Attachment 0003_MEO B2918.pdf

MAINTENANCE ENGINEERING ORDER

(AMCOM Reg. 750-2)

MEO NO.

DATE PAGE 1 of

TITLE Tolerances Unless otherwise noted, dimensions are in inches and tolerances are:

Fractional ………………… ± 1/32 Decimal ………………... ± 0.010 Angular ………………… ± ½°

APPLICABILITY CSI Critical Characteristic Affected?

Impact Statement Attached?

REFERENCES FOR RDECOM USE ONLY

DOCUMENT(S) AFFECTED

PURPOSE OR PROBLEM

PROJECT ENGINEER ENGINEERING REVIEW ENGINEERING RELEASE

MED FORM 5-DEC-09 1401-R-E

AR 70-62 •11 May 2016 B 2918

Sep 21, 2017 1

Main Landing Gear Shock Strut Assembly CSI Update 70250-12051-044 70250-12051-045 70250-12051-048

Administrative

INTERIM USE OF THIS MEO IS AUTHORIZED

UNTIL AFFECTED DOCUMENT IS UPDATED.

MEO CHANGE TYPE

4) Normal - Can be implemented with normal priorityPRIORITY IMPLEMENTATION CATEGORY

UH60 DAA

DMWR 1-1620-247 dated 21 July 2017 TN 177671

DOCUMENT CHANGE IS REQUIRED Verification: Hands-On Table-Top None

Update CSI content.

KERNAN.JAMES.

J.JR.1258452760

Digitally signed by

KERNAN.JAMES.J.JR.1258452760

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USA, cn=KERNAN.JAMES.J.JR.1258452760 Date: 2017.09.05 11:15:44 -05'00'

GUERRA.ROBER

TO.JR.12868780

Digitally signed by

GUERRA.ROBERTO.JR.1286878012

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=CONTRACTOR, cn=GUERRA.ROBERTO.JR.1286878012 Date: 2017.09.01 15:42:13 -05'00'

Roberto Guerra, Jr.

HORN.REINHOL

D.J.1087783495

Digitally signed by

HORN.REINHOLD.J.1087783495

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USA, cn=HORN.REINHOLD.J.1087783495 Date: 2017.09.05 15:43:04 -05'00'

James Kernan Ron Horn PUBLICATION CHANGE REQUEST: REQUEST THAT THE FOLLOWING DATA BE INCLUDED IN THE NEXT

CHANGE OR REVISION TO THE PUBLICATION IDENTIFIED ABOVE.

WP NO. PAGE

NO.

PARA-

GRAPH

FIGURE/

TABLE

NO.

CHANGES

(EXACT WORDING OF CHANGES MUST BE GIVEN)

REPLACE all paragraphs under CRITICAL SAFETY ITEM (CSI) PROGRAM section with "This DMWR is not impacted by the Critical Safety Item (CSI) Program."

REPLACE under the QUALITY ASSURANCE/QUALITY CONTROL DOCUMENTS section, the title for AMCOMR 702-7 to read: "Aviation Critical Safety Items, Critical Application Items, and New Source Testing"

Distribution Statement D:- Distribution authorized to Department of Defense and U.S. DoD contractors only to protect critical technology effective as of 26 June 2014. Other requests for this document must be referred to U.S. Army Aviation and Missile Research, Development and Engineering Center, ATTN: RDMR -AEM , Corpus Christi, TX 78419-5211

MED FORM 04 APR 2017