W912DS22B0002000312-Jan2022.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendement is to:

1. Revise and reissue draw ings and revise specif ications.

2. Answ er RFI's. Last day to submit RFI is Jan 14th 2022.

3. Reissue w age rates

4. Add CLIN 0008 Bidder must acknow ledge receipt of this amendment by the date specified in the bid (or as amended) by one of the follow ing methods: in the space provided on SF1442, by separate letter, or by signing block 15 below . FAILURE TO ACKNOWLEDGE AMENDMENTS BY THE DATE AND TIME SPECIFIED MAY RESULT IN REJECTION OF YOUR BID IN ACCORDANCE WITH THE SUBMISSION, MODIFICATION, REVISION, AND

WITHDRAWAL OF BIDS (FAR 15.208).

1. CONTRACT ID CODE PAGE OF PAGES

J 1 27

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X W912DS22B0002

X 9B. DATED (SEE ITEM 11)

05-Nov-2021

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO.

5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

12-Jan-2022

CODE

US ARMY CORPS OF ENGINEERS, NEW YORK

26 FEDERAL PLAZA, RM 16-300

NEW YORK NY 10278-0090

W912DS 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W912DS22B0002

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION 00 10 00 - SOLICITATION

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Job

Construction of MSA at JBMDL NJ

FFP

Construction of MSA at JBMDL NJ: All work (includes all plant, labor, and material) for the construction of the 27 munition igloos and associated site work as described in the plans and specifications except for work included in items below FOB: Destination

PSC CD: Y1JZ

NET AMT

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0002 1 Job

Construction of MSA at JBMDL NJ

FFP

Construction of MSA at JBMDL NJ: All work (includes all plant, labor, and material) for construction for MX Admin Facility and Admin Bldgs as described in plans and specifications.

FOB: Destination

PSC CD: Y1JZ

NET AMT

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0003 1 Job

Construction of MSA at JBMDL NJ

FFP

Construction of MSA at JBMDL NJ: All work (includes all plant, labor, and material) for demolition of Bldg 1913, 1918 and 1939 as described in plans and specifications.

FOB: Destination

PSC CD: Y1JZ

NET AMT

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0004 1 Job

Construction of MSA at JBMDL NJ

FFP

Construction of MSA at JBMDL NJ: All work (includes all plant, labor, and material) for construction of remaining site work as well as fencing as described in the plans and specifications.

FOB: Destination

PSC CD: Y1JZ

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0005 1 Job

Construction of MSA at JBMDL NJ

FFP

Construction of MSA at JBMDL NJ All work for the Final Record Drawing Submission. This line item is pre-priced and cannot be changed.

FOB: Destination

PSC CD: Y1JZ

NET AMT

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0006 1 Job OPTION Option 1

FFP

Construction of MSA at JBMDL NJ All work associated with procurement delivery and installation of Furniture, Fixtures, & Equipment (FF&E) as listed on the drawings FOB: Destination

PSC CD: Y1JZ

$30,000.00

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0007 1 Job OPTION Option 2

FFP

Construction of MSA at JBMDL NJ All work associated with installation of extended lightening protection system.

FOB: Destination

PSC CD: Y1JZ

NET AMT

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0008 1 Job OPTION Option 3

FFP

Construction of MSA at JBMDL NJ All work associated with disposal of contaminated soil.

FOB: Destination

PSC CD: Y1JZ

NET AMT

The following have been modified:

TOTALS/NOTES

TOTAL BASE BID (SUM of CLINs 0001 through 0005)

TOTAL OPTIONAL ITEMS (SUM of CLINs 0006 through 0008)

TOTAL BASE BID PLUS OPTIONAL ITEMS (SUM OF CLINs 0001 through 0008)

NOTES:

1. Bidders are required to bid on all the Base Bid and all the Optional Bid Items or their bids will be rejected.

2. Bidders are reminded that they must bid on the issued plans and specifications as amended. Any deviations, conditions or attachments made by the bidder himself, thereto, may render the bid non-responsive and be cause for its rejection.

3. Line item 0005 is pre-priced at $30,000.00 and this price shown may not be changed. This price is set by the government as assurance to receive final drawings, it may not reflect the actual effort of developing final set. The Offerors are to include balance of actual effort in CLIN 0001, whether credit or additional cost.

4. The Basis of Evaluation will be the lowest responsive, responsible Offeror based on the Total Amount for the Base Bid Items plus any Optional Bid Items (Line Items 0001 thru 0008).

5. Option 1, 2 and/or 3: The Government may execute any option at any time before 300 calendar days from issuance of Notice to Proceed. Execution of any of these optional items will not extend construction duration.

6. The Bid Acceptance Period is as stated on Standard Form 1442.

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 720 dys. ANP 1 PPMD-MILITARY

STELLA MARCO

26 FEDERAL PLAZA ROOM 21-100

NEW YORK NY 10278

(917) 790-8224 FOB: Destination

W912DS

0002 720 dys. ANP 1 (SAME AS PREVIOUS LOCATION) FOB: Destination

W912DS

0003 720 dys. ANP 1 (SAME AS PREVIOUS LOCATION) FOB: Destination

W912DS

0004 720 dys. ANP 1 (SAME AS PREVIOUS LOCATION) FOB: Destination

W912DS

0005 720 dys. ANP 1 (SAME AS PREVIOUS LOCATION) FOB: Destination

W912DS

0006 720 dys. ANP 1 (SAME AS PREVIOUS LOCATION) FOB: Destination

W912DS

0007 720 dys. ANP 1 (SAME AS PREVIOUS LOCATION) FOB: Destination

W912DS

0008 720 dys. ANP 1 (SAME AS PREVIOUS LOCATION) FOB: Destination

W912DS

SECTION 00 72 00 - GENERAL CONDITIONS

The following items are applicable to this modification:

AMENDMENT 0003

Munition Storage Area Joint Base McGuire-Dix-Lakehurst, NJ

W912DS22B0002

Amendment 0003

AMENDMENT 0003 to DRAWINGS and SPECIFICATIONS for Munitions Storage Area, Joint Base McGuire-Dix-Lakehurst, New Jersey.

TO OFFORERS

The following changes shall be made to the drawings and specifications.

DRAWINGS

1. The following DRAWINGS have been REVISED but NOT REISSUED:

- None

2. The following DRAWINGS have been REVISED and REISSUED:

- G-002 – Index

- CS-101

- CU-102

3. The following DRAWINGS have been ADDED:

- C-502A – Civil Detail

4. The following DRAWINGS have been DELETED:

- None

SPECIFICATIONS

1. The following SPECIFICATION SECTIONS have been ADDED and are provided in their entirety herein:

- Section 12 21 00 – Window Blinds

- Section 32 31 13 – Fencing

- Section 32 31 14 – Cantilever Gate

- Appendix C – Geotech Report (For Reference Only)

2. The following SPECIFICATIONS SECTIONS have been DELETED in their entirety:

- None

3. The following SPECIFICATIONS SECTIONS have been REVISED and REISSUED:

- Section 28 10 05 – Electronic Security Systems – is hereby replaced in its entirety (has been issued in Amendment 0002)

4. The following SPECIFICATIONS have been REVISED but NOT REISSUED:

- Section 01 11 00 – correct the reference to the total of buildings to be demolished in paragraph 1.2.1 from “four” to “three”.

- Section 02 82 00 – remove reference to building 3446 from paragraph 1.3.1

- Section 02 82 00 (end of section) – Limited Asbestos Lead-Based paint and

Hazardous Materials Survey Report – please disregard information included in the Hazmat Report to any structure other than Bldg 1913, Bldg 1918, and Bldg 1939. (i.e.

disregard information pertaining to Bldg 3446).

BIDDER’S QUESTIONS AND GOVERNMENT REPLY

1. 1) Is it a requirement to use Tridium Niagara Framework (Niagara AX) or shall a BACnet-based solution be permitted? RESPONSE: Please refer to Section 23 09 23.02 for requirements.

2) Is Automated Logic as installed by Radius Systems an acceptable alternate for the Building Automation System scope of work? RESPONSE: Any substitutions for requirements will be evaluated at the time of the submittal review process

2. We were unable to locate Chain Link Security Fence Specifications as noted on Drawing C- 502 Details. Will this section be provided via an amendment? RESPONSE: Specification Section 32 31 13 Fencing has been added.

3. Please confirm the last date to submit RFI. RESPONSE: The date will be provided at a later time. The Gov will make it so that there are at least 10 calendar days before the final bid due date.

4. 1. Drawing CS-103 Note 1 calls for fence to be part of optional bid item. Also, Note I for fencing states optional bid item attached to primary bid documents. Note J states fence gate to be part of base bid. Please clarify. RESPONSE: Please refer to the revised drawings in Amendment 0002 for clarification.

2. Drawing CS-101 calls for Bid Option #2 for generator pad, but bid schedule does not show the same. Please advise. RESPONSE: Please refer to the revised drawings in Amendment 0002 for clarification.

5. Bid Item #003 lists only three (3) buildings (1913, 1918 & 1939) wheras spec 01 11 00 (Summary of Work) states demolition of four (4) buildings (2839 SM). Also, Spec 02 82 00 mentions four (4) buildings (1913, 1918, 1939 & 3446) to be abated. Please advise if bldg.

3446 is also to be demolished along with asbestos abatement? If so, please provide necessary drawing for bidding purposes. RESPONSE: The number of buildings to demolish is three, the spec sections are hereby revised to reflect the change. Any reference to Bldg 3446 should be disregarded.

6. 1. Sheet C-502/C1 Security fence detail - Note refers to specifications for fence materials, sizes, etc. Please provide specifications for fence to clarify which fence fabric and pipe to use. RESPONSE: Specifications section 32 31 13 is hereby issued in this amendment.

2. Sheet C-502/C1 - Is the top rail continuous or only at terminal brace connections?

RESPONSE: Refer to specifications section 32 31 13, the top rail displayed on the detail is only required on both sides of each gate, terminal connection, corner post and end post.

3. Sheet C-502/C1 - Please confirm concrete footing size on all posts to be 20" diameter?

RESPONSE: All concrete footings for fence posts in any location are 20” in diameter.

4. Sheet CS-103/Note #2 - Please provide Cantilever gate and operator specification and make and model detail. RESPONSE: Specifications section 32 31 14 and drawing C- 502A details are hereby issued in this amendment.

7. Please advise if the Government would enforce the ICC Technician Certification requirements as specified in Spec section 01 45 35. This would affect the price change for the soils/concrete technician. RESPONSE: Yes the certification is required.

8. We are unable to find any precast concrete suppliers that will do the precast work mentioned in the drawings - especially for the igloos. Will the government consider accepting cast in place igloo instead of precast? RESPONSE: No. This is a standard design which has been approved by the DDESB. Any changes to the approved designs, other than minimal site adaptation, would require resubmission and approval by the sponsoring Service’s explosives safety organization and subsequently by the DDESB prior to construction. The Gov has not experienced the issue of not finding precast suppliers, there isn’t one that was used as part of the basis of design. Consider widening the search area for available suppliers.

9. Plan sheet S-001, Soils/ Foundations section, Note 1 says that the Government will accept the risk of soil liquefaction in the event of a seismic occurrence. The specifications contain sections 31 32 19.17 and 19 that describe deep compaction methods for insitu soils. Is the Contractor to densify the existing soils as part of the work on this project or not? It would appear that the plans and specification contradict one another. Any direction you can furnish is appreciated. RESPONSE: Please refer to the revised drawings in Amendment 0002 for clarification.

10. In the event of unexpected and significant supply chain and vendor price increases, will the Contracting Officer entertain and consider a request for equitable adjustment involving cost increases, time extensions to obtain materials from alternate sources or a request for product substitution with an "equal" product? RESPONSE: In such event the contractor is advised to follow the contractual procedures for equitable adjustments. Any requests will be evaluated in accordance to the terms of the contract and the FARS contained within the contract.

11. In the event of unexpected and significant supply chain manufacturing and transit delays will the Contracting Officer entertain and consider a request for equitable adjustment to grant excusable delay time extensions to obtain materials from the current sources or from alternate sources or associated with a request for product substitution with an "equal" product in an effort to mitigate the supply chain delay? RESPONSE: In such event the contractor is advised to follow the contractual procedures for equitable adjustments. Any requests will be evaluated in accordance to the terms of the contract and the FARS contained within the contract.

12. Amendment 0002 issued Monday, 12/27/21, pages 23 and 24 under item #2 Drawings -states "The following DRAWINGS have been REVISED and REISSUED." However, no drawings have been posted on BetaSam. Please advise. RESPONSE: Please revisit the website, plans are posted.

13. Please confirm if there is a geotechnical report for Amendment #2 and circulate. Thank you.

RESPONSE: Geotechnical field notes are included in the drawings; the geotechnical report will be issued FOR INFORMATION ONLY.

14. Drawing S-001 in Addendum 002 states subsurface soils beneath the munitions igloos shall be improved in accordance with the requirements of these contract documents and as described in the GeoTechnical Report No. 21-138. Please provide the GeoTechnical Report.

RESPONSE: Geotechnical field notes are included in the drawings; the geotechnical report will be issued FOR INFORMATION ONLY.

15. Summary of Changes (Amd 0002) indicates there are modifications to the bid schedule with regards to Total Base Bid, Total Optional Items and Total Base + Options. We see no change to the original bid schedule. Will a new bid schedule be issue with intended changes? RESPONSE: Please disregard the note, it was included in error.

16. In Amendment 002 As-Built drawings were provided for Bldgs. 1915, 1916 and 1917 which are not in the contract for demolition. Please clarify the purpose of these six (6) As-Built drawings. RESPONSE: The only available information that we could find on the building slated for demolition is included in amendment 0002. Those only apply for Bldg 1918. Since Bldg 1918 was part of larger complex of similar buildings, references to the other buildings can be disregarded.

17. Detail A-1 on drawing A-501 calls for blinds. Please provide specs for window blinds.

RESPONSE: Refer to the added Specification 12 21 00.

18. Plan sheet S-001, Soils/ Foundations section, Note 6 references a Geotechnical Report.

This report does not appear to be included in the documents provided by the Government.

Please provide a copy of the Geotechnical Report. RESPONSE: Plan Sheet S-001, Soils/ Foundations Note 5 references a Geotechnical Report whose boring logs are provided in Sheets B-100 through B-105, along with additional information and requirements in Various C and S Sheets and the Specifications. Geotechnical report is herby included as a reference ONLY.

19. Please provide dimensions for the concrete headwalls identified on CU102. Detail D2/C503 shows the small center section, however the plan on CU102 shows wings at each location as well. RESPONSE: Detail D1/C-509 provides dimensions for headwall wings based on the diameter of the effluent pipe. The detail reference on CU102 has been updated accordingly.

20. Please clarify the scope of work that the contractor is to perform regarding the installation of the Fire Alarm System. The drawings only show the 2 FACP, there are no Initiating devices or signaling devices shown, nor is there a riser diagram showing required conduit and wiring for any signaling or initiating device. RESPONSE: Provide a complete FA/MNS for the Administration Building and FA system for the Maintenance Bay in accordance with the Contract Documents and referenced criteria. Representative riser diagrams are on Sheet F-001, plans on FA101, and matrix on FA701, all dated September 27, 2021, with Specifications in 283176 for this delegated design to be performed by the contractor requiring approval by Contractor’s Qualified Fire Protection Engineer and by the Government.

21. Please provide the required equipment specifications for the CCTV, Intrusion & Access devices. ie- Cameras, Card Readers, Key Pads, Motion Detectors, Request to Exit PIR, Magnetic Switches, ect. RESPONSE: The project scope-of-work is limited to providing only the infrastructure, raceways and pull strings required to support the future installation of this equipment; it does not include the furnishings and installation of these components and devices. These systems will be installed at a later date by the Government.

22. Please provide information on the Government-Approved Manufacturer Subcontractors for the ESS System. RESPONSE: The project scope-of-work is limited to providing only the infrastructure, raceways and pull strings required to support the future installation of this equipment; it does not include the furnishings and installation of these components and devices. These systems will be installed at a later date by the Government.

23. Keynote 1 and sheet S-710 give so schedule/size for the perforated pipe. Could we get the size? RESPONSE: The foundation drain piping indicated on Sheet S-710 shall be 6 inch diameter, Schedule 40 perforated PVC with the perforations turned downward.

24. Sheet CS-101 shows an underground detention basin east of the Admin building but no details are provided. Can we get clarification on the product used and dimensions?

RESPONSE: This basin was incorrectly labelled and is a surface level detention basin. The callout has been amended accordingly.

25. Sheets CU-101 and CS-101 show underground detention. Are the drawings, designs, dimensions or specs for this item? RESPONSE: This basin was incorrectly labelled and is a surface level detention basin. The callout has been amended accordingly.

26. Item states contractor SHALL handle and properly dispose of all soils found to be contaminated as part of the contract with no additional compensation. Is there an estimated quantity of contaminated soil? Is there a report to show what the soil is contaminated with?

Will there be an allowance set to handle any contaminated soil found? RESPONSE: An optional bid line item has been added as an allowance to handle and properly dispose of 1,000 CY of contaminated soil. This line item will be adjusted accordingly by contract modification using this unit rate based on actual quantities including a credit if actual quantity is less than the allowance.

27. The drawings show us crossing under the road using Jack Boring and steel sleeves. Will alternate methods be acceptable? The concern is the lack of room for the jack boring sending pits. Although we think that the jack boring is possible we would like to propose directional boring as an alternate method as it requires less space and would be much less expensive to do. Please advise. Also would it be acceptable to combine the comm and electrical trenches together and encase both with adequate spacing? RESPONSE: Please propose as shown in the Contract Documents. The successful bidder may propose an alternative for Government consideration via a substitution request during construction.

The following have been modified:

WAGE RATES

"General Decision Number: NJ20220027 01/07/2022

Superseded General Decision Number: NJ20210027

State: New Jersey MY 01/07/2022

Construction Type: Building

County: Burlington County in New Jersey.

BUILDING CONSTRUCTION PROJECTS (does not include single family homes or apartments up to and including 4 stories).

Note: Contracts subject to the Davis-Bacon Act are generally required to pay at least the applicable minimum wage rate required under Executive Order 14026 or Executive Order 13658.

Please note that these Executive Orders apply to covered contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but do not apply to contracts subject only to the Davis-Bacon Related Acts, including those set forth at 29 CFR 5.1(a)(2)-(60).

If the contract is entered into on or after January 30, 2022, or the contract is renewed or extended (e.g., an option is exercised) on or after January 30, 2022, Executive Order 14026 generally applies to the contract. The contractor must pay all covered workers at least $15.00 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on that contract in 2022.

If the contract was awarded on or between January 1, 2015 and January 29, 2022, and the contract is not renewed or extended on or after January 30, 2022, Executive Order 13658 generally applies to the contract. The contractor must pay all covered workers at least $11.25 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on that contract in 2022.

The applicable Executive Order minimum wage rate will be adjusted annually. If this contract is covered by one of the Executive Orders and a classification considered necessary for performance of work on the contract does not appear on this wage determination, the contractor must still submit a conformance request.

Additional information on contractor requirements and worker protections under the Executive Orders is available at www.dol.gov/whd/govcontracts.

Modification Number Publication Date 0 01/07/2022

ASBE0014-003 05/01/2021

BURLINGTON COUNTY (City of Beverly; Townships of Cinnaminson, Delanco, Delron, Edgewater Park, Evesham, Hainesport and Lumberton; Borough of Maple Shade; Township of Medford; Borough of Medford Lakes; Townships of Moorestown and Mt. Laurel;

Borough of Palmyra; Township of Riverside; Borough of Riverton;

Townships of Shamong, Southampton, Tabernacle, Westhampton and Willingboro)

Rates Fringes

ASBESTOS WORKER/HEAT & FROST

INSULATOR (Includes the application of all insulating materials, protective coverings, coatings and finishings to all types of mechanical systems; also, the application of firestopping material to openings and penetrations in walls, floors, ceilings and curtain walls; also, all lead abatement).......................$ 54.35 39.62

* ASBE0089-003 07/01/2021

BURLINGTON COUNTY (Townships of Bordentown, Burlington, Chesterfield, Easthampton, Florence, Mansfield, Mt. Holly, New Hanover, North Hanover, Pemberton, Springfield and Woodland)

ASBESTOS WORKER/HEAT & FROST

INSULATOR ((includes the application of all insulating materials, protective coverings, coatings and finishings to all types of mechanical systems; also, the application of firestopping material to openings and penetrations in walls, floors, ceilings and curtain walls; also, all lead abatement))......................$ 50.50 36.10

PAID HOLIDAYS:

The last day prior to the Christmas and New Year's Day observed holiday: 4 hrs. pay.

BRNJ0002-013 05/01/2021

Rates Fringes

Bricklayer.....................$ 45.20 33.26

Work on high stacks: 22% per hour additional.

BRNJ0007-012 07/05/2021

Rates Fringes

Marble setter...................$ 61.73 37.91

BRNJ0007-014 07/01/2021

Rates Fringes

TERRAZZO WORKER/SETTER...........$ 58.46 38.09

BRNJ0007-017 06/07/2021

Rates Fringes

Tile finisher..................$ 42.05 28.21 Tile setter....................$ 48.94 33.79

Tile finisher:

Work grouting all epoxy: $10.00 additional per day.

CARP0006-009 05/01/2021

Rates Fringes

CARPENTER (Scaffold Builder).....$ 51.89 57%

The first sixty feet at the regular rate, 10% per hour additional for each additional fifty feet thereafter.

CARP0006-010 05/01/2021

Rates Fringes

CARPENTER

Including Acoustical Ceiling Installation, Drywall Hanging, Formwork, Batt and Blown Insulation...$ 51.89 57%

CARP0029-006 05/01/2021

Rates Fringes

Soft floor layer...............$ 51.89 57%

* CARP0454-009 05/01/2021

Rates Fringes

PILEDRIVERMAN....................$ 43.73 35.29

PAID HOLIDAYS:

New Year's Day, Washington's Birthday, Memorial Day, Independence Day, Labor Day, Thanksgiving Day and Christmas Day; provided that the worker works any of the three days in the five-day work week preceding the holiday and the first work day after the holiday.

CARP0715-007 05/01/2020

Rates Fringes

Millwright.....................$ 51.58 58%+0.25

Work of erection and dismantling of elevators and towers, such as concrete conveyors and temporary material elevators, scaffolding or other structures to be used as scaffolding inside or outside of buildings: the first sixty feet at the regular rate, 10% per hour additional for each additional fifty feet thereafter.

ELEC0269-017 07/01/2020

BURLINGTON COUNTY (north of a line following the west and south limits of Burlington Borough from the Delaware River, in a southeasterly direction, to the Burlington - Mt. Holly road;

then, south-southeast along the Burlington - Mt. Holly road to the town of Mt. Holly, includes Mt. Holly; then, east along the Pennsylvania Railroad to the town of New Lisbon, includes New Lisbon; then, continuing along the Pennsylvania Railroad to the Ocean County line)

Electrician and cable splicer (Includes Low Voltage Wiring)....$ 51.71 64.70%

ELEC0351-001 10/04/2021

ATLANTIC COUNTY; BURLINGTON COUNTY (south of a line following the west and south limits of Burlington Borough from the Delaware River, in a southeasterly direction, to the Burlington

- Mt. Holly road; then, south-southeast along the Burlington - Mt. Holly road to the town of Mt. Holly, does not include Mt.

Holly; then, east along the Pennsylvania Railroad to the town of New Lisbon, does not include New Lisbon; then, continuing along the Pennsylvania Railroad to the Ocean County line);

CAMDEN, CAPE MAY, CUMBERLAND, GLOUCESTER AND SALEM

COUNTIES:

Electricians:

Cable splicer on lead cable.$ 46.51 72.54% + .65 Electrician and cable splicer.....................$ 50.19 77.04%+.55

ELEV0005-004 01/01/2018

Rates Fringes

Elevator mechanic..............$ 55.76 32.65

PAID HOLIDAYS:

New Year's Day, Memorial Day, Independence Day, Labor Day, Veteran's Day, Thanksgiving Day, the Friday after Thanksgiving Day, and Christmas Day.

PAID VACATION:

Employer contributes 2% of basic hourly rate as vacation pay credit for 6 months to 5 years of service, and 4% for 5 years or more of service.

ENGI0825-020 07/01/2018

Rates Fringes

Power equipment operators:

GROUP 1.....................$ 51.77 30.45

GROUP 2.....................$ 50.18 30.45

GROUP 3.....................$ 48.27 30.45

GROUP 4.....................$ 46.64 30.45

GROUP 5.....................$ 44.93 30.45

Hazardous waste removal work:

Work on a state or federally designated hazardous waste site, where the worker is in direct contact with hazardous material, and when personal protective equipment is required for respiratory, skin and eye protection: 20% per hour additional.

New Year's Day, Washington's Birthday observed, Memorial Day, Independence Day, Labor Day, Presidential Election Day, Veteran's Day, Thanksgiving Day and Christmas Day; provided

1) that the worker works three of the preceding five work days before the holiday; or, the work day before the holiday and the work day after the holiday; and, 2) that the worker works the work day before and the work day after the holiday.

DEFINITION OF GROUPS:

GROUP 1:

Backhoe, Including Backhoe Track; Boom; Concrete Paving Machine; Crane (all types, including overhead and straddle traveling type); Drill (down-the-hole drill, rotary drill, self-propelled hydraulic drill, self-powered drill);

Elevating Grader; Excavator; Front End Loader (5 cu. yd.

and over); Piledriver (length of boom, including length of leads, shall determine premium rate applicable); Trencher

GROUP 2:

Backhoe Loader Combo; Concrete Pumper; Grader/Blade (Finish);

Hoist; Hydraulic Crane, 10 Tons and under; Front End Loader (2 cu. yd. but less than 5 cu. yd.); Scraper; Side Boom

GROUP 3:

Asphalt Spreader; Bulldozer;Compressor(2 or 3) (in Battery) (within 100 ft.); Forklift; Front End Loader (1 cu. yd.

and over but less than 2 cu. yd.); Lull; Mechanic; Paver, Asphalt; Roller, Blacktop; Tractor;

GROUP 4:

Bobcat/Skid Loader; Compressor (Single); Farm Tractor; Front End Loader (under 1 cu. yd.); Hydroseeder; Roller, Grade;

Pump, Hydraulic

GROUP 5:

Oiler

IRON0068-011 07/01/2016

(Lumberton)

IRONWORKER

Reinforcing.................$ 44.55 20.88 Structural and Ornamental...$ 46.54 20.88

IRON0350-009 07/01/2016

BURLINGTON COUNTY (south and east of a line starting from the point on the Atlantic-Burlington county line where the Atlantic-Burlington county line crosses Route 206; then, following a line northeast through Wharton State Park to the town of Chatsworth; then, continuing along the same line, to the Burlington-Ocean county line)

Ironworkers:

Reinforcing.................$ 47.02 37.75 Structural and Ornamental...$ 48.02 37.75

IRON0399-005 07/01/2018

BURLINGTON COUNTY (north and west of a line starting from the point on the Atlantic-Burlington county line where the Atlantic-Burlington county line crosses Route 206; then, following a line northeast through Wharton State Park to the town of Chatsworth; then, continuing along the same line, to the Burlington-Ocean county line)

IRONWORKER (Structural, Reinforcing and Ornamental)......$ 49.43 29.70

LABO0008-001 05/01/2011

Asbestos Removal Laborer.........$ 28.37 21.62

The removal, abatement, enclosure and decontamination of personal protective equipment, chemical protective clothing and machinery relating to asbestos and/or toxic and hazardous waste or materials which shall include but not necessarily be limited to: the erection, moving, servicing and dismantling of all enclosures, scaffolding and barricades; the operation of all tools and equipment normally used in the removal or abatement of asbestos and toxic or hazardous waste or materials; the labeling, bagging, cartoning, crating, or other packaging of materials for disposal; the clean-up of the worksite; and all other work incidental to the removal, abatement, encapsulation, enclosure, and decontamination of asbestos and toxic or hazardous waste or materials; and, in addition, all work tasks involved in the maintenance and operation of energy resource recovery plants (co-generation plants)

LABO0077-002 05/01/2021

Rates Fringes

LABORER

MASON TENDER:

Brick/Cement/Concrete.......$ 35.25 30.22

LABO0077-004 05/01/2021

Rates Fringes

Laborers:

Asphalt Shoveler, Asphalt Spreader, Landscape Laborer, Pipelayer, Power Toole Operator and Screedman...................$ 34.50 30.22

* PAIN0021-032 05/01/2021

BURLINGTON COUNTY (south of a line drawn between these cities:

Florence to Bustleton to Columbus to Jobstown to Pemberton to Ongs Hat to Chatsworth to Whiting to Pinewald to Ocean Gate to Seaside Heights)

Glazier........................$ 45.67 31.20

Work at 30 ft. above the working surface, or on a swing stage: $1.00 per hour additional.

* PAIN0711-011 05/01/2021

BURLINGTON COUNTY (north of a line drawn between these cities:

Florence to Bustleton to Columbus to Jobstown to Pemberton to Ongs Hat to Chatsworth to Whiting to Pinewald to Ocean Gate to Seaside Heights)

Glazier........................$ 48.50 12%+21.30

Work welding or using a cutting torch: $1.00 per hour additional.

Work on a swing stage scaffold; on a pipe scaffold providing the working height of the platform is 30 ft. or above; and on motorized lifts provided that the height of the lift platform is above the second floor or above thirty feet:

$1.00 per hour additional.

* PAIN0711-018 05/01/2021

Rates Fringes

DRYWALL FINISHER/TAPER...........$ 40.39 26.51

PAIN0711-019 05/01/2017

PAINTER (Brush & Roller).........$ 39.25 22.66 PAINTER (Spray)..................$ 40.28 19.98

PLAS0592-036 05/01/2021

Rates Fringes

CEMENT MASON/CONCRETE FINISHER...$ 44.71 33.92

* PLUM0009-015 07/01/2021

BURLINGTON COUNTY (north of a line drawn from the town of Burlington City, includes Burlington City; then, along County Road Route 541 East, also known as High St., until it reaches the city of Mt. Holly, includes the city of Mt. Holly; then, along Madison Ave. in Mt. Holly to State Road Route 38 East;

then, along State Road Route 38 East until it crosses over State Road Route 206 and becomes County Road Route 530; then, along County Road Route 530 to Magnolia Road, includes Pemberton Borough; then, south on Magnolia Road in Pemberton Township to Magnolia New Lisbon Road (Route 545); then, south on Mt. Holly Misery Road to State Road Route 70 East; then, along State Road Route 70 East to the Ocean County line)

PIPEFITTER (Including HVAC Pipe Installation)...............$ 52.34 42.28 Service and Repair..........$ 37.48 21.08 PLUMBER (Excluding HVAC Pipe Installation)....................$ 52.34 42.28 Service and Repair..........$ 37.48 21.08

PLUM0322-008 05/01/2021

BURLINGTON COUNTY (south of a line drawn from the town of Burlington City, does not include Burlington City; then, along

County Road Route 541 East, also known as High St., until it reaches the city of Mt. Holly, does not include the city of Mt.

Holly; then, along Madison Ave. in Mt. Holly to State Road Route 38 East; then, along State Road Route 38 East until it crosses over State Road Route 206 and becomes County Road Route 530, does not include Pemberton Borough; then, south on Magnolia Road in Pemberton Township to Magnolia New Lisbon Road (Route 545); then, south on Mt. Holly Misery Rd. to State Road Route 70 East; then, along State Road Route 70 East to the Ocean County line)

PIPEFITTER (Including HVAC Pipe Installation)...............$ 46.72 45.69 PLUMBER (Excluding HVAC Pipe Installation)....................$ 46.72 45.69

* ROOF0030-027 05/01/2021

Rates Fringes

Roofer

SHINGLES....................$ 30.50 21.20

SLATE AND TILE..............$ 33.50 21.20

ALL OTHER WORK..............$ 40.33 32.62

Mopper, and operator of felt-laying machine: $.50 per hour additional.

Work applying roofing material, on any new construction job, on those days on which a felt-laying machine or slag dispensing machine is used: $.50 per hour additional.

PAID HOLIDAY:

The last working day before Christmas, to be paid at the rate of four hours pay.

SFNJ0669-006 04/01/2021

SPRINKLER FITTER (Fire Sprinklers)......................$ 52.19 29.08

SFNJ0692-002 05/01/2021

Within 15 miles beyond the city limits of Philadelphia.

Rates Fringes

Sprinkler fitter (Fire Sprinklers)......................$ 60.83 30.34

SHEE0027-009 06/01/2021

Rates Fringes

SHEET METAL WORKER (Including HVAC Duct Installation)..........$ 53.12 43.62

TEAM0469-003 05/01/2020

BURLINGTON COUNTY (east of a line drawn from the New Jersey Turnpike to the Delaware River)

Truck drivers:

Dump Truck..................$ 42.85 34.135 Off the Road Truck..........$ 43.00 34.135

Hazardous waste removal work:

Work on a state or federally designated hazardous waste site, where the worker is in direct contact with hazardous material, and when personal protective equipment is required for respiratory, skin and eye protection: $3.00 per hour additional.

Work on a state or federally designated hazardous waste site, in a zone requiring Level A personal protection for any workers other than the truck driver: $3.00 per hour additional.

Work on a state or federally designated hazardous waste site where the worker is not working in a zone requiring Level A, B or C personal protection: $1.00 per hour additional.

New Year's Day, President's Day, Decoration Day, Independence Day, Labor Day, Presidential Election Day, Veteran's Day, Thanksgiving Day and Christmas Day.

VACATION PAY CREDIT:

Workers working or receiving pay for 80 days within a year receive one week paid vacation (48 hours); 125 days receive two weeks paid vacation (96 hours); 145 days receive 15 days paid vacation (120 hours); 15 years seniority and 145 days receive 4 weeks paid vacation (160 hours).

* TEAM0676-002 05/01/2021

BURLINGTON COUNTY (west of a line drawn from the New Jersey Turnpike to the Delaware River)

Truck drivers:

Dump Truck Drivers..........$ 38.75 29.4211 Off the Road Truck..........$ 39.10 29.4211

Hazardous waste removal work:

Work on a state or federally designated hazardous waste site, where the worker is in direct contact with hazardous materials, and when personal protective equipment is required for respiratory, skin and eye protection: $3.00 per hour additional.

Work on a state or federally designated hazardous waste site, where personal protection A, B, C or D is NOT required:

$1.00 per hour additional.

SHIFT WORK:

An owner mandated irregular shift staring any time other than between 6:00 am and 8:00 am to receive $1.00 per hour, for each hour worked, in addition to the regular rate of pay.

PAID HOLIDAYS:

New Year's Day, President's Day, Memorial Day, Independence Day, Labor Day, Presidential Election Day, Veteran's Day (or the day after Thanksgiving, at the option of the contractor), Thanksgiving Day, the afternoon of the day before Christmas (Dec. 24) provided that the worker works in the morning, and Christmas Day, provided that the worker works or is available for work on at least two days in the week in which the holiday occurs.

BEREAVEMENT PAY:

In case of a death in the worker's immediate famiy (mother, father, wife, husband, children, brother, sister, current mother-in-law, current father-in-law, grandparents), the worker shall be allowed leave not to exceed three (3) days straight-time pay, provided that he or she shall receive no pay unless the day of death and the burial day falls on a regular work day, and not on days off, holidays, vacation, Saturdays or Sundays.

SUNJ2004-003 01/02/2009

Rates Fringes

LABORER: Common or General......$ 19.27 12.42

PLASTERER........................$ 42.33 0.00

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year.

Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is a victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (ii)).

The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of ""identifiers"" that indicate whether the particular rate is a union rate (current union negotiated rate for local), a survey rate (weighted average rate) or a union average rate (weighted union average rate).

Union Rate Identifiers

A four letter classification abbreviation identifier enclosed in dotted lines beginning with characters other than ""SU"" or ""UAVG"" denotes that the union classification and rate were prevailing for that classification in the survey. Example:

PLUM0198-005 07/01/2014. PLUM is an abbreviation identifier of the union, which prevailed in the survey for this classification, which in this example would be Plumbers 0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. 07/01/2014 is the effective date of the most current negotiated rate, which in this example is July 1, 2014.

Union prevailing wage rates are updated to reflect all rate changes in the collective bargaining agreement (CBA) governing this classification and rate.

Survey Rate Identifiers

Classifications listed under the ""SU"" identifier indicate that no one rate prevailed for this classification in the survey and the published rate is derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As this weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SULA2012-007 5/13/2014. SU indicates the rates are survey rates based on a weighted average calculation of rates and are not majority rates. LA indicates the State of Louisiana. 2012 is the year of survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. 5/13/2014 indicates the survey completion date for the classifications and rates under that identifier.

Survey wage rates are not updated and remain in effect until a new survey is conducted.

Union Average Rate Identifiers

Classification(s) listed under the UAVG identifier indicate that no single majority rate prevailed for those classifications; however, 100% of the data reported for the classifications was union data. EXAMPLE: UAVG-OH-0010 08/29/2014. UAVG indicates that the rate is a weighted union average rate. OH indicates the state. The next number, 0010 in the example, is an internal number used in producing the wage determination. 08/29/2014 indicates the survey completion date for the classifications and rates under that identifier.

A UAVG rate will be updated once a year, usually in January of each year, to reflect a weighted average of the current negotiated/CBA rate of the union locals from which the rate is based.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour Division National Office Branch of Wage Surveys. If the response from this initial contact is not satisfactory, then the process described in 2.) and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations. Write to:

Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:

Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISION"

(End of Summary of Changes)