Reagan_Test_Site_PWS_30SEP2016_DRAFT_-_APPROVED_FOR_RELEASE_RELEASE.pdf

W9113M-15-R-0007 Attachment 001

APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED - SMDC #6140, 11OCT2016 Page i

PERFORMANCE WORK STATEMENT (PWS)

For

REAGAN TEST SITE (RTS)

ENGINEERING AND TECHNICAL SERVICES (RETS)

DRAFT

30 September 2016

Prepared by:

USASMDC/ARSTRAT

Redstone Arsenal, AL

NOTE: Procuring Contracting Officer’s (PCO) Authority. The PCO is the only person authorized to approve changes in any of the requirements under this PWS and any provisions contained elsewhere in this contract. In the event the contractor implements any such change at the direction of any person other than the PCO, the change will be considered to have been made without Government authority.

APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED - SMDC #6140, 11OCT2016 Page ii

1.0 Scope

2.0 Background

3.0 Performance Requirements

3.1 RTS Test Mission Services (TMS) and Instrumentation Modifications

3.1.1 RTS TMS

3.1.1.1 RTS Program Planning Support

3.1.1.2 RTS Customer Mission Estimating

3.1.1.3 Provide Mission Test Planning

3.1.1.4 Post Mission Support

3.1.1.5 RTS Instrumentation/Systems Operations

3.1.1.6 TMS Support Functions

3.1.2 RTS Instrumentation Modifications

3.1.2.1 Engineering Change Proposals (ECP) for Instrumentation Modifications

3.1.2.2 Instrumentation Modifications

3.1.2.3 Modification Completion Final Reports

3.2 RTS Standard Technical Services (STS)

3.2.1 RTS Space Operations

3.2.2 RTS Instrumentation/System Maintenance

3.2.3 RTS Mission Comms/IT Services

3.2.4 STS Support Functions

3.2.4.1 STS Systems Engineering Support

3.2.4.2 RTS Launch Ordnance and Hazardous Operations (HAZOP)

3.2.4.3 RTS Work Center for RTS Technical Facility Maintenance

3.2.4.4 RTS Calibration Lab Support

3.2.4.5 RF Safety for RTS Instrumentation

APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED - SMDC #6140, 11OCT2016 Page iii

3.2.4.6 RTS Environmental Support

3.2.4.7 Unexploded Ordnance (UXO) Handling and Disposal

3.2.4.8 RTS Security Management

3.2.4.9 RTS Mission Specific Kwajalein Installation (Logistics) Support Coordination .. 31

3.2.4.10 Financial Resource Management

3.2.4.11 RTS Government Property Management

3.2.4.12 Configuration Management

3.3 Transition

4.0 General Requirements

4.1 Contract Administration and Management

4.2 Subcontract Management

4.3 Contractor Personnel, Disciplines, and Specialties

4.4 Location and Hours of Work

4.5 Travel / Temporary Duty

4.6 Program Management

4.7 RTS Supply Services

5.0 Special Requirements

5.1 Security

5.2 Industrial Safety

5.3 Environmental

6.0 Deliverables

7.0 Government Furnished Assets

8.0 Quality

8.1 Quality Control

8.2 Quality Assurance Surveillance Plan

APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED - SMDC #6140, 11OCT2016 Page iv

9.0 Contract Manpower Reporting (CMR)

9.1 CMR Reporting Process

9.2 CMR Reporting Details

10.0 Applicable Directives

11.0 Identification of Contractor Employees

12.0 Acronym List

APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED - SMDC #6140, 11OCT2016 Page 1

Performance Work Statement (PWS) For

Reagan Test Site (RTS) Engineering and Technical Services (RETS)

1.0 Scope

This Performance Work Statement (PWS) identifies the engineering and technical services tasks the contractor shall perform to support operations and missions for Reagan Test Site (RTS). The contractor shall provide all labor, materials, equipment, travel and all else necessary to satisfy the RTS engineering and technical support (RETS) requirement of this PWS. Access to standard Garrison services will be provided to contractor personnel as described in Attachment (to be identified prior to RFP)

RETS higher level objectives are categorized as: Test Mission Services (TMS) and

Instrumentation Modifications or Standard Technical Services (STS). Test mission preparation and operations and RTS Instrumentation Modifications are categorized as

TMS and Instrumentation Modification. RTS operations conducted in support of RTS range readiness (to include: RTS instrumentation maintenance, RTS network maintenance, instrumentation calibration, security, environmental, and logistics coordination support), as well as RTS space operations are categorized as STS.

2.0 Background

RTS is an activity of the Department of Defense (DoD) Major Range and Test Facility Base (MRTFB), whose purpose is to execute and report on theater and strategic offensive and defensive ballistic missile testing and support space operations and experiments from the Kwajalein Atoll, in the Republic of the Marshall Islands (RMI), and from the RTS Operations Center in Huntsville, Alabama, using a wide array of highly sophisticated radar, telemetry, and optical sensors to meet the needs of the DoD in defending the Nation and its interests.

RTS is also a United States Anti-Ballistic Missile (ABM) Test Range, and a Defense Site, pursuant to the Compact of Free Association, Public Law 99-239, with the RMI.

RTS is located in the Kwajalein Atoll, RMI, approximately 2,136 nautical miles west-southwest of Honolulu, Hawaii. Kwajalein Atoll is a crescent shaped loop of coral islands whose attendant reef encloses an area of 1,100 square miles - the world's largest lagoon. From Kwajalein Island on the southern reef to Ebadon Island on the northwest corner of the reef is approximately 75 miles. The lagoon is 15 miles across at its widest point. RTS is comprised of technical and support facilities located on eleven, low-lying tropical islands, utilized by the U.S. under the terms of the Compact of Free Association with the RMI. During test operations, the RTS operational Area of Responsibility (AOR) expands to include an area within a radius of approximately 500 nautical miles of Kwajalein Island and also Wake Island, which is located approximately

APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED - SMDC #6140, 11OCT2016 Page 2

700 miles north of Kwajalein Atoll and which contains a complex of instrumentation that is used to support testing activities on a campaign basis.

RTS is the Primary Organizational Element (POE) for technical support services provided by separate contractors for RTS Engineering and Technical Services (RETS) and Meteorological Support Services (MSS). RTS is a U.S. Army Space and Missile Defense Command (USASMDC) organization consisting of the Office of RTS Director, which includes the Technical Director; the Mission Operations Division; Safety Division;

Space Operations Division; and program management support all headquartered in Huntsville, Alabama at the RTS Operations Center - Huntsville (ROC-H). RTS on-island presence consists of the Office of the Range Director, an engineering and maintenance element, and a Communications and Networking Division. RTS receives scientific advice from a Federally Funded Research and Development Center (FFRDC) contracted through the U.S. Air Force. RETS are necessary to meet a continuing need for research, development, test and evaluation (RDT&E) efforts for on-site and off-site engineering, technical support services, and materials required to operate, maintain, analyze, and modify the Ranges instrumentation and related support systems. The RTS instrumentation includes, but is not limited to, highly sophisticated one-of-a-kind, state-of-the-art radar systems designed for collection of precise metric, imaging, and signature data; additional radar metric and impact location assets; telemetry data acquisition systems; and optics capabilities for highly accurate metrics, spectral characteristics, documentary video and photography, and scoring data, command and control centers, herein after referred to as RTS instrumentation (a detailed listing is provided in the RTS Instrumentation Support Facilities Manual (ISFM)). The RETS effort includes a variety of technical support services from which RTS and RTS customers (RTS customers can include both DoD users (including DoD training users), and Non-DoD Users such as U.S. Government Agencies, State and local Governments, allied foreign Governments, and commercial entities as defined by DoDI 3200.11), can select, to include:

Operation and maintenance of communications systems that provide data, voice, timing, and control circuits for conducting test programs at RTS, along with routine administrative communication needs;

Electro-magnetic frequency control, surveillance, and analysis;

Timing reference, synchronization, and control;

Photographic and video services;

Ordnance receipt, inventory, handling, and storage;

Communications Security (COMSEC) equipment receipt, inventory, and control;

APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED - SMDC #6140, 11OCT2016 Page 3

Calibration, repair, and maintenance of Test, Measurement, and Diagnostic Equipment (TMDE);

Mission planning and preparation to include evaluation of mission requirements, development of mission support plans and operational planning documents, preparation of operations schedules, and the adaptation of procedures as required to successfully support mission requirements; and, Design, implementation, testing, and documentation of hardware and software modifications to the instrumentation and technical support systems in order to maintain the state-of-the-art capability required by the complex RDT&E missions supported by

RTS.

3.0 Performance Requirements

The following section specifies the Performance Objectives and Performance Elements for the RETS contract.

3.1 RTS Test Mission Services (TMS) and Instrumentation Modifications

Objective: Provide RTS technical services in direct support of RTS test mission customers and provide engineering support for execution of RTS instrumentation modifications.

3.1.1 RTS TMS

Objective: RTS TMS consist of RTS program planning support, performing estimating and billing functions relative to customer missions, all mission test planning, test mission execution, post–mission support, and mission support at extended areas of operations.

3.1.1.1 RTS Program Planning Support

Objective: Perform program test planning, develop mission documentation, and perform special studies as required to ensure that all customer requirements are identified and satisfied through comprehensive support plans documented per the Universal Documentation System (UDS). Provide timely, innovative, cost-effective program and mission support concepts that meet all documented requirements. These functions are to be performed in coordination with the Governmental RTS mission planning and operations organization(s) located primarily in Huntsville, Alabama.

3.1.1.1.1 Requirements Analysis

The contractor shall evaluate requirements as identified in customer provided documentation, to include UDS, and identify resources required to collect the data to

APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED - SMDC #6140, 11OCT2016 Page 4 satisfy customer requirements. Customer provided UDS documents include the Program Introduction (PI), Program Requirements Document (PRD) and Operations Requirement (OR) and associated operation extracts/supplements/addendums/MOA’s/MOU.

3.1.1.1.2 UDS Documentation

The contractor shall prepare UDS documentation based on the requirements analysis results which includes the consolidation of all RTS contractor comments with comments received from the Government and other Government authorized agencies and prepare the appropriate UDS (to include the Statement of Capability (SC), Program Support Plan (PSP), and the Operations Directive (OD)), and/or other response documentation as necessary. Also prepare and submit schedules for the review and preparation of UDS documentation. (CDRL A014)

The contractor shall ensure UDS documents are: Accurate; Complete and Timely IAW CDRL requirements; Delivered IAW prescribed UDS timelines.

3.1.1.1.3 RTS Mission Planning Package

The contractor shall deliver briefing charts / presentations in accordance with (IAW) the CDRL A045 requirements in fulfillment of the requirements of this section.

The contractor shall ensure Mission Planning packages are: Accurate; Complete and Timely IAW CDRL requirements; Delivered IAW prescribed UDS timelines.

3.1.1.1.4 RTS Range User’s Manual

The contractor shall maintain, update and provide the RTS Range User’s Manual (RUM). The RUM provides a comprehensive document delineating how a new or existing customer interfaces with the RTS. The document, as a minimum, will contain details on how requirements are levied on the range, how the range responds to customer requirements, range support timelines, and cost estimate and billing policies.

(CDRL A015)

3.1.1.1.5 RTS Data Item Description Manual

The contractor shall maintain, update and provide RTS Data Item Description Manual.

This manual delineates standard data products that are available from RTS. This document is given to existing and potential range users/customers for program/mission planning purposes. The data from this manual includes information received as input from other technical contractors supporting RTS as provided by the Government.

(CDRL A016)

3.1.1.1.6 RTS Operations Planning Document

APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED - SMDC #6140, 11OCT2016 Page 5

The contractor shall prepare and provide the RTS Operations Planning Document IAW CDRL requirements. (CDRL A017).

3.1.1.1.7 RTS Range Safety System (RSS) Mission Planning Support

The contractor shall provide all mission test planning, develop mission documentation, perform special studies, and provide configuration recommendations and readiness reporting for Range Safety system(s) necessary for successful and safe execution of missions performed at RTS or by RTS personnel. This includes preparation of an RSS Mission Support Plan (CDRL A046), RSS Readiness Report (CDRL A047), and RSS Countdown Procedures (CDRL A048).

The contractor shall ensure all areas where RTS capabilities cannot meet user or range safety requirements are identified and recommended safety system configuration adequately satisfies all mission requirements and allows for safe mission execution.

3.1.1.2 RTS Customer Mission Estimating

Objective: Support Government cost estimation process by providing mission resource estimate inputs. These efforts are to be performed in support of the RTS organization in Huntsville, AL.

3.1.1.2.1 RTS Customer Resource Estimates Inputs

The contractor shall determine mission support resource estimate inputs to include work-hours, material costs and other direct costs, based on requirements provided by range customer documented with the UDS system or other requirements type documentation such as letters and/or MOAs & MOUs. The contractor shall document and deliver resource estimates using the Program Cost Estimates document IAW CDRL A018.

The contractor shall ensure Mission Cost Estimates are: Determined for each instrumentation /system required for customer mission support; determined for all logistical support required for customer mission support.

3.1.1.3 Provide Mission Test Planning

Objective: Provide all mission test planning, documentation development and support to Integrated Product Teams (IPTs) to ensure that all customer requirements are satisfied through a comprehensive mission testing process. Provide timely, innovative and cost-effective mission test planning concepts that meet all documented technical requirements.

3.1.1.3.1 Mission Schedule

APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED - SMDC #6140, 11OCT2016 Page 6

The contractor shall provide the Planning and Operations Schedule for both annual and short term missions IAW CDRL A017 and A019 requirements.

3.1.1.3.2 Mission Execution Files

The contractor shall develop mission execution files for the RTS instrumentation. The contractor shall prepare, test and modify mission execution files as follows:

a. Radar mission profile, consisting of a radar configuration file, classifier initialization file and autotasker file for each of the RTS radars;

b. A simulation file that defines the target scene and the radar parameters for each of the radars;

c. A mission planning workstation "recall" file that permits changes to be made to the files as necessary;

d. Huntsville Mission Control Center (HMCC) operation files (nominal (expected mission profile), graphics initializations, Radar Cross Section (RCS) profiles and auto-ID information);

e. Optics test plan to collect all required data;

f. Telemetry test plan to collect all required data; and,

g. Off nominal (deviations from the nominal) for mission preparation/practice.

3.1.1.3.3 Mission Test Documentation

The contractor shall prepare and modify as appropriate all mission test documentation so that all such documentation accurately and completely identifies all mission essential instrumentation and the roles of that instrumentation in support of RTS missions. The contractor shall include mission test plans and schedules, necessary to ensure all customer requirements are satisfied. (CDRLs A014 and A045)

3.1.1.3.4 Working Groups

The contractor shall provide technical expertise for and participation in Government established working groups as necessary to identify RSS requirements, resolve mission planning issues and develop lessons learned and determine root cause for failure to meet mission requirements.

3.1.1.4 Post Mission Support

APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED - SMDC #6140, 11OCT2016 Page 7

Objective: Support Test mission data preparation, transmission, and after action reviews.

3.1.1.4.1 On-Site Data Preparation and Data Transmission

The contractor shall perform any necessary data processing to prepare the data for transmission and transmit to Kwajalein Data Analysis Center (KDAC) or directly to customer agencies as determined by the mission documentation. The contractor shall provide mission data report to RTS to confirm data transmission (CDRL A022).

The contactor shall ensure data required to support RTS customers is collected / analyzed and provided to customers in accordance with documented test customer requirements.

3.1.1.4.2 “Quick Look” Data Analysis and Prepare Reports and/or

Presentations

The contractor shall prepare and transmit data to KDAC, or customers, perform Quick Look analysis, provide Quick Look Reports/Presentations as requested. The contractor shall perform any necessary data processing and analysis to support a Quick Look analysis. (CDRL A021)

3.1.1.4.3 After Action Reviews (AARs)

The contractor shall review data collected and assess the performance of the RTS Instrumentation in its data collection role, document any lessons learned as a result of execution of the mission, and present a post mission brief that summarizes RTS’s support of the mission. The contractor shall prepare and deliver the Mission Assessment Report and Range Safety Mission Assessment Report IAW CDRL (A049 and A050).

The contractor shall ensure mission Assessment and range Safety Mission Assessment Reports are:

1. Accurate;

2. Complete IAW requirements of the CDRL and the applicable Data Item Description;

3. Submitted for all missions.

4. Includes all identified lessons learned and AAR action items.

3.1.1.5 RTS Instrumentation/Systems Operations

Objective: Operate all RTS range instrumentation, according to mission test plans and schedules and collect the required data for each mission.

3.1.1.5.1 RTS Radar Operations

APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED - SMDC #6140, 11OCT2016 Page 8

The contractor shall operate all required RTS range radars according to mission test plans (IAW requirements defined in CDRL A014 and A045) and schedules (IAW requirements defined in CDRLs A045 and A019) and collect the required data for each mission.

3.1.1.5.2 RTS Optical Sensor Operations

The contractor shall operate all required RTS range optical sensors according to mission test plans (IAW CDRL A014 and A045) and schedules (IAW CDRLs A045/A019) and collect the required data for each mission.

3.1.1.5.3 RTS Telemetry Operations

The contractor shall operate all required RTS range telemetry systems according to mission test plans (IAW CDRL A014 and A045) and schedules (IAW CDRLs A045/A019) and collect the required data for each mission.

3.1.1.5.4 Command and Control Center Operations

The contractor shall operate all required Command and Control Centers (Huntsville Mission Control Center (HMCC) and Kwajalein Mission Control Center (KMCC), according to mission test plans (IAW CDRL A014/A045) and schedules (IAW CDRLs A045/A019) and collect the required data for each mission.

3.1.1.5.5 RTS Range Safety System Operations

The contractor shall operate all required RTS range safety systems (Range Safety Control Center (RSCC) to include Kwajalein and Roi Namur Command Destruct sub-systems), and the Kwajalein Mobile Range Safety System (KMRSS) ) according to mission test plans (IAW requirements defined in CDRL A014) and schedules (IAW CDRL A045/A019) and collect the required data for each mission. The only exception will be that the Missile Fight Control Officer(s) (MFCO) and Flight Termination System Officer (FTSO) range safety console positions during mission support activities will be manned by Government personnel.

The contractor shall ensure implementation of all safety system algorithms adequately satisfies all mission requirements and allows for safe mission execution.

3.1.1.5.6 Operate the RTS Mission Data Networks (MDN)

The contractor shall operate RTS MDN backbone for RTS instrumentation systems according to mission test plans (CDRL A014) and schedules (CDRLs A017 and A019).

The MDN backbone shall include all network routers, switches, cabling and ancillary equipment which transports data between RTS instrumentation/systems/sensors as defined in the ISFM and RTS Technical Facilities and Equipment Manual (TFEM). The

APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED - SMDC #6140, 11OCT2016 Page 9

MDN backbone is not a part of the baseline Comms/IT Information Management Systems (IMS) / networks (i.e. not part of NIPRNET/SIPRNET). There is one Classified MDN (RTSNet-C) and one Unclassified MDN (RTSNet-U).

3.1.1.6 TMS Support Functions

Objective: Provide TMS support services in direct support of RTS test missions. TMS support services include environmental, ground release of calibration sphere and meteorological rockets for calibration of instrumentation in direct support of test missions, explosive handling and launch ordnance, logistics coordination, and mission support at extended areas of operations.

3.1.1.6.1 Ground Release of Calibration Spheres to Support Test Mission

Requirements

The contractor shall prepare and launch spheres in support of RTS test mission customer requirements. The contractor shall ensure calibration spheres operations/launches are successfully conducted to meet schedule and requirements.

3.1.1.6.2 Explosive Handling Operations

The contractor shall conduct all operations involving receipt, transportation, storage and shipment of explosive materials (including rocket motors) in accordance with range and/or customer requirements as identified in mission test plans (CDRL A014) and schedules (CDRLs A015 and A019). The contractor shall ensure the following: All resources required are available to conduct all explosive handling operations. No explosive incidents in the conduct of these operations. Operations conducted IAW approved launch contractor procedures. All explosives work shall be performed by qualified/certified personnel.

3.1.1.6.3 Meteorological Rocket Launches

The contractor shall perform the launching of meteorological and sounding rockets in accordance with range and/or customer requirements. The contractor shall ensure Rocket launches conducted according to established schedule and rocket launches conducted safely according to Government approved procedures.

3.1.1.6.4 RTS and RTS Customers Compliance with the Environmental

Standards and Procedures

The contractor shall support and provide assistance to RTS and RTS customers in complying with United States Army Kwajalein Atoll (USAKA) Environmental Standards (UES) and associated requirements (e.g. Kwajalein Environmental Emergency Plan (KEEP)); Final Historic Preservation Plan, United States Army Kwajalein Atoll (HPP);

APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED - SMDC #6140, 11OCT2016 Page 10 and associated Army and DoD regulations, and Garrison SOPs). The contractor shall ensure RTS operations are in compliance with UES.

3.1.1.6.5 RTS Test Mission Installation Logistics and Baseline C4IM Support

The contractor shall review customer provided UDS documentation including Program Introduction (PI), Program Requirements Document (PRD), Operations Requirements (OR), and any other RTS accepted customer requirement documents. Review shall identify test mission installation support requirements and conveyance of same to installation support elements. The contractor shall collect each installation support element's support position and integrate into a single UDS response document. Review shall also identify any areas where customer requirements cannot be met. The contractor shall propose solutions and/or support alternatives for any requirements that cannot be met. Data from this task shall be integrated into CDRLs A014 and A046 as appropriate.

3.1.1.6.6 Logistics Cost Estimate Input for RTS Range Customer Missions

The contractor shall coordinate with Installation support elements and collect from each Installation support element's cost estimate input. The contractor shall consolidate Installation support cost estimate input with RTS mission support input and provide a single mission cost estimate input. Data from this task shall be integrated into CDRL A018 as appropriate.

3.1.1.6.7 Wake Island and Off Atoll Missions in Support of RTS TMS

The contractor shall operate, maintain, and calibrate RTS systems and associated equipment at Wake Island and other locations within the RTS AOR outside Kwajalein Atoll as part of RTS TMS.

3.1.2 RTS Instrumentation Modifications

Objective: Support RTS instrumentation modifications and engineering change proposals (ECPs) process.

3.1.2.1 Engineering Change Proposals (ECP) for Instrumentation

Modifications

The contractor shall develop an Engineering Change Proposal (ECP) IAW the Government approved contractor Configuration Management Plan (CMP) (CDRL A042) for each modification to RTS instrumentation and systems due to deficiencies in support of customer requirements, to improve capabilities, implement efficiencies, or as directed by the RTS Director. Large projects may require an overarching ECP with several supporting smaller ECPs. The ECP must contain, as a minimum, justification for the

APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED - SMDC #6140, 11OCT2016 Page 11 modification, identification of the requirement(s) that the modification will satisfy, the modification approach, testing methodology, initial operational capability (IOC)/full operational capability (FOC) criteria and date, identification of documentation/drawings effected, a proposed budget, and a schedule with milestones for progress tracking.

ECPs may be funded by several funding sources including customer, and I&M. ECPs must be approved prior to the start of any changes by RTS Technical Director and RTS Instrumentation engineers. (CDRL A031)

3.1.2.2 Instrumentation Modifications

The contractor shall perform minor and major modifications IAW an approved ECP (CDRL A031) for that modification.

The contractor shall ensure the following for each instrumentation project:

a. Project passes requirements, design and test readiness reviews (if they were planned and scheduled).

b. Project completed on schedule.

c. Modified system passed all acceptance tests before IOC and performs as expected after the modification is complete.

d. Material cost and labor within baseline estimate.

e. Documentation and drawings completed on schedule.

3.1.2.3 Modification Completion Final Reports

The contractor shall prepare a modification completion final report that describes the results of the modifications effort(s) (CDRL A028).

3.2 RTS Standard Technical Services (STS)

Objective: Provide RTS Standard Technical Services is support of RTS range readiness and space operations support.

3.2.1 RTS Space Operations

The contractor shall conduct space surveillance operations as tasked by USSTRATCOM as a contributing sensor to the U.S. Space Surveillance Network

(SSN).

3.2.1.1 Conduct Space Surveillance Operations

In support of DoD Space Surveillance Network (SSN) operations, when tasked by USSTRATCOM or its designated representative, the Joint Space Operations Center (JSpOC), as SSN contributing sensors, and in accordance with Strategic Command Directive (SD) 505-1 and in accordance with requirements stated in the Space Situational Awareness (SSA) Initial Capabilities Document (9 January 2012), APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED - SMDC #6140, 11OCT2016 Page 12 the contractor shall provide the following:

3.2.1.1.1 252 sensor hours per week of space surveillance operations when the prime Army Research Projects Agency (ARPA) Long Range Tracking and Instrumentation Radar (ALTAIR) and alternate Target Resolution Discrimination Experiment (TRADEX) space surveillance sensors are operational.

3.2.1.1.2 126 sensor hours per week of space surveillance operations when the prime or alternate sensor is conducting an extended maintenance shutdown.

3.2.1.1.3 ALTAIR and TRADEX operating hours shall be local solar noon +/- 9 hours, 7 days/week unless otherwise tasked by USSTRATCOM or its designated representative, JSpOC.

3.2.1.1.4 ALTAIR signal-to-noise ratio on 0 dBsm target at 1000 kilometers, with 0.1 seconds of coherently summed pulses, shall be at least 55 dB.

3.2.1.1.5 TRADEX signal-to-noise ratio on 0 dBsm target at 1000 kilometers, with 0.1 seconds of coherently summed pulses, shall be at least 54 dB.

3.2.1.1.6 ALTAIR absolute two sigma metric errors on a 15 dBsm radar cross section (RCS) target in geosynchronous orbit shall not exceed 40 meters range, 1 cm/s range rate, 0.8 milliradians traverse and elevation angles.

3.2.1.1.7 TRADEX absolute two sigma metric errors on a 15 dBsm RCS target in geosynchronous orbit shall not exceed 25 meters range,

0.3 cm/s range rate, 0.6 milliradians traverse & elevation angles.

3.2.1.1.8 ALTAIR and TRADEX absolute two sigma RCS errors shall not exceed 1 dB.

(CDRL A020 applies to 3.2.2.4.1.1-8 above.)

The contractor shall ensure that metric accuracy of observations is within the RTS published accuracies for the system being used. A minimum of 95% of the operational hours specified in the PWS are met. A minimum of 90% of tasked new launches are supported with no more than 2 instances of failure to support a new launch per evaluation period. The Contractor shall develop lessons learned and implement corrective actions to address missed events.

3.2.1.2 Space Object Identification (SOI)

The contractor shall collect, process and report SOI data.

In support of DoD SSN Space Object Identification (SOI) operations, when tasked by USSTRATCOM or designated representative (Alternate Space Control Center (ASCC)), the contractor shall provide 80 hours a week of SOI image support. (CDRL A020)

APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED - SMDC #6140, 11OCT2016 Page 13

3.2.1.3 Space Surveillance Network (SSN) 15 Minute Recall

The contractor shall maintain a primary SSN (ALTAIR / TRADEX) sensor 15-minute alert recall to support tracking New Foreign Launches (NFLs) that overfly RTS as part of the DoD SSN except when the sensor is entered into maintenance shutdown or preplanned maintenance outages.

3.2.1.4 Space Object Identification (SOI) Three (3) Hour Recall

The contractor shall provide a three (3) hour alert recall to ARPA/Lincoln C-Band Observable Radar (ALCOR)/Millimeter Wave Radar (MMW) to support tracking high priority missions that overfly RTS as part of the DoD SSN, except when ALCOR/MMW enters into maintenance shutdown or preplanned maintenance outage.

3.2.1.5 Monthly Maintenance Schedule (MMS) for RTS Space Operations

Sensors

The contractor shall provide a MMS to the 21st Operational Space Squadron, no later than (NLT) the 15th day of each month, detailing maintenance shutdown and/or preplanned maintenance outages for the following month and a projection of maintenance outages for the second following month. (CDRL: A051).

3.2.2 RTS Instrumentation/System Maintenance

Objective: Perform all necessary actions to maintain (IAW AR 750-1) all of the RTS instrumentation and systems and the Airport Surveillance Radar (ASR-11), to include hardware, software, ancillary equipment and facilities on-site or in CONUS, such that they meet the capabilities published in the ISFM. This includes maintaining instrumentation/ systems published accuracy and performance as well as maintaining availability, reliability, supportability, and ease of use. Conduct any necessary testing to collect the appropriate data and present this data (as required) to prove that the maintenance requirements have been met.

Ensure that All RTS instrumentation listed in the RTS ISFM and TFEM, are maintained and All RTS instrumentation maintenance on systems listed in the ISFM and TFEM is recorded via an Army approved standard logistics information system (LIS). Maintain operational availability based on published capabilities of not less than 95% for each designated RTS Space Operations instrumentation/system, and 98% of designated mandatory RTS sensors during RTS Test Mission Windows (from each systems defined in the ISFM and TFEM) including range safety system.

APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED - SMDC #6140, 11OCT2016 Page 14

3.2.2.1 Radar Maintenance

The contractor shall maintain all RTS range radars, and the airport surveillance radar (ASR-11) and associated equipment, to the required capabilities IAW the RTS ISFM to meet mission test plans (CDRL A014) and schedules (CDRLs A015 and A019).

3.2.2.2 RTS Optical Sensor Maintenance

The contractor shall maintain all RTS range optical sensors to the required capabilities IAW the RTS ISFM to meet mission test plans (CDRL A014) and schedules (CDRLs A015 and A019).

3.2.2.3 RTS Telemetry Maintenance

The contractor shall maintain all RTS range telemetry systems to the required capabilities IAW the RTS ISFM to meet mission test plans (CDRL A014) and schedules (CDRLs A015 and A019).

3.2.2.4 RTS Command and Control Center Maintenance

The contractor shall maintain all required Command and Control Centers (Huntsville Mission Control Center (HMCC) and Kwajalein Mission Control Center (KMCC) as defined within the RTS ISFM.

3.2.2.5 RTS Range Safety System Maintenance

The contractor shall maintain all RTS range safety systems (Range Safety Control Center (RSCC) to include Kwajalein and Roi Namur Command Destruct sub-systems), and the Kwajalein Mobile Range Safety System (KMRSS) to the required capabilities IAW the RTS ISFM to meet mission test plans (CDRL A014) and schedules (CDRLs A015 and A019).

3.2.2.6 Kwajalein Missile Impact Scoring System (KMISS) Maintenance

The contractor shall maintain the KMISS to the required capabilities IAW the RTS ISFM to meet mission test plans (CDRL A014) and schedules (CDRLs A015 and A019).

3.2.2.7 Ground Release of Calibration Spheres to Support Range Standard

Technical Services Requirements

The contractor shall prepare and release calibration spheres in support of STS requirements. The contractor shall ensure calibration spheres operations/launches are successfully conducted to meet schedule and requirements.

APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED - SMDC #6140, 11OCT2016 Page 15

3.2.2.8 RTS Instrumentation and Support Facilities Manual (ISFM)

The contractor shall update and maintain the RTS ISFM. This manual is to describe the capabilities (RTS sensor characteristics) of the current RTS instrumentation systems.

The purpose of the manual is to provide a ready reference of RTS capabilities for Range customers and all planning and operational elements. The manual shall contain a description of all mission support and instrumentation systems available at RTS IAW

CDRL A036.

3.2.2.9 Mean Time Between Failure (MTBF) and Mean Time To Repair (MTTR)

Record Maintenance

The contractor shall maintain Mean Time Between Failure (MTBF) and Mean Time To Repair (MTTR) records and remain knowledgeable of Instrumentation/systems capabilities, performance, reliability, availability and maintainability. The contractor shall calculate MTBF and MTTR for each instrumentation/system including range safety systems. This data shall be used to prepare the Sensor Status Report IAW CDRL A023 to document these results.

3.2.2.10 RTS Sensor Reliability Report

The contractor shall deliver the RTS sensor reliability report IAW CDRL A024 requirements.

3.2.2.11 RTS Geodetic Coordinate Surveys and the RTS Geodetic

Coordinates Manual

The contractor shall prepare and conduct geodetic coordinate surveys and maintain and update the RTS Geodetic Coordinates Manual. This manual specifies the geodetic coordinates of RTS instrumentation sites and of calibration sites used by instrumentation and sensors. (CDRL A026)

3.2.2.12 Plant-In Place Drawings and Circuit Layouts

The contractor shall provide Plant-In-Place Drawings and Circuit Layout Records (CLRs) report for all RTS instrumentation and communications circuits containing all deletions, additions, corrections, and changes to existing circuit data IAW CDRL A027 requirements.

3.2.2.13 Prepare and provide Instrumentation Status and Weekly Activity

Report.

APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED - SMDC #6140, 11OCT2016 Page 16

The contractor shall provide to the Government a weekly activity report summarizing operational, maintenance and/or testing activities; performance metrics; and significant events conducted in the instrumentation/system areas on a weekly basis. The weekly activity report can also include any information that the contractor deems may be of interest to the Government. (CDRL A025).

3.2.2.14 Wake Island and Off Atoll Missions in Support of RTS Standard

Technical Services

The contractor shall operate, maintain, and calibrate RTS systems and associated equipment at Wake Island and other locations within the RTS AOR outside Kwajalein Atoll as part of RTS range readiness and instrumentation maintenance.

The contractor shall provide a report for extended areas of support IAW CDRL A032.

3.2.3 RTS Mission Comms/IT Services

Objective: Support RTS Mission Comms/IT Services. NOTE: These services are separate and distinct from NETCOM provided baseline (Installation wide) Command, Control, Communications, Computers, and Information Management (C4IM) services.

3.2.3.1 Classified JWICS Network

The contractor shall provide operations, maintenance, and engineering support to the RTS Joint World-Wide Intelligence Communications Systems (JWICS). The contractor shall ensure no incidence of failure is caused by circumstances within contractor control Examples of failures caused by external circumstances would include, telecommunications link inoperative or scheduled maintenance downtimes.

3.2.3.2 RTS Network(s) Vulnerability Management

The contractor shall institute processes and procedures for vulnerability management to ensure RTS Networks (computers, networks, programs, and data) are protected against unintended or unauthorized access, change, or destruction, IAW DoDI 8510.01 Risk Management Framework (RMF) for DoD Information Technology (IT), DODI 8500.1 Cybersecurity, AR 25-2 Information Assurance, Army Regulation 380-5 Department of the Army Information Security Program, Army Regulation 380-53 Information Systems Security Monitoring, Army Information Assurance Program Best Business Practices, Army Regulation 25-1 Army Knowledge Management and Information Technology, and other applicable and follow-on Cybersecurity/Information Assurance standards.

Adherence to this requirement shall be included in all subcontracts at any tier when data is to be delivered or introduced on to any RTS Network AIS. The Contractor shall conduct network vulnerability scans and deliver scan reports as requested, but at least monthly (CDRL A029). The Contractor shall perform Cybersecurity compliance assessments and deliver reports (CDRL A053).

APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED - SMDC #6140, 11OCT2016 Page 17

3.2.3.3 Software Engineering Support to RTS Mission Specific Networks and

Software Compatibility

The contractor shall provide software engineering support and administration support services at RTS facilities for all operating systems used in the IMS to ensure compatibility IAW DoDI 8510.01 Risk Management Framework (RMF) for DoD Information Technology (IT), DODI 8500.1 Cybersecurity, AR 25-2 Information Assurance, Army Regulation 380-5 Department of the Army Information Security Program, Army Regulation 380-53 Information Systems Security Monitoring, Army Information Assurance Program Best Business Practices, Army Regulation 25-1 Army Knowledge Management and Information Technology, and other applicable and follow-on Cybersecurity/Information Assurance standards. Establish criteria for the life cycle software development, and ensure software compatibility with existing RTS network systems as defined in the RTS Instrumentation.

3.2.3.4 Software License Compliancy for RTS Mission Specific IMS

The contractor shall maintain all existing IMS software site licenses, accurate licensing records, and ensure licensing compliance. Software site licensing shall adhere to IAW DoDI 8510.01 Risk Management Framework (RMF) for DoD Information Technology (IT), DODI 8500.1 Cybersecurity, AR 25-2 Information Assurance, Army Regulation 380-5 Department of the Army Information Security Program, Army Regulation 380-53 Information Systems Security Monitoring, Army Information Assurance Program Best Business Practices, Army Regulation 25-1 Army Knowledge Management and Information Technology, and other applicable and follow-on Cybersecurity/Information Assurance standards, United States copyright regulations, and commercial vendor requirements. Contractor shall ensure that software licenses logs are up to date and zero occurrences of inspection failure due to non-compliance.

3.2.3.5 Accreditation and Configuration Documentation for RTS Mission

Specific IMS

The contractor shall develop and maintain up to date accreditation and configuration documentation utilizing enterprise Mission Assurance Support Services (eMASS) or follow-on DISA required tools, as applicable, and include a description of the RTS IMS hardware and software; the facility layout; electrical diagrams and connections; logical connections; equipment locations and elevations; user operating procedures (OPs); and other documentation as directed. This documentation will include a physical network configuration with complete descriptions and locations of all microcomputers and peripherals attached to the IMS and clearly describe how cybersecurity controls are addressed. System accreditations shall be maintained in IAW DoDI 8510.01 Risk Management Framework (RMF) for DoD Information Technology (IT), DODI 8500.1 Cybersecurity, AR 25-2 Information Assurance, Army Regulation 380-5 Department of the Army Information Security Program, Army Regulation 380-53 Information Systems

APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED - SMDC #6140, 11OCT2016 Page 18

Security Monitoring, Army Information Assurance Program Best Business Practices, Army Regulation 25-1 Army Knowledge Management and Information Technology, and other applicable and follow-on Cybersecurity/Information Assurance standards.

Accreditation and configuration documents will be updated within 90 calendar days to reflect current network configuration after software and/or hardware modifications or upgrades are applied to the systems. Contractor shall ensure no incidents of non-compliance of RTS mission specific IMS accreditation documents (CDRL A054).

3.2.3.6 RTS Mission Specific IMS Studies and Recommend Solutions

The contractor shall conduct studies and make recommended solutions as directed by the Government. The studies shall include, but are not limited to:

Determine current capabilities;

Analyze requirements for new or enhanced equipment and services;

Design and engineering IMS enhancements;

Evaluate alternatives and make recommendations on the use of commercial off-the-shelf (COTS)/Government off-the-shelf (GOTS) equipment/software for providing required IMS capabilities; and, Plan and schedule implementation of equipment upgrades. Contractor shall ensure studies and recommendations are in accordance AR 25-1.

(CDRL A040)

3.2.3.7 RTS Mission Specific Knowledge Management via a Government

Provided Enterprise IMS

The contractor shall utilize Government Furnished Information (GFI) DoD common access portal (currently enterprise SharePoint) for managing all RTS Mission technical and administrative data. RTS mission documentation (to include CDRLs) available via DoD common access portal.

3.2.3.8 RTS Mission Specific IMS Security Architecture

The contractor shall design, implement, and maintain the IMS security architecture by denying unauthorized access to the IMS and ensuring that the integrity of the IMS is not compromised. Recommend security firewalls to be implemented at key points within the IMS. This is satisfied by compliance with DIARMF and AR 25-2 or any future regulatory or policy guidance that modifies the aforementioned requirement. The contactor shall ensure. All unauthorized network accesses reported to Government RTS IM Security within 2 hours of detection. The contractor-developed security

APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED - SMDC #6140, 11OCT2016 Page 19 architecture shall provide security protection that provides the following: The IMS backbone and all IMS enterprises will be protected by a firewall; all access through fire-walls will be authenticated; all transactions across the backbone will be secure;

information domains will be established for all functional areas (e.g., command and control, intelligence, administrative, finance, etc.); global, dynamic security management, across the IMS WAN, for all information domains will be maintained. All cyber security vulnerability compliance issues will be resolved by specified suspense date.

3.2.3.9 RTS Mission Specific IMS Password System

The contractor shall maintain a control system and procedures to generate and issue system user identifications and passwords for Government provided RTS Mission specific IMS systems IAW security regulations and procedures. Passwords will conform to criteria contained in AR 25-1 and USASMDC 25-1 or current standards.

3.2.3.10 RTS Technical Control Facility

The contractor shall operate RTS Technical Control Facility (currently Kwajalein Building 1010).The contractor shall safely operate, maintain, troubleshoot, analyze and repair mission circuits as per RTS Instrumentation and Communications, Plant-In-Place Drawings and Circuit Layout Records.

3.2.3.11 Provide RTS End User Video Telecommunications (VTC) Support

The contractor shall provide classified and unclassified VTC sessions as requested, to include processing requests, scheduling, resolving conflicts, and monitoring VTC sessions for RTS. VTC Action Log(s) and Schedule Log(s) must be maintained which contain all VTC scheduling and actions. Requests shall be accepted via paper, email, phone, and in person. The contractor shall operate and maintain GFE VTC equipment.

Support includes operation and maintenance for commercial dial-up, classified and unclassified Government accredited VTC systems. The contractor shall ensure the following: All VTC sessions connected and completed at the maximum bandwidth available; VTC events are scheduled when requested or requestor informed that it could not be scheduled and worked with requestor for alternate dates/times within one working day; Confirmation of event scheduled sent to requestor (via email or phone) within one working day if event could be schedule as requested.

3.2.3.12 Maintain RTS Mission Data Networks

The contractor shall perform all necessary actions to maintain the MDN backbone such that it performs as expected in support of all RTS missions. This includes maintaining availability, reliability, supportability, compatibility and ease of use. The contractor shall conduct any necessary testing to collect the appropriate data and present this data as required to prove that the maintenance requirements have been met. The contractor

APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED - SMDC #6140, 11OCT2016 Page 20 shall ensure The MDN provides an overall operational availability (Ao) of 95% and an operational availability (Ao) of 99% during mission support windows and that MDN status updates are provided according to mission planning schedules or as requested by the Government and status updates are accurate and contain adequate information for determining mission readiness status (CDRL A024).

3.2.3.13 RTS SATCOM Facility

The contractor shall operate, maintain, troubleshoot, and repair the RTS Satellite Communications (SATCOM) Facility 24 hours/day, 7 days/week IAW DISA requirements (IAW DISACs 800-A110-1 and 800-70-1 or updated versions). The contractor shall provide a SATCOM availability report IAW CDRL requirements (CDRL A039).

3.2.4 STS Support Functions

Objective: Provide RTS Support Functions consisting of systems engineering support, launch ordnance operations, mission ground safety operations, specialized facility maintenance, calibration lab support, Radio Frequency (RF) safety for RTS Instrumentation, RTS environmental support, unexploded ordnance (UXO) handling and disposal, industrial safety, RTS security management, RTS mission specific Kwajalein installation (logistics) support coordination, financial resource management, RTS Government property management, configuration management.

3.2.4.1 STS Systems Engineering Support

Objective: Provide engineering support to RTS for special studies, special projects/tasks as required and approved by RTS. Support periodic projects at RTS that require additional engineering and/or technician staffing.

3.2.4.1.1 Engineering Tasks

The contractor shall perform systems engineering for RTS approved projects, special studies and/or tasks as required to support the…