11B5040003_-_CABINET_A_ASSEMBLY.pdf

36.50

22.32

35.00

SEE NOTE 4

FRONT VIEW

29.75

30.00

27.75

SEE NOTE 5

TOP VIEW

2 DOOR

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2004

B. ASME Y14.5-2009

2. IDENTIFICATION OF THE SUGGESTED SOURCE(S) OF SUPPLY

HEREON IS NOT TO BE CONSTRUED AS A GUARANTEE OF PRESENT

OR CONTINUED AVAILABILITY AS A SOURCE OF SUPPLY FOR THE

ITEM DESCRIBED ON THE DRAWING.

3. VENDOR PART NUMBER(S) ARE FOR REFERENCE ONLY. DRAWING

SPECIFICATIONS AND DIMENSIONAL REQUIREMENTS SUPERCEDE

VENDOR PART NUMBER(S) AND/OR CATALOG CALLOUTS.

4. DOOR NOT SHOWN FOR CLARITY.

5. STAINLESS STEEL TABLE TOP REMOVED FOR CLARITY.

6. ITEMS MAY NOT COME PRE-ASSEMBLED.

7. CABINET A ASSEMBLY AS SHOWN MUST BE DIS-ASSEMBLED ONLY

TO THE EXTENT REQUIRED TO MEET REQUIREMENTS OF ALTERED

ITEM DRAWINGS 11B5091260 - CABINET A HOUSING, MODIFIED;

11B5091276 - SHELF A1 ASSEMBLY; 11B5091274 - CABINET A

BOTTOM PAN ASSEMBLY; 11B5091263 - CABINET A COUNTER TOP,

MODIFIED AND RE-ASSEMBLED AS ITEM 11B5040002.

8. REPLACEMENT PARTS ARE NOTED IN COMPONENT LIST AND ARE

FOR REFERENCE ONLY.

REVISIONS

LTR NOR NUMBER DATE APPROVED

- NOR 738-0001-001 2014-04-25 PMS

SALIENT FEATURES

MUST BE INDUSTRIAL QUALITY

CONFIGURATION CABINET WITH ONE SHELF, BOTTOM PAN, SINGLE DOOR, AND

COUNTERTOP

SHELF ADJUSTMENT

THE SHELVES SHALL BE CAPABLE OF BEING MOVED UP AND

DOWN IN 1-3/4" OR LESS INCREMENTS OVER A MINIMUM OF 75%

OF THE CABINETS STORAGE HEIGHT

SHELF WEIGHT CAPACITY WHEN INSTALLED IN THE HOUSING, SHELVES SHALL HAVE A

MINIMUM WEIGH CAPACITY OF 1000 POUNDS

BATTEN ADJUSTMENT

THE BATTENS SHALL BE CAPABLE OF BEING MOVED UP AND

DOWN IN 1-3/4" OR LESS INCREMENTS OVER A MINIMUM OF 75%

OF THE CABINETS STORAGE HEIGHT

DROP TEST

SHALL BE CAPABLE OF SURVIVING A 6" FLAT DROP WHILE

SECURED TO A PALLET WITH 60 POUNDS OF SECURED WEIGHT

ON AN INSTALLED SHELF AND 90 POUNDS OF SECURED WEIGHT

ON THE CABINET FLOOR/BOTTOM PAN WITHOUT ANY

PERMENANT DAMAGE

RAIL IMPACT TEST

SHALL BE CAPABLE OF SURVIVING AN 8 MILE AN HOUR RAIL

IMPACT FORWARD AND BACKWARDS WHILE SECURED TO A

PALLET WITH 60 POUNDS OF SECURED WEIGHT ON AN

INSTALLED SHELF AND 90 POUNDS OF SECURED WEIGHT ON

THE CABINET FLOOR/BOTTOM PAN WITHOUT ANY PERMENANT

DAMAGE

ROAD TEST

THE SHELVES AND BATTENS SHALL REMAIN FIRMLY INSTALLED

AFTER 400 MILES OVER PAVED ROADS AND 600 MILES OVER

SECONDARY ROADS (0.2</=RMS RANGE, IN </= 0.6)

ENVELOPE

IN THE CONFIGURATION SHOWN, THE ASSEMBLY SHALL FIT IN

AN ENVELOPE NO LARGER THAN 30" WIDE BY 33" LONG BY 36-

1/2" HIGH

SUGGESTED SOURCE OF SUPPLY

PART

NUMBER

VENDOR DATA

NAME & ADDRESS CAGE

CODE

VENDOR

PART NO. DESCRIPTION

11B5040003

STANLEY VIDMAR

11 GRAMMES ROAD

ALLENTOWN, PA 18103

800-523-9462 34004 P001591A-01

CABINET WITH SHOCK FEATURE AND SHOCK

BAR FEATURE AND NO PALLET FEET

FEATURE

COMPONENT LIST

QTY.

REQD.

UNIT OF

MEASURE

DRAWING OR

PART NO. NOMENCLATURE OR MATERIAL ITEM

NO.

1 EA 11B5091034 CABINET HOUSING 1

1 EA 11B5091043 DOOR ASSEMBLY, CABINET A 2

1 EA 11B5091008 COUNTER TOP, CABINET A 3

1 EA 11B5091009 CABINET BOTTOM PAN 4

1 EA 11B5091010 CABINET SHELF 5

3 EA 11B5091011 BATTEN 6

DWG NO.

U.S. ARMY RESEARCH, DEVELOPMENT AND ENGINEERING COMMAND

ROCK ISLAND ARSENAL, ROCK ISLAND, IL 61299

EDGEWOOD CHEMICAL BIOLOGICAL CENTER

CONTRACT NO.

5B5M3

CAGE CODE

D

SIZE

3 PLACE DECIMALS ±

2 PLACE DECIMALS ±

SHEETSCALE

DRAWING APPROVAL

DESIGN APPROVAL

SUBMITTED

CHECKERDRAWN BY

ORIGINAL DATE

MATERIAL

TOLERANCES ON:

DIMENSIONS ARE IN INCHES

UNLESS OTHERWISE SPECIFIED

EQUIPMENT CODE NO.

NEXT ASSY

8 7 6 5 4 3 2 1

8 7 6 5 4 3 2 1

D

C

B

A

D

C

B

A

FRACTIONS ± CABINET A ASSEMBLY

11B5040003 1:8

2012-08-01

R. McCLAIN R. McCLAIN

(YR-MO-DA)

ANGLES ±

SEE NOTE 7

DISTRIBUTION STATEMENT A. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

VENDOR ITEM CONTROL DRAWING