Army TDPL 0414A0000-59678 (Attachment 0001).pdf

10/25/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND COVER SHEET 1

PICATINNY ARSENAL, NEW JERSEY 07806-5000

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 0414A0000:59678

DOCUMENT NUMBER : D 0414A0000:59678

SPECIFICATION :

NATIONAL STOCK NO :

CARPENTER'S TOOL KIT (CTK) REQUEST/PRON ID:

TDPL COVER SHEET RELEASED BY:

1. MANUFACTURE AND ACCEPTANCE INSPECTION OF THE ABOVE MATERIAL SHALL BE IN ACCORDANCE WITH ALL DRAWINGS, SPECIFICATIONS AND

OTHER TECHNICAL DATA LISTED IN THIS TDPL.

2. THIS TDPL IS COMPRISED OF THE FOLLOWING SECTIONS WHICH LIST THE DRAWINGS AND ASSOCIATED DOCUMENTS (WITH THEIR REVISION AND AMENDMENT LEVELS) REQUIRED TO PRODUCE, PACKAGE AND INSPECT THE MATERIAL BEING PRODUCED. (NA INDICATES NOT APPLICABLE)

FROM TO

A. PRODUCT DRAWINGS AND ASSOCIATED LISTS ........................................ 0001 0006 B. PACKAGING DRAWINGS AND DOCUMENTS ............................................ N/A C. INSPECTION DRAWINGS AND DOCUMENTS ........................................... 0007 0007 D. SPECIFICATIONS AND STANDARDS ............................................... 0008 0008 E. HAZARDOUS COMPONENT SAFETY DATA STATEMENTS ................................. N/A F. OUTSTANDING APPROVED ENGINEERING CHANGES .................................... N/A G. TDPL NOTE LEGEND ............................................................ 0009 0009

3. DRAWINGS/DOCUMENTS AND ASSOCIATED LISTS LISTED IN THE ABOVE TDPL SECTIONS ARE IDENTIFIED AS TO TYPE BY PREFIX CODES AS FOLLOWS:

CR: Text description not found DX: SOURCE CONTROL

NC: NON CATEGORIZED SPEC QS: SUPPLEMENTAL QUALITY ASSURANCE PROVISION

4. THE SPECIFICATIONS AND STANDARDS SECTION OF THE TDPL IS A COMPILATION OF ALL SPECIFICATIONS AND STANDARDS WHICH ARE ESSENTIAL FOR BIDDING AND MANUFACTURING PURPOSES. THE ABSENCE OF ANY SPECIFICATION OR STANDARD FROM THE LISTING WHICH IS OTHERWISE REFERRED TO IN ANY SPECIFICATION OR STANDARD LISTED THEREIN OR IS CALLED OUT ON A PRODUCT, PACKAGING OR INSPECTION DRAWING IS NOT TO BE CONSTRUED AS CONSTITUTING RELIEF FROM REQUIREMENTS OF THE SPECIFICATIONS. THE REVISION OR AMENDMENT FOR SUCH UNLISTED SPECIFICATIONS AND STANDARDS SHALL BE SPECIFIED IN THE LATEST ISSUE OF DOD INDEX OF SPECIFICATIONS AND STANDARDS IN EFFECT AS OF THE DATE OF THIS TDPL. SUPERCEDED SPECIFICATIONS AND STANDARDS WHICH MAYBE REFERENCED ON DRAWINGS ARE LISTED TOGETHER WITH THE APPROPRIATE SUPERCEDING SPECIFICATION OR STANDARD. WHEN INTERIM CHANGES TO SPECIFICATIONS AND STANDARDS ARE ISSUED (AMENDMENTS, NOTICES OR CHANGE NOTICES), ONLY THE LATEST ISSUE IS LISTED IN THE TDPL. WHERE THESE INTERIM CHANGES ARE NOT CUMULATIVE, ALL

PREVIOUS ISSUES ALSO APPLY, UNLESS THE DOCUMENT ITSELF STATES OTHERWISE.

5. ALL REFERENCES ON DRAWINGS/DOCUMENTS AND ASSOCIATED LISTS TO PICATINNY, FRANKFORD OR ROCK ISLAND ARSENALS WILL BE CONSIDERED AS CHANGED TO COMMANDER, ARDEC, ATTN: RDAR-EIS-P BUILDING 12 ROOM 4, PICATINNY, NJ 07806-5000

6. ALL REFERENCES TO PARTS LISTS ON US ARMY TANK AUTOMOTIVE COMMAND (TACOM) DRAWINGS SHALL BE DISREGARDED

THIS TDPL IS NOT TO BE USED FOR ACQUISITION PURPOSES

10/25/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND COVER SHEET 2

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 0414A0000:59678

DOCUMENT NUMBER : D 0414A0000:59678

SPECIFICATION :

NATIONAL STOCK NO :

CARPENTER'S TOOL KIT (CTK) REQUEST/PRON ID:

TDPL COVER SHEET RELEASED BY:

7. THE HIGHEST SECURITY CLASSIFICATION CONTAINED WITHIN THIS TECHNICAL DATA PACKAGE IS:

"N NON-CLASSIFIED

THE SECURITY CLASSIFICATION OF DRAWINGS/DOCUMENTS, ASSOCIATED LISTS AND SPECIFICATIONS/STANDARDS ARE SHOWN BY CODE UNDER

THE SEC CL COLUMN.

8. DISTRIBUTION STATEMENT: THE MOST RESTRICTIVE DISTRIBUTION STATEMENT CONTAINED WITHIN THIS TDPL IS:

"A DISTR STATEMENT A - APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED

PER DODI 5230.24, CHANGE 1, 2016, ALLOWABLE DISTRIBUTION STATEMENTS ARE:

DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

DISTRIBUTION STATEMENT B: DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES (REASON) (DATE OF DETERMINATION).

OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO (CONTROLLING DoD OFFICE).

DISTRIBUTION STATEMENT C: DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES AND THEIR CONTRACTORS (REASON) (DATED OF DETERMINATION). OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO (CONTROLLING DoD OFFICE).

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DoD CONTRACTORS ONLY (REASON) (DATE OF DETERMINATION). OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO (CONTROLLING DoD OFFICE).

DISTRIBUTION STATEMENT E: DISTRIBUTION AUTHORIZED TO DoD COMPONENTS ONLY (REASON) (DATE OF DETERMINATION). OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO (CONTROLLING DoD OFFICE).

DISTRIBUTION STATEMENT F: FURTHER DISSEMINATION ONLY AS DIRECTED BY (CONTROLLING OFFICE) (DATE OF DETERMINATION) OR HIGHER DoD AUTHORITY.

10/25/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 1

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 0414A0000:59678

DOCUMENT NUMBER : D 0414A0000:59678

SPECIFICATION :

NATIONAL STOCK NO :

CARPENTER'S TOOL KIT (CTK) REQUEST/PRON ID:

PREFIX DRAWING/DOCUMENT -SHEET- D REV DOCUMENT SEC DOCUMENT TITLE NOTE

CODE SIZE CAGE NUMBER NO OF C SYM DATE

PRODUCT DRAWING AND ASSOCIATED LISTS

D 59678 0414A0000 001 0001 A - 10/04/2018 CARPENTER'S TOOL KIT

C 59678 0414A0001 001 0001 A - 10/04/2018 IDENTIFICATION PLATE

C 59678 0414A0002 001 0001 A - 10/04/2018 WARNING MARKING

C 59678 0414A0003 001 0001 A - 10/04/2018 WARRANTY CONTACT INFORMATION LABEL

C 59678 0414A0004 001 0001 A - 10/04/2018 INVENTORY AND WARRANTY MARKING

C 59678 0414A0006 001 0001 A - 07/19/2018 PADLOCK

C 59678 0414B0000 001 0001 A - 10/04/2018 TOOL CHEST

C 59678 0414C0000 001 0001 A - 10/04/2018 FOAM ORGANIZING LINER

D 59678 0414D0000 001 0001 A - 10/04/2018 COMPONENTS LIST, CTK

C 59678 0414D1000 001 0001 A - 07/19/2018 CHISEL AND PUNCH SET, 8 PC

C 59678 0414D1001 001 0001 A - 07/19/2018 FILE SET, 8 PC

C 59678 0414D1002 001 0001 A - 07/19/2018 WOOD CHISEL SET, 6 PIECE

C 59678 0414D1003 001 0001 A - 07/19/2018 SOCKET AND BIT SET, 18 PIECE

C 59678 0414D1004 001 0001 A - 10/04/2018 SOCKET AND BIT SET WITH CASE

C 59678 0414D1005 001 0001 A - 10/04/2018 24" LEVEL AND CASE

C 59678 0414D2000 001 0001 A - 10/04/2018 CASE, SOCKET AND BIT SET

59678 0414E0000 *** 0000 ** 00/00/0000 *** DEFICIENCY ***

59678 0414E0001 *** 0000 ** 00/00/0000 *** DEFICIENCY ***

C 59678 0700D0000 001 0001 A - 07/19/2018 BOX, SMALL PARTS, 24 COMPARTMENTS, PLAST

C 59678 0700E0002 001 0001 - 07/19/2018 TOTE BAG, 15" X 30"

10/25/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 2

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 0414A0000:59678

DOCUMENT NUMBER : D 0414A0000:59678

SPECIFICATION :

NATIONAL STOCK NO :

CARPENTER'S TOOL KIT (CTK) REQUEST/PRON ID:

PREFIX DRAWING/DOCUMENT -SHEET- D REV DOCUMENT SEC DOCUMENT TITLE NOTE

CODE SIZE CAGE NUMBER NO OF C SYM DATE

PRODUCT DRAWING AND ASSOCIATED LISTS

C 59678 0700F0000 001 0001 A - 07/19/2018 TOOL POUCH, CARPENTER'S

C 59678 0700F1000 001 0001 A - 07/19/2018 TOOL ROLL, CARPENTER'S

C 59678 0700F2000 001 0001 A - 07/19/2018 HAMMER HOLSTER, BELT LOOP

C 59678 0700F2001 001 0001 A - 07/19/2018 TAPE MEASURE HOLSTER, BELT LOOP

C 59678 0700H0000 001 0001 A - 07/19/2018 BELT, TOOL

C 59678 0703C0000 001 0001 A - 07/19/2018 SOCKET, 3/8" DRIVE, 1/4", 12-PT

DX C 59678 0703C0001 001 0001 A A 06/02/2017 SOCKET, 3/8" DRIVE, 5/16", 12-PT

DX C 59678 0703C0003 001 0001 A A 06/02/2017 SOCKET, 3/8" DRIVE, 3/8", 12-PT

DX C 59678 0703C0004 001 0001 A A 06/02/2017 SOCKET, 3/8" DRIVE, 7/16", 12-PT

C 59678 0703F0000 001 0001 A - 07/19/2018 1/4" HEX INSERT BIT HOLDER, 3/8" DRIVE, C 59678 0711A1001 001 0001 A - 07/19/2018 PALM STYLE RATCHET, 3/8" DRIVE

DX C 59678 0711B1000 001 0001 A A 06/02/2017 EXTENSION, 3/8" DRIVE, 3"

C 59678 0712E1000 001 0001 A - 07/19/2018 MULTIPURPOSE SCREWDRIVER, NON-RATCHETING C 59678 0713A3005 001 0001 A - 07/19/2018 1/4" HEX DRIVE INSERT BIT, #1 PHILLIPS, C 59678 0713A3006 001 0001 A - 07/19/2018 1/4" HEX DRIVE INSERT BIT, #2 PHILLIPS, C 59678 0713A3007 001 0001 A - 07/19/2018 1/4" HEX DRIVE INSERT BIT, #3 PHILLIPS, C 59678 0713B3005 001 0001 A - 07/19/2018 1/4" HEX INSERT BIT, SLOTTED 5-6

C 59678 0713B3006 001 0001 A - 07/19/2018 1/4" HEX INSERT BIT, SLOTTED 6-8

C 59678 0713B3007 001 0001 A - 07/19/2018 1/4" HEX INSERT BIT, SLOTTED 8-10

C 59678 0713B3008 001 0001 A - 07/19/2018 1/4" HEX INSERT BIT, SLOTTED 10-12

10/25/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 3

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 0414A0000:59678

DOCUMENT NUMBER : D 0414A0000:59678

SPECIFICATION :

NATIONAL STOCK NO :

CARPENTER'S TOOL KIT (CTK) REQUEST/PRON ID:

PREFIX DRAWING/DOCUMENT -SHEET- D REV DOCUMENT SEC DOCUMENT TITLE NOTE

CODE SIZE CAGE NUMBER NO OF C SYM DATE

PRODUCT DRAWING AND ASSOCIATED LISTS

C 59678 0713E3002 001 0001 A - 07/19/2018 1/4" HEX INSERT BIT, TORX, T-15

C 59678 0713E3003 001 0001 A - 07/19/2018 1/4" HEX INSERT BIT, TORX, T-20

C 59678 0713E3004 001 0001 A - 07/19/2018 1/4" HEX INSERT BIT, TORX, T-25

C 59678 0713E3006 001 0001 A - 07/19/2018 1/4" HEX INSERT BIT, TORX, T-30

C 59678 0714E0003 001 0001 A - 07/19/2018 WRENCH, ADJUSTABLE, 1-5/16" X 10", CUSHI C 59678 0718A0001 001 0001 A - 07/19/2018 PLIERS, ADJUSTABLE JOINT, MULTIPLE GROOV C 59678 0718A1002 001 0001 A - 07/19/2018 PLIERS, SLIP JOINT, COMBINATION JAW, 8"

DX C 59678 0718E0000 001 0001 A A 10/20/2017 PLIERS, LINEMAN'S, 8"

DX C 59678 0718F0000 001 0001 A A 06/02/2017 PLIERS, LOCKING, LONG NOSE, 6.5 INCH DX C 59678 0718F0001 001 0001 A A 06/02/2017 PLIERS, LOCKING, CURVED JAW, 10 INCH C 59678 0719B3000 001 0001 A - 07/19/2018 FILE, HAND, TAPER SAW, SINGLE CUT, REGUL DX C 59678 0719C6000 001 0001 A A 06/02/2017 FILE, HAND, THREE SQUARE, DOUBLE CUT, SECOND CUT C 59678 0719D1000 001 0001 A - 07/19/2018 FILE, HAND, HALF ROUND, DOUBLE CUT, BAST C 59678 0719D3001 001 0001 A - 07/19/2018 FILE, HAND, MILL, FLAT, SINGLE CUT, BAST

C 59678 0719D4000 001 0001 A - 07/19/2018 FILE, HAND, ROUND, BASTARD CUT

C 59678 0719J0000 001 0001 A - 07/19/2018 RASP, CABINET, HALF ROUND, SECOND CUT

DX C 59678 0719K0000 001 0001 A - 10/26/2015 HANDLE, FILE, ADJUSTABLE

DX C 59678 0719K1001 001 0001 A A 10/20/2017 FILE CARD AND BRUSH, 10"

DX C 59678 0720A0000 001 0001 A A 10/26/2015 CHISEL, COLD, HAND, .75 X 7 INCH

DX C 59678 0720A0001 001 0001 A A 10/20/2017 CHISEL, COLD, HAND, .5 X 6"

10/25/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 4

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 0414A0000:59678

DOCUMENT NUMBER : D 0414A0000:59678

SPECIFICATION :

NATIONAL STOCK NO :

CARPENTER'S TOOL KIT (CTK) REQUEST/PRON ID:

PREFIX DRAWING/DOCUMENT -SHEET- D REV DOCUMENT SEC DOCUMENT TITLE NOTE

CODE SIZE CAGE NUMBER NO OF C SYM DATE

PRODUCT DRAWING AND ASSOCIATED LISTS

C 59678 0720A0003 001 0001 A - 07/19/2018 CHISEL, COLD, HAND, .375 X 5.5"

C 59678 0720A0004 001 0001 A - 07/19/2018 CHISEL, COLD, HAND, .625 X 6.75"

C 59678 0720A0005 001 0001 A - 07/19/2018 CHISEL, COLD, HAND, .875 X 8"

C 59678 0720A0006 001 0001 A - 07/19/2018 CHISEL, COLD, HAND, 1 X 8"

DX C 59678 0720D0000 001 0001 A A 06/02/2017 PUNCH, CENTER, 5 INCH

C 59678 0720D0001 001 0001 A - 07/19/2018 PUNCH, CENTER, AUTOMATIC, 4.5 INCH

C 59678 0720G0000 001 0001 A - 07/19/2018 KIT, NAIL SET, 3 PC

C 59678 0720H0003 001 0001 A - 07/19/2018 NAIL PULLER, DOUBLE PAW

C 59678 0720H0004 001 0001 A - 07/19/2018 PRY BAR, COMBINATION

C 59678 0720K0000 001 0001 A - 07/19/2018 WOOD CHISEL, 1/4" TIP

C 59678 0720K0001 001 0001 A - 07/19/2018 WOOD CHISEL, 1/2" TIP

C 59678 0720K0002 001 0001 A - 07/19/2018 WOOD CHISEL, 3/4" TIP

C 59678 0720K0003 001 0001 A - 07/19/2018 WOOD CHISEL, 1" TIP

C 59678 0720K0004 001 0001 A - 07/19/2018 WOOD CHISEL, 1-1/4" TIP

C 59678 0720K0005 001 0001 A - 07/19/2018 WOOD CHISEL, 1-1/2" TIP

C 59678 0721A0000 001 0001 A - 07/19/2018 HAMMER, CLAW, 16 OZ

C 59678 0721A0001 001 0001 A - 07/19/2018 HAMMER, FRAMING, 24 OZ

C 59678 0721B1000 001 0001 A - 07/19/2018 HAMMER, HAND, CROSS PEEN, 48 OZ

C 59678 0721E0000 001 0001 A - 07/19/2018 HAMMER, DEAD BLOW, 24 OZ

C 59678 0728G0001 001 0001 A - 07/19/2018 LINE LEVEL, ALUMINUM, 3 INCH

10/25/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 5

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 0414A0000:59678

DOCUMENT NUMBER : D 0414A0000:59678

SPECIFICATION :

NATIONAL STOCK NO :

CARPENTER'S TOOL KIT (CTK) REQUEST/PRON ID:

PREFIX DRAWING/DOCUMENT -SHEET- D REV DOCUMENT SEC DOCUMENT TITLE NOTE

CODE SIZE CAGE NUMBER NO OF C SYM DATE

PRODUCT DRAWING AND ASSOCIATED LISTS

C 59678 0728K0000 001 0001 A - 07/19/2018 RAFTER SQUARE, 7"

C 59678 0728K0001 001 0001 A - 07/19/2018 RAFTER SQUARE, 12"

C 59678 0728K0002 001 0001 A - 07/19/2018 CARPENTER'S SQUARE

C 59678 0728L0002 001 0001 A - 07/19/2018 TAPE MEASURE, 25 FT

C 59678 0728L0003 001 0001 A - 07/19/2018 TAPE MEASURE, 100 FT

C 59678 0728M0000 001 0001 A - 07/19/2018 T-BEVEL, SLIDING

C 59678 0728M0001 001 0001 A - 07/19/2018 LAYOUT TWINE, 1000 FOOT, NYLON, BRAIDED

C 59678 0728M0002 001 0001 A - 07/19/2018 PLUMB BOB, 16 OZ

DX C 59678 0731A0000 001 0001 A - 06/08/2016 FRAME, HACKSAW, 12 INCH BLADES

C 59678 0731A1001 001 0001 A - 07/19/2018 HACKSAW BLADE, 12" LONG, 24 TPI, 10-PK

C 59678 0731B0003 001 0001 A - 07/19/2018 JAB SAW, WALLBOARD

C 59678 0731D0000 001 0001 A - 07/19/2018 KNIFE, UTILITY

C 59678 0731D1001 001 0001 A - 07/19/2018 BLADE, RAZOR, HOOK TIPS

C 59678 0731D1002 001 0001 A - 07/19/2018 BLADE, RAZOR, UTILITY, STRAIGHT

C 59678 0731J0001 001 0001 A - 07/19/2018 WOOD RASP, HAND PLANE, 10 INCH

C 59678 0731J0002 001 0001 A - 07/19/2018 HAND SAW, CARPENTRY

DX C 59678 0732A0000 001 0001 A - 07/19/2018 SHARPENING STONE, COARSE AND FINE, 8"

C 59678 0732B1000 001 0001 A - 07/19/2018 SANDING BLOCK

C 59678 0733E0001 001 0001 A - 07/19/2018 TAPING KNIFE, 6 INCH

C 59678 0733E0002 001 0001 A - 07/19/2018 PUTTY KNIFE, 1.5 INCH

10/25/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 6

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 0414A0000:59678

DOCUMENT NUMBER : D 0414A0000:59678

SPECIFICATION :

NATIONAL STOCK NO :

CARPENTER'S TOOL KIT (CTK) REQUEST/PRON ID:

PREFIX DRAWING/DOCUMENT -SHEET- D REV DOCUMENT SEC DOCUMENT TITLE NOTE

CODE SIZE CAGE NUMBER NO OF C SYM DATE

PRODUCT DRAWING AND ASSOCIATED LISTS

C 59678 0733J0000 001 0001 A - 07/19/2018 CHALK LINE AND REEL

C 59678 0733J1000 001 0001 A - 07/19/2018 CHALK REFILL

C 59678 0733L0002 001 0001 A - 07/19/2018 COMBINATION STAPLE GUN, BRAD NAILER, HEA

C 59678 0733L0003 001 0001 A - 07/19/2018 3/8"" STAPLES

C 59678 0733L0004 001 0001 A - 07/19/2018 1/2" STAPLES

C 59678 0733L0005 001 0001 A - 07/19/2018 BRADS, 9/16"

C 59678 0736B0000 001 0001 A - 07/19/2018 HATCHET, SHINGLING

DX C 59678 0742A0000 001 0001 A - 10/26/2015 SAFETY GLASSES, CLEAR, OVER-THE-GLASSES LAMP

C 59678 0746A0000 001 0001 A - 07/19/2018 PENCIL, CARPENTER'S

10/25/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 7

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 0414A0000:59678

DOCUMENT NUMBER : D 0414A0000:59678

SPECIFICATION :

NATIONAL STOCK NO :

CARPENTER'S TOOL KIT (CTK) REQUEST/PRON ID:

PREFIX DRAWING/DOCUMENT -SHEET- D REV DOCUMENT SEC DOCUMENT TITLE NOTE

CODE SIZE CAGE NUMBER NO OF C SYM DATE

INSPECTION DRAWINGS AND DOCUMENTS

QS A 59678 0414E0000 001 0001 A - 10/04/2018 CARPENTER'S TOOL KIT

QS A 59678 0414E0001 001 0001 A - 10/04/2018 TOOL CHEST

10/25/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 8

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 0414A0000:59678

DOCUMENT NUMBER : D 0414A0000:59678

SPECIFICATION :

NATIONAL STOCK NO :

CARPENTER'S TOOL KIT (CTK) REQUEST/PRON ID:

QPL DOCUMENT D REV AMD CHG SUPPL DOCUMENT SEC DOCUMENT TITLE NOTE

CODE NUMBER C SYM NO. NO. NO. DATE

SPECIFICATIONS AND STANDARDS

MIL-STD-810 A H 1 01/31/2019 ENVIRONMENTAL ENGR CONSID LAB TESTS *

ANSI-Z87.1 - 01/01/1989 PRACTICE FOR-OCUPATIONAL & EDUCATIONAL E **

ASME-B107.110 - 01/01/2012 SOCKET WRENCHES, HANDLES AND ATTACHMENTS **

ASME-B107.500 - 01/01/2010 PLIERS **

ASME-B107.500 - 01/01/2010 PLIERS **

ASME-B107.20 (REPLACED BY ASME-B107.500 ) **

ASME-Y14.100 A - 11/14/2017 ENGINEERING DRAWING PRACTICES **

ASME-Y14.100M (REPLACED BY ASME-Y14.100 ) **

ASME-Y14.100 A - 11/14/2017 ENGINEERING DRAWING PRACTICES **

ASME-Y14.5 A - 01/01/2018 DIMENSIONING AND TOLERANCING **

ASME-Y14.5M (REPLACED BY ASME-Y14.5 ) **

ASME-Y14.5 A - 01/01/2018 DIMENSIONING AND TOLERANCING **

ASME-Y14.5.1M A - 01/01/2004 DIMENSIONING AND TOLERANCING **

A-A-2322 A 05/30/2003 FILE,......... CNX ***

10/25/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 9

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 0414A0000:59678

DOCUMENT NUMBER : D 0414A0000:59678

SPECIFICATION :

NATIONAL STOCK NO :

CARPENTER'S TOOL KIT (CTK) REQUEST/PRON ID:

TDPL NOTE LEGEND

DESCRIPTION OF SYMBOLS IN THE NOTE LEGEND

* -Not Furnished - To be obtained from Defense Logistics Agency (DLA) Document Services, http://quicksearch.dla.mil or https://assist.dla.mil

** -Not Furnished - Commercial specifications and standards may be obtained from the publishers. They are not available from government sources.

*** -Not Furnished - Supplied only upon request submitted to the procuring contract officer.

**** -Not Furnished - Supplied only by request to program/project manager.

REF - Reference Drawing.

Q - The Letter (Q) before the specification number indicates that a qualified products list is required. The number of the QPL is the same as the number of the specification

CS - Computer Software Document - The print of this drawing included in the technical data package is not to be used for manufacture. A computer software program on CD, DVD or via a website or FTP will be furnished by the procuring contracting officer upon request.

SB - Stable Base Drawing - The print of this drawing included in the technical data package is not to be used for manufacture. A stable master will be furnished by the procuring contracting officer upon request.

G - Government Furnished Equipment or Material.