lbs. and under), 2 man auger GROUP 3: Minor Equipment such as Tractors, Post Hole Diggers and Drivers, Ditch Witch (Walk Behind), Road Finishing Machines, Rollers (five (5) tons and under), Tugger Hoists, Dual Purpose Trucks, Fork Lifts and Dempsey Dumpsters

GROUP 4: Oilers for the following equipment: (all gasoline, electric, diesel, or air operated) gradalls and concrete pumps or similarly equipment manned by two-men

GROUP 5: Oilers for the following equipment: (all gasoline, electric, diesel, or air operated) shovels, cranes (draglines), backhoes, pavers, trenching machines, gunite machines, compressors (3 or more in battery)

Premiums for Cranes:

100'-149' boom - add 1.75

150'-249' boom - add 2.00 250'-349' boom - add 2.25 350'-450' boom - add 2.75 Tower cranes add 2.00

FOOTNOTE:

a. PAID HOLIDAYS: New Year's Day, Lincoln's Birthday, Memorial Day, Independence Day, Labor Day, Veteran's Day, Columbus Day, Election Day, Thanksgiving Day, and Christmas Day, provided the employee works one day in the payroll week in which the holiday occurs

ENGI0015-002 07/01/2016

Rates Fringes

POWER EQUIPMENT OPERATOR

BUILDING

GROUP 1....................$ 65.94 32.95

GROUP 2....................$ 63.98 32.95

GROUP 3....................$ 57.42 32.95

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1: Oiler GROUP 2: Oilers on Crawler Cranes, Backhoes, Trenching machines, Gunite machines, Compressors (3 or more in Battery) GROUP 3: Gradalls: Concrete Pumps, Power Houses - All equipment in same is manned by two (2) men only, Driving Truck Cranes

FOOTNOTE:

a. PAID HOLIDAYS: New Year's Day, Lincoln's Birthday, Memorial Day, Independence Day, Labor Day, Veteran's Day, Columbus Day, Election Day, Thanksgiving Day, and Christmas Day, provided the employee works one day in the payroll week in which the holiday occurs

IRON0040-002 07/01/2021

BRONX, NEW YORK, RICHMOND

Rates Fringes

IRONWORKER, STRUCTURAL...........$ 54.20 82.24

IRON0046-003 07/01/2021

Rates Fringes

IRONWORKER

METALLIC LATHERS AND

REINFORCING IRONWORKERS.....$ 56.90 26.30

IRON0197-001 07/01/2021

IRONWORKER

STONE DERRICKMAN............$ 55.63 55.10

IRON0361-002 07/01/2021

KINGS, QUEENS

Rates Fringes

Ironworkers:

(STRUCTURAL)................$ 54.20 82.24

IRON0580-001 07/01/2021

Rates Fringes

IRONWORKER, ORNAMENTAL...........$ 46.15 59.79

LABO0006-001 07/01/2016

Rates Fringes

LABORER (Cement and Concrete Workers).........................$ 42.48 17.35

LABO0029-001 07/01/2017

Rates Fringes

Laborers:

Heavy Blasters (hydraulic trac drill).....................$ 47.15 35.49 Blasters...................$ 46.27 35.49 Hydraulic Trac Drill.......$ 41.29 35.49 Jackhammers, Chippers, Spaders, Concrete Breakers, All Other Pneumatic Tools, Walk Behind Self-Propelled Hydraulic Asphalt and Concrete Breaker...........$ 39.34 35.49 Powder Carriers............$ 35.17 35.49

LABO0078-001 09/01/2021

Rates Fringes

LABORERS

BUILDING CONSTRUCTION

ASBESTOS (Removal, Abatement, Encapsulation or Decontamination of asbestos); LEAD; &

HAZARDOUS WASTE LABORERS

(Hazardous Waste, Hazardous Materials, Biochemical and Mold Remediation, HVAC, Duct Cleaning, Re-spray Fireproofing, etc).........$ 38.05 19.35

LABO0079-001 07/01/2018

Rates Fringes

LABORER (Building Construction) Demolition Laborers (Interior) Tier A.....................$ 37.44 23.60 Tier B.....................$ 26.63 17.57 Mason Tender/General Laborer.....................$ 40.65 28.85

CLASSIFICATIONS

TIER A: Responsible for the removal of all interior petitions and structural petitions that can consist of sheet rock, block or masonry. Also, all structural slab openings for ducts, mechanical, shafts, elevators, slab openings and exterior walls where the building is not being completely demolitioned.

TIER B: Responsible for shoveling of debris into containers, pushing containers from the inside to the outside of the building.

LABO0147-001 07/01/2016

Rates Fringes

LABORERS (FREE AIR & TUNNEL).....$ 72.67 47.72

Maintenance Men, Inside Muck Lock Tenders, Pump Men, Electricians, Cement Finishers, Caulkers, Hydraulic Men, Shield Men, Monorail Operators, Motor Men, Conveyor Men, Powder Carriers, Pan Men, Riggers, Chuck Tenders, Track Men Painters, Nippers, Brakemen, Cable Men, Hose Men, Grout Men, Gravel Men, Form Workers, Concrete Workers, Tunnel Laborers, Mole Nipper (one (1) Mole Sipper per Working Shaft per Shift for up to and including Two (2) Moles

LABO0731-001 07/01/2021

LABORER

Building, Heavy and Residential Construction LABORER: (Asbestos, Lead, Hazardous Waste Removal (including soil)/CEMENT/CONCRETE......$ 43.50 48.48

UTILITY LABORER............$ 43.35 48.48

Paid Holidays: Labor Day and Thanksgiving Day

LABO1010-001 07/01/2019

Rates Fringes

Laborers:

HIGHWAY CONSTRUCTION

Fence Installer & Repairer.$ 42.98 43.91

FORMSETTERS................$ 46.85 43.91

LABORERS...................$ 42.98 43.91

Landscape Planting & Maintenance................$ 42.98 43.91 Maintenance Safety Surface.$ 42.98 43.91 Slurry/Sealcoater/Play Equipment Installer........$ 42.98 43.91 Small Equipment Operator (Not Operating Engineer)...$ 42.98 43.91 Small Power Tools Operator.$ 42.98 43.91

FOOTNOTES:

a. PAID HOLIDAYS: Memorial Day, Fourth of July, Labor Day, Columbus Day, Election Day and Thanksgiving Day, provided the employee has worked one (1) day in the calendar week in which the said holiday occurs.

LABO1010-002 07/01/2019

Rates Fringes

Laborers-Asphalt Construction:

Micro Paver.................$ 47.45 43.91 Raker.......................$ 46.85 43.91 Screedperson................$ 47.45 43.91 Shoveler (Production Paving Only)................$ 42.98 43.91 Small Equipment Operator (Asphalt)...................$ 42.98 43.91

PAIN0009-001 05/01/2020

GLAZIER..........................$ 46.55 44.77

PAINTER

Painters, Drywall Finishers, Lead Abatement Worker......................$ 45.70 27.67 Spray, Scaffold and Sandblasting................$ 48.70 27.67

PAIN0806-001 10/01/2021

Rates Fringes

Painters:

Structural Steel and Bridge.$ 53.00 51.23

PAIN1974-001 06/28/2021

Rates Fringes

Painters:

Drywall Tapers/Pointers.....$ 48.47 29.06

PLAS0262-001 08/01/2019

Rates Fringes

PLASTERER........................$ 45.73 30.37

PLAS0262-002 08/01/2019

KINGS AND QUEENS COUNTIES

Rates Fringes

PLASTERER........................$ 45.73 30.37

PLAS0780-001 07/01/2018

Rates Fringes

CEMENT MASON/CONCRETE FINISHER...$ 51.97 33.56

* PLUM0001-001 01/01/2022

Rates Fringes

PLUMBER

MECHANICAL EQUIPMENT AND

SERVICE

Any repair and/or replacement of the present plumbing system that does not change the existing roughing..........$ 46.60 19.96

PLUMBERS:...................$ 71.25 39.95

PLUM0638-001 07/01/2020

Rates Fringes

PLUMBER

SERVICE FITTERS.............$ 41.75 14.00

SPRINKLER FITTERS,

STEAMFITTERS................$ 59.05 58.34

Service Fitter work shall consist of all repair, service and maintenance work on domestic, commercial and industrial refrigeration, air conditioning and air cooling, stoker and oil burner apparatus and heating apparatus etc., including but not exclusively the charging, evacuation, leak testing and assembling for all machines for domestic, commercial and industrial refrigeration, air conditioning and heating apparatus. Also, work shall include adjusting, including capacity adjustments, checking and repairing or replacement of all controls and start up of all machines and repairing all defects that may develop on any system for domestic, commercial and industrial refrigeration and all air conditioning, air cooling, stoker and oil burner apparatus and heating apparatus regardless of size or type.

ROOF0008-003 07/01/2021

Rates Fringes

ROOFER...........................$ 45.25 35.62

SHEE0028-002 07/29/2021

Rates Fringes

SHEET METAL WORKER

BUILDING CONSTRUCTION.......$ 51.35 53.51

RESIDENTIAL CONSTRUCTION....$ 23.84 8.40

TEAM0282-001 07/01/2020

Rates Fringes

TRUCK DRIVER

Asphalt.....................$ 42.68 46.9025+a Euclids & Turnapulls........$ 45.62 50.5625+a High Rise...................$ 53.79 49.2025+a

FOOTNOTES:

PAID HOLIDAYS: New Year's Day, Presidents' Day, Memorial Day, Independence Day, Labor Day, Columbus Day, Election Day, Veterans' Day (Armistice Day), Thanksgiving Day, Day after Thanksgiving and Christmas Day. Employees working two (2) days in the calendar week in which a holiday falls are to be paid for such holiday, provided that they shape each remaining workday during such calendar week.

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year.

Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is a victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at https://www.dol.gov/agencies/whd/government-contracts.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (ii)).

The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of ""identifiers"" that indicate whether the particular rate is a union rate (current union negotiated rate for local), a survey rate (weighted average rate) or a union average rate (weighted union average rate).

Union Rate Identifiers

A four letter classification abbreviation identifier enclosed in dotted lines beginning with characters other than ""SU"" or ""UAVG"" denotes that the union classification and rate were prevailing for that classification in the survey. Example:

PLUM0198-005 07/01/2014. PLUM is an abbreviation identifier of the union which prevailed in the survey for this classification, which in this example would be Plumbers. 0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. 07/01/2014 is the effective date of the most current negotiated rate, which in this example is July 1, 2014.

Union prevailing wage rates are updated to reflect all rate changes in the collective bargaining agreement (CBA) governing this classification and rate.

Survey Rate Identifiers

Classifications listed under the ""SU"" identifier indicate that no one rate prevailed for this classification in the survey and the published rate is derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As this weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SULA2012-007 5/13/2014. SU indicates the rates are survey rates based on a weighted average calculation of rates and are not majority rates. LA indicates the State of Louisiana. 2012 is the year of survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. 5/13/2014 indicates the survey completion date for the classifications and rates under that identifier.

Survey wage rates are not updated and remain in effect until a new survey is conducted.

Union Average Rate Identifiers

Classification(s) listed under the UAVG identifier indicate that no single majority rate prevailed for those classifications; however, 100% of the data reported for the classifications was union data. EXAMPLE: UAVG-OH-0010 08/29/2014. UAVG indicates that the rate is a weighted union average rate. OH indicates the state. The next number, 0010 in the example, is an internal number used in producing the wage determination. 08/29/2014 indicates the survey completion date for the classifications and rates under that identifier.

A UAVG rate will be updated once a year, usually in January of each year, to reflect a weighted average of the current negotiated/CBA rate of the union locals from which the rate is based.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour National Office because National Office has responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.) and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations. Write to:

Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:

Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISION"

(End of Summary of Changes)