App_A-2_Technical_References.pdf
PDF 492 KB Posted
- Attached to
- Renovation of Regional Training Center, (RTC) Jalalabad Female Compound Nangarhar Province, Afghanistan
- Solicitation number
- W5J9JE-15-R-0018
About this file
Appendix A-2 Technical References
View the file
Other files
Show all 31
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
APPENDIX A-2
TECHNICAL REFERENCES
Regional Training Center (RTC) Jalalabad - New Female Compound Nangarhar Province, Afghanistan
Solicitation No. W5J9JE-15-R-0018
Appendix A-2 - Page 1
APPENDIX A-2
TECHNICAL REFERENCES
1.0 GENERAL
Refer to Section 01015 TECHNICAL REFERENCES for application of codes and technical criteria included below. This list is not exhaustive and is not necessarily complete. The publications to be taken into consideration shall be those of the most recent editions. Additional references are listed in the Appendix A-1
SPECIFICATIONS.
2.0 LIST OF CODES AND TECHNICAL CRITERIA
2.1 STANDARDS
A/E/C CAD Standards, V4.0 (or newer) available online at:
https://cadbim.usace.army.mil/default.aspx?p=s&t=13&i=4
2.2 GENERAL CONSTRUCTION
ACI 318 Building Code Requirements for Structural Concrete (latest edition), American Concrete Institute
ACI 530/ASCE 5/TMS 402 Building Code Requirements for Masonry Structures (latest edition) AISC 360 Specification for Structural Steel Buildings (latest edition), American Institute of Steel Construction
ASCE 7 Minimum Design Loads for Buildings and Other Structures (latest edition)
ASTM American Society for Testing and Materials
ASTM-D-1586 Standard Test Method for Standard Penetration Test
ASTM-D-5299 Standard Guide for Decommissioning Ground Water Wells
AWS D1.1 Structural Welding Code – Steel (latest edition), American Welding Society
BS 7671 British Standards Requirements for Electrical Installations (IEE Wiring regulations, 17th Edition)
EIA ANSI/TIA/EIA-607 (1994) Commercial Building Grounding/Bonding Requirement Standard
Factory Mutual (FM) Approval Guide-Fire Protection, latest edition
IBC International Building Codes, 2009 edition
(and its referenced codes including those inset below)
IEEE C2 National Electrical Safety Code (NESC), latest edition
IFGC International Fuel Gas Code, latest edition
IMC International Mechanical Code, latest edition
IPC International Plumbing Code, latest edition
Lighting Handbook IESNA, latest edition
International Mine Action Standards latest edition see http://www.mineactionstandards.org for copy of standards
Regional Training Center (RTC) Jalalabad - New Female Compound Nangarhar Province, Afghanistan http://www.mineactionstandards.org/
Appendix A-2 - Page 2
TM 5-802-1 Economic Studies
TM 5-805-4 Noise and Vibration
TM 5-811-1 Electrical Power Supply and Distribution
2.3 FIRE PROTECTION AND LIFE SAFETY
NFPA 1 General Fire Protection, latest edition
NFPA 10 Portable Fire Extinguishers, latest edition
NFPA 72 National Fire Alarm Code, latest edition
NFPA 75 Standard for the Protection of Information Technology Equipment
NFPA 80 Fire Rated Doors and Windows, latest edition
NFPA 101 Life Safety Code, latest edition
NFPA 110 Standard for Emergency and Standby Power Systems, latest edition
Underwriters' Laboratories (UL) Fire Protection Equipment Directory (2010)
2.4 UL STANDARDS (AS APPLICABLE)UNIFIED FACILITIES CRITERIA
Unified Facility Criteria (UFC) is available online at:
http://www.wbdg.org/ccb/browse_cat.php?o=29&c=4
Edition in effect at time of contract award will be used with this project.
UFC 1-200-01 Design: General Building Requirements
UFC 1-300-07A Design Build Technical Requirements
UFC 1-300-09N Navy and Marine Corps Design Procedures
UFC 3-201-01 Civil Engineering
UFC 3-230-01 Water Storage, Distribution, and Transmission
UFC 3-230-06a Subsurface Drainage
UFC 3-240-01 Wastewater Collection
UFC 3-240-03N Wastewater Treatment Systems: Augmenting Handbook, Operation and Maintenance
UFC 3-240-02 Domestic Wastewater Treatment
UFC 3-301-01 Structural Engineering
UFC 3-410-01 Heating, Ventilating and Air Conditioning Systems
UFC 3-420-01 Plumbing Systems
UFC 3-460-01 Design: Petroleum Fuel Facilities
UFC 3-501-01 Electrical Engineering
UFC 3-520-01 Interior Electrical Systems
UFC 3-530-01 Interior and Exterior Lighting Systems and Controls
UFC 3-540-01 Engine-Driven Generator Systems for Backup Power Applications
Regional Training Center (RTC) Jalalabad - New Female Compound Nangarhar Province, Afghanistan http://www.wbdg.org/ccb/browse_cat.php?o=29&c=4
Appendix A-2 - Page 3
UFC 3-550-01 Exterior Electrical Power Distribution
2.5 USACE-AED DESIGN REQUIREMENTS
In addition, technical criteria provided in USACE-AED Design Requirements (most recent version) shall be required for use in design and construction specifications as indicated in the following documents. The following design criteria shall be used:
AED Design Requirements
Voltage Drop Calculations Process
Breaker and Conductor Sizing
Site Layout Guidance
Water Tanks and System Distribution
Booster Pumps, latest version Chlorinators
Jockey Pumps, latest version Hydrology
Sanitary Sewer and Septic System
Geotechnical Investigations
CADD Design Guide
Mechanical & Plumbing Guide
Edition in effect at time of contract award will be used with this project.
2.6 APPLICABLE SPECIFICATIONS
The Publications listed below form a part of this specification to the extent referenced. The publications are referred to in the text by designation only.
UFC 1-200-01 Design: General Building Requirements
Office Equipment Form 522
American National Standards Institute/Telecommunications Industry Association/Electronics Industry Association
ANSI TIA/EIA 606-A Administration Standard for The Telecommunications Infrastructure
ANSI TIA/EIA 607-A Commercial Building Grounding (Earthing) and Bonding Requirements for Telecommunications, (latest edition)
ANSI TIA/EIA 607-A Commercial Building Grounding (Earthing) and Bonding Requirements for Telecommunications, (latest edition)
ANSI TIA/EIA 568 Commercial Building Telecommunications Cabling Standard, (latest edition)
ANSI TIA/EIA 569-B Commercial Building Standard for Telecommunications Pathways and Spaces, (latest edition)
2.7 OTHER STANDARDS
Standards other than those mentioned above may be accepted if the standards chosen are internationally recognized and meet the minimum requirements of the specified standards. The Contractor shall be prepared to submit proof of this if requested by the Contracting Officer.
Regional Training Center (RTC) Jalalabad - New Female Compound
Appendix A-2 - Page 4
-END OF SECTION-
Regional Training Center (RTC) Jalalabad - New Female Compound
| A-2 Technical References |
| APPENDIX A-2 |
| TECHNICAL REFERENCES |
App A-2 Technical Refs RTC J-Bad
File details come from the government source that posted it. Updated .