C002 - Delivery Address.pdf
PDF 124 KB Posted
- Attached to
- MDC 3289 Revetment Barges FY25
- Solicitation number
- w912bu25ba004
About this file
This document is a Section C - Descriptions and Specifications for an Invitation for Bid (IFB) issued by the Marine Design Center (MDC) of the U.S. Army Corps of Engineers to acquire four new welded steel revetment barges. The barges will support the Mat Sinking Unit and Vicksburg District's existing fleet, with each barge designed to accommodate two rows of mat stacks (23 on bottom, 22 on top), with each stack comprising 14 squares weighing approximately 3,400 lbs per square.
The contract requires the contractor to submit contract drawings to ABS for class approval, provide engineering services for design and fabrication, fabricate multiple barges according to specifications, test all barge-related equipment, and obtain ABS Class certification. The barges have specific principal characteristics including a length of 160'-0", beam of 36'-0", and depth of 11'-0", with raked bow and stern, and 10' sheer forward and aft. Delivery will be to the Vicksburg Supply Base located 4.5 nautical miles up the Yazoo River, with final acceptance at the Corps' designated location. The barges must be designed and constructed in accordance with the latest edition of rules, regulations, and standards from various legislative and regulatory agencies.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SECTION C - DESCRIPTIONS AND SPECIFICATIONS
SCOPE OF WORK
C000 GENERAL
C001 PROJECT DESCRIPTION
A. SCOPE
The Marine Design Center (MDC) of the U.S. Army Corps of Engineers (USACE) has issued this Invitation for Bid (IFB) to acquire four new welded steel revetment barges. The barges’ primary mission will be to support the Mat Sinking Unit and the Vicksburg District’s existing fleet of revetment barges. The barges will accommodate two rows of mat stacks, 23 on the bottom and 22 on top. Each stack shall comprise 14 squares at approximately 3,400 lbs. per square.
PRINCIPAL CHARACTERISTICS
The principal dimensions of each barge shall be as follows:
• Length (Molded) 160'- 0"
• Beam (Molded) 36'- 0"
• Depth (Molded at Centerline) 11’-0”
• Bow Raked
• Stern Raked
• Sheer Forward 10’ and aft 10’
• Camber None
C002 CONTRACT OVERVIEW
For this contract, the contractor shall include, as a minimum, all costs to provide the following:
• Submit the Government prepared contract drawing package to ABS for class approval.
• Using the contract and reference drawings provided in the procurement package, supply the required engineering services to complete the design for production and fabrication of the barges.
• Fabricate multiple barges in accordance with the specifications of this contract.
• Test all barge related equipment.
• Obtain ABS Class for the barges as stated in Section C004.
• Deliver the completed barges to a designated location:
US Army Corps of Engineers Vicksburg Supply Base - located 4.5 nautical miles up the Yazoo River from the confluence of the Yazoo and Mississippi River, in the slack water Vicksburg Harbor Port of Vicksburg / Vicksburg Harbor - Lower Mississippi River Mile Marker 437.2 Final Acceptance at the Corps’ designated location of the completed revetment barges.
C003 DESIGN STANDARDS
Each barge shall be designed and constructed in accordance with the contract drawings, and the latest edition and interpretations of the rules, regulations, requirements and standards of the Legislation, Regulatory Agencies and technical organizations listed below. The contractor is required to incorporate into the barges any revisions to the rules and regulations listed below as well as those stipulated in the respective specification clauses.
e5ct9dls Sticky Note Completed set by e5ct9dls e5ct9dls Sticky Note Completed set by e5ct9dls
File details come from the government source that posted it. Updated .