E 1710 SERIES.pdf
PDF 9 MB Posted
- Attached to
- Essayons Overhaul FY27
- Solicitation number
- W9127N26BA029
About this file
This document is a comprehensive technical drawing package for the Dredge Essayons, specifically detailing the sliding trunnion body and trunnion ring assembly for dragarms. The drawing set includes 57 sheets of engineering plans with multiple revisions, prepared by the U.S. Army Corps of Engineers.
The package contains detailed mechanical specifications for the trunnion assembly, including dimensioned drawings, sectional views, assembly instructions, and material specifications. Key components detailed include the sliding trunnion body (cast steel construction), trunnion ring, bearing mounts, grease fittings, and associated hardware. The drawings incorporate both English and metric measurements and include tolerance specifications for precision machining operations. Multiple drawing revisions are noted with approval dates ranging from February 1980 through April 1982, with approvals from J.J. Henry, SSY, ACE, and other designated personnel. The assembly includes provisions for grease lubrication through multiple fitting points, detailed bearing retention mechanisms, and specifications for welding procedures using 7018 low-hydrogen rod. Supporting documentation includes fixture layouts for drilling operations, material requirements tables, and service frame/bridge rebuild specifications. The technical package also references swell compensation seal installation procedures with specific measurements for seal stack compression and assembly instructions. This appears to be manufacturing and maintenance documentation for a major dredging vessel component rather than a solicitation or contract document.
View the file
Other files
Show 40 more
Latest 50 of 100 listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
6 3/4 " (170)
1/2 "R (R=12)
2" (50)
1"R (R=25)
2" (50)
2'-9 1/2 " (850)2'-9 1/2 " (850)
1/4 "(6) 1/4 "(6)10" (254)
1/2 " (12)
1/2 " (12)5 3/4 " (146)
11/32 " ( 6)
2" 3 3/4 "
(50) (95) 49.764" (1264 ) 49.843" +2
0 49.764" (1264 ) 49.843" +2
8"
0)
9" R
(R =5
0)
3 3/4 " (95)
2" (50)
See sht
3"
3" (75) 3/4 " (19)
H O
LE
D
IA
(G A T.
3/
D
IA
2)
8 7/8 " (225)
6 11/16 "R (R=170)
(1 0)
D
IA
D
IA
D
IA
.7
.7
1.
0.
.6
.6
0.
D
IA
H
D
IA
0)
2.567" +0.2 2.559" (65 +0 )
1 3/4 " (45)
4'
1/
(1
5)
R R 1)
12" (305)
11.811" +0.2 11.732" (298 )+0 1/4 " (7)
7.244" 7.252"
+0
3.976" 4.055"
+2 +0(101 )
1/2 " (13)
"R R
3) 1/16 "R x
5° (5 x4 5°
125 125
.9
.9
0.
0.
D
IA
(1 6)
D
IA
(1 8)
D
IA
.0
.0
0.
0.
D
IA
B 138 8 3/4 " (220)
4" (1
3'-3 7/8 "R (R=1013)
1/32 " (1)
50°
9 1/2 " (240) 1/2 " (12)
1/
(9 0)
1"
1"(25) 2"(50)
50°
A
1/32 " (1)
50°50°
1"(25) 1"(25)6"(150)
1'
1/
(3
UNC 1"
1"DIA (~25)
11/32 "( 6)
1' 9"
4) 8" (2
7/8 "(22)
1/4 "R(R=6)
2' 5"
7) 4'
3/
(1
5)
A
APPROVED BY J.J. HENRY DATED: 2/27/80
APPROVED BY SSY DATED: 3/27/80
3 1/2 "(92)
1/2 "(12)
3/
(1
1/2 " (12)
7 7/8 " (200)
3/8 "(10)
3/8 "(10)
44 1/4 " DIA (~1125)
DBC 64":12 HOLES ~3 3/4 " EXACTLY ON PITCH
77 3/4 " DIA (1975)
1/
6"(152) 3" (76)
7 3/4 "(197)
1/
"(3 8)
8" (2
1'-9"(534) 1'-9"(534)
1'
(5
133 162 A
TAPHOLES UNC 3/4 " DEEP 1 5/8 " FOR EYEBOLTS
WICH ARE USED DURING MOUNTING
TAPGATEN UNC 3/4 " DIEP 42 VOOR OOGBOUTEN
WELKE GEBRUIKT WORDEN BU MONTAGE
TO MACHINE 2"DIA (VLAKKEN ~50)
AIR CONNECTION UNC 1"
(LUCHTAANSLUITING)
HOLE 0.752" DIA
0.757"
C11 +0.24(GAT ~19 ) +0.11
5/
.7
2.
.7
0.
1 3/4 "(45)
2"(50)
3"(75) 1"(25)
3 1/2 "(90)
D
IA
6" (152)
1' 6"
0)
R
R
/1
"(2
TO MACHINE 3/4 " DIA
(VLAKKEN ~19)
1/4 " NPTF
1/
2"(50)
1/2 "(12)
(3 8)
(3 8)
1/
"R R 6)1' 1"
0)
1/2 "(12)
1/8 "R (R=3)
0.463"DIA(~11.75)
1 1/2 "(38)
1/4 "NPTF
0.463"DIA(~11.75)
3/4 " 3/
(1 9)
7" 7)
3/
(1
2"
2"
D
"R R 3)
D
N P
TF
0.4
D
IA
.75
3 1/2 " (90)
2"
5 3/4 " (146)
2 7/8 " (73)
1 1/4 " (32)1 1/4 " (32)
3/4 " DIA
D
DREDGE ESSAYONS
SLIDING TRUNNION BODY AND
TRUNNION RING FOR DRAGARMS
DRAWN DWG# REV
SCALE SHEET 2 OF 3
T. WARD E-1710-15
ALTERATIONS
NO DESCRIPTION BY DATE APP'D
A
B
C
D
APPROVED ADD POS 162
SEE SHT 1
SEE SHT 1
GREASE HOLES SECTION E E DETAIL IV
PSH
PSH
GK
JS
24-04-80
14-7-80
3-81
4-82
G G
HH
I I
+0.2(184 )
(R=1.5)
SCALE 3"=1'-0"
DETAIL I
SECTION F-F"
DETAIL II
APPROVED BY ACE DATED: 2/27/80 WRSC. MD/2001.0393
(STC 1625:12 GATEN ~95 ZUIVER OP STEEK)
DETAIL IV
SCALE 3"=1'-0"
SCALE 6"=1'-0"
SCALE 6"=1'-0"
SCALE 6"=1'-0"
SCALE 3"=1'-0"SCALE 3"=1'-0"
SECTION G-G"
SCALE 3"=1'-0"
DETAIL III
SECTION B-B"
SECTION I-I"
SECTION H-H""
SECTION E-E""
SECTION C-C" SECTION D-D""""
A
10111213141516
A
B
C
D
E
F
16 15 14 13 12 11 10 9
F
E
D
C
6 3/4 " (170)
1/2 "R (R=12)
2" (50)
1"R (R=25)
2" (50)
2'-9 1/2 " (850)2'-9 1/2 " (850)
1/4 "(6) 1/4 "(6)10" (254)
1/2 " (12)
1/2 " (12)5 3/4 " (146)
11/32 " ( 6)
2" 3 3/4 "
(50) (95) 49.764" (1264 ) 49.843" +2
0 49.764" (1264 ) 49.843" +2
8"
0)
9" R
(R =5
0)
3 3/4 " (95)
2" (50)
See sht
3"
3" (75) 3/4 " (19)
H O
LE
D
IA
(G A T.
3/
D
IA
2)
8 7/8 " (225)
6 11/16 "R (R=170)
(1 0)
D
IA
D
IA
.7
.7
1.
0.
.6
.6
0.
D
IA
D
IA
0)
2.567" +0.2 2.559" (65 +0 )
1 3/4 " (45)
4'
1/
(1
5)
R R 1)
12" (305)
11.811" +0.2 11.732" (298 )+0 1/4 " (7)
7.244" 7.252"
+0
3.976" 4.055"
+2 +0(101 )
1/2 " (13)
"R R
3) 1/16 "R x
5° (5 x4 5°
125 125
.9
.9
0.
0.
D
IA
(1 6)
D
IA
(1 8)
D
IA
.0
.0
0.
0.
D
IA
138 8 3/4 " (220)
4" (1
3'-3 7/8 "R (R=1013)
1/32 " (1)
50°
9 1/2 " (240) 1/2 " (12)
1/
(9 0)
1"
1"(25) 2"(50)
50°
A
1/32 " (1)
50°50°
1"(25) 1"(25)6"(150)
1'
1/
(3
UNC 1"
1"DIA (~25)
11/32 "( 6)
1' 9"
4) 8" (2
7/8 "(22)
1/4 "R(R=6)
2' 5"
7) 4'
3/
(1
5)
A
APPROVED BY J.J. HENRY DATED: 2/27/80
APPROVED BY SSY DATED: 3/27/80
3 1/2 "(92)
1/2 "(12)
3/
(1
1/2 " (12)
7 7/8 " (200)
3/8 "(10)
3/8 "(10)
44 1/4 " DIA (~1125)
DBC 64":12 HOLES ~3 3/4 " EXACTLY ON PITCH
77 3/4 " DIA (1975)
1/
6"(152) 3" (76)
7 3/4 "(197)
1/
"(3
8)
8" (2
1'-9"(534) 1'-9"(534)
1'
(5
133 162 A
TAPHOLES UNC 3/4 " DEEP 1 5/8 " FOR EYEBOLTS
WICH ARE USED DURING MOUNTING
TAPGATEN UNC 3/4 " DIEP 42 VOOR OOGBOUTEN
WELKE GEBRUIKT WORDEN BU MONTAGE
TO MACHINE 2"DIA (VLAKKEN ~50)
AIR CONNECTION UNC 1"
(LUCHTAANSLUITING)
HOLE 0.752" DIA
0.757"
C11 +0.24(GAT ~19 ) +0.11
5/
.7
.7
0.
1 3/4 "(45)
2"(50)
3"(75) 1"(25)
3 1/2 "(90)
D
IA
6" (152)
1' 6"
0)
R
R
/1
"(2
TO MACHINE 3/4 " DIA
(VLAKKEN ~19)
1/4 " NPTF
1/
2"(50)
1/2 "(12)
(3 8)
(3 8)
1/
"R R 6)1' 1"
0)
1/2 "(12)
1/8 "R (R=3)
0.463"DIA(~11.75)
1 1/2 "(38)
1/4 "NPTF
0.463"DIA(~11.75)
3/4 " 3/
(1 9)
7" 7)
3/
(1
2"
2"
D
"R R 3)
D
N P
TF
0.4
D
IA
.75
3 1/2 " (90)
2"
5 3/4 " (146)
2 7/8 " (73)
1 1/4 " (32)1 1/4 " (32)
3/4 " DIA
D
DREDGE ESSAYONS
SLIDING TRUNNION BODY AND
TRUNNION RING FOR DRAGARMS
DRAWN DWG# REV
SCALE SHEET 2 OF 3
T. WARD E-1710-15
ALTERATIONS
NO DESCRIPTION BY DATE APP'D
A
B
C
D
APPROVED ADD POS 162
SEE SHT 1
SEE SHT 1
GREASE HOLES SECTION E E DETAIL IV
PSH
PSH
GK
JS
24-04-80
14-7-80
3-81
4-82
G G
HH
I I
+0.2(184 )
(R=1.5)
SCALE 3"=1'-0"
DETAIL I
SECTION F-F"
DETAIL II
APPROVED BY ACE DATED: 2/27/80 WRSC. MD/2001.0393
(STC 1625:12 GATEN ~95 ZUIVER OP STEEK)
DETAIL IV
SCALE 3"=1'-0"
SCALE 6"=1'-0"
SCALE 6"=1'-0"
SCALE 6"=1'-0"
SCALE 3"=1'-0"SCALE 3"=1'-0"
SECTION G-G"
SCALE 3"=1'-0"
DETAIL III
SECTION B-B"
SECTION I-I"
SECTION H-H""
SECTION E-E""
SECTION C-C" SECTION D-D""""
A
10111213141516
A
B
C
D
E
F
16 15 14 13 12 11 10 9
F
E
D
6 3/4 " (170)
1/2 "R (R=12)
2" (50)
1"R (R=25)
2" (50)
2'-9 1/2 " (850)2'-9 1/2 " (850)
1/4 "(6) 1/4 "(6)10" (254)
1/2 " (12)
1/2 " (12)5 3/4 " (146)
11/32 " ( 6)
2" 3 3/4 "
(50) (95) 49.764" (1264 ) 49.843" +2
0 49.764" (1264 ) 49.843" +2
8"
0)
9" R
(R =5
0)
3 3/4 " (95)
2" (50)
See sht
3"
3" (75) 3/4 " (19)
H O
LE
D
IA
(G A T.
3/
D
IA
2)
8 7/8 " (225)
6 11/16 "R (R=170)
(1 0)
D
IA
D
IA
.7
.7
1.
0.
.6
.6
0.
D
IA
D
IA
0)
2.567" +0.2 2.559" (65 +0 )
1 3/4 " (45)
4'
1/
(1
5)
R R 1)
12" (305)
11.811" +0.2 11.732" (298 )+0 1/4 " (7)
7.244" 7.252"
+0
3.976" 4.055"
+2 +0(101 )
1/2 " (13)
"R R
3) 1/16 "R x
5° (5 x4 5°
125 125
.9
.9
0.
0.
(1 6)
(1 8)
D
IA
.0
.0
0.
0.
D
IA
138 8 3/4 " (220)
4" (1
3'-3 7/8 "R (R=1013)
1/32 " (1)
50°
9 1/2 " (240) 1/2 " (12)
1/
(9 0)
1"
1"(25) 2"(50)
50°
A
1/32 " (1)
50°50°
1"(25) 1"(25)6"(150)
1'
1/
(3
UNC 1"
1"DIA (~25)
11/32 "( 6)
1' 9"
4) 8" (2
7/8 "(22)
1/4 "R(R=6)
2' 5"
7) 4'
3/
(1
5)
A
APPROVED BY J.J. HENRY DATED: 2/27/80
APPROVED BY SSY DATED: 3/27/80
3 1/2 "(92)
1/2 "(12)
3/
(1
1/2 " (12)
7 7/8 " (200)
3/8 "(10)
3/8 "(10)
44 1/4 " DIA (~1125)
DBC 64":12 HOLES ~3 3/4 " EXACTLY ON PITCH
77 3/4 " DIA (1975)
1/
6"(152) 3" (76)
7 3/4 "(197)
1/
"(3 8)
8" (2
1'-9"(534) 1'-9"(534)
1'
(5
133 162 A
TAPHOLES UNC 3/4 " DEEP 1 5/8 " FOR EYEBOLTS
WICH ARE USED DURING MOUNTING
TAPGATEN UNC 3/4 " DIEP 42 VOOR OOGBOUTEN
WELKE GEBRUIKT WORDEN BU MONTAGE
TO MACHINE 2"DIA (VLAKKEN ~50)
AIR CONNECTION UNC 1"
(LUCHTAANSLUITING)
HOLE 0.752" DIA
0.757"
C11 +0.24(GAT ~19 ) +0.11
5/
.7
.7
0.
1 3/4 "(45)
2"(50)
3"(75) 1"(25)
3 1/2 "(90)
D
IA
6" (152)
1' 6"
0)
R
R
/1
"(2
TO MACHINE 3/4 " DIA
(VLAKKEN ~19)
1/4 " NPTF
1/
2"(50)
1/2 "(12)
(3 8)
(3 8)
1/
"R R 6)1' 1"
0)
1/2 "(12)
1/8 "R (R=3)
0.463"DIA(~11.75)
1 1/2 "(38)
1/4 "NPTF
0.463"DIA(~11.75)
3/4 " 3/
(1 9)
7" 7)
3/
(1
2"
2"
D
"R R 3)
D
N P
TF
0.4
D
IA
.75
3 1/2 " (90)
2"
5 3/4 " (146)
2 7/8 " (73)
1 1/4 " (32)1 1/4 " (32)
3/4 " DIA
D
DREDGE ESSAYONS
SLIDING TRUNNION BODY AND
TRUNNION RING FOR DRAGARMS
DRAWN DWG# REV
SCALE SHEET 2 OF 3
T. WARD E-1710-15
ALTERATIONS
NO DESCRIPTION BY DATE APP'D
A
B
C
D
APPROVED ADD POS 162
SEE SHT 1
SEE SHT 1
GREASE HOLES SECTION E E DETAIL IV
PSH
PSH
GK
JS
24-04-80
14-7-80
3-81
4-82
G G
HH
I I
+0.2(184 )
(R=1.5)
SCALE 3"=1'-0"
DETAIL I
SECTION F-F"
DETAIL II
APPROVED BY ACE DATED: 2/27/80 WRSC. MD/2001.0393
(STC 1625:12 GATEN ~95 ZUIVER OP STEEK)
DETAIL IV
SCALE 3"=1'-0"
SCALE 6"=1'-0"
SCALE 6"=1'-0"
SCALE 6"=1'-0"
SCALE 3"=1'-0"SCALE 3"=1'-0"
SECTION G-G"
SCALE 3"=1'-0"
DETAIL III
SECTION B-B"
SECTION I-I"
SECTION H-H""
SECTION E-E""
SECTION C-C" SECTION D-D""""
A
10111213141516
A
B
C
D
E
F
16 15 14 13 12 11 10 9
F
E
D
6 3/4 " (170)
1/2 "R (R=12)
2" (50)
1"R (R=25)
2" (50)
2'-9 1/2 " (850)2'-9 1/2 " (850)
1/4 "(6) 1/4 "(6)10" (254)
1/2 " (12)
1/2 " (12)5 3/4 " (146)
11/32 " ( 6)
2" 3 3/4 "
(50) (95) 49.764" (1264 ) 49.843" +2
0 49.764" (1264 ) 49.843" +2
8"
0)
9" R
(R =5
0)
3 3/4 " (95)
2" (50)
See sht
3"
3" (75) 3/4 " (19)
H O
LE
D
IA
(G A T.
3/
D
IA
2)
8 7/8 " (225)
6 11/16 "R (R=170)
(1 0)
D
IA
D
IA
.7
.7
1.
0.
.6
.6
0.
D
IA
D
IA
0)
2.567" +0.2 2.559" (65 +0 )
1 3/4 " (45)
4'
1/
(1
5)
R R 1)
12" (305)
11.811" +0.2 11.732" (298 )+0 1/4 " (7)
7.244" 7.252"
+0
3.976" 4.055"
+2 +0(101 )
1/2 " (13)
"R R
3) 1/16 "R x
5° (5 x4 5°
125 125
.9
.9
0.
0.
D
IA
(1 6)
D
IA
(1 8)
D
IA
.0
.0
0.
0.
D
IA
138 8 3/4 " (220)
4" (1
3'-3 7/8 "R (R=1013)
1/32 " (1)
50°
9 1/2 " (240) 1/2 " (12)
1/
(9 0)
1"
1"(25) 2"(50)
50°
A
1/32 " (1)
50°50°
1"(25) 1"(25)6"(150)
1'
1/
(3
UNC 1"
1"DIA (~25)
11/32 "( 6)
1' 9"
4) 8" (2
7/8 "(22)
1/4 "R(R=6)
2' 5"
7) 4'
3/
(1
5)
A
APPROVED BY J.J. HENRY DATED: 2/27/80
APPROVED BY SSY DATED: 3/27/80
3 1/2 "(92)
1/2 "(12)
3/
(1
1/2 " (12)
7 7/8 " (200)
3/8 "(10)
3/8 "(10)
44 1/4 " DIA (~1125)
DBC 64":12 HOLES ~3 3/4 " EXACTLY ON PITCH
77 3/4 " DIA (1975)
1/
6"(152) 3" (76)
7 3/4 "(197)
1/
"(3
8)
8" (2
1'-9"(534) 1'-9"(534)
1'
(5
133 162 A
TAPHOLES UNC 3/4 " DEEP 1 5/8 " FOR EYEBOLTS
WICH ARE USED DURING MOUNTING
TAPGATEN UNC 3/4 " DIEP 42 VOOR OOGBOUTEN
WELKE GEBRUIKT WORDEN BU MONTAGE
TO MACHINE 2"DIA (VLAKKEN ~50)
AIR CONNECTION UNC 1"
(LUCHTAANSLUITING)
HOLE 0.752" DIA
0.757"
C11 +0.24(GAT ~19 ) +0.11
5/
.7
.7
0.
1 3/4 "(45)
2"(50)
3"(75) 1"(25)
3 1/2 "(90)
D
IA
6" (152)
1' 6"
0)
R
R
/1
"(2
TO MACHINE 3/4 " DIA
(VLAKKEN ~19)
1/4 " NPTF
1/
2"(50)
1/2 "(12)
(3 8)
(3 8)
1/
"R R 6)1' 1"
0)
1/2 "(12)
1/8 "R (R=3)
0.463"DIA(~11.75)
1 1/2 "(38)
1/4 "NPTF
0.463"DIA(~11.75)
3/4 " 3/
(1 9)
7" 7)
3/
(1
2"
2"
D
"R R 3)
D
N P
TF
0.4
D
IA
.75
3 1/2 " (90)
2"
5 3/4 " (146)
2 7/8 " (73)
1 1/4 " (32)1 1/4 " (32)
3/4 " DIA
D
DREDGE ESSAYONS
SLIDING TRUNNION BODY AND
TRUNNION RING FOR DRAGARMS
DRAWN DWG# REV
SCALE SHEET 2 OF 3
T. WARD E-1710-15
ALTERATIONS
NO DESCRIPTION BY DATE APP'D
A
B
C
D
APPROVED ADD POS 162
SEE SHT 1
SEE SHT 1
GREASE HOLES SECTION E E DETAIL IV
PSH
PSH
GK
JS
24-04-80
14-7-80
3-81
4-82
G G
HH
I I
+0.2(184 )
(R=1.5)
SCALE 3"=1'-0"
DETAIL I
SECTION F-F"
DETAIL II
APPROVED BY ACE DATED: 2/27/80 WRSC. MD/2001.0393
(STC 1625:12 GATEN ~95 ZUIVER OP STEEK)
DETAIL IV
SCALE 3"=1'-0"
SCALE 6"=1'-0"
SCALE 6"=1'-0"
SCALE 6"=1'-0"
SCALE 3"=1'-0"SCALE 3"=1'-0"
SECTION G-G"
SCALE 3"=1'-0"
DETAIL III
SECTION B-B"
SECTION I-I"
SECTION H-H""
SECTION E-E""
SECTION C-C" SECTION D-D""""
A
10111213141516
A
B
C
D
E
F
16 15 14 13 12 11 10 9
F
E
D
1- 3/
4" 1-
5/ 8"
1- 5/
8"
3-1/4"
6"
6"
3"
7-1/4"
FINISHED
(TORCH CUT)
1/2
TYP.
3 HOLES
30°
23-C
23-C
DRILL 5/8 " TYP 8 HOLES
USE JIG TO LOCATE HOLES.
1-1/4"
5-3/8"
1- 3/
4"
1- 3/
4"
ALL HOLES DRILL 17/32 " TAP 5/8 "-11 UNC
USE JIG TO LOCATE ALL HOLES
TYPE 8 HOLES
5/8 "1-5/8"
3-1/4"
TYP 3 HOLES
LOCATE KEEPER
BY JIG
6-1/2"
1/2
6-1/2" X 3/4 " THICK COLD FINISHED
MILD STEEL F.B.
19-B 19-B
6"
6"
26" 1/16 " 17- B
17- B
30°
3-1 /4" 1-5
/8"
1-5 /8"
6-1 /2"
3"
1-11/16"
3 HOLE TYP USE JIG
TO LOCATE
SEE TABLE @
SECTION 17-B
DETAIL 19-B
BRG MOUNT PL
4 EA. REQD.
NO SCALE
1-1/2" PL. (A-36)
45°
45°
1/8 " TO 1/4 "
WELD PREP.
FWD & AFT TOP PLATES SAME BUT
OPP. HAND. FIT PLATES TO TRUNNION.
THEN DRILL HOLES & INSTALL BRG
RETAINERS & WELD IN PLACE. TACK IT
IN. THEN FIT & LOCKATE BACK SIDE
GUSSETS. HEAT CASTING TO 100°F
BEFORE WELDING USE 7018 LO-HI
ROD. DO NOT USE HIGHER STRENGTH
ROD OR DUCTILITY IS IMPAIRED.
DETAIL 21-A
2 REQD/TRUNNION
(4 PER SHIP)
1/2 OF THEM AS SHOWN
1/2 OPP HAND
45°
1/8 "
5/8 " THREADED ROD X 1/8 " LONG
316 SS HELI-ARC SEAL WELD
GRIND FLUSH
(OPT SILVER SOLDER)
3/16 " DIA THROUGH TO CENTER
HOLE.
MAKE 2 AS SHOWN & 2
OPP. HAND
COUNTER DRILL #11/32
1" DEEP TAP 1/8 " NPT
MAKE 2 EACH AS SHOWN
& 2 EACH W/GREASE
HOLE FROM OPP. SIDE.
SECTION 19-B
NO SCALE
REMOVE THREADS 1/4 " WIDE GROVE
BETWEEN SIDE HOLE & BOTTOM OF
RETAINER BOLT HOLE.
KEEPER PLATE
NO SCALE
A B
C 4
4DESC DRILL 17/32 TAP 5/8 "-11 UNC
WITH THE 3 HOLES DRILLED 5/8 "
(NO TAP) FOR WELDED END.
WITH HOLES DRILLED 5/8 " &
COUNTER SUNK FOR FLUSH BOLT.
ITEM QTY HOLE TABLE
SECTION 17-B
NO SCALE
NOTES:
EXISTING GREASE LINES ARE 1/2 " - USE TUBE UNION &
REDUCER TO DROP TO 3/8 " TUBE USE 3/8 " O.D. X 0.65 WALL
TYPE 316 SS TUBE.
QUANT FTG NO.
FITTINGS LIST (PARKER NO'S)
6-FBU-SS
6-CBU-SS
8-6-TRBU-SS
8-HBU-SS
(STRAIGHT)
(9O°)
DEPENDING UPON TUBE ROUTE SELECTED EITHER FITTING
MAY BE USED ON TOP. THE STRAIGHT FTG MAKES ACCESS
TO THE BOLT BETTER. BE CAREFUL ROUTING THE BOTTOM
TUBE & USE ADEQUATE HANGERS.
1- 3/
4"
NO SCALE
SCALE SHEET 3 OF 3
DRAWN DWG # REV
DREDGE ESSAYONS
SLIDING TRUNNION BODY AND
TRUNNION RING FOR DRAGARMS
T. WARD E-1710-15
5-3/8"
26-3/16" 1/16 "+- +-
24 23 22 21 20 19 18 17
A
B
C
D
E
F
CORPS OF ENGINEERS 23 22 21 20 19 18 17 U.S. ARMY
F
E
D
C
A
1- 3/
4" 1-
5/ 8"
1- 5/
8"
3-1/4"
6"
6"
3"
7-1/4"
FINISHED
(TORCH CUT)
1/2
TYP.
3 HOLES
30°
23-C
23-C
DRILL 5/8 " TYP 8 HOLES
USE JIG TO LOCATE HOLES.
1-1/4"
5-3/8"
1- 3/
4"
1- 3/
4"
ALL HOLES DRILL 17/32 " TAP 5/8 "-11 UNC
USE JIG TO LOCATE ALL HOLES
TYPE 8 HOLES
5/8 "1-5/8"
3-1/4"
TYP 3 HOLES
LOCATE KEEPER
BY JIG
6-1/2"
1/2
6-1/2" X 3/4 " THICK COLD FINISHED
MILD STEEL F.B.
19-B 19-B
6"
6"
26" 1/16 " 17- B
17- B
30°
3-1 /4" 1-5
/8"
1-5 /8"
6-1 /2"
3"
1-11/16"
3 HOLE TYP USE JIG
TO LOCATE
SEE TABLE @
SECTION 17-B
DETAIL 19-B
BRG MOUNT PL
4 EA. REQD.
NO SCALE
1-1/2" PL. (A-36)
45°
45°
1/8 " TO 1/4 "
WELD PREP.
FWD & AFT TOP PLATES SAME BUT
OPP. HAND. FIT PLATES TO TRUNNION.
THEN DRILL HOLES & INSTALL BRG
RETAINERS & WELD IN PLACE. TACK IT
IN. THEN FIT & LOCKATE BACK SIDE
GUSSETS. HEAT CASTING TO 100°F
BEFORE WELDING USE 7018 LO-HI
ROD. DO NOT USE HIGHER STRENGTH
ROD OR DUCTILITY IS IMPAIRED.
DETAIL 21-A
2 REQD/TRUNNION
(4 PER SHIP)
1/2 OF THEM AS SHOWN
1/2 OPP HAND
45°
1/8 "
5/8 " THREADED ROD X 1/8 " LONG
316 SS HELI-ARC SEAL WELD
GRIND FLUSH
(OPT SILVER SOLDER)
3/16 " DIA THROUGH TO CENTER
HOLE.
MAKE 2 AS SHOWN & 2
OPP. HAND
COUNTER DRILL #11/32
1" DEEP TAP 1/8 " NPT
MAKE 2 EACH AS SHOWN
& 2 EACH W/GREASE
HOLE FROM OPP. SIDE.
SECTION 19-B
NO SCALE
REMOVE THREADS 1/4 " WIDE GROVE
BETWEEN SIDE HOLE & BOTTOM OF
RETAINER BOLT HOLE.
KEEPER PLATE
NO SCALE
A B
C 4
4DESC DRILL 17/32 TAP 5/8 "-11 UNC
WITH THE 3 HOLES DRILLED 5/8 "
(NO TAP) FOR WELDED END.
WITH HOLES DRILLED 5/8 " &
COUNTER SUNK FOR FLUSH BOLT.
ITEM QTY HOLE TABLE
SECTION 17-B
NO SCALE
NOTES:
EXISTING GREASE LINES ARE 1/2 " - USE TUBE UNION &
REDUCER TO DROP TO 3/8 " TUBE USE 3/8 " O.D. X 0.65 WALL
TYPE 316 SS TUBE.
QUANT FTG NO.
FITTINGS LIST (PARKER NO'S)
6-FBU-SS
6-CBU-SS
8-6-TRBU-SS
8-HBU-SS
(STRAIGHT)
(9O°)
DEPENDING UPON TUBE ROUTE SELECTED EITHER FITTING
MAY BE USED ON TOP. THE STRAIGHT FTG MAKES ACCESS
TO THE BOLT BETTER. BE CAREFUL ROUTING THE BOTTOM
TUBE & USE ADEQUATE HANGERS.
1- 3/
4"
NO SCALE
SCALE SHEET 3 OF 3
DRAWN DWG # REV
DREDGE ESSAYONS
SLIDING TRUNNION BODY AND
TRUNNION RING FOR DRAGARMS
T. WARD E-1710-15
5-3/8"
26-3/16" 1/16 "+- +-
24 23 22 21 20 19 18 17
A
B
C
D
E
F
CORPS OF ENGINEERS 23 22 21 20 19 18 17 U.S. ARMY
F
E
D
C
A
EXISTING ESSAYONS
CONFIGURATION
THIS AREA SHOULD BE
CLEANED AND FREE OF
DEBRIS, SCARRING AND
BURRS.
FREE STACK
HEIGHT,H
D
TOP SPACER
SEAL
STACK(COMPRESS
FREE HEIGHT BY
2%)
BOTTOM SPACER
DO NOT REMOVE
FREE STACK
HEIGHT,H
EXISTING ESSAYONS
CONFIGURATION
THIS AREA SHOULD BE
CLEANED AND FREE OF
DEBRIS, SCARRING AND
BURRS.
TOP SPACER
SEAL
STACK(COMPRESS
FREE HEIGHT BY
2%)
BOTTOM SPACER
DO NOT REMOVE
D
ES1710-37
SWELL COMP.
SEALS
U.S. ARMY ENGINEER DISTRICT, PORTLAND
DESIGNED:
DRAWN:
CHECKED:
DATE:
REV.
APPROVED:
DREDGE ESSAYONS
COMP. DATE
DRAWING NO.
DATE: SCALE:
DRAWING SCALE
SHEET ____ OF ____
19 JAN 01NONE
SHIPS COORDINATOR / CHIEF DREDGE & PLANT
A
B
C
D
E
FF
E
D
C
B
A
12345678
12345678
1 1
SRC
SRF
WDM
EXISTING ESSAYONS
CONFIGURATION
THIS AREA SHOULD BE
CLEANED AND FREE OF
DEBRIS, SCARRING AND
BURRS.
FREE STACK
HEIGHT,H
D
TOP SPACER
SEAL
STACK(COMPRESS
FREE HEIGHT BY
2%)
BOTTOM SPACER
DO NOT REMOVE
FREE STACK
HEIGHT,H
EXISTING ESSAYONS
CONFIGURATION
THIS AREA SHOULD BE
CLEANED AND FREE OF
DEBRIS, SCARRING AND
BURRS.
TOP SPACER
SEAL
STACK(COMPRESS
FREE HEIGHT BY
2%)
BOTTOM SPACER
DO NOT REMOVE
D
ES1710-37
SWELL COMP.
SEALS
U.S. ARMY ENGINEER DISTRICT, PORTLAND
DESIGNED:
DRAWN:
CHECKED:
DATE:
REV.
APPROVED:
DREDGE ESSAYONS
COMP. DATE
DRAWING NO.
DATE: SCALE:
DRAWING SCALE
SHEET ____ OF ____
19 JAN 01NONE
SHIPS COORDINATOR / CHIEF DREDGE & PLANT
A
B
C
D
E
FF
E
D
C
B
A
12345678
12345678
1 1
SRC
SRF
WDM
| e-1710-1-1of4 |
| e-1710-1-2of4 |
| e-1710-1-3of4 |
| e-1710-1-4of4 |
| e-1710-2 |
| e-1710-3-1of1 |
| e-1710-4-1of1 |
| e-1710-005 |
| e-1710-6-1of5 |
| e-1710-6-2of5 |
| e-1710-6-3of5 |
| e-1710-6-4of5 |
| e-1710-6-5of5 |
| e-1710-8-1of5 |
| e-1710-8-2of5 |
| e-1710-8-3of5 |
| e-1710-8-4of5 |
| e-1710-8-5of5 |
| e-1710-9-1of5 |
| e-1710-9-2of5 |
| e-1710-9-3of5 |
| e-1710-9-4of5 |
| e-1710-9-5of5 |
| e-1710-10-2of4 |
| e-1710-10-3of4 |
| e-1710-10-4of4 |
| e-1710-11 |
| e-1710-12-1of2 |
| e-1710-12-2of2 |
| e-1710-13-1of2 |
| e-1710-13-2of2 |
| e-1710-14-1of3 |
| e-1710-14-2of3 |
| e-1710-14-3of3 |
| e-1710-15-1of3 |
| E1710-15-2of3 Trunnion sliding Piece |
| Model |
| Layout1 |
| E1710-15-2of3 |
| Model |
| Layout1 |
| e-1710-15-2of3 |
| E1710-15-3of3 Trunnion Sliding Piece |
| Model |
| E1710-15-3of3 |
| Model |
| e-1710-15-3of3 |
| e-1710-16 |
| e-1710-18 |
| e-1710-21 |
| e-1710-22-1of2 |
| e-1710-22-2of2 |
| e-1710-23-1of3 |
| e-1710-23-2of3 |
| e-1710-23-3of3 |
| e-1710-25 |
| e-1710-35 |
| e-17101-10-1of4 |
| Es1710-37 Swell comp seal |
| Model |
| Layout1 |
| Es1710-37 |
| Model |
| Layout1 |
File details come from the government source that posted it. Updated .