Package 4 - MSA - SID.pdf

JBMDL Munitions Storage Area

PROJECT NUMBER: PTFL 023003

Joint Base McGuire-Dix-Lakehurst, New Jersey

100% Final Design Submission

Structural Interior Design September 27, 2021

5801 Broadway Extension, Suite 500 Oklahoma City, OK 73118

TEL 405 / 840-2931

Prepared for the USACE under AE Contract: W912DS-21-C-0001

FY-21 Munitions Storage Area Updates STRUCTURAL INTERIOR DESIGN PROJECT NUMBER: PTFL023003 27 September 2021 Joint Base McGuire-Dix-Lakehurst, New Jersey 100% Final Design Submission

Table of Contents

1. Narrative of Interior Design Objective ...................................................................................Tab 1

2. Sustainable Design Narrative ................................................................................................Tab 2

3. Floor Plans ............................................................................................................................Tab 3

4. Color Schedule ..................................................................................................................... Tab 4

5. Interior Color Boards .............................................................................................................Tab 5

6. Room Finish Schedule ...........................................................................................................Tab 6

7. Signage Plans and Details ......................................................................................................Tab 7

8. Interior Elevations .................................................................................................................Tab 8

9. Exterior Color Boards ............................................................................................................Tab 9

10. Exterior Elevations .............................................................................................................. Tab 10

11. Furniture Plan ..................................................................................................................... Tab 11

Joint Base McGuire-Dix-Lakehurst, New Jersey 100% Final Design Submission

Statement of Interior Design Objective – Structural Interior Design The design team’s main focus for the interior design is to provide a comfortable professional environment that is aesthetically pleasing, sustainable, efficient, durable, quiet, and easily maintained. Our objective is to instill pride in the facility and promote productivity and excellence within the user. A structural interior design (SID) package is provided which addresses floors, walls, ceilings, and miscellaneous interior finishes.

The overall color palette will increase comfort and productivity, and all finish selections will be in accordance with all applicable codes and standards.

The majority of the interior spaces will be provided with painted gypsum wallboard and acoustical ceiling tile. The floor finish throughout the corridors and break room will be porcelain floor tile. Office spaces and conference room will receive carpet tiles. Sealed concrete floors are to be provided in janitorial closets, mechanical rooms and electrical rooms. The entry vestibule will receive walk off carpet tile to cut down on dirt from outside foot traffic. All areas will receive rubber wall base, except where porcelain floor tile is provided. Those spaces will receive porcelain wall base.

The break room will be provided with base and wall cabinets with plastic laminate face and solid surface countertop material.

The restroom will have porcelain floor tile, as well as a porcelain tile wainscot on the walls in neutral colors. Wall above wainscot will be painted gypsum wallboard. All tile will have a dark grout color, selected for ease of maintenance. Restroom ceilings will be provided with a water-resistant paint finish on a suspended gypsum board ceiling.

Exterior doors are painted steel with hollow metal door frame painted to match. Interior doors are solid-core wood doors with a stained finish and painted hollow metal frames.

The wood stain and hollow metal frame paint color are selected to coordinate with other finishes and furnishings in the building.

Signage will be designed in accordance with the AMC sign standards and UFC 3-120-

01. They will be professionally made and appropriately sized for viewing distance and provided with tactical lettering (braille) as required for ABA standards.

Joint Base McGuire-Dix-Lakehurst, New Jersey 100% Final Design Submission

Sustainable Design Narrative The facility will be designed to meet the requirements of High Performance and Sustainable Buildings (HPSB) Guiding Principles and UFC 1-200-02, High Performance and Sustainable Buildings where economically feasible. An AF Scoresheet has been prepared and is included in Appendix Q. Per UFC 1-200-02, Table 1-1, since the project size is greater than 5,000SF with a cost greater than $3M and 50% ERC, the project will be Third Party Certified (TFP). The TPC will be Guiding Principles Compliance for New Construction and Modernization (Scoping checklist included in Appendix D).

All interior finishes are selected to meet the environmental goals of the US Army Corps of Engineers including life cycle costs, recycled content and environmental performance. While improving the interior environment and reducing the negative impact on the exterior environment the durability and maintenance of the interior materials will not be sacrificed.

A tremendous focus is put on indoor air quality to reduce the negative impact that new building materials have on an occupant’s health. Sealers and paints are low VOC to reduce harmful emissions. Better indoor air quality will positively impact the health and productivity.

Recycled content and biologically based products are specified for all applicable products. References and links to products are provided in Specification Section 01 33 29, Sustainability Reporting.

Waste diversion will also be addressed as part of the design. Recyclables will be stored and sorted per the Joint Base McGuire-Dix-Lakehurst recycling program to divert 50% of non-hazardous solid waste and 60% of construction demolition debris from landfills.

A joint base recycling center is located at 2321 Radin Road for various recycled materials such as paper, plastic, glass, scrap metal, cardboard, toner cartridges, pallets, tires, coated wire, rechargeable batteries and construction debris. Sixty percent (60%) of construction demolition debris will be diverted to the Radin Road Joint Base Recycling Center.

11010

108106

114113

24'-0" 3'-4" 4'-8" 3'-4" 8'-0" 3'-4" 2'-0"

106A 108A

107A

103B

102A103A

101A

116A

115A

114A

113A

112A

111A110A109A

IN1

100B

100A

104A

IN2

1/ 2"

1/

2"

48'-8"

A1 A-201

A4 A-201

C4 A-201

C1 A-201

A3 A-301

A3 A-301

B3 A-303

B2 A-401

B5 A-401

'-8

12' - 5 1/2" 8' - 1 1/4" 5' - 11" 19' - 9 1/4"

8'-1 5/8"

4'-5 1/4"

7'-11 7/8" 5'-11" 2'-2" 6'-5" 1'-3 1/2" 9'-10 3/4"

'-1

/4

7'

-5

2' -8

/2

"10 '-6

" 4' -8

/2

8'

-8

6' -1

/4

AA

BB

FEC

SIGNAGE,TYP

REFER A-602

4X4 PREFIN METAL

DOWNSPOUT

C3 A-301

B1

B1B1B1

B1 B1

1/

2"

'-1

1/ 2"

6' -0

'-4

6' -0

'-1

1/ 2"

1/

2"

8 1/2" 7'-3 1/2" 6'-0" 7'-4" 1'-4"

3'-4" 1'-4"

7'-4" 6'-0" 7'-3 1/2" 8 1/2"

'-1

1/

2" 6'

-0

'-4

1'

-4

3' -4

1'

-4

'-1

1/

2" B1

A1

A1

B1

A1

B1

B1

A1 B1

B1

A1

B1

A1

FE FE

FE

101B

A1

4' -0

2'

-0

RECESSED

KNOX BOX

A3 A-301

B3 A-303

5X5 PREFIN

METAL GUTTER

(SSSR1) STEEL

STANDING SEAM

ROOF

5X5 PREFIN

METAL GUTTER

(SSSR1) STEEL

STANDING SEAM

ROOF

5" / 1'-0" 5" / 1'-0"

AA

BB

4X4 PREFIN METAL

DOWNSPOUT

C3 A-301

SNOW AND ICE

RETENTION SYSTEM,

TYP REFER A5/A-503

SNOW AND ICE

RETENTION

SYSTEM, TYP

REFER A5/A-503

VTR, CENTERED ON

WIDTH OF ROOF

PANEL WITH PREFAB

FLASHING BOOT TO

MATCH ROOF COLOR,

REFER: A3/A-503

PREFIN METAL

RAKE FLASHING

PREFIN METAL

RIDGE CAP

PREFIN METAL

RIDGE CAP

SLOPE

5" / 1'-0"

SLOPE

5" / 1'-0"

FALL PROTECTION

SYSTEM. REFER

A5/A-503

TYP.

2'-8"

TYP.

15'-7 1/2"

5"

1' -0

5"

1'

-0

TY

P.

'-7

A3 A-301

B3 A-303

EIFS SOFFIT

EIFS SOFFIT

114113

110109

AA

BB

47'-3"

'-3

47'-3"

'-3

C3 A-301

LIGHT

FIXTURE

LIGHT

FIXTURES

A1 A-503

TYPICAL CEILING LEGEND

2' x 4' CEILING GRID

GYP BD CEILING

2' x 4' FLUORESCENT FIXTURE - EMERGENCY

RECESSED DOWNLIGHT

EXIT SIGNS

WALL MTD EXTERIOR LIGHT

SUPPLY AIR DIFFUSERS

RETURN AIR GRILLES

2' x 4' FLUORESCENT FIXTURE

1' x 4' FLUORESCENT FIXTURE - EMERGENCY

RECESSED DOWNLIGHT - EMERGENCY

4' FLUORESCENT FIXTURE - STRIP

TYPICAL WALL LEGEND

BRICK VENEER

ARCH PRECAST

B roa dw ay

E xte ns ion

, S uit e 5

Ok lah om a C ity , O

K

8-

5.8

.29

| f sb -a e.c om

SHEET

REFERENCE

NUMBER

FY

M U

N

IT

IO

N

S

ST

O R

AG

E

AR

EA

Jo in t B as e M cG ui re -D ix -L ak eh ur st

, N ew

J er se y

M

AY

N

YD

A

/E B

O R

D

ER

FI

LE

N

AM

E:

Su bm itt ed b y:

Pl ot D at e:

FS

B

AN

SI

D

U . S

. A

RM

Y

EN

G

IN

EE

R

D

IS

TR

IC

T N

EW

Y

O R

K ht tp w w w .n an .u sa ce

.a rm y.

m il

FS

B

SE

PT

EM

BE

R

7, SO

LI

C

IT

AT

IO

N N

O

FI

LE

N

AM

E:

D W

N B

Y:

C

KD

B

Y:

D

ES

IG

N

ED

B

Y:

D

AT

E:

SI

ZE

SU

BM

IT

TE

D B

Y:

PL

O

T D

AT

E:

C O

N

TR

AC

T

N O

PL

O

TT

ED

B Y:

US Army Corps of Engineers

New York District

D

ES

C R

IP

TI

O N

M

AR

K

AP

PR

D

AT

E M

AR

K

D

ES

C R

IP

TI

O N

D

AT

E

AP

PR

D

2 3

C

4 5

A

B

0 1"

THIS BAR IS ONE INCH ON

ORIGINAL DRAWING

IF NOT ONE INCH ON THIS

SHEET, ADJUST SCALES

ACCORDINGLY

xx xx c-xx x.

dg n

C :\U se rs

\d ap

\D oc um en ts \0

_A rc h_ da vi da pa lm er .rv t9/

/2

:0 4:

A

M

9/

/2

:0 4:

A

M

A-101

AD

M

IN

IS

TR

AT

IO

N

PL

A N

S

O

AE

O

AE

JM

I

O

AE

SCALE: 1/8" = 1'-0"

A3 ADMIN-FLOOR PLAN

SCALE: 1/8" = 1'-0"

A1 ADMIN-ROOF PLAN

SCALE: 1/8" = 1'-0"

C1 ADMIN-REF CEILING PLAN

ROOM NAME SCHEDULE

ROOM NO. ROOM NAME

100 VEST

101 MUNITIONS CTRL

102 CTRL NCOIC

103 FLIGHT CHIEF

104 CORRIDOR

105 BREAK

106 SHOWER

107 UNISEX

108 STORAGE

109 COMM

110 ELEC

111 MECH

112 JAN

113 OFFICE

114 NCOIC OPS

115 INVENTORY CTRL OPS

116 CONF

117 CORRIDOR

N

GENERAL NOTES

A. ALL PERIMETER FLOOR PLAN DIMENSIONS ARE

NOMINAL MASONRY INCLUDING DOORS UNLESS

NOTED OTHERWISE.

B. ALL EXTERIOR FLOOR PLAN OVERALL AND

CORNER DIMENSIONS ARE CALCULATED FROM

THE OUTERMOST FACE OF MASONRY VENEER

MATERIALS AT THE BASE OF WALLS.

C. ALL INTERIOR DIMENSIONS ARE TO THE FACE OF

STUD OR FACE OF CMU AS INDICATED - UNLESS

NOTED OTHERWISE.

D. REFER B2/A-601 FOR PARTITION TYPES

0 4' 8' 16'

1/8" = 1'-0"

C R

BM

S

BM

S

BM

S

BM

S

BM

S

C R

BM

S

4" 6'

-0

'-0

1'

-4

3' -4

1'

-4

4" 5'

-0

MAINTENANCE

BAY

001A

D1 A-102

D3 A-102

D5 A-102

A3 A-302

A3 A-302

40'-0"

D3 A-102

001D

M2

M2

M1

M1

MBMB

MAMA

4" 6'

-0

'-0

1'

-4

3' -4

1'

-4

4"

6" BOLLARD

CENTER ALIGNED

WITH OPENING,

TYP REFER 1/C-506

4x4 PREFIN METAL

DOWNSPOUT.

CONNECTED TO

STORM DRAIN

'-8

4" 1'-0" 37'-4" 1'-0" 4"

C3 A-302

C3 A-302

AIR

COMPRESSOR

EYEWASH/

SHOWER

ELECTRICAL

PANEL

EXISTING STRUCTURE

FE

TYP

2'-0"

TYP

2'-0"

AIR HANDLING UNIT

001B001C

RECESSED

KNOX BOX.

MOUNT TO

FACE OF

CMU 2'

-0

4X4 PREFIN METAL

DOWNSPOUT &

SPLASHBLOCKS

4X4 PREFIN METAL

DOWNSPOUT &

SPLASHBLOCKS

4x4 PREFIN METAL

DOWNSPOUT.

CONNECTED TO

STORM DRAIN

TIE EXISTING DOWNSPOUTS INTO STORM DRAIN

FIRE RISER

SIGNAGE

HYDRANT

SIGNAGE

A3 A-302

A3 A-302

(SSSR1) STEEL

STANDING SEAM

ROOF

PREFIN METAL 5X5

GUTTER

(SSSR1) STEEL

STANDING SEAM

ROOF

PREFIN METAL

RIDGE CAP

M2

M2

M1

M1

MBMB

MAMA

4x4 PREFIN METAL

DOWNSPOUT

C3 A-302

C3 A-302

SNOW GUARDS,

TYP REFER

A5/A-503

PREFIN METAL 5X5

GUTTER

FALL PROTECTION

SYSTEM. REFER

A5/A-503

TYP.

3'-6"

TYP.

15'-2"

TY

P

'-9

FINISH FLOOR

100'-0"

MAINT. TRUSS

BEARING

120'-0"

(SSSR1) STEEL STANDING

SEAM ROOF

PREFIN METAL 5X5

GUTTER

4" EXTERIOR INSULATION

FINISH SYSTEM

PREFIN

OVERHEAD

SECTIONAL DOOR

STEEL DOOR

MB MA

6" BOLLARD, TYP

REFER 1/C-506

4x4 PREFIN METAL

DOWNSPOUT

CONNECTED TO

STORM DRAIN

LIGHT FIXTURE CENTERED

ABOVE OPENING

C3 A-302

C3 A-302

8' -0

CONTROL JOINT

REFER B5/A-102,

ALIGN WITH

SECTIONAL DOOR

PREFIN METAL

FLASHING

CONTROL

JOINT

REFER

B5/A-102

SNOW

GUARDS, TYP

PREFIN METAL

RIDGE CAP

CMU WALL WITH

CEMENTITIOUS

COATING TO

MATCH EIFS

FALL

PROTECTION

SYSTEM

5" / 1'-0" 5" / 1'-0"

2'-0"

4' -0

RECESSED

KNOX BOX.

MOUNT TO

FACE OF

CMU

4x4 PREFIN

METAL

DOWNSPOUT

& SPLASH

BLOCK

SECURITY

CAMERA

ANTENNA

FINISH FLOOR

100'-0"

MAINT. TRUSS

BEARING

120'-0"

A3 A-302

A3 A-302

SNOW GUARDS,

TYP PREFIN METAL 5X5

GUTTER

4" EXTERIOR

INSULATION

FINISH SYSTEM

M2 M1

4x4 PREFIN

METAL

DOWNSPOUT &

SPLASH BLOCK

CONTROL JOINT

REFER B5/A-102

CONTROL JOINT

REFER B5/A-102

PREFIN METAL

FLASHING

(SSSR1) STEEL

STANDING SEAM

ROOF

PREFIN METAL

RIDGE CAP

CMU WALL WITH

CEMENTITIOUS

COATING TO

MATCH EIFS

FALL PROTECTION

SYSTEM

5" / 1'-0" 5" / 1'-0"

MECHANICAL

LOUVER

'-4

1'

-4

1'-4"6'-4"

AIR HANDLING

UNIT

SECURITY

CAMERA

FIRE

DEPARTMENT

CONNECTION

6" BOLLARD, TYP

REFER 1/C-506

LIGHT FIXTURE

ANTENNA

FINISH FLOOR

100'-0"

MAINT. TRUSS

BEARING

120'-0"

(SSSR1) STEEL

STANDING SEAM

ROOF

PREFIN METAL 5X5

GUTTER

4" EXTERIOR

INSULATION FINISH

SYSTEM

PREFIN

OVERHEAD

SECTIONAL DOOR

STEEL DOOR

MBMA

4x4 PREFIN METAL

DOWNSPOUT &

SPLASH BLOCK

6" BOLLARD, TYP

REFER 1/C-506

LIGHT FIXTURE

CENTERED ON

OPENING

C3 A-302

C3 A-302

8' -0

CONTROL JOINT

REFER B5/A-102,

ALIGN WITH

SECTIONAL DOOR

CONTROL JOINT

REFER B5/A-102

SNOW

GUARDS, TYP

PREFIN METAL

FLASHING

PREFIN METAL

RIDGE CAP

CMU WALL WITH

CEMENTITIOUS

COATING TO

MATCH EIFS

'-0

FALL PROTECTION

SYSTEM

5" / 1'-0" 5" / 1'-0"

4x4 PREFIN

METAL

DOWNSPOUT.

TIE INTO

STORM DRAIN

SECURITY CAMERA

3/4" 1/2" 3/4"

135° 135°

4" EXTERIOR

INSULATION FINISH

SYSTEM

12" CMU WALL

CONT SEALANT

COLOR MATCHED

TO EIFS WITH

BACKER ROD

2"

3/ 4"

VERTICALLY

NOTCHED ADHESIVE

FOR DRAINAGE AND

AIR BARRIER

B roa dw ay

E xte ns ion

, S uit e 5

Ok lah om a C ity , O

K

8-

5.8

.29

| f sb -a e.c om

SHEET

REFERENCE

NUMBER

FY

M U

N

IT

IO

N

S

ST

O R

AG

E

AR

EA

Jo in t B as e M cG ui re -D ix -L ak eh ur st

, N ew

J er se y

M

AY

N

YD

A

/E B

O R

D

ER

FI

LE

N

AM

E:

Su bm itt ed b y:

Pl ot D at e:

FS

B

AN

SI

D

U . S

. A

RM

Y

EN

G

IN

EE

R

D

IS

TR

IC

T N

EW

Y

O R

K ht tp w w w .n an .u sa ce

.a rm y.

m il

FS

B

SE

PT

EM

BE

R

7, SO

LI

C

IT

AT

IO

N N

O

FI

LE

N

AM

E:

D W

N B

Y:

C

KD

B

Y:

D

ES

IG

N

ED

B

Y:

D

AT

E:

SI

ZE

SU

BM

IT

TE

D B

Y:

PL

O

T D

AT

E:

C O

N

TR

AC

T

N O

PL

O

TT

ED

B Y:

US Army Corps of Engineers

New York District

D

ES

C R

IP

TI

O N

M

AR

K

AP

PR

D

AT

E M

AR

K

D

ES

C R

IP

TI

O N

D

AT

E

AP

PR

D

2 3

C

4 5

A

B

0 1"

THIS BAR IS ONE INCH ON

ORIGINAL DRAWING

IF NOT ONE INCH ON THIS

SHEET, ADJUST SCALES

ACCORDINGLY

xx xx c-xx x.

dg n

C :\U se rs

\d ap

\D oc um en ts \0

_A rc h_ da vi da pa lm er .rv t9/

/2

:0 5:

A

M

9/

/2

:0 5:

A

M

A-102

M

AI

N

TE

N

AN

C E

BA

Y

PL

A N

S

AN

D

EL

EV

AT

IO

N

S

O

AE

O

AE

JM

I

O

AE

SCALE: 3/16" = 1'-0"

A1 MAINT BAY - FLOOR PLAN

SCALE: 3/16" = 1'-0"

A4 MAINT BAY - ROOF PLAN

SCALE: 3/16" = 1'-0"

D1

MAINT BAY -

WEST ELEVATION

SCALE: 3/16" = 1'-0"

D3

MAINT BAY - NORTH ELEVATION

(SOUTH ELEVATION SIM)

SCALE: 3/16" = 1'-0"

D5

MAINT BAY -

EAST ELEVATION

SCALE: 6" = 1'-0"

B5 EIFS CONTROL JOINT

4' 12'8'0

3/16" = 1'-0"

0 1" 2" 4"

6" = 1'-0"N

USACE/NY MUNITIONS STORAGE AREA (FSB2020-291-00) 100% FINAL DESIGN SUBMISSION

JOINT BASE MCGUIRE-DIX-LAKEHURST, NJ SEPTEMBER 27, 2021

SECTION 09 06 00

SCHEDULE FOR FINISHES

05/09

PART 1 GENERAL

1.1 SYSTEM DESCRIPTION

This section covers only the color of the exterior and interior materials and products that are exposed to view in the finished construction. The word "color", as used herein, includes surface color and pattern.

Requirements for quality and method of installation are covered in other appropriate sections of the specifications. Specific locations where the various materials are required are shown on the drawings. Items not designated for color in this section may be specified in other sections.

When color is not designated for items, propose a color for approval.

1.2 SUBMITTALS

Government approval is required for submittals with a "G" designation;

submittals not having a "G" designation are for information only. When used, a designation following the "G" designation identifies the office that will review the submittal for the Government. Submit the following in accordance with Section 01 33 00 SUBMITTAL PROCEDURES:

SD-04 Samples

Color Schedule; G, RO

PART 2 PRODUCTS

2.1 REFERENCE TO MANUFACTURER'S COLOR

Where color is shown as being specific to one manufacturer, an equivalent color by another manufacturer may be submitted for approval.

Manufacturers and materials specified are not intended to limit the selection of equal colors from other manufacturers.

2.2 COLOR SCHEDULE

The color schedule lists the colors, patterns and textures required for exterior and interior finishes, including both factory applied and field applied colors. Submit 3 sets of color boards, 120 days after the Contractor is given Notice to proceed, complying with the following requirements:

a. Color boards shall reflect all actual finish textures, patterns, and colors required for this contract.

b. Materials shall be labeled with the finish type, manufacturer's name, pattern, and color reference.

c. Samples shall be on size 8-1/2 by 11 inch boards with a maximum spread of size 25-1/2 by 33 inches for foldouts.

d. Samples for this color board are required in addition to samples

SECTION 09 06 00 Page 1 requested in other specification sections.

2.2.1 Exterior Walls

Exterior wall colors shall apply to exterior wall surfaces including recesses at entrances and projecting vestibules. Conduit shall be painted to closely match the adjacent surface color. Wall color shall be provided to match the colors listed below.

2.2.1.1 Brick:

BR1: Taylor Clay Products; #373 Autumn Blend, wire cut

2.2.1.2 Mortar:

Match WR-14C by Keystone Co.

2.2.1.3 Paint:

Match Federal Standard 595 Color 20040 (Dark Brown)

2.2.1.4 Insulation and Finish System:

EF1: Match Color "Wheatsheaf" by M.A. Bruder

2.2.1.5 Precast:

CS1: WN Russel and Co.; Color Dark Bluff Limestone

2.2.2 Exterior Trim

Exterior trim shall be provided to match the colors listed below.

2.2.2.1 Steel Doors and Door Frames:

Match Federal Standard 595 Color 20040 (Dark Brown)

2.2.2.2 Soffits:

EF1: Match Color "Wheatsheaf" by M.A. Bruder

2.2.2.3 Downspouts, Gutters, Louvers, and Flashings:

Match SSMR1

2.2.2.4 Caulking and Sealants:

Match color of adjacent materials.

2.2.3 Exterior Roof

Roof color shall apply to exterior roof surfaces including sheet metal flashings and copings, mechanical units, roof trim, pipes, conduits, electrical appurtenances, and similar items. Provide roof color to match the colors listed below.

2.2.3.1 Metal:

SSMR1: FS 595 Color 20040 Dark Brown

SECTION 09 06 00 Page 2

2.2.3.2 Snow Guards:

SnoBklox Deuce; Color: Clear

2.2.3.3 Penetrations:

Shall match roof in color.

2.2.4 Interior Floor Finishes

Provide flooring materials to match the colors listed below.

2.2.4.1 Fuel Resistive Flooring

FRF1: TENNANT COATINGS, HD-HTS 5-PART EPOXY FLOOR COATING - COLOR:

LIGHT GRAY WITH LIGHT SAND BROADCAST

2.2.4.2 Carpet Tile:

CPT1: Shaw; Prisma Tile 59463/Blue Smoke 63481, 24 x 24 inch CPT2: Walk-off Carpet Tile - Shaw; Portal Tile 5T035 / Ebony 34500, 24 x 24 inch

2.2.4.3 Porcelain Tile:

PFT1: Daltile; Industrial Park / Charcoal Gray IP09, 12 x 12 inch

2.2.4.4 Grout:

GR1: Mapei; epoxy grout, 11 Sahara Beige

2.2.5 Interior Base Finishes

Provide base materials to match the colors listed below.

2.2.5.1 Resilient Base and Moldings:

RB1: Roppe; Pinnacle rubber base/150 Dark Grey, 4 inches high continuous

2.2.5.2 Porcelain Tile:

PB1: Daltile; Industrial Park / Charcoal Gray IP09, 6 x 12 inch cove

2.2.5.3 Grout:

GR1: Mapei; epoxy grout, 11 Sahara Beige

2.2.6 Interior Wall Finishes

Interior wall color shall apply to the entire wall surface, including reveals, vertical furred spaces, grilles, diffusers, electrical and access panels, and piping and conduit adjacent to wall surfaces unless otherwise specified. Items not specified in other paragraphs shall be painted to match adjacent wall surface. Provide wall materials to match the colors listed below.

SECTION 09 06 00 Page 3

2.2.6.1 Paint:

PT1: Sherwin-Williams; SW7015 Repose Gray, Satin Latex; Walls, General PT4: Sherwin-Williams; SW7005 Pure White, Satin Latex;

Maintenance Bay Walls

2.2.6.2 Porcelain Tile:

PWT1: Daltile; Volume 1.0 / Degress Silver VL71, 6 x 6 inch and 4 x 12 inch bullnose; matte

2.2.6.3 Porcelain Tile Grout:

GR1: Mapei; epoxy grout, 11 Sahara Beige

2.2.7 Interior Ceiling Finishes

Ceiling colors shall apply to ceiling surfaces including soffits, furred down areas, grilles, diffusers, registers, and access panels. Ceiling color shall also apply to joist, underside of roof deck, and conduit and piping where joists and deck are exposed and required to be painted.

Provide ceiling materials to match the colors listed below.

2.2.7.1 Acoustical Tile and Grid:

ACT1: Armstrong; Fine Fissured, White, #1824, 24 x 48 inch Grid: Armstrong; Prelude XL, 15/16 inch exposed tee, white

2.2.7.2 Paint:

PT4: Sherwin-Williams; SW7005 Pure White, Satin Latex, Ceilings

2.2.7.3 Exposed Metal Deck:

PT4: Sherwin-Williams; SW7005 Pure White, Satin Latex

2.2.7.4 Exposed Structural Framing:

PT4: Sherwin-Williams; SW7005 Pure White, Satin Latex

2.2.8 Interior Trim

Provide interior trim to match the colors listed below.

2.2.8.1 Steel Doors:

PT3: Sherwin-Williams; SW7015 Repose Gray, Low Sheen Enamel

2.2.8.2 Steel Door and Borrowed Light Frames:

PT2: Sherwin-Williams; SW7075 Web Gray, Low Sheen Enamel

2.2.8.3 Wood Doors:

White Birch

SECTION 09 06 00 Page 4

2.2.8.4 Wood Stain:

ST1: Sherwin Williams / Minwax; MW273 Espresso

2.2.8.5 Fire Extinguisher Cabinets:

White

2.2.8.6 Exposed Ductwork:

PT4: Sherwin-Williams; SW7005 Pure White, Satin Latex

2.2.9 Interior Window Treatment

Provide window treatments to match the colors listed below.

2.2.9.1 Horizontal Blinds:

BL1: Levolor; Riviera 1 inch Classic/00034 Brushed Aluminum

2.2.10 Interior Miscellaneous

Provide miscellaneous items to match the colors listed below.

2.2.10.1 Plastic Laminate:

PLAM1: Wilsonart; Montana Walnut 7110-78

2.2.10.2 Solid Surfacing Material:

SSM1: Wilsonart; Arctic Dune 9253CM

2.2.10.3 Signage Message Color:

2/90 Sign Systems; #208 White (excluding accessible signage)

2.2.10.4 Signage Background Color:

2/90 Sign Systems; #234 Dark Grey (excluding accessible signage)

2.2.10.5 Signage Frame Color:

2/90 Sign Systems; #101 Satin Natural

2.2.10.6 Wall Switch Handles and Standard Receptacle Bodies:

White

2.2.10.7 Electrical Device Cover Plates:

Brushed Stainless Steel

PART 3 EXECUTION (Not Applicable)

-- End of Section --

SECTION 09 06 00 Page 5

THIS PAGE INTENTIONALLY LEFT BLANK

SECTION 09 06 00 Page 6

INTERIOR FINISHES

FY21 Munitions Storage Area Joint Base McGuire Dix Lakehurst, New Jersey SID Color Boards - Structural Interior Design

CPT1: Carpet Tile

Installation Photo

R 1: Rubber BaseB

A 1: Acoustical CT Ceiling Tile

Installation PhotoP 4: T Ceiling Paint

FY21 Munitions Storage Area Joint Base McGuire Dix Lakehurst, New Jersey SID Color Boards - Structural Interior Design

P 1: Porcelain Floor TileFT P 1: Porcelain Tile BaseB

P 1: Plastic LaminateLAM

SSM1: Solid Surface Material

P : Porcelain WT1 Wall Tile

G 1 Tile GroutR : Porcelain

FY21 Munitions Storage Area

P 1/PT3: Field Paint / T Steel Door Paint

P 2: Door Frame PaintT

S 1: Signage Message G S 2: SignageG Background S 3: Signage Frame G

ST1: Wood Door Stain

CPT2: Walk off Carpet Tile B 1: Louver BlindsL

FY21 Munitions Storage Area

FRF1: Resinous Flooring

FY21 Munitions Storage Area

D O

O R

H

EI

G H

T

DOOR WIDTH

SFX STEEL, EXTERIOR

WFI WOOD, INTERIOR

D O

O R

H

EI

G H

T

DOOR WIDTH

SDX INSULATED SECTIONAL

OVERHEAD DOOR, EXTERIOR

D O

O R

H

EI

G H

T

DOOR WIDTH

1/4"

TEMPERED

SAFETY

GLAZING

WGI WOOD, INTERIOR

3' -4

SH

U

TT

ER

H

EI

G

H T

SHUTTER WIDTH

RFSD ROLLING FIRE SHUTTER,

INTERIOR, 45 MIN FR

CLNG

SCHED

S2 STEEL

D O

O R

H

EI

G H

T 2"

2" 2"DOOR WIDTH

S4 STEEL

D O

O R

H

EI

G H

T 4"

2" 2"DOOR WIDTH

FINISH FLOOR

4'-0" 2" 3'-8" 2"

3' -2

2"

3' -8

2"

TYPE NOTES

HEAD

JAMB

SILL

IN2

A1/A-503 A2/A-503 A3/A-503

1/4" TEMPERED

SAFETY GLAZING

3'-0" 2" 2'-8" 2"

3' -2

2"

3' -8

2"

TYPE NOTES

HEAD

JAMB

SILL

IN1

A1/A-501 A2/A-501 A1/A-501

1/4" TEMPERED

SAFETY GLAZING

SLIDING PANELS

NON-RATED PARTITIONA1

5/8" GWB

(BOTH SIDES)

FINISH

FLOOR

BOTTOM CORD

OF TRUSS

SLOTTED

DEFLECTION TRACK

SCHEDULED CLG

STEEL RUNNER

CHANNELBASE AS

SCHEDULED

3-5/8" STUDS

AT 16" OC

UNFACED

SOUND BATT

B1

5/8" GWB

(BOTH SIDES)

FINISH

FLOOR

METAL DECK

SLOTTED

DEFLECTION TRACK

SCHEDULED CLG

STEEL RUNNER

CHANNEL

BASE AS

SCHEDULED

3-5/8" STUDS

AT 16" OC

UNFACED

SOUND BATT

FINISH FLOOR

CONT SEALANT

BOTH SIDES ,TYP

NON-RATED PARTITION AS SHOWN ABOVE

WITH 6" STUDS IN LIEU OF 3 5/8" STUDS

AND TILE BACKING BOARD WHERE FINISH

IS WALL TILE, EXTENDING TO DECK

A3

PROVIDE UL ASSEMBLY

HW-D-0042 TO DECK

1 HR. RATED PARTITION, UL # U419

PROVIDE 3 5/8" METAL

STUD BRACING @ 4'-0" O.C.

WHEN PARALLEL TO TRUSS

B2

B3

1 HR. RATED PARTITION AS SHOWN

ABOVE WITH TILE BACKING BOARD

WHERE FINISH IS WALL TILE, UL # U419

1 HR. RATED PARTITION AS SHOWN

ABOVE WITH 6" STUDS IN LIEU OF 3 5/8"

STUDS AND TILE BACKING BOARD WHERE

FINISH IS WALL TILE, UL # U419

NON-RATED PARTITION AS SHOWN ABOVE

WITH TILE BACKING BOARD WHERE FINISH

IS WALL TILE EXTENDING TO DECK

A2

NON-RATED PARTITION AS SHOWN ABOVE

EXTENDING TO DECK

A4

WHERE THERE IS AN ACCESSIBLE CONCEALED FLOOR,

FLOOR-CEILING OR ATTIC SPACE, FIRE WALLS, FIRE

BARRIERS, FIRE PARTITIONS, SMOKE BARRIERS AND

SMOKE PARTITIONS OR ANY OTHER WALL REQUIRED

TO HAVE PROTECTED OPENINGS OR PENETRATIONS

SHALL BE EFFECTIVELY AND PERMANENTLY

IDENTIFIED WITH SIGNS OR STENCILING IN THE

CONCEALED SPACE ABOVE INSTALLED CEILING. SUCH

IDENTIFICATION SHALL:

1. BE LOCATED WITHIN 15'-0" OF THE END OF EACH

WALL AND AT INTERVALS NOT EXCEEDING 30'-0"

MEASURED HORIZONTALLY ALONG THE WALL OR

PARTITION.

2. INCLUDE LETTERING NOT LESS THAN 3 INCHES IN

HEIGHT WITH A MINIMUM 3/8 INCH STROKE IN A

CONTRASTING COLOR INCORPORATING THE

SUGGESTED WORDING, "FIRE AND/OR SMOKE

BARRIER-PROTECT ALL OPENINGS," OR OTHER

WORDING APPROVED BY THE AHJ.

PARTITION MARKING & ID

UFC 3-600-01 SECTION 7-2 & IBC 2018 SECTION 703.7

NOTE: IN SPACE WITH NO CEILING THE MARKINGS

SHALL BE 12'-0" ABOVE FINISHED FLOOR. MARKING

SHALL BE LEVEL. LETTER COLOR SHALL BE RED.

MARKING SHALL BE ON BOTH SIDES OF THE WALL OR

PARTITION.

TYPICAL PARTITION NOTES

A. ALL INTERIOR PARTITION STEEL STUDS SHALL BE 16

GAUGE AT 16" OC INCLUDING 16 GAUGE BOTTOM

RUNNER CHANNELS AND 16 GAUGE 3" LONG LEG TOP

DEFLECTION TRACK WITH 16 GAUGE UPPER

HORIZONTAL SPACER BARS.

B. ALL GYPSUM WALL BOARD SHALL BE CUT SNUGGLY

TO FIT AND SEALED COMPLETELY AIRTIGHT WITH

REQUIRED SEALANT FOR EITHER FIRE RATING OR

SOUND ATTENUATION AT ALL STRUCTURAL AND

M/E/P PENETRATIONS THROUGH ALL NON-STC AND

STC INTERIOR PARTITIONS SCHEDULED WITH FULL

HEIGHT GYPSUM WALL BOARD ON ONE OR BOTH

SIDES.

C. FILL ALL PERIMETER VOIDS AND HEAD OF WALL

METAL DECK FLUTES TO ACHIEVE COMPLETE

CLOSURE AND SEAL BOTH SIDES.

D. ALL UNFACED SOUND BLANKETS WHERE INDICATED

SHALL:

a. FILL THE ENTIRE STUD CAVITY WIDTH AND

THICKNESS.

b. BE INSTALLED CONTINUOUS VERTICALLY.

c. BE CUT TIGHT TO FIT WITH NO VOIDS.

d. BE ADHERED IN PLACE TO PREVENT SLIPPAGE

DOWN THE CAVITY.

B roa dw ay

E xte ns ion

, S uit e 5

Ok lah om a C ity , O

K

8-

5.8

.29

| f sb -a e.c om

SHEET

REFERENCE

NUMBER

FY

M U

N

IT

IO

N

S

ST

O R

AG

E

AR

EA

Jo in t B as e M cG ui re -D ix -L ak eh ur st

, N ew

J er se y

M

AY

N

YD

A

/E B

O R

D

ER

FI

LE

N

AM

E:

Su bm itt ed b y:

Pl ot D at e:

FS

B

AN

SI

D

U . S

. A

RM

Y

EN

G

IN

EE

R

D

IS

TR

IC

T N

EW

Y

O R

K ht tp w w w .n an .u sa ce

.a rm y.

m il

FS

B

SE

PT

EM

BE

R

7, SO

LI

C

IT

AT

IO

N N

O

FI

LE

N

AM

E:

D W

N B

Y:

C

KD

B

Y:

D

ES

IG

N

ED

B

Y:

D

AT

E:

SI

ZE

SU

BM

IT

TE

D B

Y:

PL

O

T D

AT

E:

C O

N

TR

AC

T

N O

PL

O

TT

ED

B Y:

US Army Corps of Engineers

New York District

D

ES

C R

IP

TI

O N

M

AR

K

AP

PR

D

AT

E M

AR

K

D

ES

C R

IP

TI

O N

D

AT

E

AP

PR

D

2 3

C

4 5

A

B

0 1"

THIS BAR IS ONE INCH ON

ORIGINAL DRAWING

IF NOT ONE INCH ON THIS

SHEET, ADJUST SCALES

ACCORDINGLY

xx xx c-xx x.

dg n

C :\U se rs

\d ap

\D oc um en ts \0

_A rc h_ da vi da pa lm er .rv t9/

/2

:0 5:

A

M

9/

/2

:0 5:

A

M

A-601

PA

R

TI

TI

O N

T

YP

ES

, D

O O

R S

C H

ED

U

LE

G

LA

ZI

N

G E

LE

VA

TI

O

N S, D O

O R

T

YP

ES

A

N D

FI

N

IS

H

S C

H E

D U

LE

O

AE

O

AE

JM

I

O

AE

ROOM FINISH SCHEDULE

ROOM

NO. ROOM NAME FLOOR FINISH

BASE

FINISH

WALL FINISHES CEILING

FINISH

CEILING

HEIGHT KEY NOTESNORTH SOUTH EAST WEST

001 MAINTENANCE BAY FRF1 FRF1 PT4 PT4 PT4 PT4 EXPOSED/PT4 VARIES

100 VEST CPT2 RB1 PT1 PT1 PT1 PT1 ACT1 8'-0"

101 MUNITIONS CTRL CPT1 RB1 PT1 PT1 PT1 PT1 ACT1 8'-0"

102 CTRL NCOIC CPT1 RB1 PT1 PT1 PT1 PT1 ACT1 8'-0"

103 FLIGHT CHIEF CPT1 RB1 PT1 PT1 PT1 PT1 ACT1 8'-0"

104 CORRIDOR PFT1 PB1 PT1 PT1 PT1 PT1 ACT1 8'-0"

105 BREAK PFT1 PB1 PT1 PT1 PT1 PT1 ACT1 8'-0"

106 SHOWER PFT1 PB1 PWT1/PT1 PWT1/PT1 PWT1/PT1 PWT1/PT1 GWB/PT4 8'-0" 1

107 UNISEX PFT1 PB1 PWT1/PT1 PWT1/PT1 PWT1/PT1 PWT1/PT1 GWB/PT4 8'-0" 1

108 STORAGE PFT1 RB1 PT1 PT1 PT1 PT1 ACT1 8'-0"

109 COMM SC RB1 PT1 PT1 PT1 PT1 EXPOSED/PT4 VARIES

110 ELEC SC RB1 PT1 PT1 PT1 PT1 EXPOSED/PT4 VARIES

111 MECH SC RB1 PT1 PT1 PT1 PT1 EXPOSED/PT4 VARIES

112 JAN PFT1 PB1 PT1 PT1 PT1 PT1 GWB/PT4 8'-0"

113 OFFICE CPT1 RB1 PT1 PT1 PT1 PT1 ACT1 8'-0"

114 NCOIC OPS CPT1 RB1 PT1 PT1 PT1 PT1 ACT1 8'-0"

115 INVENTORY CTRL OPS CPT1 RB1 PT1 PT1 PT1 PT1 ACT1 8'-0"

116 CONF CPT1 RB1 PT1 PT1 PT1 PT1 ACT1 8'-0"

117 CORRIDOR PFT1 PB1 PT1 PT1 PT1 PT1 ACT1 8'-0"

SCALE:NTS

DOOR TYPES LEGEND

DOOR SCHEDULE

MARK

DOOR

FIRE

RATING

DOOR FRAME

HDW

RSET NOTES

SIZE DOOR

TYPE MATL TYPE MATL

DETAIL

WD HGT THK HEAD JAMB SILL

001A 3'-0" 7'-0" 1 3/4" SFX STEEL S4 STEEL D3/A-502 B3/A-502 A3/A-502 7 C

001B 16'-0" 10'-0" 2" SDX STEEL -- STEEL A3/A-501 B5/A-501 A5/A-501 1 A

001C 16'-0" 10'-0" 2" SDX STEEL -- STEEL A3/A-501 B5/A-501 A5/A-501 1 A

001D 3'-0" 7'-0" 1 3/4" SFX STEEL S4 STEEL D3/A-502 B3/A-502 A3/A-502 7 C

100A 3'-0" 7'-0" 1 3/4" SFX STEEL S4 STEEL D1/A-502 B1/A-502 A5/A-502 7

100B 3'-0" 7'-0" 1 3/4" WGI WOOD S2 STEEL A1/A-502 A2/A-502 -- 10 C

101A 3'-0" 7'-0" 1 3/4" WFI 45 WOOD S2 STEEL A1/A-502 A2/A-502 -- 4 C

101B 4'-0" 4'-10" 3/4" RFSD 45 STEEL A1/A-503 A2/A-503 A3/A-503 8 B

102A 3'-0" 7'-0" 1 3/4" WFI WOOD S2 STEEL A1/A-502 A2/A-502 -- 2

103A 3'-0" 7'-0" 1 3/4" WFI WOOD S2 STEEL A1/A-502 A2/A-502 -- 2 C

103B 3'-0" 7'-0" 1 3/4" WFI 45 WOOD S2 STEEL A1/A-502 A2/A-502 -- 4

104A 3'-0" 7'-0" 1 3/4" SFX STEEL S4 STEEL D1/A-502 B1/A-502 A5/A-502 9

106A 3'-0" 7'-0" 1 3/4" WFI 45 WOOD S2 STEEL A1/A-502 A2/A-502 -- 3

107A 3'-0" 7'-0" 1 3/4" WFI 45 WOOD S2 STEEL A1/A-502 A2/A-502 -- 3

108A 3'-0" 7'-0" 1 3/4" WFI 45 WOOD S2 STEEL A1/A-502 A2/A-502 -- 5

109A 3'-0" 7'-0" 1 3/4" SFX STEEL S4 STEEL D5/A-502 B5/A-502 A5/A-502 6

110A 3'-0" 7'-0" 1 3/4" SFX STEEL S4 STEEL D5/A-502 B5/A-502 A5/A-502 6

111A 3'-0" 7'-0" 1 3/4" SFX STEEL S4 STEEL D5/A-502 B5/A-502 A5/A-502 6

112A 3'-0" 7'-0" 1 3/4" WFI 45 WOOD S2 STEEL A1/A-502 A2/A-502 -- 2

113A 3'-0" 7'-0" 1 3/4" WFI 45 WOOD S2 STEEL A1/A-502 A2/A-502 -- 2

114A 3'-0" 7'-0" 1 3/4" WFI WOOD S2 STEEL A1/A-502 A2/A-502 -- 2

115A 3'-0" 7'-0" 1 3/4" WFI 45 WOOD S2 STEEL A1/A-502 A2/A-502 -- 2

116A 3'-0" 7'-0" 1 3/4" WFI 45 WOOD S2 STEEL A1/A-502 A2/A-502 -- 2

SCALE: NTS

FRAME TYPES LEGEND

SCALE: NTS

GLAZING ELEVATIONS

SCALE: NTS

B2 PARTITION TYPES

A1 A2

B5

ROOM FINISH SCHEDULE KEYED NOTES:

1. INSTALL PWT1 WAINSCOT TO 4'-4" A.F.F. AND FINISH WITH 4"X12"

BULLNOSE TILE AT TOP WITH PT1 PAINT ABOVE.

GENERAL ROOM FINISH SCHEDULE NOTES:

A. REFER COLOR SCHEDULE 090690 FOR FINISH CODE DESIGNATIONS.

B. ALL HOLLOW METAL DOOR FRAMES ARE TO BE PAINTED PT2.

C. ALL STEEL DOORS ARE TO BE PAINTED PT3.

D. ALL WOOD DOORS ARE TO BE WD1.

DOOR SCHEDULE NOTES:

A. INSULATED SECTIONAL OVERHEAD DOOR - PROVIDE HIGH-LIFT DOOR TRACK SYSTEM

B. PROVIDE AUTO-CLOSING DEVICE

C. ELECTRONIC ACCESS CONTROL REQUIRED

106 108

105 107

103 102

117 115

114113

111110109

AA

BB

1.09

1.02 1.01

1.081.07

1.06

1.05

1.10

1.12

1.111.14

1.17

1.16

1.15

1.19

1.201.21

1.13

1.04

1.18

1.03

M2

M2

M1

M1

MBMB

MAMA

2.01 2.06

2.052.02

2.03 2.04

B roa dw ay

E xte ns ion

, S uit e 5

Ok lah om a C ity , O

K

8-

5.8

.29

| f sb -a e.c om

SHEET

REFERENCE

NUMBER

FY

M U

N

IT

IO

N

S

ST

O R

AG

E

AR

EA

Jo in t B as e M cG ui re -D ix -L ak eh ur st

, N ew

J er se y

M

AY

N

YD

A

/E B

O R

D

ER

FI

LE

N

AM

E:

Su bm itt ed b y:

Pl ot D at e:

FS

B

AN

SI

D

U . S

. A

RM

Y

EN

G

IN

EE

R

D

IS

TR

IC

T N

EW

Y

O R

K ht tp w w w .n an .u sa ce

.a rm y.

m il

FS

B

SE

PT

EM

BE

R

7, SO

LI

C

IT

AT

IO

N N

O

FI

LE

N

AM

E:

D W

N B

Y:

C

KD

B

Y:

D

ES

IG

N

ED

B

Y:

D

AT

E:

SI

ZE

SU

BM

IT

TE

D B

Y:

PL

O

T D

AT

E:

C O

N

TR

AC

T

N O

PL

O

TT

ED

B Y:

US Army Corps of Engineers

New York District

D

ES

C R

IP

TI

O N

M

AR

K

AP

PR

D

AT

E M

AR

K

D

ES

C R

IP

TI

O N

D

AT

E

AP

PR

D

2 3

C

4 5

A

B

0 1"

THIS BAR IS ONE INCH ON

ORIGINAL DRAWING

IF NOT ONE INCH ON THIS

SHEET, ADJUST SCALES

ACCORDINGLY

xx xx c-xx x.

dg n

C :\U se rs

\d ap

\D oc um en ts \0

_A rc h_ da vi da pa lm er .rv t9/

/2

:0 5:

A

M

9/

/2

:0 5:

A

M

A-602

SI

G

N

AG

E

PL

AN

A

N D

S C

H

ED

U

LE

O

AE

O

AE

JM

I

O

AE

SCALE: 1/8" = 1'-0"

A1

ADMIN -

SIGNAGE PLAN

SCALE: 3/16" = 1'-0"

A3

MAINTENANCE BAY -

SIGNAGE PLAN

ROOM NAME SCHEDULE

ROOM NO. ROOM NAME

100 VEST

101 MUNITIONS CTRL

102 CTRL NCOIC

103 FLIGHT CHIEF

104 CORRIDOR

105 BREAK

106 SHOWER

107 UNISEX

108 STORAGE

109 COMM

110 ELEC

111 MECH

112 JAN

113 OFFICE

114 NCOIC OPS

115 INVENTORY CTRL OPS

116 CONF

117 CORRIDOR

GENERAL NOTES

1. REFER TO SHEET A-603 FOR ELEVATIONS OF

SIGNAGE TYPES AND MOUNTING LOCATIONS.

N

0 4' 8' 16'

1/8" = 1'-0"

4' 12'8'0

3/16" = 1'-0"

SIGNAGE SCHEDULE

MARK

SIGNAGE

TYPE MESSAGE COMMENT

1.01 B5 <VERIFY> VERIFY TEXT WITH CONTRACTING OFFICER

1.02 E2-A NO SMOKING

1.03 BB3-EXIT EXIT

1.04 BB3-EXIT EXIT

1.05 BB2 101 / MUNITIONS CONTROL VERIFY ROOM NAME/NUMBER W/ CONTRACTING OFFICER

1.06 BB2 116 / CONFERENCE ROOM VERIFY ROOM NAME/NUMBER W/ CONTRACTING OFFICER

1.07 BB3 103 / FLIGHT CHIEF VERIFY ROOM NAME/NUMBER W/ CONTRACTING OFFICER

1.08 BB3 102 / CONTROL NCOIC VERIFY ROOM NAME/NUMBER W/ CONTRACTING OFFICER

1.09 BB4 114 / NCOIC OPS VERIFY ROOM NAME/NUMBER W/ CONTRACTING OFFICER

1.10 BB2 115 / INVENTORY CONTROL OPERATIONS VERIFY ROOM NAME/NUMBER W/ CONTRACTING OFFICER

1.11 BB3 113 / OFFICE VERIFY ROOM NAME/NUMBER W/ CONTRACTING OFFICER

1.12 BB4 112 / JANITOR VERIFY ROOM NAME/NUMBER W/ CONTRACTING OFFICER

1.13 E2 AUTHORIZED PERSONNEL ONLY / CALL XXX-XXXX FOR ACCESS VERIFY PHONE NUMBER W/ CONTRACTING OFFICER

1.14 BB2 103 / FLIGHT CHIEF VERIFY ROOM NAME/NUMBER W/ CONTRACTING OFFICER

1.15 BB7 107 / UNISEX

1.16 BB4 108 / STORAGE VERIFY ROOM NAME/NUMBER W/ CONTRACTING OFFICER

1.17 BB3 106 / SHOWER

1.18 BB3-EXIT EXIT

1.19 E2 AUTHORIZED PERSONNEL ONLY / CALL XXX-XXXX FOR ACCESS VERIFY PHONE NUMBER W/ CONTRACTING OFFICER

1.20 E2 AUTHORIZED PERSONNEL ONLY / CALL XXX-XXXX FOR ACCESS VERIFY PHONE NUMBER W/ CONTRACTING OFFICER

1.21 E2 AUTHORIZED PERSONNEL ONLY / CALL XXX-XXXX FOR ACCESS VERIFY PHONE NUMBER W/ CONTRACTING OFFICER

2.01 E2 AUTHORIZED PERSONNEL ONLY / CALL XXX-XXXX FOR ACCESS VERIFY PHONE NUMBER W/ CONTRACTING OFFICER

2.02 E2-A NO SMOKING

2.03 B5 XXX VERIFY BUILDING NUMBER W/ CONTRACTING OFFICER

2.04 B5 XXX VERIFY BUILDING NUMBER W/ CONTRACTING OFFICER

2.05 E2-A NO SMOKING

2.06 E2 AUTHORIZED PERSONNEL ONLY / CALL XXX-XXXX FOR ACCESS VERIFY PHONE NUMBER W/ CONTRACTING OFFICER

3"

TA

C

TI

LE

C H

AR

AC

TE

R

5' -0

" M

AX

T O

H

IG

H

ES

T

9"

5' -0

3"

TA

C

TI

LE

C H

AR

AC

TE

R

5' -0

" M

AX

T O

H

IG

H

ES

T

3"

TA

C

TI

LE

C H

AR

AC

TE

R

5' -0

" M

AX

T O

H

IG

H

ES

T

3"

TA

C

TI

LE

C H

AR

AC

TE

R

5' -0

" M

AX

T O

H

IG

H

ES

T 5'

-0

EQ EQ

1'-0"

6"

Civilan Personnel

2" 4"

1/4" 1/4" 11" 1/4" 1/4"

BACKGROUND2" HELVETICA MEDIUM

RAISED 1/32" MIN.

5/8" HELVETICA NEUE -

55 ROMAN

RAISED 1/32" MIN.BRAILLE

1/ 2"

1/ 2"

1/ 2"

3/ 4"

1/ 2"1/ 4"

1/ 4"

END CAP

1'-6"

1' -0

TEXT AND BACKGROUNDTO

MATCH BASE STANDARD

1/2" 8" 1/2"

9"

7/

1/ 2"

3" 230

1/ 2"

1 1/2" HELVETICA NEUE -

65 MEDIUM

RAISED 1/32" MIN.

BRAILLE

END CAP

BACKGROUND

9"

9"

1/

2"

1/ 2" 231

ROOM NAME

1/ 2"

3/ 4"

1/

2" 1/

2"

1 1/2" HELVETICA NEUE -

65 MEDIUM

RAISED 1/32" MIN.

1/2" HELVETICA NEUE -

55 ROMAN

RAISED 1/32" MIN.

BRAILLE

ROOM NAME

END CAP

BACKGROUND

RESTROOM

9"

1" 3/

4" 3/

4" 6"

1/ 2"

1/4" 1/4" 5" 1/4" 1/4"

6"

3/4" HELVETICA NEUE -

55 ROMAN

RAISED 1/32" MIN.

WHITE

PICTOGRAPH

BRAILLE

END CAP

BACKGROUND

1' -0

9"

No Smoking

BACKGROUND - BLACK

PICTOGRAPH - WHITE

1" HELVETICA NEUE - 65

MEDIUM

BACKGROUND

3/4" 1'-1 1/2" 3/4" 1'-3"

3/ 4"

1/

2"

1' -3

3/ 4"

1/

2" 1/

2"

6" 9"

1/ 2"

3/ 4"

1"

1/4" 1/4"

3/4" 1'-2 1/2" 3/4"

1'-4"

1/

2"

1/ 2"

3/ 4"

1/

2" 3"

1/

2" 3/

4"

1/ 2"

3/ 4"

1/

2"

3/ 4"

1' -4

AUTHORIZED

PERSONNEL

ONLY

CALL XXX-XXXX

FOR ACCESS

1 1/2" HELVETICA

NEUE - 65 MEDIUM

BACKGROUND

5' -0

3"

1/2" 8" 1/2"

9"

7/

1/ 2"

3" EXIT

1/

2"

1 1/2" HELVETICA NEUE -

65 MEDIUM

RAISED 1/32" MIN.

BRAILLE

END CAP

BACKGROUND

B roa dw ay

E xte ns ion

, S uit e 5

Ok lah om a C ity , O

K

8-

5.8

.29

| f sb -a e.c om

SHEET

REFERENCE

NUMBER

FY

M U

N

IT

IO

N

S

ST

O R

AG

E

AR

EA

Jo in t B as e M cG ui re -D ix -L ak eh ur st

, N ew

J er se y

M

AY

N

YD

A

/E B

O R

D

ER

FI

LE

N

AM

E:

Su bm itt ed b y:

Pl ot D at e:

FS

B

AN

SI

D

U . S

. A

RM

Y

EN

G

IN

EE

R

D

IS

TR

IC

T N

EW

Y

O R

K ht tp w w w .n an .u sa ce

.a rm y.

m il

FS

B

SE

PT

EM

BE

R

7, SO

LI

C

IT

AT

IO

N N

O

FI

LE

N

AM

E:

D W

N B

Y:

C

KD

B

Y:

D

ES

IG

N

ED

B

Y:

D

AT

E:

SI

ZE

SU

BM

IT

TE

D B

Y:

PL

O

T D

AT

E:

C O

N

TR

AC

T

N O

PL

O

TT

ED

B Y:

US Army Corps of Engineers

New York District

D

ES

C R

IP

TI

O N

M

AR

K

AP

PR

D

AT

E M

AR

K

D

ES

C R

IP

TI

O N

D

AT

E

AP

PR

D

2 3

C

4 5

A

B

0 1"

THIS BAR IS ONE INCH ON

ORIGINAL DRAWING

IF NOT ONE INCH ON THIS

SHEET, ADJUST SCALES

ACCORDINGLY

xx xx c-xx x.

dg n

C :\U se rs

\d ap

\D oc um en ts \0

_A rc h_ da vi da pa lm er .rv t9/

/2

:0 5:

A

M

9/

/2

:0 5:

A

M

A-603

SI

G

N

AG

E

EL

EV

AT

IO

N

S

O

AE

O

AE

JM

I

O

AE

SCALE: NTS

D4 MOUNTING BB3

SCALE: NTS

C2 SIGN MOUNTING B5

SCALE:NTS

D5 MOUNTING BB4

SCALE:NTS

D3 MOUNTING BB2

SCALE: NTS

C1 MOUNTING BB7

SCALE: NTS

D1 MOUNTING E2

SCALE: 3" = 1'-0"

B1

INTERIOR TYPE BB3

LAYOUT

SCALE: 3" = 1'-0"

A3 EXTERIOR TYPE B5 LAYOUT

SCALE: 3" = 1'-0"

B2

INTERIOR TYPE BB4

LAYOUT

SCALE: 3" = 1'-0"

C5

INTERIOR TYPE BB2

LAYOUT

SCALE: 3" = 1'-0"

A2

INTERIOR TYPE BB7

LAYOUT

SCALE: 3" = 1'-0"

C4

EXTERIOR TYPE E2-A

LAYOUT

SCALE: 3" = 1'-0"

A4 SIGN TYPE DETAIL

SCALE: 3" = 1'-0"

C3 EXTERIOR TYPE E2 LAYOUT

GENERAL NOTES

1. CONTRACTOR SHALL VERIFY ALL SIGNAGE

REQUIREMENTS (SIZE, STYLE, TEXT, ROOM

NUMBERS ETC.) WITH GOVERNMENT PRIOR TO

PROCUREMENT AND COORDINATE FINAL

LOCATIONS WITH GOVERNMENT PRIOR TO

INSTALLATION. ROOM NAMES AND NUMBERS MUST

BE VERIFIED BY USER PRIOR TO ORDERING.

2. ROOM NUMBERS IN SCHEDULE MAY NOT BE

ACTUAL ROOM NUMBERS FOR SIGNAGE.

3. REFER TO 09 06 90 COLOR SCHEDULE FOR

INTERIOR AND EXTERIOR SIGNAGE FINISHES.

SCALE: NTS

D2 MOUNTING E2-A

3" 9"6"0

3" = 1'-0"

SCALE: 3" = 1'-0"

B3

INTERIOR TYPE BB4-EXIT

LAYOUT

B2

A1

B2

A-401D2

D4

BREAK

BB

SIGNAGE

SHOWER

106A

6" 8'-1 3/4"

9' -1

/4

5'

-3

/4

6"

A3

A2

B1

A4

B18' -1

/8

3' -1

3/

4"

UNISEX

JAN

112A

8'-0" 5'-11"

107A

A-401

A41

3 14

1'-6"

2'-0" 4'-1" 1'-6"

B2

B1

B3

B2

B1

D1 A-401

SIM

C1 A-401

SIMA1

A-401

SIM

CABINET FRONTS,

(PLAM1)

COUNTER AND

SPLASH,

(SSM1)

CABINET FRONTS,

(PLAM1)

1'-6" 3'-0" 1'-6" 2'-1"

8'-1"

2' -1

0" 1"

1' -7

2'

-6

1' -0

1'-6" 3'-0" 2'-6" 1'-1"

1' -3

UNDER CABINET

LIGHT

REFRIGERATOR

(NIC)

D1 A-401

SIM

C1 A-401

SIM

7'-8 3/4"

CABINET FRONTS,

(PLAM1)

COUNTER AND

SPLASH, (SSM1)

CABINET

FRONTS, (PLAM1)

3'-3 3/4"2'-4"2'-1"

1' -0

2'

-6

1' -7

1"

2' -1

0"

1'-1" 3'-4"

2' -4

1/ 2"

1/

2"

COUNTERTOP &

BACKSPLASH ON

3/4" PLYWD SUBTOP

SCHEDULED

BASE

BLOCKING

PLAM1 APRON

FRONT

SCHEDULED

SINK

3/4" PLYWD

REMOVABLE ADA

FRENCH CLEAT

PANEL (PLAM1,

HARDWD EDGES)

EASED

EDGE

1'-2" 3"

8"

9"

1"

2'-0" 1"

2' -1

0"

1'-8" 4"

2' -1

0"

4" 1'

-1

3/ 4"

1/ 4"

1/

4"

1/ 4"

1/

2"

COUNTERTOP &

BACKSPLASH ON

3/4" PLYWD SUBTOP

SCHEDULED

BASE

CABINET

DOOR (PLAM)

DRAWER

FRONT (PLAM)

ADJUSTABLE

SHELF

PULL

PULL

1" EASED

EDGE

2'-1"

SCHEDULED

PARTITION

1/4" PLYWD

BACK (PLAM)

2X BLOCKING

CABINET DOOR

(PLAM)

ADJUSTABLE

SHELF (PLAM)

(1 '-3

" W H

ER

E

SH

O

W N

2' -6

DOOR PULL

UNDERCABINET

LIGHT, RE: ELEC

BOTTOM (PLAM)

1/

2"

SCHEDULED

PARTITION

1/4" PLYWD

BACK (PLAM)

1X BLOCKING

FINISH FLOOR

100'-0"

2' -1

0"

3' -3

3'

-0

1' -9

2'-0"

4' -4

PAINT WALL,

(PT1)

PORCELAIN

TILE, (PWT1)

PORCELAIN TILE

TRIM, 4" X 12"

BULLNOSE

PORCELAIN

TILE COVE

BASE, (PB1)

B roa dw ay

E xte ns ion

, S uit e 5

Ok lah om a C ity , O

K

8-

5.8

.29

| f sb -a e.c om

SHEET

REFERENCE

NUMBER

FY

M U

N

IT

IO

N

S

ST

O R

AG

E

AR

EA

Jo in t B as e M cG ui re -D ix -L ak eh ur st

, N ew

J er se y

M

AY

N

YD

A

/E B

O R

D

ER

FI

LE

N

AM

E:

Su bm itt ed b y:

Pl ot D at e:

FS

B

AN

SI

D

U . S

. A

RM

Y

EN

G

IN

EE

R

D

IS

TR

IC

T N

EW

Y

O R

K ht tp w w w .n an .u sa ce

.a rm y.

m il

FS

B

SE

PT

EM

BE

R

7, SO

LI

C

IT

AT

IO

N N

O

FI

LE

N

AM

E:

D W

N B

Y:

C

KD

B

Y:

D

ES

IG

N

ED

B

Y:

D

AT

E:

SI

ZE

SU

BM

IT

TE

D B

Y:

PL

O

T D

AT

E:

C O

N

TR

AC

T

N O

PL

O

TT

ED

B Y:

US Army Corps of Engineers

New York District

D

ES

C R

IP

TI

O N

M

AR

K

AP

PR

D

AT

E M

AR

K

D

ES

C R

IP

TI

O N

D

AT

E

AP

PR

D

2 3

C

4 5

A

B

0 1"

THIS BAR IS ONE INCH ON

ORIGINAL DRAWING

IF NOT ONE INCH ON THIS

SHEET, ADJUST SCALES

ACCORDINGLY

xx xx c-xx x.

dg n

C :\U se rs

\d ap

\D oc um en ts \0

_A rc h_ da vi da pa lm er .rv t9/

/2

:0 5:

A

M

9/

/2

:0 5:

A

M

A-401

EN

LA

R G

ED

P

LA

N

S, T

O

IL

ET

E

LE

VA

TI

O

N S

AN

D

M

IL

LW

O

R K

EL

EV

AT

IO

N S

O

AE

O

AE

JM

I

O

AE

SCALE: 1/2" = 1'-0"

B2

BREAK/SHOWER -

ENLARGED PLAN

SCALE: 1/2" = 1'-0"

B5 ADMIN - ENLARGED PLAN

SCALE: 1/2" = 1'-0"

D2 INTERIOR ELEVATION

SCALE: 1/2" = 1'-0"

D4 INTERIOR ELEVATION

SCALE: 1 1/2" = 1'-0"

A1 MILLWORK SECTION

SCALE: 1 1/2" = 1'-0"

C1 MILLWORK SECTION

SCALE: 1 1/2" = 1'-0"

D1 MILLWORK SECTION

N

SHEET KEYNOTES

1. FLOOR DRAIN.

2. SURFACE MOUNTED PAPER DISPENSER.

3. ADA WATER CLOSET.

4. ADA URINAL.

5. DRINKING FOUNTAINS.

6. TOILET TISSUE DISPENSER.

7. SEAT COVER DISPENSER.

8. 36" GRAB BAR.

9. 42"GRAB BAR.

10. SCHEDULED SINK AND FAUCET.

11. 24"x36" MIRROR.

12. MOP SINK.

13. 36" MIN - 4 HOOK MOP AND BROOM HOLDER.

14. SANITARY NAPKIN DISPOSER.

15. SURFACE MOUNTED SOAP DISPENSER.

16. ROLL-IN SHOWER INSERT.

17. TOWEL HOOK.

18. REFRIGERATOR (NIC)

19. SCHEDULED SINK, FAUCET AND BUBBLER.

20. INSULATED PIPE COVER.

21. COUNTER (SSM1).

22. SHOWER ROD AND CURTAIN.

6" 1'-6"1'0

1 1/2" = 1'-0"

0 1' 2' 4'

1/2" = 1'-0"

SCALE: 1/2" = 1'-0"

A4 INTERIOR ELEVATION

GENERAL NOTES

A. ALL INTERIOR DIMENSIONS ARE TO THE FACE OF

STUD OR FACE OF CMU AS INDICATED - UNLESS

NOTED OTHERWISE.

B. REFER B2/A-601 FOR PARTITION TYPES

EXTERIOR FINISHES

C 1: Precast ConcreteS

SSMR1: Standing Seam Metal Roof Paint: Exterior Steel Doors and Door Frames, Downspouts, Gutters, Louvers and Flashings

E 1: Exterior Insulation and Finish System, SoffitsF

FY21 Munitions Storage Area

EXTERIOR FINISHES

B 1: Exterior BrickR

FY21 Munitions Storage Area

FINISH FLOOR

100'-0"

ADMIN. TRUSS

BEARING

110'-0"

2' -8

1/

4"6' -0

" 10

/4

LOUVER TO MATCH ROOF

(SSSR1) STEEL STANDING

SEAM ROOF

PREFIN METAL 5X5

GUTTER

ARCHITECTURAL

PRECAST BAND

ARCHITECTURAL

PRECAST BAND

BRICKCJ

STEEL

DOOR

2 1

HOSE BIB

4x4 PREFIN METAL

DOWNSPOUT

PREFIN METAL

FLASHING

2'-4 1/2"2'-4 1/2"

C3 A-301

C3 A-301

SNOW GUARDS

PREFIN METAL

RIDGE CAP

PREFIN METAL RAKE

FLASHING

VENT THROUGH ROOF

CJ

CJ

CJ

FALL PROTECTION

SYSTEM

5" / 1'-0" 5" / 1'-0"

MECHANICAL

LOUVER

DOWNSPOUT

CONNECTED TO

STORM DRAIN

SECURITY

CAMERA

LIGHT FIXTURE

LIGHT FIXTURE

PROVIDE L5X3X1/4" (GALV., LLH)

AT HEAD OF LOUVERS (4

LOCATIONS). ATTACH TO COLD-

FORMED BOX HEADER SIMILAR

TO DETAIL D1/A-502

FINISH FLOOR

100'-0"

ADMIN. TRUSS

BEARING

110'-0"

A3 A-301

A3 A-301

B3 A-303

/4

6' -0

1/

4"

2' -8

(SSSR1) STEEL

STANDING SEAM

ROOF

PREFIN METAL 5X5

GUTTER

ARCHITECTURAL

PRECAST BAND

BRICK

ARCHITECTURAL

PRECAST PANEL

WITH 3/8" RAKE

REVEAL, TYPICAL

REFER B1/A-503

A B

4x4 PREFIN METAL

DOWNSPOUT

PREFIN METAL

RIDGE CAP PREFIN METAL

RIDGE CAP

SNOW GUARDS

4x4 PREFIN METAL

DOWNSPOUT

BRICKDOWNSPOUT

CONNECTED TO

STORM DRAIN

CJ CJ

PREFIN METAL RAKE

FLASHING

FALL PROTECTION

SYSTEM

5" / 1'-0" 5" / 1'-0"

SECURITY CAMERA

FINISH FLOOR

100'-0"

ADMIN. TRUSS

BEARING

110'-0"

LOUVER TO MATCH ROOF

(SSSR1) STEEL STANDING

SEAM ROOF

PREFIN METAL 5X5

GUTTER

ARCHITECTURAL

PRECAST BAND

ARCHITECTURAL

PRECAST BAND

BRICK

BRICK

ARCHITECTURAL

PRECAST PANEL

WITH 3/8" RAKE

REVEAL, TYPICAL

REFER B1/A-503

4x4 PREFIN METAL

DOWNSPOUT

HOSE BIB

/4

6' -0

1/

4"

2' -8

C3 A-301

C3 A-301

PREFIN METAL RAKE

FLASHING

SNOW GUARDS

PREFIN METAL

RIDGE CAP

4x4 PREFIN METAL

DOWNSPOUT

CONNECTED TO

STORM DRAIN

VENT THROUGH

ROOF

STEEL DOOR

AND FRAME

CJCJ CJ CJ

FALL PROTECTION

SYSTEM

5" / 1'-0" 5" / 1'-0"

RECESSED

KNOX BOX

4' -0

8"

FIRE ALARM

SPEAKER

SECURITY

CAMERA

ANTENNA

FINISH FLOOR

100'-0"

ADMIN. TRUSS

BEARING

110'-0"

A3 A-301

A3 A-301

(SSSR1) STEEL

STANDING SEAM ROOF

PREFIN METAL 5X5

GUTTER

/4

6' -0

1/

4"

2' -8

ARCHITECTURAL

PRECAST PANEL WITH

3/8" RAKE REVEAL,

TYPICAL REFER B1/A-503

BRICK

ARCHITECTURAL

PRECAST BAND

STEEL DOOR

AND FRAME

AB

4x4 PREFIN METAL

DOWNSPOUT

PREFIN METAL

RIDGE CAP

SNOW GUARDS

4x4 PREFIN METAL

DOWNSPOUT

CONNECTED TO

STORM DRAIN

VENT THROUGH ROOF

CJCJ CJ

BRICK

PREFIN METAL RAKE

FLASHING

FALL PROTECTION

SYSTEM

5" / 1'-0" 5" / 1'-0"

SECURITY

CAMERA

FIRE ALARM

SPEAKER

B roa dw ay

E xte ns ion

, S uit e 5

Ok lah om a C ity , O

K

8-

5.8

.29

| f sb -a e.c om

SHEET

REFERENCE

NUMBER

FY

M U

N

IT

IO

N

S

ST

O R

AG

E

AR

EA

Jo in t B as e M cG ui re -D ix -L ak eh ur st

, N ew

J er se y

M

AY

N

YD

A

/E B

O R

D

ER

FI

LE

N

AM

E:

Su bm itt ed b y:

Pl ot D at e:

FS

B

AN

SI

D

U . S

. A

RM

Y

EN

G

IN

EE

R

D

IS

TR

IC

T N

EW

Y

O R

K ht tp w w w .n an .u sa ce

.a rm y.

m il

FS

B

SE

PT

EM

BE

R

7, SO

LI

C

IT

AT

IO

N N

O

FI

LE

N

AM

E:

D W

N B

Y:

C

KD

B

Y:

D

ES

IG

N

ED

B

Y:

D

AT

E:

SI

ZE

SU

BM

IT

TE

D B

Y:

PL

O

T D

AT

E:

C O

N

TR

AC

T

N O

PL

O

TT

ED

B Y:

US Army Corps of Engineers

New York District

D

ES

C R

IP

TI

O N

M

AR

K

AP

PR

D

AT

E M

AR

K

D

ES

C R

IP

TI

O N

D

AT

E

AP

PR

D

2 3

C

4 5

A

B

0 1"

THIS BAR IS ONE INCH ON

ORIGINAL DRAWING

IF NOT ONE INCH ON THIS

SHEET, ADJUST SCALES

ACCORDINGLY

xx xx c-xx x.

dg n

C :\U se rs

\d ap

\D oc um en ts \0

_A rc h_ da vi da pa lm er .rv t9/

/2

:0 5:

A

M

9/

/2

:0 5:

A

M

A-201

AD

M

IN

IS

TR

AT

IO

N

BU

IL

D

IN

G

E

LE

VA

TI

O N

S

O

AE

O

AE

JM

I

O

AE

SCALE: 3/16" = 1'-0"

C1 ADMIN - NORTH ELEVATION

SCALE: 3/16" = 1'-0"

C4 ADMIN - EAST ELEVATION

SCALE: 3/16" = 1'-0"

A1 ADMIN - SOUTH ELEVATION

SCALE: 3/16" = 1'-0"

A4 ADMIN - WEST ELEVATION

4' 12'8'0

3/16" = 1'-0"

111110109108106

105 107

114113

AA

BB

TB1

CH2

CH1

DK2

CH1

CH1

C H

C H

CR1

FL

FL

CL1

BB1 BB1 BB1

MB

EQ2

SH1

EQ3

SH1

SH

CH1CH1

CH1 CH1

C H

CR1

QTY: 8

W R

R

R

1 WR1

RR1

WR1

RR1

W R

R

R

TV1

W R

R

R

W R

R

R

W R

R

R

W R

R

R

WR1

RR1

WR1

RR1

EQ1

WR1

RR1

W S1

L

FL1 FL14'-2" 4'-2"

9' -6

3' -0

EQ EQ

CH1

W R

R

R

W S1

R

WS1R

WS1L WS1R

WS1L

SECURITY

TV

NIC

DK2

DK2DK2

COPIER/

NIC

COPIER/

NIC

W S1

L

CH3

QTY: 5

MB

B roa dw ay

E xte ns ion

, S uit e 5

Ok lah om a C ity , O

K

8-

5.8

.29

| f sb -a e.c om

SHEET

REFERENCE

NUMBER

FY

M U

N

IT

IO

N

S

ST

O R

AG

E

AR

EA

Jo in t B as e M cG ui re -D ix -L ak eh ur st

, N ew

J er se y

M

AY

N

YD

A

/E B

O R

D

ER

FI

LE

N

AM

E:

Su bm itt ed b y:

Pl ot D at e:

FS

B

AN

SI

D

U . S

. A

RM

Y

EN

G

IN

EE

R

D

IS

TR

IC

T N

EW

Y

O R

K ht tp w w w .n an .u sa ce

.a rm y.

m il

FS

B

SE

PT

EM

BE

R

7, SO

LI

C

IT

AT

IO

N N

O

FI

LE

N

AM

E:

D W

N B

Y:

C

KD

B

Y:

D

ES

IG

N

ED

B

Y:

D

AT

E:

SI

ZE

SU

BM

IT

TE

D B

Y:

PL

O

T D

AT

E:

C O

N

TR

AC

T

N O

PL

O

TT

ED

B Y:

US Army Corps of Engineers

New York District

D

ES

C R

IP

TI

O N

M

AR

K

AP

PR

D

AT

E M

AR

K

D

ES

C R

IP

TI

O N

D

AT

E

AP

PR

D

2 3

C

4 5

A

B

0 1"

THIS BAR IS ONE INCH ON

ORIGINAL DRAWING

IF NOT ONE INCH ON THIS

SHEET, ADJUST SCALES

ACCORDINGLY

xx xx c-xx x.

dg n

C :\U se rs

\d ap

\D oc um en ts \0

_A rc h_ da vi da pa lm er .rv t9/

/2

:0 6:

A

M

9/

/2

:0 6:

A

M

A-604

FU

R

N

IT

U R

E

PL

AN

A

N D

S C

H

ED

U

LE

O

AE

O

AE

JM

I

O

AE

N

0 4' 8' 16'

1/8" = 1'-0"

SCALE: 1/8" = 1'-0"

C1 ADMIN - FURNITURE PLAN

FURNITURE SCHEDULE

ITEM CODE DESCRIPTION DIMENSIONS QUANTITY

BB1 ENCLOSED BULLETIN BOARD 48"W x 2.25"D x 36"H 3 CH1 TASK CHAIR 28.5"W x 26"D x 39.25"H 11 CH2 CONFERENCE CHAIR 29"W x 24.6"D x 48"H 8 CH3 MULTI-USE CHAIR 29"W x 24.6"D x 48"H 5 CL1 WORLD CLOCK - 6 ZONES 72"W x 3.25"D x 8.25"H 1 CR1 COAT RACK 36"W x 15"D x 60"H 2 DK2 6x7 L-SHAPE DESK, RIGHT RETURN 72"W x 84"D 4 EQ1 COFFEE BREWER 13.8"W x 7.1"D x 14.3"H 1 EQ2 MICROWAVE 24"W x 21.3"D x 13.8"H 1 EQ3 REFRIGERATOR 36"W x 33.5"D x 69.9"H 1 FL1 FILE CABINET, 5-HIGH 42"W x 18"D x 63"H 4 MB1 MARKER BOARD 48.5"W x 0.375"D x 48.5"H 2 RR1 RECYCLING RECEPTACLE 14.375"W x 10.25"D x 15"H 12 SH1 WIRE SHELVING 36"W x 18"D x 84"H 3 TB1 CONFERENCE TABLE 96"W x 48"D x 29"H 1 TV1 TV MONITOR - 75" 66.5"W x 2.6"D x 38.2"H 1 WR1 WASTE RECEPTACLE 14.375"W x 10.25"D x 15"H 12 WS1L WORKSTATION, LEFT RETURN 72"W x 72"D 4 WS1R WORKSTATION, RIGHT RETURN 72"W x 72"D 3 ROOM NAME SCHEDULE

ROOM NO. ROOM NAME

100 VEST

101 MUNITIONS CTRL

102 CTRL NCOIC

103 FLIGHT CHIEF

104 CORRIDOR

105 BREAK

106 SHOWER

107 UNISEX

108 STORAGE

109 COMM

110 ELEC

111 MECH

112 JAN

113 OFFICE

114 NCOIC OPS

115 INVENTORY CTRL OPS

116 CONF

117 CORRIDOR

GENERAL NOTES

A. FURNITURE IS PROVIDED UNDER A SEPARATE

CONTRACT AND IS SHOWN FOR COORDINATION

PURPOSES ONLY.

B. WORLD CLOCK CL1 TO BE MOUNTED AT 84" AFF TO

CENTER OF CLOCK. CONTRACTOR TO PROVIDE

BLOCKING IN WALL, AS REQUIRED.

C. TELEVISION TV1 IS TO BE MOUNTED AT 72"AFF TO

CENTER OF TELEVISION. CONTRACTOR TO

PROVIDE BLOCKING IN WALL, AS REQUIRED.

D. MARKERBOARD MB1 IS TO BE MOUNTED AT 60" AFF

TO CENTER OF MARKERBOARD.

E. BULLETIN BOARDS BB1 ARE TO BE MOUNTED AT 60"

AFF TO CENTER OF BULLETIN BOARD.

PART 3 EXECUTION Not Applicable