Attachment_5_-Dugway_Building_4531_TAB_16373-FINAL-2-19-2014.pdf
PDF 3 MB Posted
- Attached to
- Dugway Proving Ground Utah HVAC Unit Federal contract opportunity
- Solicitation number
- W911S619B0002
About this file
Attachment 5 -Dugway Building 4531 TAB 16373-FINAL-2-19-2014
View the file
Other files for this federal contract opportunity
Show all 31
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
TEST & BALANCE REPORT
THIS IS TO CERTIFY THAT RSANALYSIS, INC. HAS BALANCED THE SYSTEM DESCRIBED HEREIN TO THEIR OPTIMUM PERFORMANCE CAPABILITIES, UNLESS OTHERWISE NOTED IN THE PROJECT SUMMARY. THE TESTING AND BALANCING HAS BEEN PERFORMED IN ACCORDANCE WITH THE STANDARD REQUIREMENTS AND PROCEDURES OF THE ASSOCIATED AIR BALANCE COUNCIL AND THE RESULTS OF THESE TESTS ARE
HEREIN RECORDED.
DUGWAY PROVING GROUND BUILDING 4531
OPERATIONS / ENGINEERING
FINAL BALANCE
CLIENT: CORE ENGINEERING & CONSTRUCTION
MECHANICAL ENGINEER: HONEYWELL BUILDING SOLUTIONS
PROJECT NUMBER: 16373-F
DATE: 10/01/2013
TECHNICIAN: JEFF BELL / CORY HARDY
TBE: DEREK SHUPE
AHU-1
AHU-2
AHU-3
RTU-1
CR-1-2
CR-1-3
CR-1-1
CR-2-2
CR-2-3
CR-2-4
CR-2-5
CR-3-1
CR-3-2
CR-4
CR-5
EF-1
EF-2
EF-3
EF-4
HP-1, HP-2
RP-1
AHU-1,-2 HHW
SCHEMATIC
A
Environmental System Testing and Balancing
C
32-33
PERFORMANCE GUARANTEE
24-25
28-29
30-31
26-27
E
F
B
Table of Contents
PAGEDESCRIPTION
NOT OPERATIONAL
41-42
38-39
DELETED
1-8
NOT INSTALLED
NOT INSTALLED
34-35
NOT INSTALLED
9-16
17-21
NOT INSTALLED
CERTIFICATE
SYMBOL SHEET
36-37
D
NOT INSTALLED
NOT INSTALLED
22-23
TEST & BALANCE INSTRUMENTATION
UNIT
GENERAL NOTES
PROJECT SUMMARY
AABC National Performance Guaranty
Pursuant to the agreement between
AABC Certified Testing & Balancing Agency and Client
Associated Air Balance Council
1518 K Street, N.W.
Washington, D.C. 20005
202-737-0202 • Fax 202-638-4833 info@aabc.com • www.aabc.com
All systems shall be tested and balanced in accordance with the project plans and specifications and to the optimum performance capabilities of the equipment. Testing and balancing shall be done in accordance with the standards published by the Associated Air Balance Council.
If the Agency listed above fails to comply with the specifications for any reason other than termination of business by the AABC agency or equipment malfunction or inadequacy which prevents proper balancing of the systems, AABC will investigate and, if warranted, will provide supervisory personnel to assist the member Agency to perform work in accordance with AABC Standards. This supervision will be provided at no additional cost to the building owner.
This Guaranty is valid for one year from the date of submission of a test and balance report, provided theAgency is a currentmember ofAABC, andmayonly be invoked inwriting by the building owner, architect, or engineer of record. The Guaranty is limited to the terms and conditions as stated herein.
Project Name
Address
Name of Engineer
Engineering Firm
Email Address
Address
Date
TBE #
By AABC Certified TBE
RSAnalysis, Inc.
CORE ENGINEERING & CONSTRUCTION
DUGWAY PROVING GROUNDS
BUILDING 4531 OPERATIONS / ENGINEERING
HONEYWELL BUILDING SOLUTIONS
10/1/2013
99-03-33
Mr. Derek Shupe
Derek Shupe
RSAnalysis, Inc. (Utah)
VVJMPJPP
Jeffrey A. Bell
RSAnalysis, Inc.
OOMJMNJNM
Cory T. Hardy
RSAnalysis, Inc.
OONJMNJNM
Ceiling diffusers were measured with a direct CFM read-out meter (see calibration sheet).
Balance factors for exhaust sidewall and supply grilles were calculated from the core area and measured with a rotating vane anemometer.
Static pressures tested for roof mounted exhaust fans show only suction side static and not total static pressure as listed in catalogs.
Static control pressure (SCP) is the minimum amount of static pressure required to operate the farthest terminal unit at design condition when the system is set up for design CFM at the fan.
All corrections for instruments used for testing and balancing are traceable back to the national bureau of standards and are tested in our own labs.
Date RSA Job #1-Oct-13 16373-F
Outlets for the fans were numbered with closest to the fan as #1.
The VAV terminal unites were tested on maximum CFM demand when total CFM of the terminal units exceeded the fan total a portion of the terminal unites were turned down to equal the design CFM of the fan. Data shown in motor and fan tested column of the fan test sheet was taken in the turn down (diversity) condition. See fan sheet for the exact amount of diversity.
GENERAL NOTES
Correction for temperature and altitude have been made on all test results shown in this report.
A F.S.R. - Floor Supply Register OPEN - No Terminal Device Installed
SYMBOL SHEET
ACCU - Air Cooled Condensing Unit G P
ADJ P.D. - Adjusted Pitch Diameter GPM - Gallons Per Minute PF - Power Factor
AHU - Air Handling Unit FT. HD. - Feet of Head OSA Min. - Outside Air Minimum
AC or ACU - Air Conditioning Unit FTU - Fan Terminal Unit OAT - Outside Air Temperature
B H PMP - Circulating Pump
B.H.P - Brake Horsepower HC - Heating Coil P.P. - Perforated Plate
AMP - Amperage GFH - Gas Fired Heater PHC - Preheat Coil
AVG. - Average GFHC - Gas Fired Heating Coil PH - Phase (s)
C Heater O.L. - Thermal Overload
Protection For Motors
PSI - Pounds Per Square Inch
C.D. - Ceiling Diffuser P.T. - Pitot Traverse
CFM - Cubic Feet Per Minute HEPA - High Efficiency Particulate
Arrestance
R
C.E. - Ceiling Exhaust RA - Return Air
CHWR - Chilled Water Return H.P. - Horsepower RHC - Reheat Coil
CHW or CHWS - Chilled Water Supply HPS - High Pressure Steam RPM - Revolutions Per Minute
CEF - Ceiling Exhaust Fan H.F. - Hepa Filter RF - Return Air Fan
CH - Chiller HOA - Hand/Off/Auto Switch R.G. - Return Grille
C.R. - Ceiling Return HRC - Heat Recovery Coil or Heat
Reclaim Coil
S
CT - Cooling Tower SA - Supply Air
CWR - Condenser Water Return HVAC - Heating, Ventilation & Air
Conditioning
SAT - Supply Air Temperature
CW or CWS - Condenser Water Supply
S.D. - Supply Diffuser
D.P. - Difference, Net Increase or
Decrease
HX - Heat Exchanger SP "WC" - Static Pressure, Measured in
Inches of Water ColumnI
DIA - Diameter I.D. - Inside Diameter S.W.E - Sidewall Exhaust
HWR - Hot Water Return or Heating
Water Return
SEF - Smoke Exhaust Fan
D SF (Air) - Supply Fan
DB - Dry Bulb HWS - Hot Water Supply or Heating
Water Supply
S.F. (Electric) - Service Factor
D.D. - Direct Drive SHC - Steam Heating Coil
E L.D. - Linear Supply Diffuser T
EAT - Entering Air Temperature LPS - Low Pressure Steam TAB - Test, Adjust, & Balance
D.N.A. - Data Not Available L S.W.R. - Sidewall Return
D.N.L. - Data Not Listed LAT - Leaving Air Temperature S.W.S. Sidewall Supply
EF - Exhaust Fan LWG - Low Wall Griller UH - Unit Heater
EMCS - Energy Management Control
System (s)
LWR - Low Wall Return V
LWT - Leaving Water Temperature V - Volts
EDC - Electric Duct Coil L.R.D. - Linear Return Diffuser TSP - Total Static Pressure
EDH - Eclectic Duct Heater L.T. - Light Troffer U
FCU - Fan Coil Unit MBH - 1000 Btu's Per Hour VFD - Variable Frequency Drive
F.D. - Floor Diffuser N VP - Velocity Pressure
EWT - Entering Water Temperature M VAV - Variable Air Volume
F MAU/MUA - Make Up Air Unit VD - Volume Damper
F.E. - Floor Exhaust or Return N.T. - Not Taken WB - Wet Bulb
F.L.A. - Full Load Amperage N.V.L - No Valid Location W.G. - Water Gauge
FH - Fume Hood N.A. - Not Accessible W
FG - Floor Grille N.I. - Not Installed W - Watts
F.S. - Floor Supply O.D. - Outside Diameter ∆T - Differential (Delta) Temperature
FPB - Fan Powered Box N.Z. - Nozzle Misc.
FPM - Feet Per Minute O ∆P - Differential (Delta) Pressure
THERMOMETER SHORTRIDGE ADM 860 M03374 5/30/2013
AIR DATA MULTIMETER SHORTRIDGE ADM-860 M03374 5/30/2013
HYDRONIC MANOMETER SHORTRIDGE HDM-250 M03382 5/30/2013
Photo Electric TACHOMETER TONDAJ DT-2234C T195546 5/30/2013
TACHOMETER O. ZERNICKOW CO.. 252 731091 5/30/2013
ALNOR RVA+ 70447167 5/23/2013
AMPMETER Milwaukee 2236-20 B86A909510036 5/30/2013
DATE
FLOW HOOD SHORTRIDGE 8400 Used Wth ADM860 N/A
RVA
THE FOLLOWING CHECKED INSTRUMENTS WERE USED TO SUCCESSFULLY MEASURE
AND SET EACH DEVICE ON THIS PROJECT.
INSTRUMENT MANUFACTURER MODEL SERIAL NO. CALIBRATION
TEST & BALANCE INSTRUMENTATION
TECHNICIAN: JEFF A. BELL
HYDRONIC MANOMETER ALNOR HM 650 70428261 3/11/2013
THERMOMETER SHORTRIDGE ADM-860C M03382 3/11/2013
AIR DATA MULTIMETER SHORTRIDGE ADM-860C M03382 3/11/2013
PHOTO ELECTRIC TACHOMETER TONDAJ DT-2234C+ S2005409 3/7/2013
AMPMETER FLUKE 902 92130022 3/7/2013
ALNOR RVA 801 A01016 3/11/2013
DATE
FLOW HOOD SHORTRIDGE 8400 USED W/ADM-860 N/A
RVA
THE FOLLOWING CHECKED INSTRUMENTS WERE USED TO SUCCESSFULLY MEASURE
AND SET EACH DEVICE ON THIS PROJECT.
INSTRUMENT MANUFACTURER MODEL SERIAL NO. CALIBRATION
TECHNICIAN: CORY T. HARDY
CLAMP ON AMP METER MILWAUKEE 2235-20 C90A912100114 8/28/2013
TEKNIKA DT-2234C T453004 8/28/2013DIGITAL TACHOMETER
DIGITAL MULTIMETER TEKNIKA 2216-20 D57180 8/28/2013
TEMPERATURE GUN FLUKE 62 MINI 15540625 10/11/2012
HYDRONIC MANOMETER SHORTRIDGE HDM 250 W08013 10/11/2013
THERMOMETER SHORTRIDGE ADM 860C M03382 12/19/2013
CONTACT TACHOMETER JACQUET 253 735393 8/30/2013
AIR DATA MULTIMETER SHORTRIDGE ADM-860C M97573 12/19/2013
ALNOR RVA+ 330496 11/10/2012
AMPROBE FLUKE 335 85452809 8/28/2013
DATE
FLOW HOOD SHORTRIDGE 8400 Used With ADM860C NOT REQUIRED
RVA
THE FOLLOWING CHECKED INSTRUMENTS WERE USED TO SUCCESSFULLY MEASURE
AND SET EACH DEVICE ON THIS PROJECT.
INSTRUMENT MANUFACTURER MODEL SERIAL NO. CALIBRATION
TECHNICIAN: DEREK R. SHUPE
The following are observations and some outstanding issues that are related to the conditions that exist for the various systems in the Operation and Engineering building during our testing and balancing efforts:
Heating Water:
The building was retrofitted with a new boiler and pumps from the original installation. The boiler and pumps were installed at a reduced flow rate as that of the original installation. We requested the engineered values for the reheat coils and unit heater coils as to the new values required for the individual flow rates for the heating water system. These were provided by an independent engineer from the contractor that did the boiler and pump replacement. Some of the existing balance valves were not readable and were set for a position to gain the temperature rise from the coils at the minimum heating air flow through the coil.
Computer Room Units:
Several of the computer room air conditioning units (CRU) have been removed from the building and the rooftop condensing units have been abandoned in place. The units that are still in use were tested and the existing values are listed in the report as is.
Some of the CR units that are ducted do not have any balance dampers for the individual grilles and diffusers for these systems.
The total air flow was set for the entire room delivered from the CRU serving the DTCC and Mission Control server room.
Generator Building AHU-3 and Battery Room Exhaust:
It was observed that most all of the fusible link fire dampers located behind the supply diffusers serving the generator building were closed with their fusible links fused. Upon a power failure that occurred while we were working on the system revealed that the fresh air intakes for the generator air flow were not opening . The failure of these dampers opening during the generator run time is the probable cause of the links being fused. The generators are scheduled for a weekly test run on each Monday morning.
The base personnel was made aware of this problem. The dampers were opened by the base maintenance personnel so we could get the system balanced.
It was determined that the battery room was no longer being used as battery storage and the exhaust fan serving this room was shut off and no longer in use.
Main Air Handlers AHU-1 & AHU-2 Supply Air/VAV Boxes:
These systems have been retrofitted with new VAV boxes and controls. Several VAV boxes have been added and some of the room configurations from the original plans layout have been changed. We have updated the drawings with the additional VAV boxes and their distribution ductwork and diffusers. There were not any values shown on the drawings for these new boxes and diffusers. RSA evaluated the room use and conditions and calculated the air flow required for thes spaces to accommodate the current heat load.
These systems have full economy cooling and are equipped with a VFD on the supply fan motors and the ability for 100% economy cooling capabilities. The relief fans and dampers were not originally incorporated in the correct control sequence. The control contractor was made aware of this issue and have since implemented a program and hardware devices to allow for the relief fans to operate as relief fans in lieu of the original sequence of them operating as return fans.
Test, adjust and balance the existing system with the new VAV boxes, reheat coils, unit heaters, and controls installed. Verify operation and settings of the control system as it related to the test and balance. Report any deficiencies that may exist that prevent the propert test and balance of the system components.
PROJECT SUMMARY
Scope of Work
Outcomes & Observations
Project
DUGWAY PROVING GROUND BUILDING 4531
OPERATIONS / ENGINEERING
Date
16373-F
1-Oct-13
RSA Job # Technician JEFF BELL / CORY HARDY
Outcomes & Observations
Main Air Handlers AHU-1 & AHU-2 Supply Air/VAV Boxes (continued):
The AHU-2 system does have some diversity. We have incorporated this in our test and balance procedures. The fan is rated for
11 ,700 CFM with 13,555 CFM connected. We have set the system up to allow for the diversity factor during the test and balance process.
AHU-1 & AHU-2 Return Air:
The return air system is constructed with fibrous ductwork. Most of this type of duct system in the building is falling apart, has a large amout of leakage and is to a large extent un-balanceable in the condition that it is in. We have read the system out at each of the return air grilles and have traversed the main return air for each of the systems. However, with the history of this building it is known that the return air system has too much pressure drop because of the type of duct system with all of the support members to be able to proportionally balance the return grilles and then have the re lief fans try to overcome the added pressure with throttled balance dampers. There is a significant difference between what we have read out with the flow hood at all of the grilles versus what the total air flow was read at the fan inlet which points to the leakage issue.
It appears that with the current operation of the unbalanced return air system and the supply air system under the new control with the DOC system, all areas of the building are reaching the desired temperature set point of the thermostats.
Equipment Not Installed:
- CR-2-3,
- CR-2-4,
- CR-3-1,
- CR-3-2,
- CR-4 (Unit found sitting on a pallet in the Data Room), and
- CR-5 (not installed or has been removed).
Equipment Not Operational:
- EF-4 (Motor is not operational. It is suspected that it is burned up. This system will no longer be used. Deleted from project.), and
- RP-1 (Pump is not working. Base maintenance is going to replace pump and motor).
PROJECT SUMMARY
Project
DUGWAY PROVING GROUND BUILDING 4531
OPERATIONS / ENGINEERING
JEFF BELL / CORY HARDYTechnician
Date
RSA Job #
1-Oct-13
16373-F
P F
Remarks
Htg L.A.T. -
Fan Static Profile
Clg E.A.T. Clg L.A.T. Htg E.A.T. -
Motor Frame# 284T Speed (VFD) 60 HZ 59 HZ
Temperature Data
Phase/Hz 3/60 Motor BHP DNL 14.65
Heater Size/Rating VFD SET Motor RPM 1775 1782
Service Factor 1.15 Amperage 29 16.9 17.0 17.1
Motor HP 25 Voltage 460 479 479
Motor Data
Motor MFG. US ELECTRICAL Specified Actual
Pre / Final Filter ∆P 0.13 NONE Fixed Sheave
Control Set Point 1.25
Inlet SP 0.62 Motor Shaft 1-7/8"
Discharge SP 2.25 Sheave Adj. MID
Fan RPM DNL 1,170 Motor
TSP ESP 3.0" 2.87 Motor Sheave 10.5 OD VP
15,085 14,990 Fan Shaft 1-7/16"
15,205 12,938 Shaft C/C 30"
O/A CFM DNL 2,152 Belt Size/Number B-9512
Serial Number JS7A70311
Fan Data
Measurement
DNT
Specified Actual Fan
15,800 DNT Fan Sheave 2TC160
AIR MOVING EQUIPMENT DATA
Date 9-Sep-13 Area Served SOUTH AREA Unit AHU-1
Total R/A CFM Traverse
Total Fan CFM
OutletsTotal S/A CFM
Method
Unit Information
Fan Identification AHU-1 Equipment MFG TRANE
Equipment Location ROOF Model Number SAHCC5040C63C74DA01ANRTFXB
Type/Size PACKAGED UNIT
OSA
SA RA
-0.34" -0.47" -0.62" +2.25"
No suitable location for duct traverse.
FPM 0 Area Sq. Ft. 0.000
CFM 15,800 Centerline S.P. In. W.C.
X
Area Sq. Ft. 0.000 Duct Size I.D.
0 0 0
X
Duct Size I.D. X Duct Size O.D.
0.000 0
Design Data Test Data
Total FPM ÷ No. of Readings = Avg. FPM
Sub
Total
X Area = Total CFM
N
M
L
K
J
I
H
G
F
E
D
C
B
A
Point
No.
1 2 3 4 5 126 7 8 9 10 11
RECTANGULAR TRAVERSE SHEET (SUPPLY)
Date 30-Sep-13 Unit AHU-1 Traverse No. Traverse Location
VAL
VAL
VAL
VAL
VAL
VAL
VAL
VAL
VAL
VAL
VAL
VAL
VAL
VAL
VAL
VAL
VAL
VAL
VAL
VAL
VAL #VALUE!
Remarks
(1) Lowest possible controllable CFM for box size.
(2) Set in/OBD at grille - noisy - no control for damper
0 #VALUE!
#VALUE!
0 0 #VALUE!
#VALUE!
0 #VALUE!0 #VALUE!
0 0 #VALUE!
600 320 610 101%
0 #VALUE!0 #VALUE!
VAV-1-16 10"Ø 0.62 300 1,000 320 960 96% 300
755 440 750 99%
VAV-1-15 8"Ø 0.48 135 450 140 102%455 101% 135 225 140 230
VAV-1-14 14"Ø 0.46 380 1,260 440 1,290 102% 380
360 210 350 97%
VAV-1-13 14"Ø 0.35 305 1,020 335 100%990 97% 305 615 335 620
VAV-1-12 10"Ø 0.41 185 600 210 615 102% 185
920 465 930 101%
VAV-1-11 8"Ø 0.35 115 385 110 104%370 96% 115 230 110 240
VAV-1-10 14"Ø 0.51 460 1,530 465 1,545 100% 460
660 350 670 101%
VAV-1-9 8"Ø 0.43 125 420 135 100%410 97% 125 250 135 250
VAV-1-8 14"Ø 0.60 330 1,095
101%
VAV-1-7 14"Ø 0.43 375 1,245 370 98%1,200 96% 375 750 370 740
VAV-1-6 14"Ø 0.51
625 320 630
350 1,100 100% 330
680 355 690
310 1,040 320 990 95% 310
340 1,140 355 1,135 99% 340
VAV-1-2 8"Ø 0.24 530 530 520 520
100%
VAV-1-5 12"Ø 0.54 335 1,120 350 101%1,145 102% 335 670 350 680
VAV-1-4 12"Ø 0.63
VAV-1-3 12"Ø 0.61 280 930 290 105%930 100% 280 520 290 550
1,335 101% 400 790 425 770VAV-1-1 14"Ø 0.41 400 1,320 425
98% 530
#VALUE!
MAX MIN MAX
97%
530 520 520 98%
0 0
Actual CFM
Terminal Unit Box Size Flow Coefficient
#VALUE!
Design CFM Actual CFM
MIN MAX MIN MAX MIN
-% 10% +% 10%
Cooling Heating
Design CFM
VAV SUMMARY SHEET (SUPPLY)
Date 25-Sep-13 Unit AHU-1 Constant Variable Single Dual Flow Spec
(1)
(2)
(3)
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
385 370 370Total VAV-1-11
#DIV/0! 175 170 #DIV/0! 170 97%VAV-1-11 103 21 CD 9X9
#DIV/0! 210 200 #DIV/0! 200 95%VAV-1-11 102 20 CD 9X9
#DIV/0! #DIV/0! #VALUE!
1,530 1,405 1,545Total VAV-1-10
#DIV/0! 120 40 #DIV/0! 115 95%VAV-1-10 107 19 CD 6X6
#DIV/0! 295 285 #DIV/0! 310 105%VAV-1-10 108 18 CD 12X12
#DIV/0! 295 290 #DIV/0! 305 103%VAV-1-10 108 17 CD 12X12
#DIV/0! 295 290 #DIV/0! 305 103%VAV-1-10 108 16 CD 12X12
#DIV/0! 525 500 #DIV/0! 510 97%VAV-1-10 101 15 CD 15X15
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
1,020 990 990Total VAV-1-13
- 340 350 - 350 102%VAV-1-13 111 12 CD 12X12 -
- 340 315 - 315 92%VAV-1-13 111 11 CD 12X12 -
- 340 325 - 325 95%VAV-1-13 111 10 CD 12X12 -
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
1,260 1,085 1,290Total VAV-1-14
- 220 270 - 220 100%VAV-1-14 111 7 CD 9X9 -
- 200 30 - 215 107%VAV-1-14 111 6 CD 9X9 -
- 220 270 - 225 102%VAV-1-14 111 5 CD 9X9 -
- 200 30 - 210 105%VAV-1-14 111 4 CD 9X9 -
- 220 230 - 215 97%VAV-1-14 111 3 CD 9X9 -
- 200 255 - 205 102%VAV-1-14 111 2 CD 9X9 -
#DIV/0! #DIV/0! #VALUE!
450 455 455Total VAV-1-15
#DIV/0! 450 455 #DIV/0! 455 101%VAV-1-15 113 1 CD 15X15
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
Date 25-Sep-13 Unit AHU-1 Flow Spec -% 10% +% 10%
DIFFUSER & GRILLE TEST SHEET (SUPPLY)
FPM CFM CFM FPM CFM
Terminal
Unit Room
Outlet
No.
Code Size
Effective
Area
Design Initial Final
FPM CFM CFM FPM CFM
Terminal
Unit Room
Outlet
No.
Code Size
Effective
Area
Design Initial Final
Date 25-Sep-13 Unit AHU-1 Flow Spec -% 10% +% 10%
DIFFUSER & GRILLE TEST SHEET (SUPPLY)
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! 180 215 #DIV/0! 180 100%VAV-1-12 105 22 CD 9X9
#DIV/0! 240 155 #DIV/0! 250 104%VAV-1-12 105 23 CD 9X9
#DIV/0! 180 160 #DIV/0! 185 102%VAV-1-12 104 24 CD 9X9
600 530 615Total VAV-1-12
#DIV/0! #DIV/0! #VALUE!
- 205 150 - 195 95%VAV-1-9 157 25 CD 9X9 -
- 215 250 - 215 100%VAV-1-9 156 25A CD 9X9 -
420 400 410Total VAV-1-9
#DIV/0! 285 210 #DIV/0! 295 103%VAV-1-6 142 26 CD 12X12
#DIV/0! 285 200 #DIV/0! 285 100%VAV-1-6 142 27 CD 12X12
#DIV/0! 285 210 #DIV/0! 265 92%VAV-1-6 142 28 CD 12X12
#DIV/0! 285 215 #DIV/0! 290 101%VAV-1-6 142 29 CD 12X12
1,140 835 1,135Total VAV-1-6
#DIV/0! #DIV/0! #VALUE!
#DIV/0! 225 200 #DIV/0! 215 95%VAV-1-7 149 30 CD 12X12
#DIV/0! 360 280 #DIV/0! 340 94%VAV-1-7 147 31 CD 12X12
#DIV/0! 325 350 #DIV/0! 315 96%VAV-1-7 145 32 CD 12X12
#DIV/0! 335 320 #DIV/0! 330 98%VAV-1-7 148 33 CD 12X12
1,245 1,150 1,200Total VAV-1-7
#DIV/0! #DIV/0! #VALUE!
#DIV/0! 365 695 #DIV/0! 370 101%VAV-1-8 155 34 CD 12X12
#DIV/0! 365 85 #DIV/0! 360 98%VAV-1-8 155 35 CD 12X12
#DIV/0! 365 660 #DIV/0! 370 101%VAV-1-8 155 36 CD 12X12
1,095 1,440 1,100Total VAV-1-8
#DIV/0! #DIV/0! #VALUE!
#DIV/0! 280 400 #DIV/0! 290 103%VAV-1-5 141 37 CD 12X12
#DIV/0! 280 115 #DIV/0! 285 101%VAV-1-5 141 38 CD 12X12
#DIV/0! 280 145 #DIV/0! 275 98%VAV-1-5 141 39 CD 12X12
#DIV/0! 280 405 #DIV/0! 295 105%VAV-1-5 141 40 CD 12X12
1,120 1,065 1,145Total VAV-1-5
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
Remarks
Terminal
Unit Room
Outlet
No.
Code Size
Effective
Area
Design Initial Final
Date 26-Sep-13 Unit AHU-1 Flow Spec -% 10% +% 10%
DIFFUSER & GRILLE TEST SHEET (SUPPLY)
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! 260 105 #DIV/0! 260 100%VAV-1-4 140 41 CD 12X12
#DIV/0! 260 105 #DIV/0! 240 92%VAV-1-4 140 42 CD 12X12
#DIV/0! 260 95 #DIV/0! 245 94%VAV-1-4 140 43 CD 12X12
#DIV/0! 260 95 #DIV/0! 245 94%VAV-1-4 140 44 CD 12X12
1,040 400 990Total VAV-1-4
#DIV/0! #DIV/0! #VALUE!
#DIV/0! 310 455 #DIV/0! 320 103%VAV-1-3 150 45 CD 12X12
#DIV/0! 310 390 #DIV/0! 290 93%VAV-1-3 150 46 CD 12X12
#DIV/0! 310 370 #DIV/0! 320 103%VAV-1-3 150 47 CD 12X12
930 1,215 930Total VAV-1-3
#DIV/0! #DIV/0! #VALUE!
#DIV/0! 330 280 #DIV/0! 340 103%VAV-1-1 154 48 CD 12X12
#DIV/0! 330 300 #DIV/0! 335 101%VAV-1-1 154 49 CD 12X12
#DIV/0! 330 280 #DIV/0! 330 100%VAV-1-1 154 50 CD 12X12
#DIV/0! 330 80 #DIV/0! 330 100%VAV-1-1 154 51 CD 12X12
1,320 940 1,335Total VAV-1-1
#DIV/0! #DIV/0! #VALUE!
#DIV/0! 530 1,025 #DIV/0! 520 98%VAV-1-2 150 52 CD 15X15
530 1,025 520Total VAV-1-2
#DIV/0! #DIV/0! #VALUE!
#DIV/0! 220 305 #DIV/0! 210 95%VAV-1-16 114 8 CD 9X9
#DIV/0! 220 315 #DIV/0! 215 97%VAV-1-16 114 9 CD 9X9
#DIV/0! 220 435 #DIV/0! 220 100%VAV-1-16 114 13 CD 12X12
#DIV/0! 340 335 #DIV/0! 315 92%VAV-1-16 114 14 CD 12X12
1,000 1,390 960Total VAV-1-16
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
Remarks
(1) Higher load in this area.
#DIV/0! #DIV/0! #VALUE!
(2)
126 7 8 9 10 11
RECTANGULAR TRAVERSE SHEET (RETURN)
Date 30-Sep-13 Unit AHU-1 Traverse No. 1 Traverse Location MAIN INLET R/A
Point
No.
1 2 3 4 5
B 813 762
A 1,275 1,275
C 530 303
E
D 985 710
F
H
G
J
I
K
M
L
N
Total FPM ÷ No. of Readings = Avg. FPM
Sub
Total 3,603 3,050
15.551 12,938
Design Data Test Data
X Area = Total CFM
6,653 8 832
X 32
Area Sq. Ft. 22.000 Duct Size I.D. 70 X 32
Duct Size I.D. 72 X 44 Duct Size O.D. 70
Remarks
Readings taken with Velgrid at return air opening in the return air plenum.
FPM 691 Area Sq. Ft. 15.551
CFM 15,205 Centerline S.P. In. W.C. N/A
Terminal
Unit Room Inlet No. Code Size
Effective
Area
Design Initial Final
Date 1-Oct-13 Unit AHU-1 Flow Spec -% 10% +% 10%
DIFFUSER & GRILLE TEST SHEET (RETURN)
#VALUE! DNL 720 #DIV/0! #VALUE!AHU-1 RA 111 59A CR 24X24
#VALUE! DNL 0 #DIV/0! #VALUE!AHU-1 RA 150 76A CR 24X24
#DIV/0! 570 680 #DIV/0! 0%AHU-1 RA 142 53 CR 18X18
#DIV/0! 160 50 #DIV/0! 0%AHU-1 RA 143 54 CR 10X10
#DIV/0! 300 625 #DIV/0! 0%AHU-1 RA 111 55 CR 12X12
#DIV/0! 850 915 #DIV/0! 0%AHU-1 RA 111 56 CR 22X22
#DIV/0! 450 650 #DIV/0! 0%AHU-1 RA 113 57 CR 12X12
#DIV/0! 850 545 #DIV/0! 0%AHU-1 RA 114 58 CR 22X22
#DIV/0! 850 230 #DIV/0! 0%AHU-1 RA 111 59 CR 22X22
#DIV/0! 850 1,100 #DIV/0! 0%AHU-1 RA 111 60 CR 22X22
#DIV/0! 120 30 #DIV/0! 0%AHU-1 RA 107 61 CR 10X10
#DIV/0! 885 130 #DIV/0! 0%AHU-1 RA 108 62 CR 22X22
#DIV/0! 360 370 #DIV/0! 0%AHU-1 RA 105 63 CR 12X12
#DIV/0! 240 130 #DIV/0! 0%AHU-1 RA 104 64 CR 12X12
#DIV/0! 175 0 #DIV/0! 0%AHU-1 RA 103 65 CR 10X10
#DIV/0! 210 105 #DIV/0! 0%AHU-1 RA 102 66 CR 10X10
#DIV/0! 205 60 #DIV/0! 0%AHU-1 RA 157 67 CR 10X10
#DIV/0! 215 40 #DIV/0! 0%AHU-1 RA 156 68 CR 10X10
#DIV/0! 160 0 #DIV/0! 0%AHU-1 RA 145 69 CR 10X10
#DIV/0! 360 100 #DIV/0! 0%AHU-1 RA 147 70 CR 12X12
#DIV/0! 550 145 #DIV/0! 0%AHU-1 RA 155 71 CR 12X12
#DIV/0! 550 175 #DIV/0! 0%AHU-1 RA 155 72 CR 12X12
#DIV/0! 755 105 #DIV/0! 0%AHU-1 RA HALLWAY 73 CR 20X20
#DIV/0! 660 160 #DIV/0! 0%AHU-1 RA 154 74 CR 20X20
#DIV/0! 660 325 #DIV/0! 0%AHU-1 RA 154 75 CR 20X20
#DIV/0! 465 0 #DIV/0! 0%AHU-1 RA 150 76 CR 12X12
#DIV/0! 520 95 #DIV/0! 0%AHU-1 RA 140 77 CR 22X22
#DIV/0! 520 35 #DIV/0! 0%AHU-1 RA 140 78 CR 18X18
#DIV/0! 560 65 #DIV/0! 0%AHU-1 RA 141 79 CR 18X18
#DIV/0! 225 0 #DIV/0! 0%AHU-1 RA 149 80 CR 10X10
#DIV/0! 335 0 #DIV/0! 0%AHU-1 RA 147 81 CR 12X12
#DIV/0! 570 0 #DIV/0! 0%AHU-1 RA 148 82 CR 18X18
#DIV/0! 560 40 #DIV/0! 0%AHU-1 RA 141 83 CR 18X18
#DIV/0! 465 35 #DIV/0! 0%AHU-1 RA 150 84 CR 12X12
15,205 7,660 0Total AHU-1 RA
#DIV/0! #DIV/0! #VALUE!
Remarks
AIR MOVING EQUIPMENT DATA
Date 9-Sep-13 Area Served SOUTH AREA Unit AHU-2
Total R/A CFM Inlets
Total Fan CFM
OutletsTotal S/A CFM
Method
Unit Information
Fan Identification AHU-2 Equipment MFG TRANE
Equipment Location ROOF Model Number SAHCC3043D55C6TD3A01ANR
Type/Size PACKAGED UNIT Serial Number J87A70312
Fan Data
Measurement
DNT
Specified Actual Fan
11,700 DNT Fan Sheave 13" OD
13,355 13,335 Fan Shaft 1-7/16"
11,125 7,710 Shaft C/C 26"
O/A CFM 0 DNT Belt Size/Number B-82/2
Inlet SP 1.57 Motor Shaft 1-7/8"
Discharge SP 2.11 Sheave Adj. MID
Fan RPM DNL 1,220 Motor
TSP ESP 3.25" 3.68" Motor Sheave 2MVP80B94Q
Motor Data
Motor MFG. US ELECTRICAL Specified Actual
Pre / Final Filter ∆P 0.11 NONE Fixed Sheave
Control Set Point 1.25
Service Factor 1.15 Amperage 24.4 19.9 20.2 21.6
Motor HP 20 Voltage 460 478 479
Motor Frame# 256T Speed (VFD) 60 HZ 60 HZ
Temperature Data
Phase/Hz 3/60 Motor BHP DNL 17.50
Heater Size/Rating VFD SET Motor RPM 1775 1780
Htg L.A.T. -
Fan Static Profile
Clg E.A.T. Clg L.A.T. Htg E.A.T. -
OSA fans running, dampers closed.
Remarks
OSA
SA RA
-0.73" -0.84" -1.57" +2.11"
RECTANGULAR TRAVERSE SHEET (SUPPLY)
Date Unit AHU-2 Traverse No. Traverse Location
Point
No.
1 2 3 4 5
B
A
D
C
F
E
H
G
J
I
L
K
N
M
Total FPM ÷ No. of Readings = Avg. FPM
Sub
Total
X Area = Total CFM
0 0 0
X
Duct Size I.D. X Duct Size O.D.
0.000 0
Design Data Test Data
Remarks
No suitable location for duct traverse.
FPM 0 Area Sq. Ft. 0.000
CFM Centerline S.P. In. W.C.
X
Area Sq. Ft. 0.000 Duct Size I.D.
VAL
VAL
VAL
VAL
VAL
VAL
VAL
VAL
VAL
VAL
VAL
VAL
VAL
VAL
VAL
VAL
VAL
VAL
VAL
VAL
VAL
VAV SUMMARY SHEET (SUPPLY)
Date 30-Sep-13 Unit AHU-2 Constant Variable Single Dual Flow Spec
Design CFM Actual CFM
MIN MAX MIN MAX MIN
-% 10% +% 10%
Cooling Heating
Design CFM
0 0
Actual CFM
Terminal Unit Box Size Flow Coefficient
#VALUE!
100% 660
#VALUE!
MAX MIN MAX
103%
1,320 675 1,350 102%
585 104% 560 560 580 580VAV-2-1 14"Ø 0.23 375 560 375
VAV-2-3 8"Ø 0.40 310 310 315 101%315 101% 310 310 315 315
VAV-2-2 16"Ø 0.58 660 2,000 675 2,005
98%
VAV-2-5 6"Ø 0.63 110 360 115 100%350 97% 110 220 115 220
VAV-2-4 14"Ø 0.51 660 2,200 665 2,175 98% 660
400 1,340 410 1,385 103% 400
1,320 665 1,300
50 155 103% 50
800 410 810 101%
VAV-2-7 6"Ø 0.40 50 150 50 105%155 103% 50 100 50 105
VAV-2-6 14"Ø 0.38
100% 50
100 50 105 105%
VAV-2-9 6"Ø 0.41 50 170 55 104%175 102% 50 120 55 125
VAV-2-8 6"Ø 0.33 50 150
100 50 100 100%
VAV-2-11 6"Ø 0.15 50 150 50 105%145 96% 50 100 50 105
VAV-2-10 6"Ø 0.27 50 150 50 150
100%
VAV-2-13 10"Ø 0.40 230 760 250 100%760 100% 230 460 250 460
VAV-2-12 10"Ø 0.45 215 710 220 700 98% 215
130 435 135 445 102% 130
430 220 430
90 295 98% 90
260 135 270 103%
VAV-2-15 6"Ø 0.65 120 400 130 104%405 101% 120 240 130 250
VAV-2-14 8"Ø 0.49
97% 420
180 100 190 105%
VAV-2-17 6"Ø 0.29 50 150 55 105%150 100% 50 100 55 105
VAV-2-16 6"Ø 0.53 90 300
840 455 800 95%
VAV-2-19 14"Ø 0.38 360 1,200 370 102%1,180 98% 360 720 370 740
VAV-2-18 14"Ø 0.39 420 1,400 455 1,360
310 300 300 96%
VAV-2-21 6"Ø 0.37 50 150 45
VAV-2-20 8"Ø 0.57 310 310 300 300 96% 310
95%
Remarks
145 96% 45 100 50 95
Terminal
Unit Room
Outlet
No.
Code Size
Effective
Area
Design Initial Final
Date 1-Oct-13 Unit AHU-2 Flow Spec -% 10% +% 10%
DIFFUSER & GRILLE TEST SHEET (SUPPLY)
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! 355 285 #DIV/0! 340 95%VAV-2-12 117 1 CD 12X12
#DIV/0! 355 305 #DIV/0! 360 101%VAV-2-12 117 2 CD 12X12
710 590 700Total VAV-2-12
#DIV/0! #DIV/0! #VALUE!
#DIV/0! 380 345 #DIV/0! 380 100%VAV-2-13 118 3 CD 12X12
#DIV/0! 380 330 #DIV/0! 380 100%VAV-2-13 118 4 CD 12X12
760 675 760Total VAV-2-13
#DIV/0! #DIV/0! #VALUE!
#DIV/0! 435 475 #DIV/0! 445 102%VAV-2-14 119 5 CD 15X15
435 475 445Total VAV-2-14
#DIV/0! #DIV/0! #VALUE!
#DIV/0! 350 315 #DIV/0! 350 100%VAV-2-18 116 6 CD 12X12
#DIV/0! 350 285 #DIV/0! 330 94%VAV-2-18 116 7 CD 12X12
#DIV/0! 350 300 #DIV/0! 340 97%VAV-2-18 116 8 CD 12X12
#DIV/0! 350 300 #DIV/0! 340 97%VAV-2-18 116 9 CD 12X12
#DIV/0! #DIV/0! #VALUE!VAV-2-18 116 10 CD 12X12
1,400 1,200 1,360Total VAV-2-18
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!VAV-2-19 116 11 CD 12X12
#DIV/0! 400 280 #DIV/0! 390 97%VAV-2-19 116 12 CD 12X12
#DIV/0! 400 290 #DIV/0! 400 100%VAV-2-19 116 13 CD 12X12
#DIV/0! 400 280 #DIV/0! 390 97%VAV-2-19 116 14 CD 12X12
#DIV/0! #DIV/0! #VALUE!VAV-2-19 116 15 CD 12X12
1,200 850 1,180Total VAV-2-19
#DIV/0! #DIV/0! #VALUE!
#DIV/0! 310 300 #DIV/0! 300 96%VAV-2-20 HALLWAY 16 CD 12X12
310 300 300Total VAV-2-20
#DIV/0! #DIV/0! #VALUE!
#DIV/0! 150 45 #DIV/0! 145 96%VAV-2-21 SARAH 16A CD 8"Ø
150 45 145Total VAV-2-21
#DIV/0! #DIV/0! #VALUE!
#DIV/0! 150 210 #DIV/0! 150 100%VAV-2-17 OFFICE 48A CD 8"Ø
150 210 150Total VAV-2-17
#DIV/0! #DIV/0! #VALUE!
Remarks
(1) Deleted.
(2) Not installed.
#DIV/0! #DIV/0! #VALUE!
(1)
(2)
(1)
(1) Deleted.
#DIV/0! #DIV/0! #VALUE!
150 75 155Total VAV-2-7
#DIV/0! 150 75 #DIV/0! 155 103%VAV-2-7 122E 55 CD 8"Ø
#DIV/0! #DIV/0! #VALUE!
2,000 2,375 2,005Total VAV-2-2
#DIV/0! 500 580 #DIV/0! 535 107%VAV-2-2 134 36 CD 12"Ø
#DIV/0! 500 570 #DIV/0! 485 97%VAV-2-2 134 35 CD 12"Ø
#DIV/0! 500 625 #DIV/0! 510 102%VAV-2-2 134 34 CD 12"Ø
#DIV/0! 500 600 #DIV/0! 475 95%VAV-2-2 134 33 CD 12"Ø
#DIV/0! #DIV/0! #VALUE!
2,200 2,175 2,175Total VAV-2-4
#DIV/0! #DIV/0! #VALUE!VAV-2-4 134 36
#DIV/0! #DIV/0! #VALUE!VAV-2-4 134 35
#DIV/0! #DIV/0! #VALUE!VAV-2-4 134 34
#DIV/0! #DIV/0! #VALUE!VAV-2-4 134 33
#DIV/0! 450 440 #DIV/0! 440 97%VAV-2-4 135 32 CD 9X9
#DIV/0! 450 440 #DIV/0! 440 97%VAV-2-4 135 31 CD 9X9
#DIV/0! 650 640 #DIV/0! 640 98%VAV-2-4 135 30 CD 9X9
#DIV/0! 650 655 #DIV/0! 655 100%VAV-2-4 135 29 CD 9X9
#DIV/0! #DIV/0! #VALUE!
310 170 315Total VAV-2-3
#DIV/0! 310 170 #DIV/0! 315 101%VAV-2-3 HALLWAY 28 CD 12X12
#DIV/0! #DIV/0! #VALUE!
1,340 680 1,385Total VAV-2-6
#DIV/0! #DIV/0! #VALUE!VAV-2-6 122 27
#DIV/0! #DIV/0! #VALUE!VAV-2-6 122 26
#DIV/0! 260 40 #DIV/0! 250 96%VAV-2-6 123 25 CD 9X9
#DIV/0! 260 125 #DIV/0! 280 107%VAV-2-6 123 24 CD 9X9
#DIV/0! 260 65 #DIV/0! 270 103%VAV-2-6 123 23 CD 9X9
#DIV/0! 260 60 #DIV/0! 280 107%VAV-2-6 123 22 CD 9X9
#DIV/0! 100 135 #DIV/0! 105 105%VAV-2-6 120 21 CD 6X6
#DIV/0! 100 150 #DIV/0! 105 105%VAV-2-6 121 20 CD 6X6
#DIV/0! 100 105 #DIV/0! 95 95%VAV-2-6 133 19 CD 6X6
#DIV/0! #DIV/0! #VALUE!VAV-2-6 122 18
#DIV/0! #DIV/0! #VALUE!VAV-2-6 122 17
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
Date 30-Sep-13 Unit AHU-2 Flow Spec -% 10% +% 10%
DIFFUSER & GRILLE TEST SHEET (SUPPLY)
FPM CFM CFM FPM CFM
Terminal
Unit Room
Outlet
No.
Code Size
Effective
Area
Design Initial Final
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1) No balance damper.
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
360 270 350Total VAV-2-5
#DIV/0! 120 45 #DIV/0! 60 50%VAV-2-5 IT STORE 58 CD 8"Ø
#DIV/0! 120 125 #DIV/0! 160 133%VAV-2-5 IT STORE 57 CD 8"Ø
#DIV/0! 120 100 #DIV/0! 130 108%VAV-2-5 IT STORE 56 CD 8"Ø
#DIV/0! #DIV/0! #VALUE!
150 65 155Total VAV-2-8
#DIV/0! 150 65 #DIV/0! 155 103%VAV-2-8 122-D 54 CD 8"Ø
#DIV/0! #DIV/0! #VALUE!
170 175 175Total VAV-2-9
#DIV/0! 170 175 #DIV/0! 175 102%VAV-2-9 122-C 53 CD 8"Ø
#DIV/0! #DIV/0! #VALUE!
150 150 150Total VAV-2-10
#DIV/0! 150 150 #DIV/0! 150 100%VAV-2-10 122-B 52 CD 8"Ø
#DIV/0! #DIV/0! #VALUE!
150 70 145Total VAV-2-11
#DIV/0! 150 70 #DIV/0! 145 96%VAV-2-11 122-A 51 CD 8"Ø
#DIV/0! #DIV/0! #VALUE!
300 260 295Total VAV-2-16
#DIV/0! 150 130 #DIV/0! 145 96%VAV-2-16 116-C 50 CD 8"Ø
#DIV/0! 150 130 #DIV/0! 150 100%VAV-2-16 116-C 49 CD 8"Ø
#DIV/0! #DIV/0! #VALUE!
400 80 405Total VAV-2-15
#DIV/0! 200 35 #DIV/0! 195 97%VAV-2-15 DNL 48 CD 8"Ø
#DIV/0! 200 45 #DIV/0! 210 105%VAV-2-15 DNL 47 CD 8"Ø
#DIV/0! #DIV/0! #VALUE!
560 1,240 585Total VAV-2-1
#DIV/0! #DIV/0! #VALUE!VAV-2-1 138 46 CD 12X12
#DIV/0! #DIV/0! #VALUE!VAV-2-1 138 45 CD 12X12
#DIV/0! #DIV/0! #VALUE!VAV-2-1 138 44 CD 12X12
#DIV/0! #DIV/0! #VALUE!VAV-2-1 138 43 CD 12X12
#DIV/0! 300 570 #DIV/0! 305 101%VAV-2-1 126 42 CD 12X12
#DIV/0! 260 670 #DIV/0! 280 107%VAV-2-1 127 41 CD 12X12
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
Date 30-Sep-13 Unit AHU-2 Flow Spec -% 10% +% 10%
DIFFUSER & GRILLE TEST SHEET (SUPPLY)
FPM CFM CFM FPM CFM
Terminal
Unit Room
Outlet
No.
Code Size
Effective
Area
Design Initial Final
(1)
(1)
(1)
(1)
(1)
(1)
(1) Not applicable.
(2) Grille is removed due to new RTU that serves area.
(3) AHU-2 RA continued on next page.
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
11,125 6,885 6,885Total AHU-2 RA
#DIV/0! 400 35 #DIV/0! 35 8%AHU-2 RA 122 75 CR 12X12
#DIV/0! 400 50 #DIV/0! 50 12%AHU-2 RA 122 74 CR 12X12
#DIV/0! 200 25 #DIV/0! 25 12%AHU-2 RA 133 73 CR 10X10
#DIV/0! 100 25 #DIV/0! 25 25%AHU-2 RA 121 72 CR 10X10
#DIV/0! 100 0 #DIV/0! 0 0%AHU-2 RA 120 71 CR 10X10
#DIV/0! 400 65 #DIV/0! 65 16%AHU-2 RA 135 70 CR 12X12
#DIV/0! 400 115 #DIV/0! 115 28%AHU-2 RA 135 69 CR 12X12
#DIV/0! 100 25 #DIV/0! 25 25%AHU-2 RA 133 68 CR 10X10
#DIV/0! 520 55 #DIV/0! 55 10%AHU-2 RA 123 67 CR 12X12
#DIV/0! 520 215 #DIV/0! 215 41%AHU-2 RA 123 66 CR 12X12
#DIV/0! 260 75 #DIV/0! 75 28%AHU-2 RA 126 65 CR 10X10
#DIV/0! 260 50 #DIV/0! 50 19%AHU-2 RA 138 64 CR 10X10
#DIV/0! 370 - #VALUE! - #VALUE!AHU-2 RA 138 63 CR 18X18
#DIV/0! 370 - #VALUE! - #VALUE!AHU-2 RA 138 62 CR 18X18
#DIV/0! 120 - #VALUE! - #VALUE!AHU-2 RA 130 61 CR 10X10
#DIV/0! 100 - #VALUE! - #VALUE!AHU-2 RA 129 60 CR 10X10
#DIV/0! 400 350 #DIV/0! 350 87%AHU-2 RA 134 59 CR 12X12
#DIV/0! 400 205 #DIV/0! 205 51%AHU-2 RA 134 58 CR 12X12
#DIV/0! 310 1,970 #DIV/0! 1,970 635%AHU-2 RA HALLWAY 57 CR 20X20
#DIV/0! 435 85 #DIV/0! 85 19%AHU-2 RA 119 56 CR 12X12
#DIV/0! 380 70 #DIV/0! 70 18%AHU-2 RA 117 55 CR 20X20
#DIV/0! 760 90 #DIV/0! 90 11%AHU-2 RA 118 54 CR 18X18
#DIV/0! 585 30 #DIV/0! 30 5%AHU-2 RA 116 53 CR 20X20
#DIV/0! 585 115 #DIV/0! 115 19%AHU-2 RA 116 52 CR 20X20
#DIV/0! 585 70 #DIV/0! 70 11%AHU-2 RA 116 51 CR 20X20
#DIV/0! 585 430 #DIV/0! 430 73%AHU-2 RA 116 50 CR 20X20
#DIV/0! 585 575 #DIV/0! 575 98%AHU-2 RA 116 49 CR 20X20
#DIV/0! 585 870 #DIV/0! 870 148%AHU-2 RA 116 48 CR 20X20
#DIV/0! 310 1,290 #DIV/0! 1,290 416%AHU-2 RA HALLWAY 47 CR 20X20
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
Date 10-Oct-13 Unit AHU-2 Flow Spec -% 10% +% 10%
DIFFUSER & GRILLE TEST SHEET (RETURN)
FPM CFM CFM FPM CFM
Terminal
Unit Room Inlet No. Code Size
Effective
Area
Design Initial Final
(2)
(1)
(1)
(2)
(3)
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
0 825 825Total AHU-2 RA
#VALUE! DNL 60 #DIV/0! 60 #VALUE!AHU-2 RA 79 CR 6X6
#VALUE! DNL 0 #DIV/0! 0 #VALUE!AHU-2 RA 78 CR 6X6
#VALUE! DNL 0 #DIV/0! 0 #VALUE!AHU-2 RA 77 CR 6X6
#VALUE! DNL 30 #DIV/0! 30 #VALUE!AHU-2 RA 76 CR 6X6
#VALUE! DNL 95 #DIV/0! 95 #VALUE!AHU-2 RA 51A CR 6X6
#VALUE! DNL 125 #DIV/0! 125 #VALUE!AHU-2 RA 50A CR 6X6
#VALUE! DNL 515 #DIV/0! 515 #VALUE!AHU-2 RA 47A CR 10"Ø
#DIV/0! #DIV/0! #VALUE!
Date 10-Oct-13 Unit AHU-2 Flow Spec -% 10% +% 10%
DIFFUSER & GRILLE TEST SHEET (RETURN)
FPM CFM CFM FPM CFM
Terminal
Unit Room Inlet No. Code Size
Effective
Area
Date 10-Oct-13 Area Served GENERATOR ROOM Unit AHU-3
Total R/A CFM Inlets
Total Fan CFM
OutletsTotal S/A CFM
Method
Unit Information
Fan Identification AHU-3 Equipment MFG AAON INC
Equipment Location ROOF Model Number RN-018-3-0-EB09-142
Type/Size PACKAGED RTU Serial Number 200912-ANIN02644
Fan Data
Measurement
Traverse
Specified Actual Fan
6,200 5,901 Fan Sheave DIRECT DRIVE
6,200 6,410 Fan Shaft DIRECT DRIVE
DNL 5,901 Shaft C/C DIRECT DRIVE
O/A CFM DNL 509 Belt Size/Number DIRECT DRIVE
Inlet SP 0.49 Motor Shaft DIRECT DRIVE
Discharge SP 0.41 Sheave Adj. DIRECT DRIVE
Fan RPM DNL DNT Motor
TSP ESP 1.25" 0.90 Motor Sheave DIRECT DRIVE
Motor Data
Motor MFG. BALDOR Specified Actual
Pre / Final Filter ∆P 0.03 NONE Fixed Sheave
Control Set Point CONSTANT
Service Factor 1.15 Amperage 7.3 6.0 6.1 6.0
Motor HP 5.0 Voltage 460 434 433
Motor Frame# 215T Speed (VFD) 60 HZ 52 HZ
Temperature Data
Phase/Hz 3/60 Motor BHP DNL 4.17
Heater Size/Rating VFD SET Motor RPM 1160 DNT
Htg L.A.T. -
Fan Static Profile
Clg E.A.T. 71.3 Clg L.A.T. 50.6 Htg E.A.T. -
Remarks
OSA
SA RA
-0.29" -0.32" -0.49" +0.41"
RECTANGULAR TRAVERSE SHEET (SUPPLY)
Date 3-Oct-13 Unit AHU-3 Traverse No. 2 Traverse Location RETURN AIR
447 355
Point
No.
1 2 3 4 5
B 574 578 363 446
A 483 518
D
C
F
E
H
G
J
I
L
K
N
M
Total FPM ÷ No. of Readings = Avg. FPM
Sub
Total 1,057 1,096 810 801
X Area = Total CFM
3,764 8 471
X 71
Duct Size I.D. 30 X 72 Duct Size O.D. 29
12.528 5,901
Design Data Test Data
Remarks
(1) Fan at 52 HZ.
FPM 413 Area Sq. Ft. 12.528
CFM 6,200 Centerline S.P. In. W.C. N/A
X 71
Area Sq. Ft. 15.000 Duct Size I.D. 29
Terminal
Unit Room
Outlet
No.
Code Size
Effective
Area
Design Initial Final
Date 9-Sep-13 Unit AHU-3 Flow Spec -% 10% +% 10%
DIFFUSER & GRILLE TEST SHEET (SUPPLY)
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! 1,200 1,230 #DIV/0! 1,230 102%AHU-3 1 CD 21X21
#DIV/0! 1,200 1,245 #DIV/0! 1,245 103%AHU-3 2 CD 21X21
#DIV/0! 200 210 #DIV/0! 210 105%AHU-3 3 CD 9X9
#DIV/0! 1,200 1,215 #DIV/0! 1,215 101%AHU-3 4 CD 21X21
#DIV/0! 1,200 1,260 #DIV/0! 1,260 105%AHU-3 5 CD 21X21
#DIV/0! 1,200 1,250 #DIV/0! 1,250 104%AHU-3 6 CD 21X21
6,200 6,410 6,410Total AHU-3
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
Remarks
Remarks (1) DESIGN CFM TO BE DETERMINED BY THE TECHNICIAN DURING TESTING & BALANCING.
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
0 5,753 5,901Total AHU-3 RA
#VALUE! DNL 5,753 #DIV/0! 5,901 #VALUE!AHU-3 RA 7 CR 30X72
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
Date 3-Oct-13 Unit AHU-3 Flow Spec -% 10% +% 10%
DIFFUSER & GRILLE TEST SHEET (RETURN)
FPM CFM CFM FPM CFM
Terminal
Unit Room Inlet No. Code Size
Effective
Area
VFD at 52 HZ.
FPM 472 Area Sq. Ft. 12.534
CFM 6,200 Centerline S.P. In. W.C. DNT
X 71
Area Sq. Ft. 13.149 Duct Size I.D. 29 X 71
Duct Size I.D. 30 X 72 Duct Size O.D. 29
5,753
Design Data Test Data
Area = Total CFM
3,668 8 459 12.534
Total FPM ÷ No. of Readings = Avg. FPM X
Sub
Total 980 1,068 831 789
N
M
L
K
J
I
H
G
F
E
D
C
B 536 590 361 335
A 444 478 470 454
6 7 8 9 10 11 Point
No.
1 2 3 4 5
RECTANGULAR TRAVERSE SHEET
Date 3-Oct-13 Unit AHU-3 Traverse No. 1 Traverse Location RETURN AIR
(1) No suitable location for duct traverse.
Remarks
Htg L.A.T.
Fan Static Profile
Clg E.A.T. Clg L.A.T. Htg E.A.T.
Motor Frame# 56 HZ Speed (VFD) 1725
Temperature Data
Phase/Hz 3/60 Motor BHP DNL
Heater Size/Rating TP Motor RPM 1725 1745
Service Factor 1.15 Amperage 9.4 / 4.7 3.8 3.8 4.2
Motor HP 3 Voltage 230 / 460 483 483
Motor Data
Motor MFG. CENTURY Specified Actual
Pre / Final Filter ∆P - 0.07 Fixed Sheave
Control Set Point CONSTANT VOLUME
Inlet SP 0.37 Motor Shaft 7/8
Discharge SP 0.78 Sheave Adj. MAX
Fan RPM DNL 1,217 Motor
TSP ESP 0.50 1.15 Motor Sheave 1VL44
2,400 2,540 Fan Shaft 1"
1,920 0 Shaft C/C 10-1/2"
O/A CFM 480 Belt Size/Number A36
Serial Number N1M0512710
Fan Data
Measurement
DNT
Specified Actual Fan
2,400 DNT Fan Sheave AK 56
AIR MOVING EQUIPMENT DATA
Date 2-Oct-13 Area Served DTCC ROOM 128 Unit RTU-1
Total R/A CFM Traverse
Total Fan CFM
OutletsTotal S/A CFM
Method
Unit Information
Fan Identification RTU-1 Equipment MFG YORK
Equipment Location ROOF Model Number ZF072E15T4KZZ10001A
Type/Size PACKAGE RTU
(1)
OSA
SA RA
-0.37" -0.45" -1.01" +0.78"
#VALUE!
#VALUE!
#DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #VALUE!
#DIV/0! #VALUE!
#VALUE!
#DIV/0! #VALUE!
#DIV/0! #DIV/0!
#DIV/0! #DIV/0! #VALUE!
Total RTU-1 2,400
#DIV/0!
2,540
#DIV/0! #DIV/0!
#DIV/0!
Remarks
#DIV/0! 640
#DIV/0! #VALUE!
#DIV/0!
#DIV/0!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #VALUE!
#VALUE!
#DIV/0! #DIV/0! #VALUE!
#VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0! 640 106%RTU-1 128 4 CD 12"Ø #DIV/0! 600 640
RTU-1 128 2 CD 12"Ø
Date 2-Oct-13 Unit RTU-1 Flow Spec -% 10% +% 10%
DIFFUSER & GRILLE TEST SHEET (SUPPLY)
Terminal
Unit Room
Outlet
No.
Code Size
Effective
Area
Design Initial Final
FPM CFM CFM FPM CFM
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#VALUE!
#DIV/0! #VALUE!
#DIV/0! 625 104%
#DIV/0!
#DIV/0! 600 625
2,540
#DIV/0! 600 640 106%
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0! #DIV/0!
#DIV/0! #DIV/0!
#DIV/0!
#DIV/0! 635 105%RTU-1 128 1 CD 12"Ø #DIV/0! 600 635
RTU-1 128 3 CD 12"Ø
#DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0!
#DIV/0! #VALUE!
#DIV/0! #VALUE!
#DIV/0!
#DIV/0!
#DIV/0! #VALUE!#DIV/0!
Date 2-Oct-13 Area Served COMPUTER RM 123 Unit CR-1-2
Total R/A CFM Traverse
Total Fan CFM
OutletsTotal S/A CFM
Method
Unit Information
Fan Identification CR-1-2 Equipment MFG DATA AIRE INC
Equipment Location COMPUTER ROOM 123 Model Number DAAD 2034
Type/Size CRAC UNIT Serial Number 2007-1708-E
Fan Data
Measurement
Traverse
Specified Actual Fan
8,000 9,189 Fan Sheave 2BX80H
8,000 9,189 Fan Shaft H1"
9,500 9,189 Shaft C/C 9"
O/A CFM 0 0 Belt Size/Number B35X2
Inlet SP 0.013 Motor Shaft 1-1/8"
Discharge SP 0.0023 Sheave Adj. MID
Fan RPM DNL 1,004 MAB450
TSP ESP 0.50 0.015 Motor Sheave MAB450
Motor Data
Motor MFG. LEESON Specified Actual
Pre / Final Filter ∆P - 0.27 Fixed Sheave
Control Set Point CONSTANT VOLUME
Service Factor 1.15 Amperage 11.0 8.9 8.9 8.7
Motor HP 7.5 Voltage 460 483 483
Motor Frame# 215 TY Speed (VFD) 1760 -
Temperature Data
Phase/Hz 3/60 Motor BHP DNL 6.0
Heater Size/Rating FUSE Motor RPM 1760 1777
Htg L.A.T. -
Fan Static Profile
Clg E.A.T. Clg L.A.T. Htg E.A.T. -
(1) The design airflow of the CRAC units on the mechanical schedule is not compatible with the existing CRAC units cooling tonage. The airflow was recalculated to match equipment cooling tonage.
Remarks
(1)
OSA
SA RA
-0.013" -0.29" -1.11" +0.0023"
#DIV/0! #VALUE!
#DIV/0! #VALUE!
#DIV/0!
#DIV/0!
#DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0!
CR-1-2 123 1 INLET 24.75X89 15.29
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0! #DIV/0!
#DIV/0! #DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#VALUE!
#DIV/0!
#DIV/0! #VALUE!
#DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #VALUE!
601 9,189 114%523 8,000 9,189
#DIV/0!
Terminal
Unit Room
Outlet
No.
Code Size
Effective
Area
Design Initial Final
FPM CFM CFM FPM CFM
Date 2-Oct-13 Unit CR-1-2 Flow Spec -% 10% +% 10%
DIFFUSER & GRILLE TEST SHEET (SUPPLY)
#DIV/0!
#DIV/0!
#VALUE!
#DIV/0! #DIV/0! #VALUE!
#VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #VALUE!#DIV/0!
#DIV/0!
#DIV/0!
Remarks
9,189
#DIV/0! #VALUE!
#DIV/0!
9,189
#DIV/0! #DIV/0!
#DIV/0!
#DIV/0! #DIV/0! #VALUE!
Total CR-1-2 8,000
#DIV/0! #DIV/0! #VALUE!
#VALUE!
#DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #VALUE!
#DIV/0! #VALUE!
#VALUE!
#DIV/0! #VALUE!
#DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0!
(1) The design airflow of the CRAC units on the mechanical schedule is not compatible with the existing CRAC units cooling tonage. The airflow was recalculated to match equipment cooling tonage.
Remarks
Htg L.A.T. -
Fan Static Profile
Clg E.A.T. Clg L.A.T. Htg E.A.T. -
Motor Frame# 215 TY Speed (VFD) 1760 -
Temperature Data
Phase/Hz 3/60 Motor BHP DNL 3.24
Heater Size/Rating FUSE Motor RPM 1760 1776
Service Factor 1.15 Amperage 11.0 4.8 4.8 4.7
Motor HP 7.5 Voltage 460 483 483
Motor Data
Motor MFG. LEESON Specified Actual
Pre / Final Filter ∆P - 0.15 Fixed Sheave
Control Set Point CONSTANT VOLUME
Inlet SP 0.01 Motor Shaft 1-1/8"
Discharge SP 0.0023 Sheave Adj. MID
Fan RPM DNL 862 MAB450
TSP ESP 0.50 0.0024 Motor Sheave MAB450
8,000 7,430 Fan Shaft H1"
8,000 7,430 Shaft C/C 9"
O/A CFM 0 0 Belt Size/Number B35X2
Serial Number 2004-1413-A
Fan Data
Measurement
Traverse
Specified Actual Fan
8,000 7,430 Fan Sheave 2BX80H
AIR MOVING EQUIPMENT DATA
Date 2-Oct-13 Area Served COMPUTER RM 123 Unit CR-1-3
Total R/A CFM Traverse
Total Fan CFM
OutletsTotal S/A CFM
Method
Unit Information
Fan Identification CR-1-3 Equipment MFG DATA AIRE INC
Equipment Location COMPUTER ROOM 123 Model Number DAAD 2034
Type/Size CRAC UNIT
(1)
OSA
SA RA
-0.01" -0.16" -0.63" +0.0023"
#DIV/0! #DIV/0! #VALUE!
#DIV/0!
#VALUE!
#VALUE!
#DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #VALUE!
#DIV/0! #VALUE!
#VALUE!
#DIV/0! #VALUE!
#DIV/0! #DIV/0!
#DIV/0! #DIV/0! #VALUE!
Total CR-1-3 8,000
#DIV/0!
7,430
#DIV/0! #DIV/0!
#DIV/0!
Remarks
7,430
#DIV/0! #VALUE!
#DIV/0!
#DIV/0!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #VALUE!
#VALUE!
#DIV/0! #DIV/0! #VALUE!
#VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0!
#DIV/0!
Date 2-Oct-13 Unit CR-1-3 Flow Spec -% 10% +% 10%
DIFFUSER & GRILLE TEST SHEET (SUPPLY)
Terminal
Unit Room
Outlet
No.
Code Size
Effective
Area
Design Initial Final
FPM CFM CFM FPM CFM
#VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #VALUE!
486 7,430 92%523 8,000 7,430
#DIV/0!
#VALUE!
#DIV/0!
#DIV/0! #VALUE!
#DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0! #DIV/0!
#DIV/0! #DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
CR-1-3 123 1 INLET 24.75X89 15.29
#DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0!
#DIV/0! #VALUE!
#DIV/0! #VALUE!
#DIV/0!
#DIV/0!
(1) The design airflow of the CRAC units on the mechanical schedule is not compatible with the existing CRAC units cooling tonage. The airflow was recalculated to match equipment cooling tonage.
Remarks
Htg L.A.T. -
Fan Static Profile
Clg E.A.T. Clg L.A.T. Htg E.A.T. -
Motor Frame# 184T Speed (VFD) 1760 -
Temperature Data
Phase/Hz 3/60 Motor BHP DNL 4.07
Heater Size/Rating FUSE Motor RPM 1760 1778
Service Factor 1.15 Amperage 6.5 5.4 5.4 5.0
Motor HP 5 Voltage 460 483 484
Motor Data
Motor MFG. DAYTON Specified Actual
Pre / Final Filter ∆P - 0.31 Fixed Sheave
Control Set Point CONSTANT VOLUME
Inlet SP 0.011 Motor Shaft 1-1/8"
Discharge SP 0.0023 Sheave Adj. MID
Fan RPM DNL 663 MAB450
TSP ESP 0.50 0.013 Motor Sheave 2VP60
9,500 9,014 Fan Shaft H 1-3/16"
9,500 9,014 Shaft C/C 9-1/2"
O/A CFM 0 0 Belt Size/Number B43/2
Serial Number C07H010077
Fan Data
Measurement
Traverse
Specified Actual Fan
9,500 9,014 Fan Sheave 2BK110
AIR MOVING EQUIPMENT DATA
Date 2-Oct-13 Area Served COMPUTER RM 123 Unit CR-1-1
Total R/A CFM Traverse
Total Fan CFM
OutletsTotal S/A CFM
Method
Unit Information
Fan Identification CR-1-1 Equipment MFG LEIBERT
Equipment Location COMPUTER ROOM 123 Model Number DH245A-AA016507
Type/Size CRAC UNIT
(1)
OSA
SA RA
-0.011" -0.32" -0.89" +0.0023"
#DIV/0! #DIV/0! #VALUE!
#DIV/0!
#VALUE!
#VALUE!
#DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #VALUE!
#DIV/0! #VALUE!
#VALUE!
#DIV/0! #VALUE!
#DIV/0! #DIV/0!
#DIV/0! #DIV/0! #VALUE!
Total CR-1-1 9,500
#DIV/0!
9,014
#DIV/0! #DIV/0!
#DIV/0!
Remarks
9,014
#DIV/0! #VALUE!
#DIV/0!
#DIV/0!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #VALUE!
#VALUE!
#DIV/0! #DIV/0! #VALUE!
#VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0!
#DIV/0!
Date 2-Oct-13 Unit CR-1-2 Flow Spec -% 10% +% 10%
DIFFUSER & GRILLE TEST SHEET (SUPPLY)
Terminal
Unit Room
Outlet
No.
Code Size
Effective
Area
Design Initial Final
FPM CFM CFM FPM CFM
#VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0! #VALUE!
638 9,014 94%672 9,500 9,014
#DIV/0!
#VALUE!
#DIV/0!
#DIV/0! #VALUE!
#DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
#DIV/0! #DIV/0!
#DIV/0! #DIV/0!
#DIV/0!
#DIV/0!
#DIV/0!
CR-1-1 123 1 INLET 22X92.5 14.13
#DIV/0! #VALUE!
#DIV/0! #DIV/0! #VALUE!
#DIV/0!
#DIV/0! #VALUE!
#DIV/0! #VALUE!
#DIV/0!
#DIV/0!
Htg L.A.T. -
Fan Static Profile
Clg E.A.T. 71.7 Clg L.A.T. 42.6 Htg E.A.T. -
Motor Frame# Speed (VFD) - -
Temperature Data
Phase/Hz 3/60 Motor BHP DNL 1.93
Heater Size/Rating TP Motor RPM 1725 1728
Service Factor 1.15 Amperage 3.1 3.0 3.0 2.8
Motor HP 2 Voltage 460 482 482
Motor Data
Motor MFG. EMERSON Specified Actual
Pre / Final Filter ∆P - 0.39 Fixed Sheave
Control Set Point CONSTANT VOLUME
Inlet SP 0.41 Motor Shaft 7/8
Discharge SP 0.14 Sheave Adj. MID
Fan RPM DNL 836 MAB450
TSP ESP 0.5 0.55 Motor Sheave 1VP50
3,750 9,189 Fan Shaft H1
3,905 9,189 Shaft C/C 20-3/4"
O/A CFM - - Belt Size/Number B52
Serial Number 1046N205949
Fan Data
Measurement
Traverse
Specified Actual Fan
3,905 3,905 Fan Sheave BX95
AIR MOVING EQUIPMENT DATA
Date 5-Dec-13 Area Served ROOM 134 Unit CR-2-2
Total R/A CFM Traverse
Total Fan CFM
OutletsTotal S/A CFM
Method
Unit Information
Fan Identification CR-2-2 Equipment MFG LIEBERT
Equipment Location 134 Model Number MMD96E2AHOLB
Type/Size FAN COIL
SA RA
-0.41" -0.80" -1.20" +0.14"
#DIV/0! #DIV/0! #VALUE!
#DIV/0!
#VALUE!
#VALUE!
#DIV/0!
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it.