Product Engineering Requirements updated .pdf

PRON: EH9L0345EH DATE: 31 May 2019

REVIEW AND CERTIFICATION OF TECHNICAL DATA PACKAGE

SECTION 1

[ ] PRIORITY PROCESSING REQUIRED SUSPENSE DATE:

_______N/A________

ORIGINATOR:

__________N/A________

TDP REVIEW REQUEST

PRON: EH9L0345EH NSN: 5180-01-677-6455 PRON DATE: 31 May 2019

Item Nomenclature: Tool Kit, Carpenter’s

Procurement Activity: [ ] Rock Island: [ ] Edgewood [ ] Picatinny: [X] DLA

[ ] Major Item Review is Required [ ] Secondary Item Review Required

ENCLOSED DOCUMENTATION:

[ ] TDP/Product Engineering Documents

[X] Procurement Request

[ ] Technical Data Discrepancy Suspense Notice (AMSMC Form 1551)

[X] PART I - SECTION C & D (Hard Copy)

Supplemental data and certification of subject TDP must be received by ___N/A_________ NTL Suspense Date Above. If item is to be sole source, the engineering activity (when responsible) shall complete a Non-Competitive Procurement-Availability of Competitive Data Package form as cited in CM Policy Memo 59A and enclose with this form.

[ ] Justification and Approval for Other Than Full and Open Competition

[ ] Replenishment/Spare/Repair Parts Breakout Price Cost Verification

[ ] Noncompetitive Procurement - Availability of Technical Data Package Form

[ ] Availability of Qualification Procedures on Source Controlled Top Drawings Form

[ ] Substantiation For Brand Name or Equal Procurement Form

[X] AMSTA-AR-EST-P Form 3071 - ODC

[ ] Solicitation Waiver Justification

PRON: EH9L0345EH NSN NO: 5180-01-677-6455 PRON DATE: 31 May 2019

SECTION 2

IDENTIFICATION OF CONDITIONS FOR SPECIAL CONTRACT CLAUSES.

ENGINEERING ACTIVITY/PRODUCT ASSURANCE DIRECTORATE WILL COMPLETE THE

FOLLOWING

THIS ITEM INCLUDES (REFERENCE CM POLICY MEMO NO. 69 FOR DEFINITION):

PHOSPHATE COATINGS

Jewel Bearings Light Phosphate TT-C-490 (Finish Series 5.1 of MIL-STD-171)

Ball Bearings Pre-Treatment Coating TT-C-490 (Finish Series 5.2 of MIL-STD-171)

Forgings/Casting Heavy Phosphate DOD-P-16232 (Finish Series 5.3 of MIL-STD-171)

Specialty Metals Other Phosphate Coatings Precious Metals

[ ] Precision Components for Mechanical Time Devices.

[ ] Special Tooling/Processes that are required:

List:

[ ] Hazardous Component Safety Data Statement is required.

[ ] Hazardous material in end product (Environmental laws apply) [ ] Hazardous waste in production (Environmental laws apply)

[ ] Deliverable data (Work Task) for contract Section C and CDRL DD Form 1423 is required.

[ ] MIL-STD-2000A Supplementary Requirements apply.

MASTERS

[ ] (SB) Production Stable Base Drawings (For Printed Wiring Boards)

Duplicate Master(s) will be available _____ days after PCO request.

[ ] (SB) Undimensioned Stable Base Dwgs(For Reticles, Identification Plates, etc)

Duplicate Master will be available ______ days after PCO request.

[ ] (CS) Magnetic Media (For Embedded Software - Defined by Software Control Drawing)

Duplicate Master(s) will be available _____ days after PCO request.

PRON: EH9L0345EH NSN NO: 5180-01-677-6455 PRON DATE: 31 May 2019

SECTION 3

CERTIFICATION STATEMENT

[X] Subject TDP has been determined to be adequate for competitive procurement.

[ ] Subject TDP is not adequate for fully competitive procurement. Non-Competitive

Procurement - Availability of Competitive Data Package form is enclosed.

[ ] Subject TDP is not adequate for competitive procurement. Someone other than the Engineering Activity (or

PAD) is responsible for providing the Non-competitive Procurement - J&A

[ ] Subject TDP is not an AMCCOM TDP. Certification (and Non-competitive Procurement justification if applicable) must be obtained from

CERTIFICATION SIGNATURES/CONCURRENCE

Eng Act Kyle Roeser Kyle Roeser 31 May 2019 FCDD-ACE-LTC 793-3999 printed name signature/concurrence date office sym DSN phone

QESA Reinaldo Colon Reinaldo Colón 31 May 2019 FCDD-ACE-QM 880-2423 printed name signature/concurrence date office sym DSN phone

PKG Joe Hanssen Joe Hanssen 04 June 2019 FCDD-ACE-LTP 793-8203 printed name signature/concurrence date office sym DSN phone

CMGR Jenny Miller Jenny Miller 5 June 2019 FCDD-ACE-LTC 793-8151 printed name signature/concurrence date office sym DSN phone

COMMENTS:

SOURCE CONTROL/VENDOR ITEM VERIFICATION

Drawing No. _____________________ Vendor Part No. Verified ____________________

SECTION C COVER SHEET

NSN: 5180-01-677-6455 PART NO.: 0414A0000

NOMEN: Tool Kit, Carpenter’s PRON(S): EH9L0345EH

The attached Part I - Section C, Product Engineering and Quality Engineering Requirements and Part I - Section D Packaging Requirements shall be incorporated into solicitation/contract for the above listed PRONS(s).

Army TDPL 0414A0000:59678, dated 4 June 2019.

SMCAR Form 3071 - ODC

NAME (POC): Kyle Roeser OFFICE: FCDD-ACE-LTC

PHONE DSN 793-3999 COMMERCIAL (309) 782-3999 DATE: 31 May 2019

RESUBMITTAL: N

SECTION C COVER SHEET (Continued)

NSN: 5180-01-677-6455

PRON: EH9L0345EH

ITEM: Tool Kit, Carpenter’s

TECHNICAL STATEMENTS, CERTIFICATION & APPROVAL FOR

CLASS I OZONE-DEPLETING CHEMICALS (ODC)

Tool Kit, Carpenter’s (Description of Supply/Item/Services being procured)

Based on a comparison of the specifications, standards, and National Stock Numbers(NSN) contained in the Procurement Request Document(PRD) reviewed, e.g., Technical Data Package, to the DOD list of specifications, standards and NSN that reference the use of Class I ODC, a technical evaluation was conducted, and I do hereby state to the contracting officer that to the best of my knowledge and belief: (check one or more items in Part I as appropriate and complete the signature block in Part I; complete the signature blocks in Part III only if Item 4 in Part I is checked).

PART I

1. ____ No further ODC review is required because this PRD is for a commercial or Government item, and this PRD does not contain any specifications, standards, NSN, or requirements that can only be met through the use of Class I ODC.

2. X The specifications, standards, or NSN contained in the PRD do not require the use of Class I ODC, and there are no requirements that can only be met through the use of such a substance in this PRD.

3. ____ Replacement substances or alternative technologies have been incorporated into this PRD where applicable; therefore, this PRD no longer contains any Class I ODC requirements or contractual requirements that can only be met through the use of such a substance. (If this item is checked and this review applies to a modification to an existing contract, complete Part II).

4. ____ This PRD contains specifications, standards, and/or NSN that require the use of Class I ODC, or requirements that can only be met through use of such a substance as identified in Part II. (If this item is checked, complete Part II and Part III).

SMCAR FORM 3071, 29 Apr 94

NSN: 5180-01-677-6455

5. COMMENTS: Comments on above checked items which identify any special circumstances about this review may be provided below. The addition of comments does not mitigate the requirement to properly review and certify the PRD. The signature of an Approved Technical Representative (ATR) is required in Part I, immediately below the Technical Evaluator's signature, only if comments are provided. If additional space is required, attachments may be used.

Signature: Kyle Roeser (Technical Evaluator)

Printed Name Kyle Roeser Office Symbol FCDD-ACE-LTC Date _31 May 2019 DSN# 793-3999

Signature: _______________________________________ (Approved Technical Representative)

Printed Name ____________________________________ Office Symbol ___________________________________ Date _____________________ DSN# _________________

NSN: 5180-01-677-6455

PRON: EH9L0345EH

ITEM: Tool Kit, Carpenter’s

PART II

If this review applies to a new contract, complete letters a. through e. If this review applies to a modification to an existing contract, complete letters a. through c. and f. through i., and provide a copy of this certification to an

ATR.

a. Specification/Standard/NSN/ODC Requirement:

b. Chemical Name:

c. ODC Application:

d. Estimated Poundage of ODC Used:

e. Duration of ODC Use:

f. Potential Substitutes/Alternative Technologies Evaluated:

g. Substitutes/Alternative Technologies Approved for Use:

h. Estimated Poundage of ODC Being Avoided:

i. Program/Function:

Contractor's Name:

Contract Number:

NSN: 5180-01-677-6455

PART III

I hereby certify that suitable (and economically feasible in the case of a modification to an existing contract) substitutes or alternative technologies for the Class I ODC requirement(s) listed in Part II for the specific applications and processes covered in this PRD are not currently available.

(Approved Technical Representative)

Based upon the above certification of the Approved Technical Representative, I hereby approve the use of specifications, standards, and/or NSN that require the use of Class I ODC, or requirements that can only be met through the use of such a substance for this PRD.

(Senior Approval Official)

PART I - SECTION C - DESCRIPTION/SPECIFICATIONS

In addition to the Item Description, Drawing(s) and/or Specification(s) listed below, Preservation/Packaging/Packing and Inspection and Acceptance documents are contained elsewhere herein (Sections D & E respectively).

PRODUCT ENGINEERING REQUIREMENTS

The following Item Description, Drawing(s) and/or Specification(s) represent minimum Government requirements and are applicable to this Procurement.

National Stock Number (NSN): 5180-01-677-6455 Tool Kit, Carpenter’s In accordance with Army Technical Data Package List (TDPL) 0414A0000:59678, dated 4 June 2019.

With the following exceptions:

Army Drawing 0414A0001, Rev “-“, dated 2018-10-04, Page 1, Zone C3, REMOVE:

END ITEM NSN: 5180-01-499-3548

and REPLACE WITH:

END ITEM NSN: 5180-01-677-6455

Army Drawing 0414A0001, Rev “-“, dated 2018-10-04, Page 1, Zone C1-2, REMOVE:

END ITEM NSN: 5180-01-499-3546

and REPLACE WITH:

END ITEM NSN: 5180-01-677-6455

Army Drawing 0414A0001, Rev “-“, dated 2018-10-04, Page 1, Zone C1-2, REMOVE:

Specification Data: ARDEC TDP 0414A0000:59678 and REPLACE WITH:

Specification Data: 0414A0000:59678

Army Drawing 0414A0001, Rev “-“, dated 2018-10-04, Page 1, Zone B3-4, REMOVE:

Specification Data: ARDEC TDP 0414A0000:59678 and REPLACE WITH:

Specification Data: 0414A0000:59678

Army Drawing 0414B0000, Rev “-“, dated 2018-10-04, Page 1, Zone B1-2 and C1-2, Note 8, REMOVE

THE TOOL CHEST LID SHALL HAVE NO LESS THAN TWO HANDLES OR GRASPS

POSITIONED ON THE LID, ONE AT EACH OF THE NARROWER ENDS, TO ALLOW TWO

USERS TO WORK TOGETHER TO REMOVE IT.

and REPLACE WITH

THE TOOL CHEST LID SHALL HAVE NO LESS THAN TWO HANDLES OR GRASPING

FEATURES POSITIONED ON THE LID, ONE AT EACH OF THE NARROWER ENDS, TO

ALLOW TWO USERS TO WORK TOGETHER TO REMOVE IT.

Army Drawing 0414B0000, Rev “-“, dated 2018-10-04, Page 2, Zone D3-4 and C3-4, Note 10, REMOVE:

WATER ENTRY RESISTANCE:

WHEN CLOSED AND FASTENED, THE CHEST SHALL WITHSTAND IMMERSION IN WATER,

WITHOUT WATER ENTRY, TO A DEPTH OF NO LESS THAN I METER (3.28 FEETI TO THE

UPPERMOST SURFACE OF THE CHEST FOR NO LESS THAN 30 MINUTES WHEN TESTED IN

ACCORDANCE WITH TEST METHOD 512.6 OF MIL-STD-810 THE CHEST SHALL BE

CONDITIONED SO THAT ITS TEMPERATURE IS NO LESS THAN 27'C (80.6'FI ABOVE THE

WATER TEMPERATURE PRIOR TO IMMERSION. THE CHEST SHALL BE TIED DOWN USING

THE HANDLES, THE TIE DOWN POINTS OR WEIGHTED WITH OTHER LOADED CHESTS

STACKED UPON THE TEST ITEM. PRIOR TO CONDITIONING AND TESTING, THE CHEST

SHALL HAVE BEEN UNLATCHED, OPENED, CLOSED AND RE-LATCHED NO FEWER THAN

10 TIMES. IF A RUBBERIZED SEAL IS USED TO MEET THE REQUIREMENTS, THEN IT

SHALL BE EASILY REPLACED WHEN DAMAGED IN THE FIELD.

and REPLACE WITH:

WATER ENTRY RESISTANCE:

WITH THE TOOL CASE IN A SHUT AND SEALED CONFIGURATION, TAKE A SOURCE OF

WATER FLOWING THROUGH A 0.75” UNRESTRICTED FLEXIBLE LINE (GARDEN HOSE)

WITH A PRESSURE NO LESS THAN 35 POUNDS PER SQUARE INCH AND RUN OVER ALL

SEAMS AND OPENINGS. RUN THE HOSE 12” ± 6” FROM THE TOOL CASE, DIRECTLY INTO

THE SEAMS AND INTO ANY OTHER POSSIBLE LEAK AREAS (E.G. THE HANDLES, WHEELS

OR RIVETS IF PRESENT). RUN THE HOSE OVER THE SEAMS AT A MODERATE SPEED.

WIPE DOWN THE EXTERIOR OF THE TOOL CASE, TO REMOVE ANY EXCESS WATER

THAT HAS POOLED BECAUSE OF THE TEST. EXAMINE THE INTERIOR OF THE TOOL CASE

AND CONFIRM THAT NO WATER HAS ENTERED. WATER ON THE GASKET MATERIAL

AND SEALS IS EXPECTED. IF A RUBBERIZED SEAL IS USED TO MEET THE

REQUIREMENTS, THEN IT SHALL BE EASILY REPLACED WHEN DAMAGED IN THE FIELD.

Army Drawing 0414C0000, Rev “-”, dated 2018-10-04, Page 1, Zone C2-4, REMOVE:

BOTTOM: RED

and REPLACE WITH

BOTTOM: CONTRASTING COLOR (EXAMPLE: RED, YELLOW, BLUE, OR GREEN)

Army Drawing 0700D0000, Rev “-”, dated 2018-10-04, Zone B3-4, Add source:

Part No.: 0700D0000-2 Name & Address:

Flambeau Products Corp 15981 Val Plast St Middlefield, OH 44062 CAGE code: 0A278 Vendor Part No.: V401 Vendor Description: Plastic Case

Army Drawing 0703C0000, Rev “-”, dated 2018-10-04, Zone B2-4, Add source:

Part No.: 0703C0000-5 Name & Address:

STANLEY PROTO INDUSTRIAL

2195 E VIEW PKWY STE 103

CONYERS, GA 30013

CAGE code: 1CV05 Vendor Part No.: J5208H Vendor Description: SOCKET, 1/4 INCH, 3/8 INCH DRIVE

Army Drawing 0703C0001, Rev “-”, dated 2018-10-04, Zone B2-4, Add source:

Part No.: 0703C0001-7 Name & Address:

STANLEY PROTO INDUSTRIAL

2195 E VIEW PKWY STE 103

CONYERS, GA 30013

CAGE code: 1CV05 Vendor Part No.: J5210H Vendor Description: SOCKET, 5/16 INCH, 3/8 INCH DRIVE

Army Drawing 0703C0003, Rev “-”, dated 2018-10-04, Zone B2-4, Add source:

Part No.: 0703C0003-7 Name & Address:

STANLEY PROTO INDUSTRIAL

2195 E VIEW PKWY STE 103

CONYERS, GA 30013

CAGE code: 1CV05 Vendor Part No.: J5212H Vendor Description: SOCKET, 3/8 INCH, 3/8 INCH DRIVE

Army Drawing 0703C0004, Rev “-”, dated 2018-10-04, Zone B2-4, Add source:

Part No.: 0703C0004-7 Name & Address:

STANLEY PROTO INDUSTRIAL

2195 E VIEW PKWY STE 103

CONYERS, GA 30013

CAGE code: 1CV05 Vendor Part No.: J5214H Vendor Description: SOCKET, 7/16 INCH, 3/8 INCH DRIVE

Army Drawing 0703F0000, Rev “-”, dated 2018-10-04, Zone B2-4, Add source:

Part No.: 0703F0000-2 Name & Address:

STANLEY PROTO INDUSTRIAL

2195 E VIEW PKWY STE 103

CONYERS, GA 30013

CAGE code: 1CV05 Vendor Part No.: J76931 Vendor Description: MAGNETIC BIT HOLDER

Army Drawing 0713E1000, Rev “-”, dated 2018-10-04, Zone B2-4, Add source:

Part No.: 0713E1000-2 Name & Address:

SEAHAWK ENTERPRISES LLC

2033 SAINT MICHAEL CT S

HIGHLAND, IL 62249

CAGE code: IPG17 Vendor Part No.: 181ML-KIP Vendor Description: MULTIPURPOSE TOOL

Army Drawing 0718A1002 , Rev “-”, dated 2018-10-04, Zone B3-4 , Add source:

Part No.: 0718A1002-7 Name & Address:

(PRO AMERICA) AMERICAN KAL ENTERPRISES, INC.

DBA PRO AMERICA PREMIUM TOOLS

4265 PUENTE AVE

BALDWIN PARK, CA 91706-3420

CAGE code: 60043 Vendor Part No.: 7008 Vendor Description: PLIERS, SLIP-JOINT, 8 INCHES

Army Drawing 0718E0000 , Rev “-”, dated 2018-10-04, Zone B2-4 , Add source:

Part No.: 0718E0000-7 Name & Address:

(PRO AMERICA) AMERICAN KAL ENTERPRISES, INC.

DBA PRO AMERICA PREMIUM TOOLS

4265 PUENTE AVE

BALDWIN PARK, CA 91706-3420

CAGE code: 60043 Vendor Part No.: 5028 Vendor Description: PLIERS, LINEMAN’S, 8 INCHES

Army Drawing 0718F0000, Rev “-”, dated 2018-10-04, Zone B3-4, Add source:

Part No.: 0718F0000-5 Name & Address:

IRWIN INDUSTRIAL TOOL COMPANY

92 GRANT ST

WILMINGTON, OH 45177

CAGE code: 1JU00 Vendor Part No.: 6LN Vendor Description: PLIERS, LOCKING, LONG NOSE, 6 INCH

Army Drawing 0718F0001, Rev “-”, dated 2018-10-04, Zone B3-4, Add source:

Part No.: 0718F0001-5 Name & Address:

IRWIN INDUSTRIAL TOOL COMPANY

92 GRANT ST

WILMINGTON, OH 45177

CAGE code: 1JU00 Vendor Part No.: 10WR Vendor Description: PLIERS, LOCKING, 10 INCH

Army Drawing 0719B3000, Rev “-”, dated 2018-10-04, Zone B3-4, Add source:

Part No.: 0719B3000-3 Name & Address:

SIMONDS INDUSTRIES INC

INTERVALE RD

FITCHBURG, MA 01420

CAGE code: 54940 Vendor Part No.: 73-530500 Vendor Description: FILE, TAPER SAW

Army Drawing 0719C6000, Rev “-”, dated 2018-10-04, Zone B3-4, Add source:

Part No.: 0719C6000-4 Name & Address:

SIMONDS INDUSTRIES INC

INTERVALE RD

FITCHBURG, MA 01420

CAGE code: 54940 Vendor Part No.: 73-518500 Vendor Description: 3 SQUARE FILE

Army Drawing 0719D1000, Rev “-”, dated 2018-10-04, Zone B3-4, Add source:

Part No.: 0719D1000-3 Name & Address:

SIMONDS INDUSTRIES INC

INTERVALE RD

FITCHBURG, MA 01420

CAGE code: 54940 Vendor Part No.: 73-321000 Vendor Description: FILE, HALF ROUND

Army Drawing 0719D3001, Rev “-”, dated 2018-10-04, Zone B3-4, Add source:

Part No.: 0719D3001-3 Name & Address:

SIMONDS INDUSTRIES INC

INTERVALE RD

FITCHBURG, MA 01420

CAGE code: 54940 Vendor Part No.: 73-147500 Vendor Description: FILE, MILL

Army Drawing 0719D4000, Rev “-”, dated 2018-10-04, Zone # , Add source:

Part No.: 0719D4000-3 Name & Address:

SIMONDS INDUSTRIES INC

INTERVALE RD

FITCHBURG, MA 01420

CAGE code: 54940 Vendor Part No.: 73-400500 Vendor Description: FILE, ROUND

Army Drawing 0719J0000, Rev “-”, dated 2018-10-04, Zone B3-4, Add source:

Part No.: 0719J0000-3 Name & Address:

(NICHOLSON)

CRESCENT/COOPER TOOLS DIV

INDUSTRIAL PK

SUMTER, SC 29150

CAGE code: 72368 Vendor Part No.: 19427N Vendor Description: RASP, HALF ROUND

Army Drawing 0719K1001, Rev “-”, dated 2018-10-04, Zone B3-4, Add source:

Part No.: 0719K1001-3 Name & Address:

SIMONDS INDUSTRIES INC

INTERVALE RD

FITCHBURG, MA 01420

CAGE code: 54940 Vendor Part No.: 73-993500 Vendor Description: FILE CARD AND BRUSH

Army Drawing 0720A0003, Rev “-”, dated 2018-10-04, Zone B3-4, Add source:

Part No.: 0720A0003-5 Name & Address:

STANLEY BLACK & DECKER INC

505 N CLEVELAND AVE STE 200

WESTERVILLE, OH 43082

CAGE code: 76377 Vendor Part No.: J86A5/16S2 Vendor Description: 3/8” COLD CHISEL

Army Drawing 0720A0001, Rev “-”, dated 2018-10-04, Zone B3-4, Add source:

Part No.: 0720A0001-5 Name & Address:

STANLEY BLACK & DECKER INC

505 N CLEVELAND AVE STE 200

WESTERVILLE, OH 43082

CAGE code: 76377 Vendor Part No.: J86A7/16S2 Vendor Description: ½” COLD CHISEL

Army Drawing 0720A000, Rev “-”, dated 2018-10-04, Zone B3-4, Add source:

Part No.: 0720A000-5 Name & Address:

STANLEY BLACK & DECKER INC

505 N CLEVELAND AVE STE 200

WESTERVILLE, OH 43082

CAGE code: 76377 Vendor Part No.: J86A1/2S2 Vendor Description: 5/8” COLD CHISEL

Army Drawing 0720A0000, Rev “-”, dated 2018-10-04, Zone B3-4, Add source:

Part No.: 0720A0000-6 Name & Address:

STANLEY BLACK & DECKER INC

505 N CLEVELAND AVE STE 200

WESTERVILLE, OH 43082

CAGE code: 76377 Vendor Part No.: J86A5/8S2 Vendor Description: ¾” COLD CHISEL

Army Drawing 0720A0005, Rev “-”, dated 2018-10-04, Zone B3-4, Add source:

Part No.: 0720A0005-5 Name & Address:

STANLEY BLACK & DECKER INC

505 N CLEVELAND AVE STE 200

WESTERVILLE, OH 43082

CAGE code: 76377 Vendor Part No.: J86A3/4X8S2 Vendor Description: 7/8” COLD CHISEL

Army Drawing 0720A0006, Rev “-”, dated 2018-10-04, Zone B3-4, Add source:

Part No.: 0720A0006-5 Name & Address:

STANLEY BLACK & DECKER INC

505 N CLEVELAND AVE STE 200

WESTERVILLE, OH 43082

CAGE code: 76377 Vendor Part No.: J86A7/8X8S2 Vendor Description: 1” COLD CHISEL

Army Drawing 0720D0000, Rev “-”, dated 2018-10-04, Zone B3-4, Add source:

Part No.: 0720D0000-6 Name & Address:

STANLEY BLACK & DECKER INC

505 N CLEVELAND AVE STE 200

WESTERVILLE, OH 43082

CAGE code: 76377 Vendor Part No.: J413/8S2 Vendor Description: 3/8” CENTER PUNCH

Army Drawing 0720H0004, Rev “-”, dated 2018-10-04, Zone B3-4, Add source:

Part No.: 0720H0004-3 Name & Address:

MAYHEW

2 SEARS ST EXT

SHELBURNE FALLS, MA 01370

CAGE code: 39068 Vendor Part No.: 41300 Vendor Description: PRY BAR, COMBINATION

Army Drawing 0721E0000, Rev “-”, dated 2018-10-04, Zone B2-4, Add source:

Part No.: 0721E0000-2 Name & Address:

TRUSTY COOK INC

10530 E 59TH ST

INDIANAPOLIS, IN 46236-8333

CAGE code: 0ZGZ3 Vendor Part No.: S2 Vendor Description: DEAD BLOW, 24 OZ

Army Drawing 0728G0000, Rev “-”, dated 2018-10-04, Zone B3-4, Add source:

Part No.: 0728G0000-3 Name & Address:

JOHNSON LEVEL

6333 W DONGES BAY RD

MEQUION, WI 53092

CAGE code: 63474 Vendor Part No.: 3824 Vendor Description: 24” LEVEL

Army Drawing 0728K0002, Rev “-”, dated 2018-10-04, Zone B3-4, Add source:

Part No.: 0728K0002-3 Name & Address:

STANLEY BLACK & DECKER INC

505 N CLEVELAND AVE STE 200

WESTERVILLE, OH 43082

CAGE code: 76377 Vendor Part No.: 45-910 Vendor Description: CARPENTER’S SQUARE

Army Drawing 0728L0002, Rev “-”, dated 2018-10-04, Zone B3-4, Add source:

Part No.: 0728L0002-3 Name & Address:

US TAPE COMPANY INC

2452 QUAKERTOWN RD STE 300

PENNSBURG, PA 18703

CAGE code: 3Q4E7 Vendor Part No.: 57243 Vendor Description: TAPE, MEASURING, 25 FT

Army Drawing 0728M0001, Rev “-”, dated 2018-10-04, Zone B3-4 , Add source:

Part No.: 0728M0001-4 Name & Address:

KRAFT TOOL CO

8325 HEDGE LANE TER

SHAWNEE, KS 66227

CAGE code: 0N7U8 Vendor Part No.: BC360W Vendor Description: TWINE

Army Drawing 0731B0003, Rev “-”, dated 2018-10-04, Zone B3-4, Add source:

Part No.: 0731B0003-2 Name & Address:

MARSHALLTOWN COMPANY

104 S 8TH AVE

MARSHALLTOWN, IA 50158

CAGE code: 89838 Vendor Part No.: 16324 Vendor Description: SAW, JAB, WALLBOARD

Army Drawing 0731D0000, Rev “-”, dated 2018-10-04, Zone B3-4, Add source:

Part No.: 0731D0000-3 Name & Address:

(APEX)

CRESCENT/COOPER TOOLS DIV

INDUSTRIAL PK

SUMTER, SC 29150

CAGE code: 72368 Vendor Part No.: WK8V Vendor Description: UTILITY KNIFE

Army Drawing 0731J0002, Rev “-”, dated 2018-10-04, Zone B3-4, Add source:

Part No.: 0731J0002-3 Name & Address:

GREAT NECK SAW

165 E 2ND ST

MINEOLA, NY 11501

CAGE code: 72896 Vendor Part No.: SS169 Vendor Description: SAW, HAND

Army Drawing 0733E0002, Rev “-”, dated 2018-10-04, Zone B3-4, Add source:

Part No.: 0733E0002-3 Name & Address:

MARSHALLTOWN COMPANY

104 S 8TH AVE

MARSHALLTOWN, IA 50158

CAGE code: 89838 Vendor Part No.: PK860D Vendor Description: PUTTY KNIFE

Army Drawing 0733J1000, Rev “-”, dated 2018-10-04, Zone B3-4, Add source:

Part No.: 0733J1000-2 Name & Address:

KESON INDUSTRIES INC

810 COMMERCE ST

AURORA, IL 60504

CAGE code: 0NML2 Vendor Part No.: 8B Vendor Description: CHALK REFILL

Army Drawing 0733L0002, Rev “-”, dated 2018-10-04, Zone B3-4, Add source:

Part No.: 0733L0002-2 Name & Address:

STANLEY BLACK & DECKER INC

505 N CLEVELAND AVE STE 200

WESTERVILLE, OH 43082

CAGE code: 76377 Vendor Part No.: TR250 Vendor Description: COMBINATION STAPLE GUN BRAD NAILER

Army Drawing 0733L0003, Rev “-”, dated 2018-10-04, Zone B3-4, Add source:

Part No.: 0733L0003-2 Name & Address:

STANLEY BLACK & DECKER INC

505 N CLEVELAND AVE STE 200

WESTERVILLE, OH 43082

CAGE code: 76377 Vendor Part No.: TRA706T Vendor Description: 3/8” STAPLES

Army Drawing 0733L0004, Rev “-”, dated 2018-10-04, Zone B3-4, Add source:

Part No.: 0733L0004-2 Name & Address:

STANLEY BLACK & DECKER INC

505 N CLEVELAND AVE STE 200

WESTERVILLE, OH 43082

CAGE code: 76377 Vendor Part No.: TRA708T Vendor Description: ½” STAPLES

Army Drawing 0742A0000, Rev “-”, dated 2018-10-04, Zone B3-4, Add source:

Part No.: 0742A0000-2 Name & Address:

3M SAFETY

3 M CENTER, BLDG-225, 4-N-14

SAINT PAUL, MN 55144-0001

CAGE code: 06EF6 Vendor Part No.: 40651-00000 Vendor Description: SAFETY GLASSES

Army Drawing 0746A0000, Rev “-”, dated 2018-10-04, Zone B3-4, Add source:

Part No.: 0746A0000-2 Name & Address:

KESON INDUSTRIES INC

810 COMMERCE ST

AURORA, IL 60504

CAGE code: 0NML2 Vendor Part No.: LP72 Vendor Description: PENCIL, CARPENTER’S

Specifications and Standards referenced in the above cited applicable document(s) (drawings, part lists, and specifications) shall be the effective issue or revision in effect as listed in the Department of Defense ASSIST database, http://quicksearch.dla.mil/, as of 4 June 2019.

Packaging Requirements Sheet Commercial DS6421

NSN: 5180-01-677-6455

ITEM: Tool Kit, Carpenter’s

The preservation, packing, and marking requirements for the item identified above shall be accomplished in accordance with the performance requirements defined herein.

The following Packaging requirements shall apply:

PRESERVATION: COMMERCIAL

LEVEL OF PACKING: COMMERCIAL

QUANTITY PER UNIT PACKAGE:-001-

1 Packaging. Preservation, packaging, packing, unitization and marking furnished by the supplier shall provide protection for a minimum of one year, provide for multiple handling, redistribution and shipment by any mode and meet or exceed the following requirements.

1.1 Cleanliness. Items shall be free of dirt and other contaminants which would contribute to the deterioration of the item or which would require cleaning by the customer prior to use. Coatings and preservatives applied to the item for protection are not considered contaminants. Cleaning may be any suitable process that is not injurious to the item or the protective finish.

1.2 Preservation. Items susceptible to corrosion or deterioration shall be provided protection by means of preservative coatings, volatile corrosion inhibitors, desiccants, waterproof and or watervaporproof barriers.

1.3 Cushioning. Items requiring protection from physical and mechanical damage (e.g. fragile, sensitive, material critical) or which could cause physical damage to other items shall be protected by wrapping, cushioning, pack compartmentalization, or other means to mitigate shock and vibration to prevent damage during handling and shipment. Items of a delicate nature shall not be subjected to damage from rugged items contained within the kit. Non-critical items of odd shapes or having sharp protrusions will not damage other items or protective barriers.

2 Unit Package. A unit package shall be so designed and constructed that it will contain the contents with no damage to the item(s), and with minimal damage to the unit pack during shipment and storage in the shipping container, and will allow subsequent handling. The outermost component of a unit package shall be a container http://quicksearch.dla.mil/ such as a sealed bag, carton or box. Unit packs shall be designed to have minimum size and weight while retaining the protection required and enhancing standardization.

3 Unit Package Quantity. Unless otherwise specified, the unit package quantity shall be one each part, set, assembly, kit, etc.

4 Intermediate Package – (as applicable) Intermediate packaging is required whenever one or more of the following conditions exist:

a. the quantity is over one (1) gross of the same national stock number,

b. use enhances handling and inventorying,

c. the exterior surfaces of the unit pack is a bag of any type, regardless of size,

d. the unit pack is less than 64 cubic inches,

e. the weight of the unit pack is less than five (5) pounds and no dimension is over twelve (12) inches.

Intermediate containers shall be limited to a maximum of 100 unit packs, a net load of 40 pounds, or a maximum volume of 1.5 cubic feet, whichever occurs first.

5 Shipping Containers. Unit packages and intermediate packages not meeting the requirements for a shipping container shall be packed in shipping containers. All shipping containers shall be the most cost effective and shall be of minimum cube to contain and protect the items. The shipping container (including any necessary blocking, bracing, cushioning, or waterproofing) shall comply with the regulations of the carrier used and shall provide safe delivery to the destination at the lowest tariff cost. The shipping container shall be capable of multiple handling, stacking at least ten feet high, and storage under favorable conditions (such as enclosed facilities) for a minimum of one year.

6 Unitization. Shipments of identical items going to the same destination shall be palletized if they have a total cubic displacement of 50 cubic feet or more unless skids or other forklift handling features are included on the containers. Pallet loads shall be stable, and to the greatest extent possible, provide a level top for ease of stacking. A palletized load shall be of a size to allow for placement of two pallet loads high and wide in a conveyance. The weight capacity of the pallet shall be adequate for the load. The preferred commercial expendable pallet is a 40 x 48 inch, 4-way entry pallet although variations may be permitted as dictated by the characteristics of the items being unitized. All variations must be approved by the contracting office prior to implementation. The load shall be contained in a manner that will permit safe handling during shipment and storage.

7 Marking. All unit packages, intermediate packs, exterior shipping containers, and, as applicable, unitized loads shall be marked in accordance with MIL-STD-129, including bar coding and a MSL label. The contractor is responsible for application of special markings as discussed in the Military Standard regardless of whether specified in the contract or not. Special markings include, but are not limited to, Shelf-life markings, structural markings, and transportation special handling markings. The marking of pilferable and sensitive materiel will not identify the nature of the materiel. Passive RFID tagging is required in all contracts that contain DFARS clause 252.211-7006. Contractors shall check the solicitation and/or contract for this clause. For details and most recent information, see http://www.acq.osd.mil/log/sci/ait.html for the current DoD Suppliers’ Passive RFID Information Guide and Supplier Implementation Plan. If the item has Unique Item Identifier (UII) markings then the UII needs to be 2D bar coded and applied on the unit package, intermediate and exterior containers, and the unit load.

8 Hazardous Materials (as applicable): Hazardous Materials is defined as a substance, or waste which has been determined by the Secretary of Transportation to be capable of posing an unreasonable risk to health, safety, and property when transported in commerce and which has been so designated. (This includes all items listed as hazardous in Titles 29, 40 and 49 CFR and other applicable modal regulations effective at the time of shipment.)

http://www.acq.osd.mil/log/sci/ait.html

When applicable, the packaging and marking for hazardous material shall comply with the requirements for the mode of transport and the applicable performance packaging contained in the following documents:

International Air Transport Association (IATA)• Dangerous Goods Regulations International Maritime Dangerous Goods Code (IMDG)• Code of Federal Regulations (CFR) Title 29, Title 40• and Title 49 Joint Service Regulation• AFJMAN24-204/TM38-250/NAVSUPPUB 505/MCO P4030.19/DLAM

4145.3 (for military air shipments).

If the shipment originates from outside the continental United States, the shipment shall be prepared in accordance with the United Nations Recommendations on the Transport of Dangerous Goods in a manner acceptable to the Competent Authority of the nation of origin and in accordance with regulations of all applicable carriers.

A Product Safety Data Sheet (SDS) is required to be included with every unit pack and intermediate container and shall be included with the packing list inside the sealed pouch attached to the outside of the package.

9 Heat Treatment and Marking of Wood Packaging Materials. All non-manufactured wood used in packaging shall be heat treated to a core temperature of 56 degrees Celsius for a minimum of 30 minutes. The box/pallet manufacturer and the manufacturer of wood used as inner packaging shall be affiliated with an inspection agency accredited by the board of review of the American Lumber Standard Committee. The box/pallet manufacturer and the manufacturer of wood used as inner packaging shall ensure tractability to the original source of heat treatment. Each box/pallet shall be marked to show the conformance to the International Plant Protection Convention Standard. Boxes/pallets and any wood used as inner packaging made of non-manufactured wood shall be heat-treated. The quality mark shall be placed on both ends of the outer packaging, between the end cleats or end battens; on two sides of the pallet. Foreign manufacturers shall have the heat treatment of non-manufactured wood products verified in accordance with their National Plant Protection Organization’s compliance program.

In addition, wood used as dunnage for blocking and bracing, to include ISO containers, shall be ordered with ALSC certified marking for dunnage or the markings may be applied locally at two foot intervals.

10 Quality Assurance. The contractor is responsible for establishing a quality system. Full consideration to examinations, inspections, and tests will be given to ensure the acceptability of the commercial package. All items, packing configurations, and markings supplied under this contract shall be identical to the first article.

11 Supplemental Instructions.

Items within storage pockets or foam cutouts do not require packaging if placed in a dedicated position within the chest, where there is no potential for corrosion or physical damage and can be identified by a layout plan.

Items that do not have a dedicated position within the tool chest shall remain in their commercial packaging or be placed into its own unit package and then stored in the tool chest. Items susceptible to corrosion shall be protected with the use of Volatile Corrosion Inhibitors (VCI) or Desiccant packs. Where VCI is used, natural or synthetic rubber and optical systems shall be placed in a sealed bag to prevent exposure to vapors. Desiccant and VCI shall not be present in the same pack.

The fully loaded tool chest shall be packaged in its own fiberboard box built in accordance with ASTM D5168 or ASTM D5118/D5118M. The fiberboard box shall be able to handle the weights and dimensions of its contents. This will serve as the unit pack and shipping container.

Manuals, parts lists, and warranty information shall be packed in sealed water proof packaging that is reusable, i.e. zip lock bag. Packing Lists shall be sealed in water-resistant envelopes and secured to the exterior of the load or crate in the most protected location.