11B5040018revA_-_CABINET_W_ASSEMBLY.pdf

65.87

SEE NOTE 4

4 3X

30.00

27.75

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2004

B. ASME Y14.5-2009

2. IDENTIFICATION OF THE SUGGESTED SOURCE(S) OF SUPPLY

HEREON IS NOT TO BE CONSTRUED AS A GUARANTEE OF PRESENT

OR CONTINUED AVAILABILITY AS A SOURCE OF SUPPLY FOR THE

ITEM DESCRIBED ON THE DRAWING.

3. VENDOR PART NUMBER(S) ARE FOR REFERENCE ONLY. DRAWING

SPECIFICATIONS AND DIMENSIONAL REQUIREMENTS SUPERCEDE

VENDOR PART NUMBER(S) AND/OR CATALOG CALLOUTS.

4. DOOR NOT SHOWN FOR CLARITY.

5. SOME ASSEMBLY MAY BE REQUIRED.

6. CABINET W ASSEMBLY AS SHOWN MUST BE DIS-ASSEMBLED ONLY

TO THE EXTENT REQUIRED TO MEET REQUIREMENTS OF ALTERED

ITEM DRAWING 11B5091305 - CABINET W HOUSING, MODIFIED, AND

RE-ASSEMBLED AS ITEM 11B5040017 - CABINET W ASSEMBLY

WITHOUT TOOLS.

7. REPLACEMENT PARTS ARE NOTED IN COMPONENT LIST AND ARE

FOR REFERENCE ONLY.

REVISIONS

LTR NOR NUMBER DATE APPROVED

- NOR 738-0001-001 2014-04-25 PMS

A 738-0110-004 2016-11-29 PMS

SUGGESTED SOURCE OF SUPPLY

PART

NUMBER

VENDOR DATA

NAME & ADDRESS CAGE

CODE

VENDOR

PART NO. DESCRIPTION

11B5040018

STANLEY VIDMAR STORAGE TECHNOLOGIES

11 GRAMMES ROAD

ALLENTOWN, PA 18103

800-523-9462

34004 PXKK3071A-01

CABINET WITH SHOCK FEATURE, SHOCK

BAR FEATURE, NO PALLET FEATURE, AND

MOBILE SECURING FEATURE.

PARTS LIST

ITEM

NO. PART NUMBER NOMENCLATURE UNIT OF MEASURE QTY.

1 11B5091041 CABINET HOUSING EA 1

2 11B5091010 CABINET SHELF EA 2

3 11B5091009 CABINET BOTTOM PAN EA 1

4 11B5091011 MEDIUM BATTEN BAR EA 3

5 11B5091023 CABINET CASTERS SET 1

6 11B5091044 LARGE CABINET DOOR ASSEMBLY EA 1

SALIENT FEATURES

MUST BE INDUSTRIAL QUALITY

CONFIGURATION CABINET WITH TWO SHELVES, BOTTOM PAN, SINGLE DOOR, AND

CASTERS

SHELF ADJUSTMENT

THE SHELVES SHALL BE CAPABLE OF BEING MOVED UP AND DOWN IN

1-3/4" OR LESS INCREMENTS OVER A MINIMUM OF 75% OF THE

CABINETS STORAGE HEIGHT

SHELF WEIGHT CAPACITY WHEN INSTALLED IN THE HOUSING, SHELVES SHALL HAVE A MINIMUM

WEIGH CAPACITY OF 1000 POUNDS

CASTER WEIGHT CAPACITY WHEN INSTALLED ON THE CABINET, CASTERS SHALL HAVE A MINIMUM

WEIGHT CAPACITY OF 3600 POUNDS

BATTEN ADJUSTMENT

THE BATTENS SHALL BE CAPABLE OF BEING MOVED UP AND DOWN IN

1-3/4" OR LESS INCREMENTS OVER A MINIMUM OF 75% OF THE

CABINETS STORAGE HEIGHT

DROP TEST

SHALL BE CAPABLE OF SURVIVING A 6" FLAT DROP WHILE SECURED

TO A PALLET WITH 75 POUNDS OF SECURED WEIGHT ON INSTALLED

SHELVES AND 90 POUNDS OF SECURED WEIGHT ON THE CABINET

FLOOR/BOTTOM PAN WITHOUT ANY PERMENANT DAMAGE

RAIL IMPACT TEST

SHALL BE CAPABLE OF SURVIVING AN 8 MILE AN HOUR RAIL IMPACT

FORWARD AND BACKWARDS WHILE SECURED TO A PALLET WITH 75

POUNDS OF SECURED WEIGHT ON INSTALLED SHELVES AND 90

POUNDS OF SECURED WEIGHT ON THE CABINET FLOOR/BOTTOM PAN

WITHOUT ANY PERMENANT DAMAGE

ROAD TEST

THE SHELVES AND BATTENS SHALL REMAIN FIRMLY INSTALLED AFTER

400 MILES OVER PAVED ROADS AND 600 MILES OVER SECONDARY

ROADS (0.2</=RMS RANGE, IN </= 0.6)

ENVELOPE IN THE CONFIGURATION SHOWN, THE ASSEMBLY SHALL FIT IN AN

ENVELOPE NO LARGER THAN 32-1/2" WIDE BY 33" LONG BY 66" HIGH

DWG NO.

U.S. ARMY RESEARCH, DEVELOPMENT AND ENGINEERING COMMAND

ROCK ISLAND ARSENAL, ROCK ISLAND, ILLINOIS 61299

EDGEWOOD CHEMICAL BIOLOGICAL CENTER

CONTRACT NO.

5B5M3

CAGE CODE

D

SIZE

3 PLACE DECIMALS ±

2 PLACE DECIMALS ± .03

SHEETSCALE

DRAWING APPROVAL

DESIGN APPROVAL

SUBMITTED

CHECKERDRAWN BY

ORIGINAL DATE

MATERIAL

TOLERANCES ON:

DIMENSIONS ARE IN INCHES

UNLESS OTHERWISE SPECIFIED

EQUIPMENT CODE NO.

NEXT ASSY

8 7 6 5 4 3 2 1

8 7 6 5 4 3 2 1

D

C

B

A

D

C

B

A

FRACTIONS ± CABINET W ASSEMBLY

11B5040018 1:12

2012-08-03

R. McCLAIN R. McCLAIN

R. McCLAIN

T. LETTIS

P. SCHLUE738

(YR-MO-DA)

ANGLES ±

SEE NOTE 6

DISTRIBUTION STATEMENT A. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

VENDOR ITEM CONTROL DRAWING

REV: A