Carpenter Tool Kit drawing bundle (Attachment 0002).pdf

C

A

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES �#� �$�

2 PLACE DECIMALS �#�

3 PLACE DECIMALS �#�

FORMAT: C_TACOM_ENG_1_0

DRAWING SIZE C

DWG NO.

DISTRIBUTION STATEMENT A.

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED.

-1 OR -2

FILE CARD AND BRUSH, 10"-20719K10015967812

FILE, HAND, MILL, FLAT, SINGLE CUT, BASTARD CUT-1 OR -20719D30015967813

FILE, HAND, HALF ROUND, DOUBLE CUT, BASTARD CUT-1 OR -2 0719D10005967814

RASP, CABINET, HALF ROUND, SECOND CUT-1 OR -20719J00005967815

FILE, HAND, ROUND, BASTARD CUT-1 OR -20719D40005967816

FILE, HAND, THREE SQUARE, DOUBLE CUT, SECOND CUT-1 OR -30719C60005967817

FILE, HAND, TAPER SAW, SINGLE CUT, REGULAR CUT-1 OR -20719B30005967818

8 7 4 3 6 5

1 OF 11/2

0414D100159678C

FILE SET, 8 PC

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

ROCK ISLAND, ILLINOIS 61299-5000

V. VONDERA

J. MILLER

K. ROESERJ. MILLER

2018-06-29K. ROESER

K. ROESER

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

CTK0414D0000

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2018-10-04PRODUCT BASELINE - ERR K18O3006-

PART NO. 0414D1001

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

NSN NATIONAL STOCK NUMBER IF APPLICABLE

NOMENCLATURE

OR DESCRIPTION

PART NO. OR IDENTIFYING NO.

CAGE

CODE

QTY.

REQ.

ITEM OR

FIND NO.

HANDLE, FILE, ADJUSTABLE0719K00005967811

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. ITEMS 3,4,5,6,7 & 8 ARE A MATCHED SET

AND SHALL BE OF THE SAME BRAND. THEREFORE,

ITEMS 3,4,5,6,7 & 8 SHALL CONSIST ENTIRELY OF THE

SAME MANUFACTURER AND SAME BRAND.

QUALITY ASSURANCE PROVISION (QAP)

<DARCOM-R-702-10)

PART V -TEST METHODS AND PROCEDURES

(As referenced under Inspection Method Colum Part III)

STM-1. Packing Instructions inspection shall be performed as follows:

(a) Visually examine each item stored in the tool chest and verify that all items in the CTK Components List (0414D0000) are loaded within the tool chest.

STM-2. Tool Layout inspection shall be performed as follows:

(a) Open all drawers and visually examine the layout and verify that to the maximum extent possible, like items are grouped together within the organizing liners.

(b) Visually compare the negotiated layout drawings to the layout provided. Verify the layouts are identical.

STM-3. Foam Organizing Liner inspection shall be performed as follows:

(a) Visually verify that the foam organizing liner completely fills each tool holding area within each drawer or tray from side to side and front to back.

(b) Verify that all items are stored in specific contoured cutouts in the foam organizers. Verify that each contoured retention feature securely bolds the tool in place.

(c) Visually verify that each contoured cutout allows easy removal of the tool through use of pick holes and cut out or recessed areas. Verify that each retention feature is smooth and free from rough edges.

(d) Measur e the distance from the plane defined by the top of the tool organizer to the highest point on each tool.

Verify that each tool is held no more than .25 inches above or below the plane defined by the top of the tool organizer.

(e) Visually examine a sample of the foam sized no smaller than 4 by 6 inches. Confirm that the construction is similar to the construction of the drawers. Examine any horizontal seams present in the sample. Attempt to separate the foam at the seams. Confirm that the foam itself tears before seams separate.

DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. CAGE CODE

REVISION

SYMBOL

ANDDATI!

I� 01 :J..3

59678

It. QAPNO.

f-------+---------1-------+-----�---� 0414EOOOO

II. PAGl:NO.

f--------+------+-------+-------+-------<

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES �#� �$�

2 PLACE DECIMALS �#�

3 PLACE DECIMALS �#�

DWG NO.DISTRIBUTION STATEMENT A. APPROVED

FOR PUBLIC RELEASE; DISTRIBUTION IS

UNLIMITED.

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. ONLY ITEMS DESCRIBED ON THIS DRAWING

ARE APPROVED FOR USE IN THE APPLICATIONS

SPECIFIED HEREON. A SUBSTITUTE ITEM SHALL

NOT BE USED WITHOUT PRIOR APPROVAL BY

THE QUALIFYING ACTIVITY.

3. IDENTIFICATION OF THE APPROVED SOURCE(S)

OF SUPPLY HEREON IS NOT TO BE CONSTRUED

AS A GUARANTEE OF PRESENT OR CONTINUED

AVAILABILITY AS A SOURCE OF SUPPLY FOR

THE ITEM DESCRIBED ON THE DRAWING.

SOURCE CONTROL DRAWING

TYPE 12-PT SOCKET

0703C0001-4

WILLIAMS J H INDUSTRIAL

PRODUCTS INC

6969 JAMESSON RD

COLUMBUS, GA 31908

8Z799 B-1208

3/8" DR SOCKET,

12-POINT, 1/4"

(L) ( )3/8(1/4)

1 OF 13/1

0703C000059678C

SOCKET, 3/8" DRIVE,

1/4", 12-PT

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

ROCK ISLAND, ILLINOIS 61299-5000

V. VONDERA

J. MILLER

K. ROESERJ. MILLER

2018-06-26K. ROESER

M. ANDRINGA

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

MULTIPLEMULTIPLE

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2018-10-04 PRODUCT BASELINE - ERR K18O3006-

SPECIFICATIONS

LENGTH (L) 1.26 INCH MAX

DRIVE SIZE 3/8 INCH

SOCKET SIZE 1/4 INCH

FINISH FULL POLISH CHROME

SPECIAL FEATURES

STANDARD LENGTH, DOUBLE HEXAGON

(12-POINT)

APPLICABLE

SPECIFICATIONS/STANDARDS

ASME B107.110, CATEGORY 1, TYPE I

APPROVED SOURCE(S)

PART NO.

VENDOR DATA

NAME & ADDRESS

CAGE

CODE

VENDOR

PART NO.

VENDOR DESCRIPTION

0703C0000-1

SK HAND TOOL, LLC

1600 SOUTH PRAIRIE DRIVE

SYCAMORE, IL 60178

6RYA2 45208

3/8" DRIVE 12 POINT

STANDARD FRACTIONAL

SOCKET 1/4"

0703C0000-2

SNAP-ON INDUSTRIAL

2801 80TH ST

KENOSHA, WI 53143

55719 F081

SOCKET, SHALLOW, 1/4",

12-POINT

0703C0001-3

STANLEY PROTO INDUSTRIAL

2195 E VIEW PKWY STE 103

CONYERS, GA 30013

1CV05 J5208

3/8" DRIVE SOCKET 1/4" -

12 POINT

PART NO. SEE TABLE

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

ISO VIEW

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES

2 PLACE DECIMALS

3 PLACE DECIMALS

DWG NO.DISTRIBUTION STATEMENT A. APPROVED

FOR PUBLIC RELEASE; DISTRIBUTION IS

UNLIMITED.

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. ONLY ITEMS DESCRIBED ON THIS DRAWING

ARE APPROVED FOR USE IN THE APPLICATIONS

SPECIFIED HEREON. A SUBSTITUTE ITEM SHALL

NOT BE USED WITHOUT PRIOR APPROVAL BY

THE QUALIFYING ACTIVITY.

3. IDENTIFICATION OF THE APPROVED SOURCE(S)

OF SUPPLY HEREON IS NOT TO BE CONSTRUED

AS A GUARANTEE OF PRESENT OR CONTINUED

AVAILABILITY AS A SOURCE OF SUPPLY FOR

THE ITEM DESCRIBED ON THE DRAWING.

SOURCE CONTROL DRAWING

VEV2017-06-02ERR K17O3003A

TYPE 12-PT SOCKET

0703C0001-5

STANLEY BLACK & DECKER, INC.

DBA MAC TOOLS

505 N CLEVELAND AVE STE 200

WESTERVILLE, OH 43082-7130

76377 X102R SOCKET, 3/8" DRIVE,

5/16", 12-PT

0703C0001-6

WILLIAMS J H INDUSTRIAL

PRODUCTS INC

6969 JAMESSON RD

COLUMBUS, GA 31908

8Z799 B-1210 3/8" DR SOCKET,

12-POINT, 5/16" (L)

(3/8) (5/16)

1 OF 10.0003/1

0703C000159678C

SOCKET, 3/8" DRIVE,

5/16", 12-PT

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2015-10-26V. VONDERA

2015-10-26J. MILLER

J. MILLERB. VERMULM

2015-05-12J. MILLER

M. ANDRINGA

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

MULTIPLEMULTIPLE

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2015-10-26 PRODUCT BASELINE - ERR K15O3007-

SPECIFICATIONS

LENGTH (L) 1.26 INCH MAX

DRIVE SIZE 3/8 INCH

SOCKET SIZE 5/16 INCH

FINISH FULL POLISH CHROME

SPECIAL FEATURES STANDARD LENGTH, DOUBLE HEXAGON

(12-POINT)

APPLICABLE

SPECIFICATIONS/STANDARDS

ASME B107.110, CATEGORY 1, TYPE

I

APPROVED SOURCE(S)

PART NO.

VENDOR DATA

NAME & ADDRESS CAGE

CODE

VENDOR

PART NO. VENDOR DESCRIPTION

0703C0001-1 -REMOVED

0703C0001-2

SK HAND TOOL, LLC

1600 SOUTH PRAIRIE DRIVE

SYCAMORE, IL 60178

6RYA2 45210

3/8" DRIVE 12 POINT

STANDARD FRACTIONAL

SOCKET 5/16"

0703C0001-3

SNAP-ON INDUSTRIAL

2801 80TH ST

KENOSHA, WI 53143

55719 F101 SOCKET, SHALLOW, 5/16",

12-POINT

0703C0001-4

STANLEY PROTO INDUSTRIAL

2195 E VIEW PKWY STE 103

CONYERS, GA 30013

1CV05 J5210 3/8" DRIVE SOCKET 5/16"

- 12 POINT

PART NO. SEE TABLE

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES

DWG NO.DISTRIBUTION STATEMENT A. APPROVED

FOR PUBLIC RELEASE; DISTRIBUTION IS

UNLIMITED.

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. ONLY ITEMS DESCRIBED ON THIS DRAWING

ARE APPROVED FOR USE IN THE APPLICATIONS

SPECIFIED HEREON. A SUBSTITUTE ITEM SHALL

NOT BE USED WITHOUT PRIOR APPROVAL BY

THE QUALIFYING ACTIVITY.

3. IDENTIFICATION OF THE APPROVED SOURCE(S)

OF SUPPLY HEREON IS NOT TO BE CONSTRUED

AS A GUARANTEE OF PRESENT OR CONTINUED

AVAILABILITY AS A SOURCE OF SUPPLY FOR

THE ITEM DESCRIBED ON THE DRAWING.

SOURCE CONTROL DRAWING

VEV2017-06-02ERR K17O3003ATYPE 12-PT SOCKET

0703C0003-5

STANLEY BLACK & DECKER, INC.

DBA MAC TOOLS

505 N CLEVELAND AVE STE 200

WESTERVILLE, OH 43082-7130

76377 X122R SOCKET, 3/8" DRIVE,

3/8", 12-PT

0703C0003-6

WILLIAMS J H INDUSTRIAL

PRODUCTS INC

6969 JAMESSON RD

COLUMBUS, GA 31908

8Z799 B-1212 3/8" DR SOCKET,

12-POINT, 3/8"

(L) (3/8)(3/8)

1 OF 10.0003/1

0703C000359678C

SOCKET, 3/8" DRIVE,

3/8", 12-PT

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2015-10-26V. VONDERA

2015-10-26J. MILLER

J. MILLERB. VERMULM

2015-05-12J. MILLER

M. ANDRINGA

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

MULTIPLEMULTIPLE

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2015-10-26 PRODUCT BASELINE - ERR K15O3007-

SPECIFICATIONS

LENGTH (L) 1.26 INCH MAX

DRIVE SIZE 3/8 INCH

SOCKET SIZE 3/8 INCH

FINISH FULL POLISH CHROME

SPECIAL FEATURES STANDARD LENGTH, DOUBLE HEXAGON

(12-POINT)

APPLICABLE

SPECIFICATIONS/STANDARDS

ASME B107.110, CATEGORY 1,

TYPE I

APPROVED SOURCE(S)

PART NO.

VENDOR DATA

NAME & ADDRESS CAGE

CODE

VENDOR

PART NO. VENDOR DESCRIPTION

0703C0003-1 -REMOVED

0703C0003-2

SK HAND TOOL, LLC

1600 SOUTH PRAIRIE DRIVE

SYCAMORE, IL 60178

6RYA2 45212

3/8" DRIVE 12 POINT

STANDARD FRACTIONAL

SOCKET 3/8"

0703C0003-3

SNAP-ON INDUSTRIAL

2801 80TH ST

KENOSHA, WI 53143

55719 F121 SOCKET, SHALLOW, 3/8",

12-POINT

0703C0003-4

STANLEY PROTO INDUSTRIAL

2195 E VIEW PKWY STE 103

CONYERS, GA 30013

1CV05 J5212 3/8" DRIVE SOCKET 3/8" -

12 POINT

PART NO. SEE TABLE

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES

DWG NO.DISTRIBUTION STATEMENT A. APPROVED

FOR PUBLIC RELEASE; DISTRIBUTION IS

UNLIMITED.

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. ONLY ITEMS DESCRIBED ON THIS DRAWING

ARE APPROVED FOR USE IN THE APPLICATIONS

SPECIFIED HEREON. A SUBSTITUTE ITEM SHALL

NOT BE USED WITHOUT PRIOR APPROVAL BY

THE QUALIFYING ACTIVITY.

3. IDENTIFICATION OF THE APPROVED SOURCE(S)

OF SUPPLY HEREON IS NOT TO BE CONSTRUED

AS A GUARANTEE OF PRESENT OR CONTINUED

AVAILABILITY AS A SOURCE OF SUPPLY FOR

THE ITEM DESCRIBED ON THE DRAWING.

SOURCE CONTROL DRAWING

VEV2017-06-02ERR K17O3003A

TYPE 12-PT SOCKET

0703C0004-5

STANLEY BLACK & DECKER, INC.

DBA MAC TOOLS

505 N CLEVELAND AVE STE 200

WESTERVILLE, OH 43082-7130

76377 X142R SOCKET, 3/8" DRIVE,

7/16", 12-PT

0703C0004-6

WILLIAMS J H INDUSTRIAL

PRODUCTS INC

6969 JAMESSON RD

COLUMBUS, GA 31908

8Z799 B-1214 3/8" DR SOCKET,

12-POINT, 7/16"

(L) (3/8)(7/16)

1 OF 10.0003/1

0703C000459678C

SOCKET, 3/8" DRIVE,

7/16", 12-PT

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2015-10-26V. VONDERA

2015-10-26J. MILLER

J. MILLERB. VERMULM

2015-05-13J. MILLER

M. ANDRINGA

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

MULTIPLEMULTIPLE

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2015-10-26 PRODUCT BASELINE - ERR K15O3007-

SPECIFICATIONS

LENGTH (L) 1.26 INCH MAX

DRIVE SIZE 3/8 INCH

SOCKET SIZE 7/16 INCH

FINISH FULL POLISH CHROME

SPECIAL FEATURES STANDARD LENGTH, DOUBLE HEXAGON

(12-POINT)

APPLICABLE

SPECIFICATIONS/STANDARDS

ASME B107.110, CATEGORY 1, TYPE

I

APPROVED SOURCE(S)

PART NO.

VENDOR DATA

NAME & ADDRESS CAGE

CODE

VENDOR

PART NO. VENDOR DESCRIPTION

0703C0004-1 -REMOVED

0703C0004-2

SK HAND TOOL, LLC

1600 SOUTH PRAIRIE DRIVE

SYCAMORE, IL 60178

6RYA2 45214

3/8" DRIVE 12 POINT

STANDARD FRACTIONAL

SOCKET 7/16"

0703C0004-3

SNAP-ON INDUSTRIAL

2801 80TH ST

KENOSHA, WI 53143

55719 F141 SOCKET, SHALLOW, 7/16" -

12 POINT

0703C0004-4

STANLEY PROTO INDUSTRIAL

2195 E VIEW PKWY STE 103

CONYERS, GA 30013

1CV05 J5214 3/8" DRIVE SOCKET 7/16"

- 12 POINT

PART NO. SEE TABLE

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES

DWG NO.DISTRIBUTION STATEMENT A. APPROVED

FOR PUBLIC RELEASE; DISTRIBUTION IS

UNLIMITED.

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. ONLY ITEMS DESCRIBED ON THIS DRAWING

ARE APPROVED FOR USE IN THE APPLICATIONS

SPECIFIED HEREON. A SUBSTITUTE ITEM SHALL

NOT BE USED WITHOUT PRIOR APPROVAL BY

THE QUALIFYING ACTIVITY.

3. IDENTIFICATION OF THE APPROVED SOURCE(S)

OF SUPPLY HEREON IS NOT TO BE CONSTRUED

AS A GUARANTEE OF PRESENT OR CONTINUED

AVAILABILITY AS A SOURCE OF SUPPLY FOR

THE ITEM DESCRIBED ON THE DRAWING.

SOURCE CONTROL DRAWING

(L) (3/8)

1 OF 10.0001/1

0711B100059678C

EXTENSION, 3/8"

DRIVE, 3"

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2015-10-26V. VONDERA

2015-10-26J. MILLER

J. MILLERB. VERMULM

2015-05-05J. MILLER

M. ANDRINGA

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

MULTIPLEMULTIPLE

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2015-10-26 PRODUCT BASELINE - ERR K15O3007-

VEV2017-06-02ERR K17O3003A

SPECIFICATIONS

TYPE DRIVE EXTENSION

LENGTH (L) 3 INCHES NOMINAL

DRIVE SIZE 3/8 INCH

FINISH FULL POLISH CHROME

SPECIAL FEATURES KNURLED GRIP

APPLICABLE

SPECIFICATIONS/STANDARDS

ASME B107.110, CATEGORY

10, TYPE II, CLASS 2,

STYLE A

APPROVED SOURCE(S)

PART NO.

VENDOR DATA

NAME & ADDRESS CAGE

CODE

VENDOR

PART NO. VENDOR DESCRIPTION

0711B1000-1 -REMOVED

0711B1000-2

SNAP-ON INDUSTRIAL

2801 80TH ST

KENOSHA, WI 53143

55719 FXK3 EXTENSION, KNURLED,

FRICTION BALL, 3"

0711B1000-3

STANLEY PROTO INDUSTRIAL

2195 E VIEW PKWY STE 103

CONYERS, GA 30013

1CV05 J5260 3/8" DRIVE EXTENSION 3"

0711B1000-4

SK HAND TOOL, LLC

1600 SOUTH PRAIRIE DRIVE

SYCAMORE, IL 60178

6RYA2 45160 EXTENSION, 3/8" DRIVE, 3"

0711B1000-5

STANLEY BLACK & DECKER, INC.

DBA MAC TOOLS

505 N CLEVELAND AVE STE 200

WESTERVILLE, OH 43082-7130

76377 X3EK EXTENSION, 3/8" DRIVE, 3"

PART NO. SEE TABLE

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES

DWG NO.DISTRIBUTION STATEMENT A. APPROVED

FOR PUBLIC RELEASE; DISTRIBUTION IS

UNLIMITED.

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. ONLY ITEMS DESCRIBED ON THIS DRAWING

ARE APPROVED FOR USE IN THE APPLICATIONS

SPECIFIED HEREON. A SUBSTITUTE ITEM SHALL

NOT BE USED WITHOUT PRIOR APPROVAL BY

THE QUALIFYING ACTIVITY.

3. IDENTIFICATION OF THE APPROVED SOURCE(S)

OF SUPPLY HEREON IS NOT TO BE CONSTRUED

AS A GUARANTEE OF PRESENT OR CONTINUED

AVAILABILITY AS A SOURCE OF SUPPLY FOR

THE ITEM DESCRIBED ON THE DRAWING.

SOURCE CONTROL DRAWING

VEV2017-10-20ERR K17O3009 A

0718E0000-4

SNAP-ON INDUSTRIAL

2801 80TH ST

KENOSHA, WI 53143

55719 59AHLP PLIERS, LINEMAN'S, 9 1/4"

0718E0000-5

STANLEY PROTO INDUSTRIAL

2195 E VIEW PKWY STE 103

CONYERS, GA 30013

1CV05 J268G LINEMAN'S PLIERS W/ GRIP -

8-5/8"

0718E0000-6

S K HAND TOOL LLC

1600 SOUTH PRAIRIE DRIVE

SYCAMORE, IL 60178

6RYA2 18019 9" LINESMAN WITH CRIMPING DIE

AND FISHTAPE PULLER (L)

1 OF 11/2

0718E000059678C

PLIERS, LINEMAN'S, 8"

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2016-06-08V. VONDERA

2016-06-08B. VERMULM

J. MILLERT. PHILLIS

2015-10-05J. MILLER

M. ANDRINGA

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

MULTIPLEMULTIPLE

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2016-06-08 PRODUCT BASELINE - ERR K16O3009-

SPECIFICATIONS

TYPE LINEMAN'S PLIERS

SIZE 8 INCH NOMINAL

MATERIAL STEEL

APPLICABLE

SPECIFICATIONS/STANDARDS

ASME B107.500 (B107.20)

TYPE I, CLASS 1

EXCEPTIONS TO THE

SPECIFICATIONS/STANDARDS

LENGTH (L) OF 8.00 TO

9.25 INCHES

APPROVED SOURCE(S)

PART NO.

VENDOR DATA

NAME & ADDRESS CAGE

CODE

VENDOR

PART NO. VENDOR DESCRIPTION

0718E0000-1

AMERICAN KAL ENTERPRISES, INC.

DBA PRO AMERICA PREMIUM TOOLS

4265 PUENTE AVE

BALDWIN PARK, CA 91706-3420

60043 5028 8" LINEMAN'S

0718E0000-2 -REMOVED

0718E0000-3

CHANNELLOCK INC

1306 S MN ST

MEADVILLE, PA 16335-3035

71612 E348 8.5" BEVEL NOSE LINEMAN'S PLIER

PART NO. SEE TABLE

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

COMFORT GRIPS

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES

DWG NO.DISTRIBUTION STATEMENT A. APPROVED

FOR PUBLIC RELEASE; DISTRIBUTION IS

UNLIMITED.

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. ONLY ITEMS DESCRIBED ON THIS DRAWING

ARE APPROVED FOR USE IN THE APPLICATIONS

SPECIFIED HEREON. A SUBSTITUTE ITEM SHALL

NOT BE USED WITHOUT PRIOR APPROVAL BY

THE QUALIFYING ACTIVITY.

3. IDENTIFICATION OF THE APPROVED SOURCE(S)

OF SUPPLY HEREON IS NOT TO BE CONSTRUED

AS A GUARANTEE OF PRESENT OR CONTINUED

AVAILABILITY AS A SOURCE OF SUPPLY FOR

THE ITEM DESCRIBED ON THE DRAWING.

SOURCE CONTROL DRAWING

VEV2017-06-02ERR K17O3003A

TYPE LOCKING PLIERS, LONG NOSE

0718F0000-3

APEX TOOL GROUP, LLC

14600 YORK RD. STE A

SPARKS, MD 21152-9396

636D0 C6NV 6" LONG NOSE LOCKING

PLIER WITH WIRE CUTTER

0718F0000-4

STANLEY BLACK & DECKER, INC.

DBA MAC TOOLS

505 N CLEVELAND AVE STE 200

WESTERVILLE, OH 43082-7130

76377 MLP6LN PLIERS, LOCKING, LONG

NOSE, 6.5 INCH

1 OF 10.0001/1

0718F000059678C

PLIERS, LOCKING,

LONG NOSE, 6.5 INCH

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2015-10-26V. VONDERA

2015-10-26J. MILLER

N. FOXENB. VERMULM

2015-07-20N. FOXEN

N. FOXEN

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

MULTIPLEMULTIPLE

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2015-10-26 PRODUCT BASELINE - ERR K15O3007-

SPECIFICATIONS

SIZE 6.5 INCHES NOMINAL

JAW CAPACITY 2 INCHES MIN

SPECIAL FEATURES

LONG NOSE; WIRE CUTTER; TURN-SCREW

JAW OPENING ADJUSTMENT; SERRATED

GRIPPING SURFACES; AND LEVER STYLE

LOCK RELEASE

APPLICABLE

SPECIFICATIONS/STANDARDS

ASME B107.500 (B107.24), TYPE I,

CLASS 3, STYLE B

APPROVED SOURCE(S)

PART NO.

VENDOR DATA

NAME & ADDRESS CAGE

CODE

VENDOR

PART NO. VENDOR DESCRIPTION

0718F0000-1

IRWIN INDUSTRIAL TOOL COMPANY

92 GRANT ST

WILMINGTON, OH 45177-2324

1JU00 1402L3

THE ORIGINAL LONG NOSE

LOCKING PLIERS WITH WIRE

CUTTER, 6.5"

0718F0000-2

SNAP-ON INDUSTRIAL

2801 80TH ST

KENOSHA, WI 53143

55719 BLP6LN

PLIERS, LOCKING,

STANDARD GRIP, LONG

NOSE, 6"

PART NO. SEE TABLE

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES

DWG NO.DISTRIBUTION STATEMENT A. APPROVED

FOR PUBLIC RELEASE; DISTRIBUTION IS

UNLIMITED.

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. ONLY ITEMS DESCRIBED ON THIS DRAWING

ARE APPROVED FOR USE IN THE APPLICATIONS

SPECIFIED HEREON. A SUBSTITUTE ITEM SHALL

NOT BE USED WITHOUT PRIOR APPROVAL BY

THE QUALIFYING ACTIVITY.

3. IDENTIFICATION OF THE APPROVED SOURCE(S)

OF SUPPLY HEREON IS NOT TO BE CONSTRUED

AS A GUARANTEE OF PRESENT OR CONTINUED

AVAILABILITY AS A SOURCE OF SUPPLY FOR

THE ITEM DESCRIBED ON THE DRAWING.

SOURCE CONTROL DRAWING

VEV2017-06-02ERR K17O3003A

TYPE LOCKING PLIERS, CURVED JAW

0718F0001-3

APEX TOOL GROUP, LLC

14600 YORK RD. STE A

SPARKS, MD 21152-9396

636D0 C10CV 10" CURVED JAW LOCKING

PLIER WITH WIRE CUTTER

0718F0001-4

STANLEY BLACK & DECKER, INC.

DBA MAC TOOLS

505 N CLEVELAND AVE STE 200

WESTERVILLE, OH 43082-7130

76377 MLP10CJ PLIERS, LOCKING, CURVED

JAW, 10 INCH

1 OF 10.0005/8

0718F000159678C

PLIERS, LOCKING,

CURVED JAW, 10 INCH

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2015-10-26V. VONDERA

2015-10-26J. MILLER

N. FOXENB. VERMULM

2015-07-17N. FOXEN

M. ANDRINGA

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

MULTIPLEMULTIPLE

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2015-10-26 PRODUCT BASELINE - ERR K15O3007-

SPECIFICATIONS

SIZE 10 INCHES NOMINAL

JAW CAPACITY 1-7/8 INCHES MIN

SPECIAL FEATURES

CURVED JAW; WIRE CUTTER; TURN-SCREW JAW

OPENING ADJUSTMENT; SERRATED GRIPPING

SURFACES; AND LEVER STYLE LOCK RELEASE

APPLICABLE

SPECIFICATIONS/STANDARDS

ASME B107.500 (B107.24), TYPE I,

CLASS 2, STYLE B

APPROVED SOURCE(S)

PART NO.

VENDOR DATA

NAME & ADDRESS CAGE

CODE

VENDOR

PART NO. VENDOR DESCRIPTION

0718F0001-1

IRWIN INDUSTRIAL TOOL COMPANY

92 GRANT ST

WILMINGTON, OH 45177-2324

1JU00 502L3

THE ORIGINAL CURVED JAW

LOCKING PLIERS WITH WIRE

CUTTER, 10"

0718F0001-2

SNAP-ON INDUSTRIAL

2801 80TH ST

KENOSHA, WI 53143

55719 BLP10

PLIERS, LOCKING,

STANDARD GRIP, CURVED

JAW, 10"

PART NO. SEE TABLE

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES

DWG NO.DISTRIBUTION STATEMENT A. APPROVED

FOR PUBLIC RELEASE; DISTRIBUTION IS

UNLIMITED.

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. ONLY ITEMS DESCRIBED ON THIS DRAWING

ARE APPROVED FOR USE IN THE APPLICATIONS

SPECIFIED HEREON. A SUBSTITUTE ITEM SHALL

NOT BE USED WITHOUT PRIOR APPROVAL BY

THE QUALIFYING ACTIVITY.

3. IDENTIFICATION OF THE APPROVED SOURCE(S)

OF SUPPLY HEREON IS NOT TO BE CONSTRUED

AS A GUARANTEE OF PRESENT OR CONTINUED

AVAILABILITY AS A SOURCE OF SUPPLY FOR

THE ITEM DESCRIBED ON THE DRAWING.

SOURCE CONTROL DRAWING

VEV2017-06-02ERR K17O3003A

TYPE HAND FILE

APPLICABLE

SPECIFICATIONS/STANDARDS CID A-A-2322, TYPE II

0719C6000-1

ICS CUTTING TOOLS, INC.

511 MAIN ST

CASCO, WI 54205-9414

1YS26 F-TSQ-08SC

8" MACHINISTS TRIANGLE

FILE, AMERICAN PATTERN -

BLACK TANG, SECOND CUT

0719C6000-3

BAHCO NORTH AMERICA INC

19 KEYSTONE INDUSTRIAL PK

SCRANTON, PA 18501-2036

3PYD4 11700820 8" THREE SQUARE FILE

(L)

1 OF 10.0003/4

0719C600059678C

FILE, HAND, THREE

SQUARE, DOUBLE CUT,

SECOND CUT

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2015-10-26V. VONDERA

2015-10-26J. MILLER

N. FOXENB. VERMULM

2015-07-27N. FOXEN

N. FOXEN

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

MULTIPLEMULTIPLE

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2015-10-26 PRODUCT BASELINE - ERR K15O3007-

PART NO. SEE TABLE

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

SPECIFICATIONS

LENGTH (L) 8 INCHES NOMINAL

PATTERN TYPE AMERICAN

FACE CUT TYPE DOUBLE CUT, SECOND CUT

STYLE DESIGNATOR THREE SQUARE

APPROVED SOURCE(S)

PART NO.

VENDOR DATA

NAME & ADDRESS CAGE

CODE

VENDOR PART

NO. VENDOR DESCRIPTION

0719C6000-2

WARRENSVILLE FILE & KNIFE INC

5555 OAKBROOK PKWY, STE 410

NORCROSS, GA 30093-2936

0M9X2 18058 8" THREE SQUARE FILE

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES

DWG NO.DISTRIBUTION STATEMENT A. APPROVED

FOR PUBLIC RELEASE; DISTRIBUTION IS

UNLIMITED.

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. ONLY ITEMS DESCRIBED ON THIS DRAWING

ARE APPROVED FOR USE IN THE APPLICATIONS

SPECIFIED HEREON. A SUBSTITUTE ITEM SHALL

NOT BE USED WITHOUT PRIOR APPROVAL BY

THE QUALIFYING ACTIVITY.

3. IDENTIFICATION OF THE APPROVED SOURCE(S)

OF SUPPLY HEREON IS NOT TO BE CONSTRUED

AS A GUARANTEE OF PRESENT OR CONTINUED

AVAILABILITY AS A SOURCE OF SUPPLY FOR

THE ITEM DESCRIBED ON THE DRAWING.

SOURCE CONTROL DRAWING

TYPE FILE HANDLE

(L)

(D)

1 OF 10.0003/2

0719K000059678C

HANDLE, FILE, ADJUSTABLE

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2015-10-26V. VONDERA

2015-10-26J. MILLER

N. FOXENB. VERMULM

2015-07-23N. FOXEN

N. FOXEN

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

MULTIPLEMULTIPLE

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2015-10-26 PRODUCT BASELINE - ERR K15O3007-

SPECIFICATIONS

LENGTH (L) 4-1/8 INCHES NOMINAL

MINIMUM HANDLE DIAMETER (D) 1 INCH

SPECIAL FEATURES

ADJUSTABLE CLAMPING JAWS;

3/8 INCH MAXIMUM

OPENING; SECURELY HOLDS

FILE DURING USE

APPROVED SOURCE(S)

PART NO.

VENDOR DATA

NAME & ADDRESS CAGE

CODE

VENDOR

PART NO. VENDOR DESCRIPTION

0719K0000-1

GENERAL TOOLS MFG CO LLC

80 WHITE ST

NEW YORK, NY 10013

3JKA4 890 ADJUSTABLE FILE/TOOL

HANDLE

0719K0000-2

SNAP-ON INDUSTRIAL

2801 80TH ST

KENOSHA, WI 53143

55719 GA98A HANDLE, FILE

PART NO. SEE TABLE

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES

DWG NO.DISTRIBUTION STATEMENT A. APPROVED

FOR PUBLIC RELEASE; DISTRIBUTION IS

UNLIMITED.

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. ONLY ITEMS DESCRIBED ON THIS DRAWING

ARE APPROVED FOR USE IN THE APPLICATIONS

SPECIFIED HEREON. A SUBSTITUTE ITEM SHALL

NOT BE USED WITHOUT PRIOR APPROVAL BY

THE QUALIFYING ACTIVITY.

3. IDENTIFICATION OF THE APPROVED SOURCE(S)

OF SUPPLY HEREON IS NOT TO BE CONSTRUED

AS A GUARANTEE OF PRESENT OR CONTINUED

AVAILABILITY AS A SOURCE OF SUPPLY FOR

THE ITEM DESCRIBED ON THE DRAWING.

SOURCE CONTROL DRAWING

VEV2017-10-20ERR K17O3009A

TYPE FILE CARD AND BRUSH

HANDLE MATERIAL STRAIGHT CLOSE GRAINED BEACH,

BIRCH, OR MAPLE WOOD

(L)

(CH)

(BH)

(BL)

(BW)

(CW)

(CL)

1 OF 11/2

0719K100159678C

FILE CARD AND BRUSH,

10"

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2016-06-08V. VONDERA

2016-06-08B. VERMULM

J. MILLERT. PHILLIS

2015-09-03J. MILLER

J. MILLER

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

MULTIPLEMULTIPLE

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2016-06-08 PRODUCT BASELINE - ERR K16O3009-

SPECIFICATIONS

LENGTH (L) 10 INCHES NOMINAL

FILE CARD DIMENSIONS

(CL X CW X CH) 4.75 X 1.50 X .25 INCHES NOMINAL

BRUSH DIMENSIONS

(BL X BW X BH)

4.50 X 1.50 X .625 INCHES

NOMINAL

HANDLE MATERIAL STRAIGHT CLOSE GRAINED BEACH,

BIRCH, OR MAPLE WOOD

SPECIAL FEATURES

FINE .25 INCH TRIM STEEL WIRE

FILE CARD; STIFF BRISTLE FIBER

BRUSH

APPROVED SOURCE(S)

PART NO.

VENDOR DATA

NAME & ADDRESS CAGE

CODE

VENDOR

PART NO. VENDOR DESCRIPTION

0719K1001-1 -REMOVED

0719K1001-2

TRIM BRUSH

22 LITTELL RD BLDG 1

EAST HANOVER, NJ 07936-1002

3NGU1 1G INDUSTRIAL WIRE BRUSHES:

FILE CLEANERS

PART NO. SEE TABLE

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

ISO VIEW

WIRE CARD

STIFF BRISTLE BRUSH

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES

DWG NO.DISTRIBUTION STATEMENT A. APPROVED

FOR PUBLIC RELEASE; DISTRIBUTION IS

UNLIMITED.

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. ONLY ITEMS DESCRIBED ON THIS DRAWING

ARE APPROVED FOR USE IN THE APPLICATIONS

SPECIFIED HEREON. A SUBSTITUTE ITEM SHALL

NOT BE USED WITHOUT PRIOR APPROVAL BY

THE QUALIFYING ACTIVITY.

3. IDENTIFICATION OF THE APPROVED SOURCE(S)

OF SUPPLY HEREON IS NOT TO BE CONSTRUED

AS A GUARANTEE OF PRESENT OR CONTINUED

AVAILABILITY AS A SOURCE OF SUPPLY FOR

THE ITEM DESCRIBED ON THE DRAWING.

SOURCE CONTROL DRAWING

VEV2017-06-02ERR K17O3003A

TYPE COLD CHISEL

0720A0000-5

SNAP-ON INDUSTRIAL

2801 80TH ST

KENOSHA, WI 53143

55719 PPC824B 7-1/4" FLAT CHISEL

(L)

(W)

(H)

1 OF 10.0001/1

0720A000059678C

CHISEL, COLD, HAND,

.75 X 7 INCH

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2015-10-26V. VONDERA

2015-10-26J. MILLER

N. FOXENB. VERMULM

2015-07-21N. FOXEN

N. FOXEN

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

MULTIPLEMULTIPLE

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2015-10-26 PRODUCT BASELINE - ERR K15O3007-

SPECIFICATIONS

LENGTH (L) 7 INCHES NOMINAL

HEX BODY SIZE (H) 5/8 INCH

BLADE WIDTH (W) 3/4 INCH

MATERIAL HEAT TREATED ALLOY STEEL

FINISH BLACK OXIDE

SPECIAL FEATURES FLAT OR CONVEX STRIKING

SURFACE

APPROVED SOURCE(S)

PART NO.

VENDOR DATA

NAME & ADDRESS CAGE

CODE

VENDOR

PART NO. VENDOR DESCRIPTION

0720A0000-1 -REMOVED

0720A0000-2

MAYHEW STEEL PRODUCTS, INC.

199 INDUSTRIAL BLVD.

TURNERS FALLS, MA 01376

39068 10212 3/4" BLACK OXIDE COLD

CHISEL

0720A0000-3

SK HAND TOOL, LLC

1600 SOUTH PRAIRIE DRIVE

SYCAMORE, IL 60178

6RYA2 6524 3/4" FLAT CHISEL

0720A0000-4

STANLEY PROTO INDUSTRIAL

2195 E VIEW PKWY STE 103

CONYERS, GA 30013

1CV05 J86A5/8S2 3/4" COLD CHISEL

PART NO. SEE TABLE

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES

DWG NO.DISTRIBUTION STATEMENT A. APPROVED

FOR PUBLIC RELEASE; DISTRIBUTION IS

UNLIMITED.

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. ONLY ITEMS DESCRIBED ON THIS DRAWING

ARE APPROVED FOR USE IN THE APPLICATIONS

SPECIFIED HEREON. A SUBSTITUTE ITEM SHALL

NOT BE USED WITHOUT PRIOR APPROVAL BY

THE QUALIFYING ACTIVITY.

3. IDENTIFICATION OF THE APPROVED SOURCE(S)

OF SUPPLY HEREON IS NOT TO BE CONSTRUED

AS A GUARANTEE OF PRESENT OR CONTINUED

AVAILABILITY AS A SOURCE OF SUPPLY FOR

THE ITEM DESCRIBED ON THE DRAWING.

SOURCE CONTROL DRAWING

VEV2017-10-20ERR K17O3009A

TYPE COLD CHISEL

(L)

(W)

(H)

1 OF 11/1

0720A000159678C

CHISEL, COLD, HAND,

.5 X 6"

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2016-06-08V. VONDERA

2016-06-08B. VERMULM

J. MILLERT. PHILLIS

2015-09-09J. MILLER

J. MILLER

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

MULTIPLEMULTIPLE

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2016-06-08 PRODUCT BASELINE - ERR K16O3009-

SPECIFICATIONS

LENGTH (L) 6 INCHES NOMINAL

HEX BODY SIZE (H) 7/16 INCH

BLADE WIDTH (W) 1/2 INCH

MATERIAL HEAT TREATED ALLOY STEEL

FINISH BLACK OXIDE

SPECIAL FEATURES FLAT OR CONVEX STRIKING

SURFACE

APPROVED SOURCE(S)

PART NO.

VENDOR DATA

NAME & ADDRESS CAGE

CODE

VENDOR

PART NO. VENDOR DESCRIPTION

0720A0001-1 -REMOVED

0720A0001-2

MAYHEW STEEL PRODUCTS, INC.

199 INDUSTRIAL BLVD.

TURNERS FALLS, MA 01376

39068 10205 1/2" BLACK OXIDE COLD

CHISEL

0720A0001-3

S K HAND TOOL LLC

1600 SOUTH PRAIRIE DRIVE

SYCAMORE, IL 60178

6RYA2 6516 1/2" FLAT CHISEL

0720A0001-4

STANLEY PROTO INDUSTRIAL

2195 E VIEW PKWY STE 103

CONYERS, GA 30013

1CV05 J86A7/16S2 1/2" COLD CHISEL

PART NO. SEE TABLE

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES

DWG NO.DISTRIBUTION STATEMENT A. APPROVED

FOR PUBLIC RELEASE; DISTRIBUTION IS

UNLIMITED.

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. ONLY ITEMS DESCRIBED ON THIS DRAWING

ARE APPROVED FOR USE IN THE APPLICATIONS

SPECIFIED HEREON. A SUBSTITUTE ITEM SHALL

NOT BE USED WITHOUT PRIOR APPROVAL BY

THE QUALIFYING ACTIVITY.

3. IDENTIFICATION OF THE APPROVED SOURCE(S)

OF SUPPLY HEREON IS NOT TO BE CONSTRUED

AS A GUARANTEE OF PRESENT OR CONTINUED

AVAILABILITY AS A SOURCE OF SUPPLY FOR

THE ITEM DESCRIBED ON THE DRAWING.

SOURCE CONTROL DRAWING

VEV2017-06-02ERR K17O3003A

TYPE CENTER PUNCH

0720D0000-5

SNAP-ON INDUSTRIAL

2801 80TH ST

KENOSHA, WI 53143

55719 PPC3A 1/8" CENTER PUNCH

(W) (L)

1 OF 10.0003/2

0720D000059678C

PUNCH, CENTER, 5 INCH

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2015-10-26V. VONDERA

2015-10-26J. MILLER

N. FOXENB. VERMULM

2015-07-21N. FOXEN

M. ANDRINGA

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

MULTIPLEMULTIPLE

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2015-10-26 PRODUCT BASELINE - ERR K15O3007-

SPECIFICATIONS

LENGTH (L) 5 INCHES NOMINAL

HEX BODY SIZE (W) 5/16 - 3/8 INCHES

TIP ANGLE 60 TO 90 DEGREES

MATERIAL STEEL ALLOY

FINISH BLACK OXIDE

SPECIAL FEATURES FLAT OR CONVEX STRIKING

SURFACE

APPROVED SOURCE(S)

PART NO.

VENDOR DATA

NAME & ADDRESS CAGE

CODE

VENDOR

PART NO. VENDOR DESCRIPTION

0720D0000-1 -REMOVED

0720D0000-2

MAYHEW STEEL PRODUCTS, INC.

199 INDUSTRIAL BLVD.

TURNERS FALLS, MA 01376

39068 24002 3/8" BLACK OXIDE CENTER

PUNCH

0720D0000-3

SK HAND TOOL, LLC

1600 SOUTH PRAIRIE DRIVE

SYCAMORE, IL 60178

6RYA2 6912 CENTER PUNCH, 3/8"

0720D0000-4

STANLEY PROTO INDUSTRIAL

2195 E VIEW PKWY STE 103

CONYERS, GA 30013

1CV05 J413/8S2 3/8" CENTER PUNCH

PART NO. SEE TABLE

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES

DWG NO.DISTRIBUTION STATEMENT A. APPROVED

FOR PUBLIC RELEASE; DISTRIBUTION IS

UNLIMITED.

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. ONLY ITEMS DESCRIBED ON THIS DRAWING

ARE APPROVED FOR USE IN THE APPLICATIONS

SPECIFIED HEREON. A SUBSTITUTE ITEM SHALL

NOT BE USED WITHOUT PRIOR APPROVAL BY

THE QUALIFYING ACTIVITY.

3. IDENTIFICATION OF THE APPROVED SOURCE(S)

OF SUPPLY HEREON IS NOT TO BE CONSTRUED

AS A GUARANTEE OF PRESENT OR CONTINUED

AVAILABILITY AS A SOURCE OF SUPPLY FOR

THE ITEM DESCRIBED ON THE DRAWING.

SOURCE CONTROL DRAWING

(L)

TYPE HAMMER, DEAD BLOW

HEAD STEEL SHOT FILLED

HANDLE MATERIAL FIBERGLASS INTERIOR

6RYA2 HBFE24 DEAD BLOW 24 OZ SOFT GRIP HAMMER

ISO VIEW

1 OF 11/2

0721E000059678C

HAMMER, DEAD BLOW,

24 OZ

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

ROCK ISLAND, ILLINOIS 61299-5000

V. VONDERA

J. MILLER

K. ROESERJ. MILLER

2018-07-03K. ROESER

K. ROESER

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

MULTIPLEMULTIPLE

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2018-10-04 PRODUCT BASELINE - ERR K18O3003-

SPECIFICATIONS

LENGTH (L) 13 INCH NOMINAL

WEIGHT 24 OZ. NOMINAL

SPECIAL FEATURES NON-SPARKING COATING OVERALL;

CUSHION GRIP

APPROVED SOURCE(S)

PART NO.

VENDOR DATA

NAME & ADDRESS CAGE

CODE

VENDOR

PART NO. VENDOR DESCRIPTION

0721E0000-1

SNAP-ON INDUSTRIAL

2801 80TH ST

KENOSHA, WI 53143

PART NO. SEE TABLE

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES

DWG NO.DISTRIBUTION STATEMENT A. APPROVED

FOR PUBLIC RELEASE; DISTRIBUTION IS

UNLIMITED.

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. ONLY ITEMS DESCRIBED ON THIS DRAWING

ARE APPROVED FOR USE IN THE APPLICATIONS

SPECIFIED HEREON. A SUBSTITUTE ITEM SHALL

NOT BE USED WITHOUT PRIOR APPROVAL BY

THE QUALIFYING ACTIVITY.

3. IDENTIFICATION OF THE APPROVED SOURCE(S)

OF SUPPLY HEREON IS NOT TO BE CONSTRUED

AS A GUARANTEE OF PRESENT OR CONTINUED

AVAILABILITY AS A SOURCE OF SUPPLY FOR

THE ITEM DESCRIBED ON THE DRAWING.

SOURCE CONTROL DRAWING

0731A0000-2

MORSE, M K COMPANY, INC

1101 11TH ST S E

CANTON, OH 44707-3412

61400 330015

DUAL-PURPOSE HACKSAW

GOLDEN TRI-CUT 3-IN-1

BLADE

(D)

1 OF 11.5001/2

0731A000059678C

FRAME, HACKSAW,

12 INCH BLADES

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2016-06-08V. VONDERA

2016-06-08B. VERMULM

J. MILLERT. PHILLIS

2015-09-10J. MILLER

J. MILLER

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

MULTIPLEMULTIPLE

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2016-06-08 PRODUCT BASELINE - ERR K16O3009-

SPECIFICATIONS

TYPE HACKSAW FRAME

FRAME MATERIAL STEEL OR SIMILAR

HANDLE TYPE PISTOL GRIP

BLADE CLEARANCE (D)

3 INCHES MIN MEASURED FROM TEETH OF

BLADE TO NEAREST INSIDE EDGE OF

HACKSAW FRAME

BLADE LENGTH ACCEPTS 12 INCH BLADES

SPECIAL FEATURES

BLADE ADJUSTABLE FOR 90° OR 45°

CUTTING ANGLES; BLADE TENSION

PROVISION; BLADE STORAGE IN HANDLE

APPROVED SOURCE(S)

PART NO.

VENDOR DATA

NAME & ADDRESS CAGE

CODE

VENDOR

PART NO. VENDOR DESCRIPTION

0731A0000-1

KLEIN TOOLS INC.

450 BOND ST

LINCOLNSHIRE, IL 60069

75347 701-S

DUAL-PURPOSE HACKSAW

GOLDEN TRI-CUT 3-IN-1

BLADE

PART NO. SEE TABLE

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES

DWG NO.DISTRIBUTION STATEMENT A. APPROVED

FOR PUBLIC RELEASE; DISTRIBUTION IS

UNLIMITED.

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. ONLY ITEMS DESCRIBED ON THIS DRAWING

ARE APPROVED FOR USE IN THE APPLICATIONS

SPECIFIED HEREON. A SUBSTITUTE ITEM SHALL

NOT BE USED WITHOUT PRIOR APPROVAL BY

THE QUALIFYING ACTIVITY.

3. IDENTIFICATION OF THE APPROVED SOURCE(S)

OF SUPPLY HEREON IS NOT TO BE CONSTRUED

AS A GUARANTEE OF PRESENT OR CONTINUED

AVAILABILITY AS A SOURCE OF SUPPLY FOR

THE ITEM DESCRIBED ON THE DRAWING.

SOURCE CONTROL DRAWING

LENGTH (L) 6 INCH NOMINAL

(L)

1 OF 10.0001/1

0742A000059678C

SAFETY GLASSES, CLEAR,

OVER-THE-GLASSES

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2015-10-26V. VONDERA

2015-10-26J. MILLER

J. MILLERB. VERMULM

2015-07-31J. MILLER

J. MILLER

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

MULTIPLEMULTIPLE

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2015-10-26 PRODUCT BASELINE - ERR K15O3007-

SPECIFICATIONS

TYPE SAFETY GLASSES

LENS MATERIAL CLEAR POLYCARBONATE

LENS THICKNESS 2MM MIN

SPECIAL FEATURES

IMPACT RESISTANT; SCRATCH

RESISTANT; CHEMICAL RESISTANT;

FITS OVER PRESCRIPTION GLASSES

APPLICABLE

SPECIFICATIONS/STANDARDS ANSI Z87

APPROVED SOURCE(S)

PART NO.

VENDOR DATA

NAME & ADDRESS CAGE

CODE

VENDOR

PART NO. VENDOR DESCRIPTION

0742A0000-1

HONEYWELL SAFETY PRODUCTS

900 DOUGLAS PIKE

SMITHFIELD, RI 02917-1879

39SU9 S2500 UVEX ASTRO OTG 3001

PART NO. SEE TABLE

THIS DRAWING WAS GENERATED FROM A SOLID MODEL