W900KK-20-R-0011_Amendment 0009_Executed.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of Amendment 0009 to Solicitation W900KK-20-R-0011 is to provide responses to the Solicitation Question Window 2 Questions, w hich are provided in a Comment Response Matrix (CRM) posted along w ith this amendment on the beta.SAM.gov w ebsite. This amendment contains numerous changes throughout the solicitation, and a number of attachments are also updated.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 105

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 10-Apr-2020

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X W900KK-20-R-0011

X 9B. DATED (SEE ITEM 11)

21-Feb-2020

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

10-Apr-2020

CODE

ARMY CONTRACTING COMMAND - ORLANDO

ATTN: BRAVO DIVISION

12211 SCIENCE DRIVE

ORLANDO FL 32826-3224

W900KK 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W900KK-20-R-0011

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION B - SUPPLIES OR SERVICES AND PRICES

CLIN 0008

The CLIN extended description has changed from:

This CLIN 0008 represents requirements for the delivery of data in accordance with DD Form 1423, entitled Contract Data Requirements Lists, as incorporated by reference at Section J as Exhibit A, Exhibit B and Exhibit C with a 5 year ordering period (17 December 2020 – 16 December 2025). The contractor shall perform in accordance with the NCRC EPOS Performance Work Statement (PWS-2019-044), as further specified by Task/Delivery Orders issued under the NCRC EPOS MATOC and the individual CDRLs.

To:

This CLIN is Not Separately Priced, and the Quantity of 1,000 is for contract administration purposes only. This CLIN 0008 represents requirements for the delivery of data in accordance with DD Form 1423, entitled Contract Data Requirements Lists, as incorporated by reference at Section J as Exhibit A, Exhibit B and Exhibit C with a 5 year ordering period (17 December 2020 – 16 December 2025). The contractor shall perform in accordance with the NCRC EPOS Performance Work Statement (PWS-2019-044), as further specified by Task/Delivery Orders issued under the NCRC EPOS MATOC and the individual CDRLs.

The pricing detail quantity has changed from UNDEFINED to 1,000.00.

CLIN 0009

This CLIN 0009 represents requirements for Contractor Manpower Reporting, in accordance with paragraph 3.16 of the NCRC EPOS Performance Work Statement (PWS-2019-044) and as further specified by individual Task/Delivery Orders issued under the NCRC EPOS MATOC, with a 5 year ordering period (17 December 2020 – 16 December 2025).

This CLIN is Not Separately Priced, and the Quantity of 1,000 is for contract administration purposes only. This CLIN 0009 represents requirements for Contractor Manpower Reporting, in accordance with paragraph 3.16 of the NCRC EPOS Performance Work Statement (PWS-2019-044) and as further specified by individual Task/Delivery Orders issued under the NCRC EPOS MATOC, with a 5 year ordering period (17 December 2020 – 16 December 2025).

CLIN 0010

This CLIN 0010 represents requirements for Contractor Acquired Property, in accordance with the NCRC EPOS Performance Work Statement (PWS-2019-044), paragraph 3.31 and as further specified by individual Task/Delivery Orders issued under the NCRC EPOS MATOC, with a 5 year ordering period (17 December 2020 – 16 December 2025).

This CLIN is Not Separately Priced, and the Quantity of 1,000 is for contract administration purposes only. This CLIN 0010 represents requirements for Contractor Acquired Property, in accordance with the NCRC EPOS Performance Work Statement (PWS-2019-044), paragraph 3.31 and as further specified by individual Task/Delivery Orders issued under the NCRC EPOS MATOC, with a 5 year ordering period (17 December 2020 – 16 December 2025).

CLIN 1007

This CLIN 1007 represents requirements for the delivery of data in accordance with DD Form 1423, entitled Contract Data Requirements Lists, incorporated by reference at Section J as Exhibit A, Exhibit B and Exhibit C with a 2 year ordering period (17 December 2025 – 16 December 2027). The contractor shall perform in accordance with the NCRC EPOS Performance Work Statement (PWS-2019-044), as further specified by Task/Delivery Orders

This CLIN is Not Separately Priced, and the Quantity of 1,000 is for contract administration purposes only. This CLIN 1007 represents requirements for the delivery of data in accordance with DD Form 1423, entitled Contract Data Requirements Lists, incorporated by reference at Section J as Exhibit A, Exhibit B and Exhibit C with a 2 year ordering period (17 December 2025 – 16 December 2027). The contractor shall perform in accordance with the NCRC EPOS Performance Work Statement (PWS-2019-044), as further specified by Task/Delivery Orders issued under the NCRC EPOS MATOC and the individual CDRLs.

CLIN 1008

This CLIN 1008 represents requirements for Contractor Manpower Reporting, in accordance with paragraph 3.16 of the NCRC EPOS Performance Work Statement (PWS-2019-044) and as further specified by individual Task/Delivery Orders issued under the NCRC EPOS MATOC, with a 2 year ordering period (17 December 2025 – 16 December 2027).

This CLIN is Not Separately Priced, and the Quantity of 1,000 is for contract administration purposes only. This CLIN 1008 represents requirements for Contractor Manpower Reporting, in accordance with paragraph 3.16 of the

NCRC EPOS Performance Work Statement (PWS-2019-044) and as further specified by individual Task/Delivery Orders issued under the NCRC EPOS MATOC, with a 2 year ordering period (17 December 2025 – 16 December 2027).

CLIN 1009

This CLIN 1009 represents requirements for Contractor Acquired Property, in accordance with the NCRC EPOS Performance Work Statement (PWS-2019-044), paragraph 3.31 and as further specified by individual Task/Delivery Orders issued under the NCRC EPOS MATOC, with a 2 year ordering period (17 December 2025 – 16 December 2027).

This CLIN is Not Separately Priced, and the Quantity of 1,000 is for contract administration purposes only. This CLIN 1009 represents requirements for Contractor Acquired Property, in accordance with the NCRC EPOS Performance Work Statement (PWS-2019-044), paragraph 3.31 and as further specified by individual Task/Delivery Orders issued under the NCRC EPOS MATOC, with a 2 year ordering period (17 December 2025 – 16 December 2027).

CLIN 2007

This CLIN 2007 represents requirements for the delivery of data in accordance with DD Form 1423, entitled Contract Data Requirements Lists, incorporated by reference at Section J as Exhibit A, Exhibit B and Exhibit C with a 3 year ordering period (17 December 2027 – 16 December 2030). The contractor shall perform in accordance with the NCRC EPOS Performance Work Statement (PWS-2019-044), as further specified by Task/Delivery Orders

This CLIN is Not Separately Priced, and the Quantity of 1,000 is for contract administration purposes only. This CLIN 2007 represents requirements for the delivery of data in accordance with DD Form 1423, entitled Contract Data Requirements Lists, incorporated by reference at Section J as Exhibit A, Exhibit B and Exhibit C with a 3 year ordering period (17 December 2027 – 16 December 2030). The contractor shall perform in accordance with the NCRC EPOS Performance Work Statement (PWS-2019-044), as further specified by Task/Delivery Orders issued under the NCRC EPOS MATOC and the individual CDRLs.

CLIN 2008

This CLIN 2008 represents requirements for Contractor Manpower Reporting, in accordance with paragraph 3.16 of the NCRC EPOS Performance Work Statement (PWS-2019-044) and as further specified by individual Task/Delivery Orders issued under the NCRC EPOS MATOC, with a 3 year ordering period (17 December 2027 – 16 December 2030).

This CLIN is Not Separately Priced, and the Quantity of 1,000 is for contract administration purposes only. This CLIN 2008 represents requirements for Contractor Manpower Reporting, in accordance with paragraph 3.16 of the NCRC EPOS Performance Work Statement (PWS-2019-044) and as further specified by individual Task/Delivery Orders issued under the NCRC EPOS MATOC, with a 3 year ordering period (17 December 2027 – 16 December 2030).

CLIN 2009

This CLIN 2009 represents requirements for Contractor Acquired Property, in accordance with the NCRC EPOS Performance Work Statement (PWS-2019-044), paragraph 3.31 and as further specified by individual Task/Delivery Orders issued under the NCRC EPOS MATOC, with a 3 year ordering period (17 December 2027 – 16 December 2030).

This CLIN is Not Separately Priced, and the Quantity of 1,000 is for contract administration purposes only. This CLIN 2009 represents requirements for Contractor Acquired Property, in accordance with the NCRC EPOS Performance Work Statement (PWS-2019-044), paragraph 3.31 and as further specified by individual Task/Delivery Orders issued under the NCRC EPOS MATOC, with a 3 year ordering period (17 December 2027 – 16 December 2030).

The following have been modified:

B.1 The Contract Line Item Numbers (CLINs) shown at Schedule B may be utilized in a Firm-Fixed-Price (FFP), Cost-Plus-Fixed-Fee (CPFF), Cost No-Fee (Cost), or Not-Separately-Priced (NSP) basis for Task/Delivery Orders issued under this contract. Each future Task/Delivery Order will be reviewed by the Procuring Contracting Officer (PCO) to determine the applicable contract type to meet those requirements. Individual Task/Delivery Orders may specify other contract types but must incorporate all applicable clauses into the Task/Delivery Order.

B.2 The collective ceiling for all contracts awarded under NCRC EPOS is $2,415,685,748.00, which may be ordered during the 10-year ordering period. Over the life of the contract the cumulative total of all delivery/task orders awarded will not exceed the ceiling without prior written approval of the PCO. The guaranteed minimum amount for each NCRC EPOS MATOC contract is $30,000.00.

B.2.1 To meet the guaranteed minimum at time of contract award, the Government will issue a Task Order 0001, entitled National Cyber Range Complex (NCRC) Innovation and Technology Council (NITC), to each awardee.

B.2.2 If a contract awardee never receives an additional Task/Delivery Order, or all option CLINs under Task Order 0001 are not exercised, the guaranteed minimum shall be considered satisfied when the contractor completes effort totaling at least $30,000.00 under the NITC Task Order 0001.

B.3 CLINs 0002 through 0007, 1001 through 1006 and 2001 through 2006 are established in Schedule B for the sole purpose of facilitating administration of the contract in the Governments’ Standard Procurement System (SPS).

Pricing for Task/Delivery Order CLINs will be at the individual Task/Delivery Order level as negotiated.

B.4 CLINs 0008, 1007 and 2007 represent requirements for the delivery of data in accordance with DD Form 1423, entitled Contract Data Requirements Lists, incorporated by reference at Section J as Exhibit A, Exhibit B and Exhibit C. The CDRLs under the base contract shall not be duplicated under when placing orders: changes to CDRLS shall be described in an addendum that will be made an attachment to the orders. New CDRLS may be incorporated under the base contract. As needed, unique CDRLs may be incorporated under Task/Delivery Orders at Section J of the order.

B.5 When applicable during performance, the Defense Acquisition Regulation Supplement requires establishment of separate line items at the contract level for Contractor Manpower Reporting (CLIN 0009, 1008 and 2008) and Contractor Acquired Property (CLIN 0010, 1009 and 2009). However, actual performance will be identified when each order is placed where applicable: the priced/not separately priced line item numbers at the order level need not be the same as the CLINs identified in Schedule B of the contract.

B.6 The NCRC EPOS Rate Guide incorporated by reference at Section J consists of “Not to Exceed” rates. The rates contained in the NCRC EPOS Rate Guide will be based on the Offeror’s fiscal year and will include rates for the 10-year ordering period.

B.6.1 Reserved

B.6.2 The proposed rates and labor categories in the NCRC EPOS Rate Guide will be used as Not to Exceed rates for any work under the contract (i.e., CPFF, Cost, FFP efforts) for the entire ten-year ordering period. At the Task/Delivery Order level, awardees may propose rates lower than the rates proposed in the NCRC EPOS Rate Guide; however, in no event will rates proposed at the Task/Delivery Order level exceed the rates proposed in the NCRC EPOS Rate Guide.

B.6.3 Labor categories not listed in the NCRC EPOS Rate Guide may be needed for a given delivery or task order.

Such labor categories, along with the fully burdened rates, may be proposed on a delivery/task order basis and will be binding only for that respective order unless incorporated into the NCRC EPOS Rate Guide.

B.7 Offerors shall not provide pricing for any CLINs identified in Schedule B below.

SECTION I - CONTRACT CLAUSES

The following have been added by reference:

252.209-7009 Organizational Conflict of Interest--Major Defense

Acquisition Program

MAY 2019

52.219-28 POST-AWARD SMALL BUSINESS PROGRAM RE-REPRESENTATION (JULY 2013)

(a) Definitions. As used in this clause--

Long-term contract means a contract of more than five years in duration, including options. However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority.

Small business concern means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (c) of this clause. Such a concern is ``not dominant in its field of operation'' when it does not exercise a controlling or major influence on a national basis in a kind of business activity in which a number of business concerns are primarily engaged. In determining whether dominance exists, consideration shall be given to all appropriate factors, including volume of business, number of employees, financial resources, competitive status or position, ownership or control of materials, processes, patents, license agreements, facilities, sales territory, and nature of business activity.

(b) If the Contractor represented that it was a small business concern prior to award of this contract, the Contractor shall represent its size status according to paragraph (e) of this clause or, if applicable, paragraph (g) of this clause, upon the occurrence of any of the following:

(1) Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause, if the novation agreement was executed prior to inclusion of this clause in the contract.

(2) Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract.

(3) For long-term contracts--

(i) Within 60 to 120 days prior to the end of the fifth year of the contract; and

(ii) Within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter.

(c) The Contractor shall represent its size status in accordance with the size standard in effect at the time of this re-representation that corresponds to the North American Industry Classification System (NAICS) code assigned to this contract. The small business size standard corresponding to this NAICS code can be found at http://www.sba.gov/content/table-small-business-size-standards.

(d) The small business size standard for a Contractor providing a product which it does not manufacture itself, for a contract other than a construction or service contract, is 500 employees.

(e) Except as provided in paragraph (g) of this clause, the Contractor shall make the representation required by paragraph (b) of this clause by validating or updating all its representations in the Representations and Certifications section of the System for Award Management (SAM) and its other data in SAM, as necessary, to ensure that they reflect the Contractor's current status. The Contractor shall notify the contracting office in writing within the timeframes specified in paragraph (b) of this clause that the data have been validated or updated, and provide the date of the validation or update.

(f) If the Contractor represented that it was other than a small business concern prior to award of this contract, the Contractor may, but is not required to, take the actions required by paragraphs (e) or (g) of this clause.

(g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following re-representation and submit it to the contracting office, along with the contract number and the date on which the re-representation was completed:

The Contractor represents that it ( ) is, ( ) is not a small business concern under NAICS Code 541519 - assigned to contract number W900KK-21-D-TBD.

(Contractor to sign and date and insert authorized signer's name and title).

(End of clause)

SECTION J - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

EXHIBITS AND ATTACHMENTS

LIST OF EXHIBITS & ATTACHMENTS Pages Date

W900KK-20-R-0011 Base Contract

Exhibit A: CDRLs 87 10-APR-2020 Exhibit B: CDRLs 7 10-APR-2020 Exhibit C: CDRLs 3 10-APR-2020

Attachment 1 NCRC EPOS IDIQ PWS 65 27-MAR-2020 Attachment 2 NCRC EPOS IDIQ QASP 7 27-MAR-2020 Attachment 3 NCRC EPOS IDIQ DSL (Document Summary List) 3 10-APR-2020 Attachment 4 {Reserved} Attachment 5 NCRC EPOS Ordering Procedures 53 7-FEB-2020

W900KK-20-R-0011-0001 NITC Task Order

Attachment 6 NITC Model Task Order 27 27-MAR-2020 Attachment 7 NITC PWS 6 27-MAR-2020 Attachment 8 NITC QASP 15 27-MAR-2020 Attachment 9 {Reserved} Attachment 10 NITC Government Rights in Technical Data 3 7-FEB-2020 Attachment 11 NITC DD 254 and Continuation Sheet 9 27-MAR-2020

Sample Charleston (CHS) Site Services Model Task Order

Attachment 12 Sample Charleston (CHS) Site Services Model Task Order 31 10-APR-2020 Attachment 13 {Reserved} Attachment 14 CHS PWS 31 10-APR-2020 Attachment 15 CHS QASP 16 27-MAR-2020 Attachment 16 NCRC Sample Range Event Schedule 54 30-MAR-2020 Attachment 17 CHS Government Rights in Technical Data 3 7-FEB-2020

Sample ITSM Model Task Order

Attachment 18 Sample ITSM Model Task Order 31 10-APR-2020

Attachment 19 {Reserved} Attachment 20 ITSM PWS 17 10-APR-2020 Attachment 21 ITSM QASP 16 27-MAR-2020 Attachment 22 {Reserved} Attachment 23 ITSM Government Rights in Technical Data 3 7-FEB-2020

Source Selection Documents

Attachment 24 NCRC EPOS Solicitation Comment Form 1 7-FEB-2020

Attachment 25 NCRC EPOS Distribution Agreement/GFI List 13 25-FEB-2020

Attachment 26 {Reserved}

Attachment 27 NCRC EPOS Cyber T&E Event Scenario 3 7-FEB-2020

Attachment 28 NCRC EPOS Cyber Training Event Scenario 4 27-MAR-2020

Attachment 29 NCRC EPOS Closed Environment Challenges Scenario 3 7-FEB-2020

Attachment 30 NCRC EPOS Event Support Plan Outline 1 10-APR-2020

Attachment 31 NCRC EPOS Compliance Matrix 2 10-APR-2020

Attachment 32 NCRC EPOS List of Past Performance Contracts 2 27-MAR-2020

Attachment 33 NCRC EPOS Past Performance Questionnaire 5 7-FEB-2020

Attachment 34 NCRC EPOS Past Performance Questionnaire Cover Letter 1 27-MAR-2020

Attachment 35 NCRC EPOS Past Performance Contract Description 1 10-APR-2020

Attachment 36 NCRC EPOS Sample Consent Letter 1 7-FEB-2020

Attachment 37 NCRC EPOS Lot 1 Proposal Cost/Price Workbook 52 10-APR-2020

Attachment 38 NCRC EPOS OEM or Non-OEM Declaration 2 7-FEB-2020

Attachment 39 NCRC EPOS DCMA Form 1620 Guaranty Agrmnt for 4 7-FEB-2020 for Corp Guarantor

Attachment 40 NCRC EPOS DCMA Form 1619 Subordination Agreement 2 7-FEB-2020

Attachment 41 NCRC EPOS Lot 2 Proposal Cost/Price Workbook 70 10-APR-2020

Attachment 42 NCRC EPOS DCMA Standard Form (SF) 1408 2 7-FEB-2020

The following attachments, if applicable, will be proposed by the Offeror in accordance with Section L and will be added to the basic contract as attachments upon award. These attachments will be renumbered, as appropriate, to be consistent with the other basic award attachments.

Attachment 43 Rate Sheet X TBD at Award Attachment 44 Property Management System Plan X TBD at Award Attachment 45 OCI Mitigation Plan X TBD at Award Attachment 46 Small Business Subcontracting Plan X TBD at Award Attachment 47 Small Business Participation Plan X TBD at Award

SECTION L - INSTRUCTIONS, CONDITIONS AND NOTICES TO BIDDERS

The following have been added by reference:

52.237-10 Identification of Uncompensated Overtime MAR 2015 252.209-7008 Notice of Prohibition Relating to Organizational Conflict of

Interest--Major Defense Acquisition Program

DEC 2010

INSTRUCTIONS TO OFFERORS

Introduction

This Section L takes precedence over any conflicting instructions found at FAR 52.215-1. The Government's solicitation W900KK-20-R-0011 provides the Offeror with the following elements: Sections A - M with Exhibits and Attachments incorporated at Section J. To facilitate locating documents contained within the solicitation all attachments are numbered sequentially. Attachments 1 – 5 will be incorporated at Section J of the contracts awarded to successful Offerors.

An awardable Task Order 0001 is described at Section J of the solicitation as Attachment 6. Attachments to Task Order 0001 are described sequentially at Section J of the solicitation as Attachments 7 – 11 with Attachment 9 marked as RESERVED. However, the solicitation Attachments 7 – 11 are described as Attachments 1 – 5 in Section J of Task Order 0001, and will be relabeled as Attachments 1-5 at time of award.

Two unawardable sample Task Orders that will be used for evaluation purposes only are included at Section J as Attachment 12 for Lot 1 (Full-and Open) and Attachment 18 for Lot 2 (Small Business Set-Aside). The Sample Charleston (CHS) Site Services Model Task Order at Attachment 12 includes Attachments 13 – 17 with Attachment 13 marked as RESERVED in Section J. The sample Information Technology System Management (ITSM) Task Order at Attachment 18 includes Attachments 19 – 23 with Attachments 19 and 22 marked as RESERVED in Section J.

Additional attachments to the solicitation are necessary to conduct a source selection. They are located at Section J as Attachment 24 through Attachment 42.

Exhibits A – C shall be incorporated in the contract(s) at Section J. Each order placed shall specify which of the Contract Data Requirements Lists (CDRLS) at Exhibit A – C are applicable to the order and therefore are incorporated by reference. At the order level an “Exhibit Supplement” shall describe differences between the CDRLs incorporated at Section J of the contract(s), and requirements under an order. For example, revised markings, mailing addresses and any other change required for performance under the order.

New CDRL(s) for work that is within the scope of the NCRC EPOS contract may be created when placing orders and incorporated at Section J of the contract, or if unique to an order incorporated at Section J of the order.

Offerors are advised that the costs of any response to, or other costs incurred as a result of responding to this solicitation, are at the Offeror’s own risk. Any costs incurred in preparing a response to this solicitation, may be attributable to Bid and Proposal (B&P) overhead costs, but may not be directly charged to any resulting awarded contract. B&P costs for this solicitation are costs covered by CAS 420/FAR 31.205-18.

L.1 Program Structure, Definitions and Objectives

L.1.1 Program Structure

This National Cyber Range Complex (NCRC) Event Planning, Operations, and Support (EPOS) procurement is being conducted under Federal Acquisition Regulation (FAR) Part 15, entitled Contracting by Negotiation. The selected contract vehicle type is a Multiple Award Indefinite Delivery Indefinite Quantity (IDIQ) Task Order Contract (MATOC) for the procurement of services and ancillary products to be competed among companies under

North American Industry Classification System (NAICS) code 541519 (Other Computer Related Services) with a size standard of $30 million. This U.S. industry comprises establishments primarily engaged in providing computer related services (except custom programming, systems integration design, and facilities management services).

Establishments providing computer disaster recovery services or software installation services are included in this industry.

L.1.2 Definitions

L.1.2.1 “Subcontract” means any contract as defined in FAR Subpart 2.1 entered into by a subcontractor to furnish supplies or services for performance of a prime contract or a subcontract. It includes but is not limited to purchase orders, and changes and modifications to purchase orders.

L.1.2.2 “Subcontractor” means any supplier, distributor, vendor, or firm that furnishes supplies or services to or for a prime contractor or another subcontractor. This includes, but is not limited to, a transfer of commercial items between divisions, subsidiaries, or affiliates of a contractor or subcontractor.

L.1.3 Objectives

L.1.3.1 This acquisition will result in award of contracts to the successful Offerors selected through competition.

This MATOC has a total potential ordering period up to 10 years that include a base ordering period (5 years), and 2 options for ordering periods consisting of a 2-year ordering period and a 3-year ordering period.

L.1.3.2 Quantity limits for the NCRC EPOS MATOC are stated in terms of dollar value. The maximum quantity of $2.415 billion is the amount the Government anticipates to order for all NCRC EPOS requirements during the ordering period. To bind the contracts, a guaranteed minimum will be satisfied in accordance with FAR 16.504(a)(1) for each NCRC EPOS IDIQ contract holder through the award of Task Orders for the National Cyber Range Complex Innovation and Technology Council (NITC) requirement included at Section J Attachment 7.

L.1.3.3 Award Date: The anticipated award date for this requirement is 17 December 2020.

L.1.3.3.1 This information is provided for use as a basis for schedules and burden (labor, overheads, G&A, etc.)

mid-point calculations. Successful Offerors that receive an award shall not be entitled to an equitable adjustment in contract price in the event the Government awards NITC Task Order 0001 before or after the anticipated award date.

L.1.3.3.2 For proposal evaluation purposes Offerors shall prepare their proposals assuming a NCRC EPOS MATOC ordering period and NITC Task Order 0001 period of performance (PoP) start date of 17 December 2020.

Ordering period dates under the MATOC, as well as the PoP and all associated delivery dates under the NITC order are subject to change in the event the award is made prior to or after 17 December 2020. Dates may be adjusted accordingly.

L.1.4 Key Dates

Solicitation Release Date: 21 February 2020 Requests for Technical Data Deadline: 25 February 2020 Solicitation Question Window 1 Due Date: 17 March 2020 Pre-Proposal Conference Date: Cancelled Solicitation Amendment Posted to Address Questions: 27 March 2020 Solicitation Question Window 2 Open: 31 March 2020 Solicitation Question Window 2 Due Date: 3 April 2020 Solicitation Amendment Posted to Address Questions: 10 April 2020 Proposal Submittal Date: 27 April 2020, no later than 1:00 p.m. Eastern Contract Award Date: ~17 December 2020 Post Award Conference: ~19 January 2021

Dates provided above preceded by an “~” represent an estimated date.

L.1.5 Proposal Validity

The proposal shall be valid for not less than 365 calendar days after the proposal submission date documented in Block 9 of the Standard Form 33 (SF 33).

L.1.6 Points of Contact

The Procuring Contracting Officer (PCO) for this solicitation is Mr. Duane A. St. Peter:

U.S. Army Contracting Command – Orlando Office: (407) 384-3889 ATTN: Duane A. St. Peter, Contracting Officer Email: duane.a.stpeter.civ@mail.mil Bravo Division (CCOR-CDD-B)

W900KK-20-R-0011

12211 Science Drive Orlando FL, 32826-3224

The ACC-ORL Contracting Center point of contact (POC) for this solicitation is Mr. David B. Hector:

U.S. Army Contracting Command – Orlando Telephone: (407) 384-3721 ATTN: David B. Hector, Contract Specialist Email: david.b.hector.civ@mail.mil Bravo Division (CCOR-CDD-B)

W900KK-20-R-0011

12211 Science Drive Orlando FL, 32826-3224

The Contracting Center alternate point of contact (APOC) for this solicitation is Mr. Ricardo Colón Acevedo:

U.S. Army Contracting Command – Orlando Telephone: (407) 208-3008 ATTN: Ricardo Colón Acevedo, Contract Specialist Email: ricardo.colonacevedo.civ@mail.mil Bravo Division (CCOR-CDD-B)

W900KK-20-R-0011

12211 Science Drive Orlando FL, 32826-3224

THE PCO, MR. DUANE A. ST. PETER, (407) 384-3889, AND THE DESIGNATED CONTRACT

SPECIALISTS (POC AND APOC) AS LISTED HEREIN ARE THE SOLE GOVERNMENT POINTS OF

CONTACT FOR THIS SOLICITATION.

L.1.7 General Guidance

L.1.7.1 This section provides general guidance for preparing proposals as well as specific instructions on the format and content of the proposal. The Offeror's proposal must include all data and information requested and must be submitted in accordance with these instructions. The Offeror shall not submit additional proposal information that is not specifically requested by this solicitation. Such additional proposal information will not be considered during the evaluation process. The Offeror’s proposal shall be compliant with these submission instructions (Section L) and shall meet requirements as stated for NCRC EPOS.

L.1.7.2 In presenting material in their proposal, Offerors are advised that quality of information is more important than quantity. The proposal shall be clear, concise, and shall include sufficient detail for effective evaluation and for substantiating the validity of stated assertions. Elaborate brochures or presentations, detailed art work and other documents beyond that sufficient to present a complete and effective proposal are unnecessary and are not desired.

L.1.7.3 The proposal shall be specific, detailed and complete as to clearly and convincingly demonstrate that the Offeror has a thorough understanding of the requirements and associated risks, and is able, willing, and competent to devote the resources necessary to meet the requirements and has valid and practical solutions for all requirements.

L.1.7.4 The proposal should not simply rephrase or restate the Government's requirements, but rather, shall provide convincing rationale to address how the Offeror intends to meet the NCRC EPOS requirements. Paraphrasing the Performance Work Statement(s) or parts thereof is inadequate, as are phrases such as “standard procedures will be employed” or “well-known techniques will be used.”

L.1.7.5 Clarity and readability are very important. The Government will not infer meanings from vague or ambiguous language. Statements that the prospective Offeror understands, can or will comply with the specifications are considered inadequate and unsatisfactory. Mere reiteration of the requirement or standard reference material is discouraged and may be considered inadequate and non-compliant. It is the Offeror’s responsibility to present enough information to be meaningfully evaluated without discussions.

L.1.7.6 Offerors must assume any data they have previously submitted in response to another solicitation, whether to: Department of Defense Test Resource Management Center (TRMC), the Program Executive Office for Simulation, Training and Instrumentation (PEO STRI), Project Manager Cyber, Test, and Training (PM CT2) [previously known as Project Manager Instrumentation, Targets, Threat Simulators, and SOF Training Systems (PM ITTS)], U.S. Army Contracting Command – Orlando (ACC-ORL), or another agency should be assumed unavailable during this proposal evaluation and source selection process. Proposal data shall not be incorporated into the proposal by referring to another proposal or other source. Any references to sources not provided with an Offeror’s proposal will not be considered.

L.1.8 Offerors shall assume that the Government has no prior knowledge of their facilities and experience. The Government will base its evaluation on only the information presented in the Offeror’s proposal and information received in support of the past performance evaluation. The use of hyperlinks in any document that link to material outside of that document is prohibited. The Government will not assume that an Offeror has proposed anything that is not expressly stated in its proposal.

OFFERORS ARE HEREBY ON NOTICE THAT THE GOVERNMENT WILL PERFORM AN INITIAL

ASSESSMENT OF ALL OF THE PROPOSALS RECEIVED FOR COMPLIANCE WITH THE

SOLICITATION REQUIREMENTS. A FAILURE TO SUBMIT ALL THE REQUIRED

DOCUMENTATION IN EXACTLY THE MANNER (TIMELINESS AND FORMAT) SPECIFIED IN THE

SOLICITATION MAY CONSTITUTE A BASIS FOR THE GOVERNMENT TO REJECT A PROPOSAL

AS NON-COMPLIANT AND THEREFORE UNEVALUATABLE AND MAY BE ELIMINATED FROM

THE COMPETITION WITHOUT FURTHER EVALUATION, AT THE SOLE DISCRETION OF THE

PROCURING CONTRACTING OFFICER

L.1.9 General Instructions

L.1.9.1 Submission of the digital proposal is due in accordance with paragraph L.1.4. The Government may issue one or more Solicitation Amendment(s) prior to the deadline for final proposal submissions based upon the questions received. However, the Government does not anticipate that the closing date for receipt of offers will be extended.

L.1.9.2 If an Offeror believes that the requirements in these instructions contain an error, omission, or are otherwise unsound, the Offeror shall immediately notify the PCO in writing with supporting rationale. Use of e-mail for PCO notification citing the solicitation number in the subject line is encouraged when a discrepancy is noted. A courtesy copy of all e-mail correspondence submitted to the PCO regarding discrepancies shall be provided to the POC and APOC. Please follow the e-mail with an immediate telephone call to the POC, APOC, or PCO. Upon receipt of this notification, the Government will provide a written response as soon as practicable.

L.1.9.3 Offerors shall not make any changes to the solicitation. Any objections to the terms and conditions of the solicitation should be addressed to the Contracting Officer prior to the Proposal Submittal Date. The Offeror shall identify any exceptions to the terms and conditions set forth in this solicitation, the remedy sought and the impact if the Government does not concur with the exceptions. The Offeror shall advise of any exceptions filed by their subcontractors and the Offeror’s resolution of the exceptions. The Government does not envision any changes to the terms and conditions and any changes proposed to the terms and conditions will not be accepted or made.

L.1.9.4 Questions and comments regarding the solicitation shall be submitted in writing using the NCRC EPOS Solicitation Comment Form, listed at Section J as Attachment 24. A separate NCRC EPOS Solicitation Comment Form shall be submitted for each question or comment.

L.1.9.4.1 If an Offeror perceives a question/comment may reveal proprietary or protected information, it must clearly mark the subject sentence or paragraphs and notify the Government that it considers the information proprietary. If the Government does not agree the information is proprietary the Government may choose not to respond to the question/comment.

L.1.9.4.2 If the Government deems one or more questions or comments are appropriate, the question(s)/comment(s) and a Government response will be published through the issuance of an update to the solicitation announcement prior to the deadline for final proposal submissions provided those questions are received by the due dates outlined in Paragraph L.1.4. Questions and/or Comments that result in a change to the solicitation shall be published to beta.SAM.gov as an amendment to the solicitation.

L.1.9.4.3 Offerors shall submit questions and comments regarding this solicitation by electronic mail addressed to all three POCs identified in Paragraph L.1.6 citing the solicitation number W900KK-20-R-0011 in the subject line.

L.1.9.4.4 Questions or comments may not be submitted via e-mail if the content reveals technical data that may be considered Export Controlled. Please submit Export Controlled related questions via DoD Secure Access File Exchange (SAFE) (https://safe.apps.mil/) provided that the files are unclassified. Offerors without Common Access Card (CAC) access will need to email ricardo.colonacevedo.civ@mail.mil and david.b.hector.civ@mail.mil to request a “Drop-off” link.

L.1.9.4.5 Questions and Comments received after the due dates outlined in Paragraph L.1.4 may not be answered prior to proposal submission or at all. Questions that are received after the first question window closes and before the second window opens will not be considered. Offeror’s are encouraged to review the contents of the Government’s answers to the questions before submitting any additional questions in the second question window.

Accordingly, Offerors are encouraged to carefully review all solicitation requirements and submit questions to the Government early in the proposal preparation cycle.

IN THE EVENT OF ANY CONFLICT BETWEEN THE RESPONSE TO QUESTIONS/COMMENTS AND THE

SOLICITATION, THE SOLICITATION (INCLUDING ANY AMENDMENTS) SHALL TAKE PRECEDENCE.

L.1.9.5 The Offerors shall ensure that each proposal Volume submitted contains only the information relevant to that specific Volume. The Offerors are cautioned that each Volume of the proposal is evaluated stand-alone against the criteria set forth in Section M of the solicitation and the evaluators for one Volume may be different than the evaluators of another Volume. It is incumbent upon the Offerors to ensure they properly submit their proposals. If the data is not contained in the appropriate Volume of the proposal it will not be evaluated.

L.1.9.6 The Government may reject any proposal that is evaluated to be unachievable in terms of program commitments and technical capability, including contract terms and conditions.

L.1.9.7 The successful Offeror will be required to comply with all aspects of the requirements documents for the NCRC EPOS contract, and Task Order 0001 for NITC resulting from this solicitation. Features offered beyond the requirements of this solicitation that are determined to be beneficial to the Government may be incorporated into the resultant contract/order and may result in an amendment to the PWS and other requirement documents for the contract/ order.

L.1.10 Government Furnished Information (GFI)

L.1.10.1 In support of proposal preparation, Offerors may submit a request to obtain Export Controlled / Controlled Unclassified Information (CUI) such as Performance Work Statements, Government provided Technical Data and other documents on the GFI List. The deadline for the initial request is 25 February 2020: establishment of a date is intended to streamline the delivery of documents when requested. Requests will be honored after 25 February 2020.

L.1.10.1.1 To obtain the GFI, all Offerors shall complete a NCRC EPOS Distribution Agreement (see Section J, Attachment 25). All initials and signatures on the NCRC EPOS Distribution Agreement must be hand-written:

typed entries will be considered non-compliant and the document will not be processed.

L.1.10.1.2 Offerors shall submit the completed NCRC EPOS Distribution Agreement to the POCs identified in Sections L.1.6, with the solicitation number in the subject line. The email shall also include a copy of the Offeror’s current DD Form 2345 that has been approved by the Defense Logistics Agency Joint Certification Program (DLA

JCP).

L.1.10.1.3 The Government intends to distribute GFI electronically via DoD SAFE to the Data Custodian named in Block 3a on the Offeror’s current DD Form 2345 that has been approved by (DLA JCP). The GFI will be delivered to the e-mail address listed in Block 3d on the DD Form 2345.

L.1.10.1.4 The Offeror’s Data Custodian may appoint one person as an Alternate Data Custodian. Only the Requesting U.S. Department of Defense (DoD) Contractor Authorized Technical Point of Contact (POC), or Alternate Requesting U.S. DoD Contractor Authorized POC named on the NCRC EPOS Distribution Agreement may be appointed as an Alternate Data Custodian. A written notice of the appointment shall be provided by the Data Custodian via e-mail to the POCs identified at L.1.6 when the request for GFI is submitted with the NCRC EPOS Distribution Agreement and DD Form 2345 attached. When an Alternate Data Custodian is identified by name, an e-mail address and telephone number must be provided. The GFI will only be distributed to the designated alternate.

L.1.10.1.5 The Government will only disseminate GFI to the Offeror. The Offeror is the prime contractor that intends to sign the Standard Form 33 in Block 17 and submit its proposal to the Government.

L.1.10.1.6 The Offeror shall be responsible for managing the GFI in accordance with the NCRC EPOS Distribution Agreement. The Offeror may obtain Government approval to release the GFI to subcontractors. To obtain approval, the Offeror must submit a copy of the subcontractor’s current DD Form 2345 that has been approved by DLA JCP. A request for approval to release GFI to subcontractors shall be submitted at the same time the Offeror submits their own NCRC EPOS Distribution Agreement and DD Form 2345. The e-mail request to release GFI must include a complete list of subcontractors at all levels/tiers.

L.1.10.1.7 The Offeror must flow down a copy of their approved NCRC EPOS Distribution Agreement to each subcontractor that will receive GFI when distributing documents referenced in the agreement. Subcontractors at all levels shall comply with the terms and conditions in the NCRC EPOS Distribution Agreement. The Offeror’s Data Custodian/Alternate Data Custodian shall be responsible for distributing GFI and a copy of the approved NCRC EPOS Distribution Agreement to subcontractors.

NOTE: EXPORT CONTROLLED TECHNICAL DATA MAY NOT UNDER ANY CIRCUMSTANCE BE

DISTRIBUTED VIA E-MAIL.

L.1.10.1.8 The GFI available for proposal preparation is to be provided by the Government as a courtesy and is made available only for those approved Offerors and subcontractors that wish to utilize it for proposal assistance.

The Government will not guarantee that the data made available represents the most recent version or that it conveys a complete system, subsystem or architecture. Offerors shall not assume or expect that any data provided constitutes technical direction on the part of the Government. This information is provided only for the purpose of assisting Offerors in gaining a better understanding from a technical perspective. The Government will not accept responsibility for any errors or misleading assumptions proposed by the Offerors from information derived from the

GFI.

L.1.10.2 Security Clearance Requirements

Contractor employees working under the resultant contracts/orders must have, at a minimum, Secret Security Clearance issued by the U.S. Government. Orders placed under each contract may require clearances for Top Secret/Sensitive Compartmentalized Information (TS/SCI): specific security clearance requirements shall be identified in the associated Performance Work Statement (PWS) and DD Form 254, entitled Department of Defense (DoD) Contract Security Classification Specification. Some of the efforts under this contract are subject to International Traffic in Arms Regulation (ITAR), and are export controlled. Therefore, this acquisition is restricted to responsible U.S. DoD contractors only.

L.1.11 Classified Information

Classified information shall not be provided in this solicitation or in any Government Furnished Information (GFI) provided under this solicitation. Classified information is not required in the Offeror’s proposal, or any response to this solicitation, nor shall it be submitted. Additionally, each page of the technical volume shall be marked “Unclassified/For Official Use Only”.

L.1.12 Discussions and Competitive Range Approaches

L.1.12.1 In accordance with FAR Clause 52.215-1, entitled Instructions to Offerors – Competitive Acquisition, the Government may evaluate proposals and make awards without conducting discussions with Offerors (except Clarifications as described in FAR Subpart 15.306(a)). Therefore, the Offeror’s initial proposal should contain the Offeror’s best terms.

L.1.12.2 If the Source Selection Authority (SSA) determines that discussions are necessary, then a competitive range will be established by the PCO before entering into discussions.

L.1.12.3 Discussion format (written, face-to-face, or teleconference), is at the sole discretion of the Contracting Officer. If discussions are conducted face-to-face, or via teleconference, the PCO will schedule the discussion sessions, and each Offeror will be notified of the time and place at least five (5) business days prior to their discussion session. The PCO will provide additional instructions with the notification. Discussions may take place at a facility of the Government’s choosing in Orlando, Florida.

L.1.13 Determination of Competitive Range

L.1.13.1 Proposals shall be evaluated in accordance with FAR 15.305(a), and, if discussions are to be conducted, establish the competitive range. Based on the ratings of each proposal against all evaluation criteria, the Contracting Officer shall establish a competitive range comprised of all of the most highly rated proposals, unless the range is further reduced for purposes of efficiency pursuant to paragraph (c)(2) of this section.

L.1.13.2 After evaluating all proposals in accordance with FAR 15.305(a) and FAR 15.306(c)(1), the Contracting Officer may determine that the number of most highly rated proposals that might otherwise be included in the competitive range exceeds the number at which an efficient competition can be conducted. Pursuant with FAR 52.215-1(f)(4)), the Contracting Officer may limit the number of proposals in the competitive range to the greatest number that will permit an efficient competition among the most highly rated proposals (10 U.S.C. 2305(b)(4) and 41 U.S.C. 3703).

L.1.14 Debriefings

The PCO will promptly notify Offerors of any decision to exclude them from the competitive range in accordance with FAR 15.503(a), whereupon they may request and receive a debriefing in accordance with FAR 15.505. Upon award of the NCRC EPOS contracts and NITC Task Order 0001, the PCO will notify unsuccessful Offerors in the competitive range of the source selection decision in accordance with FAR Subpart 15.503(b). Upon such notification, unsuccessful Offerors may request and receive a debriefing in accordance with FAR 15.506. Offerors desiring a debriefing must make their request in accordance with the requirements of FAR 15.505 or FAR 15.506, as applicable. Debriefing format is at the sole discretion of the Contracting Officer.